DT bindings and binding definitions for the Renesas RZ/V2N (R9A09G056)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ/zMdQAKCRCKwlD9ZEnx
cPigAP97UeFb9VLWbPeUMSm6A2aPz4loif/U0G+SsYIe10CYgAEA17AYkjokTNGz
dOLVl3cj7EW6jIhuXmmK1/49Xc97IgU=
=fEuX
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g056-dt-binding-defs-tag1' into renesas-dts-for-v6.16
Renesas RZ/V2N DT Bindings and Definitions
DT bindings and binding definitions for the Renesas RZ/V2N (R9A09G056)
SoC, shared by driver and DT source files.
The clock structure for RZ/V2N is almost identical to RZ/V2H(P) SoC
with less IP blocks compared to RZ/V2H(P). For eg: CRU2/3 are present
only on the RZ/V2H(P) SoC.
Add minimal clock and reset entries required to boot the Renesas
RZ/V2N EVK and binds it with the RZ/V2H CPG family driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
DT bindings and binding definitions for the Renesas RZ/V2N (R9A09G056)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ/zMdQAKCRCKwlD9ZEnx
cPigAP97UeFb9VLWbPeUMSm6A2aPz4loif/U0G+SsYIe10CYgAEA17AYkjokTNGz
dOLVl3cj7EW6jIhuXmmK1/49Xc97IgU=
=fEuX
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g056-dt-binding-defs-tag1' into renesas-clk-for-v6.16
Renesas RZ/V2N DT Bindings and Definitions
DT bindings and binding definitions for the Renesas RZ/V2N (R9A09G056)
SoC, shared by driver and DT source files.
Reorder the compatible entries in `rzv2h_cpg_match[]` to follow a
numerical sequence based on the SoC part numbers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a new Kconfig option, ARCH_R9A09G056, to enable ARM64 platform support
for the Renesas RZ/V2N SoC. Default this option to "y" when ARCH_RENESAS is
enabled, ensuring that support for the RZ/V2N SoC is automatically included.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250317131923.238374-15-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The helper tests the dma_buf
itself while import_attach is just an artifact of the import. Prepares
to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250317131923.238374-14-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The helper tests the dma_buf
itself while import_attach is just an artifact of the import. Prepares
to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250317131923.238374-10-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The helper tests the dma_buf
itself while import_attach is just an artifact of the import. Prepares
to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250317131923.238374-9-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The helper tests the dma_buf
itself while import_attach is just an artifact of the import. Prepares
to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250317131923.238374-7-tzimmermann@suse.de
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20250317131923.238374-4-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The helper tests the dma_buf
itself while import_attach is just an artifact of the import. Prepares
to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20250317131923.238374-3-tzimmermann@suse.de
Add documentation for the pin controller found on the Renesas RZ/V2N
(R9A09G056) SoC. The RZ/V2N PFC differs slightly from the RZ/G2L family
and is almost identical to the RZ/V2H(P) SoC, except that the RZ/V2H(P) SoC
has an additional dedicated pin.
To account for this, a SoC-specific compatible string,
'renesas,r9a09g056-pinctrl', is introduced for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the device tree bindings for the Renesas RZ/V2N (R9A09G056)
SoC Clock Pulse Generator (CPG).
Update `renesas,rzv2h-cpg.yaml` to include the compatible string for
RZ/V2N SoC and adjust the title and description accordingly.
Additionally, introduce `renesas,r9a09g056-cpg.h` to define core clock
constants for the RZ/V2N SoC. Note the existing RZ/V2H(P) family-specific
clock driver will be reused for this SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the RZ/V2N (R9A09G056) variant to the existing RZ/V2H(P) System
Controller (SYS) binding, as both IPs are very similar.
However, they have different SoC IDs, and the RZ/V2N does not have
PCIE1 configuration registers, unlike the RZ/V2H(P) SYS IP. To handle
these differences, introduce a new compatible string
`renesas,r9a09g056-sys`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the Renesas RZ/V2N (R9A09G056) SoC variants, distinguishing
between configurations with and without specific hardware features such
as GPU, ISP, and cryptographic extensions. Also, document the
"renesas,rzv2n-evk" compatible string for the RZ/V2N EVK board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Presently we start garbage collection late - when we start running
out of free zones to backfill max_open_zones. This is a reasonable
default as it minimizes write amplification. The longer we wait,
the more blocks are invalidated and reclaim cost less in terms
of blocks to relocate.
Starting this late however introduces a risk of GC being outcompeted
by user writes. If GC can't keep up, user writes will be forced to
wait for free zones with high tail latencies as a result.
This is not a problem under normal circumstances, but if fragmentation
is bad and user write pressure is high (multiple full-throttle
writers) we will "bottom out" of free zones.
To mitigate this, introduce a zonegc_low_space tunable that lets the
user specify a percentage of how much of the unused space that GC
should keep available for writing. A high value will reclaim more of
the space occupied by unused blocks, creating a larger buffer against
write bursts.
This comes at a cost as write amplification is increased. To
illustrate this using a sample workload, setting zonegc_low_space to
60% avoids high (500ms) max latencies while increasing write
amplification by 15%.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_buf_free can call vunmap, which can sleep. The vunmap path is an
unlikely one, so add might_sleep to ensure calling xfs_buf_free from
atomic context gets caught more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Marking a log item as failed kept a buffer reference around for
resubmission of inode and dquote items.
For inode items commit 298f7bec50 ("xfs: pin inode backing buffer to
the inode log item") started pinning the inode item buffers
unconditionally and removed the need for this. Later commit acc8f8628c
("xfs: attach dquot buffer to dquot log item buffer") did the same for
dquot items but didn't fully clean up the xfs_clear_li_failed side
for them. Stop adding the extra pin for dquot items and remove the
helpers.
This happens to fix a call to xfs_buf_free with the AIL lock held,
which would be incorrect for the unlikely case freeing the buffer
ends up calling vfree.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Set default limit on the number of pixels for adapters without
vendor firmware descriptor. The devices work as expected, they
just don't provide any description.
If parsing the vendor firmware descriptor fails, the device falls
back to the given default limits. Failing to allocate memory is
still an error.
v2:
- fix typo in constant (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-10-tzimmermann@suse.de
Rewrite the parser for the vendor firmware descriptor with the
following improvements.
- Validate the key-value length given in a vendor descriptor
against the length of the descriptor. The current code fails
to do this and might read more bytes than available. This can
lead to out-of-bounds reads of the allocated buffer.
- Read raw data with helpers for unaligned data. This allows
the code to run on platforms that do now support unaligned memory
access by default.
- Validate the pixel limit against a default value. The default
comes from real-world devices. If the reported number of pixels
is significantly above the limit, it is likely invalid.
- Drop the obsolete print macros. There is still a warning about
invalid firmware descriptors. The rest of the output is bogus.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-9-tzimmermann@suse.de
The vendor descriptor is an array of unsigned bytes. It is raw data
that is not to be modified. Declare it as 'const u8'.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-8-tzimmermann@suse.de
There need to be least 5 bytes in the vendor descriptor. Return
an error otherwise. Also change the branching to early-out on
the error. Adjust indention of the rest of the parser function.
The original length test expected more than 5 bytes in the vendor
descriptor. As a descriptor with no key-value pairs has exactly 5
bytes and is still valid, change the test to accept this case as
well.
v2
- clarify changes to length test in commit description (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-7-tzimmermann@suse.de
Reading the vendor descriptor from the udl device can fail with
an error, which the current code fails to capture. Store the return
value in an integer and test for the error. Abort parsing on errors
or treat the value as length on success.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-6-tzimmermann@suse.de
Store sku_pixel_limit as type unsigned long instead of int. The
number of pixels available is always positive.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-5-tzimmermann@suse.de
Push upcasts from struct drm_device to struct udl_device outwards
in the call chain; cast earlier and call functions with the upcasted
value. Improves type safety.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-4-tzimmermann@suse.de
The keys are connected to the I2C GPIO extender which has the interrupt
pin not connected. So, we need to poll.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-12-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The actual sensor might differ, but all known are LM75B compatible.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-10-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Schematics mention a 24cs64 on the bus, but I definitely have only a
24c64. So, it is only mentioned as a comment.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-9-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
To match the documentation and schematics, they are numbered from 1 and
not from 0.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-8-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Share efidrm's and vesadrm's validation of struct screen_info in
shared helpers. Update the drivers.
Most validation helpers test individual values against limits and
can be shared as they are. For color formats, a common helper looks
up the correct DRM format info from a driver-provided list of color
formats.
These screen_info helpers are only available if CONFIG_SCREEN_INFO
has been selected, as done by efidrm and vesadrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-4-tzimmermann@suse.de
Provide sysfb helpers for validating framebuffer integer values
against limits. Update drivers. If a driver did not specify a limit
for a certain value, use INT_MAX.
v2:
- declare module information near EOF (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-3-tzimmermann@suse.de
Split drm_sysfb_helper.c into two source files. There's now one
source file for the mode-setting pipeline and one source file for
module meta data. Prepares for adding additional source code to
sysfb helpers.
v2:
- fix typo in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-2-tzimmermann@suse.de
The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this
configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb.
It adds support for the 2 additional switch ports (port C and D) that are
available on that board.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[Thomas: move the DTS to the Renesas directory, declare the PHY LEDs]
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/20250324-rzn1d400-eb-v4-1-d7ebbbad1918@bootlin.com
[wsa: Correct LAN LED nodes]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250411095425.1842-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Missed this UML wrapper in the rename.
Fixes: 6e4955a9d7 ("x86/alternatives: Rename 'text_poke_sync()' to 'smp_text_poke_sync_each_cpu()'")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/202504141003.kc69fVoj-lkp@intel.com
- There's no need for a newline after the SPDX line
- But there's a need for one before the closing header guard.
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250413084144.3746608-6-mingo@kernel.org
Handle typeof_unqual, __typeof_unqual and __typeof_unqual__ keywords
using TYPEOF_KEYW token in the same way as typeof keyword.
Also ignore x86 __seg_fs and __seg_gs named address space qualifiers
using X86_SEG_KEYW token in the same way as const, volatile or
restrict qualifiers.
Fixes: ac053946f5 ("compiler.h: introduce TYPEOF_UNQUAL() macro")
Closes: https://lore.kernel.org/lkml/81a25a60-de78-43fb-b56a-131151e1c035@molgen.mpg.de/
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20250413220749.270704-1-ubizjak@gmail.com
Instead of setting bit 1 (USI_OPTION_CLKSTOP_ON) during USI unconfiguring,
all the other bits in the USI_OPTION register get inverted, which
should not happen as that means the clock will keep getting provided
to the USI IP. Remove the unnecessary tilde.
Fixes: 11e77776b5 ("soc: samsung: usi: add a routine for unconfiguring the ip")
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250413163755.788907-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
A few uses of 'fps' snuck in, which is rather confusing
(to me) as it suggests frames-per-second. ;-)
Rename them to the canonical 'fpstate' name.
No change in functionality.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-9-mingo@kernel.org
init_task's FPU state initialization was a bit of a hack:
__x86_init_fpu_begin = .;
. = __x86_init_fpu_begin + 128*PAGE_SIZE;
__x86_init_fpu_end = .;
But the init task isn't supposed to be using the FPU context
in any case, so remove the hack and add in some debug warnings.
As Linus noted in the discussion, the init task (and other
PF_KTHREAD tasks) *can* use the FPU via kernel_fpu_begin()/_end(),
but they don't need the context area because their FPU use is not
preemptible or reentrant, and they don't return to user-space.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250409211127.3544993-8-mingo@kernel.org
