Commit graph

996,399 commits

Author SHA1 Message Date
Hoang Huu Le
2a9063b7ff tipc: remove duplicated code in tipc_msg_create
Remove a duplicate code checking for header size in tipc_msg_create() as
it's already being done in tipc_msg_init().

Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20210127025123.6390-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 18:50:07 -08:00
Stanislav Fomichev
8259fdeb30 selftests/bpf: Verify that rebinding to port < 1024 from BPF works
Return 3 to indicate that permission check for port 111
should be skipped.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210127193140.3170382-2-sdf@google.com
2021-01-27 18:18:15 -08:00
Stanislav Fomichev
772412176f bpf: Allow rewriting to ports under ip_unprivileged_port_start
At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port
to the privileged ones (< ip_unprivileged_port_start), but it will
be rejected later on in the __inet_bind or __inet6_bind.

Let's add another return value to indicate that CAP_NET_BIND_SERVICE
check should be ignored. Use the same idea as we currently use
in cgroup/egress where bit #1 indicates CN. Instead, for
cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should
be bypassed.

v5:
- rename flags to be less confusing (Andrey Ignatov)
- rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags
  and accept BPF_RET_SET_CN (no behavioral changes)

v4:
- Add missing IPv6 support (Martin KaFai Lau)

v3:
- Update description (Martin KaFai Lau)
- Fix capability restore in selftest (Martin KaFai Lau)

v2:
- Switch to explicit return code (Martin KaFai Lau)

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
2021-01-27 18:18:15 -08:00
Jiapeng Zhong
906ace80c2 hwmon: (pmbus) Simplify the calculation of variables
Fix the following coccicheck warnings:

./drivers/hwmon/pmbus/pmbus_core.c:1265:24-26: WARNING !A || A && B is
equivalent to !A || B.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611642100-29937-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:55:46 -08:00
Jakub Kicinski
0f764eec3e Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Honor stateful expressions defined in the set from the dynset
   extension. The set definition provides a stateful expression
   that must be used by the dynset expression in case it is specified.

2) Missing timeout extension in the set element in the dynset
   extension leads to inconsistent ruleset listing, not allowing
   the user to restore timeout and expiration on ruleset reload.

3) Do not dump the stateful expression from the dynset extension
   if it coming from the set definition.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nft_dynset: dump expressions when set definition contains no expressions
  netfilter: nft_dynset: add timeout extension to template
  netfilter: nft_dynset: honor stateful expressions in set definition
====================

Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:53:46 -08:00
Jakub Kicinski
45a8146481 linux-can-fixes-for-5.11-20210127
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmARMX4THG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCpyVqK+u3vqV4OB/9sAgySWtKO9ts6cWbhQ1q6W1QJ8IQ3
 QI7wB+9lTtBoGUdTx7o8vyfPQBTjYsnsmUo4/UBPlP7kg0YkezcxT+N5raQNDuF3
 cRTHKiqfydxGpwGiTCPP8WRxFqbkbXRiTEPoPonkOaPPMctetrQMGxuywaLgeHuP
 gv5nmDHkNzD3jZZiKtz0nKdK1KiJ2eqsutER7JSmotmZJH1NfE0Ba2HuwWxFvoj3
 uBLJnfg7pWUWIwLKW9CcF8T0AGijfzqUMnKTSNbLsdgqW+7LgosoznO4S6lUNGDu
 +G/8FOY2rcdf3A+LvhNzDEOpkga6aopq7g45qL9Faof8SSze67RqDK6n
 =3W1k
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-5.11-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-01-27

The patch is by Dan Carpenter and fixes a potential information leak in
can_fill_info().

* tag 'linux-can-fixes-for-5.11-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: dev: prevent potential information leak in can_fill_info()
====================

Link: https://lore.kernel.org/r/20210127094028.2778793-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:51:46 -08:00
Jakub Kicinski
b770753c7b MAINTAINERS: add missing header for bonding
include/net/bonding.h is missing from bonding entry.

Link: https://lore.kernel.org/r/20210127021844.4071706-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:50:20 -08:00
Jakub Kicinski
5ae3a25b32 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Anthony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-01-26

This series contains updates to the ice, i40e, and igc driver.

Henry corrects setting an unspecified protocol to IPPROTO_NONE instead of
0 for IPv6 flexbytes filters for ice.

Nick fixes the IPv6 extension header being processed incorrectly and
updates the netdev->dev_addr if it exists in hardware as it may have been
modified outside the ice driver.

Brett ensures a user cannot request more channels than available LAN MSI-X
and fixes the minimum allocation logic as it was incorrectly trying to use
more MSI-X than allocated for ice.

Stefan Assmann minimizes the delay between getting and using the VSI
pointer to prevent a possible crash for i40e.

Corinna Vinschen fixes link speed advertising for igc.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  igc: fix link speed advertising
  i40e: acquire VSI pointer only after VF is initialized
  ice: Fix MSI-X vector fallback logic
  ice: Don't allow more channels than LAN MSI-X available
  ice: update dev_addr in ice_set_mac_address even if HW filter exists
  ice: Implement flow for IPv6 next header (extension header)
  ice: fix FDir IPv6 flexbyte
====================

Link: https://lore.kernel.org/r/20210126221035.658124-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:44:52 -08:00
Dan Carpenter
cbfc6c6177 hwmon: (aht10) Unlock on error in aht10_read_values()
This error path needs to drop the lock before returning.

Fixes: afd018716398 ("hwmon: Add AHT10 Temperature and Humidity Sensor Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YBD5Ro549hMJSnW4@mwanda
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:19 -08:00
Uwe Kleine-König
86585c6197 hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups
pwm_apply_state() does what the legacy functions pwm_config() and
pwm_{en,dis}able() do in a single function call. This simplifies error
handling and is more efficient for new-style PWM hardware drivers.

Instead of repeatedly querying the PWM framework about the initial PWM
configuration, cache the settings in driver data.

Also use __set_pwm() in .probe() to have the algorithm calculating the PWM
state in a single place.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210112191314.124686-1-u.kleine-koenig@pengutronix.de
[groeck: Added missing empty line after declaration]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:19 -08:00
Johannes Cornelis Draaijer (datdenkikniet)
8c78f0dee4 hwmon: Add AHT10 Temperature and Humidity Sensor Driver
This patch adds a hwmon driver for the AHT10 Temperature and
Humidity sensor. It has a maximum sample rate, as the datasheet
states that the chip may heat up if it is sampled more than once
every two seconds.

Has been tested a to work on a raspberrypi0w

Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com>
Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop
[groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where
 appropriate; dropped change log]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Jiapeng Zhong
0bf6a1e85d hwmon: (applesmc) Assign boolean values to a bool variable
Fix the following coccicheck warnings:

./drivers/hwmon/applesmc.c:568:6-23: WARNING: Assignment of
0/1 to bool variable.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611124870-125658-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Blaž Hrastnik
bd433537fe hwmon: (nct6683) Support ASRock boards
Tested with ASRock X570 Phantom Gaming-ITX/TB3. It also appears
on other ASRock boards.

Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Link: https://lore.kernel.org/r/b08d641c-3fb5-4845-85f7-e1753149cd7d@www.fastmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Tian Tao
da75b22452 hwmon: (aspeed-pwm-tacho) Switch to using the new API kobj_to_dev()
fixed the following coccicheck:
drivers/hwmon/aspeed-pwm-tacho.c:634:60-61: WARNING opportunity for
kobj_to_dev()
drivers/hwmon/aspeed-pwm-tacho.c:623:60-61: WARNING opportunity for
kobj_to_dev()

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/1609725945-13895-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Tian Tao
f1fc688c65 hwmon: (max6650) Switch to using the new API kobj_to_dev()
Switch to using the new API kobj_to_dev() to fix the below warnning:
drivers/hwmon/max6650.c:324:60-61: WARNING opportunity for
kobj_to_dev().

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1609376621-46463-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Paul Barker
f0dc7cb6b4 hwmon: (pwm-fan) Support multiple fan tachometers
The pwm-fan driver is extended to support multiple fan tachometer
signals connected to GPIO inputs. This is intended to support the case
where a single PWM output signal is routed to multiple fans, each of
which have a tachometer output connected back to a GPIO pin.

The number of fan tachometer inputs is determined by the number of
interrupt sources configured for the pwm-fan device. The number of
pulses-per-revolution entries should match the number of interrupt
sources so that each input has a value assigned.

The fan tachometer measurements are exposed as sysfs files fan1_input,
fan2_input, etc up to the number of configured inputs.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Link: https://lore.kernel.org/r/20201212195008.6036-3-pbarker@konsulko.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Paul Barker
01695410d4 hwmon: (pwm-fan) Store tach data separately
The data for the (optional) fan tachometer input is moved to a separate
structure which is only allocated if an input is actually configured.

After this change the pulse IRQ handler takes a pointer to the
tachometer data structure instead of the whole device context.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Link: https://lore.kernel.org/r/20201212195008.6036-2-pbarker@konsulko.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Tian Tao
8bfc731e47 hwmon: (gpio-fan) Switch to using the new API kobj_to_dev()
fixed the following coccicheck:
drivers/hwmon/gpio-fan.c:302:60-61: WARNING opportunity for
kobj_to_dev()

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1609211837-54930-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Eddie James
f7a652182c hwmon: (pmbus/ibm-cffps) Set the PMBUS_NO_CAPABILITY flag
Several power supplies supported by the IBM CFFPS driver don't
report valid data in the CAPABILITY register. This results in PEC
being enabled when it's not supported by the device, and since
the automatic version detection might fail, disable use of the
CAPABILITY register across the board for this driver.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20201222152640.27749-3-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Eddie James
e5befc024c hwmon: (pmbus) Add a PMBUS_NO_CAPABILITY platform data flag
Some PMBus chips don't respond with valid data when reading the
CAPABILITY register. Add a flag that device drivers can set so
that the PMBus core driver doesn't use CAPABILITY to determine it's
behavior.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20201222152640.27749-2-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Gabriel Craciunescu
c8d0d3fa94 hwmon: (k10temp) Zen3 Ryzen Desktop CPUs support
The module has only support for Zen3 server CPUs right now.
Add support for Family 0x19, model 0x21 which are Zen3 Ryzen Desktop CPUs.
Tested on 5800x, 5900x and 5950x CPUs.

Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Link: https://lore.kernel.org/r/20201223005315.20077-1-nix.or.die@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Guenter Roeck
d349626b42 hwmon: (abx500) Decomission abx500 driver
This deletes the ABx500 hwmon driver, the only supported
variant being the AB8500.

This driver has been replaced by generic frameworks. By
inspecting the abx500 sysfs files we see that it contains
things such as temp1_max, temp1_max_alarm, temp1_max_hyst,
temp1_max_hyst_alarm, temp1_min, temp1_min_alarm.

It becomes obvious that the abx500.c is a reimplementation
of thermal zones. This is not very strange as the generic
thermal zones were not invented when this driver was merged
so people were rolling their own.

The ab8500.c driver contains conversion tables for handling
a thermistor on ADC channels AUX1 and AUX2.

I managed to replace the functionality of the driver with:

- Activation of the ntc_thermistor.c driver,
  CONFIG_SENSORS_NTC_THERMISTOR
- Activation of thermal zones, CONFIG_THERMAL
- In the device tree, connecting the NTC driver to the
  processed IIO channels from the AB8500 GPADC ADC forming
  two instances of NTC sensors.
- Connecting the two NTC sensors to a "chassis" thermal zone
  in the device tree and setting that to hit the CPU frequency
  at 50 degrees celsius and do a critical shutdown at 70
  degrees celsius, deploying a policy using the sensors.

After talking to the original authors we concluded that the
driver was never properly parameterized in production so
what we now have in the device tree is already puts the
thermistors to better use than what the hwmon driver did.

The two remaining channels for two battery temperatures is
already handled in the charging algorithms but can be
optionally extended to thermal zones as well if we want
these to trigger critical shutdown for the platform.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201221125521.768082-1-linus.walleij@linaro.org
[groeck: Removed documentation and fixed up Makefile, Kconfig]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Tian Tao
5707c8dbde hwmon: (w83627ehf) Switch to using the new API kobj_to_dev()
Switch to using the new API kobj_to_dev() to fix the below warnning:
drivers/hwmon/w83627ehf.c:1113:60-61: WARNING opportunity for
kobj_to_dev().

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1607907735-17510-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:17 -08:00
Tom Rix
87da1ed26c hwmon: (smsc47m1) Remove 'h' from printk format specifier
See Documentation/core-api/printk-formats.rst.
h should no longer be used in the format specifier for printk.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201215183237.2071770-1-trix@redhat.com
[groeck: Updated subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:17 -08:00
Zheng Yongjun
94c08e067a hwmon: (pc87360) convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201214133114.3516-1-zhengyongjun3@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:17 -08:00
Thomas Hebb
4008bc7d39 hwmon: (dell-smm) Add XPS 15 L502X to fan control blacklist
It has been reported[0] that the Dell XPS 15 L502X exhibits similar
freezing behavior to the other systems[1] on this blacklist. The issue
was exposed by a prior change of mine to automatically load
dell_smm_hwmon on a wider set of XPS models. To fix the regression, add
this model to the blacklist.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=211081
[1] https://bugzilla.kernel.org/show_bug.cgi?id=195751

Fixes: b8a13e5e8f ("hwmon: (dell-smm) Use one DMI match for all XPS models")
Cc: stable@vger.kernel.org
Reported-by: Bob Hepple <bob.hepple@gmail.com>
Tested-by: Bob Hepple <bob.hepple@gmail.com>
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/a09eea7616881d40d2db2fb5fa2770dc6166bdae.1611456351.git.tommyhebb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:00 -08:00
Jakub Kicinski
c7f3489bfc Merge branch 'net-bridge-multicast-per-port-eht-hosts-limit'
Nikolay Aleksandrov says:

====================
net: bridge: multicast: per-port EHT hosts limit

This set adds a simple configurable per-port EHT tracked hosts limit.
Patch 01 adds a default limit of 512 tracked hosts per-port, since the EHT
changes are still only in net-next that shouldn't be a problem. Then
patch 02 adds the ability to configure and retrieve the hosts limit
and to retrieve the current number of tracked hosts per port.
Let's be on the safe side and limit the number of tracked hosts by
default while allowing the user to increase that limit if needed.
====================

Link: https://lore.kernel.org/r/20210126093533.441338-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:40:37 -08:00
Nikolay Aleksandrov
2dba407f99 net: bridge: multicast: make tracked EHT hosts limit configurable
Add two new port attributes which make EHT hosts limit configurable and
export the current number of tracked EHT hosts:
 - IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT: configure/retrieve current limit
 - IFLA_BRPORT_MCAST_EHT_HOSTS_CNT: current number of tracked hosts
Setting IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT to 0 is currently not allowed.

Note that we have to increase RTNL_SLAVE_MAX_TYPE to 38 minimum, I've
increased it to 40 to have space for two more future entries.

v2: move br_multicast_eht_set_hosts_limit() to br_multicast_eht.c,
    no functional change

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:40:35 -08:00
Nikolay Aleksandrov
89268b056e net: bridge: multicast: add per-port EHT hosts limit
Add a default limit of 512 for number of tracked EHT hosts per-port.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:40:35 -08:00
Jiapeng Zhong
1d96006dcc rocker: Simplify the calculation of variables
Fix the following coccicheck warnings:

./drivers/net/ethernet/rocker/rocker_ofdpa.c:926:34-36: WARNING !A || A
&& B is equivalent to !A || B.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611648783-3916-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:35:48 -08:00
Vadim Fedorenko
3f96d64497 net: decnet: fix netdev refcount leaking on error path
On building the route there is an assumption that the destination
could be local. In this case loopback_dev is used to get the address.
If the address is still cannot be retrieved dn_route_output_slow
returns EADDRNOTAVAIL with loopback_dev reference taken.

Cannot find hash for the fixes tag because this code was introduced
long time ago. I don't think that this bug has ever fired but the
patch is done just to have a consistent code base.

Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611619334-20955-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:33:46 -08:00
Masahiro Yamada
864e898ba3 net: remove redundant 'depends on NET'
These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.

Remove 'depends on NET', which we know it is already met.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:04:12 -08:00
Masahiro Yamada
d32f834cd6 net: l3mdev: use obj-$(CONFIG_NET_L3_MASTER_DEV) form in net/Makefile
CONFIG_NET_L3_MASTER_DEV is a bool option. Change the ifeq conditional
to the standard obj-$(CONFIG_NET_L3_MASTER_DEV) form.

Use obj-y in net/l3mdev/Makefile because Kbuild visits this Makefile
only when CONFIG_NET_L3_MASTER_DEV=y.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-4-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:03:52 -08:00
Masahiro Yamada
0cfd99b487 net: switchdev: use obj-$(CONFIG_NET_SWITCHDEV) form in net/Makefile
CONFIG_NET_SWITCHDEV is a bool option. Change the ifeq conditional to
the standard obj-$(CONFIG_NET_SWITCHDEV) form.

Use obj-y in net/switchdev/Makefile because Kbuild visits this Makefile
only when CONFIG_NET_SWITCHDEV=y.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-3-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:03:52 -08:00
Masahiro Yamada
1e328ed559 net: dcb: use obj-$(CONFIG_DCB) form in net/Makefile
CONFIG_DCB is a bool option. Change the ifeq conditional to the
standard obj-$(CONFIG_DCB) form.

Use obj-y in net/dcb/Makefile because Kbuild visits this Makefile
only when CONFIG_DCB=y.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-2-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:03:52 -08:00
Masahiro Yamada
8b5f4eb3ab net: move CONFIG_NET guard to top Makefile
When CONFIG_NET is disabled, nothing under the net/ directory is
compiled. Move the CONFIG_NET guard to the top Makefile so the net/
directory is entirely skipped.

When Kbuild visits net/Makefile, CONFIG_NET is obvioulsy 'y' because
CONFIG_NET is a bool option. Clean up net/Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:03:52 -08:00
Masahiro Yamada
69783429cd net: sysctl: remove redundant #ifdef CONFIG_NET
CONFIG_NET is a bool option, and this file is compiled only when
CONFIG_NET=y.

Remove #ifdef CONFIG_NET, which we know it is always met.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231421.105936-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 17:02:43 -08:00
Jakub Kicinski
fd0e4ec4a7 Merge branch 'mptcp-ipv4-mapped-ipv6-addressing-for-subflows'
Mat Martineau says:

====================
MPTCP: IPv4-mapped IPv6 addressing for subflows

This patch series from the MPTCP tree adds support for IPv4-mapped IPv6
addressing that was missing when multiple subflows were first
implemented.

Patches 1 and 2 handle the conversion and comparison of the mapped
addresses.

Patch 3 contains a minor refactor in the path manager's handling of
addresses.

Patches 4 and 5 add selftests for the new functionality and adjust the
selftest timeout.
====================

Link: https://lore.kernel.org/r/20210125185904.6997-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:53:56 -08:00
Matthieu Baerts
9c2cadefde selftests: increase timeout to 10 min
On slow systems with kernel debug settings, we can reach the current
timeout when all tests are executed.

Likely some tests need be improved to remove some 'sleep' and wait
(less) for a specific action. This can also improve stability.

Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:53:55 -08:00
Geliang Tang
a609478803 selftests: mptcp: add IPv4-mapped IPv6 testcases
Here, we make sure we support IPv4-mapped in IPv6 addresses in different
contexts:

- a v4-mapped address is received by the PM and can be used as v4.
- a v4 address is received by the PM and can be used even with a v4
  mapped socket.

We also make sure we don't try to establish subflows between v4 and v6
addresses, e.g. if a real v6 address ends with a valid v4 address.

Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:53:55 -08:00
Matthieu Baerts
1f2f1931b2 mptcp: pm nl: reduce variable scope
To avoid confusions like when working on the previous patch, better to
declare and assign this variable only where it is needed.

Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:53:55 -08:00
Matthieu Baerts
7b9b0f7e12 mptcp: pm nl: support IPv4 mapped in v6 addresses
On one side, we can allow the creation of subflows between v4 mapped in
v6 and v4 addresses. For that we look for v4mapped addresses between the
local address we want to select and the remote one.

On the other side, we also properly deal with received v4mapped
addresses, either announced ones or set via Netlink.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/122
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:53:52 -08:00
Matthieu Baerts
50a13bc394 mptcp: support MPJoin with IPv4 mapped in v6 sk
With an IPv4 mapped in v6 socket, we were trying to call inet6_bind()
with an IPv4 address resulting in a -EINVAL error because the given
addr_len -- size of the address structure -- was too short.

We now make sure to use address structures for the same family as the
MPTCP socket for both the bind() and the connect(). It means we convert
v4 addresses to v4 mapped in v6 or the opposite if needed.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/122
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:53:47 -08:00
Heiner Kallweit
17ce76c498 r8169: remove not needed call to rtl_wol_enable_rx from rtl_shutdown
rtl_wol_enable_rx() is called via the following call chain if WoL
is enabled:
rtl8169_down()
-> rtl_prepare_power_down()
   -> rtl_wol_enable_rx()
Therefore we don't have to call this function here.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/34ce78e2-596c-e2ac-16aa-c550fa624c22@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:48:37 -08:00
Di Zhu
275b1e88ca pktgen: fix misuse of BUG_ON() in pktgen_thread_worker()
pktgen create threads for all online cpus and bond these threads to
relevant cpu repecivtily. when this thread firstly be woken up, it
will compare cpu currently running with the cpu specified at the time
of creation and if the two cpus are not equal, BUG_ON() will take effect
causing panic on the system.
Notice that these threads could be migrated to other cpus before start
running because of the cpu hotplug after these threads have created. so the
BUG_ON() used here seems unreasonable and we can replace it with WARN_ON()
to just printf a warning other than panic the system.

Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20210125124229.19334-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:46:37 -08:00
Rasmus Villemoes
20776b465c net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
It's not true that switchdev_port_obj_notify() only inspects the
->handled field of "struct switchdev_notifier_port_obj_info" if
call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON()
triggering for a non-zero return combined with ->handled not being
true. But the real problem here is that -EOPNOTSUPP is not being
properly handled.

The wrapper functions switchdev_handle_port_obj_add() et al change a
return value of -EOPNOTSUPP to 0, and the treatment of ->handled in
switchdev_port_obj_notify() seems to be designed to change that back
to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e.,
everybody returned -EOPNOTSUPP).

Currently, as soon as some device down the stack passes the check_cb()
check, ->handled gets set to true, which means that
switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP.

This, for example, means that the detection of hardware offload
support in the MRP code is broken: switchdev_port_obj_add() used by
br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP
code thinks the generation of MRP test frames has been offloaded, no
such frames are actually put on the wire. Similarly,
br_mrp_switchdev_set_ring_role() also always returns 0, causing
mrp->ring_role_offloaded to be set to 1.

To fix this, continue to set ->handled true if any callback returns
success or any error distinct from -EOPNOTSUPP. But if all the
callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so
the logic in switchdev_port_obj_notify() can propagate that
information.

Fixes: 9a9f26e8f7 ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: f30f0601eb ("switchdev: Add helpers to aid traversal through lower devices")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27 16:41:59 -08:00
Jian Dong
a72acc56f3 power-supply: use kobj_to_dev()
Use kobj_to_dev() instead of open-coding it

Signed-off-by: Jian Dong <dongjian@yulong.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-28 01:31:42 +01:00
Andres Calderon Jaramillo
fed3875720 drm/i915/display: Prevent double YUV range correction on HDR planes
Prevent the ICL HDR plane pipeline from performing YUV color range
correction twice when the input is in limited range. This is done by
removing the limited-range code from icl_program_input_csc().

Before this patch the following could happen: user space gives us a YUV
buffer in limited range; per the pipeline in [1], the plane would first
go through a "YUV Range correct" stage that expands the range; the plane
would then go through the "Input CSC" stage which would also expand the
range because icl_program_input_csc() would use a matrix and an offset
that assume limited-range input; this would ultimately cause dark and
light colors to appear darker and lighter than they should respectively.

This is an issue because if a buffer switches between being scanned out
and being composited with the GPU, the user will see a color difference.
If this switching happens quickly and frequently, the user will perceive
this as a flickering.

[1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281

Cc: stable@vger.kernel.org
Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com
2021-01-28 01:35:25 +02:00
Cong Wang
8063e184e4 skmsg: Make sk_psock_destroy() static
sk_psock_destroy() is a RCU callback, I can't see any reason why
it could be used outside.

Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210127221501.46866-1-xiyou.wangcong@gmail.com
2021-01-28 00:35:03 +01:00
Jaegeuk Kim
d5f7bc0064 f2fs: deprecate f2fs_trace_io
This patch deprecates f2fs_trace_io, since f2fs uses page->private more broadly,
resulting in more buggy cases.

Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27 15:20:07 -08:00