rolling_buffer_load_from_ra() looms large in the perf report because it
loops around doing an atomic clear for each of the three mark bits per
folio. However, this is both inefficient (it would be better to build a
mask and atomically AND them out) and unnecessary as they shouldn't be set.
Fix this by removing the loop.
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250314164201.1993231-4-dhowells@redhat.com
Acked-by: "Paulo Alcantara (Red Hat)" <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
A netfs read request can run in one of two modes: for synchronous reads
writes, the app thread does the collection of results and for asynchronous
reads, this is offloaded to a worker thread. This is controlled by the
NETFS_RREQ_OFFLOAD_COLLECTION flag.
Now, if a subrequest incurs an error, the NETFS_RREQ_PAUSE flag is set to
stop the issuing loop temporarily from issuing more subrequests until a
retry is successful or the request is abandoned.
When the issuing loop sees NETFS_RREQ_PAUSE, it jumps to
netfs_wait_for_pause() which will wait for the PAUSE flag to be cleared -
and whilst it is waiting, it will call out to the collector as more results
acrue... But this is the wrong thing to do if OFFLOAD_COLLECTION is set as
we can then end up with both the app thread and the work item collecting
results simultaneously.
This manifests itself occasionally when running the generic/323 xfstest
against multichannel cifs as an oops that's a bit random but frequently
involving io_submit() (the test does lots of simultaneous async DIO reads).
Fix this by only doing the collection in netfs_wait_for_pause() if the
NETFS_RREQ_OFFLOAD_COLLECTION is not set.
Fixes: e2d46f2ec3 ("netfs: Change the read result collector to only use one work item")
Reported-by: Steve French <stfrench@microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250314164201.1993231-2-dhowells@redhat.com
Acked-by: "Paulo Alcantara (Red Hat)" <pc@manguebit.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The ib_post_receive_mads() function handles posting receive work
requests (WRs) to MAD QPs and is called in two cases:
1) When a MAD port is opened.
2) When a receive WQE is consumed upon receiving a new MAD.
Whereas, if MADs arrive during the port open phase, a race condition
might cause an extra WR to be posted, exceeding the QP’s capacity.
This leads to failures such as:
infiniband mlx5_0: ib_post_recv failed: -12
infiniband mlx5_0: Couldn't post receive WRs
infiniband mlx5_0: Couldn't start port
infiniband mlx5_0: Couldn't open port 1
Fix this by checking the current receive count before posting a new WR.
If the QP’s receive queue is full, do not post additional WRs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/c4984ba3c3a98a5711a558bccefcad789587ecf1.1741875592.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some minor fixes and refinements of rtw89.
The only major change is rtw88:
* support RTL8814AE/RTL8814AU
-----BEGIN PGP SIGNATURE-----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=M1Go
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2025-03-13' of https://github.com/pkshih/rtw
Ping-Ke Shih says:
====================
rtw-next patches for v6.15
Some minor fixes and refinements of rtw89.
The only major change is rtw88:
* support RTL8814AE/RTL8814AU
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While this may sound like a pedantic clean up, it does in fact impact
code generation -- the patched add routine is slightly smaller.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250319004635.1820589-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
There is a race condition leading to a kernel crash from a null
dereference when attemping to access fc->lock in
fuse_uring_create_queue(). fc may be NULL in the case where another
thread is creating the uring in fuse_uring_create() and has set
fc->ring but has not yet set ring->fc when fuse_uring_create_queue()
reads ring->fc. There is another race condition as well where in
fuse_uring_register(), ring->nr_queues may still be 0 and not yet set
to the new value when we compare qid against it.
This fix sets fc->ring only after ring->fc and ring->nr_queues have been
set, which guarantees now that ring->fc is a proper pointer when any
queues are created and ring->nr_queues reflects the right number of
queues if ring is not NULL. We must use smp_store_release() and
smp_load_acquire() semantics to ensure the ordering will remain correct
where fc->ring is assigned only after ring->fc and ring->nr_queues have
been assigned.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20250318003028.3330599-1-joannelkoong@gmail.com
Fixes: 24fe962c86 ("fuse: {io-uring} Handle SQEs - register commands")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Loosen the permission check on forced umount to allow users holding
CAP_SYS_ADMIN privileges in namespaces that are privileged with respect
to the userns that originally mounted the filesystem.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/12f212d4ef983714d065a6bb372fbb378753bf4c.1742315194.git.trond.myklebust@hammerspace.com
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
For calibration, basic version does not contain any calibration addresses,
it depends on calibration tool to convey the addresses to the driver.
Since Alpha and Beta firmware, all the calibration addresses are saved
into the firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313093238.1184-1-shenghao-ding@ti.com
Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently we use a combination of TTM and GEM reference counting which is
cumbersome. TTM references are used for kernel internal BOs and operations
like validation. Simply switching the ttm_bo_(get|put) calls to their
GEM equivalents is insufficient as not all BOs are GEM BOs so we must set
the GEM vtable for all BOs even if they are not exposed to userspace.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131200321.193939-1-ian.forbes@broadcom.com
Dumb buffers were not being freed because the GEM reference that was
acquired in gb_surface_define was not dropped like it is in the 2D case.
Dropping this ref uncovered a few additional issues with freeing the
resources associated with dirty tracking in vmw_bo_free/release.
Additionally the TTM object associated with the surface were also leaking
which meant that when the ttm_object_file was closed at process exit the
destructor unreferenced an already destroyed surface.
The solution is to remove the destructor from the vmw_user_surface
associated with the dumb_buffer and immediately unreferencing the TTM
object which his removes it from the ttm_object_file.
This also allows the early return in vmw_user_surface_base_release for the
dumb buffer case to be removed as it should no longer occur.
The chain of references now has the GEM handle(s) owning the dumb buffer.
The GEM handles have a singular GEM reference to the vmw_bo which is
dropped when all handles are closed. When the GEM reference count hits
zero the vmw_bo is freed which then unreferences the surface via
vmw_resource_release in vmw_bo_release.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123204424.836896-1-ian.forbes@broadcom.com
2 paragraph warning and note take a bit more space, let's merge them together,
and guide to other maintainer and reviewers.
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Dongliang Mu <dzm91@hust.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20250305025101.27717-1-alexs@kernel.org
Translate .../security/snp-tdx-threat-model.rst into Chinese.
Update the translation through commit "cdae7e8a69c3"
("docs/MAINTAINERS: Update my email address")
Fixed pdfdocs warning by Alex Shi.
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Yuxian Mao <maoyuxian@cqsoftware.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20250304071401.117780-1-maoyuxian@cqsoftware.com.cn
This NULL check is unnecessary and can be removed. It confuses
Smatch static analysis tool because it makes Smatch think that
xfrm_lookup_with_ifid() can return a mix of NULL pointers and errors so
it creates a lot of false positives. Remove it.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The current verifier error message states that tail_calls are not
allowed in non-JITed programs with BPF-to-BPF calls. While this is
accurate, it is not the only scenario where this restriction applies.
Some architectures do not support this feature combination even when
programs are JITed. This update improves the error message to better
reflect these limitations.
Suggested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrea Terzolo <andreaterzolo3@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20250318083551.8192-1-andreaterzolo3@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If we attach fexit/fmod_ret to __noreturn functions, it will cause an
issue that the bpf trampoline image will be left over even if the bpf
link has been destroyed. Take attaching do_exit() with fexit for example.
The fexit works as follows,
bpf_trampoline
+ __bpf_tramp_enter
+ percpu_ref_get(&tr->pcref);
+ call do_exit()
+ __bpf_tramp_exit
+ percpu_ref_put(&tr->pcref);
Since do_exit() never returns, the refcnt of the trampoline image is
never decremented, preventing it from being freed. That can be verified
with as follows,
$ bpftool link show <<<< nothing output
$ grep "bpf_trampoline_[0-9]" /proc/kallsyms
ffffffffc04cb000 t bpf_trampoline_6442526459 [bpf] <<<< leftover
In this patch, all functions annotated with __noreturn are rejected, except
for the following cases:
- Functions that result in a system reboot, such as panic,
machine_real_restart and rust_begin_unwind
- Functions that are never executed by tasks, such as rest_init and
cpu_startup_entry
- Functions implemented in assembly, such as rewind_stack_and_make_dead and
xen_cpu_bringup_again, lack an associated BTF ID.
With this change, attaching fexit probes to functions like do_exit() will
be rejected.
$ ./fexit
libbpf: prog 'fexit': BPF program load failed: -EINVAL
libbpf: prog 'fexit': -- BEGIN PROG LOAD LOG --
Attaching fexit/fmod_ret to __noreturn functions is rejected.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20250318114447.75484-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current cgrp storage has a percpu counter, bpf_cgrp_storage_busy,
to detect potential deadlock at a spin_lock that the local storage
acquires during new storage creation.
There are false positives. It turns out to be too noisy in
production. For example, a bpf prog may be doing a
bpf_cgrp_storage_get on map_a. An IRQ comes in and triggers
another bpf_cgrp_storage_get on a different map_b. It will then
trigger the false positive deadlock check in the percpu counter.
On top of that, both are doing lookup only and no need to create
new storage, so practically it does not need to acquire
the spin_lock.
The bpf_task_storage_get already has a strategy to minimize this
false positive by only failing if the bpf_task_storage_get needs
to create a new storage and the percpu counter is busy. Creating
a new storage is the only time it must acquire the spin_lock.
This patch borrows the same idea. Unlike task storage that
has a separate variant for tracing (_recur) and non-tracing, this
patch stays with one bpf_cgrp_storage_get helper to keep it simple
for now in light of the upcoming res_spin_lock.
The variable could potentially use a better name noTbusy instead
of nobusy. This patch follows the same naming in
bpf_task_storage_get for now.
I have tested it by temporarily adding noinline to
the cgroup_storage_lookup(), traced it by fentry, and the fentry
program succeeded in calling bpf_cgrp_storage_get().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250318182759.3676094-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Starting with commit ec3e00b4ee ("drm/i915: stop registering if
drm_dev_register() fails"), we return from i915_driver_register()
immediately if drm_dev_register() fails, skipping remaining registration
steps, and continue only with remaining probe steps. However, the
_unregister() counterpart called at driver remove knows nothing about that
skip and executes reverts of all those steps. As a consequence, a number
of kernel warnings that taint the kernel are triggered:
<3> [525.823143] i915 0000:00:02.0: [drm] *ERROR* Failed to register driver for userspace access!
...
<4> [525.831069] ------------[ cut here ]------------
<4> [525.831071] i915 0000:00:02.0: [drm] drm_WARN_ON(power_domains->init_wakeref)
<4> [525.831095] WARNING: CPU: 6 PID: 3440 at drivers/gpu/drm/i915/display/intel_display_power.c:2074 intel_power_domains_disable+0xc2/0xd0 [i915]
...
<4> [525.831328] CPU: 6 UID: 0 PID: 3440 Comm: i915_module_loa Tainted: G U 6.14.0-rc1-CI_DRM_16076-g7a632b6798b6+ #1
...
<4> [525.831334] RIP: 0010:intel_power_domains_disable+0xc2/0xd0 [i915]
...
<4> [525.831483] Call Trace:
<4> [525.831484] <TASK>
...
<4> [525.831943] i915_driver_remove+0x4b/0x140 [i915]
<4> [525.832028] i915_pci_remove+0x1e/0x40 [i915]
<4> [525.832099] pci_device_remove+0x3e/0xb0
<4> [525.832103] device_remove+0x40/0x80
<4> [525.832107] device_release_driver_internal+0x215/0x280
...
Moreover, that unexpected PM reference is left untouched (not released)
but overwritten, then that triggers another kernel warning at driver
release phase:
<4> [526.685700] ------------[ cut here ]------------
<4> [526.685706] i915 0000:00:02.0: [drm] i915 raw-wakerefs=1 wakelocks=1 on cleanup
<4> [526.685734] WARNING: CPU: 1 PID: 3440 at drivers/gpu/drm/i915/intel_runtime_pm.c:443 intel_runtime_pm_driver_release+0x75/0x90 [i915]
...
<4> [526.686090] RIP: 0010:intel_runtime_pm_driver_release+0x75/0x90 [i915]
...
<4> [526.686294] Call Trace:
<4> [526.686296] <TASK>
...
<4> [526.687025] i915_driver_release+0x7e/0xb0 [i915]
<4> [526.687243] drm_dev_put.part.0+0x47/0x90
<4> [526.687250] devm_drm_dev_init_release+0x13/0x30
<4> [526.687255] devm_action_release+0x12/0x30
<4> [526.687261] release_nodes+0x3a/0x120
<4> [526.687268] devres_release_all+0x97/0xe0
<4> [526.687277] device_unbind_cleanup+0x12/0x80
<4> [526.687282] device_release_driver_internal+0x23a/0x280
...
A call to intel_power_domains_disable() was already there. It triggers
the drm_WARN_ON() when it finds a reference to a wakeref taken on device
probe and not released after device registration failure. That wakeref is
then left held forever once its handle gets lost overwritten with another
wakeref, hence another WARN() is called from
intel_runtime_pm_driver_release().
The WARN() triggered by kernfs_remove_by_name_ns() from
i915_teardown_sysfs()->i915_gpu_error_sysfs_teardown(), formerly
i915_teardown_error_capture(), was also there when the return was added.
A call to intel_gt_sysfs_unregister() that triggers the WARN() from
kobject_put() was added to intel_gt_driver_unregister() with commit
69d6bf5c37 ("drm/i915/gt: Fix memory leaks in per-gt sysfs").
Fix the asymmetry by failing the driver probe on device registration
failure and going through rewind paths.
For that to work as expected, we apparently need to start the rewind path
of i915_driver_register() with drm_dev_unregister(), even if
drm_dev_register() returned an error.
v5: Drop unsigned keyword from ret variable declaration (Krzysztof),
- keep the "Failed to register driver for userspace access" error
message (Krzysztof),
- split PXP cleanup addition to rewind path out to a separate patch.
v4: Switch to taking an error rewind path on device registration failure
(Krzysztof, Lucas).
v3: Based on Andi's commitment on introducing a flag, try to address
Jani's "must find another way" by finding a better place and name for
the flag (in hope that's what Jani had on mind),
- split into a series of patches and limit the scope of the first (this)
one to a minimum of omitting conditionally only those unregister
(sub)steps that trigger kernel warnings when not registered.
v2: Check in _unregister whether the drm_dev_register has succeeded and
skip some of the _unregister() steps. (Andi)
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10047
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10131
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10887
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12817
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314205202.809563-8-janusz.krzysztofik@linux.intel.com
Commit f67986b011 ("drm/i915/pxp: Promote pxp subsystem to top-level
of i915") added PXP initialization to driver probe path, but didn't add a
respective PXP cleanup on probe error. That lack of cleanup seems
harmless as long as PXP is still unused and idle when a probe failure
occurs and error rewind path is entered, but as soon as PXP starts
consuming device and driver resources keeping them busy, kernel warnings
may be triggered when cleaning up resources provided by memory regions,
GGTT, GEM and/or VMA cache from the probe error rewind and/or module
unload paths because of missing PXP cleanup. That scenario was observed
on attempts to fail the probe and enter the rewind path on injection of
now ignored error in device registration path.
Fix it.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314205202.809563-7-janusz.krzysztofik@linux.intel.com
Commit 8f460e2c78 ("drm/i915: Demidlayer driver loading") which
introduced manual device registration also added a message that is
submitted on device registration failure as an error. If that failure is
triggered by error injection test, that's an expected error, but CI still
reports it as a bug. Fix it.
Suggested-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9820
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314205202.809563-6-janusz.krzysztofik@linux.intel.com
msleep is very imprecise for timeouts shorter than 20
milliseconds and most probably will sleep longer. Use
uslee_range() instead.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314021225.11813-5-andi.shyti@linux.intel.com
The access to the PCI config space via pci_ops::read and pci_ops::write is
a low-level hardware access. The functions can be accessed with disabled
interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this
purpose.
A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in
the same context as the pci_lock.
Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with
interrupts disabled.
This was reported as:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
Call Trace:
rt_spin_lock+0x4e/0x130
vmd_pci_read+0x8d/0x100 [vmd]
pci_user_read_config_byte+0x6f/0xe0
pci_read_config+0xfe/0x290
sysfs_kf_bin_read+0x68/0x90
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
[bigeasy: reword commit message]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/r/20250218080830.ufw3IgyX@linutronix.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: add back report info from
https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When s2[i] = '\0', if s1[i] != '\0', it will be judged by ret,
and if s1[i] = '\0', it will be judegd by !s1[i].
So in reality, s2 [i] will never make a judgment
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250314031013.94480-1-yangfeng59949@163.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 4d320e30ee ("rust: platform: fix unrestricted &mut
platform::Device") changed the definition of platform::Device and
discarded the implicitly derived Send and Sync traits.
This isn't required by upstream code yet, and hence did not cause any
issues. However, it is relied on by upcoming drivers, hence add it back
in.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250318212940.137577-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7b948a2af6 ("rust: pci: fix unrestricted &mut pci::Device")
changed the definition of pci::Device and discarded the implicitly
derived Send and Sync traits.
This isn't required by upstream code yet, and hence did not cause any
issues. However, it is relied on by upcoming drivers, hence add it back
in.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250318212940.137577-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
orangefs_bufmap_shift_query() last use was removed in 2018 by
commit 9f8fd53cd0 ("orangefs: revamp block sizes")
orangefs_bufmap_page_fill() last use was removed in 2021 by
commit 0c4b7cadd1 ("Orangef: implement orangefs_readahead.")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
$ pahole -C pyrf_event /tmp/build/perf-tools-next/python/perf.cpython-312-x86_64-linux-gnu.so
struct pyrf_event {
PyObject ob_base; /* 0 16 */
struct evsel * evsel; /* 16 8 */
struct perf_sample sample; /* 24 312 */
/* XXX last struct has 7 bytes of padding, 2 holes */
/* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */
union perf_event event; /* 336 4168 */
/* size: 4504, cachelines: 71, members: 4 */
/* member types with holes: 1, total: 2 */
/* paddings: 1, sum paddings: 7 */
/* last cacheline: 24 bytes */
};
$
It was doing so without checking if the event just obtained has more
than that space, fix it.
This isn't a proper, final solution, as we need to support larger
events, but for the time being we at least bounds check and document it.
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-7-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When processing tracepoints the perf python binding was parsing the
event before calling perf_mmap__consume(&md->core) in
pyrf_evlist__read_on_cpu().
But part of this event parsing was to set the perf_sample->raw_data
pointer to the payload of the event, which then could be overwritten by
other event before tracepoint fields were asked for via event.prev_comm
in a python program, for instance.
This also happened with other fields, but strings were were problems
were surfacing, as there is UTF-8 validation for the potentially garbled
data.
This ended up showing up as (with some added debugging messages):
( field 'prev_comm' ret=0x7f7c31f65110, raw_size=68 ) ( field 'prev_pid' ret=0x7f7c23b1bed0, raw_size=68 ) ( field 'prev_prio' ret=0x7f7c239c0030, raw_size=68 ) ( field 'prev_state' ret=0x7f7c239c0250, raw_size=68 ) time 14771421785867 prev_comm= prev_pid=1919907691 prev_prio=796026219 prev_state=0x303a32313175 ==>
( XXX '��' len=16, raw_size=68) ( field 'next_comm' ret=(nil), raw_size=68 ) Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 51, in <module>
main()
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 46, in main
event.next_comm,
^^^^^^^^^^^^^^^
AttributeError: 'perf.sample_event' object has no attribute 'next_comm'
When event.next_comm was asked for, the PyUnicode_FromString() python
API would fail and that tracepoint field wouldn't be available, stopping
the tools/perf/python/tracepoint.py test tool.
But, since we already do a copy of the whole event in pyrf_event__new,
just use it and while at it remove what was done in in e8968e6541
("perf python: Fix pyrf_evlist__read_on_cpu event consuming") because we
don't really need to wait for parsing the sample before declaring the
event as consumed.
This copy is questionable as is now, as it limits the maximum event +
sample_type and tracepoint payload to sizeof(union perf_event), this all
has been "working" because 'struct perf_event_mmap2', the largest entry
in 'union perf_event' is:
$ pahole -C perf_event ~/bin/perf | grep mmap2
struct perf_record_mmap2 mmap2; /* 0 4168 */
$
Fixes: bae57e3825 ("perf python: Add support to resolve tracepoint fields")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-6-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db1 ("perf python: Add struct evsel into struct pyrf_event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Otherwise when debugging we see just "python" in perf, top, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-4-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When python2 support was removed in e7e9943c87 ("perf python:
Remove python 2 scripting support"), all use of the
_PyUnicode_FromString(arg), _PyUnicode_FromFormat(...), and
_PyLong_FromLong(arg) macros was removed as well, so remove it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Some old cut'n'paste error, its "ip", so the description should be
"event ip", not "event type".
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
After my previous patch, the ioport_map() function changed from
the lib/iomap.c version to the asm-generic/io.h version, which
requires a correct PCI_IOBASE definition.
Unfortunately the types are also different, so add the correct
definition for ioport_map() in asm/io.h and change the machine
specific ones to have the correct type.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* fix mmc A clock gate definition on g12 SoCs
* proprely set cpu cluster A on g12b
* fix 32k clock definition on gxbb
* correct documentation typo on a1
-----BEGIN PGP SIGNATURE-----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=pk4o
-----END PGP SIGNATURE-----
Merge tag 'clk-meson-v6.15-1' of https://github.com/BayLibre/clk-meson into clk-amlogic
Pull Amlogic clk driver updates from Jerome Brunet:
- Fix mmc A clock gate definition on Amlogic g12 SoCs
- Properly set cpu cluster A on Amlogic g12b
- Fix 32k clock definition on Amlogic gxbb
- Correct documentation typo on Amlogic a1
* tag 'clk-meson-v6.15-1' of https://github.com/BayLibre/clk-meson:
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
In my tests terminating a transaction took about 25ms, what is
in line with the chip-internal timeout as described in 5.21.3.2
"Bus Time Out" in [0]. Therefore the 2ms delay is too low.
Instead of a fixed delay let's use i801_wait_intr() here,
this also facilitates the status handling.
This potential issue seems to have been existing forever, but as no
related problem is known, treat it as an improvement.
[0] Intel document #326776-003, 7 Series PCH datasheet
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ad4ef645-5d03-4833-a0b6-f31f8fd06483@gmail.com
Ensure reset_control_assert() is called after pm_runtime_set_suspended()
in the cdns_i2c_probe exit path to maintain proper power management
sequence in error cases.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250206115708.1085523-3-manikanta.guntupalli@amd.com
Clock handling can be very simplified with using devm_clk_get_enabled() as
was done by commit 8d2aaf4382 ("gpio: zynq: Simplify using
devm_clk_get_enabled()").
And also fix issue in connection to incorrect sequence when err_clk_dis
label is called.
When reset_control_deassert() fails it jumps to err_clk_dis label which
disables clock and also disable pm_runtime setup but nothing has been setup
at this time of failure because initialization is done below
reset_control_deassert() call.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250206115708.1085523-2-manikanta.guntupalli@amd.com
Corrected a spelling mistake in the i2c-exynos5 driver to improve code
readability. No functional changes were made.
Signed-off-by: Anindya Sundar Gayen <anindya.sg@samsung.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250228133745.35053-1-anindya.sg@samsung.com
Add compatible string "fsl,imx94-lpi2c" for the i.MX94 chip, which is
backward compatible with i.MX7ULP. Set it to fall back to
"fsl,imx7ulp-lpi2c".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250306155815.110514-1-Frank.Li@nxp.com
