Currently we are allocating high-order page for EQs. In case of
fragmented system, VF hot remove/add in VMs for example, there isn't
enough contiguous memory for EQs allocation, which results in crashing
of the VM.
Therefore, use order-0 fragments for the EQ allocations instead.
Performance tests:
ConnectX-5 100Gbps, CPU: Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
Performance tests show no sensible degradation.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently we operate in a mode where each eswitch manager has a separate
FDB. In order to combine these multiple FDBs we expose new caps to allow
this:
- Set root flow table which isn't native.
- Set FDB a different selection mode when in LAG mode.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Now that each representor stores a pointer to the managing E-Switch
use that information when creating the send-to-vport rules.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Now that a pointer to the managing E-Switch is stored in the representor
use it.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Store the managing E-Switch of each representor. This will be used
when a representor is created on eswitch manager 0 but the vport
belongs to eswitch manager 1.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Match on the vhca id of the E-Switch owner when creating the send-to-vport
representor rules.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The code related to health->recover_work was removed in
commit 63cbc552ee ("net/mlx5: Handle SW reset of FW in error flow")
Fix struct mlx5_core_health accordingly.
Signed-off-by: Mikhael Goikhman <migo@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Cleanup W=1 warning:
drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c:49:
warning: expecting prototype for Set lag port affinity().
Prototype was for mlx5_lag_set_port_affinity() instead
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Request dma channel from specific dma controller instead of generic
dma controller list, otherwise, may get the wrong dma controller
if there are multi dma controllers such as i.MX8MP.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614935977-21638-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on which AIF is used the UCM profile needs to setup
a different path through the rt5640's "Digital Mixer Path" graph.
ATM the UCM profiles solve this by just enabling paths to the outputs /
from the input from both AIF1 and AIF2 and then relying on the DAPM
framework to power-down the parts of the graph connected to the
unused AIF.
But in order to be able to use hardware-volumecontrol and to use
the hardware mute controls, which are necessary for mute LED control,
the UCM profiles need to know which AIF is actually being used.
Add a new "aif:1" or "aif:2" part to the component string to provide
info about the used AIF to userspace / to the UCM profiles.
Note the size of byt_rt5640_components is not increased because the
size of 32 chars already is big enough.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307150503.34906-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename 'Mono DAC Playback Volume' to 'DAC2 Playback Volume' and move it
from rt5640_specific_snd_controls[] to rt5640_snd_controls[].
The RT5640_DAC2_DIG_VOL register controlled by this mixer-element has
nothing to do with the Mono (Amplified) output which is only available
on the ALC5640 chip and not on the ALC5642 chip.
The RT5640_DAC2_DIG_VOL volume-control is the main volume control for
audio coming from the I2S2 / AIF2 input of the chip and as such is also
available on the ALC5642.
This commit results in the following userspace visible changes:
1. On devices with an ACL5640 codec, the 'Mono DAC Playback Volume'
control is renamed to 'DAC2 Playback Volume' allowing the alsa-lib
mixer code to properly group it with the 'DAC2 Playback Switch' which
is controlling the mute bits in the RT5640_DAC2_DIG_VOL register.
Note the removal of the 'Mono DAC Playback Volume' is not an issue for
userspace because the UCM profiles do not use it (the UCM profiles are
shared betweent the 5640 and 5642 and only the 5640 had this control).
2. On devices with an ACL5642 codec, there now will be a new
'DAC2 Playback Volume', grouped with the 'DAC2 Playback Switch'
Having a complete 'DAC2 Playback Volume' / 'DAC2 Playback Switch' pair
on both variants will allow enabling hardware-volume control by
setting the UCM PlaybackMasterElem to "DAC2" on devices where the
I2S2/AIF2 interface of the codec is used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307150503.34906-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/samsung/tm2_wm5110.c:605:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
sound/soc/samsung/tm2_wm5110.c:554:7: note: ret is assigned
ret = of_parse_phandle_with_args(dev->of_node, "i2s-controller",
^
sound/soc/samsung/tm2_wm5110.c:605:6: note: ret is overwritten
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
The args is a stack variable, so it could have junk (uninitialized)
therefore args.np could have a non-NULL and random value even though
property was missing. Later could trigger invalid pointer dereference.
There's no need to check for args.np because args.np won't be
initialized on errors.
Fixes: 8d1513cef5 ("ASoC: samsung: Add support for HDMI audio on TM2 board")
Cc: <stable@vger.kernel.org>
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312180231.2741-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"either" is outside the parentheses, so the matching "or" should be too.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add a flag to mark OPPs that are not referenced by he OPP
core any more to prevent OPPs from being freed prematurely
by mistake (Beata Michalska).
- Add ARM Vexpress platforms to the cpufreq-dt-platdev blacklist
since the actual scaling of them is handled elsewhere (Sudeep
Holla).
- Fix a function return value check and a possible use-after-free
in the qcom-hw cpufreq driver (Shawn Guo, Wei Yongjun).
-----BEGIN PGP SIGNATURE-----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=w4th
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an operating performance point (OPP) reference counting
issue and three issues in ARM cpufreq drivers.
Specifics:
- Add a flag to mark OPPs that are not referenced by he OPP core any
more to prevent OPPs from being freed prematurely by mistake (Beata
Michalska).
- Add ARM Vexpress platforms to the cpufreq-dt-platdev blacklist
since the actual scaling of them is handled elsewhere (Sudeep
Holla).
- Fix a function return value check and a possible use-after-free in
the qcom-hw cpufreq driver (Shawn Guo, Wei Yongjun)"
* tag 'pm-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Don't drop extra references to OPPs accidentally
cpufreq: blacklist Arm Vexpress platforms in cpufreq-dt-platdev
cpufreq: qcom-hw: Fix return value check in qcom_cpufreq_hw_cpu_init()
cpufreq: qcom-hw: fix dereferencing freed memory 'data'
The "backlog" argument in listen() specifies
the maximom length of pending connections,
so the accept queue should be considered full
if there are exactly "backlog" elements.
Signed-off-by: liuyacan <yacanliu@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ns can be NULL at this point, and my move of the check from
the original patch by Chaitanya broke this.
Fixes: 0ec84df495 ("nvme-core: check ctrl css before setting up zns")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 2055a99da8.
This change rejects legitimate configurations.
A slave doesn't need to exist nor implement ndo_slave_setup.
Signed-off-by: David S. Miller <davem@davemloft.net>
No surprise here, only a collection of device-specific fixes for
USB-audio and HD-audio at this time.
-----BEGIN PGP SIGNATURE-----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=pNPn
-----END PGP SIGNATURE-----
Merge tag 'sound-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No surprise here, only a collection of device-specific fixes for
USB-audio and HD-audio at this time"
* tag 'sound-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Cancel pending works before suspend
ALSA: hda: Avoid spurious unsol event handling during S3/S4
ALSA: hda: Flush pending unsolicited events before suspend
ALSA: usb-audio: fix use after free in usb_audio_disconnect
ALSA: usb-audio: fix NULL ptr dereference in usb_audio_probe
ALSA: hda/ca0132: Add Sound BlasterX AE-5 Plus support
ALSA: hda: Drop the BATCH workaround for AMD controllers
ALSA: hda/conexant: Add quirk for mute LED control on HP ZBook G5
ALSA: usb-audio: Apply the control quirk to Plantronics headsets
ALSA: usb-audio: Fix "cannot get freq eq" errors on Dell AE515 sound bar
ALSA: hda: ignore invalid NHLT table
ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()
ALSA: usb: Add Plantronics C320-M USB ctrl msg delay quirk
A small collection fo driver specific fixes that have arrived since the
merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmBLvF4ACgkQJNaLcl1U
h9AVGwf/Vwr1w0r4P4eHKFc7W3ujEdK7+vSM4GoS+U/CAokEzDcJtuzzqH00iDUA
poPIQNrylq0rjcurjKuMAko4cfg0WtlcYvcQcyL8hSP5Cg633XqJgJ7mUrOv5RQE
nUYh/SNop5ACMlE/N3umt+nYIlFDSDcVq0fHmEcT4tYCh3aFKxlCIzBx/Vt8WOoW
7/pO4n+vP55ciSyKS5lgaga8Qkz+Gy0+7bv5aK2swYrWU08lI5Ts5aRtGRmZmvI9
4pc2/8AeuOuujWZgaRzuLEKJfnKgJv0mRDIHzQBx/wgQtrm91FHE96WTuQ/88mKB
6aMjiugtPvSEscZ/PROX3xRm+dZoBg==
=Ce9K
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A small collection fo driver specific fixes that have arrived since
the merge window"
* tag 'regulator-fix-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6315: Fix off-by-one for .n_voltages
regulator: rt4831: Fix return value check in rt4831_regulator_probe()
regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting
regulator: qcom-rpmh: Use correct buck for S1C regulator
regulator: qcom-rpmh: Correct the pmic5_hfsmps515 buck
regulator: pca9450: Fix return value when failing to get sd-vsel GPIO
regulator: mt6315: Return REGULATOR_MODE_INVALID for invalid mode
- fix a use-after-free in __configfs_open_file
(Daiyue Zhang)
-----BEGIN PGP SIGNATURE-----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=QljJ
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-5.12' of git://git.infradead.org/users/hch/configfs
Pull configfs fix from Christoph Hellwig:
- fix a use-after-free in __configfs_open_file (Daiyue Zhang)
* tag 'configfs-for-5.12' of git://git.infradead.org/users/hch/configfs:
configfs: fix a use-after-free in __configfs_open_file
-----BEGIN PGP SIGNATURE-----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=6g8z
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.12-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.12-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: bypass log flush if the journal is not live
gfs2: bypass signal_our_withdraw if no journal
gfs2: fix use-after-free in trans_drain
gfs2: make function gfs2_make_fs_ro() to void type
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmBLU98QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNEhpB/wMahRmJQvjJtt/PqKU9m46tRbHRT5PC2WQ
256DoYtexSrGa6DrBoSteUsaPuRo3YcfDnXf1wbTYikoXoKxbLvm/9IQivfyrd3S
M4DjeaemhcZdg6YKrs/0s2UOzPV8O3kKWfs58gJ2oP/xHA7uqcZJxlIDd7H4/bX+
M0wQvBnJEEb9mg3Hxo2WZLRUKK3nPtZ5hGz9RADOHkyCt+jPr3UtAe69iZcQ4Udd
X2z3Dc1CZf3VF9Ujkylllqxo2eaLKXGie7r77o1AgXwPEedZD+Q9vn/viVuluRcc
slZQyW/kRRGCZ92RT2DwLZsixsBKJtZxj+AEoJSBIrsCUUXXP4xv
=e3YJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a smattering of changes all over the place which we've
acrued since -rc1. To my knowledge, there aren't any pending issues at
the moment, but there's still plenty of time for something else to
crop up...
Summary:
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe()
arm64: mm: remove unused __cpu_uses_extended_idmap[_level()]
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
arm64: perf: Fix 64-bit event counter read truncation
arm64/mm: Fix __enable_mmu() for new TGRAN range values
kselftest: arm64: Fix exit code of sve-ptrace
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64/mm: Reorganize pfn_valid()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER
arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE
arm64: Drop support for CMDLINE_EXTEND
arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYEsmRgAKCRCAXGG7T9hj
vsQ9AP9oN1PKbTGn9U6FR/yJtMuD2XuX8a86PnMI8iM/bnox5QEA/kLIOBknM/nF
bPDfBcb72BERKX+83qtd5153zcbhww4=
=a/rf
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fix series and a single cleanup:
- a small cleanup patch to remove unneeded symbol exports
- a series to cleanup Xen grant handling (avoiding allocations in
some cases, and using common defines for "invalid" values)
- a series to address a race issue in Xen event channel handling"
* tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/gntdev: don't needlessly use kvcalloc()
Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}
Xen/gntdev: don't needlessly allocate k{,un}map_ops[]
Xen: drop exports of {set,clear}_foreign_p2m_mapping()
xen/events: avoid handling the same event on two cpus at the same time
xen/events: don't unmask an event channel when an eoi is pending
xen/events: reset affinity of 2-level event when tearing it down
The Asus T100TAF uses the same jack-detect settings as the T100TA,
this has been confirmed on actual hardware.
Add these settings to the T100TAF quirks to enable jack-detect support
on the T100TAF.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312114850.13832-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A while back I started the introduction of the 'spi_delay' data type:
https://lore.kernel.org/linux-spi/20190926105147.7839-1-alexandru.ardelean@analog.com/
Users of the 'delay_usecs' were removed from drivers.
Now it's time to remove the 'delay_usecs' from the SPI subsystem and use
only the 'delay' field.
This changeset adapts all SPI drivers to do without 'delay_usecs'.
Additionally, for greybus we need to adapt it to use the 'delay' in
nano-seconds and convert it to micro-seconds.
Alexandru Ardelean (10):
spi: spi-axi-spi-engine: remove usage of delay_usecs
spi: bcm63xx-spi: don't check 'delay_usecs' field
spi: spi-bcm-qspi: replace 'delay_usecs' with 'delay.value' check
spi: spi-sh: replace 'delay_usecs' with 'delay.value' in pr_debug
spi: spi-tegra20-flash: don't check 'delay_usecs' field for spi
transfer
staging: greybus: spilib: use 'spi_delay_to_ns' for getting xfer delay
spi: spi-falcon: remove check for 'delay_usecs'
spi: fsl-espi: remove usage of 'delay_usecs' field
spi: core: remove 'delay_usecs' field from spi_transfer
spi: docs: update info about 'delay_usecs'
Documentation/spi/spi-summary.rst | 7 +++++--
drivers/spi/spi-axi-spi-engine.c | 12 ++++--------
drivers/spi/spi-bcm-qspi.c | 2 +-
drivers/spi/spi-bcm63xx.c | 2 +-
drivers/spi/spi-falcon.c | 2 +-
drivers/spi/spi-fsl-espi.c | 17 +++++------------
drivers/spi/spi-sh.c | 4 ++--
drivers/spi/spi-tegra20-sflash.c | 3 +--
drivers/spi/spi.c | 1 -
drivers/staging/greybus/spilib.c | 5 ++++-
include/linux/spi/spi.h | 12 ------------
11 files changed, 24 insertions(+), 43 deletions(-)
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.orghttp://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
Advancing the timer expiration should only be necessary on guest initiated
writes. When we cancel the timer and clear .pending during state restore,
clear expired_tscdeadline as well.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1614818118-965-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If mmu_lock is held for write, don't bother setting !PRESENT SPTEs to
REMOVED_SPTE when recursively zapping SPTEs as part of shadow page
removal. The concurrent write protections provided by REMOVED_SPTE are
not needed, there are no backing page side effects to record, and MMIO
SPTEs can be left as is since they are protected by the memslot
generation, not by ensuring that the MMIO SPTE is unreachable (which
is racy with respect to lockless walks regardless of zapping behavior).
Skipping !PRESENT drastically reduces the number of updates needed to
tear down sparsely populated MMUs, e.g. when tearing down a 6gb VM that
didn't touch much memory, 6929/7168 (~96.6%) of SPTEs were '0' and could
be skipped.
Avoiding the write itself is likely close to a wash, but avoiding
__handle_changed_spte() is a clear-cut win as that involves saving and
restoring all non-volatile GPRs (it's a subtly big function), as well as
several conditional branches before bailing out.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210310003029.1250571-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 88
On-line CPU(s) list: 0-63
Off-line CPU(s) list: 64-87
# cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-5.10.0-rc3-tlinux2-0050+ root=/dev/mapper/cl-root ro
rd.lvm.lv=cl/root rhgb quiet console=ttyS0 LANG=en_US .UTF-8 no-kvmclock-vsyscall
# echo 1 > /sys/devices/system/cpu/cpu76/online
-bash: echo: write error: Cannot allocate memory
The per-cpu vsyscall pvclock data pointer assigns either an element of the
static array hv_clock_boot (#vCPU <= 64) or dynamically allocated memory
hvclock_mem (vCPU > 64), the dynamically memory will not be allocated if
kvmclock vsyscall is disabled, this can result in cpu hotpluged fails in
kvmclock_setup_percpu() which returns -ENOMEM. It's broken for no-vsyscall
and sometimes you end up with vsyscall disabled if the host does something
strange. This patch fixes it by allocating this dynamically memory
unconditionally even if vsyscall is disabled.
Fixes: 6a1cac56f4 ("x86/kvm: Use __bss_decrypted attribute in shared variables")
Reported-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: stable@vger.kernel.org#v4.19-rc5+
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1614130683-24137-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hi Mark
These are v2 of soc-pcm cleanup patches.
These has no relationship to each other.
My 1 concern is [3/8] patch. I think it is no problem,
but I'm not 100% sure why current code was such code.
Pierre-Louis / Liam might about something.
v1 -> v2
- soc_cpu/codec_dai_name() is now inline function
- rename soc_pcm_care_symmetry() to soc_pcm_update_symmetry()
v2 -> v3
- log fix at [6/8]
- Thus, it will be minus users at (2).
+ Thus, users will be a negative number at (2)
Link: https://lore.kernel.org/r/87tupuqqc8.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87tupqpg9x.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (8):
ASoC: soc-pcm: check DAI activity under soc_pcm_apply_symmetry()
ASoC: soc-pcm: add soc_cpu/codec_dai_name() macro
ASoC: soc-pcm: direct copy at snd_soc_set_runtime_hwparams()
ASoC: soc-pcm: add soc_pcm_update_symmetry()
ASoC: soc-pcm: add soc_hw_sanity_check()
ASoC: soc-pcm: fixup dpcm_be_dai_startup() user count
ASoC: soc-pcm: remove unneeded !rtd->dai_link check
ASoC: soc-pcm: share DPCM BE DAI stop operation
include/sound/soc-dpcm.h | 8 +-
sound/soc/soc-compress.c | 2 +-
sound/soc/soc-pcm.c | 243 ++++++++++++++++-----------------------
3 files changed, 105 insertions(+), 148 deletions(-)
--
2.25.1
Pull an operating performance points (OPP) framework fix for 5.12
from Viresh Kumar:
"Fix OPP refcount issue noticed by Beata."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't drop extra references to OPPs accidentally
SM8350-MTP features PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B. PMICs Add the dtsi for these PMICs to MTP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-9-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Igb needs a similar fix as commit 75aab4e10a ("i40e: avoid
premature Rx buffer reuse")
The page recycle code, incorrectly, relied on that a page fragment
could not be freed inside xdp_do_redirect(). This assumption leads to
that page fragments that are used by the stack/XDP redirect can be
reused and overwritten.
To avoid this, store the page count prior invoking xdp_do_redirect().
Longer explanation:
Intel NICs have a recycle mechanism. The main idea is that a page is
split into two parts. One part is owned by the driver, one part might
be owned by someone else, such as the stack.
t0: Page is allocated, and put on the Rx ring
+---------------
used by NIC ->| upper buffer
(rx_buffer) +---------------
| lower buffer
+---------------
page count == USHRT_MAX
rx_buffer->pagecnt_bias == USHRT_MAX
t1: Buffer is received, and passed to the stack (e.g.)
+---------------
| upper buff (skb)
+---------------
used by NIC ->| lower buffer
(rx_buffer) +---------------
page count == USHRT_MAX
rx_buffer->pagecnt_bias == USHRT_MAX - 1
t2: Buffer is received, and redirected
+---------------
| upper buff (skb)
+---------------
used by NIC ->| lower buffer
(rx_buffer) +---------------
Now, prior calling xdp_do_redirect():
page count == USHRT_MAX
rx_buffer->pagecnt_bias == USHRT_MAX - 2
This means that buffer *cannot* be flipped/reused, because the skb is
still using it.
The problem arises when xdp_do_redirect() actually frees the
segment. Then we get:
page count == USHRT_MAX - 1
rx_buffer->pagecnt_bias == USHRT_MAX - 2
From a recycle perspective, the buffer can be flipped and reused,
which means that the skb data area is passed to the Rx HW ring!
To work around this, the page count is stored prior calling
xdp_do_redirect().
Fixes: 9cbc948b5a ("igb: add XDP support")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
IORING_OP_ASYNC_CANCEL tries io-wq cancellation only for current task.
If it fails go over tctx_list and try it out for every single tctx.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
1) The first problem is io_uring_cancel_sqpoll() ->
io_uring_cancel_task_requests() basically doing park(); park(); and so
hanging.
2) Another one is more subtle, when the master task is doing cancellations,
but SQPOLL task submits in-between the end of the cancellation but
before finish() requests taking a ref to the ctx, and so eternally
locking it up.
3) Yet another is a dying SQPOLL task doing io_uring_cancel_sqpoll() and
same io_uring_cancel_sqpoll() from the owner task, they race for
tctx->wait events. And there probably more of them.
Instead do SQPOLL cancellations from within SQPOLL task context via
task_work, see io_sqpoll_cancel_sync(). With that we don't need temporal
park()/unpark() during cancellation, which is ugly, subtle and anyway
doesn't allow to do io_run_task_work() properly.
io_uring_cancel_sqpoll() is called only from SQPOLL task context and
under sqd locking, so all parking is removed from there. And so,
io_sq_thread_[un]park() and io_sq_thread_stop() are not used now by
SQPOLL task, and that spare us from some headache.
Also remove ctx->sqd_list early to avoid 2). And kill tctx->sqpoll,
which is not used anymore.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SQPOLL thread to which we're trying to attach may be going away, it's
not nice but a more serious problem is if io_sq_offload_create() sees
sqd->thread==NULL, and tries to init it with a new thread. There are
tons of ways it can be exploited or fail.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove braces around those `if` and `for` blocks which contain a
single line and therefore fix the Checkpatch warning of the
following type:
"WARNING: braces {} are not necessary for single statement blocks"
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210310104353.14531-1-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>