The compiler correctly warns that hv_nxc may be used uninitialised
as that will occur when NX-GZIP is unavailable.
Fix it by rearranging the code and delay setting caps_feat until
the final query succeeds.
Fixes: b4ba22114c ("crypto/nx: Get NX capabilities for GZIP coprocessor type")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use desc instead of a stack buffer in the final function. This
fixes a compiler warning about buf being uninitialised.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Any driver that needs these library functions should already be selecting
the corresponding Kconfig symbols, so there is no real point in making
these visible.
The original patch that made these user selectable described problems
with drivers failing to select the code they use, but for consistency
it's better to always use 'select' on a symbol than to mix it with
'depends on'.
Fixes: e56e189855 ("lib/crypto: add prompts back to crypto libraries")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The field parerr_wat_wcp_mask in the structure adf_dev_err_mask enables
the detection and reporting of parity errors for the wireless cipher and
wireless authentication accelerators.
Set the parerr_wat_wcp_mask field, which was inadvertently omitted
during the initial enablement of the qat_420xx driver, to ensure that
parity errors are enabled for those accelerators.
In addition, fix the string used to report such errors that was
inadvertently set to "ath_cph" (authentication and cipher).
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memory requested to hold the image data for authentication will
never exceed `ICP_QAT_CSS_RSA4K_MAX_IMAGE_LEN`. Therefore, we can
simplify the allocation by always requesting the maximum size needed for
any image.
Also introduce the following checks:
* Ensure the allocated memory is 8-byte aligned to meet the
requirements of the authentication firmware.
* Prevent overflow when constructing the authentication descriptor.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The FW image size check is already performed in the function
qat_uclo_check_image() before calling `qat_uclo_map_auth_fw()`.
Therefore, the additional check in `qat_uclo_map_auth_fw()` is redundant
and can be safely removed.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the members `css_key` and `css_signature` which are not used for
doing the firmware authentication.
The signed image pointer can be calculated using the pointer to the CSS
header and the length of the CSS header, making these members redundant.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Curiously, the Crypto API scatterwalk incremented pages by hand
rather than using nth_page. Possibly because scatterwalk predates
nth_page (the following commit is from the history tree):
commit 3957f2b34960d85b63e814262a8be7d5ad91444d
Author: James Morris <jmorris@intercode.com.au>
Date: Sun Feb 2 07:35:32 2003 -0800
[CRYPTO]: in/out scatterlist support for ciphers.
Fix this by using nth_page.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building for 32-bit targets, for which ssize_t is 'int' instead of
'long', there is a warning due to an incorrect format specifier:
In file included from include/linux/printk.h:610,
from include/linux/kernel.h:31,
from include/linux/clk.h:13,
from drivers/crypto/tegra/tegra-se-hash.c:7:
drivers/crypto/tegra/tegra-se-hash.c: In function 'tegra_sha_prep_cmd':
drivers/crypto/tegra/tegra-se-hash.c:343:26: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'ssize_t' {aka 'int'} [-Werror=format=]
343 | dev_dbg(se->dev, "msg len %llu msg left %llu sz %lu cfg %#x",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
drivers/crypto/tegra/tegra-se-hash.c:343:59: note: format string is defined here
343 | dev_dbg(se->dev, "msg len %llu msg left %llu sz %lu cfg %#x",
| ~~^
| |
| long unsigned int
| %u
cc1: all warnings being treated as errors
Use '%zd', the proper specifier for ssize_t, to resolve the warning.
Fixes: ff4b7df0b5 ("crypto: tegra - Fix HASH intermediate result handling")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The test on PAGE_SIZE - offset in shash_ahash_digest can underflow,
leading to execution of the fast path even if the data cannot be
mapped into a single page.
Fix this by splitting the test into four cases:
1) nbytes > sg->length: More than one SG entry, slow path.
2) !IS_ENABLED(CONFIG_HIGHMEM): fast path.
3) nbytes > (unsigned int)PAGE_SIZE - offset: Two highmem pages, slow path.
4) Highmem fast path.
Fixes: 5f7082ed4f ("crypto: hash - Export shash through hash")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function crypto_shash_update_sg iterates through an SG by
hand. It fails to handle corner cases such as SG entries longer
than a page. Fix this by using the SG iterator.
Fixes: 348f5669d1 ("crypto/krb5: Implement the Kerberos5 rfc3961 get_mic and verify_mic")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add kmap_local support to the scatterlist iterator. Use it for
all the helper functions in lib/scatterlist.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the representation of fuses in the accelerator device
structure from a single value to an array.
This allows the structure to accommodate additional fuses that
are required for future generations of QAT hardware.
This does not introduce any functional changes.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the address returned by scatterwalk_map() is always being
stored into the same struct scatter_walk that is passed in, make
scatterwalk_map() do so itself and return void.
Similarly, now that scatterwalk_unmap() is always being passed the
address field within a struct scatter_walk, make scatterwalk_unmap()
take a pointer to struct scatter_walk instead of the address directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce the ADF_CSR_WR_LO_HI macro to simplify writing a 64-bit values
to hardware registers.
This macro works by splitting the 64-bit value into two 32-bit segments,
which are then written separately to the specified lower and upper
register offsets.
Update the adf_gen4_set_ssm_wdtimer() function to utilize this newly
introduced macro.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When determining the actual best period by looping through all
possible PWM configs, the resolution currently used is based on
bit shift value which is off-by-one above the possible maximum
PWM value allowed.
So subtract one from the resolution before determining the best
period so that the maximum duty cycle requested by the PWM user
won't result in a value above the maximum allowed by the selected
resolution.
Cc: stable@vger.kernel.org # 6.4
Fixes: b00d2ed376 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-3-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Ideally, the requested duty cycle should never translate to a PWM
value higher than the selected resolution (PWM size), but currently the
best matched period is never reported back to the PWM consumer, so the
consumer will still be using the requested period which is higher than
the best matched one. This will result in PWM consumer requesting
duty cycle values higher than the allowed PWM value.
For example, a consumer might request a period of 5ms while the best
(closest) period the PWM hardware will do is 4.26ms. For this best
matched resolution, if the selected resolution is 8-bit wide, when
the consumer asks for a duty cycle of 5ms, the PWM value will be 300,
which is outside of what the resolution allows. This will happen with
all possible resolutions when selected.
Since for these Hi-Res PWMs, the current implementation is capping the PWM
value at a 15-bit resolution, even when lower resolutions are selected,
the value will be wrapped around by the HW internal logic to the selected
resolution.
Fix the issue by capping the PWM value to the maximum value allowed by
the selected resolution.
Cc: stable@vger.kernel.org # 6.4
Fixes: b00d2ed376 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-2-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Ideally, the requested duty cycle should never translate to a PWM
value higher than the selected resolution (PWM size), but currently the
best matched period is never reported back to the PWM consumer, so the
consumer will still be using the requested period which is higher than
the best matched one. This will result in PWM consumer requesting
duty cycle values higher than the allowed PWM value.
For example, a consumer might request a period of 5ms while the best
(closest) period the PWM hardware will do is 4.26ms. For this best
matched resolution, if the selected resolution is 9-bit wide, when
the consumer asks for a duty cycle of 5ms, the PWM value will be 600,
which is outside of what the resolution allows. Similar will happen
if the 6-bit resolution is selected.
Since for these normal PWMs (non Hi-Res), the current implementation is
capping the PWM value at a 9-bit resolution, even when the 6-bit
resolution is selected, the value will be wrapped around to 6-bit value
by the HW internal logic.
Fix the issue by capping the PWM value to the maximum value allowed by
the selected resolution.
Fixes: 7a3350495d ("leds: rgb: leds-qcom-lpg: Add support for 6-bit PWM resolution")
Suggested-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-1-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
In case the fib match is used from the input hook we can avoid the fib
lookup if early demux assigned a socket for us: check that the input
interface matches sk-cached one.
Rework the existing 'lo bypass' logic to first check sk, then
for loopback interface type to elide the fib lookup.
This speeds up fib matching a little, before:
93.08 GBit/s (no rules at all)
75.1 GBit/s ("fib saddr . iif oif missing drop" in prerouting)
75.62 GBit/s ("fib saddr . iif oif missing drop" in input)
After:
92.48 GBit/s (no rules at all)
75.62 GBit/s (fib rule in prerouting)
90.37 GBit/s (fib rule in input).
Numbers for the 'no rules' and 'prerouting' are expected to
closely match in-between runs, the 3rd/input test case exercises the
the 'avoid lookup if cached ifindex in sk matches' case.
Test used iperf3 via veth interface, lo can't be used due to existing
loopback test.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A invalid prototype made it into a previous patch, causing an clang warning:
drivers/platform/cznic/turris-signing-key.c:25:55: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
and a slightly different warning with gcc-11 and earlier but not gcc-12 and up:
drivers/platform/cznic/turris-signing-key.c: In function 'turris_signing_key_instantiate':
drivers/platform/cznic/turris-signing-key.c:25:43: error: parameter name omitted
Add the parameters to get a clean build with all compilers.
Fixes: 0b28b7080e ("platform: cznic: Add keyctl helpers for Turris platform")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503210450.AoOpbJXC-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
fsl_mc_allocator_driver_exit() was added explicitly by
commit 1e8ac83b6c ("bus: fsl-mc: add fsl_mc_allocator cleanup function")
but was never used.
Remove it.
fsl_mc_portal_reset() was added in 2015 by
commit 197f4d6a4a ("staging: fsl-mc: fsl-mc object allocator driver")
but was never used.
Remove it.
fsl_mc_portal_reset() was the only caller of dpmcp_reset().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20241115152055.279732-1-linux@treblig.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Convert intel_atomic_commit() and intel_atomic_commit_tail() to use
display runtime PM interfaces. Also convert the wakeref member type to
struct ref_tracker *, which is the same as intel_wakeref_t, but without
the typedef.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/2682fa92089ab87429eef4d45f931839f0d32077.1742483007.git.jani.nikula@intel.com
Add display specific wrappers around the i915 and xe dedicated runtime
PM interfaces. There are no conversions here, just the wrappers.
Implement with_intel_display_rpm() without needing to provide a local
variable, which neatly narrows the scope and hides the type of the
wakeref cookie.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/086b312367fa0fbd8de92e9764117aa7ff4a8cc5.1742483007.git.jani.nikula@intel.com
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
MSI remapping bypass (directly configuring MSI entries for devices on the
VMD bus) won't work under Xen, as Xen is not aware of devices in such bus,
and hence cannot configure the entries using the pIRQ interface in the PV
case, and in the PVH case traps won't be setup for MSI entries for such
devices.
Until Xen is aware of devices in the VMD bus prevent the
VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as
any kind of Xen guest.
The MSI remapping bypass is an optional feature of VMD bridges, and hence
when running under Xen it will be masked and devices will be forced to
redirect its interrupts from the VMD bridge. That mode of operation must
always be supported by VMD bridges and works when Xen is not aware of
devices behind the VMD bridge.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-3-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_display_irq.[ch] to struct
intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/b6e281875278ad84772938f81129fde6065b2745.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert the external interfaces of intel_display_irq.[ch] to
struct intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/83b552154761d2790d8c774707e8d7612037bdf5.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_hotplug_irq.[ch] to struct
intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/8ddf27ea31b543f88c5f124f029c2eaa06a9aae7.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_hotplug.[ch] to struct
intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/cf382dbfacf1445b26fbe1e7c011e7a3ea6e1594.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_connector.c to struct
intel_display. i915_inject_probe_failure() remains the only call that
requires i915 pointer.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/398e3210459a65f74e78f2d34584cda6eea6a99b.1742481923.git.jani.nikula@intel.com
Due to pending percpu improvements in -next, GCC9 and GCC10 are
crashing during the build with:
lib/zstd/compress/huf_compress.c:1033:1: internal compiler error: Segmentation fault
1033 | {
| ^
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-9/README.Bugs> for instructions.
The DYNAMIC_BMI2 feature is a known-challenging feature of
the ZSTD library, with an existing GCC quirk turning it off
for GCC versions below 4.8.
Increase the DYNAMIC_BMI2 version cutoff to GCC 11.0 - GCC 10.5
is the last version known to crash.
Reported-by: Michael Kelley <mhklinux@outlook.com>
Debugged-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: https://lore.kernel.org/r/SN6PR02MB415723FBCD79365E8D72CA5FD4D82@SN6PR02MB4157.namprd02.prod.outlook.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Clang does not tolerate the use of non-TLS symbols for the per-CPU stack
protector very well, and to work around this limitation, the symbol
passed via the -mstack-protector-guard-symbol= option is never defined
in C code, but only in the linker script, and it is exported from an
assembly file. This is necessary because Clang will fail to generate the
correct %GS based references in a compilation unit that includes a
non-TLS definition of the guard symbol being used to store the stack
cookie.
This problem is only triggered by symbol definitions, not by
declarations, but nonetheless, the declaration in <asm/asm-prototypes.h>
is conditional on __GENKSYMS__ being #define'd, so that only genksyms
will observe it, but for ordinary compilation, it will be invisible.
This is causing problems with the genksyms alternative gendwarfksyms,
which does not #define __GENKSYMS__, does not observe the symbol
declaration, and therefore lacks the information it needs to version it.
Adding the #define creates problems in other places, so that is not a
straight-forward solution. So take the easy way out, and drop the
conditional on __GENKSYMS__, as this is not really needed to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250320213238.4451-2-ardb@kernel.org
The current hypercall interface for doing PCI device operations always uses
a segment field that has a 16 bit width. However on Linux there are buses
like VMD that hook up devices into the PCI hierarchy at segment >= 0x10000,
after the maximum possible segment enumerated in ACPI.
Attempting to register or manage those devices with Xen would result in
errors at best, or overlaps with existing devices living on the truncated
equivalent segment values. Note also that the VMD segment numbers are
arbitrarily assigned by the OS, and hence there would need to be some
negotiation between Xen and the OS to agree on how to enumerate VMD
segments and devices behind them.
Skip notifying Xen about those devices. Given how VMD bridges can
multiplex interrupts on behalf of devices behind them there's no need for
Xen to be aware of such devices for them to be usable by Linux.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250219092059.90850-2-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
frontend_bound metrics was miscalculated due to different scaling in
a couple of metrics it depends on. Change the scaling to match with
AmpereOne.
Fixes: 16438b652b ("perf vendor events arm64 AmpereOneX: Add core PMU events and metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250313201559.11332-3-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Atomic instructions are both memory-reading and memory-writing
instructions and so should be counted by both LD_RETIRED and ST_RETIRED
performance monitoring events. However LD_RETIRED does not count atomic
instructions.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250313201559.11332-2-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Leak sanitizer was reporting a memory leak in the "perf record and
replay" test. Add evlist__delete to trace__exit, also ensure
trace__exit is called after trace__record.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-15-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add missing btf__free in trace__exit.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-14-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Namhyung fixed the syscall table being reallocated and moving by
reloading the system call pointer after a move:
https://lore.kernel.org/lkml/Z9YHCzINiu4uBQ8B@google.com/
This could be brittle so this patch changes the syscall table to be an
array of pointers of "struct syscall" that don't move. Remove
unnecessary copies and searches with this change.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-13-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
