Commit graph

1,319,026 commits

Author SHA1 Message Date
Mario Limonciello
66613b13cd ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case
[ Upstream commit e1bdbbc982 ]

acpi_register_lps0_dev() and acpi_unregister_lps0_dev() may be used
in drivers that don't require CONFIG_SUSPEND or compile on !X86.

Add prototypes for those cases.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502191627.fRgoBwcZ-lkp@intel.com/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250407183656.1503446-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:27 +01:00
Armin Wolf
b01a29a80c ACPI: bus: Bail out if acpi_kobj registration fails
[ Upstream commit 94a370fc8d ]

The ACPI sysfs code will fail to initialize if acpi_kobj is NULL,
together with some ACPI drivers.

Follow the other firmware subsystems and bail out if the kobject
cannot be registered.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250518185111.3560-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:27 +01:00
I Hsin Cheng
7fe1b9381b ASoC: intel/sdw_utils: Assign initial value in asoc_sdw_rt_amp_spk_rtd_init()
[ Upstream commit 5fb3878216 ]

Initialize "ret" with "-EINVAL" to handle cases where "strstr()" for
"codec_dai->component->name_prefix" doesn't find "-1" nor "-2". In that
case "name_prefix" is invalid because for current implementation it's
expected to have either "-1" or "-2" in it. (Maybe "-3", "-4" and so on
in the future.)

Link: https://scan5.scan.coverity.com/#/project-view/36179/10063?selectedIssue=1627120
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Link: https://patch.msgid.link/20250505185423.680608-1-richard120310@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:27 +01:00
Hector Martin
c0a6053f90 ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change
[ Upstream commit f529c91be8 ]

The ISENSE/VSENSE blocks are only powered up when the amplifier
transitions from shutdown to active. This means that if those controls
are flipped on while the amplifier is already playing back audio, they
will have no effect.

Fix this by forcing a power cycle around transitions in those controls.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-1-50a00ec850a3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:27 +01:00
Ahmed Salem
c05aba32a9 ACPICA: Avoid sequence overread in call to strncmp()
[ Upstream commit 64b9dfd077 ]

ACPICA commit 8b83a8d88dfec59ea147fad35fc6deea8859c58c

ap_get_table_length() checks if tables are valid by
calling ap_is_valid_header(). The latter then calls
ACPI_VALIDATE_RSDP_SIG(Table->Signature).

ap_is_valid_header() accepts struct acpi_table_header as an argument, so
the signature size is always fixed to 4 bytes.

The problem is when the string comparison is between ACPI-defined table
signature and ACPI_SIG_RSDP. Common ACPI table header specifies the
Signature field to be 4 bytes long[1], with the exception of the RSDP
structure whose signature is 8 bytes long "RSD PTR " (including the
trailing blank character)[2]. Calling strncmp(sig, rsdp_sig, 8) would
then result in a sequence overread[3] as sig would be smaller (4 bytes)
than the specified bound (8 bytes).

As a workaround, pass the bound conditionally based on the size of the
signature being passed.

Link: https://uefi.org/specs/ACPI/6.5_A/05_ACPI_Software_Programming_Model.html#system-description-table-header [1]
Link: https://uefi.org/specs/ACPI/6.5_A/05_ACPI_Software_Programming_Model.html#root-system-description-pointer-rsdp-structure [2]
Link: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstringop-overread [3]
Link: 8b83a8d8
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2248233.Mh6RI2rZIc@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:26 +01:00
Erick Shepherd
ddec63e2dd mmc: Add quirk to disable DDR50 tuning
[ Upstream commit 9510b38dc0 ]

Adds the MMC_QUIRK_NO_UHS_DDR50_TUNING quirk and updates
mmc_execute_tuning() to return 0 if that quirk is set. This fixes an
issue on certain Swissbit SD cards that do not support DDR50 tuning
where tuning requests caused I/O errors to be thrown.

Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250331221337.1414534-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:26 +01:00
Krzysztof Kozlowski
0cd0ef0a0a power: supply: collie: Fix wakeup source leaks on device unbind
[ Upstream commit c73d19f89c ]

Device can be unbound, so driver must also release memory for the wakeup
source.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202730.55096-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:26 +01:00
Guilherme G. Piccoli
7b45d2401d clocksource: Fix the CPUs' choice in the watchdog per CPU verification
[ Upstream commit 08d7becc1a ]

Right now, if the clocksource watchdog detects a clocksource skew, it might
perform a per CPU check, for example in the TSC case on x86.  In other
words: supposing TSC is detected as unstable by the clocksource watchdog
running at CPU1, as part of marking TSC unstable the kernel will also run a
check of TSC readings on some CPUs to be sure it is synced between them
all.

But that check happens only on some CPUs, not all of them; this choice is
based on the parameter "verify_n_cpus" and in some random cpumask
calculation. So, the watchdog runs such per CPU checks on up to
"verify_n_cpus" random CPUs among all online CPUs, with the risk of
repeating CPUs (that aren't double checked) in the cpumask random
calculation.

But if "verify_n_cpus" > num_online_cpus(), it should skip the random
calculation and just go ahead and check the clocksource sync between
all online CPUs, without the risk of skipping some CPUs due to
duplicity in the random cpumask calculation.

Tests in a 4 CPU laptop with TSC skew detected led to some cases of the per
CPU verification skipping some CPU even with verify_n_cpus=8, due to the
duplicity on random cpumask generation. Skipping the randomization when the
number of online CPUs is smaller than verify_n_cpus, solves that.

Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250323173857.372390-1-gpiccoli@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:26 +01:00
Talhah Peerbhai
6cd75d8f0b ASoC: amd: yc: Add quirk for Lenovo Yoga Pro 7 14ASP9
[ Upstream commit a28206060d ]

Similar to many other Lenovo models with AMD chips, the Lenovo
Yoga Pro 7 14ASP9 (product name 83HN) requires a specific quirk
to ensure internal mic detection. This patch adds a quirk fixing this.

Signed-off-by: Talhah Peerbhai <talhah.peerbhai@gmail.com>
Link: https://patch.msgid.link/20250515222741.144616-1-talhah.peerbhai@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:26 +01:00
Seunghun Han
76d3716815 ACPICA: fix acpi operand cache leak in dswstate.c
[ Upstream commit 156fd20a41 ]

ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732

I found an ACPI cache leak in ACPI early termination and boot continuing case.

When early termination occurs due to malicious ACPI table, Linux kernel
terminates ACPI function and continues to boot process. While kernel terminates
ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak.

Boot log of ACPI operand cache leak is as follows:
>[    0.585957] ACPI: Added _OSI(Module Device)
>[    0.587218] ACPI: Added _OSI(Processor Device)
>[    0.588530] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.589790] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.591534] ACPI Error: Illegal I/O port address/length above 64K: C806E00000004002/0x2 (20170303/hwvalid-155)
>[    0.594351] ACPI Exception: AE_LIMIT, Unable to initialize fixed events (20170303/evevent-88)
>[    0.597858] ACPI: Unable to start the ACPI Interpreter
>[    0.599162] ACPI Error: Could not remove SCI handler (20170303/evmisc-281)
>[    0.601836] kmem_cache_destroy Acpi-Operand: Slab cache still has objects
>[    0.603556] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26
>[    0.605159] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006
>[    0.609177] Call Trace:
>[    0.610063]  ? dump_stack+0x5c/0x81
>[    0.611118]  ? kmem_cache_destroy+0x1aa/0x1c0
>[    0.612632]  ? acpi_sleep_proc_init+0x27/0x27
>[    0.613906]  ? acpi_os_delete_cache+0xa/0x10
>[    0.617986]  ? acpi_ut_delete_caches+0x3f/0x7b
>[    0.619293]  ? acpi_terminate+0xa/0x14
>[    0.620394]  ? acpi_init+0x2af/0x34f
>[    0.621616]  ? __class_create+0x4c/0x80
>[    0.623412]  ? video_setup+0x7f/0x7f
>[    0.624585]  ? acpi_sleep_proc_init+0x27/0x27
>[    0.625861]  ? do_one_initcall+0x4e/0x1a0
>[    0.627513]  ? kernel_init_freeable+0x19e/0x21f
>[    0.628972]  ? rest_init+0x80/0x80
>[    0.630043]  ? kernel_init+0xa/0x100
>[    0.631084]  ? ret_from_fork+0x25/0x30
>[    0.633343] vgaarb: loaded
>[    0.635036] EDAC MC: Ver: 3.0.0
>[    0.638601] PCI: Probing PCI hardware
>[    0.639833] PCI host bridge to bus 0000:00
>[    0.641031] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
> ... Continue to boot and log is omitted ...

I analyzed this memory leak in detail and found acpi_ds_obj_stack_pop_and_
delete() function miscalculated the top of the stack. acpi_ds_obj_stack_push()
function uses walk_state->operand_index for start position of the top, but
acpi_ds_obj_stack_pop_and_delete() function considers index 0 for it.
Therefore, this causes acpi operand memory leak.

This cache leak causes a security threat because an old kernel (<= 4.9) shows
memory locations of kernel functions in stack dump. Some malicious users
could use this information to neutralize kernel ASLR.

I made a patch to fix ACPI operand cache leak.

Link: 987a3b5c
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4999480.31r3eYUQgx@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27 11:11:26 +01:00
David Lechner
0c81bcc14b iio: adc: ad7606_spi: fix reg write value mask
commit 89944d88f8 upstream.

Fix incorrect value mask for register write. Register values are 8-bit,
not 9. If this function was called with a value > 0xFF and an even addr,
it would cause writing to the next register.

Fixes: f2a22e1e17 ("iio: adc: ad7606: Add support for software mode for ad7616")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250428-iio-adc-ad7606_spi-fix-write-value-mask-v1-1-a2d5e85a809f@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:26 +01:00
Arthur-Prince
399e325f3f iio: adc: ti-ads1298: Kconfig: add kfifo dependency to fix module build
commit 3c5dfea39a upstream.

Add dependency to Kconfig’s ti-ads1298 because compiling it as a module
failed with an undefined kfifo symbol.

Fixes: 00ef7708fa ("iio: adc: ti-ads1298: Add driver")
Signed-off-by: Arthur-Prince <r2.arthur.prince@gmail.com>
Co-developed-by: Mariana Valério <mariana.valerio2@hotmail.com>
Signed-off-by: Mariana Valério <mariana.valerio2@hotmail.com>
Link: https://patch.msgid.link/20250430191131.120831-1-r2.arthur.prince@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:26 +01:00
David Lechner
aaa25db0b8 iio: adc: ad7944: mask high bits on direct read
commit 7cdfbc0113 upstream.

Apply a mask to the raw value received over the SPI bus for unsigned
direct reads. As we found recently, SPI controllers may not set unused
bits to 0 when reading with bits_per_word != {8,16,32}. The ad7944 uses
bits_per_word of 14 and 18, so we need to mask the value to be sure we
returning the correct value to userspace during a direct read.

Fixes: d1efcf8871 ("iio: adc: ad7944: add driver for AD7944/AD7985/AD7986")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-adc-ad7944-max-high-bits-on-direct-read-v1-1-b173facceefe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:26 +01:00
Sean Nyekjaer
ea66a9effa iio: imu: inv_icm42600: Fix temperature calculation
commit e2f8200142 upstream.

>From the documentation:
"offset to be added to <type>[Y]_raw prior toscaling by <type>[Y]_scale"
Offset should be applied before multiplying scale, so divide offset by
scale to make this correct.

Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250502-imu-v1-1-129b8391a4e3@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:26 +01:00
Jann Horn
034a52b5ef mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
commit 1013af4f58 upstream.

huge_pmd_unshare() drops a reference on a page table that may have
previously been shared across processes, potentially turning it into a
normal page table used in another process in which unrelated VMAs can
afterwards be installed.

If this happens in the middle of a concurrent gup_fast(), gup_fast() could
end up walking the page tables of another process.  While I don't see any
way in which that immediately leads to kernel memory corruption, it is
really weird and unexpected.

Fix it with an explicit broadcast IPI through tlb_remove_table_sync_one(),
just like we do in khugepaged when removing page tables for a THP
collapse.

Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-2-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-2-f4136f5ec58a@google.com
Fixes: 39dde65c99 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:26 +01:00
Thomas Zimmermann
acbe1597e3 dummycon: Trigger redraw when switching consoles with deferred takeover
commit 03bcbbb399 upstream.

Signal vt subsystem to redraw console when switching to dummycon
with deferred takeover enabled. Makes the console switch to fbcon
and displays the available output.

With deferred takeover enabled, dummycon acts as the placeholder
until the first output to the console happens. At that point, fbcon
takes over. If the output happens while dummycon is not active, it
cannot inform fbcon. This is the case if the vt subsystem runs in
graphics mode.

A typical graphical boot starts plymouth, a display manager and a
compositor; all while leaving out dummycon. Switching to a text-mode
console leaves the console with dummycon even if a getty terminal
has been started.

Returning true from dummycon's con_switch helper signals the vt
subsystem to redraw the screen. If there's output available dummycon's
con_putc{s} helpers trigger deferred takeover of fbcon, which sets a
display mode and displays the output. If no output is available,
dummycon remains active.

v2:
- make the comment slightly more verbose (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Andrei Borzenkov <arvidjaar@gmail.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1242191
Tested-by: Andrei Borzenkov <arvidjaar@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 83d83bebf4 ("console/fbcon: Add support for deferred console takeover")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://lore.kernel.org/r/20250520071418.8462-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:26 +01:00
Jacek Lawrynowicz
de72e0a13e accel/ivpu: Fix warning in ivpu_gem_bo_free()
commit 91274fd4ed upstream.

Don't WARN if imported buffers are in use in ivpu_gem_bo_free() as they
can be indeed used in the original context/driver.

Fixes: 647371a660 ("accel/ivpu: Add GEM buffer object management")
Cc: stable@vger.kernel.org # v6.3
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250528171220.513225-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Jacek Lawrynowicz
d2551a6178 accel/ivpu: Use dma_resv_lock() instead of a custom mutex
commit 98d3f772ca upstream.

This fixes a potential race conditions in:
 - ivpu_bo_unbind_locked() where we modified the shmem->sgt without
   holding the dma_resv_lock().
 - ivpu_bo_print_info() where we read the shmem->pages without
   holding the dma_resv_lock().

Using dma_resv_lock() also protects against future syncronisation
issues that may arise when accessing drm_gem_shmem_object or
drm_gem_object members.

Fixes: 42328003ec ("accel/ivpu: Refactor BO creation functions")
Cc: stable@vger.kernel.org # v6.9+
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250528154325.500684-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Jacek Lawrynowicz
954b190106 accel/ivpu: Use firmware names from upstream repo
commit 1c2c0e29f2 upstream.

Use FW names from linux-firmware repo instead of deprecated ones.
The vpu_37xx.bin style names were never released and were only used for
internal testing, so it is safe to remove them.

Fixes: c140244f0c ("accel/ivpu: Add initial Panther Lake support")
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250506092030.280276-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Jacek Lawrynowicz
648f1d5446 accel/ivpu: Improve buffer object logging
commit a01e93ee44 upstream.

- Fix missing alloc log when drm_gem_handle_create() fails in
  drm_vma_node_allow() and open callback is not called
- Add ivpu_bo->ctx_id that enables to log the actual context
  id instead of using 0 as default
- Add couple WARNs and errors so we can catch more memory
  corruption issues

Fixes: 37dee2a2f4 ("accel/ivpu: Improve buffer object debug logs")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250506091303.262034-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Sean Nyekjaer
2facd42665 iio: accel: fxls8962af: Fix temperature scan element sign
commit 9c78317b42 upstream.

Mark the temperature element signed, data read from the TEMP_OUT register
is in two's complement format.
This will avoid the temperature being mishandled and miss displayed.

Fixes: a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250505-fxls-v4-2-a38652e21738@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Diederik de Haas
ae3c418764 PCI: dw-rockchip: Fix PHY function call sequence in rockchip_pcie_phy_deinit()
commit 286ed198b8 upstream.

The documentation for the phy_power_off() function explicitly says that it
must be called before phy_exit().

Hence, follow the same rule in rockchip_pcie_phy_deinit().

Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
[mani: commit message change]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org	# v5.15+
Link: https://patch.msgid.link/20250417142138.1377451-1-didi.debian@cknow.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Shawn Lin
0835fbe0d1 PCI: dw-rockchip: Remove PCIE_L0S_ENTRY check from rockchip_pcie_link_up()
commit 7d9b5d6115 upstream.

rockchip_pcie_link_up() currently has two issues:
1. Value 0x11 of PCIE_L0S_ENTRY corresponds to L0 state, not L0S. So the
naming is wrong from the very beginning.
2. Checking for value 0x11 treats other states like L0S and L1 as link
down, which is wrong.

Hence, remove the PCIE_L0S_ENTRY check and also its definition. This allows
adding ASPM support in the successive commits.

Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/1744850111-236269-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Ilpo Järvinen
be0cf75cbd PCI: Fix lock symmetry in pci_slot_unlock()
commit f3efb9569b upstream.

The commit a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
made the lock function to call depend on dev->subordinate but left
pci_slot_unlock() unmodified creating locking asymmetry compared with
pci_slot_lock().

Because of the asymmetric lock handling, the same bridge device is unlocked
twice. First pci_bus_unlock() unlocks bus->self and then pci_slot_unlock()
will unconditionally unlock the same bridge device.

Move pci_dev_unlock() inside an else branch to match the logic in
pci_slot_lock().

Fixes: a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250505115412.37628-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Huacai Chen
b20701d594 PCI: Add ACS quirk for Loongson PCIe
commit 1f3303aa92 upstream.

Loongson PCIe Root Ports don't advertise an ACS capability, but they do not
allow peer-to-peer transactions between Root Ports. Add an ACS quirk so
each Root Port can be in a separate IOMMU group.

Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250403040756.720409-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Niklas Cassel
68e58f5791 PCI: dwc: ep: Correct PBA offset in .set_msix() callback
commit 810276362b upstream.

While dw_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.

This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:

  failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align

Fix the calculation of PBA offset in the MSI-X capability.

[bhelgaas: more specific subject and commit log]

Fixes: 83153d9f36 ("PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250514074313.283156-9-cassel@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Niklas Cassel
523815857b PCI: cadence-ep: Correct PBA offset in .set_msix() callback
commit c8bcb01352 upstream.

While cdns_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.

This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:

  failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align

Fix the calculation of PBA offset in the MSI-X capability.

[bhelgaas: more specific subject and commit log]

Fixes: 3ef5d16f50 ("PCI: cadence: Add MSI-X support to Endpoint driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250514074313.283156-10-cassel@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Long Li
bf1299797c uio_hv_generic: Align ring size to system page
commit 0315fef2af upstream.

Following the ring header, the ring data should align to system page
boundary. Adjust the size if necessary.

Cc: stable@vger.kernel.org
Fixes: 95096f2fbd ("uio-hv-generic: new userspace i/o driver for VMBus")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1746492997-4599-4-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1746492997-4599-4-git-send-email-longli@linuxonhyperv.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:25 +01:00
Long Li
157b0827d7 uio_hv_generic: Use correct size for interrupt and monitor pages
commit c951ab8fd3 upstream.

Interrupt and monitor pages should be in Hyper-V page size (4k bytes).
This can be different from the system page size.

This size is read and used by the user-mode program to determine the
mapped data region. An example of such user-mode program is the VMBus
driver in DPDK.

Cc: stable@vger.kernel.org
Fixes: 95096f2fbd ("uio-hv-generic: new userspace i/o driver for VMBus")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1746492997-4599-3-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1746492997-4599-3-git-send-email-longli@linuxonhyperv.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Long Li
704cd2f207 Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
commit 09eea7ad0b upstream.

There are use cases that interrupt and monitor pages are mapped to
user-mode through UIO, so they need to be system page aligned. Some
Hyper-V allocation APIs introduced earlier broke those requirements.

Fix this by using page allocation functions directly for interrupt
and monitor pages.

Cc: stable@vger.kernel.org
Fixes: ca48739e59 ("Drivers: hv: vmbus: Move Hyper-V page allocator to arch neutral code")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1746492997-4599-2-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1746492997-4599-2-git-send-email-longli@linuxonhyperv.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Ruben Devos
a9e916fa5c smb: client: add NULL check in automount_fullpath
commit f1e7a277a1 upstream.

page is checked for null in __build_path_from_dentry_optional_prefix
when tcon->origin_fullpath is not set. However, the check is missing when
it is set.
Add a check to prevent a potential NULL pointer dereference.

Signed-off-by: Ruben Devos <devosruben6@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Shyam Prasad N
dba032110b cifs: dns resolution is needed only for primary channel
commit b4f60a053a upstream.

When calling cifs_reconnect, before the connection to the
server is reestablished, the code today does a DNS resolution and
updates server->dstaddr.

However, this is not necessary for secondary channels. Secondary
channels use the interface list returned by the server to decide
which address to connect to. And that happens after tcon is reconnected
and server interfaces are requested.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Shyam Prasad N
e2328267d0 cifs: update dstaddr whenever channel iface is updated
commit c184689399 upstream.

When the server interface info changes (more common in clustered
servers like Azure Files), the per-channel iface gets updated.
However, this did not update the corresponding dstaddr. As a result
these channels will still connect (or try connecting) to older addresses.

Fixes: b54034a73b ("cifs: during reconnect, update interface if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Shyam Prasad N
180079e4da cifs: reset connections for all channels when reconnect requested
commit 1f396b9bfe upstream.

cifs_reconnect can be called with a flag to mark the session as needing
reconnect too. When this is done, we expect the connections of all
channels to be reconnected too, which is not happening today.

Without doing this, we have seen bad things happen when primary and
secondary channels are connected to different servers (in case of cloud
services like Azure Files SMB).

This change would force all connections to reconnect as well, not just
the sessions and tcons.

Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Beleswar Padhi
30b031c0bd remoteproc: k3-m4: Don't assert reset in detach routine
commit 2353252459 upstream.

The rproc_detach() function invokes __rproc_detach() before
rproc_unprepare_device(). The __rproc_detach() function sets the
rproc->state to "RPROC_DETACHED".

However, the TI K3 M4 driver erroneously looks for "RPROC_ATTACHED"
state in its .unprepare ops to identify IPC-only mode; which leads to
resetting the rproc in detach routine.

Therefore, correct the IPC-only mode detection logic to look for
"RPROC_DETACHED" in k3_m4_rproc_unprepare() function.

Fixes: ebcf9008a8 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Hari Nagalla <hnagalla@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250513054510.3439842-5-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Xiaolei Wang
f4ef928ca5 remoteproc: core: Release rproc->clean_table after rproc_attach() fails
commit bcd241230f upstream.

When rproc->state = RPROC_DETACHED is attached to remote processor
through rproc_attach(), if rproc_handle_resources() returns failure,
then the clean table should be released, otherwise the following
memory leak will occur.

unreferenced object 0xffff000086a99800 (size 1024):
comm "kworker/u12:3", pid 59, jiffies 4294893670 (age 121.140s)
hex dump (first 32 bytes):
00 00 00 00 00 80 00 00 00 00 00 00 00 00 10 00 ............
00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 ............
backtrace:
 [<000000008bbe4ca8>] slab_post_alloc_hook+0x98/0x3fc
 [<000000003b8a272b>] __kmem_cache_alloc_node+0x13c/0x230
 [<000000007a507c51>] __kmalloc_node_track_caller+0x5c/0x260
 [<0000000037818dae>] kmemdup+0x34/0x60
 [<00000000610f7f57>] rproc_boot+0x35c/0x56c
 [<0000000065f8871a>] rproc_add+0x124/0x17c
 [<00000000497416ee>] imx_rproc_probe+0x4ec/0x5d4
 [<000000003bcaa37d>] platform_probe+0x68/0xd8
 [<00000000771577f9>] really_probe+0x110/0x27c
 [<00000000531fea59>] __driver_probe_device+0x78/0x12c
 [<0000000080036a04>] driver_probe_device+0x3c/0x118
 [<000000007e0bddcb>] __device_attach_driver+0xb8/0xf8
 [<000000000cf1fa33>] bus_for_each_drv+0x84/0xe4
 [<000000001a53b53e>] __device_attach+0xfc/0x18c
 [<00000000d1a2a32c>] device_initial_probe+0x14/0x20
 [<00000000d8f8b7ae>] bus_probe_device+0xb0/0xb4
 unreferenced object 0xffff0000864c9690 (size 16):

Fixes: 9dc9507f18 ("remoteproc: Properly deal with the resource table when detaching")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250430092043.1819308-3-xiaolei.wang@windriver.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Xiaolei Wang
92776ca0cc remoteproc: core: Cleanup acquired resources when rproc_handle_resources() fails in rproc_attach()
commit 7692c9fbed upstream.

When rproc->state = RPROC_DETACHED and rproc_attach() is used
to attach to the remote processor, if rproc_handle_resources()
returns a failure, the resources allocated by imx_rproc_prepare()
should be released, otherwise the following memory leak will occur.

Since almost the same thing is done in imx_rproc_prepare() and
rproc_resource_cleanup(), Function rproc_resource_cleanup() is able
to deal with empty lists so it is better to fix the "goto" statements
in rproc_attach(). replace the "unprepare_device" goto statement with
"clean_up_resources" and get rid of the "unprepare_device" label.

unreferenced object 0xffff0000861c5d00 (size 128):
comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............
backtrace:
 [<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c
 [<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0
 [<00000000521c0345>] kmalloc_trace+0x40/0x158
 [<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8
 [<000000002815755e>] imx_rproc_prepare+0xe0/0x180
 [<0000000003f61b4e>] rproc_boot+0x2ec/0x528
 [<00000000e7e994ac>] rproc_add+0x124/0x17c
 [<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4
 [<00000000efc298a1>] platform_probe+0x68/0xd8
 [<00000000110be6fe>] really_probe+0x110/0x27c
 [<00000000e245c0ae>] __driver_probe_device+0x78/0x12c
 [<00000000f61f6f5e>] driver_probe_device+0x3c/0x118
 [<00000000a7874938>] __device_attach_driver+0xb8/0xf8
 [<0000000065319e69>] bus_for_each_drv+0x84/0xe4
 [<00000000db3eb243>] __device_attach+0xfc/0x18c
 [<0000000072e4e1a4>] device_initial_probe+0x14/0x20

Fixes: 10a3d4079e ("remoteproc: imx_rproc: move memory parsing to rproc_ops")
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250430092043.1819308-2-xiaolei.wang@windriver.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Wentao Liang
20462b6111 regulator: max14577: Add error check for max14577_read_reg()
commit 65271f868c upstream.

The function max14577_reg_get_current_limit() calls the function
max14577_read_reg(), but does not check its return value. A proper
implementation can be found in max14577_get_online().

Add a error check for the max14577_read_reg() and return error code
if the function fails.

Fixes: b0902bbeb7 ("regulator: max14577: Add regulator driver for Maxim 14577")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250526025627.407-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
André Almeida
ec5f0b4412 ovl: Fix nested backing file paths
commit 924577e4f6 upstream.

When the lowerdir of an overlayfs is a merged directory of another
overlayfs, ovl_open_realfile() will fail to open the real file and point
to a lower dentry copy, without the proper parent path. After this,
d_path() will then display the path incorrectly as if the file is placed
in the root directory.

This bug can be triggered with the following setup:

 mkdir -p ovl-A/lower ovl-A/upper ovl-A/merge ovl-A/work
 mkdir -p ovl-B/upper ovl-B/merge ovl-B/work

 cp /bin/cat ovl-A/lower/

 mount -t overlay overlay -o \
 lowerdir=ovl-A/lower,upperdir=ovl-A/upper,workdir=ovl-A/work \
 ovl-A/merge

 mount -t overlay overlay -o \
 lowerdir=ovl-A/merge,upperdir=ovl-B/upper,workdir=ovl-B/work \
 ovl-B/merge

 ovl-A/merge/cat /proc/self/maps | grep --color cat
 ovl-B/merge/cat /proc/self/maps | grep --color cat

The first cat will correctly show `/ovl-A/merge/cat`, while the second
one shows just `/cat`.

To fix that, uses file_user_path() inside of backing_file_open() to get
the correct file path for the dentry.

Co-developed-by: John Schoenick <johns@valvesoftware.com>
Signed-off-by: John Schoenick <johns@valvesoftware.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Fixes: def3ae83da ("fs: store real path instead of fake path in backing file f_path")
Cc: <stable@vger.kernel.org> # v6.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Khem Raj
6dbda47fe8 mips: Add -std= flag specified in KBUILD_CFLAGS to vdso CFLAGS
commit 0f4ae7c6ec upstream.

GCC 15 changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, mips/vdso code uses
its own CFLAGS without a '-std=' value, which break with this dialect
change because of the kernel's own definitions of bool, false, and true
conflicting with the C23 reserved keywords.

  include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
     11 |         false   = 0,
        |         ^~~~~
  include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
  include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
     35 | typedef _Bool                   bool;
        |                                 ^~~~
  include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards

Add -std as specified in KBUILD_CFLAGS to the decompressor and purgatory
CFLAGS to eliminate these errors and make the C standard version of these
areas match the rest of the kernel.

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:24 +01:00
Gabriel Shahrouzi
bf1605e2ea staging: iio: ad5933: Correct settling cycles encoding per datasheet
commit 60638e2a2d upstream.

The AD5933 datasheet (Table 13) lists the maximum cycles to be 0x7FC
(2044).

Clamp the user input to the maximum effective value of 0x7FC cycles.

Fixes: f94aa354d6 ("iio: impedance-analyzer: New driver for AD5933/4 Impedance Converter, Network Analyzer")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250420013009.847851-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
David Lechner
4df6f2a167 pwm: axi-pwmgen: fix missing separate external clock
commit a8841dc3df upstream.

Add proper support for external clock to the AXI PWM generator driver.

In most cases, the HDL for this IP block is compiled with the default
ASYNC_CLK_EN=1. With this option, there is a separate external clock
that drives the PWM output separate from the peripheral clock. So the
driver should be enabling the "axi" clock to power the peripheral and
the "ext" clock to drive the PWM output.

When ASYNC_CLK_EN=0, the "axi" clock is also used to drive the PWM
output and there is no "ext" clock.

Previously, if there was a separate external clock, users had to specify
only the external clock and (incorrectly) omit the AXI clock in order
to get the correct operating frequency for the PWM output.

The devicetree bindings are updated to fix this shortcoming and this
patch changes the driver to match the new bindings. To preserve
compatibility with any existing dtbs that specify only one clock, we
don't require the clock name on the first clock.

Fixes: 41814fe5c7 ("pwm: Add driver for AXI PWM generator")
Cc: stable@vger.kernel.org
Acked-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250529-pwm-axi-pwmgen-add-external-clock-v3-3-5d8809a7da91@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
Thomas Zimmermann
5c70e3ad85 video: screen_info: Relocate framebuffers behind PCI bridges
commit 2f29b5c231 upstream.

Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes
invalid access to I/O memory.

Resources behind a PCI host bridge can be relocated by a certain offset
in the kernel's CPU address range used for I/O. The framebuffer memory
range stored in screen_info refers to the CPU addresses as seen during
boot (where the offset is 0). During boot up, firmware may assign a
different memory offset to the PCI host bridge and thereby relocating
the framebuffer address of the PCI graphics device as seen by the kernel.
The information in screen_info must be updated as well.

The helper pcibios_bus_to_resource() performs the relocation of the
screen_info's framebuffer resource (given in PCI bus addresses). The
result matches the I/O-memory resource of the PCI graphics device (given
in CPU addresses). As before, we store away the information necessary to
later update the information in screen_info itself.

Commit 78aa89d1df ("firmware/sysfb: Update screen_info for relocated
EFI framebuffers") added the code for updating screen_info. It is based
on similar functionality that pre-existed in efifb. Efifb uses a pointer
to the PCI resource, while the newer code does a memcpy of the region.
Hence efifb sees any updates to the PCI resource and avoids the issue.

v3:
- Only use struct pci_bus_region for PCI bus addresses (Bjorn)
- Clarify address semantics in commit messages and comments (Bjorn)
v2:
- Fixed tags (Takashi, Ivan)
- Updated information on efifb

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reported-by: "Ivan T. Ivanov" <iivanov@suse.de>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1240696
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Fixes: 78aa89d1df ("firmware/sysfb: Update screen_info for relocated EFI framebuffers")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Link: https://lore.kernel.org/r/20250528080234.7380-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
Thomas Zimmermann
337bf0bbb0 sysfb: Fix screen_info type check for VGA
commit f670b50ef5 upstream.

Use the helper screen_info_video_type() to get the framebuffer
type from struct screen_info. Handle supported values in sorted
switch statement.

Reading orig_video_isVGA is unreliable. On most systems it is a
VIDEO_TYPE_ constant. On some systems with VGA it is simply set
to 1 to signal the presence of a VGA output. See vga_probe() for
an example. Retrieving the screen_info type with the helper
screen_info_video_type() detects these cases and returns the
appropriate VIDEO_TYPE_ constant. For VGA, sysfb creates a device
named "vga-framebuffer".

The sysfb code has been taken from vga16fb, where it likely didn't
work correctly either. With this bugfix applied, vga16fb loads for
compatible vga-framebuffer devices.

Fixes: 0db5b61e0d ("fbdev/vga16fb: Create EGA/VGA devices in sysfb code")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "Uwe Kleine-König" <u.kleine-koenig@baylibre.com>
Cc: Zsolt Kajtar <soci@c64.rulez.org>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250603154838.401882-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
Lorenzo Stoakes
ce4ef0274c KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
commit 15ac613f12 upstream.

The enum type prot_type declared in arch/s390/kvm/gaccess.c declares an
unfortunate identifier within it - PROT_NONE.

This clashes with the protection bit define from the uapi for mmap()
declared in include/uapi/asm-generic/mman-common.h, which is indeed what
those casually reading this code would assume this to refer to.

This means that any changes which subsequently alter headers in any way
which results in the uapi header being imported here will cause build
errors.

Resolve the issue by renaming PROT_NONE to PROT_TYPE_DUMMY.

Link: https://lkml.kernel.org/r/20250519145657.178365-1-lorenzo.stoakes@oracle.com
Fixes: b3cefd6bf1 ("KVM: s390: Pass initialized arg even if unused")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Ignacio Moreno Gonzalez <Ignacio.MorenoGonzalez@kuka.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505140943.IgHDa9s7-lkp@intel.com/
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Ignacio Moreno Gonzalez <Ignacio.MorenoGonzalez@kuka.com>
Acked-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
Qasim Ijaz
4da7fcc098 net: ch9200: fix uninitialised access during mii_nway_restart
commit 9ad0452c02 upstream.

In mii_nway_restart() the code attempts to call
mii->mdio_read which is ch9200_mdio_read(). ch9200_mdio_read()
utilises a local buffer called "buff", which is initialised
with control_read(). However "buff" is conditionally
initialised inside control_read():

        if (err == size) {
                memcpy(data, buf, size);
        }

If the condition of "err == size" is not met, then
"buff" remains uninitialised. Once this happens the
uninitialised "buff" is accessed and returned during
ch9200_mdio_read():

        return (buff[0] | buff[1] << 8);

The problem stems from the fact that ch9200_mdio_read()
ignores the return value of control_read(), leading to
uinit-access of "buff".

To fix this we should check the return value of
control_read() and return early on error.

Reported-by: syzbot <syzbot+3361c2d6f78a3e0892f9@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=3361c2d6f78a3e0892f9
Tested-by: syzbot <syzbot+3361c2d6f78a3e0892f9@syzkaller.appspotmail.com>
Fixes: 4a476bd6d1 ("usbnet: New driver for QinHeng CH9200 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250526183607.66527-1-qasdev00@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
Xu Yang
5572d21a72 phy: fsl-imx8mq-usb: fix phy_tx_vboost_level_from_property()
commit b15ee09ddb upstream.

The description of TX_VBOOST_LVL is wrong in register PHY_CTRL3
bit[31:29].

The updated description as below:
  011: Corresponds to a launch amplitude of 0.844 V.
  100: Corresponds to a launch amplitude of 1.008 V.
  101: Corresponds to a launch amplitude of 1.156 V.

This will fix the parsing function
phy_tx_vboost_level_from_property() to return correct value.

Fixes: 63c85ad0cd ("phy: fsl-imx8mp-usb: add support for phy tuning")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250430094502.2723983-3-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
Mikulas Patocka
f2986bccf2 dm: lock limits when reading them
commit abb4cf2f4c upstream.

Lock queue limits when reading them, so that we don't read halfway
modified values.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
Ye Bin
8e89c17dc8 ftrace: Fix UAF when lookup kallsym after ftrace disabled
commit f914b52c37 upstream.

The following issue happens with a buggy module:

BUG: unable to handle page fault for address: ffffffffc05d0218
PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
RIP: 0010:sized_strscpy+0x81/0x2f0
RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000
RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d
RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68
R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038
R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff
FS:  00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ftrace_mod_get_kallsym+0x1ac/0x590
 update_iter_mod+0x239/0x5b0
 s_next+0x5b/0xa0
 seq_read_iter+0x8c9/0x1070
 seq_read+0x249/0x3b0
 proc_reg_read+0x1b0/0x280
 vfs_read+0x17f/0x920
 ksys_read+0xf3/0x1c0
 do_syscall_64+0x5f/0x2e0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

The above issue may happen as follows:
(1) Add kprobe tracepoint;
(2) insmod test.ko;
(3)  Module triggers ftrace disabled;
(4) rmmod test.ko;
(5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed;
ftrace_mod_get_kallsym()
...
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
...

The problem is when a module triggers an issue with ftrace and
sets ftrace_disable. The ftrace_disable is set when an anomaly is
discovered and to prevent any more damage, ftrace stops all text
modification. The issue that happened was that the ftrace_disable stops
more than just the text modification.

When a module is loaded, its init functions can also be traced. Because
kallsyms deletes the init functions after a module has loaded, ftrace
saves them when the module is loaded and function tracing is enabled. This
allows the output of the function trace to show the init function names
instead of just their raw memory addresses.

When a module is removed, ftrace_release_mod() is called, and if
ftrace_disable is set, it just returns without doing anything more. The
problem here is that it leaves the mod_list still around and if kallsyms
is called, it will call into this code and access the module memory that
has already been freed as it will return:

  strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);

Where the "mod" no longer exists and triggers a UAF bug.

Link: https://lore.kernel.org/all/20250523135452.626d8dcd@gandalf.local.home/

Cc: stable@vger.kernel.org
Fixes: aba4b5c22c ("ftrace: Save module init functions kallsyms symbols for tracing")
Link: https://lore.kernel.org/20250529111955.2349189-2-yebin@huaweicloud.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00
Md Sadre Alam
d6bf5ad1a5 mtd: rawnand: qcom: Fix read len for onfi param page
commit e6031b1154 upstream.

The minimum size to fetch the data from device to QPIC buffer
is 512-bytes. If size is less than 512-bytes the data will not be
protected by ECC as per QPIC standard. So while reading onfi parameter
page from NAND device set nandc->buf_count = 512.

Cc: stable@vger.kernel.org
Fixes: 89550beb09 ("mtd: rawnand: qcom: Implement exec_op()")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27 11:11:23 +01:00