Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement the ops named get_dev_fw_str to support ib_get_device_fw_str().
Link: https://lore.kernel.org/r/1615882161-53827-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to create the ODP EQ if the user doesn't use ODP MRs.
Hence, create it only when the first ODP MR is created. This EQ will be
destroyed only when the device is unloaded.
This will decrease the number of EQs created per device. for example: If
we creates 1K devices (SF/VF/etc'), than we will decrease the num of EQs
by 1K.
Link: https://lore.kernel.org/r/20210314125418.179716-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The debugfs directory '/sys/kernel/debug/energy_model' is needed before
the Energy Model registration can happen. With the recent change in
debugfs subsystem it's not allowed to create this directory at early
stage (core_initcall). Thus creating this directory would fail.
Postpone the creation of the EM debug dir to later stage: fs_initcall.
It should be safe since all clients: CPUFreq drivers, Devfreq drivers
will be initialized in later stages.
The custom debug log below prints the time of creation the EM debug dir
at fs_initcall and successful registration of EMs at later stages.
[ 1.505717] energy_model: creating rootdir
[ 3.698307] cpu cpu0: EM: created perf domain
[ 3.709022] cpu cpu1: EM: created perf domain
Fixes: 56348560d4 ("debugfs: do not attempt to create a new file before the filesystem is initalized")
Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For convenience, add empty stubs of library functions defined in
cppc_acpi.c for the CONFIG_ACPI_CPPC_LIB unset case.
Because one of them needs to return CPUFREQ_ETERNAL, include
linux/cpufreq.h into the CPPC library header file and drop the
direct inclusion of it from cppc_acpi.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Notice that some computations related to frequency in intel_pstate
can be simplified if (a) intel_pstate_get_hwp_max() updates the
relevant members of struct cpudata by itself and (b) the "turbo
disabled" check is moved from it to its callers, so modify the code
accordingly and while at it rename intel_pstate_get_hwp_max() to
intel_pstate_get_hwp_cap() which better reflects its purpose and
provide a simplified variat of it, __intel_pstate_get_hwp_cap(),
suitable for the initialization path.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
According to the ACPI specification (section 7.2.2 in ACPI 6.4), the
OS may evaluate the _OFF method of a power resource that is "off"
already [1], and in particular that can be done in the case of unused
power resources.
Accordingly, modify acpi_turn_off_unused_power_resources() to
evaluate the _OFF method for each of the unused power resources
unconditionally which may help to work around BIOS issues where the
return value of _STA for a power resource does not reflect the
actual state of the power resource [2].
Link: https://uefi.org/specs/ACPI/6.4/07_Power_and_Performance_Mgmt/declaring-a-power-resource-object.html#off # [1]
Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/ # [2]
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two variants of the Jetson Xavier NX platform; one has an
eMMC and one as a micro SD-card slot. The SDHCI controller used by
each variant is different, however, the current device-tree for both
Xavier NX boards have the same SDHCI controller defined as 'mmc0' in
the device-tree alias node. Fix this by correcting the 'mmc0' alias
for the SD-card variant.
Fixes: 3f9efbbe57 ("arm64: tegra: Add support for Jetson Xavier NX")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 5d25c476f2 ("Revert "arm64: tegra: Disable the ACONNECT for
Jetson TX2"") re-enabled the Tegra ADMA and ACONNECT drivers to support
audio on Jetson TX2. However, this revert was dependent upon commit
e590474768 ("driver core: Set fw_devlink=on by default") and without
this commit, enabling the ACONNECT is causing resume from system suspend
to fail on Jetson TX2. Resume fails because the ACONNECT driver is being
resumed before the BPMP driver, and the ACONNECT driver is attempting to
power on a power-domain that is provided by the BPMP.
Commit e590474768 ("driver core: Set fw_devlink=on by default") has
since been temporarily reverted while some issues are being
investigated. This is causing resume from system suspend on Jetson TX2
to fail again. Rather than disable the ACONNECT driver again, fix this
by setting fw_devlink is set to 'on' for Jetson TX2 in the bootargs
specified in device-tree.
Fixes: 5d25c476f2 ("Revert arm64: tegra: Disable the ACONNECT for Jetson TX2")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ACONNECT device tree node has a unit-address on all other SoC
generations and there's really no reason not to have it on Tegra186.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding a couple of break statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A bunch of header comments were showing warnings when compiling
with W=1. Fix them all at once. This changes only comments.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Correct reported warnings for "warning: expecting prototype for ...
Prototype was for ... instead"
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Just another drive-by fix I noticed while going through the tree to cleanup
DP aux adapter registration - make sure we unregister the DP AUX dev if
analogix_dp_probe() fails.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-14-lyude@redhat.com
Another drive-by fix I found when fixing DP AUX adapter across the kernel
tree - make sure we don't leak resources (and by proxy-AUX adapters) on
failures in anx6345_bridge_attach() by unrolling on errors.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-13-lyude@redhat.com
Another case of linking an encoder to a connector after the connector's
been registered. The proper place to do this is before connector
registration, so let's fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-12-lyude@redhat.com
Just another issue I noticed while correcting usages of
drm_dp_aux_init()/drm_dp_aux_register() around the tree. If any of the
steps in anx78xx_bridge_attach() fail, we end up leaking resources. So,
let's fix that (and fix leaking a DP AUX adapter in the process) by
unrolling on errors.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-10-lyude@redhat.com
Since encoder mappings for connectors are exposed to userspace, we should
be attaching the encoder before exposing the connector to userspace. Just a
drive-by fix for an issue I noticed while fixing up usages of
drm_dp_aux_init()/drm_dp_aux_register() across the tree.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
Surprisingly, this bridge actually registers it's AUX adapter at the
correct time already. Nice job! However, it does forget to actually
unregister the AUX adapter, so let's add a bridge function to handle that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-8-lyude@redhat.com
Since we're about to add a back-pointer to drm_dev in drm_dp_aux, let's
move the AUX adapter registration to the first point where we know which
DRM device we'll be working with - when the drm_bridge is attached.
Likewise, we unregister the AUX adapter on bridge detachment by adding a
ti_sn_bridge_detach() callback.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-7-lyude@redhat.com
Since this is a bridge, we don't start out with a respective DRM device.
Likewise this means we don't have a connector, which also means that we
should be following drm_dp_aux_register()'s documentation advice and not
call drm_dp_aux_register() until we have a matching connector. Instead,
call drm_dp_aux_init() in tc_probe() and wait until tc_bridge_attach() to
register our AUX channel. We also add tc_bridge_detach() to handle
unregistering the AUX adapter once the bridge has been disconnected.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-5-lyude@redhat.com
It is reported that on certain platforms there are power resources
that are not associated with any devices physically present in the
platform. Those power resources are expected to be turned off by
the OS in accordance with the ACPI specification (section 7.3 of
ACPI 6.4) which currently is not done by Linux and that may lead
to obscure issues.
For instance, leaving those power resources in the "on" state may
prevent the platform from reaching the lowest power state in
suspend-to-idle which leads to excessive power draw.
For this reason, turn all of the unused ACPI power resources off
at the end of the initial namespace scan for devices in analogy with
resume from suspend-to-RAM.
Link: https://uefi.org/specs/ACPI/6.4/07_Power_and_Performance_Mgmt/device-power-management-objects.html
Reported-by: David Box <david.e.box@linux.intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable in defconfig two Intel ARM64 architectures: the eASIC N5X SoCFPGA
and Keem Bay SoC. This allows compile coverage when building default
config.
For the N5X (and Agilex) enable also DesignWare SPI controller in MMIO.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The driver registers an interrupt handler in _probe, but didn't configure
them until later when the _open function is called. In between, the keypad
can fire an IRQ due to touchpad activity, which the handler ignores. This
causes the kernel to disable the interrupt, blocking the keypad from
working.
Fix this by disabling interrupts before registering the handler.
Additionally, disable them in _close, so that they're only enabled while
open.
Fixes: fc4f314618 ("Input: add TI-Nspire keypad support")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now, fallocate() on a pinned file only allocates blocks which aligns
to segment rather than section, so GC may try to migrate pinned file's
block, and after several times of failure, pinned file's block could
be migrated to other place, however user won't be aware of such
condition, and then old obsolete block address may be readed/written
incorrectly.
To avoid such condition, let's try to allocate pinned file's blocks
with section alignment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The Zenbook Flip entry that was added overwrites a previous one
because of a typo:
In file included from drivers/input/serio/i8042.h:23,
from drivers/input/serio/i8042.c:131:
drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init]
591 | .matches = {
| ^
drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches')
Add the missing separator between the two.
Fixes: b5d6e7ab7f ("Input: i8042 - add ASUS Zenbook Flip to noselftest list")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- OV7725 camera support for the iWave RainboW Qseven board (G21D), and
its camera expansion board,
- Add mmc aliases to fix /dev/mmcblkN order,
- HDMI Display support for the R-Car Starter Kit Pro with R-Car M3-W+,
- Support for running upstream kernels on the RZA2MEVB board, using
the SDRAM present on the sub-board,
- I2C EEPROM support for the Falcon development board,
- Timer, thermal sensor, and CAN support for the R-Car V3U SoC.
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYFRkuwAKCRCKwlD9ZEnx
cFcNAP9aKkzpZ345axPjyIa6YrL3YXeVSwChE/iZX1fLZKQP2AEAsAC2n5T0sZNy
vuDw/YOyhxxP6VCnk40BYah9LRFrFgY=
=So/N
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.13
- OV7725 camera support for the iWave RainboW Qseven board (G21D), and
its camera expansion board,
- Add mmc aliases to fix /dev/mmcblkN order,
- HDMI Display support for the R-Car Starter Kit Pro with R-Car M3-W+,
- Support for running upstream kernels on the RZA2MEVB board, using
the SDRAM present on the sub-board,
- I2C EEPROM support for the Falcon development board,
- Timer, thermal sensor, and CAN support for the R-Car V3U SoC.
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding
arm64: dts: renesas: r8a77961: Add CAN nodes
arm64: dts: renesas: r8a779a0: Add CMT support
arm64: dts: renesas: r8a779a0: Add thermal support
arm64: dts: renesas: r8a779a0: Add TMU support
arm64: dts: renesas: falcon: Add Ethernet sub-board
arm64: dts: renesas: falcon: Add CSI/DSI sub-board
arm64: dts: renesas: falcon: Add I2C EEPROM nodes
ARM: dts: rza2mevb: Upstream Linux requires SDRAM
arm64: dts: renesas: Consolidate Salvator-X(S) HDMI0 handling
arm64: dts: renesas: Add mmc aliases into board dts files
arm64: dts: renesas: r8a77961-ulcb: add HDMI Display support
ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts files
arm64: dts: renesas: Group tuples in pin control properties
arm64: dts: renesas: Group tuples in playback and capture properties
ARM: dts: renesas: Group tuples in pin control properties
ARM: dts: renesas: Group tuples in playback and capture properties
ARM: dts: renesas: Group tuples in APMU cpus properties
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725 sensors
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes
Link: https://lore.kernel.org/r/20210319085146.2709844-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refresh shmobile_defconfig for v5.12-rc2.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYFRhKQAKCRCKwlD9ZEnx
cKajAP9+vZpRZLviPpxhp70KeO2KVB0KQraCj/jykh64+wReHQD/QQp2hlzpSUvz
0ecoTV5XxAvuqQAVtCUgGCAHSnfssQ8=
=5JJQ
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.13
- Refresh shmobile_defconfig for v5.12-rc2.
* tag 'renesas-arm-defconfig-for-v5.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.12-rc2
Link: https://lore.kernel.org/r/20210319085146.2709844-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Controller needs to ensure display power is enabled only for
HDA controller reset. Drop the display power-up/down calls from
D0i3 entry/exit paths.
This was previously not possible as codec drivers could not resume the
links, and instead controller kept the reference to display power. The
state of display power had be maintained in the D0i3 entry/exit code.
With commit 87fc20e4a0 ("ASoC: SOF: Intel: hda: use hdac_ext
fine-grained link management"), this is no longer needed and the code
can be cleaned up.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Link: https://lore.kernel.org/r/20210322143830.3880293-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This KUnit update for Linux 5.12-rc5 consists of two fixes to kunit
tool from David Gow.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmBaFeoACgkQCwJExA0N
Qxz0Gg//Y3mX/SmBWYCB32Vm3nXOIqEPxDuTxn4V6l1XoSOjViDlqPjVMIeQ1/Cv
R8Hx0rXjzU9e9tuQaHSCnp89vqjnhIB3ROPWABsL2784EDsCpIqlT2ivey9wwBva
VImaTDFn4xlJjJG1L/vmlBzagczk02qSsvadbwC/+vLQSfSZJTZWD9c6TpmfF82T
P+FbWs8+WgpilsPOCYqXRvH8HDSWR/oXFOFxJTg64N3c5Vj2JIgnBeaCs+yahvEA
KnAt8988uhHH15ROsa93g6dIvQ4C7NT74IKZW8VLvkkUxAk86clQYRcZZdCBbZhc
yL3X1RhP/8a452df2LO0xraZTaxc2XI8H1F2ZhsJmmeBL2r2dyEe/4mWQD944e0h
ZGQqIi4+WiMV/+WyTwp05KxvPBaiG0GFFLznNEPQQLuP9Iwh8QBXnBpg+pw58pQ1
rk0fi8H0IaDjQjbAKiILnxRuINMAhoMOaYuYpMy+mD60AwyPOCAv1dHRInS8SG9D
UZxTDFyOQDJqSmLueqULbaWQ/21Jg8Jui4Mowf6DpXSXdPpJt4wHffBnWVW1OHqC
pYTCFAZ+S6bSoEeTvnyHXKO9MtsS0kxS1O5V5LS+Sc0sUcf3sxr83gU9E7Jvnmum
Os4HyFr5H4AAS4Yif2vgmB7Y2kIIgWViIcKzcGfXha8im8vcooM=
=uSNy
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to the kunit tool from David Gow"
* tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Disable PAGE_POISONING under --alltests
kunit: tool: Fix a python tuple typing error
- Prepare rmobile-sysc for fw_devlink=on,
- A minor cleanup.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYFRiEQAKCRCKwlD9ZEnx
cFHhAP9RialsGiaOjNhgSRV8LvyGDvCIPTGrVBx+b629ah7JLgEAoEkjEK6VR9+O
uk6KBy3PtHGXAtYhjdGo5hJAwuODSgg=
=2AXp
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v5.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.13
- Prepare rmobile-sysc for fw_devlink=on,
- A minor cleanup.
* tag 'renesas-drivers-for-v5.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rmobile-sysc: Mark fwnode when PM domain is added
soc: renesas: rmobile-sysc: Remove unneeded platform includes
Link: https://lore.kernel.org/r/20210319085146.2709844-4-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The input MCLK is 12.288MHz, the desired output sysclk is 11.2896MHz
and sample rate is 44100Hz, with the configuration pllprescale=2,
postscale=sysclkdiv=1, some chip may have wrong bclk
and lrclk output with pll enabled in master mode, but with the
configuration pllprescale=1, postscale=2, the output clock is correct.
>From Datasheet, the PLL performs best when f2 is between
90MHz and 100MHz when the desired sysclk output is 11.2896MHz
or 12.288MHz, so sysclkdiv = 2 (f2/8) is the best choice.
So search available sysclk_divs from 2 to 1 other than from 1 to 2.
Fixes: 84fdc00d51 ("ASoC: codec: wm9860: Refactor PLL out freq search")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1616150926-22892-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ELH is a derivative of TGL, so it should be exposed in tgl.c for
consistency.
No functional change.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Define the shutdown function to use
snd_sof_suspend as shutdown callback to make sure DSP is in D3 state.
Fixes: 44a4cfad8d ("ASoC: SOF: Intel: tgl: do thorough remove at .shutdown() callback")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>