[ Upstream commit 12784ca33b ]
Use the basic quirk for this type of amplifier. Sound works in speakers,
headphones, and microphone. Whereas none worked before.
Tested-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20250227175107.33432-3-lkml@antheas.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 011ea742a2 ]
If a data sector on an OFS floppy contains a value > 0x1e8 (the
largest amount of data that fits in the sector after its header), then
an Amiga reading the file can return corrupt data, by taking the
overlarge size at its word and reading past the end of the buffer it
read the disk sector into!
The cause: when affs_write_end_ofs() writes data to an OFS filesystem,
the new size field for a data block was computed by adding the amount
of data currently being written (into the block) to the existing value
of the size field. This is correct if you're extending the file at the
end, but if you seek backwards in the file and overwrite _existing_
data, it can lead to the size field being larger than the maximum
legal value.
This commit changes the calculation so that it sets the size field to
the max of its previous size and the position within the block that we
just wrote up to.
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4cf8ec4de ]
If I write a file to an OFS floppy image, and try to read it back on
an emulated Amiga running Workbench 1.3, the Amiga reports a disk
error trying to read the file. (That is, it's unable to read it _at
all_, even to copy it to the NIL: device. It isn't a matter of getting
the wrong data and being unable to parse the file format.)
This is because the 'sequence number' field in the OFS data block
header is supposed to be based at 1, but affs writes it based at 0.
All three locations changed by this patch were setting the sequence
number to a variable 'bidx' which was previously obtained by dividing
a file position by bsize, so bidx will naturally use 0 for the first
block. Therefore all three should add 1 to that value before writing
it into the sequence number field.
With this change, the Amiga successfully reads the file.
For data block reference: https://wiki.osdev.org/FFS_(Amiga)
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c3170628a ]
After commit 92cadedd9d ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on
suspend and then re-probed on resume.
This conflicts with some embedded boards that require to remain powered.
They will fail on resume with:
brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
ieee80211 phy1: brcmf_bus_started: failed: -110
ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
This commit checks for the Device Tree property 'cap-power-off-cards'.
If this property is not set, it means that we do not have the capability
to power off and should therefore remain powered.
Signed-off-by: Matthias Proske <email@matthias-proske.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56cf7ef0d4 ]
The PCI P2PDMA code will register the CMB block to the memory
hot-plugging subsystem, which have an alignment requirement. Memory
blocks that do not satisfy this alignment requirement (usually 2MB) will
lead to a WARNING from memory hotplugging.
Verify the CMB block's address and size against the alignment and only
try to send CMB blocks compatible with it to prevent this warning.
Tested on Intel DC D4502 SSD, which has a 512K CMB block that is too
small for memory hotplugging (thus PCI P2PDMA).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a3572e10f ]
CMB decoding should get disabled when the CMB block isn't successfully
registered to P2P DMA subsystem.
Clean up the CMBMSC register in this error handling codepath to disable
CMB decoding (and CMBLOC/CMBSZ registers).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a03e2082e6 ]
The firmware uses the newer version of the API in recent devices. For
older devices, we translate the rate to the new format.
Don't parse the rate with old parsing macros.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.13d70cdcbb4e.Ic92193bce4013b70a823cfef250ee79c16cf7c17@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7774e39200 ]
The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.
This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.
Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 646262c71a ]
Don't call ieee80211_debugfs_recreate_netdev() for virtual monitor
interface when deleting it.
The virtual monitor interface shouldn't have debugfs entries and trying
to update them will *create* them on deletion.
And when the virtual monitor interface is created/destroyed multiple
times we'll get warnings about debugfs name conflicts.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204164240.370153-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b999006e3 ]
Drop the sta TXQs on flush when the drivers is not supporting
flush.
ieee80211_set_disassoc() tries to clean up everything for the sta.
But it ignored queued frames in the sta TX queues when the driver
isn't supporting the flush driver ops.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204123129.9162-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c977393b8 ]
If 'regs' points to a local stack variable, prepare_frametrace() stores
all registers to the stack. This confuses objtool as it expects them to
be restored from the stack later.
The stores don't affect stack tracing, so use unwind hints to hide them
from objtool.
Fixes the following warnings:
arch/loongarch/kernel/traps.o: warning: objtool: show_stack+0xe0: stack state mismatch: reg1[22]=-1+0 reg2[22]=-2-160
arch/loongarch/kernel/traps.o: warning: objtool: show_stack+0xe0: stack state mismatch: reg1[23]=-1+0 reg2[23]=-2-152
Fixes: cb8a2ef084 ("LoongArch: Add ORC stack unwinder support")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/270cadd8040dda74db2307f23497bb68e65db98d.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503280703.OARM8SrY-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6309a5c43b ]
Thanks to CONFIG_DEBUG_SECTION_MISMATCH, empty functions can be
generated out of line. rcu_irq_work_resched() can be called from
noinstr code, so make sure it's always inlined.
Fixes: 564506495c ("rcu/context-tracking: Move deferred nocb resched to context tracking")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/e84f15f013c07e4c410d972e75620c53b62c1b3e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/d1eca076-fdde-484a-b33e-70e0d167c36d@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ac50f7311 ]
Thanks to CONFIG_DEBUG_SECTION_MISMATCH, empty functions can be
generated out of line. These can be called from noinstr code, so make
sure they're always inlined.
Fixes the following warnings:
vmlinux.o: warning: objtool: irqentry_nmi_enter+0xa2: call to ct_nmi_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_nmi_exit+0x16: call to ct_nmi_exit() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_exit+0x78: call to ct_irq_exit() leaves .noinstr.text section
Fixes: 6f0e6c1598 ("context_tracking: Take IRQ eqs entrypoints over RCU")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/8509bce3f536bcd4ae7af3a2cf6930d48c5e631a.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/d1eca076-fdde-484a-b33e-70e0d167c36d@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09f37f2d7b ]
sched_smt_active() can be called from noinstr code, so it should always
be inlined. The CONFIG_SCHED_SMT version already has __always_inline.
Do the same for its !CONFIG_SCHED_SMT counterpart.
Fixes the following warning:
vmlinux.o: error: objtool: intel_idle_ibrs+0x13: call to sched_smt_active() leaves .noinstr.text section
Fixes: 321a874a7e ("sched/smt: Expose sched_smt_present static key")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/1d03907b0a247cf7fb5c1d518de378864f603060.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503311434.lyw2Tveh-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 323d6db6dc ]
Due to the incorrect initial vector number in
rvu_nix_unregister_interrupts(), NIX_AF_INT_VEC_GEN is not
geeting free. Fix the vector number to include NIX_AF_INT_VEC_GEN
irq.
Fixes: 5ed66306ea ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327094054.2312-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fdba88a21 ]
When number of RVU VFs > 64, the vfs value passed to "rvu_queue_work"
function is incorrect. Due to which mbox workqueue entries for
VFs 0 to 63 never gets added to workqueue.
Fixes: 9bdc47a6e3 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327091441.1284-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f1eaabb4b ]
Correct detect condition is applied to the entire 5221 family of PHYs.
Fixes: 3abbd0699b ("net: phy: broadcom: add support for BCM5221 phy")
Signed-off-by: Jim Liu <jim.t90615@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e9b893404 ]
Prior to commit 496121c021 ("ACPI: processor: idle: Allow probing on
platforms with one ACPI C-state"), the acpi_idle driver wouldn't load on
systems without a valid C-State at least as deep as C2.
The behavior was desirable for guests on hypervisors such as VMWare
ESXi, which by default don't have the _CST ACPI method, and set the C2
and C3 latencies to 101 and 1001 microseconds respectively via the FADT,
to signify they're unsupported.
Since the above change though, these virtualized deployments end up
loading acpi_idle, and thus entering the default C1 C-State set by
acpi_processor_get_power_info_default(); this is undesirable for a
system that's communicating to the OS it doesn't want C-States (missing
_CST, and invalid C2/C3 in FADT).
Make acpi_processor_get_power_info_fadt() return -ENODEV in that case,
so that acpi_processor_get_cstate_info() exits early and doesn't set
pr->flags.power = 1.
Fixes: 496121c021 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250328143040.9348-1-ggherdovich@suse.cz
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29c92a41c6 ]
The arch_kgdb_breakpoint() function defines the kgdb_breakinst symbol
using inline assembly.
1. There's a potential issue where the compiler might inline
arch_kgdb_breakpoint(), which would then define the kgdb_breakinst
symbol multiple times, leading to a linker error.
To prevent this, declare arch_kgdb_breakpoint() as noinline.
Fix follow error with LLVM-19 *only* when LTO_CLANG_FULL:
LD vmlinux.o
ld.lld-19: error: ld-temp.o <inline asm>:3:1: symbol 'kgdb_breakinst' is already defined
kgdb_breakinst: break 2
^
2. Remove "nop" in the inline assembly because it's meaningless for
LoongArch here.
3. Add "STACK_FRAME_NON_STANDARD" for arch_kgdb_breakpoint() to avoid
the objtool warning.
Fixes: e14dd07696 ("LoongArch: Add basic KGDB & KDB support")
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Co-developed-by: Winston Wen <wentao@uniontech.com>
Signed-off-by: Winston Wen <wentao@uniontech.com>
Co-developed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be216cbc1d ]
It is the built-in command line appended to the bootloader command line,
not the bootloader command line appended to the built-in command line.
Fixes: fa96b57c14 ("LoongArch: Add build infrastructure")
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c73f0b6964 ]
The calculation of bytes-dropped and bytes_dropped_nested is reversed.
Although it does not affect the final calculation of total_dropped,
it should still be modified.
Link: https://lore.kernel.org/20250223070106.6781-1-yangfeng59949@163.com
Fixes: 6c43e554a2 ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fab0583568 ]
When hw-gro is enabled, the maximum number of header entries that are
needed per wqe (hd_per_wqe) is calculated based on the size of the
reservations among other parameters.
Miscalculation of the size of reservations leads to incorrect
calculation of hd_per_wqe as 0, particularly in the case of large page
size like in aarch64, this prevents the SHAMPO header from being
correctly initialized in the device, ultimately causing the following
cqe err that indicates a violation of PD.
mlx5_core 0000:00:08.0 eth2: ERR CQE on RQ: 0x1180
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x510, ci 0x0, qn 0x1180, opcode 0xe, syndrome 0x4, vendor syndrome 0x32
00000000: 00 00 00 00 04 4a 00 00 00 00 00 00 20 00 93 32
00000010: 55 00 00 00 fb cc 00 00 00 00 00 00 07 18 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a
00000030: 00 00 00 9a 93 00 32 04 00 00 00 00 00 00 da e1
Use the correct formula for calculating the size of reservations,
precisely it shouldn't be dependent on page size, instead use the
correct multiply of MLX5E_SHAMPO_WQ_BASE_RESRV_SIZE.
Fixes: e5ca8fb08a ("net/mlx5e: Add control path for SHAMPO feature")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742732906-166564-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddb7ea36ba ]
r_count is only increased when there is an oplock break wait,
so r_count inc/decrement are not paired. This can cause r_count
to become negative, which can lead to a problem where the ksmbd
thread does not terminate.
Fixes: 3aa660c059 ("ksmbd: prevent connection release during oplock break notification")
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1883049aa ]
ksmbd check that the session of second channel is in the session list of
first connection. If it is in session list, multichannel connection
should not be allowed.
Fixes: b95629435b ("ksmbd: fix racy issue from session lookup and expire")
Reported-by: Sean Heelan <seanheelan@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6171063e9d ]
Use aead_request_free() instead of kfree() to properly free memory
allocated by aead_request_alloc(). This ensures sensitive crypto data
is zeroed before being freed.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67d1a8956d ]
Set FLAG_WWAN instead of FLAG_ETHERNET for RNDIS interfaces on Mobile
Broadband Modems, as opposed to regular Ethernet adapters.
Otherwise NetworkManager gets confused, misjudges the device type,
and wouldn't know it should connect a modem to get the device to work.
What would be the result depends on ModemManager version -- older
ModemManager would end up disconnecting a device after an unsuccessful
probe attempt (if it connected without needing to unlock a SIM), while
a newer one might spawn a separate PPP connection over a tty interface
instead, resulting in a general confusion and no end of chaos.
The only way to get this work reliably is to fix the device type
and have good enough version ModemManager (or equivalent).
Fixes: 63ba395cd7 ("rndis_host: support Novatel Verizon USB730L")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://patch.msgid.link/20250325095842.1567999-1-lkundrak@v3.sk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e35366bc ]
xfstests generic/730 test failed because after deleting the device
that still had dirty data, the file could still be read without
returning an error. The reason is the missing shutdown check in
->read_iter.
I also noticed that shutdown checks were missing from ->write_iter,
->splice_read, and ->mmap. This commit adds shutdown checks to all
of them.
Fixes: f761fcdd28 ("exfat: Implement sops->shutdown and ioctl")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0522303f6 ]
In exfat_find_last_cluster(), the cluster chain is traversed until
the EOF cluster. If the cluster chain includes a loop due to file
system corruption, the EOF cluster cannot be traversed, resulting
in an infinite loop.
If the number of clusters indicated by the file size is inconsistent
with the cluster chain length, exfat_find_last_cluster() will return
an error, so if this inconsistency is found, the traversal can be
aborted without traversing to the EOF cluster.
Reported-by: syzbot+f7d147e6db52b1e09dba@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f7d147e6db52b1e09dba
Tested-by: syzbot+f7d147e6db52b1e09dba@syzkaller.appspotmail.com
Fixes: 31023864e6 ("exfat: add fat entry operations")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e7f1644f2 ]
Commit ef7134c7fc ("smb: client: Fix use-after-free of network
namespace.") attempted to fix a netns use-after-free issue by manually
adjusting reference counts via sk->sk_net_refcnt and sock_inuse_add().
However, a later commit e9f2517a3e ("smb: client: fix TCP timers deadlock
after rmmod") pointed out that the approach of manually setting
sk->sk_net_refcnt in the first commit was technically incorrect, as
sk->sk_net_refcnt should only be set for user sockets. It led to issues
like TCP timers not being cleared properly on close. The second commit
moved to a model of just holding an extra netns reference for
server->ssocket using get_net(), and dropping it when the server is torn
down.
But there remain some gaps in the get_net()/put_net() balancing added by
these commits. The incomplete reference handling in these fixes results
in two issues:
1. Netns refcount leaks[1]
The problem process is as follows:
```
mount.cifs cifsd
cifs_do_mount
cifs_mount
cifs_mount_get_session
cifs_get_tcp_session
get_net() /* First get net. */
ip_connect
generic_ip_connect /* Try port 445 */
get_net()
->connect() /* Failed */
put_net()
generic_ip_connect /* Try port 139 */
get_net() /* Missing matching put_net() for this get_net().*/
cifs_get_smb_ses
cifs_negotiate_protocol
smb2_negotiate
SMB2_negotiate
cifs_send_recv
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
cifs_reconnect
cifs_abort_connection
sock_release();
server->ssocket = NULL;
/* Missing put_net() here. */
generic_ip_connect
get_net()
->connect() /* Failed */
put_net()
sock_release();
server->ssocket = NULL;
free_rsp_buf
...
clean_demultiplex_info
/* It's only called once here. */
put_net()
```
When cifs_reconnect() is triggered, the server->ssocket is released
without a corresponding put_net() for the reference acquired in
generic_ip_connect() before. it ends up calling generic_ip_connect()
again to retry get_net(). After that, server->ssocket is set to NULL
in the error path of generic_ip_connect(), and the net count cannot be
released in the final clean_demultiplex_info() function.
2. Potential use-after-free
The current refcounting scheme can lead to a potential use-after-free issue
in the following scenario:
```
cifs_do_mount
cifs_mount
cifs_mount_get_session
cifs_get_tcp_session
get_net() /* First get net */
ip_connect
generic_ip_connect
get_net()
bind_socket
kernel_bind /* failed */
put_net()
/* after out_err_crypto_release label */
put_net()
/* after out_err label */
put_net()
```
In the exception handling process where binding the socket fails, the
get_net() and put_net() calls are unbalanced, which may cause the
server->net reference count to drop to zero and be prematurely released.
To address both issues, this patch ties the netns reference counting to
the server->ssocket and server lifecycles. The extra reference is now
acquired when the server or socket is created, and released when the
socket is destroyed or the server is torn down.
[1]: https://bugzilla.kernel.org/show_bug.cgi?id=219792
Fixes: ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
Fixes: e9f2517a3e ("smb: client: fix TCP timers deadlock after rmmod")
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3e998a0b ]
The nfs_client manages state for all the superblocks in the
"cl_superblocks" list, so it must not be shut down until all of them are
gone.
Fixes: 7d3e26a054 ("NFS: Cancel all existing RPC tasks when shutdown")
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e63d465f59 ]
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()
Fixes: 173a64cb3f ("[media] dib8000: enhancement")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/bd1d504d930ae3f073b1e071bcf62cae7708773c.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503210602.fvH5DO1i-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e6ec8cf64 ]
The struct thermal_zone_device is already declared on line 32, so the
duplicate declaration has been removed.
Fixes: b1ae92dcfa ("thermal: core: Make struct thermal_zone_device definition internal")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://lore.kernel.org/r/20250206081436.51785-1-luoxueqin@kylinos.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35d13f841a ]
The previous change to support cgroup filters introduced a bug that
pathname can include commas. It confused the lexer to treat an item and
the trailing comma as a single token. And it resulted in a parse error:
$ sudo perf record -e cycles:P --filter 'period > 0, ip > 64' -- true
perf_bpf_filter: Error: Unexpected item: 0,
perf_bpf_filter: syntax error, unexpected BFT_ERROR, expecting BFT_NUM
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--filter <filter>
event filter
It should get "0" and "," separately.
An easiest fix would be to remove "," from the possible pathname
characters. As it's for cgroup names, probably ok to assume it won't
have commas in the pathname.
I found that the existing BPF filtering test didn't have any complex
filter condition with commas. Let's update the group filter test which
is supposed to test filter combinations like this.
Link: https://lore.kernel.org/r/20250307220922.434319-1-namhyung@kernel.org
Fixes: 91e88437d5 ("perf bpf-filter: Support filtering on cgroups")
Reported-by: Sally Shi <sshii@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a352a90e8 ]
Annotate so it is built with non-executable stack.
Fixes: 8b97519711 ("perf test: Add asm pureloop test tool")
Signed-off-by: Marcus Meissner <meissner@suse.de>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250323085410.23751-1-meissner@suse.de
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6287fbad1c ]
proc_pid_wchan() used to report kernel addresses to user space but that is
no longer the case today. Bring the comment above proc_pid_wchan() in
sync with the implementation.
Link: https://lkml.kernel.org/r/20250319210222.1518771-1-bvanassche@acm.org
Fixes: b2f73922d1 ("fs/proc, core/debug: Don't expose absolute kernel addresses via wchan")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 182f12f319 ]
frontend_bound metrics was miscalculated due to different scaling in
a couple of metrics it depends on. Change the scaling to match with
AmpereOne.
Fixes: 16438b652b ("perf vendor events arm64 AmpereOneX: Add core PMU events and metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250313201559.11332-3-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d97aa06667 ]
tty_write_room() returns an "unsigned int". So in case some insane
driver (like my tty test driver) returns (legitimate) UINT_MAX from its
tty_operations::write_room(), n_tty is confused on several places.
For example, in process_output_block(), the result of tty_write_room()
is stored into (signed) "int". So this UINT_MAX suddenly becomes -1. And
that is extended to ssize_t and returned from process_output_block().
This causes a write() to such a node to receive -EPERM (which is -1).
Fix that by using proper "unsigned int" and proper "== 0" test. And
return 0 constant directly in that "if", so that it is immediately clear
what is returned ("space" equals to 0 at that point).
Similarly for process_output() and __process_echoes().
Note this does not fix any in-tree driver as of now.
If you want "Fixes: something", it would be commit 03b3b1a240 ("tty:
make tty_operations::write_room return uint"). I intentionally do not
mark this patch by a real tag below.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3db89bc6d9 ]
In case vchiq_platform_conn_state_changed() is never called or fails before
driver removal, ka_thread won't be a valid pointer to a task_struct. So
do the necessary checks before calling kthread_stop to avoid a crash.
Fixes: 863a756aaf ("staging: vc04_services: vchiq_core: Stop kthreads on vchiq module unload")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250309125014.37166-3-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d2dcd6352 ]
zfree() requires an address otherwise it frees what's in name, rather
than name itself. Pass the address of name to fix it.
This was the only incorrect occurrence in Perf found using a search.
Fixes: 8db5cabcf1 ("perf stat: Fork and launch 'perf record' when 'perf stat' needs to get retire latency value for a metric.")
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250319101614.190922-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebf0b33273 ]
Kernel modules for which we cannot find a file on-disk will have a
dso->long_name that looks like "[module_name]". Prior to the commit
listed in the fixes, the dso->kernel field would be zero (for user
space), so dso__is_kallsyms() would return false. After the commit,
kernel module DSOs are correctly labeled, but the result is that
dso__is_kallsyms() erroneously returns true for those modules without a
filesystem path.
Later, build_id_cache__add() consults this value of is_kallsyms, and
when true, it copies /proc/kallsyms into the cache. Users with many
kernel modules without a filesystem path (e.g. ksplice or possibly
kernel live patch modules) have reported excessive disk space usage in
the build ID cache directory due to this behavior.
To reproduce the issue, it's enough to build a trivial out-of-tree hello
world kernel module, load it using insmod, and then use:
perf record -ag -- sleep 1
In the build ID directory, there will be a directory for your module
name containing a kallsyms file.
Fix this up by changing dso__is_kallsyms() to consult the
dso_binary_type enumeration, which is also symmetric to the above checks
for dso__is_vmlinux() and dso__is_kcore(). With this change, kallsyms is
not cached in the build-id cache for out-of-tree modules.
Fixes: 02213cec64 ("perf maps: Mark module DSOs with kernel type")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/20250318230012.2038790-1-stephen.s.brennan@oracle.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89aaeaf842 ]
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
$ pahole -C pyrf_event /tmp/build/perf-tools-next/python/perf.cpython-312-x86_64-linux-gnu.so
struct pyrf_event {
PyObject ob_base; /* 0 16 */
struct evsel * evsel; /* 16 8 */
struct perf_sample sample; /* 24 312 */
/* XXX last struct has 7 bytes of padding, 2 holes */
/* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */
union perf_event event; /* 336 4168 */
/* size: 4504, cachelines: 71, members: 4 */
/* member types with holes: 1, total: 2 */
/* paddings: 1, sum paddings: 7 */
/* last cacheline: 24 bytes */
};
$
It was doing so without checking if the event just obtained has more
than that space, fix it.
This isn't a proper, final solution, as we need to support larger
events, but for the time being we at least bounds check and document it.
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-7-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
