As specified in IETF RFC 8754, section 4.3.1.2, if the upper layer
header is IPv4 or IPv6, perform IPv6 decapsulation and resubmit the
decapsulated packet to the IPv4 or IPv6 module.
Only IPv6 decapsulation was implemented. This patch adds support for IPv4
decapsulation.
Link: https://tools.ietf.org/html/rfc8754#section-4.3.1.2
Signed-off-by: Julien Massonneau <julien.massonneau@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the new function tw_prot_init (inspired by
req_prot_init) to simplify "proto_register" function.
tw_prot_cleanup will take care of a partially initialized
timewait_sock_ops.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that this is only used in a few places in mr.c give it a sensible
name. It has nothing to do with the cache and can be invoked on any
MR. DMA is stopped and the user cannot touch the MR any further once it
completes.
Link: https://lore.kernel.org/r/20210304120745.1090751-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the SRCU stuff has been removed the entire MR destroy logic can
be made a lot simpler. Currently there are many different ways to destroy a
MR and it makes it really hard to do this task correctly. Route all
destruction through mlx5_ib_dereg_mr() and make it work for all
situations.
Since it turns out all the different MR types do basically the same thing
this removes a lot of knowledge of MR internals from ODP and leaves ODP
just exporting an operation to clean up children.
This fixes a few weird corner cases bugs and firmly uses the correct
ordering of the MR destruction:
- Stop parallel access to the mkey via the ODP xarray
- Stop DMA
- Release the umem
- Clean up ODP children
- Free/Recycle the MR
Link: https://lore.kernel.org/r/20210304120745.1090751-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The struct mlx5_ib_mr can be used for three different things, but only one
at a time:
- In the user MR cache
- As a kernel MR
- As a user MR
Overlay the three things into a single union with the following rules:
- If the mr is found on the cache_ent->head list then it is a cache MR
and umem == NULL. The entire union is zero after the MR is removed from
the cache.
- If umem != NULL or type == IB_MR_TYPE_USER then it is a user MR.
- If umem == NULL then it is a kernel MR
This reduces the size of struct mlx5_ib_mr to 552 bytes from 702.
The only place the three flows overlap in the code is during dereg, so add
a few extra checks along there.
Link: https://lore.kernel.org/r/20210304120745.1090751-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All of the ODP code assumes when it calls mlx5_mr_cache_alloc() the ODP
related fields are zero'd. This is true if the MR was just allocated, but
if the MR is recycled through the cache then the values are never zero'd.
This causes a bug in the odp_stats, they don't reset when the MR is
reallocated, also is_odp_implicit is never 0'd.
So we can use memset on a block of the mlx5_ib_mr reorganize the structure
to put all the data that can be zero'd by the cache at the end.
It is organized as an anonymous struct because the next patch will make
this a union.
Delete the unused smr_info. Don't set the kernel only desc_size on the
user path. No longer any need to zero mr->parent before freeing it, the
memset() will get it now.
Fixes: a3de94e3d6 ("IB/mlx5: Introduce ODP diagnostic counters")
Link: https://lore.kernel.org/r/20210304120745.1090751-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
unrecoverable_exception() is called from interrupt handlers or
after an interrupt handler has failed.
Make it a standard function to avoid doubling the actions
performed on interrupt entry (e.g.: user time accounting).
Fixes: 3a96570ffc ("powerpc: convert interrupt handlers to use wrappers")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ae96c59fa2cb7f24a8929c58cfa2c909cb8ff1f1.1615291471.git.christophe.leroy@csgroup.eu
Huazhong Tan says:
====================
net: hns3: two updates for -next
This series includes two updates for the HNS3 ethernet driver.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For maintainability and compatibility, add support to use pause
capability queried from firmware, and add debugfs support to dump
this capability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For maintainability and compatibility, add support to use FEC
capability queried from firmware.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The HIP09 supports XRC transport service, it greatly saves the number of
QPs required to connect all processes in a large cluster.
Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
flow spec is not small and we do allocate it using kvzalloc
in most places of the driver. fix rest of the places
to use kvzalloc to avoid failure in allocation when
memory is too fragmented.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
fs_get_obj retrieves the container of fs_parent_node just to pass the
same value as &fs_ns->node. Just pass fs_parent_node to
init_root_tree_recursive() to get exactly the same effect.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is no point of calculating reg_c1 or overriding reg_c0 if we are
going to abort the function.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Fix the following coccicheck warnings:
drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.h:50:8-9: WARNING:
return of 0/1 in function 'mlx5_sf_dev_allocated' with return type bool
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5_tc_ct_init() either returns a valid pointer or a NULL, either way
the caller can continue, remove IS_ERR check from callers as it has no
effect.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Some of the stubs for CONFIG_MLX5_CLS_ACT==disabled are missing "static
inline" in their definition which causes the following compilation
warnings:
In file included from drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:41:
>> drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:34:1: warning: no previous prototype for function 'mlx5_esw_indir_table_init' [-Wmissing-prototypes]
mlx5_esw_indir_table_init(void)
^
drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:33:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
struct mlx5_esw_indir_table *
^
static
>> drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:40:1: warning: no previous prototype for function 'mlx5_esw_indir_table_destroy' [-Wmissing-prototypes]
mlx5_esw_indir_table_destroy(struct mlx5_esw_indir_table *indir)
^
drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:39:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void
^
static
>> drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:61:1: warning: no previous prototype for function 'mlx5_esw_indir_table_needed' [-Wmissing-prototypes]
mlx5_esw_indir_table_needed(struct mlx5_eswitch *esw,
^
drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.h:60:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool
^
static
3 warnings generated.
Add "static inline" prefix to signatures of stubs that were missing it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When CONFIG_IPV6 is disabled the header nexthop.h is not included by
fib_notifier.h which causes tc_tun_encap.c to fail to compile:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:5:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.h:7:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h:7:
In file included from drivers/net/ethernet/mellanox/mlx5/core/en_tc.h:40:
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h:78:5: warning: no previous prototype for function 'mlx5e_tc_tun_update_header_ipv6' [-Wmissing-prototypes]
int mlx5e_tc_tun_update_header_ipv6(struct mlx5e_priv *priv,
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h:78:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int mlx5e_tc_tun_update_header_ipv6(struct mlx5e_priv *priv,
^
static
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1510:12: error: implicit declaration of function 'fib_info_nh' [-Werror,-Wimplicit-function-declaration]
fib_dev = fib_info_nh(fen_info->fi, 0)->fib_nh_dev;
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1510:12: note: did you mean 'fib_info_put'?
include/net/ip_fib.h:528:20: note: 'fib_info_put' declared here
static inline void fib_info_put(struct fib_info *fi)
^
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1510:42: error: member reference type 'int' is not a pointer
fib_dev = fib_info_nh(fen_info->fi, 0)->fib_nh_dev;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
include/net/ip_fib.h:113:21: note: expanded from macro 'fib_nh_dev'
#define fib_nh_dev nh_common.nhc_dev
^
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1552:13: error: incomplete definition of type 'struct fib6_entry_notifier_info'
fen_info = container_of(info, struct fib6_entry_notifier_info, info);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/kernel.h:694:51: note: expanded from macro 'container_of'
BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
include/linux/compiler_types.h:256:74: note: expanded from macro '__same_type'
#define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
^
include/linux/build_bug.h:39:58: note: expanded from macro 'BUILD_BUG_ON_MSG'
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
include/linux/compiler_types.h:320:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:308:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:300:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1552:13: error: offsetof of incomplete type 'struct fib6_entry_notifier_info'
fen_info = container_of(info, struct fib6_entry_notifier_info, info);
^ ~~~~~~
include/linux/kernel.h:697:21: note: expanded from macro 'container_of'
((type *)(__mptr - offsetof(type, member))); })
^ ~~~~
include/linux/stddef.h:17:32: note: expanded from macro 'offsetof'
#define offsetof(TYPE, MEMBER) __compiler_offsetof(TYPE, MEMBER)
^ ~~~~
include/linux/compiler_types.h:140:35: note: expanded from macro '__compiler_offsetof'
#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
^ ~
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1552:11: error: assigning to 'struct fib6_entry_notifier_info *' from incompatible type 'void'
fen_info = container_of(info, struct fib6_entry_notifier_info, info);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1553:12: error: implicit declaration of function 'fib6_info_nh_dev' [-Werror,-Wimplicit-function-declaration]
fib_dev = fib6_info_nh_dev(fen_info->rt);
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1553:37: error: incomplete definition of type 'struct fib6_entry_notifier_info'
fib_dev = fib6_info_nh_dev(fen_info->rt);
~~~~~~~~^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1555:14: error: incomplete definition of type 'struct fib6_entry_notifier_info'
fen_info->rt->fib6_dst.plen != 128)
~~~~~~~~^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1562:39: error: incomplete definition of type 'struct fib6_entry_notifier_info'
memcpy(&key.endpoint_ip.v6, &fen_info->rt->fib6_dst.addr,
~~~~~~~~^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1563:24: error: incomplete definition of type 'struct fib6_entry_notifier_info'
sizeof(fen_info->rt->fib6_dst.addr));
~~~~~~~~^
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c:1546:9: note: forward declaration of 'struct fib6_entry_notifier_info'
struct fib6_entry_notifier_info *fen_info;
^
1 warning and 10 errors generated.
Manually include net/nexthop.h in tc_tun_encap.c.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The alternative implementation of this function in a header file
is declared as a global symbol, and gets added to every .c file
that includes it, which leads to a link error:
arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/en_rx.o: in function `mlx5e_tc_tun_update_header_ipv6':
en_rx.c:(.text+0x0): multiple definition of `mlx5e_tc_tun_update_header_ipv6'; drivers/net/ethernet/mellanox/mlx5/core/en_main.o:en_main.c:(.text+0x0): first defined here
Mark it 'static inline' like the other functions here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To avoid false lock dependency warning set the ct_entries_ht lock
class different than the lock class of the ht being used when deleting
last flow from a group and then deleting a group, we get into del_sw_flow_group()
which call rhashtable_destroy on fg->ftes_hash which will take ht->mutex but
it's different than the ht->mutex here.
======================================================
WARNING: possible circular locking dependency detected
5.10.0-rc2+ #8 Tainted: G O
------------------------------------------------------
revalidator23/24009 is trying to acquire lock:
ffff888128d83828 (&node->lock){++++}-{3:3}, at: mlx5_del_flow_rules+0x83/0x7a0 [mlx5_core]
but task is already holding lock:
ffff8881081ef518 (&ht->mutex){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x37/0x720
which lock already depends on the new lock.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
MLX5_INTERFACE_STATE_UP is far from being reliable check for success to
recover, because it can be changed any time and health logic doesn't
have any locks to protect from it.
The locks are not needed here because health recover is good to have,
but not must to success, so rely on the returned value from the
mlx5_recover_device() as a marker for success/failure.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The check of MLX5_INTERFACE_STATE_UP is completely useless, because
the FW tracer cleanup is called on every change of the interface
and it ensures that notifier is disabled together with canceling
all the pending works.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The FW tracer check is called twice, so delete one of them.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The mix between probe/unprobe and reload flows causes to have an extra
mutex lock intf_state_mutex that generates LOCKDEP warning between it
and devlink_mutex. As a preparation for the future removal, separate
those flows.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The interface state is constant at this stage and checked
before calling to the register/unregister reserved GIDs.
There is no need to double check it.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Users of mlx5_eswitch_get_vport() are required to check return value
prior to passing mlx5_vport further. Fix all the places to do not skip
that check.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix the following coccicheck warnings:
./drivers/net/netdevsim/fib.c:874:5-8: Unneeded variable: "err". Return
"0" on line 889.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
kunit_tool maintains a list of config options which are broken under
UML, which we exclude from an otherwise 'make ARCH=um allyesconfig'
build used to run all tests with the --alltests option.
Something in UML allyesconfig is causing segfaults when page poisining
is enabled (and is poisoning with a non-zero value). Previously, this
didn't occur, as allyesconfig enabled the CONFIG_PAGE_POISONING_ZERO
option, which worked around the problem by zeroing memory. This option
has since been removed, and memory is now poisoned with 0xAA, which
triggers segfaults in many different codepaths, preventing UML from
booting.
Note that we have to disable both CONFIG_PAGE_POISONING and
CONFIG_DEBUG_PAGEALLOC, as the latter will 'select' the former on
architectures (such as UML) which don't implement __kernel_map_pages().
Ideally, we'd fix this properly by tracking down the real root cause,
but since this is breaking KUnit's --alltests feature, it's worth
disabling there in the meantime so the kernel can boot to the point
where tests can actually run.
Fixes: f289041ed4 ("mm, page_poison: remove CONFIG_PAGE_POISONING_ZERO")
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The first argument to namedtuple() should match the name of the type,
which wasn't the case for KconfigEntryBase.
Fixing this is enough to make mypy show no python typing errors again.
Fixes 97752c39bd ("kunit: kunit_tool: Allow .kunitconfig to disable config items")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are harmless warnings when compile testing the kernel with
CONFIG_TRIM_UNUSED_KSYMS:
drivers/pci/controller/dwc/pcie-al.o: no symbols
drivers/pci/controller/pci-thunder-ecam.o: no symbols
drivers/pci/controller/pci-thunder-pem.o: no symbols
The problem here is that the host drivers get built even when the
configuration symbols are all disabled, as they pretend to not be drivers
but are silently enabled because of the promise that ACPI-based systems
need no drivers.
Add back the normal symbols to have these drivers built, and change the
logic to otherwise only build them when both CONFIG_PCI_QUIRKS and
CONFIG_ACPI are enabled.
As a side-effect, this enables compile-testing the drivers on other
architectures, which in turn needs the acpi_get_rc_resources() function to
be defined.
Link: https://lore.kernel.org/r/20210308152501.2135937-3-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Robert Richter <rric@kernel.org>
Compile-testing these drivers is currently broken. Enabling it causes a
couple of build failures though:
drivers/pci/controller/pci-thunder-ecam.c:119:30: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
drivers/pci/controller/pci-thunder-pem.c:54:2: error: implicit declaration of function 'writeq' [-Werror,-Wimplicit-function-declaration]
drivers/pci/controller/pci-thunder-pem.c:392:8: error: implicit declaration of function 'acpi_get_rc_resources' [-Werror,-Wimplicit-function-declaration]
Fix them with the obvious one-line changes.
Link: https://lore.kernel.org/r/20210308152501.2135937-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Robert Richter <rric@kernel.org>
Compile-testing this driver without ECAM support results in a link failure:
ld.lld: error: undefined symbol: pci_ecam_map_bus
>>> referenced by pcie-al.c
>>> pci/controller/dwc/pcie-al.o:(al_pcie_map_bus) in archive drivers/built-in.a
Select CONFIG_ECAM like the other drivers do.
Link: https://lore.kernel.org/r/20210308152501.2135937-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
phydev::dev_flags contains a bitmask of configuration bits requested by
the consumer of a PHY device (Ethernet MAC or switch) towards the PHY
driver. Since these flags are often used for requesting LED or other
type of configuration being able to quickly audit them without
instrumenting the kernel is useful.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To get access to the big endian byte order parsing helpers
drivers need to include <asm/unaligned.h> and nothing else.
Cc: Gene Chen <gene_chen@richtek.com>
Suggested-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210215153447.48457-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add some helpers to lock and unlock the device. As this is such a simple
change, we update all the users that were using the lock already in this
patch.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210218114039.216091-5-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
`adi,scaled-output-hz` is no longer used by the driver.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210218114039.216091-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With this patch, we don't force users to define the IMU scaled internal
sampling rate once in the devicetree. Now it's dynamically calculated
at runtime depending on the desired output rate given by users.
Calculating the sync_scale dynamically gives us better chances of
achieving a perfect/integer value for DEC_RATE (thus giving more
flexibility). The math is:
1. lcm of the input clock and the desired output rate.
2. get the highest multiple of the previous result lower than the adis
max rate.
3. The last result becomes the IMU sample rate. Use that to calculate
SYNC_SCALE and DEC_RATE (to get the user output rate).
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210218114039.216091-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When using PPS mode, the input clock needs to be scaled so that we have
an IMU sample rate between (optimally) 4000 and 4250. After this, we can
use the decimation filter to lower the sampling rate in order to get what
the user wants. Optimally, the user sample rate is a multiple of both the
IMU sample rate and the input clock. Hence, calculating the sync_scale
dynamically gives us better chances of achieving a perfect/integer value
for DEC_RATE. The math here is:
1. lcm of the input clock and the desired output rate.
2. get the highest multiple of the previous result lower than the adis
max rate.
3. The last result becomes the IMU sample rate. Use that to calculate
SYNC_SCALE and DEC_RATE (to get the user output rate).
Fixes: 326e235755 ("iio: imu: adis16480: Add support for external clock")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210218114039.216091-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The channels are of type iio_chan_spec, not axi_adc_chan_spec. They were in
some earlier version, but forgot to rename in the doc-string.
Fixes: ef04070692 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210219090134.48057-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since the new change to the IIO buffer infrastructure, the buffer/ and
scan_elements/ directories have been merged into bufferY/ to have some
attributes available per-buffer.
This change updates the ABI docs to reflect this change.
The hwfifo attributes are not updated, as for now these should be used
via the legacy buffer/ directory until they are moved into core.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210217083438.37865-2-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD5673R/AD5677R are low power, 16-channel, 12-/16-bit buffered voltage
output digital-to-analog converters (DACs). They include a 2.5 V internal
reference (enabled by default).
These devices are very similar to AD5674R/AD5679R, except that they
have an i2c interface.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210217074102.23148-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some 2-in-1 laptops / convertibles with 360° (yoga-style) hinges,
have 2 accelerometers, 1 in their base and 1 in their display.
In many cases the kernel can detect the location of each accelerometer
based on e.g. information from the ACPI tables.
It is important for userspace to know the location of the 2 accelerometers.
Rather then adding a new sysfs-attribute for this we can relay this
information to userspace by using standardized label strings for this.
This mirrors how this is done for proximity sensors.
This commit documents 2 new standardized label strings for this purpose:
"accel-base"
"accel-display"
Note the "base" and "display" suffixes were chosen to match the values
used for the systemd/udev hwdb.d/60-sensor.hwdb file's ACCEL_LOCATION
property.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mark Pearson <mpearson@lenovo.com>
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215191003.698888-2-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add an entry to Documentation/ABI/testing/sysfs-bus-iio for
the new device label sysfs-attribute support.
And document the standardized labels which may be used with proximity
sensors to hint userspace about the intended use of the sensor.
Using labels to differentiate between the multiple proximity sensors
which a modern laptop/tablet may have was discussed in this thread:
https://lore.kernel.org/linux-iio/9f9b0ff6-3bf1-63c4-eb36-901cecd7c4d9@redhat.com/
As mentioned there the "proximity-wifi*" labels are already being used
in this manner on some chromebooks, see e.g.:
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
And the "proximity-palmrest" and "proximity-lap" labels are intended
to be used with the lap and palmrest sensors found in recent Lenovo
ThinkPad models.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mark Pearson <mpearson@lenovo.com>
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215191003.698888-1-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some hid sensors may use relative sensitivity such as als sensor.
This patch adds relative sensitivity checking for all hid sensors.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20210207070048.23935-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Before, when reading/writing the hysteresis of als, incli-3d, press, and
rotation sensor, we will get invalid argument error.
This patch add more sensitivity data fields for these sensors, so that
these sensors can get sensitivity index and return correct hysteresis
value.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Link: https://lore.kernel.org/r/20210201054921.18214-3-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No functional change has been made with this patch. The main intent here
is to reduce code repetition of getting sensitivity attribute.
In the current implementation, sensor_hub_input_get_attribute_info() is
called from multiple drivers to get attribute info for sensitivity
field. Moving this to common place will avoid code repetition.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210201054921.18214-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>