MEC2_JT is not supported
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The macro is for memory mapped by GPU as uncached.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support new cache coherence HW on A+A platform mainly in KFD.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran is using jpeg2.6, and the main change is jpeg2.6 using
AMDGPU_MMHUB_0, and jpeg2.5 using AMDGPU_MMHUB_1.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran should be the same as Arcturus in the PTE SNOOPED bit handling.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Client ID 26 is reserved. Add it to the table.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran is using vcn2.6, and the main change is vcn2.6 using
AMDGPU_MMHUB_0, and vcn2.5 using AMDGPU_MMHUB_1
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
including firmware support etc.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently host-gpu io link is always reported as PCIe however, on some
A+A systems, there could be one xgmi link available. This change exposes
xgmi link via sysfs when it is present.
v2: fix includes (Alex)
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran uses registers defined in header gc_9_4_2 but much of the xgmi
related functionality can be obtained by reusing the exisitng definition
from gfxhub_v1_1_get_xgmi_info. While adding support for Aldebaran, also
refactored code to better handle the new scenario.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This applies to AMD Accelerated Processing Platforms that support host
gpu interconnect throguh a special link (xgmi). Aldebaran systems will
support this special feature for utilizing the benefits of host-gpu
cache coherence. This change outlines the basic framework for mapping
the GPU VRAM (HBM) to system address space making it accesible to the
host but managed by the amdgpu driver since this region is marked as
reserved memory in host address space by the underlying system firmware.
v2: switch to smuio callback function to check the type
of host-gpu interface (Hawking)
v3: use hub callbacks rather than direct function calls (Alex)
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Like its predecessors Aldebran also supports advanced high bandwidth
GPU-GPU communication interface known as xgmi. This enables the basic
xgmi support while refactoring the code slightly.
Detection of xgmi link between host cpu and gpu will be introduced in a
different patch.
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran will use smuio v13_0 callbacks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
is_host_gpu_xgmi_supported is used to query gpu and
cpu/host link type. get_die_id is used to query die
ids.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add psp v13 ip block to soc ip init list for aldebaran
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ALDEBARAN doesn't need these golden settings.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV pf/vf function identifier regsiter in aldebaran
is the same as the one in arcturus
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW should be loaded before any operation that
may toggling DF-Cstate. otherwsie, tOS has no
choice but to locally toggle DF Cstate (i.e.
disable DF-Cstate even it already enabled by VBIOS)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmRCC_DEV0_EPF0_STRAP0 offset in aldebaran is changed
from arcturus
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialze psp ip function for aldebaran
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callback functions for psp_v13 ring
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callback function to support trusted os
loading for psp v13
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callback function to support sys_drv firmware
loading for psp v13
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callback function to support key database firmware
loading for psp v13
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize sos microcode for aldebaran
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This gives more information and improves productivity.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
netdev_wait_allrefs() issues a warning if refcount does not drop to 0
after 10 seconds. While 10 second wait generally should not happen
under normal workload in normal environment, it seems to fire falsely
very often during fuzzing and/or in qemu emulation (~10x slower).
At least it's not possible to understand if it's really a false
positive or not. Automated testing generally bumps all timeouts
to very high values to avoid flake failures.
Add net.core.netdev_unregister_timeout_secs sysctl to make
the timeout configurable for automated testing systems.
Lowering the timeout may also be useful for e.g. manual bisection.
The default value matches the current behavior.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=211877
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
vhca_event.h has been included at line 4, so remove the
duplicate one at line 8.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
indir_table.h has been included at line 41, so remove
the duplicate one at line 43.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible for a 32 bit x86 build to use a 64 bit DMA address.
There are two remaining spots where the IPA driver does a modulo
operation to check alignment of a DMA address, and under certain
conditions this can lead to a build error on i386 (at least).
The alignment checks we're doing are for power-of-2 values, and this
means the lower 32 bits of the DMA address can be used. This ensures
both operands to the modulo operator are 32 bits wide.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-03-23
This series contains updates to ice, fm10k, i40e, iavf, ixgbe, ixgbevf,
igb, e1000e, and e1000 drivers.
Tony fixes prototype warnings for mismatched header for ice driver.
Sasha fixes prototype warnings for mismatched header for igc and e1000e
driver.
Jesse fixes prototype warnings for mismatched header for the remaining
Intel drivers: fm10k, i40e, iavf, igb, ixgbe, and ixgbevf.
Gustavo A. R. Silva explicitly adds a break instead of falling through
in preparation of -Wimplicit-fallthrough for Clang to ice, fm10k,
ixgbe, igb, ixgbevf, and e1000 drivers,
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the display-specific usage of INTEL_GEN, while leaving the
non-display usage as-is for now.
In the near-future we'll probably want to think about moving display
interrupt handling to its own file under the display/ directory.
v2:
- Use new IS_DISPLAY_VER() macro.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-6-matthew.d.roper@intel.com
Although most of the code in this file is display-related (watermarks),
there's some functions that are not (e.g., clock gating). Thus we need
to do the conversions to DISPLAY_VER() manually here rather than using
Coccinelle.
In the near-future we'll probably want to think about moving watermark
logic out of intel_pm.c and into watermark-specific files under the
display/ directory.
v2:
- Use new IS_DISPLAY_VER macro where appropriate.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-5-matthew.d.roper@intel.com
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:
@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)
@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)
There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.
v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
Although we've long referred to platforms by a single "GEN" number, the
hardware teams have recommended that we stop doing this since the
various component IP blocks are going to start using independent number
schemes with varying cadence. To support this, hardware platforms a bit
down the road are going to start providing MMIO registers that the
driver can read to obtain the "graphics version," "media version," and
"display version" without needing to do a PCI ID -> platform -> version
translation.
Although our current platforms don't yet expose these registers (and the
next couple we release probably won't have them yet either), the
hardware teams would still like to see us move to this independent
numbering scheme now in preparation. For i915 that means we should try
to eliminate all usage of INTEL_GEN() throughout our code and instead
replace it with separate GRAPHICS_VER(), MEDIA_VER(), and DISPLAY_VER()
constructs in the code. For old platforms, these will all usually give
the same value for each IP block (aside from a few special cases like
GLK which we can no more accurately represent as graphics=9 +
display=10), but future platforms will have more flexibility to bump IP
version numbers independently.
The upcoming ADL-P platform will have a display version of 13 and a
graphics version of 12, so let's just the first step of breaking out
DISPLAY_VER(), but leaving the rest of INTEL_GEN() untouched for now.
For now we'll automatically derive the display version from the
platform's INTEL_GEN() value except in cases where an alternative
display version is explicitly provided in the device info structure.
We also add some helper macros IS_DISPLAY_VER(i915, ver) and
IS_DISPLAY_RANGE(i915, from, until) that match the behavior of the
existing gen-based macros. However unlike IS_GEN(), we will implement
those macros with direct comparisons rather than trying to maintain a
mask to help compiler optimization. In practice the optimization winds
up not being used in very many places (since the vast majority of our
platform checks are of the form "gen >= x") so there is pretty minimal
size reduction in the final driver binary[1]. We're also likely going
to need to extend these version numbers to non-integer major.minor
values at some point in the future, so the mask approach won't work at
all once we get to platforms like that.
[1] The results before/after the next patch in this series, which
switches our code over to the new display macros:
$ size i915.ko.{orig,new}
text data bss dec hex filename
2940291 102944 5384 3048619 2e84ab i915.ko.orig
2940723 102956 5384 3049063 2e8667 i915.ko.new
v2:
- Move version into device info's display sub-struct. (Jani)
- Add extra parentheses to macros. (Jani)
- Note the lack of genmask optimization in the display-based macros and
give size data. (Lucas)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-3-matthew.d.roper@intel.com
ILK is the only platform that we consider "gen5" and SNB is the only
platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then
replace numeric platform tests for these two generations with direct
platform tests with the following Coccinelle semantic patch:
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 5)
+ IS_IRONLAKE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 6)
+ IS_SANDYBRIDGE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN_RANGE(dev_priv, 5, 6)
+ IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv)
This will simplify our upcoming patches which eliminate INTEL_GEN()
usage in the display code.
v2:
- Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville)
- Rebase + regenerate from semantic patch
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
Add an injection file in order to specify the IPID too when injecting
an error. One use case example is using the machinery to decode MCEs
collected from other machines.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210314201806.12798-1-bp@alien8.de
Vladimir Oltean says:
====================
Better support for sandwiched LAGs with bridge and DSA
Changes in v4:
- Added missing EXPORT_SYMBOL_GPL
- Using READ_ONCE(fdb->dst)
- Split patches into (a) adding the bridge helpers (b) making DSA use them
- br_mdb_replay went back to the v1 approach where it allocated memory
in atomic context
- Created a br_switchdev_mdb_populate which reduces some of the code
duplication
- Fixed the error message in dsa_port_clear_brport_flags
- Replaced "dsa_port_vlan_filtering(dp, br, extack)" with
"dsa_port_vlan_filtering(dp, br_vlan_enabled(br), extack)" (duh)
- Added review tags (sorry if I missed any)
The objective of this series is to make LAG uppers on top of switchdev
ports work regardless of which order we link interfaces to their masters
(first make the port join the LAG, then the LAG join the bridge, or the
other way around).
There was a design decision to be made in patches 2-4 on whether we
should adopt the "push" model (which attempts to solve the problem
centrally, in the bridge layer) where the driver just calls:
switchdev_bridge_port_offloaded(brport_dev,
&atomic_notifier_block,
&blocking_notifier_block,
extack);
and the bridge just replays the entire collection of switchdev port
attributes and objects that it has, in some predefined order and with
some predefined error handling logic;
or the "pull" model (which attempts to solve the problem by giving the
driver the rope to hang itself), where the driver, apart from calling:
switchdev_bridge_port_offloaded(brport_dev, extack);
has the task of "dumpster diving" (as Tobias puts it) through the bridge
attributes and objects by itself, by calling:
- br_vlan_replay
- br_fdb_replay
- br_mdb_replay
- br_vlan_enabled
- br_port_flag_is_set
- br_port_get_stp_state
- br_multicast_router
- br_get_ageing_time
(not necessarily all of them, and not necessarily in this order, and
with driver-defined error handling).
Even though I'm not in love myself with the "pull" model, I chose it
because there is a fundamental trick with replaying switchdev events
like this:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0 <- this will replay the objects once for
the bond0 bridge port, and the swp0
switchdev port will process them
ip link set swp1 master bond0 <- this will replay the objects again for
the bond0 bridge port, and the swp1
switchdev port will see them, but swp0
will see them for the second time now
Basically I believe that it is implementation defined whether the driver
wants to error out on switchdev objects seen twice on a port, and the
bridge should not enforce a certain model for that. For example, for FDB
entries added to a bonding interface, the underling switchdev driver
might have an abstraction for just that: an FDB entry pointing towards a
logical (as opposed to physical) port. So when the second port joins the
bridge, it doesn't realy need to replay FDB entries, since there is
already at least one hardware port which has been receiving those
events, and the FDB entries don't need to be added a second time to the
same logical port.
In the other corner, we have the drivers that handle switchdev port
attributes on a LAG as individual switchdev port attributes on physical
ports (example: VLAN filtering). In fact, the switchdev_handle_port_attr_set
helper facilitates this: it is a fan-out from a single orig_dev towards
multiple lowers that pass the check_cb().
But that's the point: switchdev_handle_port_attr_set is just a helper
which the driver _opts_ to use. The bridge can't enforce the "push"
model, because that would assume that all drivers handle port attributes
in the same way, which is probably false.
For this reason, I preferred to go with the "pull" mode for this patch
set. Just to see how bad it is for other switchdev drivers to copy-paste
this logic, I added the pull support to ocelot too, and I think it's
pretty manageable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The premise of this change is that the switchdev port attributes and
objects offloaded by ocelot might have been missed when we are joining
an already existing bridge port, such as a bonding interface.
The patch pulls these switchdev attributes and objects from the bridge,
on behalf of the 'bridge port' net device which might be either the
ocelot switch interface, or the bonding upper interface.
The ocelot_net.c belongs strictly to the switchdev ocelot driver, while
ocelot.c is part of a library shared with the DSA felix driver.
The ocelot_port_bridge_leave function (part of the common library) used
to call ocelot_port_vlan_filtering(false), something which is not
necessary for DSA, since the framework deals with that already there.
So we move this function to ocelot_switchdev_unsync, which is specific
to the switchdev driver.
The code movement described above makes ocelot_port_bridge_leave no
longer return an error code, so we change its type from int to void.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the DSA situation, ocelot supports LAG offload but treats
this scenario improperly:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
We do the same thing as we do there, which is to simulate a 'bridge join'
on 'lag join', if we detect that the bonding upper has a bridge upper.
Again, same as DSA, ocelot supports software fallback for LAG, and in
that case, we should avoid calling ocelot_netdevice_changeupper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we join an already-created bridge port, such as a bond master
interface, then we can miss the initial switchdev notifications emitted
by the bridge for this port, while it wasn't offloaded by anybody.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA currently assumes that the bridge port starts off with this
constellation of bridge port flags:
- learning on
- unicast flooding on
- multicast flooding on
- broadcast flooding on
just by virtue of code copy-pasta from the bridge layer (new_nbp).
This was a simple enough strategy thus far, because the 'bridge join'
moment always coincided with the 'bridge port creation' moment.
But with sandwiched interfaces, such as:
br0
|
bond0
|
swp0
it may happen that the user has had time to change the bridge port flags
of bond0 before enslaving swp0 to it. In that case, swp0 will falsely
assume that the bridge port flags are those determined by new_nbp, when
in fact this can happen:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set bond0 type bridge_slave learning off
ip link set swp0 master br0
Now swp0 has learning enabled, bond0 has learning disabled. Not nice.
Fix this by "dumpster diving" through the actual bridge port flags with
br_port_flag_is_set, at bridge join time.
We use this opportunity to split dsa_port_change_brport_flags into two
distinct functions called dsa_port_inherit_brport_flags and
dsa_port_clear_brport_flags, now that the implementation for the two
cases is no longer similar. This patch also creates two functions called
dsa_port_switchdev_sync and dsa_port_switchdev_unsync which collect what
we have so far, even if that's asymmetrical. More is going to be added
in the next patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a pretty noisy change that was broken out of the larger change
for replaying switchdev attributes and objects at bridge join time,
which is when these extack objects are actually used.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA can properly detect and offload this sequence of operations:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set swp0 master bond0
ip link set bond0 master br0
But not this one:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
Actually the second one is more complicated, due to the elapsed time
between the enslavement of bond0 and the offloading of it via swp0, a
lot of things could have happened to the bond0 bridge port in terms of
switchdev objects (host MDBs, VLANs, altered STP state etc). So this is
a bit of a can of worms, and making sure that the DSA port's state is in
sync with this already existing bridge port is handled in the next
patches.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently this simple setup with DSA:
ip link add br0 type bridge vlan_filtering 1
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
will not work because the bridge has created the PVID in br_add_if ->
nbp_vlan_init, and it has notified switchdev of the existence of VLAN 1,
but that was too early, since swp0 was not yet a lower of bond0, so it
had no reason to act upon that notification.
We need a helper in the bridge to replay the switchdev VLAN objects that
were notified since the bridge port creation, because some of them may
have been missed.
As opposed to the br_mdb_replay function, the vg->vlan_list write side
protection is offered by the rtnl_mutex which is sleepable, so we don't
need to queue up the objects in atomic context, we can replay them right
away.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a switchdev port starts offloading a LAG that is already in a
bridge and has an FDB entry pointing to it:
ip link set bond0 master br0
bridge fdb add dev bond0 00:01:02:03:04:05 master static
ip link set swp0 master bond0
the switchdev driver will have no idea that this FDB entry is there,
because it missed the switchdev event emitted at its creation.
Ido Schimmel pointed this out during a discussion about challenges with
switchdev offloading of stacked interfaces between the physical port and
the bridge, and recommended to just catch that condition and deny the
CHANGEUPPER event:
https://lore.kernel.org/netdev/20210210105949.GB287766@shredder.lan/
But in fact, we might need to deal with the hard thing anyway, which is
to replay all FDB addresses relevant to this port, because it isn't just
static FDB entries, but also local addresses (ones that are not
forwarded but terminated by the bridge). There, we can't just say 'oh
yeah, there was an upper already so I'm not joining that'.
So, similar to the logic for replaying MDB entries, add a function that
must be called by individual switchdev drivers and replays local FDB
entries as well as ones pointing towards a bridge port. This time, we
use the atomic switchdev notifier block, since that's what FDB entries
expect for some reason.
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>