As part of the TX queue selection for af_iucv skbs,
qeth_l3_get_cast_type_rcu() ends up calling qeth_get_ether_cast_type().
Which is rather fragile, since such skbs don't have a proper ETH header
and we rely on it being zeroed out in the right places. Add a separate
case for ETH_P_AF_IUCV instead that does the right thing.
When later building the HW header for such skbs, don't hard-code the
cast type but follow the same path as for other protocol types. Here
the cast type should naturally come from the skb's queue mapping.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qeth_l3_hard_start_xmit() already determined the skb's proto. Avoid
doing so a second time when it calls qeth_l3_get_cast_type().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace our home-grown helper with the more robust vlan_get_protocol().
This is pretty much a 1:1 replacement, we just need to pass around a
proper ETH_P_* everyhwere and convert the old value range.
For readability also convert the protocol checks in
qeth_l3_hard_start_xmit() to a switch statement.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have two usage patterns:
1. get & ->setup() a new discipline, or
2. ->remove() & put the currently loaded one.
Add corresponding helpers that hide the internals & error handling.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
This commits stops building oprofile for powerpc and removes any
reference to it from directories in arch/powerpc/ apart from
arch/powerpc/oprofile, which will be removed in the next commit (this is
broken into two commits as the size of the commit became very big, ~5k
lines).
Note that the member "oprofile_cpu_type" in "struct cpu_spec" isn't
removed as it was also used by other parts of the code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Alex Elder says:
====================
net: ipa: hardware pipeline cleanup fixes
There is a procedure currently referred to as a "tag process" that
is performed to clear the IPA hardware pipeline--either at the time
of a modem crash, or when suspending modem GSI channels.
One thing done in this procedure is issuing a command that sends a
data packet originating from the AP->command TX endpoint, destined
for the AP<-LAN RX (default) endpoint. And although we currently
wait for the send to complete, we do *not* wait for the packet to be
received. But the pipeline can't be assumed clear until we have
actually received this packet.
This series addresses this by detecting when the pipeline-clearing
packet has been received, and using a completion to allow a waiter
to know when that has happened. This uses the IPA status capability
(which sends an extra status buffer for certain packets). It also
uses the ability to supply a "tag" with a packet, which will be
delivered with the packet's status buffer. We tag the data packet
that's sent to clear the pipeline, and use the receipt of a status
buffer associated with a tagged packet to determine when that packet
has arrived.
"Tag status" just desribes one aspect of this procedure, so some
symbols are renamed to be more like "pipeline clear" so they better
describe the larger purpose. Finally, two functions used in this
code don't use their arguments, so those arguments are removed.
====================
Link: https://lore.kernel.org/r/20210126185703.29087-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only time we transfer data (rather than issuing a command) out
of the AP->command TX endpoint is when we're clearing the hardware
pipeline. All that's needed is a "small" data buffer, and its
contents aren't even important.
For convenience, we just transfer a command structure in this case
(it's already mapped for DMA). The TRE is added to a transaction
using ipa_cmd_ip_tag_status_add(), but we ignore the size value
provided to that function. So just get rid of the size argument.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We only send a tagged packet from the AP->command TX endpoint when
we're clearing the hardware pipeline. And when we receive the
tagged packet we don't care what the actual tag value is.
Stop passing a tag value to ipa_cmd_ip_tag_status_add(), and just
encode 0 as the tag sent. Fix the function that encodes the tag so
it uses the proper byte ordering.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are times, such as when the modem crashes, when we issue
commands to clear the IPA hardware pipeline. These commands include
a data transfer command that delivers a small packet directly to the
default (AP<-LAN RX) endpoint.
The places that do this wait for the transactions that contain these
commands to complete, but the pipeline can't be assumed clear until
the sent packet has been *received*.
The small transfer will be delivered with a status structure, and
that status will indicate its tag is valid. This is the only place
we send a tagged packet, so we use the tag to determine when the
pipeline clear packet has arrived.
Add a completion to the IPA structure to to be used to signal
the receipt of a pipeline clear packet. Create a new function
ipa_cmd_pipeline_clear_wait() that will wait for that completion.
Reinitialize the completion whenever pipeline clear commands are
added to a transaction. Extend ipa_endpoint_status_tag() to check
whether a packet whose status contains a valid tag was sent from the
AP->command TX endpoint, and if so, signal the new IPA completion.
Have all callers of ipa_cmd_pipeline_clear_add() wait for the
pipeline clear indication after the transaction that clears the
pipeline has completed.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce ipa_endpoint_status_tag(), which returns true if received
status indicates its tag field is valid. The endpoint parameter is
not yet used.
Call this from ipa_status_drop_packet(), and drop the packet if the
status indicates the tag was valid. Pass the endpoint pointer to
ipa_status_drop_packet(), and rename it ipa_endpoint_status_drop().
The endpoint will be used in the next patch.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rearrange some comments and assignments made when handling a packet
that is received with status, aiming to improve understandability.
Use DIV_ROUND_CLOSEST() to get a better per-packet true size estimate.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a set of functions and symbols related to performing
"tag_process" immediate commands to clear the IPA pipeline. The
name is related to one of the commands issued when doing this, but
it doesn't really convey the overall purpose of taking this action.
The purpose is to take some steps to "clear out" the hardware
pipeline, and to wait until that process completes, to ensure the
IPA hardware is in a well-defined state.
Rename these symbols to use "pipeline_clear" in their names instead.
Add some comments to explain a bit more about what's going on.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current layout of net_device is not optimal for cacheline usage.
The member adj_list.lower linked list is split between cacheline 2 and 3.
The ifindex is placed together with stats (struct net_device_stats),
although most modern drivers don't update this stats member.
The members netdev_ops, mtu and hard_header_len are placed on three
different cachelines. These members are accessed for XDP redirect into
devmap, which were noticeably with perf tool. When not using the map
redirect variant (like TC-BPF does), then ifindex is also used, which is
placed on a separate fourth cacheline. These members are also accessed
during forwarding with regular network stack. The members priv_flags and
flags are on fast-path for network stack transmit path in __dev_queue_xmit
(currently located together with mtu cacheline).
This patch creates a read mostly cacheline, with the purpose of keeping the
above mentioned members on the same cacheline.
Some netdev_features_t members also becomes part of this cacheline, which is
on purpose, as function netif_skb_features() is on fast-path via
validate_xmit_skb().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/161168277983.410784.12401225493601624417.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new mount API requires additional changes to how DFS
is handled. Additional testing of DFS uncovered problems
with domain based DFS referrals (a follow on patch addresses
DFS links) which this patch addresses.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
of UID translations to occur, in some configurations, when setting v3
namespaced file capabilities.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEKvuQkp28KvPJn/fVfL7QslYSS/0FAmATYfMRHGNvZGVAdHlo
aWNrcy5jb20ACgkQfL7QslYSS/2Gsg//SoR/VpEn3FfsRs/niAsPAmOi0i9m0zxD
rMZ7M12GAQFo9B2AaBhttUejcLzBuIM6DIpRUYyP9QBoSONPvmNy2l58tD3xd97k
ZXkGqOwG65q20zRTWiS2x3u271SwmCiZJzC7xIYUH36ZLWySfYLuI0QD8HqYdfD1
iNdDiYCzkilRG0PuaPIFtfq4OL/NizeBdBwJR2F5PJQdixocVsmdJKO+lTw5A8PJ
EefMC8lgV5pg+nVHlERXr9bg5BXaxRhE4hqwDPD7qB91piA8j7CxNIdagmjw5d7p
KOLYO4Ek3wKJY1MGMJ/hBNXQIBxMJX7DBEFUi1y/+Eiw3QUr9XUkQiqe6nYLALPa
m0IOKQJOkcuZLd5cCACnfv6XTu8iAabpilwUIi6TnADwzByc0jaIjypIbkVulScH
YMGE+HO9X0jzMfpWMG/FopHVuGb5t6zdIukfb/Ndo6tIbEZx+cr+uZ3HEB86mMLw
diJVXDGtdRGZRz5seN6mVRuGUFL/Xlg/wEhq60hxxrBstW7yvMGkjII0AowH3Sri
pCXXq6W/t2MA1sJKfSp33v3vFeG98y77aDO0Djh3G7cg4XLCiAxQkQu3RO1Vm9wi
U5Q3Hd2Cmaxw/NG7tnG5R79wAEBoGW7LeRCAYsjcs6O1pmpn9krn9vSfXyhOAKz4
d1ukk31djsg=
=G4uE
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull ecryptfs fix from Tyler Hicks:
"Fix a regression that resulted in two rounds of UID translations when
setting v3 namespaced file capabilities in some configurations"
* tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: fix uid translation for setxattr on security.capability
TX/RX descriptor ring fields are always little-endian, but conversion
wasn't performed for big-endian CPUs, so the driver failed to work.
This patch makes the driver work on big-endian CPUs. It was tested and
confirmed to work on NXP P1010 processor (PowerPC).
Signed-off-by: Alexey Denisov <rtgbnm@gmail.com>
Link: https://lore.kernel.org/r/20210128044859.280219-1-rtgbnm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass through mode is to allow packets in MAP format to be passed
on to the stack. rmnet driver can be used to process and demultiplex
these packets.
Pass through mode can be enabled when the device is in raw ip mode only.
Conversely, raw ip mode cannot be disabled when pass through mode is
enabled.
Userspace can use pass through mode in conjunction with rmnet driver
through the following steps-
1. Enable raw ip mode on qmi_wwan device
2. Enable pass through mode on qmi_wwan device
3. Create a rmnet device with qmi_wwan device as real device using netlink
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/1611560015-20034-1-git-send-email-subashab@codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniele Palmas says:
====================
net: usb: qmi_wwan: new mux_id sysfs file
this patch series add a sysfs file to let userspace know which mux
id has been used to create a qmimux network interface.
I'm aware that adding new sysfs files is not usually the right path,
but my understanding is that this piece of information can't be
retrieved in any other way and its absence restricts how
userspace application (e.g. like libqmi) can take advantage of the
qmimux implementation in qmi_wwan.
====================
Link: https://lore.kernel.org/r/20210127153433.12237-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add qmimux interface sysfs file qmap/mux_id to show qmap id set
during the interface creation, in order to provide a method for
userspace to associate QMI control channels to network interfaces.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change fixes the checkpatch warning described in this commit
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Cleanup output to use __func__ over explicit function strings.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210124190804.1964580-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* drm/vc4: Fix LBM size calculation; Fix high resolutions for hvs5
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmARHGsACgkQaA3BHVML
eiMwGgf+O+MQgxYdG9Y7HT1Wr9lrQAgbMCyo6HNK9TZvjN0eGJgZuE2FQ1v/jp9S
2zbgZl0tum6ZJ/bRQgObpTZqg0VD2sxx3tNsGHOD2xjYM0bs4yegftXnh/1pS6BM
/ny9PgjPAjK0cbZGmSWEsPIC0X7KsTmlvb1ym794znSUqFkR9JLU2IxKDqV6mlD5
jcQ8yn0QnxAmYmXWQzP74IPkN2LcehhdMGt8qVKhLtwkCgxcWTNIg4f47zzBoRd0
vc4iP4dpRpxf3g/6aLjc2F65KqF5iUhZE3g8A7FYhB02lnueC0nhc/uTNgRgg1ft
5XZFfxNv06F4nXBWNmhOte7Ep3Zg0Q==
=AFpd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull (less than what git shortlog provides):
* drm/vc4: Fix LBM size calculation; Fix high resolutions for hvs5
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YBEco1Vxeny8U/ca@linux-uq9g
!perfmon_capable() is checked before the last switch(func_id) in
bpf_base_func_proto. Thus, the cases BPF_FUNC_trace_printk and
BPF_FUNC_snprintf_btf can be moved to that last switch(func_id) to omit
the inline !perfmon_capable() checks.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210127174615.3038-1-tklauser@distanz.ch
drivers/net/can/dev.c
b552766c87 ("can: dev: prevent potential information leak in can_fill_info()")
3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
0a042c6ec9 ("can: dev: move netlink related code into seperate file")
Code move.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
57ac4a31c4 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
214baf2287 ("net/mlx5e: Support HTB offload")
Adjacent code changes
net/switchdev/switchdev.c
20776b465c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
ffb68fc58e ("net: switchdev: remove the transaction structure from port object notifiers")
bae33f2b5a ("net: switchdev: remove the transaction structure from port attributes")
Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on a locked socket.
Note that we could remove the switch for prog->expected_attach_type altogether
since all current sock_addr attach types are covered. However, it makes sense
to keep it as a safe-guard in case new sock_addr attach types are added that
might not operate on a locked socket. Therefore, avoid to let this slip through.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210127232853.3753823-5-sdf@google.com
Can be used to query/modify socket state for unconnected UDP sendmsg.
Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on
a locked socket.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210127232853.3753823-2-sdf@google.com
While we do handle the additional cursor sizes introduced in NVE4, it looks
like we accidentally broke this when converting over to use Nvidia's
display headers. Since we now use NVVAL in dispnv50/head907d.c in order to
format the value for the cursor layout and NVD9 only had one byte reserved
vs. the 2 bytes reserved in later generations, we end up accidentally
stripping the second bit in the cursor layout format parameter - causing us
to set the wrong cursor size.
This fixes that by adding our own curs_set hook for 917d which uses the
NV917D headers.
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ed0b86a90b ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Nvidia hardware doesn't actually support using tiling formats with the
cursor plane, only linear is allowed. In the future, we should write a
testcase for this.
Fixes: c586f30bf7 ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Cc: James Jones <jajones@nvidia.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes a crash when trying to create a channel on e.g. Turing GPUs when
NOUVEAU_SVM_INIT was called before.
Fixes: eeaf06ac1a ("drm/nouveau/svm: initial support for shared virtual memory")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit f844eb485e introduced a regression for
NV50, which lead to visual artifacts, tearing and eventual crashes.
In the changes of f844eb485e only the first line
was correctly translated to the new NVIDIA header macros:
- PUSH_NVSQ(push, NV827C, 0x0110, 0,
- 0x0114, 0);
+ PUSH_MTHD(push, NV827C, SET_PROCESSING,
+ NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE));
The lower part ("0x0114, 0") was probably omitted by accident.
This patch restores the push of the missing data and fixes the regression.
Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de>
Fixes: f844eb485e ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Parav Pandit Says:
=================
This patchset introduces support for mlx5 subfunction (SF).
A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.
When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.
A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.
A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.
Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.
Patch summary:
--------------
Patch 1 to 4 prepares devlink
patch 5 to 7 mlx5 adds SF device support
Patch 8 to 11 mlx5 adds SF devlink port support
Patch 12 and 14 adds documentation
Patch-1 prepares code to handle multiple port function attributes
Patch-2 introduces devlink pcisf port flavour similar to pcipf and pcivf
Patch-3 adds port add and delete driver callbacks
Patch-4 adds port function state get and set callbacks
Patch-5 mlx5 vhca event notifier support to distribute subfunction
state change notification
Patch-6 adds SF auxiliary device
Patch-7 adds SF auxiliary driver
Patch-8 prepares eswitch to handler SF vport
Patch-9 adds eswitch helpers to add/remove SF vport
Patch-10 implements devlink port add/del callbacks
Patch-11 implements devlink port function get/set callbacks
Patch-12 to 14 adds documentation
Patch-12 added mlx5 port function documentation
Patch-13 adds subfunction documentation
Patch-14 adds mlx5 subfunction documentation
Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.
overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.
A subfunction can be configured using devlink port function attribute
before its activated.
When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.
example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88
Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active
Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4
$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff
$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112
After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive
Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88
[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2
=================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmALKDwACgkQSD+KveBX
+j7qjQf6A1moPhhIlXROCzaJUjlAj2U291LWBveU+I6na6fjYjAAWHYwfv0YKQpo
Qb0NRt+9abgEpGidc4hOwIJKhK+vlWrQuehRt83aAfAwaN3OEeGuNllniWo821Hj
sNiJfSC/DslOlQSxKLsAs3Fduy/sV3GN9Zv7hEwOFgEr5QvB2c6H1XiypVP2Ecsd
ZXC3SuEWxIoRtfXEkTkJne9LNoiDChlvT1FR/z75h8HUBdAOjzBTQzBbM+8M4Msw
8aKUPya3FMRAPWsOgPhkpU0xTtH2Mi7MC9TlwiWmrK4Q3uvesIav8pVf7r3GNAZA
sipIZ4gP0M5SiCaZa8rIBpTXBHxmvg==
=jEG4
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 subfunction support
Parav Pandit says:
This patchset introduces support for mlx5 subfunction (SF).
A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.
When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.
A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.
A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.
Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.
Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.
overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.
A subfunction can be configured using devlink port function attribute
before its activated.
When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.
example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88
Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active
Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4
$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff
$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112
After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive
Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88
[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2
=================
* tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Add devlink subfunction port documentation
devlink: Extend devlink port documentation for subfunctions
devlink: Add devlink port documentation
net/mlx5: SF, Port function state change support
net/mlx5: SF, Add port add delete functionality
net/mlx5: E-switch, Add eswitch helpers for SF vport
net/mlx5: E-switch, Prepare eswitch to handle SF vport
net/mlx5: SF, Add auxiliary device driver
net/mlx5: SF, Add auxiliary device support
net/mlx5: Introduce vhca state event notifier
devlink: Support get and set state of port function
devlink: Support add and delete devlink port
devlink: Introduce PCI SF port flavour and port attribute
devlink: Prepare code to fill multiple port function attributes
====================
Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dealing with BPF/BTF/pahole and DWARF v5 I wanted to build bpftool.
While looking into the source code I found duplicate assignments in misc tools
for the LLVM eco system, e.g. clang and llvm-objcopy.
Move the Clang, LLC and/or LLVM utils definitions to tools/scripts/Makefile.include
file and add missing includes where needed. Honestly, I was inspired by the commit
c8a950d0d3 ("tools: Factor HOSTCC, HOSTLD, HOSTAR definitions").
I tested with bpftool and perf on Debian/testing AMD64 and LLVM/Clang v11.1.0-rc1.
Build instructions:
[ make and make-options ]
MAKE="make V=1"
MAKE_OPTS="HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang LD=ld.lld LLVM=1 LLVM_IAS=1"
MAKE_OPTS="$MAKE_OPTS PAHOLE=/opt/pahole/bin/pahole"
[ clean-up ]
$MAKE $MAKE_OPTS -C tools/ clean
[ bpftool ]
$MAKE $MAKE_OPTS -C tools/bpf/bpftool/
[ perf ]
PYTHON=python3 $MAKE $MAKE_OPTS -C tools/perf/
I was careful with respecting the user's wish to override custom compiler, linker,
GNU/binutils and/or LLVM utils settings.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com> # tools/build and tools/perf
Link: https://lore.kernel.org/bpf/20210128015117.20515-1-sedat.dilek@gmail.com
What 84965ff8a8 ("io_uring: if we see flush on exit, cancel related tasks")
really wants is to cancel all relevant REQ_F_INFLIGHT requests reliably.
That can be achieved by io_uring_cancel_files(), but we'll miss it
calling io_uring_cancel_task_requests(files=NULL) from io_uring_flush(),
because it will go through __io_uring_cancel_task_requests().
Just always call io_uring_cancel_files() during cancel, it's good enough
for now.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ABS_PRESSURE and ABS_MT_PRESSURE on touch devices usually represent
contact size (as a finger flattens with higher pressure the contact size
increases) and userspace translates the kernel pressure value back into
contact size. For example, libinput has pressure thresholds when a touch is
considered a palm (palm == large contact area -> high pressure). The values
themselves are on an arbitrary scale and device-specific.
On pressurepads however, the pressure axis may represent the real physical
pressure. Pressurepads are touchpads without a hinge but an actual pressure
sensor underneath the device instead, for example the Lenovo Yoga 9i.
A high-enough pressure is converted to a button click by the firmware.
Microsoft does not require a pressure axis to be present, see [1], so as seen
from userspace most pressurepads are identical to clickpads - one button and
INPUT_PROP_BUTTONPAD set.
However, pressurepads that export the pressure axis break userspace because
that axis no longer represents contact size, resulting in inconsistent touch
tracking, e.g. [2]. Userspace needs to know when a pressure axis represents
real pressure and the best way to do so is to define what the resolution
field means. Userspace can then treat data with a pressure resolution as
true pressure.
This patch documents that the pressure resolution is in units/gram. This
allows for fine-grained detail and tops out at roughly ~2000t, enough for the
devices we're dealing with. Grams is not a scientific pressure unit but the
alternative is:
- Pascal: defined as force per area and area is unreliable on many devices and
seems like the wrong option here anyway, especially for devices with a
single pressure sensor only.
- Newton: defined as mass * distance/acceleration and for the purposes of a
pressure axis, the distance is tricky to interpret and we get the data to
calculate acceleration from event timestamps anyway.
For the purposes of touch devices and digitizers, grams seems the best choice
and the easiest to interpret.
Bonus side effect: we can use the existing hwdb infrastructure in userspace to
fix devices that advertise false pressure.
[1] https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-precision-touchpad-required-hid-top-level-collections#windows-precision-touchpad-input-reports
[2] https://gitlab.freedesktop.org/libinput/libinput/-/issues/562
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20210112230310.GA149342@jelly
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
While DOC: section titles are not converted into RST headings
sections and are only decorated with strong emphasis markup,
nothing stops us from generating internal hyperlinks for them,
to mimic implicit hyperlinks to RST headings.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/20210118110813.1490-1-michal.wajdeczko@intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>