Introduce two new sysctls, "default_request_timeout" and
"max_request_timeout". These control how long (in seconds) a server can
take to reply to a request. If the server does not reply by the timeout,
then the connection will be aborted. The upper bound on these sysctl
values is 65535.
"default_request_timeout" sets the default timeout if no timeout is
specified by the fuse server on mount. 0 (default) indicates no default
timeout should be enforced. If the server did specify a timeout, then
default_request_timeout will be ignored.
"max_request_timeout" sets the max amount of time the server may take to
reply to a request. 0 (default) indicates no maximum timeout. If
max_request_timeout is set and the fuse server attempts to set a
timeout greater than max_request_timeout, the system will use
max_request_timeout as the timeout. Similarly, if default_request_timeout
is greater than max_request_timeout, the system will use
max_request_timeout as the timeout. If the server does not request a
timeout and default_request_timeout is set to 0 but max_request_timeout
is set, then the timeout will be max_request_timeout.
Please note that these timeouts are not 100% precise. The request may
take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond the set max
timeout due to how it's internally implemented.
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0
$ echo 65536 | sudo tee /proc/sys/fs/fuse/default_request_timeout
tee: /proc/sys/fs/fuse/default_request_timeout: Invalid argument
$ echo 65535 | sudo tee /proc/sys/fs/fuse/default_request_timeout
65535
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 65535
$ echo 0 | sudo tee /proc/sys/fs/fuse/default_request_timeout
0
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0
[Luis Henriques: Limit the timeout to the range [FUSE_TIMEOUT_TIMER_FREQ,
fuse_max_req_timeout]]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There are situations where fuse servers can become unresponsive or
stuck, for example if the server is deadlocked. Currently, there's no
good way to detect if a server is stuck and needs to be killed manually.
This commit adds an option for enforcing a timeout (in seconds) for
requests where if the timeout elapses without the server responding to
the request, the connection will be automatically aborted.
Please note that these timeouts are not 100% precise. For example, the
request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond
the requested timeout due to internal implementation, in order to
mitigate overhead.
[SzM: Bump the API version number]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If filesystem doesn't support FUSE_LINK (i.e. returns -ENOSYS), then
remember this and next time return immediately, without incurring the
overhead of a round trip to the server.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
link() is documented to return EPERM when a filesystem doesn't support
the operation, return that instead.
Link: https://github.com/libfuse/libfuse/issues/925
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Function fuse_uring_create() is used only from dev_uring.c and does not
need to be exposed in the header file. Furthermore, it has the wrong
signature.
While there, also remove the 'struct fuse_ring' forward declaration.
Signed-off-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
task-A (application) might be in request_wait_answer and
try to remove the request when it has FR_PENDING set.
task-B (a fuse-server io-uring task) might handle this
request with FUSE_IO_URING_CMD_COMMIT_AND_FETCH, when
fetching the next request and accessed the req from
the pending list in fuse_uring_ent_assign_req().
That code path was not protected by fiq->lock and so
might race with task-A.
For scaling reasons we better don't use fiq->lock, but
add a handler to remove canceled requests from the queue.
This also removes usage of fiq->lock from
fuse_uring_add_req_to_ring_ent() altogether, as it was
there just to protect against this race and incomplete.
Also added is a comment why FR_PENDING is not cleared.
Fixes: c090c8abae ("fuse: Add io-uring sqe commit and fetch support")
Cc: <stable@vger.kernel.org> # v6.14
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Closes: https://lore.kernel.org/all/CAJnrk1ZgHNb78dz-yfNTpxmW7wtT88A=m-zF0ZoLXKLUHRjNTw@mail.gmail.com/
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Correct detect condition is applied to the entire 5221 family of PHYs.
Fixes: 3abbd0699b ("net: phy: broadcom: add support for BCM5221 phy")
Signed-off-by: Jim Liu <jim.t90615@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prevent runtime resume/suspend while MS IOCTLs are in progress.
Failed suspend will call ivpu_ms_cleanup() that would try to acquire
file_priv->ms_lock, which is already held by the IOCTLs.
Fixes: cdfad4db77 ("accel/ivpu: Add NPU profiling support")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114306.3740022-3-maciej.falkowski@linux.intel.com
Fix deadlock in ivpu_ms_cleanup() by preventing runtime resume after
file_priv->ms_lock is acquired.
During a failure in runtime resume, a cold boot is executed, which
calls ivpu_ms_cleanup_all(). This function calls ivpu_ms_cleanup()
that acquires file_priv->ms_lock and causes the deadlock.
Fixes: cdfad4db77 ("accel/ivpu: Add NPU profiling support")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114306.3740022-2-maciej.falkowski@linux.intel.com
Replace multi-line SPDX license headers with single-line
equivalents (// SPDX-License-Identifier: MIT or /* ... */ for
headers), as preferred by current kernel coding style.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mikołaj Wasiak <mikolaj.wasiak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250327232629.2939-1-andi.shyti@linux.intel.com
Warn if device is suspended only when runtime PM is enabled.
Runtime PM is disabled during reset/recovery and it is not an error
to use ivpu_ipc_send_receive_internal() in such cases.
Fixes: 5eaa497411 ("accel/ivpu: Prevent recovery invocation during probe and resume")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114219.3739951-1-maciej.falkowski@linux.intel.com
Prior to commit 496121c021 ("ACPI: processor: idle: Allow probing on
platforms with one ACPI C-state"), the acpi_idle driver wouldn't load on
systems without a valid C-State at least as deep as C2.
The behavior was desirable for guests on hypervisors such as VMWare
ESXi, which by default don't have the _CST ACPI method, and set the C2
and C3 latencies to 101 and 1001 microseconds respectively via the FADT,
to signify they're unsupported.
Since the above change though, these virtualized deployments end up
loading acpi_idle, and thus entering the default C1 C-State set by
acpi_processor_get_power_info_default(); this is undesirable for a
system that's communicating to the OS it doesn't want C-States (missing
_CST, and invalid C2/C3 in FADT).
Make acpi_processor_get_power_info_fadt() return -ENODEV in that case,
so that acpi_processor_get_cstate_info() exits early and doesn't set
pr->flags.power = 1.
Fixes: 496121c021 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250328143040.9348-1-ggherdovich@suse.cz
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
IPC message cannot be sent from the irq thread directly as the message will
not receive the reply (interrupts are disabled) and it will time out - the
reply is going to be received right after the we leave the irq thread.
This is a different case compared to the delayed IPC messages due to DSP
busy state.
Add support for sending the mic privacy change notification to the firmware
from a work instead of the process callback.
The work needs to be canceled if there is a chance that it might be running
on module remove or before system/runtime suspend.
Fixes: 4a43c3241e ("ASoC: SOF: Intel: ptl: Add support for mic privacy")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250331070623.5985-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable FBC compressor clock gating before enabling FBC and
clear it after disabling FBC.
v2: update the DG2 registers for this wa
v3: use local variable and single line reg definition (Jani)
Bspec: 74212, 72197, 69741, 65555
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250330172616.718188-1-vinod.govindapillai@intel.com
MediaTek MT8192 SoC has an ARM Mali-G57 MC5 GPU (Valhall-JM). Now that
Panfrost supports AARCH64_4K page table format, let's enable it on this
SoC.
Running glmark2-es2-drm [0] benchmark, reported the same performance
score on both modes Mali LPAE (LEGACY) vs. AARCH64_4K, before and after
this commit. Tested on a Mediatek (MT8395) Genio 1200 EVK board.
[0] https://github.com/glmark2/glmark2
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-7-ariel.dalessandro@collabora.com
MediaTek MT8188 SoC has an ARM Mali-G57 MC3 GPU (Valhall-JM), which
constantly faults with the current panfrost support.
For instance, running `glmark2-es2-drm` benchmark test:
```
[ 79.617461] panfrost 13000000.gpu: js fault, js=1, status=JOB_BUS_FAULT, head=0xaadc380, tail=0xaadc380
[ 80.119811] panfrost 13000000.gpu: gpu sched timeout, js=0, config=0x7300, status=0x58, head=0xaaca180, tail=0xaaca180, sched_job=000000002fd03ccc
[ 80.129083] panfrost 13000000.gpu: Unhandled Page fault in AS0 at VA 0x0000000000000000
[ 80.129083] Reason: TODO
[ 80.129083] raw fault status: 0x1C2
[ 80.129083] decoded fault status: SLAVE FAULT
[ 80.129083] exception type 0xC2: TRANSLATION_FAULT_2
[ 80.129083] access type 0x1: EXECUTE
[ 80.129083] source id 0x0
```
Note that current panfrost mode (Mali LPAE - LEGACY) only allows to
specify write-cache or implementation-defined as the caching policy,
probably not matching the right configuration. As depicted in the source
code:
drivers/iommu/io-pgtable-arm.c:
```
* MEMATTR: Mali has no actual notion of a non-cacheable type, so the
* best we can do is mimic the out-of-tree driver and hope that the
* "implementation-defined caching policy" is good enough...
```
Now that Panfrost supports AARCH64_4K page table format, let's enable it
on Mediatek MT8188 and configure the cache/shareability policies
properly.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-6-ariel.dalessandro@collabora.com
Currently, Panfrost only supports MMU configuration in "LEGACY" (as
Bifrost calls it) mode, a (modified) version of LPAE "Large Physical
Address Extension", which in Linux we've called "mali_lpae".
This commit adds support for conditionally enabling AARCH64_4K page
table format. To achieve that, a "GPU optional quirks" field was added
to `struct panfrost_features` with the related flag.
Note that, in order to enable AARCH64_4K mode, the GPU variant must have
the HW_FEATURE_AARCH64_MMU feature flag present.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-5-ariel.dalessandro@collabora.com
We have now seen this:
<4> [2120.434153] i915 0000:00:02.0: [drm] drm_WARN_ON(psr->paused)
<4> [2120.434196] WARNING: CPU: 3 PID: 4430 at drivers/gpu/drm/i915/display/intel_psr.c:2227 intel_psr_pause+0x16e/0x180 [i915]
Comment for drm_WARN_ON(display->drm, psr->paused) in intel_psr_pause says:
"If we ever hit this, we will need to add refcount to pause/resume"
This patch is implementing PSR pause/resume refcount.
v3: Incorporate changes missing from v2
v2: Add drm_warn for detecting possible unbalanced pause/resume
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250328080623.1183669-1-jouni.hogander@intel.com
Set this feature flag on all Mali Bifrost platforms as the MMU supports
AARCH64 4K page table format.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-4-ariel.dalessandro@collabora.com
As done in panthor, define and use these GPU_MMU_FEATURES_* macros,
which makes code easier to read and reuse.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-3-ariel.dalessandro@collabora.com
Panfrost does not support uncached mappings, so flag them properly. Also
flag the pages that are mapped as response to a page fault as cached.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-2-ariel.dalessandro@collabora.com
The perf events code fails to account for total_time_enabled of
inactive events.
Here is a failure case for accounting total_time_enabled for
CPU PMU events:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 2s
...
armv8_pmuv3_0/event=0x08/: 1138698008 2289429840 2174835740
armv8_pmuv3_1/event=0x08/: 1826791390 1950025700 847648440
` ` `
` ` > total_time_running with child
` > total_time_enabled with child
> count with child
Performance counter stats for 'stress-ng --pthread=2 -t 2s':
1,138,698,008 armv8_pmuv3_0/event=0x08/ (94.99%)
1,826,791,390 armv8_pmuv3_1/event=0x08/ (43.47%)
The two events above are opened on two different CPU PMUs, for example,
each event is opened for a cluster in an Arm big.LITTLE system, they
will never run on the same CPU. In theory, the total enabled time should
be same for both events, as two events are opened and closed together.
As the result show, the two events' total enabled time including
child event is different (2289429840 vs 1950025700).
This is because child events are not accounted properly
if a event is INACTIVE state when the task exits:
perf_event_exit_event()
`> perf_remove_from_context()
`> __perf_remove_from_context()
`> perf_child_detach() -> Accumulate child_total_time_enabled
`> list_del_event() -> Update child event's time
The problem is the time accumulation happens prior to child event's
time updating. Thus, it misses to account the last period's time when
the event exits.
The perf core layer follows the rule that timekeeping is tied to state
change. To address the issue, make __perf_remove_from_context()
handle the task exit case by passing 'DETACH_EXIT' to it and
invoke perf_event_state() for state alongside with accounting the time.
Then, perf_child_detach() populates the time into the parent's time metrics.
After this patch, the bug is fixed:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 10s
...
armv8_pmuv3_0/event=0x08/: 15396770398 32157963940 21898169000
armv8_pmuv3_1/event=0x08/: 22428964974 32157963940 10259794940
Performance counter stats for 'stress-ng --pthread=2 -t 10s':
15,396,770,398 armv8_pmuv3_0/event=0x08/ (68.10%)
22,428,964,974 armv8_pmuv3_1/event=0x08/ (31.90%)
[ mingo: Clarified the changelog. ]
Fixes: ef54c1a476 ("perf: Rework perf_event_exit_event()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250326082003.1630986-1-yeoreum.yun@arm.com
The fixed commit sets up dev.dma_range_map but missed that this is
supposed to be an array of struct bus_dma_region with a sentinel element
with the size field set to 0 at the end. This would lead to overruns in
e.g. dma_range_map_min(). It could also result in wrong translations
instead of DMA_MAPPING_ERROR in translate_phys_to_dma() if the paddr
were to not fit in the aperture. Fix this by using the
dma_direct_set_offset() helper which creates a sentinel for us.
Fixes: d236843a69 ("s390/pci: store DMA offset in bus_dma_region")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20250312-fix_dma_map_alloc-v2-1-530108d9de21@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In case of an unexpected low address protection fault in user mode dump
fault info to make debugging a bit easier. At least the teid is valid,
while dumping the page table is racy, since no lock is held.
But it might still give some hints.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add support for HOTPLUG_SMT. With this the s390 specific "nosmt" kernel
command line parameter handling is replaced with common code handling.
This means that just specifying "nosmt" still enables smt from an
architectural point of view, however only the primary (base) cpu can be set
online. Enabling smt during runtime via /sys/devices/system/cpu/smt/control
allows to set secondary cpus online. This way "nosmt" works like on other
architectures where enabling and disabling smt during runtime is possible.
If "nosmt=force" is specified smt is also still enabled from an
architectural point of view, but there is no way to set secondary cpus
online during runtime, also like on other architectures.
In order to disable smt from architectural point of view, which was
previously achieved with the s390 specific "nosmt" command line option,
"smt=1" can be used.
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The kernel build may fail if the linker does not support -no-pie option,
as it always included in LDFLAGS_vmlinux.
Error log:
s390-linux-ld: unable to disambiguate: -no-pie (did you mean --no-pie ?)
Although the GNU linker defaults to -no-pie, the ability to explicitly
specify this option was introduced in binutils 2.36.
Hence, fix it by adding -no-pie to LDFLAGS_vmlinux only when it is
available.
Cc: stable@vger.kernel.org
Fixes: 00cda11d3b ("s390: Compile kernel with -fPIC and link with -no-pie")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503220342.T3fElO9L-lkp@intel.com/
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use bitop functions to implement cpu flag helper functions. This way
it is guaranteed that bits cannot get lost if modified in different
contexts on a cpu.
E.g. if process context is interrupted in the middle of a
read-modify-write sequence while modifying cpu flags, and within
interrupt context cpu flags are also modified, bits can get lost.
There is currently no code which is doing this, however upcoming code
could potentially run into this problem.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove ASM_OFFSETS_C which is used as guard in thread_info.h to decide if
asm-offsets can be included or not.
There is no reason to include asm-offsets.h in thread_info.h anymore.
Remove the define and the not needed include. Explicitly include
asm-offsets.h in all header files which require it, and where it used
to be included implicitly via thread_info.h.
This reduces header dependencies.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reduce header dependencies by including ftrace_regs.h and ptrace.h,
which does not include other header files, instead of ftrace.h which
pulls in various other header files.
This is sufficient for __FTRACE_REGS_PT_REGS and __FTRACE_REGS_SIZE.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In order to generate asm offsets into kvm_s390_sie_block linux/kvm_host.h
is included in asm-offsets.c. This causes quite often header dependency
problems, since linux/kvm_host.h pulls in a lot of other header files.
Solve this problem and split out the hardware structure declarations into a
separate header file. Include only the new header file into asm-offsets.c
instead of linux/kvm_host.h. This is sufficient to generate the two asm
offsets required for kvm (__SIE_PROG0C and __SIE_PROG20).
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For non-VFs, zpci_bus_is_isolated_vf() should return false because they
aren't VFs. While zpci_iov_find_parent_pf() specifically checks if
a function is a VF, it then simply returns that there is no parent. The
simplistic check for a parent then leads to these functions being
confused with isolated VFs and isolating them on their own domain even
if sibling PFs should share the domain.
Fix this by explicitly checking if a function is not a VF. Note also
that at this point the case where RIDs are ignored is already handled
and in this case all PCI functions get isolated by being detected in
zpci_bus_is_multifunction_root().
Cc: stable@vger.kernel.org
Fixes: 2844ddbd54 ("s390/pci: Fix handling of isolated VFs")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The machine_flags member in struct lowcore is not used anymore.
Remove it.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When lowcore relocation is enabled, the machine check handler doesn't
use the lowcore address when setting _CIF_MCCK_GUEST. Fix this by
adding the missing base register.
Fixes: 0001b7bbc5 ("s390/entry: Make mchk_int_handler() ready for lowcore relocation")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The I3C master driver may receive an IBI from a target device that has not
been probed yet. In such cases, the master calls `i3c_master_queue_ibi()`
to queue an IBI work task, leading to "Unable to handle kernel read from
unreadable memory" and resulting in a kernel panic.
Typical IBI handling flow:
1. The I3C master scans target devices and probes their respective drivers.
2. The target device driver calls `i3c_device_request_ibi()` to enable IBI
and assigns `dev->ibi = ibi`.
3. The I3C master receives an IBI from the target device and calls
`i3c_master_queue_ibi()` to queue the target device driver’s IBI
handler task.
However, since target device events are asynchronous to the I3C probe
sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`,
leading to a kernel panic.
Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing
an uninitialized `dev->ibi`, ensuring stability.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/Z9gjGYudiYyl3bSe@lizhi-Precision-Tower-5810/
Signed-off-by: Manjunatha Venkatesh <manjunatha.venkatesh@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250326123047.2797946-1-manjunatha.venkatesh@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
OF APIs are usually NULL-aware and returns an error in case when
device node is not present or supported. We already have a check
for the returned value, no need to check for the parameter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250321193044.457649-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250331070758.3986134-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Because of different crate names ("pin-init" and "pin_init") passed to
"append_crate" and "append_crate_with_generated", the script fails with
"KeyError: 'pin-init'".
To overcome the issue, pass the same name to both functions.
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Link: https://lore.kernel.org/r/AM9PR03MB7074692E5D24C288D2BBC801C8AD2@AM9PR03MB7074.eurprd03.prod.outlook.com
Fixes: 4e82c87058 ("Merge tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux")
[ Made author match the Signed-off-by one. Added newline. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This patch adds the HP OMEN 16 Laptop xd000xx to enable mute led.
it uses ALC245_FIXUP_HP_MUTE_LED_COEFBIT with a slight modification
setting mute_led_coef.off to 0(it was set to 4 i guess
in that function) which i referred to your previous patch disscusion
https://bugzilla.kernel.org/show_bug.cgi?id=214735 .
i am not sure whether i can modify the current working function so i
added another version calling
ALC245_FIXUP_HP_MUTE_LED_V1_COEFBIT. and both works for me.
Tested on 6.13.4-arch1-1 to 6.14.0-arch1-1
Signed-off-by: Sharan Kumar M <sharweshraajan@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250329154105.7618-2-sharweshraajan@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250324080303.408084-1-nichen@iscas.ac.cn
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250324075910.407999-1-nichen@iscas.ac.cn
Calculate difference of SAR configs between RF path A and RF path B.
And then, based on the calculated result, set the TX power reference
CR (control register). Finally, declare to support SAR by antenna in
8852b/8852bt chip info.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250326020643.14487-13-pkshih@realtek.com
Set SAR configs to the corresponding CRs (control registers) according to
RF path. Then, declare to support SAR by antenna in chip info.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250326020643.14487-12-pkshih@realtek.com
Set SAR configs to the corresponding CRs (control registers) according to
RF path. Then, declare to support SAR by antenna in chip info.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250326020643.14487-11-pkshih@realtek.com
Some SAR sources, e.g. ACPI, may allow different SAR configs by antenna.
Previously, the minimum config between antennas was taken. Because there
are differences between HW design, different chips might have different
solutions to achieve this. So, it cannot be done through a single common
handling. Now, add the relevant skeleton for this purpose ahead.
First, add a flag into chip info to describe whether it has implemented
this function or not. Second, support to query SAR config for a given RF
path. With it, each chip can implement its own handling. Then, if a chip
declares to support this function, when it queries SAR config without a
given RF path, it gets a maximum config between antennas.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250326020643.14487-10-pkshih@realtek.com
Support to load GEO (geography) SAR tables with ACPI RWGS method. When
SAR values could be different by regulatory, GEO SAR can be used. The
format of GEO SAR is like the following, where regulatory number, band
number, and delta number are determined by header of either static SAR
or dynamic SAR. (It also means that no GEO SAR will be considered when
neither static SAR nor dynamic SAR is configured.)
delta number
/ \
+ +-----+-----------------+
/ | | max | delta... | \
/ | +-----+-----------------+ band
/ | | max | delta... | number
/ | +-----+-----------------+
/ | |... | /
+ +-----+-----------------+
| | max | delta... | \
regulatory | +-----+-----------------+ band
number | | max | delta... | number
| +-----+-----------------+
| |... | /
+ +-----+-----------------+
\ | |... |
\ | |... |
\ | |... |
\ | | |
\ | | |
+ +-----+-----------------+
Each entry of GEO SAR contains delta field(s), which are offset(s) used
to tweak the loaded static/dynamic SAR table(s) by antenna, and one max
field, which describes the maximum of the final SAR values after tweaked.
Different entries should be configured based on both regulatory and band.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250326020643.14487-9-pkshih@realtek.com
Support to load dynamic SAR tables with ACPI RWRD method. The content
format of a single dynamic SAR table is basically the same as static
SAR table. However, it's able to carry multiple dynamic SAR tables at
one time. And, its header contains one more field to describe how many
dynamic SAR tables are filled in the content. Either static SAR table
or dynamic SAR tables can be supported, but not both simultaneously.
Besides, also support to load indicator of dynamic SAR with ACPI RWSI
method. The indicator will describe a target dynamic SAR table, which
should be followed currently, by antenna. It can be changed at runtime
according to platform mode. For example, tablet mode can use different
SAR from normal mode. So, track indicator configuration if dynamic SAR
is configured.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250326020643.14487-8-pkshih@realtek.com
Support to load static SAR table with ACPI WRDS method. The format of
a static SAR table is like the following, where according to header,
antenna number could be either 2 or 4 and subband number could either
contain 6 GHz or not. And then, an entry of it describes a TX power
limitation with a given unit, which is also based on header, for the
antenna under the subband. Though things can be determined by header,
still not all combinations are allowed in content. For the recognizing
flow, there is a list of allowed combinations.
+--------------------------------+
| header |
+--------------------------------+
+---+---+---+---+---+------------+ +
/ | | | | | | ... | | \
+---+---+---+---+---+------------+ |
antenna | | | | | | ... | |
number +---+---+---+---+---+------------+ | content
|...| | | | | ... | |
+---+---+---+---+---+------------+ |
\ |...| | | | | ... | | /
+---+---+---+---+---+------------+ +
\ /
subband number
Following the format above, try to load a static SAR table and normalize
its content into SW structure. If any recognized is loaded, SW SAR flow
is then set up with source from ACPI.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250326020643.14487-7-pkshih@realtek.com
The following implementations will evaluate different ACPI methods, but
the pre-process flow of them are the same. So, introduce a function for
these pre-process things. Besides, also change ACPI RTAG method to call
this function.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250326020643.14487-6-pkshih@realtek.com
