Commit graph

1,014,740 commits

Author SHA1 Message Date
Geetha sowjanya
f12098ce9b octeontx2-pf: Clear RSS enable flag on interace down
RSS configuration can not be get/set when interface is in down state
as they required mbox communication. RSS enable flag status
is used for set/get configuration. Current code do not clear the
RSS enable flag on interface down which lead to mbox error while
trying to set/get RSS configuration.

Fixes: 85069e95e5 ("octeontx2-pf: Receive side scaling support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 14:12:42 -07:00
Geetha sowjanya
ae2619dd4f octeontx2-af: Fix irq free in rvu teardown
Current devlink code try to free already freed irqs as the
irq_allocate flag is not cleared after free leading to kernel
crash while removing rvu driver. The patch fixes the irq free
sequence and clears the irq_allocate flag on free.

Fixes: 7304ac4567 ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 14:12:42 -07:00
Subbaraya Sundeep
2978878729 octeontx2-af: Return correct CGX RX fifo size
CGX receive buffer size is a constant value and
cannot be read from CGX0 block always since
CGX0 may not enabled everytime. Hence return CGX
receive buffer size from first enabled CGX block
instead of CGX0.

Fixes: 6e54e1c539 ("octeontx2-af: cn10K: MTU configuration")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 14:12:42 -07:00
Subbaraya Sundeep
ce86c2a531 octeontx2-af: Remove TOS field from MKEX TX
The MKEX profile describes what packet fields need to be extracted from
the input packet and how to place those packet fields in the output key
for MCAM matching.  The MKEX profile can be in a way where higher layer
packet fields can overwrite lower layer packet fields in output MCAM
Key.
Hence MKEX profile is always ensured that there are no overlaps between
any of the layers. But the commit 42006910b5
("octeontx2-af: cleanup KPU config data") introduced TX TOS field which
overlaps with DMAC in MCAM key.
This led to AF driver returning error when TX rule is installed with
DMAC as match criteria since DMAC gets overwritten and cannot be
supported. This patch fixes the issue by removing TOS field from MKEX TX
profile.

Fixes: 42006910b5 ("octeontx2-af: cleanup KPU config data")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 14:12:42 -07:00
Rakesh Babu
f788409714 octeontx2-af: Formatting debugfs entry rsrc_alloc.
With the existing rsrc_alloc's format, there is misalignment for the
pcifunc entries whose VF's index is a double digit. This patch fixes
this.

    pcifunc     NPA         NIX0        NIX1        SSO GROUP   SSOWS
    TIM         CPT0        CPT1        REE0        REE1
    PF0:VF0     8           5
    PF0:VF1     9                       3
    PF0:VF10    18          10
    PF0:VF11    19                      8
    PF0:VF12    20          11
    PF0:VF13    21                      9
    PF0:VF14    22          12
    PF0:VF15    23                      10
    PF1         0           0

Fixes: 23205e6d06 ("octeontx2-af: Dump current resource provisioning status")
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 14:12:42 -07:00
Subbaraya Sundeep
f41b2d67d7 octeontx2-pf: Do not modify number of rules
In the ETHTOOL_GRXCLSRLALL ioctl ethtool uses
below structure to read number of rules from the driver.

    struct ethtool_rxnfc {
            __u32                           cmd;
            __u32                           flow_type;
            __u64                           data;
            struct ethtool_rx_flow_spec     fs;
            union {
                    __u32                   rule_cnt;
                    __u32                   rss_context;
            };
            __u32                           rule_locs[0];
    };

Driver must not modify rule_cnt member. But currently driver
modifies it by modifying rss_context. Hence fix it by using a
local variable.

Fixes: 81a4362016 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 14:12:41 -07:00
Richard Guy Briggs
7c585c9dff audit: document /proc/PID/sessionid
Describe the /proc/PID/loginuid interface in Documentation/ABI/stable that
was added 2008-03-13 in commit 1e0bd7550e ("[PATCH] export sessionid
alongside the loginuid in procfs")

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-18 16:58:06 -04:00
Richard Guy Briggs
1dd34cfcfd audit: document /proc/PID/loginuid
Describe the /proc/PID/loginuid interface in Documentation/ABI/stable that
was added 2005-02-01 by commit 1e2d1492e178 ("[PATCH] audit: handle
loginuid through proc")

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-18 16:56:36 -04:00
Linus Torvalds
81aa0968b7 for-5.12-rc3-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmBTeBsACgkQxWXV+ddt
 WDtwcBAAoto5Pbc3Lvt0aha3qn9q/Ms9lNU3YIwTjqXV3lIRKksWCS7kQmWlFmLz
 dILhdRBg1iWVh8qbeqpL5su7yNJduypsY/ImJroukb/BzwQViFRDGy5qIc56qLH2
 OVTx4LQ0zdqVdD86Qj0mt9ilSjgXYN+J53IUjsSSyJIpgt3vVcfjCYSkFO8zBiMH
 eliRtYShzJHkjEwVWLZRzk76oTnFQEC28IdYJ4y95mYl2wCABfTU2ylSeVDTtc6O
 x+fNMHHRmde2nbsHc+0eMm7rYLXuzvyx/tY17u6A6iwEQLGjE4rXOVZ7kA93WgAd
 YTXhM/B+YFfirNh029Av/MJP+2t9YBEODAHl1tnOdM0mfvXkpimaW0jvUEhi5f6I
 ZGu5FytscsgjyUK827WL7bZKO8WMzTLQvB3ryZ9UcrHm3QbZ7xGdoBE2L86p4Euw
 LiXUALdOWeYjFKSW9WWKrtQBtdjlLQYqJt+hL0ifaGlnfoi2G+DQeKtL9ZAKH5Cu
 gcjDUewnJtYPLyDOCRjQPFcts/MD5o81qMLeEwshmZT/bNMD9JOGEppCxBWGWSCx
 dYGq04Wib/dN710i5jB1XbJboBmT2SZDyBeiKTpCXs5mECBU00uWkkO98oId1YS3
 wHu9qyGUOi2g88V27jH593/JstUYn6zyxJYIZX84mzcxOqZlKuo=
 =auMP
 -----END PGP SIGNATURE-----

Merge tag 'for-5.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "There are still regressions being found and fixed in the zoned mode
  and subpage code, the rest are fixes for bugs reported by users.

  Regressions:

   - subpage block support:
      - readahead works on the proper block size
      - fix last page zeroing

   - zoned mode:
      - linked list corruption for tree log

  Fixes:

   - qgroup leak after falloc failure

   - tree mod log and backref resolving:
      - extent buffer cloning race when resolving backrefs
      - pin deleted leaves with active tree mod log users

   - drop debugging flag from slab cache"

* tag 'for-5.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: always pin deleted leaves when there are active tree mod log users
  btrfs: fix race when cloning extent buffer during rewind of an old root
  btrfs: fix slab cache flags for free space tree bitmap
  btrfs: subpage: make readahead work properly
  btrfs: subpage: fix wild pointer access during metadata read failure
  btrfs: zoned: fix linked list corruption after log root tree allocation failure
  btrfs: fix qgroup data rsv leak caused by falloc failure
  btrfs: track qgroup released data in own variable in insert_prealloc_file_extent
  btrfs: fix wrong offset to zero out range beyond i_size
2021-03-18 13:38:42 -07:00
Omar Sandoval
c1d6abdac4 btrfs: fix check_data_csum() error message for direct I/O
Commit 1dae796aabf6 ("btrfs: inode: sink parameter start and len to
check_data_csum()") replaced the start parameter to check_data_csum()
with page_offset(), but page_offset() is not meaningful for direct I/O
pages. Bring back the start parameter.

Fixes: 265d4ac03f ("btrfs: sink parameter start and len to check_data_csum")
CC: stable@vger.kernel.org # 5.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-18 21:25:11 +01:00
Linus Torvalds
dc0337999d VFIO fixes for v5.12-rc4
- Fix 32-bit issue with new unmap-all flag (Steve Sistare)
 
  - Various Kconfig changes for better coverage (Jason Gunthorpe)
 
  - Fix to batch pinning support (Daniel Jordan)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJgU6PRAAoJECObm247sIsixAQP/RQCvHD4W7jmgrb7ksucE7Hz
 KaJaJzbonayUCdI5e1W4x4j8BhiclIAJXz+kMbjltN4AqASkKVIBzIlBmDt4nsJ/
 AMCN7A1EOmPpG1xX6TpTXxfdw/7VjSRtFk/S8mv0N0NIRdZwue4SBbZd/oXkk7NF
 vBSsJkVn/nCGrEu1+vb/Ld5T8fecni99slyTaN/WYlEVqIJtTDEZhvPwMrIqNOcu
 n2UDMrifuUqXmbOKtCRhwPIwpOzEx8E1vNHAWHu3S8KOhdj7g6QXyWij2EmBD0hs
 rKU+uVnH/KImNVGHnwVqbPrlCxUcBV/RXKAA2XxN6VQiiLYAvhbHISVTtVHt21rQ
 pwJGcOyOeBmt+FrVw3cLwtkn3y87Nrg6gpQlrw3k3dyuYIUVThlUlBADzpmX0ZM5
 40BYpWPsrqdvPQxZzY6ccAvkn838ZTNPDSPac5nnQOJgeYnxR+cWKzKeL4bggJxm
 kYhoIIQETnbJeUZQYOP4FT8ltJPJkhaMTHYSdKrCvkYhN2Eq3+Wi+gLiMbeEpM+d
 6IUH+ZwHfH8DGQGUBfpt6AuKNu5vnUppHAu/xpoXJxl2ITyKHDoXypuEHsD+DRro
 4CmS74+ma932WHYc+wwqnKRjyUFlwaDbqmIV7vv54dHRkhMSfGDVbWybCosGNodL
 NJNR1uFmuVgcyKpcWinq
 =C+4w
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

 - Fix 32-bit issue with new unmap-all flag (Steve Sistare)

 - Various Kconfig changes for better coverage (Jason Gunthorpe)

 - Fix to batch pinning support (Daniel Jordan)

* tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/type1: fix vaddr_get_pfns() return in vfio_pin_page_external()
  vfio: Depend on MMU
  ARM: amba: Allow some ARM_AMBA users to compile with COMPILE_TEST
  vfio-platform: Add COMPILE_TEST to VFIO_PLATFORM
  vfio: IOMMU_API should be selected
  vfio/type1: fix unmap all on ILP32
2021-03-18 12:37:05 -07:00
Linus Torvalds
c73891c922 Changes for 5.12-rc3:
- Fix quota accounting on creat() when id mapping is enabled.
  - Actually reclaim dirty quota inodes when mount fails.
  - Typo fixes for documentation.
  - Restrict both bulkstat calls on idmapped/namespaced mounts.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmBPgosACgkQ+H93GTRK
 tOvUxRAAnseftovKcY/0DxuVyaqM+9MCOTSZ7vJ/buhRyyXOWjrpI/2IU8arJlc9
 iY2Qc15djBKywGneQI1KHEErsU8PhfUIgqF1R9uwkoOqNgCBQ+nj23VHnLvS19XL
 0J8f+V3udi4Hxl7iToRs1ZjzIvsiwkZHaEqs37MtG4ZxOn3u2OV5c9pMD+sOvLMU
 iJjkaAoikYFynHCndW+egLvwmcoJnnfl57cgj238twMN3oXDG2QDumJ6XbaKUfg9
 7wZNbRNRzq9w9OMaABKWMljHT8MVLXPYavhdJ76GZhujJcD6vdJZJ8+vvtUtk4JT
 0Z0YTsOoAeU1BjDcJH9g+wkQWFOj2Jme/TjhIPmz4KeQi65Ir+mlTfF47GGJySti
 YjRL/kTv5V5OvGsUmeMHQ2Y/Wt5YksdgtP9wQzzx7Lcv17SVgFbJ+nYbv05WMpke
 UUxYhoAWcfsC/kmOllpBbZTyisjAv7hjmiLpGiQteR5RY1DE8PtH532Y5jz08huM
 veHfqpa4rLUEACRl1Qg+gTeTd3dg/gTpVANIp0HWkpzP/V8I+OvrJxNZFEBcOHK4
 WzZXSwG2tSAIi1hMuzB75q5qmUQTND3QOX6u1uzUBU+KMl/U16SJJbGkWrwx7Ko2
 hucFDvCmcW6lgMgY41R56mM0Sy5TMgXqaSdZtiykE0yytT2hl+8=
 =MQhY
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "A couple of minor corrections for the new idmapping functionality, and
  a fix for a theoretical hang that could occur if we decide to abort a
  mount after dirtying the quota inodes.

  Summary:

   - Fix quota accounting on creat() when id mapping is enabled

   - Actually reclaim dirty quota inodes when mount fails

   - Typo fixes for documentation

   - Restrict both bulkstat calls on idmapped/namespaced mounts"

* tag 'xfs-5.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: also reject BULKSTAT_SINGLE in a mount user namespace
  docs: ABI: Fix the spelling oustanding to outstanding in the file sysfs-fs-xfs
  xfs: force log and push AIL to clear pinned inodes when aborting mount
  xfs: fix quota accounting when a mount is idmapped
2021-03-18 12:32:51 -07:00
Richard Guy Briggs
c432237550 MAINTAINERS: update audit files
Add files maintaned by the audit subsystem.

Files from arch/*/*/*audit*.[ch] and arch/x86/include/asm/audit.h were not
added due to concern of the list not holding up over time.  There exist
already exceptions that caused the need for this specificity.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-18 14:57:38 -04:00
Yue Hu
389e4ecf5f cpufreq: schedutil: Call sugov_update_next_freq() before check to fast_switch_enabled
Note that sugov_update_next_freq() may return false, that means the
caller sugov_fast_switch() will do nothing except fast switch check.

Similarly, sugov_deferred_update() also has unnecessary operations
of raw_spin_{lock,unlock} in sugov_update_single_freq() for that case.

So, let's call sugov_update_next_freq() before the fast switch check
to avoid unnecessary behaviors above. Accordingly, update interface
definition to sugov_deferred_update() and remove sugov_fast_switch()
since we will call cpufreq_driver_fast_switch() directly instead.

Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-18 19:49:16 +01:00
Pu Wen
a740561201 powercap: Add Hygon Fam18h RAPL support
Enable Hygon Fam18h RAPL support for the power capping framework.

Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-18 19:42:23 +01:00
Ulf Hansson
c1df456d0f PM: domains: Don't runtime resume devices at genpd_prepare()
Runtime resuming a device upfront in the genpd_prepare() callback,
to check if there is a wakeup pending for it, seems like an
unnecessary thing to do.

The PM core already manages these kind of things in a common way in
__device_suspend(), via calling pm_runtime_barrier() and
pm_wakeup_pending().

Therefore, let's simply drop this behaviour from genpd_prepare().

Note that, this change is applicable only for devices that are
attached to a genpd that has the GENPD_FLAG_ACTIVE_WAKEUP set
(Renesas, Mediatek, and Rockchip platforms). Moreover, a driver
that needs to restore power for its device to re-configure it
for a system wakeup, may still call pm_runtime_get_sync(), for
example, to do this.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-18 19:40:00 +01:00
David S. Miller
3122216255 Merge branch 'octeon-tc-offloads'
Naveen Mamindlapalli says:

====================
Add tc hardware offloads

This patch series adds support for tc hardware offloads.

Patch #1 adds support for offloading flows that matches IP tos and IP
         protocol which will be used by tc hw offload support. Also
         added ethtool n-tuple filter to code to offload the flows
         matching the above fields.
Patch #2 adds tc flower hardware offload support on ingress traffic.
Patch #3 adds TC flower offload stats.
Patch #4 adds tc TC_MATCHALL egress ratelimiting offload.

* tc flower hardware offload in PF driver

The driver parses the flow match fields and actions received from the tc
subsystem and adds/delete MCAM rules for the same. Each flow contains set
of match and action fields. If the action or fields are not supported,
the rule cannot be offloaded to hardware. The tc uses same set of MCAM
rules allocated for ethtool n-tuple filters. So, at a time only one entity
can offload the flows to hardware, they're made mutually exclusive in the
driver.

Following match and actions are supported.

Match: Eth dst_mac, EtherType, 802.1Q {vlan_id,vlan_prio}, vlan EtherType,
       IP proto {tcp,udp,sctp,icmp,icmp6}, IPv4 tos, IPv4{dst_ip,src_ip},
       L4 proto {dst_port|src_port number}.
Actions: drop, accept, vlan pop, redirect to another port on the device.

The Hardware stats are also supported. Currently only packet counter stats
are updated.

* tc egress rate limiting support
Added TC-MATCHALL classifier offload with police action applied for all
egress traffic on the specified interface.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 11:37:22 -07:00
Sunil Goutham
e638a83f16 octeontx2-pf: TC_MATCHALL egress ratelimiting offload
Add TC_MATCHALL egress ratelimiting offload support with POLICE
action for entire traffic going out of the interface.

Eg: To ratelimit egress traffic to 100Mbps

$ ethtool -K eth0 hw-tc-offload on
$ tc qdisc add dev eth0 clsact
$ tc filter add dev eth0 egress matchall skip_sw \
                action police rate 100Mbit burst 16Kbit

HW supports a max burst size of ~128KB.
Only one ratelimiting filter can be installed at a time.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 11:37:22 -07:00
Naveen Mamindlapalli
d8ce30e0cf octeontx2-pf: add tc flower stats handler for hw offloads
Add support to get the stats for tc flower flows that are
offloaded to hardware. To support this feature, added a
new AF mbox handler which returns the MCAM entry stats
for a flow that has hardware stat counter enabled.

Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 11:37:22 -07:00
Naveen Mamindlapalli
1d4d9e42c2 octeontx2-pf: Add tc flower hardware offload on ingress traffic
This patch adds support for tc flower hardware offload on ingress
traffic. Since the tc-flower filter rules use the same set of MCAM
rules as the n-tuple filters, the n-tuple filters and tc flower
rules are mutually exclusive. When one of the feature is enabled
using ethtool, the other feature is disabled in the driver. By default
the driver enables n-tuple filters during initialization.

The following flow keys are supported.
    -> Ethernet: dst_mac
    -> L2 proto: all protocols
    -> VLAN (802.1q): vlan_id/vlan_prio
    -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos
    -> IPv6: ip_proto{icmpv6}
    -> L4(tcp/udp/sctp): dst_port/src_port

The following flow actions are supported.
    -> drop
    -> accept
    -> redirect
    -> vlan pop

The flow action supports multiple actions when vlan pop is specified
as the first action. The redirect action supports redirecting to the
PF/VF of same PCI device. Redirecting to other PCI NIX devices is not
supported.

Example #1: Add a tc filter rule to drop UDP traffic with dest port 80
    # ethtool -K eth0 hw-tc-offload on
    # tc qdisc add dev eth0 ingress
    # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \
          udp dst_port 80 action drop

Example #2: Add a tc filter rule to redirect ingress traffic on eth0
with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr.
    # ethtool -K eth0 hw-tc-offload on
    # tc qdisc add dev eth0 ingress
    # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \
          vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \
          ingress redirect dev eth6

Example #3: List the ingress filter rules
    # tc -s filter show dev eth4 ingress

Example #4: Delete tc flower filter rule with handle 0x1
    # tc filter del dev eth0 ingress protocol ip pref 49152 \
      handle 1 flower

Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 11:37:22 -07:00
Naveen Mamindlapalli
2b9cef6679 octeontx2-pf: Add ip tos and ip proto icmp/icmpv6 flow offload support
Add support for programming the HW MCAM match key with IP tos, IP(v6)
proto icmp/icmpv6, allowing flow offload rules to be installed using
those fields. The NPC HW extracts layer type, which will be used as a
matching criteria for different IP protocols.

The ethtool n-tuple filter logic has been updated to parse the IP tos
and l4proto for HW offloading. l4proto tcp/udp/sctp/ah/esp/icmp are
supported. See example usage below.

Ex: Redirect l4proto icmp to vf 0 queue 0
ethtool -U eth0 flow-type ip4 l4proto 1 action vf 0 queue 0

Ex: Redirect flow with ip tos 8 to vf 0 queue 0
ethtool -U eth0 flow-type ip4 tos 8 vf 0 queue 0

Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 11:37:22 -07:00
Artem Bityutskiy
d484b8bfc6 intel_idle: update ICX C6 data
Change IceLake Xeon C6 latency from 128 us to 170 us. The latency
was measured with the "wult" tool and corresponds to the 99.99th
percentile when measuring with the "nic" method. Note, the 128 us
figure correspond to the median latency, but in intel_idle we use
the "worst case" latency figure instead.

C6 target residency was increased from 384 us to 600 us, which may
result in less C6 residency in some workloads. This value was tested
and compared to values 384, and 1000. Value 600 is a reasonable
tradeoff between power and performance.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-18 19:36:34 +01:00
Marc Zyngier
5b08709313 KVM: arm64: Fix host's ZCR_EL2 restore on nVHE
We re-enter the EL1 host with CPTR_EL2.TZ set in order to
be able to lazily restore ZCR_EL2 when required.

However, the same CPTR_EL2 configuration also leads to trapping
when ZCR_EL2 is accessed from EL2. Duh!

Clear CPTR_EL2.TZ *before* writing to ZCR_EL2.

Fixes: beed09067b ("KVM: arm64: Trap host SVE accesses when the FPSIMD state is dirty")
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-18 18:30:26 +00:00
Mian Yousaf Kaukab
804741ac7b netsec: restore phy power state after controller reset
Since commit 8e850f25b5 ("net: socionext: Stop PHY before resetting
netsec") netsec_netdev_init() power downs phy before resetting the
controller. However, the state is not restored once the reset is
complete. As a result it is not possible to bring up network on a
platform with Broadcom BCM5482 phy.

Fix the issue by restoring phy power state after controller reset is
complete.

Fixes: 8e850f25b5 ("net: socionext: Stop PHY before resetting netsec")
Cc: stable@vger.kernel.org
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 11:22:04 -07:00
Linus Torvalds
bf152b0b41 virtio: fixes, cleanups
Some fixes and cleanups all over the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmBTl5oPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpTjQIAMvBc1dElNT1wmEkALeR3GRG+e1FcNdvhJaC
 hjK23b7xuHDkX4/yyqui7bgvZTkYE5WuUU/Jq6eAOR1k3n9o6u3nV1px+ntRi4OJ
 dmFiXlqOgkgvCfRwIqJk68eyURIhw4vdswMn0DZGMbFubh9vUw6H4CGye6pNxqPu
 ZhyGMYCQKguxs3+KWtHEkjcEdZbkxkxB9G7yA0jXhGmeMDVfGbRiucJWwwRutgrs
 lI2uf1vI0A9qGi4kQlTLO2Qv2b9CRbFZyT1zPuqtZER2PKRLOwFuNTMUueYcaWfW
 8XAM0R7mMZ1IDPgL181D+98Jk8eDQVcwVdVYOFWT9RpBdhtTel0=
 =3fwV
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
 "Some fixes and cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails
  vhost-vdpa: fix use-after-free of v->config_ctx
  vhost: Fix vhost_vq_reset()
  vhost_vdpa: fix the missing irq_bypass_unregister_producer() invocation
  vdpa_sim: Skip typecasting from void*
  virtio: remove export for virtio_config_{enable, disable}
  virtio-mmio: Use to_virtio_mmio_device() to simply code
  vdpa: set the virtqueue num during register
2021-03-18 11:20:35 -07:00
Jakub Kicinski
dcc32f4f18 ipv6: weaken the v4mapped source check
This reverts commit 6af1799aaf.

Commit 6af1799aaf ("ipv6: drop incoming packets having a v4mapped
source address") introduced an input check against v4mapped addresses.
Use of such addresses on the wire is indeed questionable and not
allowed on public Internet. As the commit pointed out

  https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02

lists potential issues.

Unfortunately there are applications which use v4mapped addresses,
and breaking them is a clear regression. For example v4mapped
addresses (or any semi-valid addresses, really) may be used
for uni-direction event streams or packet export.

Since the issue which sparked the addition of the check was with
TCP and request_socks in particular push the check down to TCPv6
and DCCP. This restores the ability to receive UDPv6 packets with
v4mapped address as the source.

Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the
user-visible changes.

Fixes: 6af1799aaf ("ipv6: drop incoming packets having a v4mapped source address")
Reported-by: Sunyi Shao <sunyishao@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 11:19:23 -07:00
Wanpeng Li
f4e61f0c9a x86/kvm: Fix broken irq restoration in kvm_wait
After commit 997acaf6b4 (lockdep: report broken irq restoration), the guest
splatting below during boot:

 raw_local_irq_restore() called with IRQs enabled
 WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30
 Modules linked in: hid_generic usbhid hid
 CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25
 RIP: 0010:warn_bogus_irq_restore+0x26/0x30
 Call Trace:
  kvm_wait+0x76/0x90
  __pv_queued_spin_lock_slowpath+0x285/0x2e0
  do_raw_spin_lock+0xc9/0xd0
  _raw_spin_lock+0x59/0x70
  lockref_get_not_dead+0xf/0x50
  __legitimize_path+0x31/0x60
  legitimize_root+0x37/0x50
  try_to_unlazy_next+0x7f/0x1d0
  lookup_fast+0xb0/0x170
  path_openat+0x165/0x9b0
  do_filp_open+0x99/0x110
  do_sys_openat2+0x1f1/0x2e0
  do_sys_open+0x5c/0x80
  __x64_sys_open+0x21/0x30
  do_syscall_64+0x32/0x50
  entry_SYSCALL_64_after_hwframe+0x44/0xae

The new consistency checking,  expects local_irq_save() and
local_irq_restore() to be paired and sanely nested, and therefore expects
local_irq_restore() to be called with irqs disabled.
The irqflags handling in kvm_wait() which ends up doing:

	local_irq_save(flags);
	safe_halt();
	local_irq_restore(flags);

instead triggers it.  This patch fixes it by using
local_irq_disable()/enable() directly.

Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18 13:58:14 -04:00
Wanpeng Li
c2162e13d6 KVM: X86: Fix missing local pCPU when executing wbinvd on all dirty pCPUs
In order to deal with noncoherent DMA, we should execute wbinvd on
all dirty pCPUs when guest wbinvd exits to maintain data consistency.
smp_call_function_many() does not execute the provided function on the
local core, therefore replace it by on_each_cpu_mask().

Reported-by: Nadav Amit <namit@vmware.com>
Cc: Nadav Amit <namit@vmware.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1615517151-7465-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18 13:55:34 -04:00
Sean Christopherson
b318e8decf KVM: x86: Protect userspace MSR filter with SRCU, and set atomically-ish
Fix a plethora of issues with MSR filtering by installing the resulting
filter as an atomic bundle instead of updating the live filter one range
at a time.  The KVM_X86_SET_MSR_FILTER ioctl() isn't truly atomic, as
the hardware MSR bitmaps won't be updated until the next VM-Enter, but
the relevant software struct is atomically updated, which is what KVM
really needs.

Similar to the approach used for modifying memslots, make arch.msr_filter
a SRCU-protected pointer, do all the work configuring the new filter
outside of kvm->lock, and then acquire kvm->lock only when the new filter
has been vetted and created.  That way vCPU readers either see the old
filter or the new filter in their entirety, not some half-baked state.

Yuan Yao pointed out a use-after-free in ksm_msr_allowed() due to a
TOCTOU bug, but that's just the tip of the iceberg...

  - Nothing is __rcu annotated, making it nigh impossible to audit the
    code for correctness.
  - kvm_add_msr_filter() has an unpaired smp_wmb().  Violation of kernel
    coding style aside, the lack of a smb_rmb() anywhere casts all code
    into doubt.
  - kvm_clear_msr_filter() has a double free TOCTOU bug, as it grabs
    count before taking the lock.
  - kvm_clear_msr_filter() also has memory leak due to the same TOCTOU bug.

The entire approach of updating the live filter is also flawed.  While
installing a new filter is inherently racy if vCPUs are running, fixing
the above issues also makes it trivial to ensure certain behavior is
deterministic, e.g. KVM can provide deterministic behavior for MSRs with
identical settings in the old and new filters.  An atomic update of the
filter also prevents KVM from getting into a half-baked state, e.g. if
installing a filter fails, the existing approach would leave the filter
in a half-baked state, having already committed whatever bits of the
filter were already processed.

[*] https://lkml.kernel.org/r/20210312083157.25403-1-yaoyuan0329os@gmail.com

Fixes: 1a155254ff ("KVM: x86: Introduce MSR filtering")
Cc: stable@vger.kernel.org
Cc: Alexander Graf <graf@amazon.com>
Reported-by: Yuan Yao <yaoyuan0329os@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210316184436.2544875-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18 13:55:14 -04:00
Emanuele Giuseppe Esposito
3df2252436 selftests: kvm: add set_boot_cpu_id test
Test for the KVM_SET_BOOT_CPU_ID ioctl.
Check that it correctly allows to change the BSP vcpu.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318151624.490861-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18 13:55:14 -04:00
Emanuele Giuseppe Esposito
e2c12909ae selftests: kvm: add _vm_ioctl
As in kvm_ioctl and _kvm_ioctl, add
the respective _vm_ioctl for vm_ioctl.

_vm_ioctl invokes an ioctl using the vm fd,
leaving the caller to test the result.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318151624.490861-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18 13:55:14 -04:00
Mark Brown
bb9faeccbd
Merge series "ASoC: codecs: remove cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Lots of small fixes in various codec drivers that should have no
functional impact.

Pierre-Louis Bossart (23):
  ASoC: ab8500-codec: remove useless structure
  ASoC: ad1836: remove useless return
  ASoC: adau1977: remove useless return
  ASoC: cros_ec_codec: remove null pointer dereference warning
  ASoC: cx2070x: remove useless assignment
  ASoC: cx2070x: remove duplicate else branch
  ASoC: da7219-aad: remove useless initialization
  ASoC: hdac_hdmi: remove useless initializations
  ASoC: hdac_hdmi: align function arguments
  ASoC: hdmi-codec: remove useless initialization
  ASoC: hdmi-codec: remove unused spk_mask member
  ASoC: max98090: remove useless assignment
  ASoC: mt6358: remove useless initializations
  ASoC: mt6359: remove useless assignment
  ASoC: nau8825: remove useless assignment
  ASoC: pcm1681: remove useless assignment
  ASoC: sigmadsp: align function prototype
  ASoC: sti-sas: remove unused struct members
  ASoC: tas2562: remove useless assignment
  ASoC: tas2562: remove warning on return value
  ASoC: tas2770: remove useless initialization
  ASoC: tlv320dac33: clarify expression
  ASoC: tscs454: remove useless test on PLL disable

 sound/soc/codecs/ab8500-codec.c  |  7 -------
 sound/soc/codecs/ad1836.c        |  2 --
 sound/soc/codecs/adau1977.c      |  2 --
 sound/soc/codecs/cros_ec_codec.c |  2 +-
 sound/soc/codecs/cx2072x.c       | 11 ++++-------
 sound/soc/codecs/da7219-aad.c    |  2 +-
 sound/soc/codecs/hdac_hdmi.c     | 14 +++++++-------
 sound/soc/codecs/hdac_hdmi.h     |  2 +-
 sound/soc/codecs/hdmi-codec.c    |  3 +--
 sound/soc/codecs/max98090.c      |  2 +-
 sound/soc/codecs/mt6358.c        |  4 ++--
 sound/soc/codecs/mt6359.c        |  4 ++--
 sound/soc/codecs/nau8825.c       |  2 +-
 sound/soc/codecs/pcm1681.c       |  2 +-
 sound/soc/codecs/sigmadsp.h      |  2 +-
 sound/soc/codecs/sti-sas.c       |  3 ---
 sound/soc/codecs/tas2562.c       |  3 +--
 sound/soc/codecs/tas2770.c       |  2 +-
 sound/soc/codecs/tlv320dac33.c   |  2 +-
 sound/soc/codecs/tscs454.c       |  7 ++++++-
 20 files changed, 32 insertions(+), 46 deletions(-)

--
2.25.1
2021-03-18 17:52:22 +00:00
Mark Brown
cdd23ae6e6
Merge series "Fix reset controls and RPM of NVIDIA Tegra ASoC drivers" from Dmitry Osipenko <digetx@gmail.com>:
Hi,

This series adds missing hardware reset controls to I2S and AC97 drivers,
corrects runtime PM usage and drivers probe/remove order. Currently drivers
happen to work properly because reset is implicitly deasserted by tegra-clk
driver, but clk driver shouldn't touch the resets and we need to fix it
because this breaks other Tegra drivers. Previously we fixed the resets of
the AHUB and HDMI codec drivers, but turned out that we missed the I2C and
AC97 drivers.

Thanks to Paul Fertser for testing the pending clk patches and finding
that audio got broken on Tegra20 AC100 netbook because of the missing I2S
reset.

Changelog:

v5: - After taking another look at the drivers I noticed couple more
      things that could be improved. These new patches correct runtime PM
      and probe/remove order of the drivers:

        ASoC: tegra20: spdif: Correct driver removal order
        ASoC: tegra20: spdif: Remove handing of disabled runtime PM
        ASoC: tegra20: i2s: Add system level suspend-resume callbacks
        ASoC: tegra20: i2s: Correct driver removal order
        ASoC: tegra20: i2s: Use devm_clk_get()
        ASoC: tegra20: i2s: Remove handing of disabled runtime PM
        ASoC: tegra30: i2s: Correct driver removal order
        ASoC: tegra30: i2s: Use devm_clk_get()
        ASoC: tegra30: i2s: Remove handing of disabled runtime PM
        ASoC: tegra30: ahub: Reset global variable
        ASoC: tegra30: ahub: Correct suspend-resume callbacks
        ASoC: tegra30: ahub: Remove handing of disabled runtime PM

v4: - Added missing prototype for reset_control_bulk_put().

v3: - Fixed reset stubs for !CONFIG_RESET_CONTROLLER.

v2: - After some more testing I found that I2S control logic doesn't require
      I2S clock to be enabled for resetting. Hence it's fine to have I2S to
      be reset by parent AHUB driver, so I dropped "tegra30: i2s: Add reset
      control" patch.

    - While I was double-checking resets on Tegra30, I found that that
      Tegra30 I2S driver has a broken runtime PM which doesn't restore
      hardware state on resume and it's lost after AHUB RPM-resume.
      Thus, added this new patch "tegra30: i2s: Restore hardware state
      on runtime PM resume".

    - Added new patches which switch AHUB driver to use reset-bulk API.
      I took the RFC patch from Philipp Zabel, fixed it and added
      devm_reset_control_bulk_optional_get_exclusive_released() that
      will be useful for further Tegra GPU patches. This is a minor
      improvement which makes code cleaner.

Dmitry Osipenko (16):
  ASoC: tegra20: ac97: Add reset control
  ASoC: tegra20: i2s: Add reset control
  ASoC: tegra30: i2s: Restore hardware state on runtime PM resume
  ASoC: tegra30: ahub: Switch to use reset-bulk API
  ASoC: tegra20: spdif: Correct driver removal order
  ASoC: tegra20: spdif: Remove handing of disabled runtime PM
  ASoC: tegra20: i2s: Add system level suspend-resume callbacks
  ASoC: tegra20: i2s: Correct driver removal order
  ASoC: tegra20: i2s: Use devm_clk_get()
  ASoC: tegra20: i2s: Remove handing of disabled runtime PM
  ASoC: tegra30: i2s: Correct driver removal order
  ASoC: tegra30: i2s: Use devm_clk_get()
  ASoC: tegra30: i2s: Remove handing of disabled runtime PM
  ASoC: tegra30: ahub: Reset global variable
  ASoC: tegra30: ahub: Correct suspend-resume callbacks
  ASoC: tegra30: ahub: Remove handing of disabled runtime PM

Philipp Zabel (1):
  reset: Add reset_control_bulk API

 drivers/reset/core.c            | 215 ++++++++++++++++++++++
 include/linux/reset.h           | 315 ++++++++++++++++++++++++++++++++
 sound/soc/tegra/tegra20_ac97.c  |  21 +++
 sound/soc/tegra/tegra20_ac97.h  |   1 +
 sound/soc/tegra/tegra20_i2s.c   |  60 +++---
 sound/soc/tegra/tegra20_i2s.h   |   1 +
 sound/soc/tegra/tegra20_spdif.c |  16 +-
 sound/soc/tegra/tegra30_ahub.c  | 168 ++++++-----------
 sound/soc/tegra/tegra30_ahub.h  |   5 +-
 sound/soc/tegra/tegra30_i2s.c   |  65 ++-----
 10 files changed, 667 insertions(+), 200 deletions(-)

--
2.30.2

base-commit: a38fd87484
2021-03-18 17:52:21 +00:00
Linus Torvalds
8ff0f3bf5d Merge branch 'iomap-5.12-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
 "A single fix to the iomap code which fixes some drama when someone
  gives us a {de,ma}liciously fragmented swap file"

* 'iomap-5.12-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Fix negative assignment to unsigned sis->pages in iomap_swapfile_activate
2021-03-18 10:37:30 -07:00
Emanuele Giuseppe Esposito
77a3aa26a0 selftests: kvm: add get_msr_index_features
Test the KVM_GET_MSR_FEATURE_INDEX_LIST
and KVM_GET_MSR_INDEX_LIST ioctls.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318145629.486450-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18 13:30:49 -04:00
Steven Rostedt (VMware)
9a6944fee6 tracing: Add a verifier to check string pointers for trace events
It is a common mistake for someone writing a trace event to save a pointer
to a string in the TP_fast_assign() and then display that string pointer
in the TP_printk() with %s. The problem is that those two events may happen
a long time apart, where the source of the string may no longer exist.

The proper way to handle displaying any string that is not guaranteed to be
in the kernel core rodata section, is to copy it into the ring buffer via
the __string(), __assign_str() and __get_str() helper macros.

Add a check at run time while displaying the TP_printk() of events to make
sure that every %s referenced is safe to dereference, and if it is not,
trigger a warning and only show the address of the pointer, and the
dereferenced string if it can be safely retrieved with a
strncpy_from_kernel_nofault() call.

In order to not have to copy the parsing of vsnprintf() formats, or even
exporting its code, the verifier relies on vsnprintf() being able to
modify the va_list that is passed to it, and it remains modified after it
is called. This is the case for some architectures like x86_64, but other
architectures like x86_32 pass the va_list to vsnprintf() as a value not a
reference, and the verifier can not use it to parse the non string
arguments. Thus, at boot up, it is checked if vsnprintf() modifies the
passed in va_list or not, and a static branch will disable the verifier if
it's not compatible.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:27 -04:00
Steven Rostedt (VMware)
f2616c772c seq_buf: Add seq_buf_terminate() API
In the case that the seq_buf buffer needs to be printed directly, add a way
to make sure that the buffer is safe to read by forcing a nul terminating
character at the end of the string, or the last byte of the buffer if the
string has overflowed.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:27 -04:00
Steven Rostedt (VMware)
5013f454a3 tracing: Add check of trace event print fmts for dereferencing pointers
Trace events record data into the ring buffer at the time of the event. The
trace event has a printf logic to display the recorded data at a much later
time when the user reads the trace file. This makes using dereferencing
pointers unsafe if the dereferenced pointer points to the original source.
The safe way to handle this is to create an array within the trace event and
copy the source into the array. Then the dereference pointer may point to
that array.

As this is a easy mistake to make, a check is added to examine all trace
event print fmts to make sure that they are safe to use. This only checks
the various %p* dereferenced pointers like %pB, %pR, etc. It does not handle
dereferencing of strings, as there are some use cases that are OK to
dereference the source. That will be dealt with differently.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Colin Ian King
e0196ae732 ftrace: Fix spelling mistake "disabed" -> "disabled"
There is a spelling mistake in a comment, fix it.

Link: https://lkml.kernel.org/r/20210311094022.5978-1-colin.king@canonical.com

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Xu Wang
421d9d1bea tools/latency-collector: Remove unneeded semicolon
Fix semicolon.cocci warning:
tools/tracing/latency/latency-collector.c:1021:2-3: Unneeded semicolon

Link: https://lkml.kernel.org/r/20210308022459.59881-1-vulab@iscas.ac.cn

Reviewed-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de>
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Cao jin
2b7d2fe76f bootconfig: Update prototype of setup_boot_config()
Parameter "cmdline" has no use, drop it.

Link: https://lkml.kernel.org/r/20210311085213.27680-1-jojing64@gmail.com

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Cao jin <jojing64@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Steven Rostedt (VMware)
d8279bfc5e tracing: Add tracing_event_time_stamp() API
Add a tracing_event_time_stamp() API that checks if the event passed in is
not on the ring buffer but a pointer to the per CPU trace_buffered_event
which does not have its time stamp set yet.

If it is a pointer to the trace_buffered_event, then just return the
current time stamp that the ring buffer would produce.

Otherwise, return the time stamp from the event.

Link: https://lkml.kernel.org/r/20210316164114.131996180@goodmis.org

Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Steven Rostedt (VMware)
a948c69d6f ring-buffer: Add verifier for using ring_buffer_event_time_stamp()
The ring_buffer_event_time_stamp() must be only called by an event that has
not been committed yet, and is on the buffer that is passed in. This was
used to help debug converting the histogram logic over to using the new
time stamp code, and was proven to be very useful.

Add a verifier that can check that this is the case, and extra WARN_ONs to
catch unexpected use cases.

Link: https://lkml.kernel.org/r/20210316164113.987294354@goodmis.org

Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Steven Rostedt (VMware)
b94bc80df6 tracing: Use a no_filter_buffering_ref to stop using the filter buffer
Currently, the trace histograms relies on it using absolute time stamps to
trigger the tracing to not use the temp buffer if filters are set. That's
because the histograms need the full timestamp that is saved in the ring
buffer. That is no longer the case, as the ring_buffer_event_time_stamp()
can now return the time stamp for all events without all triggering a full
absolute time stamp.

Now that the absolute time stamp is an unrelated dependency to not using
the filters. There's nothing about having absolute timestamps to keep from
using the filter buffer. Instead, change the interface to explicitly state
to disable filter buffering that the histogram logic can use.

Link: https://lkml.kernel.org/r/20210316164113.847886563@goodmis.org

Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Steven Rostedt (VMware)
efe6196a6b ring-buffer: Allow ring_buffer_event_time_stamp() to return time stamp of all events
Currently, ring_buffer_event_time_stamp() only returns an accurate time
stamp of the event if it has an absolute extended time stamp attached to
it. To make it more robust, use the event_stamp() in case the event does
not have an absolute value attached to it.

This will allow ring_buffer_event_time_stamp() to be used in more cases
than just histograms, and it will also allow histograms to not require
including absolute values all the time.

Link: https://lkml.kernel.org/r/20210316164113.704830885@goodmis.org

Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Steven Rostedt (VMware)
b47e330231 tracing: Pass buffer of event to trigger operations
The ring_buffer_event_time_stamp() is going to be updated to extract the
time stamp for the event without needing it to be set to have absolute
values for all events. But to do so, it needs the buffer that the event is
on as the buffer saves information for the event before it is committed to
the buffer.

If the trace buffer is disabled, a temporary buffer is used, and there's
no access to this buffer from the current histogram triggers, even though
it is passed to the trace event code.

Pass the buffer that the event is on all the way down to the histogram
triggers.

Link: https://lkml.kernel.org/r/20210316164113.542448131@goodmis.org

Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:26 -04:00
Steven Rostedt (VMware)
8672e4948d ring-buffer: Add a event_stamp to cpu_buffer for each level of nesting
Add a place to save the current event time stamp for each level of nesting.
This will be used to retrieve the time stamp of the current event before it
is committed.

Link: https://lkml.kernel.org/r/20210316164113.399089673@goodmis.org

Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:25 -04:00
Steven Rostedt (VMware)
e20044f7e9 ring-buffer: Separate out internal use of ring_buffer_event_time_stamp()
The exported use of ring_buffer_event_time_stamp() is going to become
different than how it is used internally. Move the internal logic out into a
static function called rb_event_time_stamp(), and have the internal callers
call that instead.

Link: https://lkml.kernel.org/r/20210316164113.257790481@goodmis.org

Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:58:25 -04:00
Steven Rostedt (VMware)
83b62687a0 workqueue/tracing: Copy workqueue name to buffer in trace event
The trace event "workqueue_queue_work" references an unsafe string in
dereferencing the name of the workqueue. As the name is allocated, it
could later be freed, and the pointer to that string could stay on the
tracing buffer. If the trace buffer is read after the string is freed, it
will reference an unsafe pointer.

I added a new verifier to make sure that all strings referenced in the
output of the trace buffer is safe to read and this triggered on the
workqueue_queue_work trace event:

workqueue_queue_work: work struct=00000000b2b235c7 function=gc_worker workqueue=(0xffff888100051160:events_power_efficient)[UNSAFE-MEMORY] req_cpu=256 cpu=1
workqueue_queue_work: work struct=00000000c344caec function=flush_to_ldisc workqueue=(0xffff888100054d60:events_unbound)[UNSAFE-MEMORY] req_cpu=256 cpu=4294967295
workqueue_queue_work: work struct=00000000b2b235c7 function=gc_worker workqueue=(0xffff888100051160:events_power_efficient)[UNSAFE-MEMORY] req_cpu=256 cpu=1
workqueue_queue_work: work struct=000000000b238b3f function=vmstat_update workqueue=(0xffff8881000c3760:mm_percpu_wq)[UNSAFE-MEMORY] req_cpu=1 cpu=1

Also, if this event is read via a user space application like perf or
trace-cmd, the name would only be an address and useless information:

workqueue_queue_work: work struct=0xffff953f80b4b918 function=disk_events_workfn workqueue=ffff953f8005d378 req_cpu=8192 cpu=5

Cc: Zqiang <qiang.zhang@windriver.com>
Cc: Tejun Heo <tj@kernel.org>
Fixes: 7bf9c4a88e ("workqueue: tracing the name of the workqueue instead of it's address")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-18 12:57:37 -04:00
Richard Gong
2e8496f31d firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
aligns with the firmware settings.

Fixes: 36847f9e3e ("firmware: stratix10-svc: correct reconfig flag and timeout values")
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
2021-03-18 09:55:12 -07:00