According to the MPI specification, reply post array buffers can not cross
a 4 GB boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-7-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, reply post buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-6-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, reply buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-5-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, sense buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, chain buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shannon Nelson says:
====================
ionic fixes
These are a few little fixes and cleanups found while working
on other features and more testing.
====================
Don't destroy the adminq while there is an outstanding request.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up to now we've been ignoring any error return from the
queue starting in the link status check, so we fix that here.
If the driver had to reset and couldn't get things running
properly again, for example after a Tx Timeout and the FW is
not responding to commands, don't let the link watchdog try
to restart the queues. At this point the user can try to DOWN
and UP the device to clear the errors.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Block some actions while the FW is in a reset activity
and the queues are not configured.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support in get_link_ksettings for a couple of
new BASET connections.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can get to the counter without going through the pointer
that the robot complained about.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qcq->intr.index was set when the queue was allocated,
there is no need to reach around to find it.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Catch a couple of missing macro name uses, fix a couple
of misspellings, etc.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ocelot switches are a bit odd in that they do not have an STP state
to put the ports into. Instead, the forwarding configuration is delayed
from the typical port_bridge_join into stp_state_set, when the port enters
the BR_STATE_FORWARDING state.
I can only guess that the implementation of this quirk is the reason that
led to the simplification of the driver such that only one bridge could
be offloaded at a time.
We can simplify the data structures somewhat, and introduce a per-port
bridge device pointer and STP state, similar to how the LAG offload
works now (there we have a per-port bonding device pointer and TX
enabled state). This allows offloading multiple bridges with relative
ease, while still keeping in place the quirk to delay the programming of
the PGIDs.
We actually need this change now because we need to remove the bogus
restriction from ocelot_bridge_stp_state_set that ocelot->bridge_mask
needs to contain BIT(port), otherwise that function is a no-op.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a MRP ring was deleted or disabled, the driver was iterating over
the ports to detect if any other MPR rings exists and in case it didn't
exist it would delete the MAC table entry. But the problem was that it
used the last iterated port to delete the MAC table entry and this could
be a NULL port.
The fix consists of using the port on which the function was called.
Fixes: 7c588c3e96 ("net: ocelot: Extend MRP")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a virtual LAPB device's underlying Ethernet device closes, the LAPB
device is also closed.
However, currently the LAPB device is closed after the Ethernet device
closes. It would be better to close it before the Ethernet device closes.
This would allow the LAPB device to transmit a last frame to notify the
other side that it is disconnecting.
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pointer pfvf is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Fixes: 56bcef528b ("octeontx2-af: Use npc_install_flow API for promisc and broadcast entries")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver data for the data interface has already been set by
usb_driver_claim_interface() so drop the subsequent redundant
assignment.
Note that this also avoids setting the driver data three times in case
of a combined interface.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A typo is found out by codespell tool in 1734th line of drop_monitor.c:
$ codespell ./net/core/
./net/core/drop_monitor.c:1734: guarnateed ==> guaranteed
Fix a typo found by codespell.
Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
A typo is found out by codespell tool in 111th line of hsr_debugfs.c:
$ codespell ./net/hsr/
net/hsr/hsr_debugfs.c:111: Debufs ==> Debugfs
Fix typos found by codespell.
Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/of/of_net.c:104: warning: Function parameter or member 'np' not described in 'of_get_mac_address'
drivers/of/of_net.c:104: warning: expecting prototype for mac(). Prototype was for of_get_mac_address() instead
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intel mGbE variant implemented in EHL and TGL can be set to select
different clock frequency based on GPO bits in MAC_GPIO_STATUS register.
We introduce a new "void (*ptp_clk_freq_config)(void *priv)" in platform
data so that if a platform is required to configure the frequency of clock
source, in this case Intel mGBE does, the platform-specific configuration
of the PTP clock setting is done when stmmac_ptp_register() is called.
Signed-off-by: Wong, Vee Khee <vee.khee.wong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ttm:
- Make ttm_bo_unpin() not wraparound on too many unpins.
omap:
- Fix coccicheck warning in omap.
amdgpu:
- DCN 3.0 gamma fixes
- DCN 2.1 corrupt screen fix
i915:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+
nouveau:
- workaround oops with bo syncing
-----BEGIN PGP SIGNATURE-----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=r/pg
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-03-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes pull, pretty small set of fixes, a couple of i915 and
amdgpu, one ttm, one nouveau and one omap. Probably smaller than usual
for this time, so we'll see if something pops up next week or if this
will continue to stay small.
Summary:
ttm:
- Make ttm_bo_unpin() not wraparound on too many unpins
omap:
- Fix coccicheck warning in omap
amdgpu:
- DCN 3.0 gamma fixes
- DCN 2.1 corrupt screen fix
i915:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+
nouveau:
- workaround oops with bo syncing"
* tag 'drm-fixes-2021-03-19' of git://anongit.freedesktop.org/drm/drm:
nouveau: Skip unvailable ttm page entries
drm/amd/display: Remove MPC gamut remap logic for DCN30
drm/amd/display: Correct algorithm for reversed gamma
drm/omap: dsi: fix unsigned expression compared with zero
i915/perf: Start hrtimer only if sampling the OA buffer
drm/i915: Workaround async flip + VT-d corruption on HSW/BDW
drm/amd/display: Copy over soc values before bounding box creation
drm/ttm: make ttm_bo_unpin more defensive
Starting with commit f295c8cfec
("drm/nouveau: fix dma syncing warning with debugging on.")
the following oops occures:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 1013 Comm: Xorg.bin Tainted: G E 5.11.0-desktop-rc0+ #2
Hardware name: Acer Aspire VN7-593G/Pluto_KLS, BIOS V1.11 08/01/2018
RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]
Call Trace:
nouveau_bo_validate+0x5d/0x80 [nouveau]
nouveau_gem_ioctl_pushbuf+0x662/0x1120 [nouveau]
? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
drm_ioctl_kernel+0xa6/0xf0 [drm]
drm_ioctl+0x1f4/0x3a0 [drm]
? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
nouveau_drm_ioctl+0x50/0xa0 [nouveau]
__x64_sys_ioctl+0x7e/0xb0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
---[ end trace ccfb1e7f4064374f ]---
RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]
The underlying problem is not introduced by the commit, yet it uncovered the
underlying issue. The cited commit relies on valid pages. This is not given for
due to some bugs. For now, just warn and work around the issue by just ignoring
the bad ttm objects.
Below is some debug info gathered while debugging this issue:
nouveau 0000:01:00.0: DRM: ttm_dma->num_pages: 2048
nouveau 0000:01:00.0: DRM: ttm_dma->pages is NULL
nouveau 0000:01:00.0: DRM: ttm_dma: 00000000e96058e7
nouveau 0000:01:00.0: DRM: ttm_dma->page_flags:
nouveau 0000:01:00.0: DRM: ttm_dma: Populated: 1
nouveau 0000:01:00.0: DRM: ttm_dma: No Retry: 0
nouveau 0000:01:00.0: DRM: ttm_dma: SG: 256
nouveau 0000:01:00.0: DRM: ttm_dma: Zero Alloc: 0
nouveau 0000:01:00.0: DRM: ttm_dma: Swapped: 0
Signed-off-by: Tobias Klausmann <tobias.klausmann@freenet.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313222159.3346-1-tobias.klausmann@freenet.de
drm/i915 fixes for v5.12-rc4:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87blbg8y5t.fsf@intel.com
- Make ttm_bo_unpin() not wraparound on too many unpins.
- Fix coccicheck warning in omap.
-----BEGIN PGP SIGNATURE-----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=h0OV
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-03-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.12-rc4:
- Make ttm_bo_unpin() not wraparound on too many unpins.
- Fix coccicheck warning in omap.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0e13bbb-6ba6-ff24-4db8-0e02e605de18@linux.intel.com
Tobias Waldekranz says:
====================
net: dsa: mv88e6xxx: Offload bridge port flags
Add support for offloading learning and broadcast flooding flags. With
this in place, mv88e6xx supports offloading of all bridge port flags
that are currently supported by the bridge.
Broadcast flooding is somewhat awkward to control as there is no
per-port bit for this like there is for unknown unicast and unknown
multicast. Instead we have to update the ATU entry for the broadcast
address for all currently used FIDs.
v2 -> v3:
- Only return a netdev from dsa_port_to_bridge_port if the port is
currently bridged (Vladimir & Florian)
v1 -> v2:
- Ensure that mv88e6xxx_vtu_get handles VID 0 (Vladimir)
- Fixed off-by-one in mv88e6xxx_port_set_assoc_vector (Vladimir)
- Fast age all entries on port when disabling learning (Vladimir)
- Correctly detect bridge flags on LAG ports (Vladimir)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These switches have two modes of classifying broadcast:
1. Broadcast is multicast.
2. Broadcast is its own unique thing that is always flooded
everywhere.
This driver uses the first option, making sure to load the broadcast
address into all active databases. Because of this, we can support
per-port broadcast flooding by (1) making sure to only set the subset
of ports that have it enabled whenever joining a new bridge or VLAN,
and (2) by updating all active databases whenever the setting is
changed on a port.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow a user to control automatic learning per port.
Many chips have an explicit "LearningDisable"-bit that can be used for
this, but we opt for setting/clearing the PAV instead, as it works on
all devices at least as far back as 6083.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In accordance with the comment in dsa_port_bridge_leave, standalone
ports shall be configured to flood all types of traffic. This change
aligns the mv88e6xxx driver with that policy.
Previously a standalone port would initially not egress any unknown
traffic, but after joining and then leaving a bridge, it would.
This does not matter that much since we only ever send FROM_CPUs on
standalone ports, but it seems prudent to make sure that the initial
values match those that are applied after a bridging/unbridging cycle.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the conventional declaration style of a MAC address in the
kernel (u8 addr[ETH_ALEN]) for the broadcast address, then set it
using the existing helper.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hardware has a somewhat quirky protocol for reading out the VTU
entry for a particular VID. But there is no reason why we cannot
create a better API for ourselves in the driver.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the intricacies of correctly iterating over the VTU to a common
implementation.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a port is a part of a LAG, the ATU will create dynamic entries
belonging to the LAG ID when learning is enabled. So trying to
fast-age those out using the constituent port will have no
effect. Unfortunately the hardware does not support move operations on
LAGs so there is no obvious way to transform the request to target the
LAG instead.
Instead we document this known limitation and at least avoid wasting
any time on it.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order for a driver to be able to query a bridge for information
about itself, e.g. reading out port flags, it has to use a netdev that
is known to the bridge. In the simple case, that is just the netdev
representing the port, e.g. swp0 or swp1 in this example:
br0
/ \
swp0 swp1
But in the case of an offloaded lag, this will be the bond or team
interface, e.g. bond0 in this example:
br0
/
bond0
/ \
swp0 swp1
Add a helper that hides some of this complexity from the
drivers. Then, redefine dsa_port_offloads_bridge_port using the helper
to avoid double accounting of the set of possible offloaded uppers.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: support 32-bit targets
There is currently a configuration dependency that restricts IPA to
be supported only on 64-bit machines. There are only a few things
that really require that, and those are fixed in this series. The
last patch in the series removes the CONFIG_64BIT build dependency
for IPA.
Version 2 of this series uses upper_32_bits() rather than creating
a new function to extract bits out of a DMA address. Version 3 of
uses lower_32_bits() as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently assume the IPA driver is built only for a 64 bit kernel.
When this constraint was put in place it eliminated some do_div()
calls, replacing them with the "/" and "%" operators. We now only
use these operations on u32 and size_t objects. In a 32-bit kernel
build, size_t will be 32 bits wide, so there remains no reason to
use do_div() for divide and modulo.
A few recent commits also fix some code that assumes that DMA
addresses are 64 bits wide.
With that, we can get rid of the 64-bit build requirement.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently have a build-time check to ensure that the minimum DMA
allocation alignment satisfies the constraint that IPA filter and
route tables must point to rules that are 128-byte aligned.
But what's really important is that the actual allocated DMA memory
has that alignment, even if the minimum is smaller than that.
Remove the BUILD_BUG_ON() call checking against minimim DMA alignment
and instead verify at rutime that the allocated memory is properly
aligned.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use upper_32_bits() to extract the high-order 32 bits of a DMA
address. This avoids doing a 32-position shift on a DMA address
if it happens not to be 64 bits wide. Use lower_32_bits() to
extract the low-order 32 bits (because that's what it's for).
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some build time checks in ipa_table_validate_build() assume that a
DMA address is 64 bits wide. That is more restrictive than it has
to be. A route or filter table is 64 bits wide no matter what the
size of a DMA address is on the AP. The code actually uses a
pointer to __le64 to access table entries, and a fixed constant
IPA_TABLE_ENTRY_SIZE to describe the size of those entries.
Loosen up two checks so they still verify some requirements, but
such that they do not assume the size of a DMA address is 64 bits.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
s390/qeth: updates 2021-03-18
please apply the following patch series for qeth to netdev's net-next
tree.
This brings two small optimizations (replace a hard-coded GFP_ATOMIC,
pass through the NAPI budget to enable napi_consume_skb()), and removes
some redundant VLAN filter code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The callbacks have been slimmed down to a level where they no longer do
any actual work. So stop pretending that we support the
NETIF_F_HW_VLAN_CTAG_FILTER feature.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pending TX buffers are completed from the same NAPI code as normal
TX buffers. Pass the NAPI budget to qeth_tx_complete_buf() so that
the freeing of the completed skbs can be deferred.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_init_qdio_out_buf() is typically called during initialization, and
the GFP_ATOMIC is only needed for a very specific & rare case during TX
completion.
Allow callers to specify a gfp mask, so that the initialization path can
select GFP_KERNEL. While at it also clarify the function name.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Nakryiko says:
====================
This patch set adds new libbpf APIs and their bpftool integration that allows
to perform static linking of BPF object files. Currently no extern resolution
across object files is performed. This is going to be the focus of the follow
up patches. But, given amount of code and logic necessary to perform just
basic functionality of linking together mostly independent BPF object files,
it was decided to land basic BPF linker code and logic first and extend it
afterwards.
The motivation for BPF static linking is to provide the functionality that is
naturally assumed for user-space development process: ability to structure
application's code without artificial restrictions of having all the code and
data (variables and maps) inside a single source code file.
This enables better engineering practices of splitting code into
well-encapsulated parts. It provides ability to hide internal state from other
parts of the code base through static variables and maps. It is also a first
steps towards having generic reusable BPF libraries.
Please see individual patches (mostly #6 and #7) for more details. Patch #10
passes all test_progs' individual BPF .o files through BPF static linker,
which is supposed to be a no-op operation, so is essentially validating that
BPF static linker doesn't produce corrupted ELF object files. Patch #11 adds
Makefile infra to be able to specify multi-file BPF object files and adds the
first multi-file test to validate correctness.
v3->v4:
- fix Makefile copy/paste error of diff'ing invalid object files (Alexei);
- fix uninitialized obj_name variable that could lead to bogus object names
being used during skeleton generation (kernel-patches CI);
v2->v3:
- added F(F(F(X))) = F(F(X)) test for all linked BPF object files (Alexei);
- used reallocarray() more consistently in few places (Alexei);
- improved bash completions for `gen object` (Quentin);
- dropped .bpfo extension, but had to add optional `name OBJECT_FILE`
parameter (path #8) to `gen skeleton` command to specify desired object
name during skeleton generation;
- fixed bug of merging DATASECS of special "license" and "version" sections.
Linker currently strictly validates that all versions and licenses matches
exactly and keeps only ELF symbols and BTF DATASEC from the very first
object file with license/version. For all other object files, we ignore
ELF symbols, but weren't ignoring DATASECs, which caused further problems
of not being able to find a corresponding ELF symbol, if variable name
differs between two files (which we test deliberately in multi-file
linking selftest). The fix is to ignore BTF DATASECS;
v1->v2:
- extracted `struct strset` to manage unique set of strings both for BTF and
ELF SYMTAB (patch #4, refactors btf and btf_dedup logic as well) (Alexei);
- fixed bugs in bpftool gen command; renamed it to `gen object`, added BASH
completions and extended/updated man page (Quentin).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add Makefile infra to specify multi-file BPF object files (and derivative
skeletons). Add first selftest validating BPF static linker can merge together
successfully two independent BPF object files and resulting object and
skeleton are correct and usable.
Use the same F(F(F(X))) = F(F(X)) identity test on linked object files as for
the case of single BPF object files.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-13-andrii@kernel.org
Pass all individual BPF object files (generated from progs/*.c) through
`bpftool gen object` command to validate that BPF static linker doesn't
corrupt them.
As an additional sanity checks, validate that passing resulting object files
through linker again results in identical ELF files. Exact same ELF contents
can be guaranteed only after two passes, as after the first pass ELF sections
order changes, and thus .BTF.ext data sections order changes. That, in turn,
means that strings are added into the final BTF string sections in different
order, so .BTF strings data might not be exactly the same. But doing another
round of linking afterwards should result in the identical ELF file, which is
checked with additional `diff` command.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-12-andrii@kernel.org