Due to usb-device.txt is converted into usb-device.yaml,
so modify reference file names at the same time.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20201225075258.33352-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch allows the administrator to configure the interface
name of a function using u_ether (e.g., eem, ncm, rndis).
Currently, all such interfaces, regardless of function type, are
always called usb0, usb1, etc. This makes it very cumbersome to
use more than one such type at a time, because userspace cannnot
easily tell the interfaces apart and apply the right
configuration to each one. Interface renaming in userspace based
on driver doesn't help, because the interfaces all have the same
driver. Without this patch, doing this require hacks/workarounds
such as setting fixed MAC addresses on the functions, and then
renaming by MAC address, or scraping configfs after each
interface is created to find out what it is.
Setting the interface name is done by writing to the same
"ifname" configfs attribute that reports the interface name after
the function is bound. The write must contain an interface
pattern such as "usb%d" (which will cause the net core to pick
the next available interface name starting with "usb").
This patch does not allow writing an exact interface name (as
opposed to a pattern) because if the interface already exists at
bind time, the bind will fail and the whole gadget will fail to
activate. This could be allowed in a future patch.
For compatibility with current userspace, when reading an ifname
that has not currently been set, the result is still "(unnamed
net_device)". Once a write to ifname happens, then reading ifname
will return whatever was last written.
Tested by configuring an rndis function and an ncm function on
the same gadget, and writing "rndis%d" to ifname on the rndis
function and "ncm%d" to ifname on the ncm function. When the
gadget was bound, the rndis interface was rndis0 and the ncm
interface was ncm0.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Link: https://lore.kernel.org/r/20210113234222.3272933-1-lorenzo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the necessary PCI ID for Intel Alder Lake-P
devices.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-5-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tiger Lake SOC (the versions of it that have integrated USB4
controller) may have two DWC3 controllers. One is part of
the PCH (Platform Controller Hub, i.e. the chipset) as
usual, and the other is inside the actual CPU block.
On all Intel platforms that have the two separate DWC3
controllers, the one inside the CPU handles USB3 and only
USB3 traffic, while the PCH version handles USB2 and USB2
alone. The reason for splitting the two busses like this is
to allow easy USB3 tunneling over USB4 connections. As USB2
is not tunneled over USB4, it has dedicated USB controllers
(both xHCI and DWC3).
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-4-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By registering the software node directly instead of just
the properties in it, the driver can take advantage of also
the other features the software nodes have.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This helper will register a software node and then assign
it to device at the same time. The function will also make
sure that the device can't have more than one software node.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable lt9611uxc driver for Lontium DSI to HDMI bridge found on Qualcomm
RB5 Robotics platform. Enable this driver to get display working on this
platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201228151827.4019213-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the driver for the display clock controller on Qualcomm SM8250,
needed in order to get the display working. This driver provides
power-domains and as such should not be compiled as a module.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201228151225.4018477-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There doesn't seem to be any reason to limit this to only root user
readable. Let's make it readable by all so that random programs can
read the debugfs files in here instead of just root. The information is
just that, informational, so this is fine.
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201216071926.3147108-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Lower drive strength for microSD data and CMD pins from 16 to 10. This
fixes spurious card removal issues observed on some boards. Also this
change allows us to re-enable 1.8V support, which seems to work with
lowered drive strength.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Fixes: 53a8ccf1c7 ("arm64: dts: qcom: rb5: Add support for uSD card")
Link: https://lore.kernel.org/r/20201217183341.3186402-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
From version 2.35, binutils can be configured with
--enable-mips-fix-loongson3-llsc=yes, which means it defaults to
-mfix-loongson3-llsc. This breaks labels which might then point at the
wrong instruction.
The workaround to explicitly pass -mno-fix-loongson3-llsc has been
added in Linux version 5.1, but is only enabled when building a Loongson
64 kernel. As vendors might use a common toolchain for building Loongson
and non-Loongson kernels, just move that workaround to
arch/mips/Makefile. At the same time update the comments to reflect the
current status.
Cc: stable@vger.kernel.org # 5.1+
Cc: YunQiang Su <syq@debian.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When building with clang when CONFIG_CPU_LOONGSON3_WORKAROUNDS is
enabled:
In file included from lib/errseq.c:4:
In file included from ./include/linux/atomic.h:7:
./arch/mips/include/asm/atomic.h:52:1: warning: converting the result of
'<<' to a boolean always evaluates to true
[-Wtautological-constant-compare]
ATOMIC_OPS(atomic64, s64)
^
./arch/mips/include/asm/atomic.h:40:9: note: expanded from macro
'ATOMIC_OPS'
return cmpxchg(&v->counter, o, n);
^
./arch/mips/include/asm/cmpxchg.h:194:7: note: expanded from macro
'cmpxchg'
if (!__SYNC_loongson3_war)
^
./arch/mips/include/asm/sync.h:147:34: note: expanded from macro
'__SYNC_loongson3_war'
# define __SYNC_loongson3_war (1 << 31)
^
While it is not wrong that the result of this shift is always true in a
boolean context, it is not a problem here. Regardless, the warning is
really noisy so rather than making the shift a boolean implicitly, use
it in an equality comparison so the shift is used as an integer value.
Fixes: 4d1dbfe6cb ("MIPS: atomic: Emit Loongson3 sync workarounds within asm")
Fixes: a91f2a1dba ("MIPS: cmpxchg: Omit redundant barriers for Loongson3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add labels to the cpuN-thermal nodes to allow board files to use
a phandle instead replicating the node hierarchy when adjusting
certain properties.
Due to the 'sustainable-power' property CPU thermal zones are
more likely to need property updates than other SC7180 zones,
hence only labels for CPU zones are added for now.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210108141648.1.Ia8019b8b303ca31a06752ed6ceb5c3ac50bd1d48@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Solves the following repetitive warning when building with -Wshadow:
In file included from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:33,
from ./include/linux/dax.h:6,
from ./include/linux/mempolicy.h:11,
from kernel/fork.c:34:
./arch/mips/include/asm/mmu_context.h: In function ‘switch_mm’:
./arch/mips/include/asm/pgtable.h:97:16: warning: declaration of ‘flags’ shadows a previous local [-Wshadow]
97 | unsigned long flags; \
| ^~~~~
./arch/mips/include/asm/mmu_context.h:162:2: note: in expansion of macro ‘htw_stop’
162 | htw_stop();
| ^~~~~~~~
In file included from kernel/fork.c:102:
./arch/mips/include/asm/mmu_context.h:159:16: note: shadowed declaration is here
159 | unsigned long flags;
| ^~~~~
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
sm8250 has a big.LITTLE CPU setup with DynamIQ, so all cores are within
the same CPU cluster and LLC (Last-Level Cache) domain. Define this
topology to help the scheduler make decisions.
Signed-off-by: Danny Lin <danny@kdrag0n.dev>
Link: https://lore.kernel.org/r/20210112013255.415253-1-danny@kdrag0n.dev
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Solves the following repetitive warning when building with -Wshadow:
In file included from ./include/linux/bitops.h:32,
from ./include/linux/kernel.h:11,
from ./include/linux/skbuff.h:13,
from ./include/linux/if_ether.h:19,
from ./include/linux/etherdevice.h:20:
./arch/mips/include/asm/bitops.h: In function ‘test_and_set_bit_lock’:
./arch/mips/include/asm/bitops.h:46:16: warning: declaration of ‘orig’ shadows a previous local [-Wshadow]
46 | unsigned long orig, temp; \
| ^~~~
./arch/mips/include/asm/bitops.h:190:10: note: in expansion of macro ‘__test_bit_op’
190 | orig = __test_bit_op(*m, "%0",
| ^~~~~~~~~~~~~
./arch/mips/include/asm/bitops.h:185:21: note: shadowed declaration is here
185 | unsigned long res, orig;
| ^~~~
./arch/mips/include/asm/bitops.h: In function ‘test_and_clear_bit’:
./arch/mips/include/asm/bitops.h:46:16: warning: declaration of ‘orig’ shadows a previous local [-Wshadow]
46 | unsigned long orig, temp; \
| ^~~~
./arch/mips/include/asm/bitops.h:236:9: note: in expansion of macro ‘__test_bit_op’
236 | res = __test_bit_op(*m, "%1",
| ^~~~~~~~~~~~~
./arch/mips/include/asm/bitops.h:229:21: note: shadowed declaration is here
229 | unsigned long res, orig;
| ^~~~
./arch/mips/include/asm/bitops.h:46:16: warning: declaration of ‘orig’ shadows a previous local [-Wshadow]
46 | unsigned long orig, temp; \
| ^~~~
./arch/mips/include/asm/bitops.h:241:10: note: in expansion of macro ‘__test_bit_op’
241 | orig = __test_bit_op(*m, "%0",
| ^~~~~~~~~~~~~
./arch/mips/include/asm/bitops.h:229:21: note: shadowed declaration is here
229 | unsigned long res, orig;
| ^~~~
./arch/mips/include/asm/bitops.h: In function ‘test_and_change_bit’:
./arch/mips/include/asm/bitops.h:46:16: warning: declaration of ‘orig’ shadows a previous local [-Wshadow]
46 | unsigned long orig, temp; \
| ^~~~
./arch/mips/include/asm/bitops.h:273:10: note: in expansion of macro ‘__test_bit_op’
273 | orig = __test_bit_op(*m, "%0",
| ^~~~~~~~~~~~~
./arch/mips/include/asm/bitops.h:266:21: note: shadowed declaration is here
266 | unsigned long res, orig;
| ^~~~
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Now, after that all the sections are explicitly described and
declared in vmlinux.lds.S, we can enable ld orphan warnings to
prevent from missing any new sections in future.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When building kernel with both LD_DEAD_CODE_DATA_ELIMINATION and
UBSAN, LLVM stack generates lots of "unnamed data" sections:
ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_2)
is being placed in '.data.$__unnamed_2'
ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_3)
is being placed in '.data.$__unnamed_3'
ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_4)
is being placed in '.data.$__unnamed_4'
ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_5)
is being placed in '.data.$__unnamed_5'
[...]
Also handle this by adding the related sections to generic definitions.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When building kernel with LD_DEAD_CODE_DATA_ELIMINATION, LLVM stack
generates separate sections for compound literals, just like in case
with enabled LTO [0]:
ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o):
(.data..compoundliteral.14) is being placed in
'.data..compoundliteral.14'
ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o):
(.data..compoundliteral.15) is being placed in
'.data..compoundliteral.15'
ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o):
(.data..compoundliteral.16) is being placed in
'.data..compoundliteral.16'
ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o):
(.data..compoundliteral.17) is being placed in
'.data..compoundliteral.17'
[...]
Handle this by adding the related sections to generic definitions
as suggested by Sami [0].
[0] https://lore.kernel.org/lkml/20201211184633.3213045-3-samitolvanen@google.com
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
LLVM stack generates GOT table when building the kernel:
ld.lld: warning: <internal>:(.got) is being placed in '.got'
According to the debug assertions, it's not zero-sized and thus can't
be handled the way it's done for x86.
Also use the ARM64 path here and place it at the end of .text section.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
According to linker warnings, both GCC and LLVM generate '.rel.dyn'
symbols:
mips-alpine-linux-musl-ld: warning: orphan section `.rel.dyn'
from `init/main.o' being placed in section `.rel.dyn'
Link-time assertion shows that this section is sometimes empty,
sometimes not, depending on machine bitness and the compiler [0]:
LD .tmp_vmlinux.kallsyms1
mips64-linux-gnu-ld: Unexpected run-time relocations (.rel) detected!
Just use the ARM64 approach and declare it in vmlinux.lds.S closer
to __init_end.
[0] https://lore.kernel.org/linux-mips/20210109111259.GA4213@alpha.franken.de
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 866b6a89c6 ("MIPS: Add DWARF unwinding to assembly") added
-fno-asynchronous-unwind-tables to KBUILD_CFLAGS to prevent compiler
from emitting .eh_frame symbols.
However, as MIPS heavily uses CFI, that's not enough. Use the
approach taken for x86 (as it also uses CFI) and explicitly put CFI
symbols into the .debug_frame section (except for VDSO).
This allows us to drop .eh_frame from DISCARDS as it's no longer
being generated.
Fixes: 866b6a89c6 ("MIPS: Add DWARF unwinding to assembly")
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Discard GNU attributes (MIPS FP type, GNU Hash etc.) at link time
as kernel doesn't use it at all.
Solves a dozen of the following ld warnings (one per every file):
mips-alpine-linux-musl-ld: warning: orphan section `.gnu.attributes'
from `arch/mips/kernel/head.o' being placed in section
`.gnu.attributes'
mips-alpine-linux-musl-ld: warning: orphan section `.gnu.attributes'
from `init/main.o' being placed in section `.gnu.attributes'
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
A number of symbols from arch/mips/kernel/cps-vec.S is explicitly
placed into '.text.cps-vec' section.
There are no direct references to this section, so there's no need
to form it. '.balign 0x1000' directive will work anyway.
Moreover, this section was being placed in vmlinux differently
depending on CONFIG_LD_DEAD_CODE_DATA_ELIMINATION:
- with this option enabled, '.text.cps-vec' was being caught
by '.text.[0-9a-zA-Z_]*' from include/asm-generic/vmlinux.lds.h;
- without this option, '.text.cps-vec' was being caught
by discouraging '.text.*' from arch/mips/kernel/vmlinux.lds.S.
'.text.*' should not be used in vmlinux linker scripts at all as it
silently catches any orphan text sections.
So, remove both '.section .text.cps-vec' and '.text.*' from cps-vec.S
and vmlinux.lds.S respectively. As said, this does not affect related
functions alignment:
80116000 T mips_cps_core_entry
80116028 t not_nmi
80116200 T excep_tlbfill
80116280 T excep_xtlbfill
80116300 T excep_cache
80116380 T excep_genex
80116400 T excep_intex
80116480 T excep_ejtag
80116490 T mips_cps_core_init
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS uses its own declaration of rwdata, and thus it should be kept
in sync with the asm-generic one. Currently PAGE_ALIGNED_DATA() is
missing from the linker script, which emits the following ld
warnings:
mips-alpine-linux-musl-ld: warning: orphan section
`.data..page_aligned' from `arch/mips/kernel/vdso.o' being placed
in section `.data..page_aligned'
mips-alpine-linux-musl-ld: warning: orphan section
`.data..page_aligned' from `arch/mips/vdso/vdso-image.o' being placed
in section `.data..page_aligned'
Add the necessary declaration, so the mentioned structures will be
placed in vmlinux as intended:
ffffffff80630580 D __end_once
ffffffff80630580 D __start___dyndbg
ffffffff80630580 D __start_once
ffffffff80630580 D __stop___dyndbg
ffffffff80634000 d mips_vdso_data
ffffffff80638000 d vdso_data
ffffffff80638580 D _gp
ffffffff8063c000 T __init_begin
ffffffff8063c000 D _edata
ffffffff8063c000 T _sinittext
->
ffffffff805a4000 D __end_init_task
ffffffff805a4000 D __nosave_begin
ffffffff805a4000 D __nosave_end
ffffffff805a4000 d mips_vdso_data
ffffffff805a8000 d vdso_data
ffffffff805ac000 D mmlist_lock
ffffffff805ac080 D tasklist_lock
Fixes: ebb5e78cc6 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Implement {get,set}_voltage_sel, list_voltage, map_voltage with
the useful regulator regmap helpers in order to be able to manage
the voltage of LAB (positive) and IBB (negative) regulators.
In particular, the supported ranges are the following:
- LAB (pos): 4600mV to 6100mV with 100mV stepping,
- IBB (neg): -7700mV to -1400mV with 100mV stepping.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210113194214.522238-2-angelogioacchino.delregno@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the BMC150 accelerometer/magnetometer was added to the device tree,
the sensors were working without specifying any regulator supplies,
likely because the regulators were on by default and then never turned off.
For some reason, this is no longer the case for pm8916_l17, which prevents
the sensors from working in some cases.
Now that the bmc150_accel/bmc150_magn drivers can enable necessary
regulators, declare the necessary regulator supplies to make the sensors
work again.
Fixes: 079f81acf1 ("arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210111175358.97171-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
warning: symbol '__i915_gem_object_create_stolen' was not declared. Should it be static?
warning: symbol '_i915_gem_object_stolen_init' was not declared. Should it be static?
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115101329.880667-1-matthew.auld@intel.com
Running cpufreq-hw driver on Lenovo Yoga C630 laptop, the following
warning messages will be seen.
[ 3.415340] cpu cpu4: Voltage update failed freq=2841600
[ 3.418755] cpu cpu4: failed to update OPP for freq=2841600
[ 3.422949] cpu cpu4: Voltage update failed freq=2956800
[ 3.427086] cpu cpu4: failed to update OPP for freq=2956800
This is because the cpufreq-hw lookup table of SDM850 provides these two
set-points, but they are missing from OPP table in DT. Let's create
sdm850.dtsi to add the OPP for them, so that the warning will be gone.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210112090640.20062-1-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the next commit where we split PWM related backlight functions from
higher-level backlight functions, we'll want to be able to retrieve the
backlight level for the current display panel from the
intel_panel_bl_funcs->setup() function using pwm_funcs->get(). Since
intel_panel_bl_funcs->setup() is called before we've fully read in the
current hardware state into our atomic state, we can't grab atomic
modesetting locks safely anyway in intel_panel_bl_funcs->setup(), and some
PWM backlight functions (vlv_get_backlight() in particular) require knowing
the currently used pipe we need to be able to discern the current display
pipe through other means. Luckily, we're already passing the current
display pipe to intel_panel_bl_funcs->setup() so all we have to do in order
to achieve this is pass down that parameter to intel_panel_bl_funcs->get().
So, fix this by accepting an additional pipe parameter in
intel_panel_bl_funcs->get(), and leave figuring out the current display
pipe up to the caller.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-2-lyude@redhat.com
Fix the ternary condition which is a bad coding style
in the kernel
I also remove the defering configuration of the nxp,phase-shift.
The configuration is now done at parsing time. It save some memory
and it's better for comprehension.
I also use the OTP default configuration when the parameter is wrong
or not specified.
I think that it's better to use the default configuration from the chip
than an arbitrary value.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Link: https://lore.kernel.org/r/20210114174714.122561-7-adrien.grassein@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This property seems useless because we can use the
regulator-max-microamp generic property to do the same
and using generic code.
As this property was already released in a kernel version,
we can't remove it, just mark it as deprecated.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Link: https://lore.kernel.org/r/20210114174714.122561-5-adrien.grassein@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This property seems useless because we can use the
regulator-max-microamp generic property to do the same
and using generic code.
As this property was already released in a kernel version,
we can't remove it, just mark it as deprecated
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Link: https://lore.kernel.org/r/20210114174714.122561-4-adrien.grassein@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
nxp,phase-shift is an enum so use enum format to describe it.
Minimum and maximum values are also wrong.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210114174714.122561-3-adrien.grassein@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if the pointer battery is null there is a null pointer
dereference on the call to power_supply_put. Fix this by only
performing the put if battery is not null.
Addresses-Coverity: ("Dereference after null check")
Fixes: 4bff91bb32 ("power: supply: cpcap-charger: Fix missing power_supply_put()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The resume operation relies on multiple transactions to synchronize
the regmap state, make sure the timeout is one order of magnitude
larger than an individual transaction, so that timeouts of failed
transactions are detected first.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210115061651.9740-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to print an error message when these ioremap operations
fail. The function that returns an error already prints an error message
and properly attributes it to the device. Drop them to save some code.
Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Cc: Srinivasa Rao <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210115034327.617223-5-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to cast away __iomem when testing with IS_ERR() or
converting with PTR_ERR(). Modern sparse can handle this just fine.
Drop it.
Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Cc: Srinivasa Rao <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210115034327.617223-4-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>