Make trans_pgd_create_copy and its subroutines to use allocator that is
passed as an argument
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-6-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
kexec is going to use a different allocator, so make
trans_pgd_map_page to accept allocator as an argument, and also
kexec is going to use a different map protection, so also pass
it via argument.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-5-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Now, that we abstracted the required functions move them to a new home.
Later, we will generalize these function in order to be useful outside
of hibernation.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-4-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
There should be p4dp used when p4d page is allocated.
This is not a functional issue, but for the logical correctness this
should be fixed.
Fixes: e9f6376858 ("arm64: add support for folded p4d page tables")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-3-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, dtb_mem is enabled only when CONFIG_KEXEC_FILE is
enabled. This adds ugly ifdefs to c files.
Always enabled dtb_mem, when it is not used, it is NULL.
Change the dtb_mem to phys_addr_t, as it is a physical address.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-2-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
This message:
acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
is alarming and slightly misleading. Per the PCI Firmware Spec, r3.2, sec
4.5.1, _OSC is required for PCIe hierarchies. If _OSC is absent or fails,
the OS must not attempt to use any of the features defined for _OSC. That
includes native hotplug, native PME, AER, and other things as well as ASPM.
Rephrase the message to:
acpi PNP0A08:02: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
Previous discussion at https://lore.kernel.org/r/20200602223618.GA845676@bjorn-Precision-5520/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
9778c14b4c ("ACPI/PCI: Fix possible race condition on _OSC evaluation")
added locking around _OSC calls to protect the acpi_osc_data_list that
stored the results.
63f10f0f6d ("PCI/ACPI: move _OSC code to pci_root.c") moved the results
from acpi_osc_data_list to the struct acpi_pci_root, where it no longer
needs locking, but did not remove the lock.
Remove the unnecessary locking around _OSC calls.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_pci_osc_control_set() is only called from pci_root.c, so stop
exporting it and make it static.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The snd_soc_put_volsw in max98373_feedback_get is a typo, change it
to snd_soc_get_volsw.
Fixes: 349dd23931 ("ASoC: max98373: don't access volatile registers in bias level off")
Signed-off-by: Judy Hsiao <judyhsiao@google.com>
Link: https://lore.kernel.org/r/20210127135620.1143942-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
HFI_PROPERTY_CONFIG_VENC_IDR_PERIOD is supported for only
H264 & HEVC codec. There is no need to set it for VP8 since
all key frames are treated as IDR frames for VP8.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- return correct width and height for G_SELECTION
- update capture port wxh with rectangle wxh.
- add support for HFI_PROPERTY_PARAM_UNCOMPRESSED_PLANE_ACTUAL_INFO
to set stride info and chroma offset to FW.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Presently we use device_link to control core power domain. But this
leads to issues because the genpd doesn't guarantee synchronous on/off
for supplier devices. Switch to manually control by pmruntime calls.
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The dependency on interconnect in the Kconfig was introduced to avoid
the case of interconnect=m and driver=y, but the interconnect framework
has been converted from tristate to bool now. Remove the dependency as
the framework can't be a module anymore.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support to dump video FW region during FW crash
using devcoredump helpers.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the following sparse warning:
hfi_plat_bufs_v6.c:1242:5: warning: symbol 'bufreq_enc' was not declared.
Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the case where plat->codecs is NULL the variable count is uninitialized
but is being checked to see if it is 0. Fix this by initializing
count to 0.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: e29929266b ("media: venus: Get codecs and capabilities from hfi platform")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Allegro Codec supports HEVC encoding. The messages to the MCU are
the same for H.264 and HEVC, but some options have to be changed. These
are actually only a few options.
The driver, however, must add the HEVC VPS/SPS/PPS NAL Units to the
coded stream and must properly provide the HEVC format and controls to
user space.
[hverkuil: fix warning for wrong enum type (h264 instead of hevc)]
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
These controls are specific to H.264 and shall only be activated, if the
coded format is H.264.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The HEVC Non-VCL NAL units require more space than the H.264 Non-VCL NAL
units. Therefore, the driver needs to reserve more space in front of the
actual coded data that is written by the hardware codec.
Increase the offset that shall be used by the hardware codec from 64
bytes to 128 bytes which is as arbitrary as before.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The maximum bitrate and the size of the CPB are dependent on the level.
As the levels differ between the different codecs, the functions to get
the maximum bitrate and CPB must be codec specific, too.
Rename the functions to make it obvious that the function are only valid
for H.264.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver only supports CAVLC for H.264, but HEVC only uses CABAC. As
the driver has to explicitly tell the MCU to use CABAC for HEVC, add a
helper function to get the entropy mode.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2 specifies different controls for the QP values of different codecs.
Simplify users that just care for the QP values by providing accessor
function that return the correct control based on the currently set
codec.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The profile and level are straight copies from the v4l2-ctrls. Avoid
duplication and directly read the value of the v4l2-ctrl.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cpb_size and the gop_size are straight copies of the values in the
v4l2-ctrls. To avoid this duplication, directly get the values from the
v4l2-ctrls and remove the copies.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cbp_size_value_minus1 in the SPS can scaled using cpb_size_scale to
reduce the number of bits necessary to encode the value. For simplicity,
the scaling was set to 1.
Restructure to the code to make it easier to drop the cbp_size from the
channel and as we are at it, also properly implement the scaling.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As the driver now uses the v4l2-ctrls to setup the channel, there is no
need to explicitly set the bitrate. The initial bitrate is now set via
the same path as if it is set from userspace using the v4l2-ctrl.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
v4l2_ctrl_handler_setup() calls s_ctrl for all controls of the handler.
This ensures that the channel is initialized using the default values of
the v4l2-ctrls.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The log2_max_poc field is used to set log2_max_pic_order_cnt_lsb_minus4
for the coded stream. It has an allowed range of 0 to 12.
param contains the value without the minus4, but since firmware
version 2019.1, the value has to be log2_max_pic_order_cnt_lsb - 1,
presumably to fit the maximum value of 16 into a 4 bit field.
The driver does not support firmware version 2019.1. Thus, change the
behaviour starting from firmware version 2019.2.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several encoding options that are hard coded in the parameter
that is used to configure the hardware codec. However, some of the
options must be written to the SPS/PPS by the driver. Furthermore, some
of the options depend on the codec that is used (i.e. H.264 or HEVC).
Therefore, move options that depend on the codec to the channel and add
constants for options that are independent of the codec but must be
written to the SPS/PPS.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A format change (i.e. the frame size or the codec) has multiple effects
on a channel:
- The available controls
- The limits of the available controls
- The default encoding options
To avoid scattering the changes all over the driver, add a new function
that goes over the channel and does all required adjustments.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to support different codecs, the driver must support changing
the format on CAPTURE. Therefore, the driver needs to handle S_FMT on
CAPTURE.
As the driver will have a different number of formats for OUTPUT and
CAPTURE, split the check for the format index in ENUM_FMT into CAPTURE
and OUTPUT.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are multiple instances of GPIO device tree nodes of the form:
foo {
compatible = "acme,foo";
...
gpio0: gpio0@xxxxxxxx {
compatible = "acme,bar";
...
gpio-controller;
};
gpio1: gpio1@xxxxxxxx {
compatible = "acme,bar";
...
gpio-controller;
};
...
}
bazz {
my-gpios = <&gpio0 ...>;
}
Case 1: The driver for "foo" populates struct device for these gpio*
nodes and then probes them using a driver that binds with "acme,bar".
This driver for "acme,bar" then registers the gpio* nodes with gpiolib.
This lines up with how DT nodes with the "compatible" property are
typically converted to struct devices and then registered with driver
core to probe them. This also allows the gpio* devices to hook into all
the driver core capabilities like runtime PM, probe deferral,
suspend/resume ordering, device links, etc.
Case 2: The driver for "foo" doesn't populate struct devices for these
gpio* nodes before registering them with gpiolib. Instead it just loops
through its child nodes and directly registers the gpio* nodes with
gpiolib.
Drivers that follow case 2 cause problems with fw_devlink=on. This is
because fw_devlink will prevent bazz from probing until there's a struct
device that has gpio0 as its fwnode (because bazz lists gpio0 as a GPIO
supplier). Once the struct device is available, fw_devlink will create a
device link with gpio0 device as the supplier and bazz device as the
consumer. After this point, since the gpio0 device will never bind to a
driver, the device link will prevent bazz device from ever probing.
Finding and refactoring all the instances of drivers that follow case 2
will cause a lot of code churn and it is not something that can be done
in one shot. In some instances it might not even be possible to refactor
them cleanly. Examples of such instances are [1] [2].
This patch works around this problem and avoids all the code churn by
simply setting the fwnode of the gpio_device and creating a stub driver
to bind to the gpio_device. This allows all the consumers to continue
probing when the driver follows case 2.
[1] - https://lore.kernel.org/lkml/20201014191235.7f71fcb4@xhacker.debian/
[2] - https://lore.kernel.org/lkml/e28e1f38d87c12a3c714a6573beba6e1@kernel.org/
Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210122193600.1415639-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When encoding a video as HEVC, the allegro driver needs to generate the
Non-VCL NAL units for HEVC. Do the same as for H.264 and add a module
that takes C structs for the VPS/SPS/PPS and encodes the fields as RBPS
as specified by "ITU-T Rec. H.265 (02/2018) high efficiency video
coding".
[hverkuil: add missing static for nal_hevc_write/read_start_code_prefix]
[hverkuil: fix typo: pps -> vps in nal_hevc_write_vps]
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Allow generators to explicitly signal an error if the C structs contain
unsupported or invalid fields.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When set_config changes a line from input to output debounce is
implicitly disabled, as debounce makes no sense for outputs, but the
debounce period is not being cleared and is still reported in the
line info.
So clear the debounce period when the debouncer is stopped in
edge_detector_stop().
Fixes: 65cff70464 ("gpiolib: cdev: support setting debounce")
Cc: stable@vger.kernel.org
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The RBSP structure is the same for HEVC and H.264. In order to be able
to reuse the RBSP handler for generating HEVC NAL units, extract the
functions from the H.264 generator.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 1b5071af82 ("media: dt-bindings: media: i2c: Rename
ov5647.yaml") renamed the bindings file but did not update the
Id: field there.
Fix it by using the new filename.
Fixes: 1b5071af82 ("media: dt-bindings: media: i2c: Rename ov5647.yaml")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make the V4L2 async framework a bit more robust by allowing to
unregister a non-registered async subdev. Otherwise the
v4l2_async_cleanup() will attempt to delete the async subdev from the
subdev_list with the corresponding list_head not initialized.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is currently little to no information available about the reasons
why a v4l2-async device hasn't probed completely.
Inspired by the "devices_deferred" debugfs file, add a file to list
information about the subdevices that are on waiting lists, for each
notifier.
This is useful to debug v4l2-async subdevices and notifiers, for instance
when doing device bring-up.
For instance, a typical output would be:
$ cat /sys/kernel/debug/video4linux/pending_async_subdevices
ipu1_csi1:
[fwnode] dev=20e0000.iomuxc-gpr:ipu1_csi1_mux, node=/soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux
ipu1_csi0:
[fwnode] dev=20e0000.iomuxc-gpr:ipu1_csi0_mux, node=/soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux
imx6-mipi-csi2:
[fwnode] dev=1-003c, node=/soc/bus@2100000/i2c@21a4000/camera@3c
imx-media:
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It is better to replace the function name with %s, in case the function
name changes.
Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Custom/driver-specific v4l2-async match support was introduced
in 2013, as V4L2_ASYNC_BUS_CUSTOM.
This type of match never had any user, so it's fair
to conclude it's not required and that safe for removal.
If the support is ever needed, it can always be restored.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the autorescan sysfs in order to enable/disable the DPRC IRQs on
which automatic rescan of the bus is performed. This is important when
dynamic creation of objects is needed to happen in a timely manner because
object creation can be bundled together.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-6-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce the rescan attribute as a bus attribute to
synchronize the fsl-mc bus objects and the MC firmware.
To rescan the fsl-mc bus, e.g.,
echo 1 > /sys/bus/fsl-mc/rescan
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-5-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding userspace support for the MC (Management Complex) means exporting
an ioctl capable device file representing the root resource container.
This new functionality in the fsl-mc bus driver intends to provide
userspace applications an interface to interact with the MC firmware.
Commands that are composed in userspace are sent to the MC firmware
through the FSL_MC_SEND_MC_COMMAND ioctl. By default the implicit MC
I/O portal is used for this operation, but if the implicit one is busy,
a dynamic portal is allocated and then freed upon execution.
The command received through the ioctl interface is checked against a
known whitelist of accepted MC commands. Commands that attempt a change
in hardware configuration will need CAP_NET_ADMIN, while commands used
in debugging do not need it.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-4-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Export the mc_cmd_hdr_read_cmdid() function to the entire fsl-mc bus
since it will be needed in the following patch.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-3-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>