Backmerging to get a common base for merging topic branches between
drm-intel-next and drm-intel-gt-next.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
UAPI Changes:
- Deprecate I915_PMU_LAST and optimize state tracking (Tvrtko)
Avoid relying on last item ABI marker in i915_drm.h, add a
comment to mark as deprecated.
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Restore clear residuals security mitigations for Ivybridge and
Baytrail (Chris)
- Close#1858: Allow sysadmin to choose applied GPU security mitigations
through i915.mitigations=... similar to CPU (Chris)
- Fix for #2024: GPU hangs on HSW GT1 (Chris)
- Fix for #2707: Driver hang when editing UVs in Blender (Chris, Ville)
- Fix for #2797: False positive GuC loading error message (Chris)
- Fix for #2859: Missing GuC firmware for older Cometlakes (Chris)
- Lessen probability of GPU hang due to DMAR faults [reason 7,
next page table ptr is invalid] on Tigerlake (Chris)
- Fix REVID macros for TGL to fetch correct stepping (Aditya)
- Limit frequency drop to RPe on parking (Chris, Edward)
- Limit W/A 1406941453 to TGL, RKL and DG1 (Swathi)
- Make W/A 22010271021 permanent on DG1 (Lucas)
- Implement W/A 16011163337 to prevent a HS/DS hang on DG1 (Swathi)
- Only disable preemption on gen8 render engines (Chris)
- Disable arbitration around Braswell's PDP updates (Chris)
- Disable arbitration on no-preempt requests (Chris)
- Check for arbitration after writing start seqno before busywaiting (Chris)
- Retain default context state across shrinking (Venkata, CQ)
- Fix mismatch between misplaced vma check and vma insert for 32-bit
addressing userspaces (Chris, CQ)
- Propagate error for vmap() failure instead kernel NULL deref (Chris)
- Propagate error from cancelled submit due to context closure
immediately (Chris)
- Fix RCU race on HWSP tracking per request (Chris)
- Clear CMD parser shadow and GPU reloc batches (Matt A)
- Populate logical context during first pin (Maarten)
- Optimistically prune dma-resv from the shrinker (Chris)
- Fix for virtual engine ownership race (Chris)
- Remove timeslice suppression to restore fairness for virtual engines (Chris)
- Rearrange IVB/HSW workarounds properly between GT and engine (Chris)
- Taint the reset mutex with the shrinker (Chris)
- Replace direct submit with direct call to tasklet (Chris)
- Multiple corrections to virtual engine dequeue and breadcrumbs code (Chris)
- Avoid wakeref from potentially hard IRQ context in PMU (Tvrtko)
- Use raw clock for RC6 time estimation in PMU (Tvrtko)
- Differentiate OOM failures from invalid map types (Chris)
- Fix Gen9 to have 64 MOCS entries similar to Gen11 (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Remove livelock from "do_idle_maps" VT-d W/A (Chris)
- Cancel the preemption timeout early in case engine reset fails (Chris)
- Code flow optimization in the scheduling code (Chris)
- Clear the execlists timers upon reset (Chris)
- Drain the breadcrumbs just once (Chris, Matt A)
- Track the overall GT awake/busy time (Chris)
- Tweak submission tasklet flushing to avoid starvation (Chris)
- Track timelines created using the HWSP to restore on resume (Chris)
- Use cmpxchg64 for 32b compatilibity for active tracking (Chris)
- Prefer recycling an idle GGTT fence to avoid GPU wait (Chris)
- Restructure GT code organization for clearer split between GuC
and execlists (Chris, Daniele, John, Matt A)
- Remove GuC code that will remain unused by new interfaces (Matt B)
- Restructure the CS timestamp clocks code to local to GT (Chris)
- Fix error return paths in perf code (Zhang)
- Replace idr_init() by idr_init_base() in perf (Deepak)
- Fix shmem_pin_map error path (Colin)
- Drop redundant free_work worker for GEM contexts (Chris, Mika)
- Increase readability and understandability of intel_workarounds.c (Lucas)
- Defer enabling the breadcrumb interrupt to after submission (Chris)
- Deal with buddy alloc block sizes beyond 4G (Venkata, Chris)
- Encode fence specific waitqueue behaviour into the wait.flags (Chris)
- Don't cancel the breadcrumb interrupt shadow too early (Chris)
- Cancel submitted requests upon context reset (Chris)
- Use correct locks in GuC code (Tvrtko)
- Prevent use of engine->wa_ctx after error (Chris, Matt R)
- Fix build warning on 32-bit (Arnd)
- Avoid memory leak if platform would have more than 16 W/A (Tvrtko)
- Avoid unnecessary #if CONFIG_PM in PMU code (Chris, Tvrtko)
- Improve debugging output (Chris, Tvrtko, Matt R)
- Make file local variables static (Jani)
- Avoid uint*_t types in i915 (Jani)
- Selftest improvements (Chris, Matt A, Dan)
- Documentation fixes (Chris, Jose)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
# drivers/gpu/drm/i915/gt/intel_breadcrumbs_types.h
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/gvt/mmio_context.h
# drivers/gpu/drm/i915/i915_drv.h
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114152232.GA21588@jlahtine-mobl.ger.corp.intel.com
From "IMA: support for measuring kernel integrity critical data"
coverletter.
IMA measures files and buffer data such as keys, command-line arguments
passed to the kernel on kexec system call, etc. While these measurements
are necessary for monitoring and validating the integrity of the system,
they are not sufficient. Various data structures, policies, and states
stored in kernel memory also impact the integrity of the system.
Several kernel subsystems contain such integrity critical data -
e.g. LSMs like SELinux, AppArmor etc. or device-mapper targets like
dm-crypt, dm-verity, dm-integrity etc. These kernel subsystems help
protect the integrity of a system. Their integrity critical data is not
expected to change frequently during run-time. Some of these structures
cannot be defined as __ro_after_init, because they are initialized later.
For a given system, various external services/infrastructure tools
(including the attestation service) interact with it - both during the
setup and during rest of the system run-time. They share sensitive data
and/or execute critical workload on that system. The external services
may want to verify the current run-time state of the relevant kernel
subsystems before fully trusting the system with business critical
data/workload. For instance, verifying that SELinux is in "enforce" mode
along with the expected policy, disks are encrypted with a certain
configuration, secure boot is enabled etc.
This series provides the necessary IMA functionality for kernel
subsystems to ensure their configuration can be measured:
- by kernel subsystems themselves,
- in a tamper resistant way,
- and re-measured - triggered on state/configuration change.
This patch set:
- defines a new IMA hook ima_measure_critical_data() to measure
integrity critical data,
- limits the critical data being measured based on a label,
- defines a builtin critical data measurement policy,
- and includes an SELinux consumer of the new IMA critical data hook.
SELinux stores the active policy in memory, so the changes to this data
at runtime would have an impact on the security guarantees provided
by SELinux. Measuring in-memory SELinux policy through IMA subsystem
provides a secure way for the attestation service to remotely validate
the policy contents at runtime.
Measure the hash of the loaded policy by calling the IMA hook
ima_measure_critical_data(). Since the size of the loaded policy
can be large (several MB), measure the hash of the policy instead of
the entire policy to avoid bloating the IMA log entry.
To enable SELinux data measurement, the following steps are required:
1, Add "ima_policy=critical_data" to the kernel command line arguments
to enable measuring SELinux data at boot time.
For example,
BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data
2, Add the following rule to /etc/ima/ima-policy
measure func=CRITICAL_DATA label=selinux
Sample measurement of the hash of SELinux policy:
To verify the measured data with the current SELinux policy run
the following commands and verify the output hash values match.
sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1
grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6
Note that the actual verification of SELinux policy would require loading
the expected policy into an identical kernel on a pristine/known-safe
system and run the sha256sum /sys/kernel/selinux/policy there to get
the expected hash.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Define a new critical data builtin policy to allow measuring
early kernel integrity critical data before a custom IMA policy
is loaded.
Update the documentation on kernel parameters to document
the new critical data builtin policy.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The IMA hook ima_measure_critical_data() does not support a way to
specify the source of the critical data provider. Thus, the data
measurement cannot be constrained based on the data source label
in the IMA policy.
Extend the IMA hook ima_measure_critical_data() to support passing
the data source label as an input parameter, so that the policy rule can
be used to limit the measurements based on the label.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Integrity critical data may belong to a single subsystem or it may
arise from cross subsystem interaction. Currently there is no mechanism
to group or limit the data based on certain label. Limiting and
grouping critical data based on a label would make it flexible and
configurable to measure.
Define "label:=", a new IMA policy condition, for the IMA func
CRITICAL_DATA to allow grouping and limiting measurement of integrity
critical data.
Limit the measurement to the labels that are specified in the IMA
policy - CRITICAL_DATA+"label:=". If "label:=" is not provided with
the func CRITICAL_DATA, measure all the input integrity critical data.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
A new IMA policy rule is needed for the IMA hook
ima_measure_critical_data() and the corresponding func CRITICAL_DATA for
measuring the input buffer. The policy rule should ensure the buffer
would get measured only when the policy rule allows the action. The
policy rule should also support the necessary constraints (flags etc.)
for integrity critical buffer data measurements.
Add policy rule support for measuring integrity critical data.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA provides capabilities to measure file and buffer data. However,
various data structures, policies, and states stored in kernel memory
also impact the integrity of the system. Several kernel subsystems
contain such integrity critical data. These kernel subsystems help
protect the integrity of the system. Currently, IMA does not provide a
generic function for measuring kernel integrity critical data.
Define ima_measure_critical_data, a new IMA hook, to measure kernel
integrity critical data.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The original IMA buffer data measurement sizes were small (e.g. boot
command line), but the new buffer data measurement use cases have data
sizes that are a lot larger. Just as IMA measures the file data hash,
not the file data, IMA should similarly support the option for measuring
buffer data hash.
Introduce a boolean parameter to support measuring buffer data hash,
which would be much smaller, instead of the buffer itself.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA functions such as ima_match_keyring(), process_buffer_measurement(),
ima_match_policy() etc. handle data specific to keyrings. Currently,
these constructs are not generic to handle any func specific data.
This makes it harder to extend them without code duplication.
Refactor the keyring specific measurement constructs to be generic and
reusable in other measurement scenarios.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
dma-buf:
- Fix a memory leak in CMAV heap
core:
- Fix format check for legacy pageflips
ttm:
- Pass correct address to dma_mapping_error()
- Use mutex in pool shrinker
i915:
- Allow the sysadmin to override security mitigations
- Restore clear-residual mitigations for ivb/byt
- Limit VFE threads based on GT
- GVT: fix vfio edid and full display detection
- Fix DSI DSC power refcounting
- Fix LPT CPU mode backlight takeover
- Disable RPM wakeref assertions during driver shutdown
- Fix DSI sequence sleeps
amdgpu:
- Update repo location in MAINTAINERS
- Add some new renoir PCI IDs
- Revert CRC UAPI changes
- Revert OLED display fix which cases clocking problems for some systems
- Misc vangogh fixes
- GFX fix for sienna cichlid
- DCN1.0 fix for pipe split
- Fix incorrect PSP command
amdkfd:
- Fix possible out of bounds read in vcrat creation
nouveau:
- irq handling fix
- expansion ROM fix
- hw init dpcd disable
- aux semaphore owner field fix
- vram heap sizing fix
- notifier at 0 is valid fix
-----BEGIN PGP SIGNATURE-----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=hTNV
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-01-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes for rc4, a bunch of fixes across i915, amdgpu and
nouveau here, along with a couple of TTM fixes, and dma-buf and one
core pageflip/modifier interaction fix.
One notable i915 fix is a HSW GT1 regression fix that has been
outstanding for quite a while. (Thanks to Matt Turner for kicking
Intel into getting it fixed).
dma-buf:
- Fix a memory leak in CMAV heap
core:
- Fix format check for legacy pageflips
ttm:
- Pass correct address to dma_mapping_error()
- Use mutex in pool shrinker
i915:
- Allow the sysadmin to override security mitigations
- Restore clear-residual mitigations for ivb/byt
- Limit VFE threads based on GT
- GVT: fix vfio edid and full display detection
- Fix DSI DSC power refcounting
- Fix LPT CPU mode backlight takeover
- Disable RPM wakeref assertions during driver shutdown
- Fix DSI sequence sleeps
amdgpu:
- Update repo location in MAINTAINERS
- Add some new renoir PCI IDs
- Revert CRC UAPI changes
- Revert OLED display fix which cases clocking problems for some systems
- Misc vangogh fixes
- GFX fix for sienna cichlid
- DCN1.0 fix for pipe split
- Fix incorrect PSP command
amdkfd:
- Fix possible out of bounds read in vcrat creation
nouveau:
- irq handling fix
- expansion ROM fix
- hw init dpcd disable
- aux semaphore owner field fix
- vram heap sizing fix
- notifier at 0 is valid fix"
* tag 'drm-fixes-2021-01-15' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/nouveau/kms/nv50-: fix case where notifier buffer is at offset 0
drm/nouveau/mmu: fix vram heap sizing
drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields
drm/nouveau/i2c/gk110-: disable hw-initiated dpcd reads
drm/nouveau/i2c/gk110: split out from i2c/gk104
drm/nouveau/privring: ack interrupts the same way as RM
drm/nouveau/bios: fix issue shadowing expansion ROMs
drm/amd/display: Fix to be able to stop crc calculation
Revert "drm/amd/display: Expose new CRC window property"
Revert "drm/amdgpu/disply: fix documentation warnings in display manager"
Revert "drm/amd/display: Fix unused variable warning"
drm/amdgpu: set power brake sequence
drm/amdgpu: add new device id for Renior
drm/amdgpu: add green_sardine device id (v2)
drm/amdgpu: fix vram type and bandwidth error for DDR5 and DDR4
drm/amdgpu/gfx10: add updated GOLDEN_TSC_COUNT_UPPER/LOWER register offsets for VGH
drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()
Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel"
drm/amd/display: disable dcn10 pipe split by default
drm/amd/display: Add a missing DCN3.01 API mapping
...
The tracing_on option is supported by bootconfig entries, but the scripts to
convert from ftrace to a bootconfig and back were not updated.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYAEA4RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql1IAQDRIhEtOER8pCWC/MgRtX9sXgmHPtyr
OmGCbhlNNRohRQD+KKhtTORIUwqSQqItyuT/YWp7nEh25lLUC3a1LBD4Ugw=
=YZ7S
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fix from Steven Rostedt:
"Update bootconf scripts for tracing_on option
The tracing_on option is supported by bootconfig entries, but the
scripts to convert from ftrace to a bootconfig and back were not
updated"
* tag 'trace-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tools/bootconfig: Add tracing_on support to helper scripts
Add support for eh_should_retry_cmd callback in lpfc_template.
Link: https://lore.kernel.org/r/1609969748-17684-6-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add store capability to the rport port_state using sysfs under
fc_remote_ports/rport-*/port_state.
With this the user can move the port_state from Marginal->Online and
Online->Marginal.
- Marginal: This interface will set SCMD_NORETRIES_ABORT bit in
scmd->state for all the pending I/Os on the SCSI device associated with
target port.
- Online: This interface will clear SCMD_NORETRIES_ABORT bit in
scmd->state for all the pending I/Os on the SCSI device associated with
target port.
The following interface is provided to set the port state to Marginal and
Online respectively:
echo "Marginal" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state
echo "Online" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state
Link: https://lore.kernel.org/r/1609969748-17684-5-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new interface, fc_eh_should_retry_cmd(), which checks if the cmd
should be retried or not by checking the rport state. If the rport state is
marginal it returns false to make sure there won't be any retries on the
cmd.
Make the fc_remote_port_delete(), fc_user_scan_tgt(), and
fc_timeout_deleted_rport() functions handle the new rport state.
Link: https://lore.kernel.org/r/1609969748-17684-4-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new optional routine, eh_should_retry_cmd(), in scsi_host_template
that allows the transport to decide if a cmd is retryable. Return true if
the transport is in a state the cmd should be retried on.
Update scmd_eh_abort_handler() and scsi_eh_flush_done_q() to both call
scsi_eh_should_retry_cmd() to check whether the command needs to be
retried.
The above changes were based on a patch by Mike Christie.
Link: https://lore.kernel.org/r/1609969748-17684-3-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add code in scsi_result_to_blk_status to translate a new error
DID_TRANSPORT_MARGINAL to the corresponding blk_status_t i.e
BLK_STS_TRANSPORT.
Add DID_TRANSPORT_MARGINAL case to scsi_decide_disposition().
Link: https://lore.kernel.org/r/1609969748-17684-2-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the various module parameter toggles for adjusting the MQ
characteristics at boot/load time as well as a device attribute for
changing the client scsi channel request amount.
Link: https://lore.kernel.org/r/20210114203148.246656-22-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Turn on MQ by default and set sane values for the upper limit on hw queues
for the SCSI host, and number of hw SCSI channels to request from the
partner VIOS.
Link: https://lore.kernel.org/r/20210114203148.246656-21-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Grab the queue and list lock for each Sub-CRQ and add any uncompleted
events to the host purge list.
Link: https://lore.kernel.org/r/20210114203148.246656-20-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In general the client needs to send Cancel MADs and task management
commands down the same channel as the command(s) intended to cancel or
abort. The client assigns cancel keys per LUN and thus must send a Cancel
down each channel commands were submitted for that LUN. Further, the client
then must wait for those cancel completions prior to submitting a LUN RESET
or ABORT TASK SET.
Add a cancel rsp iu syncronization field to the ibmvfc_queue struct such
that the cancel routine can sync the cancel response to each queue that
requires a cancel command. Build a list of each cancel event sent and wait
for the completion of each submitted cancel.
Link: https://lore.kernel.org/r/20210114203148.246656-19-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a helper routine for initializing a Cancel MAD. This will be useful for
a channelized client that needs to send Cancel commands down every channel
commands were sent for a particular LUN.
Link: https://lore.kernel.org/r/20210114203148.246656-18-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the ibmvfc client adapter requests channels it must submit a number of
Sub-CRQ handles matching the number of channels being requested. The VIOS
in its response will overwrite the actual number of channel resources
allocated which may be less than what was requested. The client then must
store the VIOS Sub-CRQ handle for each queue. This VIOS handle is needed as
a parameter with h_send_sub_crq().
Link: https://lore.kernel.org/r/20210114203148.246656-17-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the client has negotiated the use of channels all vfcFrames are
required to go down a Sub-CRQ channel or it is a protocoal violation. If
the adapter state is channelized submit vfcFrames to the appropriate
Sub-CRQ via the h_send_sub_crq() helper.
Link: https://lore.kernel.org/r/20210114203148.246656-16-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jiri Olsa says:
====================
hi,
adding the support to have buildid stored in mmap2 event,
so we can bypass the final perf record hunt on build ids.
This patchset allows perf to record build ID in mmap2 event,
and adds perf tooling to store/download binaries to .debug
cache based on these build IDs.
Note that the build id retrieval code is stolen from bpf
code, where it's been used (together with file offsets)
to replace IPs in user space stack traces. It's now added
under lib directory.
v7 changes:
- included only missing kernel patches, cc-ed bpf@vger and
rebased on bpf-next/master [Alexei]
v6 changes:
- last 4 patches rebased Arnaldo's perf/core
v5 changes:
- rebased on latest perf/core
- several patches already pulled in
- fixed trace+probe_vfs_getname.sh output redirection
- fixed changelogs [Arnaldo]
- renamed BUILD_ID_SIZE to BUILD_ID_SIZE_MAX [Song]
v4 changes:
- fixed typo in changelog [Namhyung]
- removed force_download bool from struct dso_store_data,
because it's not used [Namhyung]
v3 changes:
- added acks
- removed forgotten debug code [Arnaldo]
- fixed readlink termination [Ian]
- fixed doc for --debuginfod=URLs [Ian]
- adopted kernel's memchr_inv function and used
it in build_id__is_defined function [Arnaldo]
On recording server:
- on the recording server we can run record with --buildid-mmap
option to store build ids in mmap2 events:
# perf record --buildid-mmap
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.836 MB perf.data ]
- it stores nothing to ~/.debug cache:
# find ~/.debug
find: ‘/root/.debug’: No such file or directory
- and still reports properly:
# perf report --stdio
...
99.82% swapper [kernel.kallsyms] [k] native_safe_halt
0.03% swapper [kernel.kallsyms] [k] finish_task_switch
0.02% swapper [kernel.kallsyms] [k] __softirqentry_text_start
0.01% kcompactd0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
0.01% ksoftirqd/6 [kernel.kallsyms] [k] slab_free_freelist_hook
0.01% kworker/17:1H-x [kernel.kallsyms] [k] slab_free_freelist_hook
- display used/hit build ids:
# perf buildid-list | head -5
5dcec522abf136fcfd3128f47e131f2365834dd7 /proc/kcore
589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
40da7abe89f631f60538a17686a7d65c6a02ed31 /usr/lib64/ld-2.30.so
- store build id binaries into build id cache:
# perf buildid-cache -a perf.data
OK 5dcec522abf136fcfd3128f47e131f2365834dd7 /proc/kcore
OK 589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
OK 94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
OK 559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
OK 40da7abe89f631f60538a17686a7d65c6a02ed31 /usr/lib64/ld-2.30.so
OK a674f7a47c78e35a088104647b9640710277b489 /usr/sbin/sshd
OK e5cb4ca25f46485bdbc691c3a92e7e111dac3ef2 /usr/bin/bash
OK 9bc8589108223c944b452f0819298a0c3cba6215 /usr/bin/find
# find ~/.debug | head -5
/root/.debug
/root/.debug/proc
/root/.debug/proc/kcore
/root/.debug/proc/kcore/5dcec522abf136fcfd3128f47e131f2365834dd7
/root/.debug/proc/kcore/5dcec522abf136fcfd3128f47e131f2365834dd7/kallsyms
- run debuginfod daemon to provide binaries to another server (below)
(the initialization could take some time)
# debuginfod -F /
On another server:
- copy perf.data from 'record' server and run:
$ find ~/.debug/
find: ‘/home/jolsa/.debug/’: No such file or directory
$ perf buildid-list | head -5
No kallsyms or vmlinux with build-id 5dcec522abf136fcfd3128f47e131f2365834dd7 was found
5dcec522abf136fcfd3128f47e131f2365834dd7 [kernel.kallsyms]
5784f813b727a50cfd3363234aef9fcbab685cc4 /lib/modules/5.10.0-rc2speed+/kernel/fs/xfs/xfs.ko
589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
- report does not show anything (kernel build id does not match):
$ perf report --stdio
...
76.73% swapper [kernel.kallsyms] [k] 0xffffffff81aa8ebe
1.89% find [kernel.kallsyms] [k] 0xffffffff810f2167
0.93% sshd [kernel.kallsyms] [k] 0xffffffff8153380c
0.83% swapper [kernel.kallsyms] [k] 0xffffffff81104b0b
0.71% kworker/u40:2-e [kernel.kallsyms] [k] 0xffffffff810f3850
0.70% kworker/u40:0-e [kernel.kallsyms] [k] 0xffffffff810f3850
0.64% find [kernel.kallsyms] [k] 0xffffffff81a9ba0a
0.63% find [kernel.kallsyms] [k] 0xffffffff81aa93b0
- add build ids does not work, because existing binaries (on another server)
have different build ids:
$ perf buildid-cache -a perf.data
No kallsyms or vmlinux with build-id 5dcec522abf136fcfd3128f47e131f2365834dd7 was found
FAIL 5dcec522abf136fcfd3128f47e131f2365834dd7 [kernel.kallsyms]
FAIL 5784f813b727a50cfd3363234aef9fcbab685cc4 /lib/modules/5.10.0-rc2speed+/kernel/fs/xfs/xfs.ko
FAIL 589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
FAIL 94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
FAIL 559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
FAIL 40da7abe89f631f60538a17686a7d65c6a02ed31 /usr/lib64/ld-2.30.so
FAIL a674f7a47c78e35a088104647b9640710277b489 /usr/sbin/sshd
FAIL e5cb4ca25f46485bdbc691c3a92e7e111dac3ef2 /usr/bin/bash
FAIL 9bc8589108223c944b452f0819298a0c3cba6215 /usr/bin/find
- add build ids with debuginfod setup pointing to record server:
$ perf buildid-cache -a perf.data --debuginfod http://192.168.122.174:8002
No kallsyms or vmlinux with build-id 5dcec522abf136fcfd3128f47e131f2365834dd7 was found
OK 5dcec522abf136fcfd3128f47e131f2365834dd7 [kernel.kallsyms]
OK 5784f813b727a50cfd3363234aef9fcbab685cc4 /lib/modules/5.10.0-rc2speed+/kernel/fs/xfs/xfs.ko
OK 589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
OK 94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
OK 559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
OK 40da7abe89f631f60538a17686a7d65c6a02ed31 /usr/lib64/ld-2.30.so
OK a674f7a47c78e35a088104647b9640710277b489 /usr/sbin/sshd
OK e5cb4ca25f46485bdbc691c3a92e7e111dac3ef2 /usr/bin/bash
OK 9bc8589108223c944b452f0819298a0c3cba6215 /usr/bin/find
- and report works:
$ perf report --stdio
...
76.73% swapper [kernel.kallsyms] [k] native_safe_halt
1.91% find [kernel.kallsyms] [k] queue_work_on
0.93% sshd [kernel.kallsyms] [k] iowrite16
0.83% swapper [kernel.kallsyms] [k] finish_task_switch
0.72% kworker/u40:2-e [kernel.kallsyms] [k] process_one_work
0.70% kworker/u40:0-e [kernel.kallsyms] [k] process_one_work
0.64% find [kernel.kallsyms] [k] syscall_enter_from_user_mode
0.63% find [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
- because we have the data in build id cache:
$ find ~/.debug | head -10
.../.debug
.../.debug/home
.../.debug/home/jolsa
.../.debug/home/jolsa/.cache
.../.debug/home/jolsa/.cache/debuginfod_client
.../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7
.../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7/executable
.../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7/executable/5dcec522abf136fcfd3128f47e131f2365834dd7
.../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7/executable/5dcec522abf136fcfd3128f47e131f2365834dd7/elf
.../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7/executable/5dcec522abf136fcfd3128f47e131f2365834dd7/debug
Available also in:
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
perf/build_id
thanks,
jirka
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to carry build id data in mmap2 event.
The build id data replaces maj/min/ino/ino_generation
fields, which are also used to identify map's binary,
so it's ok to replace them with build id data:
union {
struct {
u32 maj;
u32 min;
u64 ino;
u64 ino_generation;
};
struct {
u8 build_id_size;
u8 __reserved_1;
u16 __reserved_2;
u8 build_id[20];
};
};
Replaced maj/min/ino/ino_generation fields give us size
of 24 bytes. We use 20 bytes for build id data, 1 byte
for size and rest is unused.
There's new misc bit for mmap2 to signal there's build
id data in it:
#define PERF_RECORD_MISC_MMAP_BUILD_ID (1 << 14)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-4-jolsa@kernel.org
It's possible to have other build id types (other than default SHA1).
Currently there's also ld support for MD5 build id.
Adding size argument to build_id_parse function, that returns (if defined)
size of the parsed build id, so we can recognize the build id type.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-3-jolsa@kernel.org
Moving stack_map_get_build_id into lib with
declaration in linux/buildid.h header:
int build_id_parse(struct vm_area_struct *vma, unsigned char *build_id);
This function returns build id for given struct vm_area_struct.
There is no functional change to stack_map_get_build_id function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-2-jolsa@kernel.org
Extract the hwq id from a SCSI command and store it in the ibmvfc_event
structure to identify which Sub-CRQ to send the command down when channels
are being utilized.
Link: https://lore.kernel.org/r/20210114203148.246656-15-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previous patches have plumbed the necessary Sub-CRQ interface and channel
negotiation MADs to fully channelize via hardware backed queues.
Advertise client support via NPIV Login capability IBMVFC_CAN_USE_CHANNELS
when the client bits have MQ enabled via vhost->mq_enabled, or when
channels were already in use during a subsequent NPIV Login. The later is
required because channel support is only renegotiated after a CRQ pair is
broken. Simple NPIV Logout/Logins require the client to continue to
advertise the channel capability until the CRQ pair between the client is
broken.
Link: https://lore.kernel.org/r/20210114203148.246656-14-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
New NPIV_ENQUIRY_CHANNEL and NPIV_SETUP_CHANNEL management datagrams (MADs)
were defined in a previous patchset. If the client advertises a desire to
use channels and the partner VIOS is channel capable then the client must
proceed with channel enquiry to determine the maximum number of channels
the VIOS is capable of providing, and registering SubCRQs via channel setup
with the VIOS immediately following NPIV Login. This handshaking should not
be performed for subsequent NPIV Logins unless the CRQ connection has been
reset.
Implement these two new MADs and issue them following a successful NPIV
login where the VIOS has set the SUPPORT_CHANNELS capability bit in the
NPIV Login response.
Link: https://lore.kernel.org/r/20210114203148.246656-13-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create an irq mapping for the hw_irq number provided from phyp firmware.
Request an irq assigned our Sub-CRQ interrupt handler. Unmap these irqs at
Sub-CRQ teardown.
Link: https://lore.kernel.org/r/20210114203148.246656-12-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simple handler that calls Sub-CRQ drain routine directly.
Link: https://lore.kernel.org/r/20210114203148.246656-11-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The logic for iterating over the Sub-CRQ responses is similiar to that of
the primary CRQ. Add the necessary handlers for processing those responses.
Link: https://lore.kernel.org/r/20210114203148.246656-10-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Each Sub-CRQ has its own interrupt. A hypercall is required to toggle the
IRQ state. Provide the necessary mechanism via a helper function.
Link: https://lore.kernel.org/r/20210114203148.246656-9-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allocate a set of Sub-CRQs in advance. During channel setup the client and
VIOS negotiate the number of queues the VIOS supports and the number that
the client desires to request. Its possible that the final channel
resources allocated is less than requested, but the client is still
responsible for sending handles for every queue it is hoping for.
Also, provide deallocation cleanup routines.
Link: https://lore.kernel.org/r/20210114203148.246656-8-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Subordinate Command Response Queues (Sub CRQ) are used in conjunction with
the primary CRQ when more than one queue is needed by the virtual I/O
adapter. Recent phyp firmware versions support Sub CRQ's with ibmvfc
adapters. This feature is a prerequisite for supporting multiple hardware
backed submission queues in the vfc adapter.
The Sub CRQ command element differs from the standard CRQ in that it is
32bytes long as opposed to 16bytes for the latter. Despite this extra
16bytes the ibmvfc protocol will use the original CRQ command element
mapped to the first 16bytes of the Sub CRQ element initially.
Add definitions for the Sub CRQ command element and queue.
Link: https://lore.kernel.org/r/20210114203148.246656-7-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sub-CRQs are registred with firmware via a hypercall. Abstract that
interface into a simpler helper function.
Link: https://lore.kernel.org/r/20210114203148.246656-6-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With the upcoming addition of Sub-CRQs the event pool size may vary
per-queue.
Add a size parameter to ibmvfc_init_event_pool() such that different size
event pools can be requested by ibmvfc_alloc_queue().
Link: https://lore.kernel.org/r/20210114203148.246656-5-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The event pool and CRQ used to be separate entities of the adapter host
structure and as such were allocated and freed independently of each
other. Recent work as defined a generic queue structure with an event pool
specific to each queue. As such the event pool for each queue shouldn't be
allocated/freed independently, but instead performed as part of the queue
allocation/free routines.
Move the calls to ibmvfc_event_pool_{init|free} into
ibmvfc_{alloc|free}_queue respectively. The only functional change here is
that the CRQ cannot be released in ibmvfc_remove until after the event pool
has been successfully purged since releasing the queue will also free the
event pool.
Link: https://lore.kernel.org/r/20210114203148.246656-4-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The next patch in this series reworks the event pool allocation calls to
happen within the individual queue allocation routines instead of as
independent calls.
Move the init/free routines earlier in ibmvfc.c to prevent undefined
reference errors when calling these functions from the queue allocation
code. No functional change.
Link: https://lore.kernel.org/r/20210114203148.246656-3-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce several new vhost fields for managing MQ state of the adapter as
well as initial defaults for MQ enablement.
Link: https://lore.kernel.org/r/20210114203148.246656-2-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As requested, here's a tree with the non-Ampere-specific fixes split
out, as most of them are potentially relevant to already-supported
GPUs.
- irq handling fix
- expansion ROM fix
- hw init dpcd disable
- aux semaphore owner field fix
- vram heap sizing fix
- notifier at 0 is valid fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4P90mcF_ByAh+ghz+ZVD2N2bPbD7xHYYArE1kYrvsGcQ@mail.gmail.com
User layer may access sysfs nodes when system PM ops or error handling is
running. This can cause various problems. Rename eh_sem to host_sem and use
it to protect PM ops and error handling from user layer intervention.
Link: https://lore.kernel.org/r/1610594010-7254-3-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During system resume/suspend, hba could be NULL. In this case, do not touch
eh_sem.
Fixes: 88a92d6ae4 ("scsi: ufs: Serialize eh_work with system PM events and async scan")
Link: https://lore.kernel.org/r/1610594010-7254-2-git-send-email-cang@codeaurora.org
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>