Add a test case for FQ_CODEL with QFQ parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-3-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with HTB parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-2-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=pJLt
-----END PGP SIGNATURE-----
Merge tag 'irqdomain-04-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into gpio/for-next
Stable tag for the GPIO tree to pull from
After making all ->qlen_notify() callbacks idempotent, now it is safe to
remove the check of qlen!=0 from both fq_codel_dequeue() and
codel_qdisc_dequeue().
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Fixes: 4b549a2ef4 ("fq_codel: Fair Queue Codel AQM")
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211636.166257-1-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
est_qlen_notify() deletes its class from its active list with
list_del() when qlen is 0, therefore, it is not idempotent and
not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250403211033.166059-6-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
qfq_qlen_notify() always deletes its class from its active list
with list_del_init() _and_ calls qfq_deactivate_agg() when the whole list
becomes empty.
To make it idempotent, just skip everything when it is not in the active
list.
Also change other list_del()'s to list_del_init() just to be extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-5-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hfsc_qlen_notify() is not idempotent either and not friendly
to its callers, like fq_codel_dequeue(). Let's make it idempotent
to ease qdisc_tree_reduce_backlog() callers' life:
1. update_vf() decreases cl->cl_nactive, so we can check whether it is
non-zero before calling it.
2. eltree_remove() always removes RB node cl->el_node, but we can use
RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drr_qlen_notify() always deletes the DRR class from its active list
with list_del(), therefore, it is not idempotent and not friendly
to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-3-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
htb_qlen_notify() always deactivates the HTB class and in fact could
trigger a warning if it is already deactivated. Therefore, it is not
idempotent and not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-2-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The GPIOD_FLAGS_BIT_NONEXCLUSIVE flag and devm_gpiod_unhinge() function
should be replaced with a better solution. The pwrseq subsystem is a good
candidate. GPIOs themselves should remain a unique resource. Add a task
for tracking the removal of these deprecated symbols.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-4-7c1380797b0d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge as keywords to
the GPIO entry so that we get notified if anybody tries to use these
deprecated symbols. We'll drop them from here once we remove them from
the kernel.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-3-7c1380797b0d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function was introduced as a workaround for an issue with resource
ownership in the regulator subsystem. Rather than passing the ownership
of a GPIO, we should make the regulator core be able to deal with
resources it didn't request. Deprecate this function so that we don't
get more users in the tree.
Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-2-7c1380797b0d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The non-exclusive GPIO request flag looks like a functional feature but
is in fact a workaround for a corner-case that got out of hand. It should
be removed so deprecate it officially so that nobody uses it anymore.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-1-7c1380797b0d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Rename PLL field extraction macros to include the associated register name
(`CPG_PLL_CLK1` or `CPG_PLL_CLK2`) to maintain consistency with other PLL
register macros. Update all corresponding macro references accordingly.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some RZ/V2H(P) SoC variants do not have a GPU, resulting in PLLGPU being
disabled by default in TF-A. Add support for enabling PLL clocks in the
RZ/V2H(P) CPG driver to manage this.
Introduce `is_enabled` and `enable` callbacks to handle PLL state
transitions. With the `enable` callback, PLLGPU will be turned ON only
when the GPU node is enabled; otherwise, it will remain off. Define new
macros for PLL standby and monitor registers to facilitate this process.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Remove the redundant `type` field from `struct pll_clk`, as it is not used
in the PLL clock handling logic.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refactor PLL handling by introducing a `struct pll` to encapsulate PLL
configuration parameters, ensuring consistency with the existing dynamic
divider structure.
Introduce the `PLL_PACK()` macro to simplify PLL structure initialization
and update the `DEF_PLL()` macro to use the new `pll` structure. Modify
relevant clock register functions to utilize the structured PLL data
instead of raw configuration values.
This refactoring improves code readability, maintainability, and
alignment with the existing clock configuration approach.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.
This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns.
Fixes: 365ad353c2 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250403092431.514063-1-tung.quang.nguyen@est.tech
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The recent reordering of code in sev_ioctl_do_pdh_export triggered
a false-positive may-be-uninitialized warning from gcc:
In file included from ../include/linux/sched/task.h:13,
from ../include/linux/sched/signal.h:9,
from ../include/linux/rcuwait.h:6,
from ../include/linux/percpu-rwsem.h:7,
from ../include/linux/fs.h:34,
from ../include/linux/compat.h:17,
from ../arch/x86/include/asm/ia32.h:7,
from ../arch/x86/include/asm/elf.h:10,
from ../include/linux/elf.h:6,
from ../include/linux/module.h:19,
from ../drivers/crypto/ccp/sev-dev.c:11:
In function ‘copy_to_user’,
inlined from ‘sev_ioctl_do_pdh_export’ at ../drivers/crypto/ccp/sev-dev.c:2036:7,
inlined from ‘sev_ioctl’ at ../drivers/crypto/ccp/sev-dev.c:2249:9:
../include/linux/uaccess.h:225:16: warning: ‘input_cert_chain_address’ may be used uninitialized [-Wmaybe-uninitialized]
225 | return _copy_to_user(to, from, n);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/crypto/ccp/sev-dev.c: In function ‘sev_ioctl’:
../drivers/crypto/ccp/sev-dev.c:1961:22: note: ‘input_cert_chain_address’ was declared here
1961 | void __user *input_cert_chain_address;
| ^~~~~~~~~~~~~~~~~~~~~~~~
Silence it by moving the initialisation of the variables in question
prior to the NULL check.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than setting up the fallback request by hand, use
ahash_request_set_callback() and ahash_request_set_crypt() API helpers
to properly setup the new request.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add IS_ENABLED(CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG) checks before the
fallback counter updates to make sure the code is not included when
debugfs statistics support is not enabled.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'struct sun8i_ce_alg_template' is always defined, even with
CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG disabled, so the ifdef guards
are not needed.
Make sure the statistics have IS_ENABLED() checks instead.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to reduce code duplication, factor out to a separate function
the codepath that increments debugfs fallback stats.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove duplicated fallback checks in sun8i_ce_hash_digest(). The same
checks are already done previously in sun8i_ce_hash_need_fallback().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rework error handling in sun8i_ce_hash_run() to unmap the dma buffers in
case of failure. Currently, the dma unmap functions are not called if the
function errors out at various points.
Fixes: 56f6d5aee8 ("crypto: sun8i-ce - support hash algorithms")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SNP initialization is forced during PSP driver probe purely because SNP
can't be initialized if VMs are running. But the only in-tree user of
SEV/SNP functionality is KVM, and KVM depends on PSP driver for the same.
Forcing SEV/SNP initialization because a hypervisor could be running
legacy non-confidential VMs make no sense.
This patch removes SEV/SNP initialization from the PSP driver probe
time and moves the requirement to initialize SEV/SNP functionality
to KVM if it wants to use SEV/SNP.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move platform initialization of SEV/SNP from CCP driver probe time to
KVM module load time so that KVM can do SEV/SNP platform initialization
explicitly if it actually wants to use SEV/SNP functionality.
Add support for KVM to explicitly call into the CCP driver at load time
to initialize SEV/SNP. If required, this behavior can be altered with KVM
module parameters to not do SEV/SNP platform initialization at module load
time. Additionally, a corresponding SEV/SNP platform shutdown is invoked
during KVM module unload time.
Continue to support SEV deferred initialization as the user may have the
file containing SEV persistent data for SEV INIT_EX available only later
after module load/init.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a extraneous space after a newline in a mtk_venc_debug message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The VIDIOC_ENUM_FRAMESIZES ioctl should return all frame sizes (i.e.
width and height in pixels) that the device supports for the given pixel
format.
It doesn't make a lot of sense to return the frame-sizes in a stepwise
manner, which is used to enforce hardware alignments requirements for
CAPTURE buffers, for coded formats.
Instead, applications should receive an indication, about the maximum
supported frame size for that hardware decoder, via a continuous
frame-size enumeration.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Suggested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add an enum rkvdec_image_fmt used to signal an image format, e.g.
4:2:0 8-bit, 4:2:0 10-bit or any.
Tag each supported CAPUTRE format with an image format and use this tag
to filter out unsupported CAPTURE formats.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a rkvdec_is_valid_fmt() helper that check if a fourcc is a supported
CAPTURE format, and a rkvdec_enum_decoded_fmt() helper that enumerates
valid formats.
This moves current code into helper functions in preparation for adding
CAPTURE format filtering and validation in next patch.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move rkvdec_reset_decoded_fmt() and the called rkvdec_reset_fmt() helper
functions in preparation for adding a new caller in an upcoming patch.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Extract call to v4l2_fill_pixfmt_mp() and ajusting of sizeimage into a
helper. Replace current code with a call to the new helper.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some SPS/PPS parameters are currently hardcoded in the driver even
though they exist in the stable uapi controls.
Use values from SPS/PPS controls instead of hardcoding them.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
[jonas@kwiboo.se: constraint_set_flags condition, commit message]
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use bytesperline and buffer height to calculate the strides configured.
This does not really change anything other than ensuring the
bytesperline that is signaled to userspace matches what is configured
in HW.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for
10-bit buffers.
NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to
NV12 and NV16, using 10-bit components with no padding between each
component. Instead, a group of 4 luminance/chrominance samples are
stored over 5 bytes in little endian order:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '15' and '20' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a
multiple of 8 for NV15 and 4 for NV20.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add helper functions to calculate plane bytesperline and sizeimage,
these new helpers consider bpp div, block width and height when
calculating plane bytesperline and sizeimage.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
By default the amphion decoder will pre-parse 3 frames before starting
to decode the first frame. Alternatively, a block of flush padding data
can be appended to the frame, which will ensure that the decoder can
start decoding immediately after parsing the flush padding data, thus
potentially reducing decoding latency.
This mode was previously only enabled, when the display delay was set to
0. Allow the user to manually toggle the use of that mode via a module
parameter called low_latency, which enables the mode without
changing the display order.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The amphion decoder firmware supports a low latency flush mode for the
HEVC format since v1.9.0. This feature, which is enabled when the
display delay is set to 0, can help to reduce the decoding latency by
appending some padding data to every frame.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Objtool uses an arbitrary rule for INSN_SYSCALL and INSN_SYSRET that
almost works by accident: if it's in a function, control flow continues
after the instruction, otherwise it terminates.
That behavior should instead be based on the semantics of the underlying
instruction. Change INSN_SYSCALL to always preserve control flow and
INSN_SYSRET to always terminate it.
The changed semantic for INSN_SYSCALL requires a tweak to the
!CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat(). In Xen,
SYSCALL is a hypercall which usually returns. But in this case it's a
hypercall to IRET which doesn't return. Add UD2 to tell objtool to
terminate control flow, and to prevent undefined behavior at runtime.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com> # for the Xen part
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/19453dfe9a0431b7f016e9dc16d031cad3812a50.1744095216.git.jpoimboe@kernel.org
INSN_CONTEXT_SWITCH is ambiguous. It can represent both call semantics
(SYSCALL, SYSENTER) and return semantics (SYSRET, IRET, RETS, RETU).
Those differ significantly: calls preserve control flow whereas returns
terminate it.
Objtool uses an arbitrary rule for INSN_CONTEXT_SWITCH that almost works
by accident: if in a function, keep going; otherwise stop. It should
instead be based on the semantics of the underlying instruction.
In preparation for improving that, split INSN_CONTEXT_SWITCH into
INSN_SYCALL and INSN_SYSRET.
No functional change.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/19a76c74d2c051d3bc9a775823cafc65ad267a7a.1744095216.git.jpoimboe@kernel.org
