The TODO asked for a build-time check to guard against missing new sync
fields. Remove it, as code review is sufficient to catch such issues.
Signed-off-by: Piotr Zarycki <piotr.zarycki@gmail.com>
Link: https://patch.msgid.link/20260512161317.2580678-1-piotr.zarycki@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refresh KVM's copies of CR0 and CR3 from the VMCB prior to (potentially)
invoking a fastpath handler to ensure that KVM doesn't consume stale
state. While it's unlikely KVM will ever consume CR3 or CR0.{TS,MP} in
the fastpath, grabbing the values from the VMCB is inexpensive, i.e. the
risk of subtle bugs far outweighs the reward of deferring reads for a
small subset of VM-Exits.
Note, KVM doesn't currently consume CR3 or CR0.{TS,MP} in the fastpath,
as KVM requires next_rip to be valid (i.e. KVM doesn't read CR3 to decode
the instruction), CR0.MP is never consumed, and CR0.TS is only consumed by
the full emulator.
Reviewed-by: Nikunj A. Dadhania <nikunj@amd.com>
Link: https://patch.msgid.link/20260423162628.490962-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the handling of fastpath userspace exits into vendor code to ensure
KVM runs vendor specific operations that need to run before userspace gains
control of the vCPU. E.g. for VMX (and soon to be for SVM as well), KVM
needs to flush the PML buffer prior to exiting to userspace, otherwise any
memory written by the final KVM_RUN might never be flagged as dirty.
Note, waiting to snapshot CR0 and CR3 until svm_handle_exit() is flawed in
general, as that risks consuming stale state in a fastpath handler. That
will be addressed in a future change.
Fixes: f7f39c50ed ("KVM: x86: Exit to userspace if fastpath triggers one on instruction skip")
Cc: stable@vger.kernel.org
Cc: Nikunj A. Dadhania <nikunj@amd.com>
Reviewed-by: Nikunj A. Dadhania <nikunj@amd.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20260423162628.490962-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
x86_virt_invoke_kvm_emergency_callback() reaches rcu_dereference()
through machine_crash_shutdown() with IRQs disabled but with RCU not
necessarily watching the crashing CPU, which triggers a suspicious
RCU usage splat on debug kernels (CONFIG_PROVE_RCU=y) during
panic/kdump:
WARNING: suspicious RCU usage
arch/x86/virt/hw.c:52 suspicious rcu_dereference_check() usage!
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by tee/11119:
#0: ffff8881fa32c440 (sb_writers#3){.+.+}-{0:0}, at: ksys_write
Call Trace:
<TASK>
dump_stack_lvl+0x84/0xd0
lockdep_rcu_suspicious.cold+0x37/0x8f
x86_virt_invoke_kvm_emergency_callback+0x5f/0x70
x86_svm_emergency_disable_virtualization_cpu+0x2a/0x30
x86_virt_emergency_disable_virtualization_cpu+0x6b/0x90
native_machine_crash_shutdown+0x72/0x170
__crash_kexec+0x137/0x280
panic+0xce/0xd0
sysrq_handle_crash+0x1f/0x20
__handle_sysrq.cold+0x192/0x335
write_sysrq_trigger+0x8c/0xc0
proc_reg_write+0x1c3/0x3c0
vfs_write+0x1d0/0xf80
ksys_write+0x116/0x250
do_syscall_64+0x11c/0x1480
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
A truly correct fix is non-trivial: the RCU usage genuinely is wrong in
panic context (RCU may ignore the crashing CPU during synchronization),
and a concurrent KVM module unload could in principle race with the
callback read; see commit 2baa33a8dd ("KVM: x86: Leave user-return
notifier registered on reboot/shutdown") which notes that nothing
prevents module unload during panic/reboot.
However, the alternatives are worse:
- smp_store_release()/smp_load_acquire() handles ordering but not
liveness; the kernel still needs to keep the module text alive
while the callback is in flight.
- Taking a lock in the panic path is risky — any lock could be held
by a CPU that has already been NMI'd to a halt.
Use rcu_dereference_raw() to silence the splat and accept the
vanishingly small remaining race. Panic context inherently cannot
guarantee complete correctness; the goal here is to keep debug builds
quiet on the kdump path so the splat doesn't obscure the actual
kernel state being captured.
Reproducible on a debug kernel (CONFIG_PROVE_LOCKING=y, CONFIG_PROVE_RCU=y)
with kvm_amd or kvm_intel loaded by triggering kdump:
echo c > /proc/sysrq-trigger
Suggested-by: Sean Christopherson <seanjc@google.com>
Fixes: 428afac5a8 ("KVM: x86: Move bulk of emergency virtualizaton logic to virt subsystem")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260504235435.90957-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Include both linux/mman.h (the kernel provided version) and sys/mman.h (the
libc provided version) throughout KVM selftests, by way of kvm_syscalls.h
(which should have been including sys/mman.h anyways). Pulling in the
kernel's version fixes compilation errors with the guest_memfd test on
older versions of libc due to a recent commit adding MADV_COLLAPSE testing.
In file included from include/kvm_util.h:8,
from guest_memfd_test.c:21:
guest_memfd_test.c: In function ‘test_collapse’:
guest_memfd_test.c:219:47: error: ‘MADV_COLLAPSE’ undeclared (first use in this function); did you mean ‘MADV_COLD’?
219 | TEST_ASSERT_EQ(madvise(mem, pmd_size, MADV_COLLAPSE), -1);
| ^~~~~~~~~~~~~
include/test_util.h:62:16: note: in definition of macro ‘TEST_ASSERT_EQ’
62 | typeof(a) __a = (a); \
| ^
guest_memfd_test.c:219:47: note: each undeclared identifier is reported only once for each function it appears in
219 | TEST_ASSERT_EQ(madvise(mem, pmd_size, MADV_COLLAPSE), -1);
| ^~~~~~~~~~~~~
include/test_util.h:62:16: note: in definition of macro ‘TEST_ASSERT_EQ’
62 | typeof(a) __a = (a); \
| ^
Route the includes through kvm_syscalls.h to try and avoid a future game
of whack-a-mole, i.e. so that future expansion of test coverage doesn't run
into the same problem.
To discourage use of sys/mman.h, opportunistically include the kernel's
version of mman.h in test_util.h as it only needs MAP_SHARED, i.e. only
needs the full set of kernel defs, not the libc syscall wrappers.
Fixes: 9830209b4a ("KVM: selftests: Test MADV_COLLAPSE on guest_memfd")
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Closes: https://lore.kernel.org/all/20260427204313.50741-1-rick.p.edgecombe@intel.com
Link: https://patch.msgid.link/20260428012503.1213654-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename kvm_mmu_invalidate_begin() to kvm_mmu_invalidate_start() to
align with mmu_notifier_ops.invalidate_range_start(), which is the
callback that ultimately drives KVM's MMU invalidation.
While the naming within KVM itself is a close split between "_begin" and
"_start":
$ git grep -E "invalidate(_range)?_begin" **/kvm* | wc -l
12
$ git grep -E "invalidate(_range)?_start" **/kvm* | wc -l
21
All two of the begin() uses are in KVM:
$ git grep -E "invalidate(_range)?_begin" * | wc -l
14
And those two holdouts are bugs in invalidate_range_start()'s comment,
i.e. will also be fixed sooner or later[*]. On the other hand, use of
_start() is pervasive throughout the kernel:
$ git grep -E "invalidate(_range)?_start" * | wc -l
117
Even if that weren't the case, conforming to the mmu_notifier_ops naming
is the right call since invalidate_range_start() is the external API that
KVM hooks into.
No functional change intended.
Link: https://lore.kernel.org/all/20260513163546.1176742-1-seanjc@google.com [*]
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Link: https://patch.msgid.link/20260420154720.29012-4-itazur@amazon.com
[sean: massage changelog to provide more (accurate) numbers]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for the global clock controller (GCC) on the
Qualcomm Hawi SoC.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-clk-hawi-v3-7-530b538679f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add clock operations and register offsets to enable control of the Taycan
EHA_T PLL, allowing for proper configuration and management of the PLL.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-clk-hawi-v3-6-530b538679f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the TCSR clock controller found on the Qualcomm Hawi SoC.
This controller provides reference clocks for various peripherals
including PCIe, UFS, and USB.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-clk-hawi-v3-5-530b538679f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the global clock controller on the
Qualcomm Hawi SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-clk-hawi-v3-3-530b538679f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Hawi uses the same protection domain layout as Kaanapali, so reuse the
kaanapali_domains table. Also add the missing adsp_ois_pd entry (OIS
protection domain, instance_id 74) to kaanapali_domains, which is
required by both Kaanapali and Hawi.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506110226.2256249-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Hawi is a mobile platform that is compatible with Kaanapali platform
with respect to pmic-glink support. Add the Hawi compatible string
with Kaanapali as a fallback.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260419-hawi-pmic-glink-v1-1-a26908c468fc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Capitalize occurrences of the acronym "LLCC" and "EDAC" in comments
and diagnostic text to improve consistency and readability.
Signed-off-by: Francisco Munoz Ruiz <francisco.ruiz@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407-external_llcc_changes2set-v2-3-b5017ce2020b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Retrieve System Cache Table (SCT) descriptors from a shared memory
region populated by firmware.
SCT initialization and programming are performed entirely by firmware
outside of Linux. The LLCC driver only consumes the pre-initialized
descriptor data and does not configure SCT itself.
Support this mechanism for future SoCs that provide SCT programming
via firmware.
Signed-off-by: Francisco Munoz Ruiz <francisco.ruiz@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407-external_llcc_changes2set-v2-2-b5017ce2020b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add documentation for the Last Level Cache Controller (LLCC) bindings
to support Hawi SoC where the System Cache Table (SCT) is programmed
by firmware outside of Linux.
Introduce a property that specifies the base address of the shared
memory region from which the driver should read SCT descriptors
provided by firmware.
Signed-off-by: Francisco Munoz Ruiz <francisco.ruiz@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407-external_llcc_changes2set-v2-1-b5017ce2020b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add deprecated property 'port' and 'display-timings' for i.MX5 SoCs (over
15 years) to fix below CHECK_DTBS warnings:
arm/boot/dts/nxp/imx/imx51-apf51dev.dtb: disp1 (fsl,imx-parallel-display): 'display-timings', 'port' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/display/imx/fsl,imx-parallel-display.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260511220924.1905571-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Define regs_{avail,dirty} as bitmaps instead of U32s to harden against
overflow, and to allow for dynamically sizing the bitmaps when APX comes
along, which will add 16 more GPRs (R16-R31) and thus increase the total
number of registers beyond 32.
Open code writes in the "reset" APIs, as the writes are hot paths and
bitmap_write() is complete overkill for what KVM needs. Even better,
hardcoding writes to entry '0' in the array is a perfect excuse to assert
that the array contains exactly one entry, e.g. to effectively add guard
against defining R16-R31 in 32-bit kernels.
For all intents and purposes, no functional change intended even though
using bitmap_fill() will mean "undefined" registers are no longer marked
available and dirty (KVM should never be querying those bits).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260409224236.2021562-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert regs_{avail,dirty} and all related masks to "unsigned long" values
as an intermediate step towards declaring the fields as actual bitmaps, and
as a step toward support APX, which will push the total number of registers
beyond 32 on 64-bit kernels.
Opportunistically convert TDX's ULL bitmask to a UL to match everything
else (TDX is 64-bit only, so it's a nop in the end).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260409224236.2021562-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers for setting regs_{avail,dirty} in anticipation of turning the
fields into proper bitmaps, at which point direct writes won't work so
well.
Deliberately leave the initialization in kvm_arch_vcpu_create() as-is,
because the regs_avail logic in particular is special in that it's the one
and only place where KVM marks eagerly synchronized registers as available.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260409224236.2021562-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When switching between vmcs01 and vmcs02, do a bitwise-AND of regs_avail
to effectively reset the mask for the new VMCS, purely to be consistent
with all other "full" writes of regs_avail. In practice, a straight write
versus a bitwise-AND will yield the same result, as kvm_arch_vcpu_create()
marks *all* registers available (and dirty), and KVM never marks registers
unavailable unless they're lazily loaded.
This will allow adding wrapper APIs to set regs_{avail,dirty} without
having to add special handling for a nVMX use case that doesn't exist in
practice.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260409224236.2021562-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that NR_VCPU_REGS is no longer a thing, and now that now that RIP is
effectively an EXREG, drop the "EX" is for extended (or maybe extra?")
prefix from non-GPR registers to avoid a collision with APX (Advanced
Performance Extensions), which adds:
16 additional general-purpose registers (GPRs) R16–R31, also referred
to as Extended GPRs (EGPRs) in this document;
I.e. KVM's version of "extended" won't match with APX's definition.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260409224236.2021562-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_vcpu_arch.rip to track guest RIP instead of including it in the
generic regs[] array. Decoupling RIP from regs[] will allow using a
*completely* arbitrary index for RIP, as opposed to the mostly-arbitrary
index that is currently used. That in turn will allow using indices
16-31 to track R16-R31 that are coming with APX.
Note, although RIP can used for addressing, it does NOT have an
architecturally defined index, and so can't be reached via flows like
get_vmx_mem_address() where KVM "blindly" reads a general purpose register
given the SIB information reported by hardware. For RIP-relative
addressing, hardware reports the full "offset" in vmcs.EXIT_QUALIFICATION.
Note #2, keep the available/dirty tracking as RSP is context switched
through the VMCS, i.e. needs to be cached for VMX.
Opportunistically rename NR_VCPU_REGS to NR_VCPU_GENERAL_PURPOSE_REGS to
better capture what it tracks, and so that KVM can slot in R16-R13 without
running into weirdness where KVM's definition of "EXREG" doesn't line up
with APX's definition of "extended reg".
No functional change intended.
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260409224236.2021562-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yonghong Song says:
====================
bpf: Support stack arguments for BPF functions and kfuncs
Currently, bpf function calls and kfunc's are limited by 5 reg-level
parameters. For function calls with more than 5 parameters,
developers can use always inlining or pass a struct pointer
after packing more parameters in that struct although it may have
some inconvenience. But there is no workaround for kfunc if more
than 5 parameters is needed.
This patch set lifts the 5-argument limit by introducing stack-based
argument passing for BPF functions and kfunc's, coordinated with
compiler support in LLVM [1]. The compiler emits loads/stores through
a new bpf register r11 (BPF_REG_PARAMS), to pass arguments beyond
the 5th, keeping the stack arg area separate from the r10-based program
stack. The current maximum number of arguments is capped at
MAX_BPF_FUNC_ARGS (12), which is sufficient for the vast majority of
use cases.
All kfunc/bpf-function arguments are caller saved, including stack
arguments. For register arguments (r1-r5), the verifier already marks
them as clobbered after each call. For stack arguments, the verifier
invalidates all outgoing stack arg slots immediately after a call,
requiring the compiler to re-store them before any subsequent call.
This follows the native calling convention where all function
parameters are caller saved.
The x86_64 JIT translates r11-relative accesses to RBP-relative
native instructions. Each function's stack allocation is extended
by 'max_outgoing' bytes to hold the outgoing arg area below the
callee-saved registers. This makes implementation easier as the r10
can be reused for stack argument access. At both BPF-to-BPF and kfunc
calls, outgoing args are pushed onto the expected calling convention
locations directly. The incoming parameters can directly get the value
from caller.
Global subprogs and freplace progs with >5 args are not yet supported.
Only x86_64 and arm64 are supported for now. Same selftests are tested
by both x86_64 and arm64. Please see each individual patch for details.
[1] https://github.com/llvm/llvm-project/pull/189060
Changelogs:
v3 -> v4:
- v3: https://lore.kernel.org/bpf/20260511053301.1878610-1-yonghong.song@linux.dev/
- Added no_stack_arg_load comparison in func_states_equal() to ensure
correctness of pruning.
- Shrink bpf_jmp_history_entry.flags to 4bit to match the number of flags.
- Instead of passing bpf_subprog_info to JIT, use prog->aux->func_idx to
find corresponding bpf_subprog_info from 'env'.
- For patch 'bpf: Reject stack arguments if tail call reachable', use stack_arg_cnt
instead of just incoming stack arg cnt.
- Tighten invalidate_outgoing_stack_args() for kfunc/helper/bpf-to-bpf calls.
- Disable private stack in verifier for x86_64 instead of in JIT.
v2 -> v3:
- v2: https://lore.kernel.org/bpf/20260507212942.1122000-1-yonghong.song@linux.dev/
- In do_check_common() and for main prog, if btf does not match with actual
parameter, the verification will continue and will ignore arg_cnt. Make
arg_cnt=1 explictly to prevent any incoming stack arguments.
- Remove the loop which clear current frame stack slot and set the upper level frame
stack slot. This is not needed unless there is a bug. Add a verifier_bug
if the bug happens.
- For liveness, avoid r11 based load/stores mixing with r10 based stack tracking.
Also, print out stack arguments properly.
- Pass bpf_subprog_info the JIT so we can avoid copy bpf_subprog_info fields to
bpf_prog_aux.
- Fix the missed allocation free for test infra BTF fixup.
- Remove selftest result for precision backtracking test since the result would
be change (two possible output).
v1 -> v2:
- v1: https://lore.kernel.org/bpf/20260424171433.2034470-1-yonghong.song@linux.dev/
- Several refactoring (convert bpf_get_spilled_reg macro to static inline func,
Remove copy_register_state(), Refactor jmp history, Refactor record_call_access(), etc),
suggested by Eduard.
- Use incoming_stack_arg_cnt/stack_arg_cnt instead of incoming_stack_arg_depth/stack_arg_depth,
suggested by Eduard.
- Fix a stack arg pruning bug, from Eduard.
- Fix a bug for precision marking and backtracking, basically callee needs to get the
stack arg value from callers, helped from Eduard.
- Set sub->arg_cnt earlier in btf_prepare_func_args(), this will avoid having
incoming_stack_arg_cnt in bpf_subprog_info.
- Do stack-arg liveness analysis together with r10 based liveness analysis,
suggested by Eduard.
- Fix a few tests to ensure that r11-based loads cannot be ahead of r11-based stores,
and r11-based loads cannot be after kfunc/helper/bpf-function.
====================
Link: https://patch.msgid.link/20260513044949.2382019-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that arm64 supports stack arguments, enable the existing stack_arg,
stack_arg_kfunc and verifier_stack_arg tests for __TARGET_ARCH_arm64.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045204.2403441-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement stack argument passing for BPF-to-BPF and kfunc calls with
more than 5 parameters on arm64, following the AAPCS64 calling
convention.
BPF R1-R5 already map to x0-x4. With BPF_REG_0 moved to x8 by the
previous commit, x5-x7 are free for arguments 6-8. Arguments 9-12
spill onto the stack at [SP+0], [SP+8], ... and the callee reads
them from [FP+16], [FP+24], ... (above the saved FP/LR pair).
BPF convention uses fixed offsets from BPF_REG_PARAMS (r11): off=-8 is
always arg 6, off=-16 arg 7, etc. The verifier invalidates all outgoing
stack arg slots after each call, so the compiler must re-store before
every call. This means x5-x7 don't need to be saved on stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045158.2402494-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the BPF return value register from x7 to x8, freeing x7 for use
as an argument register. AAPCS64 designates x8 as the indirect result
location register; it is caller-saved and not used for argument
passing, making it a suitable home for BPF_REG_0.
This is a prerequisite for stack argument support, which needs x5-x7
to pass arguments 6-8 to native kfuncs following the AAPCS64 calling
convention.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045153.2402197-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test that verifies precision backtracking works correctly
across BPF-to-BPF calls when stack arguments are involved.
The test passes a size value as incoming stack arg (arg6) to a
subprog, which forwards it as the mem__sz parameter (outgoing arg7)
to bpf_kfunc_call_stack_arg_mem. The expected __msg annotations
verify that precision propagates from the kfunc's mem__sz argument
back through the subprog frame to the caller's outgoing stack arg
store.
A companion BTF file (btf__stack_arg_precision.c) provides named
parameter BTF for the __naked subprog via __btf_func_path.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045148.2400087-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add inline-asm based verifier tests that exercise stack argument
validation logic directly.
Positive tests:
- subprog call with 6 arg's
- Two sequential calls to different subprogs (6-arg and 7-arg)
- Share a r11 store for both branches
Negative tests — verifier rejection:
- Read from uninitialized incoming stack arg slot
- Gap in outgoing slots: only r11-16 written, r11-8 missing
- Write at r11-80, exceeding max 7 stack args
- Missing store on one branch with a shared store
- First call has proper stack arguments and the second
call intends to inherit stack arguments but not working
- r11 load ordering issue
Negative tests — pointer/ref tracking:
- Pruning type mismatch: one branch stores PTR_TO_STACK, the
other stores a scalar, callee dereferences — must not prune
- Release invalidation: bpf_sk_release invalidates a socket
pointer stored in a stack arg slot
- Packet pointer invalidation: bpf_skb_pull_data invalidates
a packet pointer stored in a stack arg slot
- Null propagation: PTR_TO_MAP_VALUE_OR_NULL stored in stack
arg slot, null branch attempts dereference via callee
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045143.2399278-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When __naked subprogs are used in verifier tests, clang drops
parameter names from their BTF FUNC_PROTO entries. This prevents
the verifier from resolving stack argument slots by name.
Add a __btf_func_path(path) annotation that points to a separate
BTF file containing properly-named FUNC entries. The test_loader
matches FUNC entries by name, detects anonymous parameters, and
replaces the FUNC_PROTO with a new one that carries parameter
names from the custom file while preserving the original type IDs.
The custom BTF file also serves as btf_custom_path for kfunc
resolution when no separate btf_custom_path is specified.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045138.2398886-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add negative tests that verify the kfunc (rejecting kfunc call
with >8 byte struct as stack argument) and the verifier
(rejecting invalid uses of r11 for stack arguments).
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045132.2398371-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add x86_64 JIT support for BPF functions and kfuncs with more than
5 arguments. The extra arguments are passed through a stack area
addressed by register r11 (BPF_REG_PARAMS) in BPF bytecode,
which the JIT translates to native code.
The JIT follows the x86-64 calling convention for both BPF-to-BPF
and kfunc calls:
- Arg 6 is passed in the R9 register
- Args 7+ are passed on the stack
Incoming arg 6 (BPF r11+8) is translated to a MOV from R9 rather
than a memory load. Incoming args 7+ (BPF r11+16, r11+24, ...) map
directly to [rbp + 16], [rbp + 24], ..., matching the x86-64 stack
layout after CALL + PUSH RBP, so no offset adjustment is needed.
tail_call_reachable is rejected by the verifier and priv_stack is
disabled by the JIT when stack args exist, so R9 is always
available. When BPF bytecode writes to the arg-6 stack slot
(offset -8), the JIT emits a MOV into R9 instead of a memory store.
Outgoing args 7+ are placed at [rsp] in a pre-allocated area below
callee-saved registers, using:
native_off = outgoing_arg_base - outgoing_rsp - bpf_off - 16
The native x86_64 stack layout with stack arguments:
high address
+-------------------------+
| incoming stack arg N | [rbp + 16 + (N-7)*8] (from caller)
| ... |
| incoming stack arg 7 | [rbp + 16]
+-------------------------+
| return address | [rbp + 8]
| saved rbp | [rbp]
+-------------------------+
| BPF program stack | (round_up(stack_depth, 8) bytes)
+-------------------------+
| callee-saved regs | (r12, rbx, r13, r14, r15 as needed)
+-------------------------+
| outgoing arg M | [rsp + (M-7)*8]
| ... |
| outgoing arg 7 | [rsp]
+-------------------------+ rsp
low address
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045122.2393118-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Other architectures like arm64, riscv, etc. have enough register
and for them private stack can be used together with
stack arguments.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045114.2392291-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tail calls are deprecated and will be replaced by indirect calls
in the future. Reject programs that combine tail calls with stack
arguments rather than adding complexity for a deprecated feature.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045109.2392108-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the stack argument mechanism to kfunc calls, allowing kfuncs
with more than 5 parameters to receive additional arguments via the
r11-based stack arg area.
For kfuncs, the caller is a BPF program and the callee is a kernel
function. The BPF program writes outgoing args at negative r11
offsets, following the same convention as BPF-to-BPF calls:
Outgoing: r11 - 8 (arg6), ..., r11 - N*8 (last arg)
The following is an example:
int foo(int a1, int a2, int a3, int a4, int a5, int a6, int a7) {
...
kfunc1(a1, a2, a3, a4, a5, a6, a7, a8);
...
kfunc2(a1, a2, a3, a4, a5, a6, a7, a8, a9);
...
}
Caller (foo), generated by llvm
===============================
Incoming (positive offsets):
r11+8: [incoming arg 6]
r11+16: [incoming arg 7]
Outgoing for kfunc1 (negative offsets):
r11-8: [outgoing arg 6]
r11-16: [outgoing arg 7]
r11-24: [outgoing arg 8]
Outgoing for kfunc2 (negative offsets):
r11-8: [outgoing arg 6]
r11-16: [outgoing arg 7]
r11-24: [outgoing arg 8]
r11-32: [outgoing arg 9]
Later JIT will marshal outgoing arguments to the native calling
convention for kfunc1() and kfunc2().
For kfunc calls where stack args are used as constant or size
parameters, a mark_stack_arg_precision() helper is used to propagate
precision and do proper backtracking.
There are two places where meta->release_regno needs to keep
regno for later releasing the reference. Also, 'cur_aux(env)->arg_prog = regno'
is also keeping regno for later fixup. Since stack arguments don't have a valid
register number (regno is negative), these three cases are rejected for now
if the argument is on the stack.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045104.2391543-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_REG_PARAMS (r11) is used for stack argument accesses and
the following are only insns with r11 presence:
- load incoming stack arg
- store register to outgoing stack arg
- store immediate to outgoing stack arg
The detailed insn format can be found in is_stack_arg_ldx/st/stx()
helpers. After this patch, stack arg ldx/st/stx insns become valid
for kernel and these insns can be properly checked by verifier.
The LLVM compiler [1] implemented the above BPF_REG_PARAMS insns.
[1] https://github.com/llvm/llvm-project/pull/189060
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045059.2391192-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bpf_jit_supports_stack_args() as a weak function defaulting to
false. Architectures that implement JIT support for stack arguments
override it to return true.
Reject BPF functions with more than 5 parameters at verification
time if the architecture does not support stack arguments.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045054.2390945-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The interpreter does not understand the bpf register r11
(BPF_REG_PARAMS) used for stack arguments. So reject interpreter
usage if stack arguments are used either in the main program or
any subprogram.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045049.2390444-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_REG_PARAMS (R11) is at index MAX_BPF_REG, which is beyond the
register tracking arrays in const_fold.c and liveness.c. Handle it
explicitly to avoid out-of-bounds accesses.
Extend the arg tracking dataflow to cover stack arg slots. Otherwise,
pointers passed through stack args are invisible to liveness, causing
the pointed-to stack slots to be incorrectly poisoned.
Extend the at_out tracking array to MAX_AT_TRACK_REGS (registers
plus stack arg slots) so that outgoing stack arg stores are tracked
alongside registers. Add a separate at_stack_arg_entry array in
compute_subprog_args(), passed to arg_track_xfer(), to restore
FP-derived values on incoming stack arg reads.
Extend record_call_access() to check stack arg slots for FP-derived
pointers at kfunc call sites, reusing the record_arg_access() helper
extracted in the previous patch. Pass stack arg state from caller to
callee in analyze_subprog() so that callees can track pointers received
through stack args, hence avoid poisoning.
Skip stack arg instructions in record_load_store_access(). Stack arg
STX uses dst_reg=BPF_REG_PARAMS (index 11), but at[11] is repurposed
to track the value stored in stack arg slot 0. Without the skip, if a
prior stack arg STX stored an FP-derived pointer (e.g., fp-64) into
slot 0, a subsequent stack arg STX would read that FP-derived value as
the base pointer and spuriously mark a regular stack slot (e.g., fp-72
from -64 + -8) as accessed in the liveness bitmap.
Extend arg_track_log() to log state transitions for outgoing stack arg
slots at indices MAX_BPF_REG through MAX_AT_TRACK_REGS-1. Without this,
changes to at_out[11..17] caused by stack arg store instructions are
silently omitted from BPF_LOG_LEVEL2 output. For example, when a
caller passes fp-64 through a stack argument:
subprog#0:
10: (bf) r6 = r10
11: (07) r6 += -64
12: (7b) *(u64 *)(r11 -8) = r6
sa0: none -> fp0-64
13: (85) call pc+5
Without the fix, the "sa0: none -> fp0-64" transition at insn 12
would not appear.
Extend print_subprog_arg_access() to include stack arg slots in the
per-instruction FP-derived state dump. For example:
subprog#0:
12: (7b) *(u64 *)(r11 - 8) = r6 // r6=fp0-64
13: (85) call pc+5 // r6=fp0-64 sa0=fp0-64
Without the fix, the "sa0=fp0-64" annotation at insn 13 would not
appear, making it harder to debug liveness analysis for programs
that pass FP-derived pointers through stack arguments.
Extend has_fp_args() to also check stack arg slots for FP-derived
pointers, so that callees receiving pointers only through stack args
are still recursively analyzed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045043.2389049-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace "frame != ARG_NONE" with arg_is_fp() in has_fp_args().
The function's purpose is to check whether any argument is derived
from a frame pointer, which is exactly what arg_is_fp() tests
(frame >= 0 || frame == ARG_IMPRECISE). Using the dedicated
predicate is clearer and more consistent with the rest of the file.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045035.2388671-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract the per-argument FP-derived pointer handling from
record_call_access() into a new record_arg_access() helper.
The existing loop body — checking arg_is_fp, querying stack access
bytes, and calling record_stack_access/record_imprecise — will be
reused for stack argument slots in the next patch. Factoring it out
now avoids duplicating the logic.
No functional change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045030.2388067-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the precision marking and backtracking infrastructure to
support stack argument slots (r11-based accesses). Without this,
precision demands for scalar values passed through stack arguments
are silently dropped, which could allow the verifier to incorrectly
prune states with different constant values in stack arg slots.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045025.2387526-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move stack slot index (spi) and frame number out of the flags field
in bpf_jmp_history_entry into dedicated bitfields. This simplifies
the encoding and makes room for new flags.
Previously, spi and frame were packed into the lower 9 bits of the
12-bit flags field (3 bits frame + 6 bits spi), with INSN_F_STACK_ACCESS
at BIT(9) and INSN_F_DST/SRC_REG_STACK at BIT(10)/BIT(11).
But this has no room for an INSN_F_* flag for stack arguments.
To resolve this issue, bpf_jmp_history_entry field idx is narrowed to
20 bits (sufficient for insn indices up to 1M), and the freed bits hold
spi (6 bits) and frame (3 bits) as dedicated struct fields. The flags
enum is simplified accordingly:
INSN_F_STACK_ACCESS -> BIT(0)
INSN_F_DST_REG_STACK -> BIT(1)
INSN_F_SRC_REG_STACK -> BIT(2)
which allows more room for additional INSN_F_* flags.
bpf_push_jmp_history() now takes explicit spi and frame parameters
instead of encoding them into flags. The insn_stack_access_flags(),
insn_stack_access_spi(), and insn_stack_access_frameno() helpers are
removed.
No functional change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045020.2385962-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently BPF functions (subprogs) are limited to 5 register arguments.
With [1], the compiler can emit code that passes additional arguments
via a dedicated stack area through bpf register BPF_REG_PARAMS (r11),
introduced in an earlier patch ([2]).
The compiler uses positive r11 offsets for incoming (callee-side) args
and negative r11 offsets for outgoing (caller-side) args, following the
x86_64/arm64 calling convention direction. There is an 8-byte gap at
offset 0 separating two regions:
Incoming (callee reads): r11+8 (arg6), r11+16 (arg7), ...
Outgoing (caller writes): r11-8 (arg6), r11-16 (arg7), ...
The following is an example to show how stack arguments are saved
and transferred between caller and callee:
int foo(int a1, int a2, int a3, int a4, int a5, int a6, int a7) {
...
bar(a1, a2, a3, a4, a5, a6, a7, a8);
...
}
Caller (foo) Callee (bar)
============ ============
Incoming (positive offsets): Incoming (positive offsets):
r11+8: [incoming arg 6] r11+8: [incoming arg 6] <-+
r11+16: [incoming arg 7] r11+16: [incoming arg 7] <-|+
r11+24: [incoming arg 8] <-||+
Outgoing (negative offsets): |||
r11-8: [outgoing arg 6 to bar] -------->-------------------------+||
r11-16: [outgoing arg 7 to bar] -------->--------------------------+|
r11-24: [outgoing arg 8 to bar] -------->---------------------------+
If the bpf function has more than one call:
int foo(int a1, int a2, int a3, int a4, int a5, int a6, int a7) {
...
bar1(a1, a2, a3, a4, a5, a6, a7, a8);
...
bar2(a1, a2, a3, a4, a5, a6, a7, a8, a9);
...
}
Caller (foo) Callee (bar2)
============ ==============
Incoming (positive offsets): Incoming (positive offsets):
r11+8: [incoming arg 6] r11+8: [incoming arg 6] <+
r11+16: [incoming arg 7] r11+16: [incoming arg 7] <|+
r11+24: [incoming arg 8] <||+
Outgoing for bar2 (negative offsets): r11+32: [incoming arg 9] <|||+
r11-8: [outgoing arg 6] ---->----------->-------------------------+|||
r11-16: [outgoing arg 7] ---->----------->--------------------------+||
r11-24: [outgoing arg 8] ---->----------->---------------------------+|
r11-32: [outgoing arg 9] ---->----------->----------------------------+
The verifier tracks outgoing stack arguments in stack_arg_regs[] and
out_stack_arg_cnt in bpf_func_state, separately from the regular
r10 stack. The callee does not copy incoming args — it reads them
directly from the caller's outgoing slots at positive r11 offsets.
Similar to stacksafe(), introduce stack_arg_safe() to do pruning
check.
Outgoing stack arg slots are invalidated when the callee returns
(e.g. in prepare_func_exit), not at call time. This allows the callee to
read incoming args from the caller's outgoing slots during
verification. The following are a few examples.
Example 1:
*(u64 *)(r11 - 8) = r6;
*(u64 *)(r11 - 16) = r7;
call bar1; // arg6 = r6, arg7 = r7
call bar2; // expected with 2 stack arguments, failed
Example 2:
To fix the Example 1:
*(u64 *)(r11 - 8) = r6;
*(u64 *)(r11 - 16) = r7;
call bar1; // arg6 = r6, arg7 = r7
*(u64 *)(r11 - 8) = r8;
*(u64 *)(r11 - 16) = r9;
call bar2; // arg6 = r8, arg7 = r9
Example 3:
The compiler can hoist the shared stack arg stores above the branch:
*(u64 *)(r11 - 16) = r7;
if cond goto else;
*(u64 *)(r11 - 8) = r8;
call bar1; // arg6 = r8, arg7 = r7
goto end;
else:
*(u64 *)(r11 - 8) = r9;
call bar2; // arg6 = r9, arg7 = r7
end:
Example 4:
Within a loop:
loop:
*(u64 *)(r11 - 8) = r6; // arg6, before loop
call bar; // reuses arg6 each iteration
if ... goto loop;
A separate max_out_stack_arg_cnt field in bpf_subprog_info tracks
the deepest outgoing slot actually written. This intends to
reject programs that write to slots beyond what any callee expects.
It is necessary for JIT.
Similar to typical compiler generated code, enforce the following
orderings:
- all stack arg reads must be ahead of any stack arg write
- all stack arg reads must be before any bpf func, kfunc and helpers
This is needed as JIT may emit 'mov' insns for read/write with
the same register and bpf function, kfunc and helper will invalidate
all arguments immediately after the call.
Callback functions with stack arguments need kernel setup parameter
types (including stack parameters) properly and then callback function
can retrieve such information for verification purpose.
Global subprogs and freplace with >5 args are not yet supported.
[1] https://github.com/llvm/llvm-project/pull/189060
[2] https://lore.kernel.org/bpf/20260423033506.2542005-1-yonghong.song@linux.dev/
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045015.2385013-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>