Commit graph

996,399 commits

Author SHA1 Message Date
Ofir Bitton
d2b980f329 habanalabs: add security violations dump to debugfs
In order to improve driver security debuggability, we add
security violations dump to debugfs.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Ofir Bitton
eea4c2557c habanalabs: ignore F/W BMC errors in case no BMC present
In order to support operation mode in which BMC is not active,
driver must not take BMC errors into consideration.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Ofir Bitton
f8bc7f091c habanalabs/gaudi: print sync manager SEI interrupt info
Driver must print sync manager SEI information upon receiving
interrupt from FW.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Christophe JAILLET
825b30c4f3 habanalabs: Use 'dma_set_mask_and_coherent()'
Axe 'hl_pci_set_dma_mask()' and replace it with an equivalent
'dma_set_mask_and_coherent()' call.

This makes the code a bit less verbose.

It also removes an erroneous comment, because 'hl_pci_set_dma_mask()'
does not try to use a fall-back value.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Ofir Bitton
423815bf02 habanalabs/gaudi: remove PCI access to SM block
Due to HW limitation we must remove all direct access to SM
registers, in order to do that we will access SM registers using
the HW QMANS.
When possible and no user context is present, we can directly access
the HW QMANS. Whenever there is an active user, driver will
prepare a pending command buffer list which will be sent upon
user submissions.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Ofir Bitton
d3f139c462 habanalabs: add driver support for internal cb scheduling
In order to support scnenarios in which driver needs access to
HW components but it cannot access them directly, we add support for
scheduling command buffers internally.
These command buffers will be transmitted upon next user command
submission context.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Ofir Bitton
1e3f2536a8 habanalabs: increment ctx ref from within a cs allocation
A CS must increment the relevant context reference count.
We want to increment the reference inside the CS allocation function
as opposed for today where we increment it outside.
This is logical since we want to avoid explicitly incrementing
the context every time we call the CS allocate function.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Ofir Bitton
8563e19159 habanalabs: separate common code to dedicated folders
We separate some of the common code source files to different
folders for a better maintainability and testability.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Ofir Bitton
edb07cb69c habanalabs: read device boot errors after cpucp is up
Boot cpu can report errors in various boot stages.
Current implementaion does not take into consideration errors
reported in late stages, hence we will check for errors at the most
late stage when fetching cpucp information.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:50 +02:00
Ofir Bitton
6769cea8de habanalabs: report correct dram size in info ioctl
In case MMU is enabled, we must take MMU page size into
consideration when reporting dram size to the user.
This is because the MMU page size can be a value which is NOT
a power-of-2 value. As a result, the total DRAM size (which is always
a power-of-2 value) needed to be rounded-down.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Moti Haimovski
b19dc67aa8 habanalabs: support non power-of-2 DRAM phys page sizes
DRAM physical page sizes depend of the amount of HBMs available in
the device. this number is device-dependent and may also be subject
to binning when one or more of the DRAM controllers are found to
to be faulty. Such a configuration may lead to partitioning the DRAM
to non-power-of-2 pages.

To support this feature we also need to add infrastructure of address
scarmbling.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Ofir Bitton
a1f8533269 habanalabs: remove access to kernel memory using debugfs
Accessing kernel allocated memory through debugfs should not
be allowed as it introduces a security vulnerability.
We remove the option to read/write kernel memory for all asics.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Ofir Bitton
266cdfa2b7 habanalabs/gaudi: set uninitialized symbol
Initialize local variable that is returned by the function, in
case it is never assigned.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Alon Mizrahi
9402a33624 habanalabs: return dram virtual address in info ioctl
When working with DRAM MMU, we should supply the userspace with the
virtual start address of the DRAM instead of the physical one. This
is because the physical one has no meaning for the user as he only
knows the virtual address range.

Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Oded Gabbay
3abe1040ba habanalabs: update to latest hl_boot_if.h
Update the latest version of this file that the F/W exports

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Oded Gabbay
1530d46817 habanalabs: add ASIC property of functional HBMs
The number of functional HBMs in the same ASIC can be different due
to malfunctioning HBM banks.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Ofir Bitton
2e36856008 habanalabs/gaudi: add debug prints for security status
In order to have more information while debugging boot issues,
we should print the firmware security status at every boot stage.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Omer Shpigelman
f19040ce41 habanalabs: modify memory functions signatures
For consistency, modify all memory ioctl functions to get the ioctl
arguments structure rather than the arguments themselves.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Omer Shpigelman
3b762f55aa habanalabs: kernel doc format in memory functions
Change all memory functions documentation according to kernel doc
format.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Alon Mizrahi
75d9a2a0aa habanalabs: replace WARN/WARN_ON with dev_crit in driver
Often WARN is defined in data-centers as BUG and we would like to
avoid hanging the entire server on some internal error of the driver
(important as it might be).

Therefore, use dev_crit instead.

Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Moti Haimovski
0eda23d77e habanalabs: report dram_page_size in hw_ip_info ioctl
Instead of having it hard-coded as a define, pass it to the user
in runtime.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Ohad Sharabi
e1b85dbaf0 habanalabs/goya: move mmu_prepare to context init
Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:49 +02:00
Ofir Bitton
f8b0f2ecc5 habanalabs/gaudi: remove duplicated gaudi packets masks
As all packets use the same CTL register masks, we remove duplicated
masks and use common masks instead.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:48 +02:00
Ofir Bitton
c209e74214 habanalabs: allow user to pass a staged submission seq
In order to support the staged submission feature, user must be
allowed to use the same CS sequence for all submissions in the
same staged submission.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:48 +02:00
Ofir Bitton
ac6fdbfe2e habanalabs/gaudi: support CS with no completion
As part of the staged submission feature, we need Gaudi to support
command submissions that will never get a completion.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:48 +02:00
Ofir Bitton
8e39e75a13 habanalabs: Init the VM module for kernel context
In order for reserving VA ranges for kernel memory, we need
to allow the VM module to be initiated with kernel context.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:48 +02:00
Ohad Sharabi
cb6ef0ee6d habanalabs: refactor MMU locks code
remove mmu_cache_lock as it protects a section which is already
protected by mmu_lock.

in addition, wrap mmu cache invalidate calls in hl_vm_ctx_fini with
mmu_lock.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:48 +02:00
Oded Gabbay
4c998836d4 habanalabs: update firmware boot interface
Update to latest firmware hl_boot_if.h file.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-27 21:03:48 +02:00
Nicolas Pitre
0bfa0820c2 PM: clk: make PM clock layer compatible with clocks that must sleep
The clock API splits its interface into sleepable ant atomic contexts:

 - clk_prepare/clk_unprepare for stuff that might sleep

 - clk_enable_clk_disable for anything that may be done in atomic context

The code handling runtime PM for clocks only calls clk_disable() on
suspend requests, and clk_enable on resume requests. This means that
runtime PM with clock providers that only have the prepare/unprepare
methods implemented is basically useless.

Many clock implementations can't accommodate atomic contexts. This is
often the case when communication with the clock happens through another
subsystem like I2C or SCMI.

Let's make the clock PM code useful with such clocks by safely invoking
clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when
such clocks are registered with the PM layer then pm_runtime_irq_safe()
can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume()
may be invoked in atomic context.

For clocks that do implement the enable and disable methods then
everything just works as before.

A note on sparse:
According to https://lwn.net/Articles/109066/ there are things
that sparse can't cope with. In particular, pm_clk_op_lock() and
pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on
some runtime condition. To work around that we tell it the lock is
always untaken for the purpose of static analisys.

Thanks to Naresh Kamboju for reporting issues with the initial patch.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 19:29:32 +01:00
Zhang Rui
cca26b66ef powercap/intel_rapl: add support for AlderLake Mobile
Add intel_rapl support for the AlderLake Mobile platform.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 19:26:47 +01:00
Bjorn Helgaas
309663093c PM: runtime: Fix typos and grammar
Fix minor typos and grammatical issues.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 19:23:38 +01:00
Bjorn Helgaas
eb23d91af5 PM: sleep: Use dev_printk() when possible
Use dev_printk() when possible to make messages more consistent with other
device-related messages.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 19:21:17 +01:00
Zqiang
ccf7ce46ab PM: sleep: No need to check PF_WQ_WORKER in thaw_kernel_threads()
Because PF_KTHREAD is set for all wq worker threads, it is
not necessary to check PF_WQ_WORKER in addition to it in
thaw_kernel_threads(), so stop doing that.

Signed-off-by: Zqiang <qiang.zhang@windriver.com>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 19:20:17 +01:00
Marek Szyprowski
daf12bee07 arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN
pin to the high impedance mode, otherwise the board is stuck in the
middle of loading early stages of the bootloader from SD card.

This can be achieved by using the OPEN_DRAIN flag instead of the
ACTIVE_HIGH, what will leave the pin in input mode to achieve high state
(pin has the pull-up) and solve the issue.

Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: 326e57518b ("arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210122055218.27241-1-m.szyprowski@samsung.com
2021-01-27 10:08:23 -08:00
Misono Tomohiro
02a16aa135 x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too
Commit

  a7e1f67ed2 ("x86/msr: Filter MSR writes")

introduced a module parameter to disable writing to the MSR device file
and tainted the kernel upon writing. As MSR registers can be written by
the X86_IOC_WRMSR_REGS ioctl too, the same filtering and tainting should
be applied to the ioctl as well.

 [ bp: Massage commit message and space out statements. ]

Fixes: a7e1f67ed2 ("x86/msr: Filter MSR writes")
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210127122456.13939-1-misono.tomohiro@jp.fujitsu.com
2021-01-27 19:06:47 +01:00
Yazen Ghannam
dc20c40920 ACPI: APEI: Add is_generic_error() to identify GHES sources
Refactor duplicated GHES identity logic into is_generic_error().

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 19:01:53 +01:00
Hans de Goede
041142d7d2 ACPI: platform-profile: Fix possible deadlock in platform_profile_remove()
After a rmmod thinkpad_acpi, lockdep pointed out this possible deadlock:

Our _show and _store sysfs attr functions get called with the kn->active
lock held for the sysfs attr and then take the profile_lock.
sysfs_remove_group() also takes the kn->active lock for the sysfs attr,
so if we call it with the profile_lock held, then we get an ABBA deadlock.

platform_profile_remove() must only be called by drivers which have
first *successfully* called platform_profile_register(). Anything else
is a driver bug. So the check for cur_profile being set before calling
sysfs_remove_group() is not necessary and it can be dropped.

It is safe to call sysfs_remove_group() without holding the profile_lock
since the attr-group group cannot be re-added until after we clear
cur_profile.

Change platform_profile_remove() to only hold the profile_lock while
clearing the cur_profile, fixing the deadlock.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 18:48:12 +01:00
Jiaxun Yang
84f9017c37 ACPI: platform-profile: Introduce object pointers to callbacks
Add an object pointer to handler callbacks to avoid the need for
drivers to have a global variable to get to their driver-data
struct.

Link: https://lore.kernel.org/linux-acpi/6a29f338-d9e4-150c-81dd-2ffb54f5bc35@redhat.com/
Link: https://lore.kernel.org/r/20210114073429.176462-3-jiaxun.yang@flygoat.com
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 18:45:29 +01:00
Bjorn Helgaas
10e927249c ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILURE
The double negative makes it hard to read "if (!ACPI_FAILURE(status))".
Replace it with "if (ACPI_SUCCESS(status))".

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27 18:43:07 +01:00
Florian Fainelli
8b8f095b90 soc: bcm: brcmstb: Remove soc_is_brcmstb()
We have no in tree or out of tree users of this function, remove it and
the header providing its prototype.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-27 09:36:41 -08:00
Libin Yang
e32df14235
ASoC: Intel: adl: remove sof_fw_filename setting in ADL snd_soc_acpi_mach
ADL will use sof-adl-s.ri if it is ADL-S platform. So let's use
the default_fw_filename in pdata->desc for the ADL FW filename.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125070500.807474-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-27 17:28:28 +00:00
Chaitanya Kulkarni
59c157433f nvme-core: check bdev value for NULL
The nvme-core sets the bdev to NULL when admin comamnd is issued from
IOCTL in the following path e.g. nvme list :-

block_ioctl()
 blkdev_ioctl()
  nvme_ioctl()
   nvme_user_cmd()
    nvme_submit_user_cmd()

The commit 309dca309f ("block: store a block_device pointer in struct bio")
now uses bdev unconditionally in the macro bio_set_dev() and assumes
that bdev value is not NULL which results in the following crash in
since thats where bdev is actually accessed :-

void bio_associate_blkg_from_css(struct bio *bio,
				 struct cgroup_subsys_state *css)
{
	if (bio->bi_blkg)
		blkg_put(bio->bi_blkg);

	if (css && css->parent) {
		bio->bi_blkg = blkg_tryget_closest(bio, css);
	} else {
-------------->	blkg_get(bio->bi_bdev->bd_disk->queue->root_blkg);
		bio->bi_blkg = bio->bi_bdev->bd_disk->queue->root_blkg;
	}
}
EXPORT_SYMBOL_GPL(bio_associate_blkg_from_css);

[  345.385947] BUG: kernel NULL pointer dereference, address: 0000000000000690
[  345.387103] #PF: supervisor read access in kernel mode
[  345.387894] #PF: error_code(0x0000) - not-present page
[  345.388756] PGD 162a2b067 P4D 162a2b067 PUD 1633eb067 PMD 0
[  345.389625] Oops: 0000 [#1] SMP NOPTI
[  345.390206] CPU: 15 PID: 4100 Comm: nvme Tainted: G           OE     5.11.0-rc5blk+ #141
[  345.391377] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba52764
[  345.393074] RIP: 0010:bio_associate_blkg_from_css.cold.47+0x58/0x21f

[  345.396362] RSP: 0018:ffffc90000dbbce8 EFLAGS: 00010246
[  345.397078] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
[  345.398114] RDX: 0000000000000000 RSI: ffff888813be91f0 RDI: ffff888813be91f8
[  345.399039] RBP: ffffc90000dbbd30 R08: 0000000000000001 R09: 0000000000000001
[  345.399950] R10: 0000000064c66670 R11: 00000000ef955201 R12: ffff888812d32800
[  345.401031] R13: 0000000000000000 R14: ffff888113e51540 R15: ffff888113e51540
[  345.401976] FS:  00007f3747f1d780(0000) GS:ffff888813a00000(0000) knlGS:0000000000000000
[  345.402997] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  345.403737] CR2: 0000000000000690 CR3: 000000081a4bc000 CR4: 00000000003506e0
[  345.404685] Call Trace:
[  345.405031]  bio_associate_blkg+0x71/0x1c0
[  345.405649]  nvme_submit_user_cmd+0x1aa/0x38e [nvme_core]
[  345.406348]  nvme_user_cmd.isra.73.cold.98+0x54/0x92 [nvme_core]
[  345.407117]  nvme_ioctl+0x226/0x260 [nvme_core]
[  345.407707]  blkdev_ioctl+0x1c8/0x2b0
[  345.408183]  block_ioctl+0x3f/0x50
[  345.408627]  __x64_sys_ioctl+0x84/0xc0
[  345.409117]  do_syscall_64+0x33/0x40
[  345.409592]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  345.410233] RIP: 0033:0x7f3747632107

[  345.413125] RSP: 002b:00007ffe461b6648 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
[  345.414086] RAX: ffffffffffffffda RBX: 00000000007b7fd0 RCX: 00007f3747632107
[  345.414998] RDX: 00007ffe461b6650 RSI: 00000000c0484e41 RDI: 0000000000000004
[  345.415966] RBP: 0000000000000004 R08: 00000000007b7fe8 R09: 00000000007b9080
[  345.416883] R10: 00007ffe461b62c0 R11: 0000000000000206 R12: 00000000007b7fd0
[  345.417808] R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000

Add a NULL check before we set the bdev for bio.

This issue is found on block/for-next tree.

Fixes: 309dca309f ("block: store a block_device pointer in struct bio")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 10:10:15 -07:00
Emil Renner Berthing
9159835a97 vt: keyboard, use new API for keyboard_tasklet
This converts the keyboard_tasklet to use the new API in
commit 12cc923f1c ("tasklet: Introduce new initialization API")

The new API changes the argument passed to the callback function, but
fortunately the argument isn't used so it is straight forward to use
DECLARE_TASKLET_DISABLED() rather than DECLARE_TASKLET_DISABLED_OLD().

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20210127164222.13220-1-kernel@esmil.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 18:08:07 +01:00
Jens Axboe
3e3126cf2a mm: only make map_swap_entry available for CONFIG_HIBERNATION
Current tree spews this on compile:

mm/swapfile.c:2290:17: warning: ‘map_swap_entry’ defined but not used [-Wunused-function]
 2290 | static sector_t map_swap_entry(swp_entry_t entry, struct block_device **bdev)
       |                 ^~~~~~~~~~~~~~

if !CONFIG_HIBERNATION, as we don't use the function unless we have that
config option set.

Fixes: 48d15436fd ("mm: remove get_swap_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 10:04:49 -07:00
Christoph Hellwig
48d15436fd mm: remove get_swap_bio
Just reuse the block_device and sector from the swap_info structure,
just as used by the SWP_SYNCHRONOUS path.  Also remove the checks for
NULL returns from bio_alloc as that can't happen for sleeping
allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 09:51:49 -07:00
Christoph Hellwig
64820ac6c6 nilfs2: remove cruft in nilfs_alloc_seg_bio
bio_alloc never returns NULL when it can sleep.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 09:51:48 -07:00
Christoph Hellwig
6808f7af96 nfs/blocklayout: remove cruft in bl_alloc_init_bio
bio_alloc never returns NULL when it can sleep.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 09:51:48 -07:00
Christoph Hellwig
e82ed3a4fb md/raid6: refactor raid5_read_one_chunk
Refactor raid5_read_one_chunk so that all simple checks are done
before allocating the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 09:51:48 -07:00
Christoph Hellwig
6a59656968 md: remove md_bio_alloc_sync
md_bio_alloc_sync is never called with a NULL mddev, and ->sync_set is
initialized in md_run, so it always must be initialized as well.  Just
open code the remaining call to bio_alloc_bioset.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 09:51:48 -07:00
Christoph Hellwig
32637385b8 md: simplify sync_page_io
Use an on-stack bio and biovec for the single page synchronous I/O.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 09:51:48 -07:00