Commit graph

1,014,740 commits

Author SHA1 Message Date
Ard Biesheuvel
95731b8ee6 ARM: 9059/1: cache-v7: get rid of mini-stack
Now that we have reduced the number of registers that we need to
preserve when calling v7_invalidate_l1 from the boot code, we can use
scratch registers to preserve the remaining ones, and get rid of the
mini stack entirely. This works around any issues regarding cache
behavior in relation to the uncached accesses to this memory, which is
hard to get right in the general case (i.e., both bare metal and under
virtualization)

While at it, switch v7_invalidate_l1 to using ip as a scratch register
instead of r4. This makes the function AAPCS compliant, and removes the
need to stash r4 in ip across the call.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-09 10:25:18 +00:00
Ard Biesheuvel
f9e7a99fb6 ARM: 9058/1: cache-v7: refactor v7_invalidate_l1 to avoid clobbering r5/r6
The cache invalidation code in v7_invalidate_l1 can be tweaked to
re-read the associativity from CCSIDR, and keep the way identifier
component in a single register that is assigned in the outer loop. This
way, we need 2 registers less.

Given that the number of sets is typically much larger than the
associativity, rearrange the code so that the outer loop has the fewer
number of iterations, ensuring that the re-read of CCSIDR only occurs a
handful of times in practice.

Fix the whitespace while at it, and update the comment to indicate that
this code is no longer a clone of anything else.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-09 10:25:18 +00:00
Ard Biesheuvel
c0e50736e8 ARM: 9057/1: cache-v7: add missing ISB after cache level selection
A write to CSSELR needs to complete before its results can be observed
via CCSIDR. So add a ISB to ensure that this is the case.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-09 10:25:17 +00:00
Ard Biesheuvel
c4e792d1ac ARM: 9056/1: decompressor: fix BSS size calculation for LLVM ld.lld
The LLVM ld.lld linker uses a different symbol type for __bss_start,
resulting in the calculation of KBSS_SZ to be thrown off. Up until now,
this has gone unnoticed as it only affects the appended DTB case, but
pending changes for ARM in the way the decompressed kernel is cleaned
from the caches has uncovered this problem.

On a ld.lld build:

  $ nm vmlinux |grep bss_
  c1c22034 D __bss_start
  c1c86e98 B __bss_stop

resulting in

  $ readelf -s arch/arm/boot/compressed/vmlinux | grep bss_size
  433: c1c86e98     0 NOTYPE  GLOBAL DEFAULT  ABS _kernel_bss_size

which is obviously incorrect, and may cause the cache clean to access
unmapped memory, or cause the size calculation to wrap, resulting in no
cache clean to be performed at all.

Fix this by updating the sed regex to take D type symbols into account.

Link: https://lore.kernel.org/linux-arm-kernel/6c65bcef-d4e7-25fa-43cf-2c435bb61bb9@collabora.com/
Link: https://lore.kernel.org/linux-arm-kernel/20210205085220.31232-1-ardb@kernel.org/

Cc: <stable@vger.kernel.org> # v4.19+
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-09 10:25:17 +00:00
Thomas Bogendoerfer
bd67b711bf MIPS: kernel: Reserve exception base early to prevent corruption
BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb396454 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.

Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].

The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.

To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.

Huge thanks to Serge for analysing and proposing a solution to this
issue.

Fixes: 2dcb396454 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-09 11:22:59 +01:00
Claudio Imbrenda
f85f1baaa1 KVM: s390: split kvm_s390_logical_to_effective
Split kvm_s390_logical_to_effective to a generic function called
_kvm_s390_logical_to_effective. The new function takes a PSW and an address
and returns the address with the appropriate bits masked off. The old
function now calls the new function with the appropriate PSW from the vCPU.

This is needed to avoid code duplication for vSIE.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # for VSIE: correctly handle MVPG when in VSIE
Link: https://lore.kernel.org/r/20210302174443.514363-2-imbrenda@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-03-09 10:16:56 +01:00
Pierre Morel
87e28a15c4 KVM: s390: diag9c (directed yield) forwarding
When we intercept a DIAG_9C from the guest we verify that the
target real CPU associated with the virtual CPU designated by
the guest is running and if not we forward the DIAG_9C to the
target real CPU.

To avoid a diag9c storm we allow a maximal rate of diag9c forwarding.

The rate is calculated as a count per second defined as a new
parameter of the s390 kvm module: diag9c_forwarding_hz .

The default value of 0 is to not forward diag9c.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/1613997661-22525-2-git-send-email-pmorel@linux.ibm.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-03-09 10:16:26 +01:00
Bhaskar Chowdhury
38860756a1 KVM: s390: Fix comment spelling in kvm_s390_vcpu_start()
s/oustanding/outstanding/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210213153227.1640682-1-unixbhaskar@gmail.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-03-09 10:06:48 +01:00
Frank Li
f06391c45e mmc: cqhci: Fix random crash when remove mmc module/card
[ 6684.493350] Unable to handle kernel paging request at virtual address ffff800011c5b0f0
[ 6684.498531] mmc0: card 0001 removed
[ 6684.501556] Mem abort info:
[ 6684.509681]   ESR = 0x96000047
[ 6684.512786]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 6684.518394]   SET = 0, FnV = 0
[ 6684.521707]   EA = 0, S1PTW = 0
[ 6684.524998] Data abort info:
[ 6684.528236]   ISV = 0, ISS = 0x00000047
[ 6684.532986]   CM = 0, WnR = 1
[ 6684.536129] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081b22000
[ 6684.543923] [ffff800011c5b0f0] pgd=00000000bffff003, p4d=00000000bffff003, pud=00000000bfffe003, pmd=00000000900e1003, pte=0000000000000000
[ 6684.557915] Internal error: Oops: 96000047 [#1] PREEMPT SMP
[ 6684.564240] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine rng_core authenc libdes crct10dif_ce flexcan can_dev caam error [last unloaded: mmc_core]
[ 6684.587281] CPU: 0 PID: 79138 Comm: kworker/0:3H Not tainted 5.10.9-01410-g3ba33182767b-dirty #10
[ 6684.596160] Hardware name: Freescale i.MX8DXL EVK (DT)
[ 6684.601320] Workqueue: kblockd blk_mq_run_work_fn

[ 6684.606094] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[ 6684.612286] pc : cqhci_request+0x148/0x4e8 [cqhci]
^GMessage from syslogd@  at Thu Jan  1 01:51:24 1970 ...[ 6684.617085] lr : cqhci_request+0x314/0x4e8 [cqhci]
[ 6684.626734] sp : ffff80001243b9f0
[ 6684.630049] x29: ffff80001243b9f0 x28: ffff00002c3dd000
[ 6684.635367] x27: 0000000000000001 x26: 0000000000000001
[ 6684.640690] x25: ffff00002c451000 x24: 000000000000000f
[ 6684.646007] x23: ffff000017e71c80 x22: ffff00002c451000
[ 6684.651326] x21: ffff00002c0f3550 x20: ffff00002c0f3550
[ 6684.656651] x19: ffff000017d46880 x18: ffff00002cea1500
[ 6684.661977] x17: 0000000000000000 x16: 0000000000000000
[ 6684.667294] x15: 000001ee628e3ed1 x14: 0000000000000278
[ 6684.672610] x13: 0000000000000001 x12: 0000000000000001
[ 6684.677927] x11: 0000000000000000 x10: 0000000000000000
[ 6684.683243] x9 : 000000000000002b x8 : 0000000000001000
[ 6684.688560] x7 : 0000000000000010 x6 : ffff00002c0f3678
[ 6684.693886] x5 : 000000000000000f x4 : ffff800011c5b000
[ 6684.699211] x3 : 000000000002d988 x2 : 0000000000000008
[ 6684.704537] x1 : 00000000000000f0 x0 : 0002d9880008102f
[ 6684.709854] Call trace:
[ 6684.712313]  cqhci_request+0x148/0x4e8 [cqhci]
[ 6684.716803]  mmc_cqe_start_req+0x58/0x68 [mmc_core]
[ 6684.721698]  mmc_blk_mq_issue_rq+0x460/0x810 [mmc_block]
[ 6684.727018]  mmc_mq_queue_rq+0x118/0x2b0 [mmc_block]

The problem occurs when cqhci_request() get called after cqhci_disable() as
it leads to access of allocated memory that has already been freed. Let's
fix the problem by calling cqhci_disable() a bit later in the remove path.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Diagnosed-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20210303174248.542175-1-Frank.Li@nxp.com
Fixes: f690f4409d ("mmc: mmc: Enable CQE's")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-09 10:00:52 +01:00
Adrian Hunter
66fbacccba mmc: core: Fix partition switch time for eMMC
Avoid the following warning by always defining partition switch time:

 [    3.209874] mmc1: unspecified timeout for CMD6 - use generic
 [    3.222780] ------------[ cut here ]------------
 [    3.233363] WARNING: CPU: 1 PID: 111 at drivers/mmc/core/mmc_ops.c:575 __mmc_switch+0x200/0x204

Reported-by: Paul Fertser <fercerpav@gmail.com>
Fixes: 1c447116d0 ("mmc: mmc: Fix partition switch timeout for some eMMCs")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/168bbfd6-0c5b-5ace-ab41-402e7937c46e@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-09 10:00:52 +01:00
Yann Gautier
774514bf97 mmc: mmci: Add MMC_CAP_NEED_RSP_BUSY for the stm32 variants
An issue has been observed on STM32MP157C-EV1 board, with an erase command
with secure erase argument, ending up waiting for ~4 hours before timeout.

The requested busy timeout from the mmc core ends up with 14784000ms (~4
hours), but the supported host->max_busy_timeout is 86767ms, which leads to
that the core switch to use an R1 response in favor of the R1B and polls
for busy with the host->card_busy() ops. In this case the polling doesn't
work as expected, as we never detects that the card stops signaling busy,
which leads to the following message:

 mmc1: Card stuck being busy! __mmc_poll_for_busy

The problem boils done to that the stm32 variants can't use R1 responses in
favor of R1B responses, as it leads to an internal state machine in the
controller to get stuck. To continue to process requests, it would need to
be reset.

To fix this problem, let's set MMC_CAP_NEED_RSP_BUSY for the stm32 variant,
which prevent the mmc core from switching to R1 responses. Additionally,
let's cap the cmd->busy_timeout to the host->max_busy_timeout, thus rely on
86767ms to be sufficient (~66 seconds was need for this test case).

Fixes: 94fe2580a2 ("mmc: core: Enable erase/discard/trim support for all mmc hosts")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20210225145454.12780-1-yann.gautier@foss.st.com
Cc: stable@vger.kernel.org
[Ulf: Simplified the code and extended the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-09 10:00:52 +01:00
Sami Tolvanen
dbaee836d6 KVM: arm64: Don't use cbz/adr with external symbols
allmodconfig + CONFIG_LTO_CLANG_THIN=y fails to build due to following
linker errors:

  ld.lld: error: irqbypass.c:(function __guest_enter: .text+0x21CC):
  relocation R_AARCH64_CONDBR19 out of range: 2031220 is not in
  [-1048576, 1048575]; references hyp_panic
  >>> defined in vmlinux.o

  ld.lld: error: irqbypass.c:(function __guest_enter: .text+0x21E0):
  relocation R_AARCH64_ADR_PREL_LO21 out of range: 2031200 is not in
  [-1048576, 1048575]; references hyp_panic
  >>> defined in vmlinux.o

This is because with LTO, the compiler ends up placing hyp_panic()
more than 1MB away from __guest_enter(). Use an unconditional branch
and adr_l instead to fix the issue.

Link: https://github.com/ClangBuiltLinux/linux/issues/1317
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210305202124.3768527-1-samitolvanen@google.com
2021-03-09 08:48:24 +00:00
Paul Cercueil
5fbecd2389 irqchip/ingenic: Add support for the JZ4760
Add support for the interrupt controller found in the JZ4760 SoC, which
works exactly like the one in the JZ4770.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210307172014.73481-2-paul@crapouillou.net
2021-03-09 08:45:17 +00:00
Paul Cercueil
673433e7c2 dt-bindings/irq: Add compatible string for the JZ4760B
Add the ingenic,jz4760b-intc compatible string with a fallback to the
ingenic,jz4760-intc compatible string.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210307172014.73481-1-paul@crapouillou.net
2021-03-09 08:45:11 +00:00
Pavel Skripkin
cfdc67acc7 USB: serial: io_edgeport: fix memory leak in edge_startup
sysbot found memory leak in edge_startup().
The problem was that when an error was received from the usb_submit_urb(),
nothing was cleaned up.

Reported-by: syzbot+59f777bdcbdd7eea5305@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Fixes: 6e8cf7751f ("USB: add EPIC support to the io_edgeport driver")
Cc: stable@vger.kernel.org	# 2.6.21: c5c0c55598
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-09 09:05:37 +01:00
Niv Sardi
5563b3b642 USB: serial: ch341: add new Product ID
Add PID for CH340 that's found on cheap programmers.

The driver works flawlessly as soon as the new PID (0x9986) is added to it.
These look like ANU232MI but ship with a ch341 inside. They have no special
identifiers (mine only has the string "DB9D20130716" printed on the PCB and
nothing identifiable on the packaging. The merchant i bought it from
doesn't sell these anymore).

the lsusb -v output is:
Bus 001 Device 009: ID 9986:7523
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x9986
  idProduct          0x7523
  bcdDevice            2.54
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0027
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               96mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      2
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               1

Signed-off-by: Niv Sardi <xaiki@evilgiggle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-09 09:05:36 +01:00
Johan Hovold
f164f5d8a7 USB: serial: xr: fix NULL-deref on disconnect
Claiming the sibling control interface is a bit more involved and
specifically requires adding support to USB-serial core for managing
either interface being unbound first, something which could otherwise
lead to a NULL-pointer dereference.

Similarly, additional infrastructure is also needed to handle suspend
properly.

Since the driver currently isn't actually using the control interface,
we can defer this for now by simply not claiming the control interface.

Fixes: c2d405aa86 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-09 09:05:36 +01:00
Sebastian Reichel
42213a0190 USB: serial: cp210x: add some more GE USB IDs
GE CS1000 has some more custom USB IDs for CP2102N; add them
to the driver to have working auto-probing.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-09 09:05:36 +01:00
Karan Singhal
ca667a3320 USB: serial: cp210x: add ID for Acuity Brands nLight Air Adapter
IDs of nLight Air Adapter, Acuity Brands, Inc.:
vid: 10c4
pid: 88d8

Signed-off-by: Karan Singhal <karan.singhal@acuitybrands.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-09 09:05:36 +01:00
Pavel Skripkin
c5aa956eae ALSA: usb-audio: fix use after free in usb_audio_disconnect
The problem was in wrong "if" placement. chip->quirk_type is freed
in snd_card_free_when_closed(), but inside if statement it's accesed.

Fixes: 9799110825 ("ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/16da19126ff461e5e64a9aec648cce28fb8ed73e.1615242183.git.paskripkin@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-09 07:40:46 +01:00
Daniel Lezcano
1224451bb6 PM / devfreq: Register devfreq as a cooling device on demand
Currently the default behavior is to manually having the devfreq
backend to register themselves as a devfreq cooling device.

Instead of adding the code in the drivers for the thermal cooling
device registering, let's provide a flag in the devfreq's profile to
tell the common devfreq code to register the newly created devfreq as
a cooling device.

Suggested-by: Chanwoo Choi <cwchoi00@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-09 15:40:16 +09:00
Pavel Skripkin
30dea07180 ALSA: usb-audio: fix NULL ptr dereference in usb_audio_probe
syzbot reported null pointer dereference in usb_audio_probe.
The problem was in case, when quirk == NULL. It's not an
error condition, so quirk must be checked before dereferencing.

Call Trace:
 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
 really_probe+0x291/0xe60 drivers/base/dd.c:554
 driver_probe_device+0x26b/0x3d0 drivers/base/dd.c:740
 __device_attach_driver+0x1d1/0x290 drivers/base/dd.c:846
 bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:431
 __device_attach+0x228/0x4a0 drivers/base/dd.c:914
 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:491
 device_add+0xbdb/0x1db0 drivers/base/core.c:3242
 usb_set_configuration+0x113f/0x1910 drivers/usb/core/message.c:2164
 usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238
 usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293
 really_probe+0x291/0xe60 drivers/base/dd.c:554
 driver_probe_device+0x26b/0x3d0 drivers/base/dd.c:740
 __device_attach_driver+0x1d1/0x290 drivers/base/dd.c:846
 bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:431
 __device_attach+0x228/0x4a0 drivers/base/dd.c:914
 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:491
 device_add+0xbdb/0x1db0 drivers/base/core.c:3242
 usb_new_device.cold+0x721/0x1058 drivers/usb/core/hub.c:2555
 hub_port_connect drivers/usb/core/hub.c:5223 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5363 [inline]
 port_event drivers/usb/core/hub.c:5509 [inline]
 hub_event+0x2357/0x4320 drivers/usb/core/hub.c:5591
 process_one_work+0x98d/0x1600 kernel/workqueue.c:2275
 worker_thread+0x64c/0x1120 kernel/workqueue.c:2421
 kthread+0x3b1/0x4a0 kernel/kthread.c:292
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

Reported-by: syzbot+719da9b149a931f5143f@syzkaller.appspotmail.com
Fixes: 9799110825 ("ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/f1ebad6e721412843bd1b12584444c0a63c6b2fb.1615242183.git.paskripkin@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-09 07:40:09 +01:00
Simeon Simeonoff
f15c5c11ab ALSA: hda/ca0132: Add Sound BlasterX AE-5 Plus support
The new AE-5 Plus model has a different Subsystem ID compared to the
non-plus model. Adding the new id to the list of quirks.

Signed-off-by: Simeon Simeonoff <sim.simeonoff@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/998cafbe10b648f724ee33570553f2d780a38963.camel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-09 07:34:37 +01:00
Linus Torvalds
987a08741d Merge git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc
Pull sparc updates from David Miller:
 "Just some more random bits from Al, including a conversion over to
  generic extables"

* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: take ->thread.flags out
  sparc32: get rid of fake_swapper_regs
  sparc64: get rid of fake_swapper_regs
  sparc32: switch to generic extables
  sparc32: switch copy_user.S away from range exception table entries
  sparc32: get rid of range exception table entries in checksum_32.S
  sparc32: switch __bzero() away from range exception table entries
  sparc32: kill lookup_fault()
  sparc32: don't bother with lookup_fault() in __bzero()
2021-03-08 22:01:58 -08:00
Max Filippov
ab5eb33641 xtensa: move coprocessor_flush to the .text section
coprocessor_flush is not a part of fast exception handlers, but it uses
parts of fast coprocessor handling code that's why it's in the same
source file. It uses call0 opcode to invoke those parts so there are no
limitations on their relative location, but the rest of the code calls
coprocessor_flush with call8 and that doesn't work when vectors are
placed in a different gigabyte-aligned area than the rest of the kernel.

Move coprocessor_flush from the .exception.text section to the .text so
that it's reachable from the rest of the kernel with call8.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-03-08 20:15:09 -08:00
Paulo Alcantara
04ad69c342 cifs: do not send close in compound create+close requests
In case of interrupted syscalls, prevent sending CLOSE commands for
compound CREATE+CLOSE requests by introducing an
CIFS_CP_CREATE_CLOSE_OP flag to indicate lower layers that it should
not send a CLOSE command to the MIDs corresponding the compound
CREATE+CLOSE request.

A simple reproducer:

    #!/bin/bash

    mount //server/share /mnt -o username=foo,password=***
    tc qdisc add dev eth0 root netem delay 450ms
    stat -f /mnt &>/dev/null & pid=$!
    sleep 0.01
    kill $pid
    tc qdisc del dev eth0 root
    umount /mnt

Before patch:

    ...
    6 0.256893470 192.168.122.2 → 192.168.122.15 SMB2 402 Create Request File: ;GetInfo Request FS_INFO/FileFsFullSizeInformation;Close Request
    7 0.257144491 192.168.122.15 → 192.168.122.2 SMB2 498 Create Response File: ;GetInfo Response;Close Response
    9 0.260798209 192.168.122.2 → 192.168.122.15 SMB2 146 Close Request File:
   10 0.260841089 192.168.122.15 → 192.168.122.2 SMB2 130 Close Response, Error: STATUS_FILE_CLOSED

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-03-08 21:23:22 -06:00
Paulo Alcantara
14302ee330 cifs: return proper error code in statfs(2)
In cifs_statfs(), if server->ops->queryfs is not NULL, then we should
use its return value rather than always returning 0.  Instead, use rc
variable as it is properly set to 0 in case there is no
server->ops->queryfs.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-03-08 21:23:11 -06:00
Paulo Alcantara
e3d100eae4 cifs: change noisy error message to FYI
A customer has reported that their dmesg were being flooded by

  CIFS: VFS: \\server Cancelling wait for mid xxx cmd: a
  CIFS: VFS: \\server Cancelling wait for mid yyy cmd: b
  CIFS: VFS: \\server Cancelling wait for mid zzz cmd: c

because some processes that were performing statfs(2) on the share had
been interrupted due to their automount setup when certain users
logged in and out.

Change it to FYI as they should be mostly informative rather than
error messages.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-03-08 21:22:52 -06:00
Paulo Alcantara
bf1bc694b6 cifs: print MIDs in decimal notation
The MIDs are mostly printed as decimal, so let's make it consistent.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-03-08 21:22:31 -06:00
Xiong Zhenwu
431c3be16b selinux: fix misspellings using codespell tool
A typo is f out by codespell tool in 422th line of security.h:

$ codespell ./security/selinux/include/
./security.h:422: thie  ==> the, this

Fix a typo found by codespell.

Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-08 19:46:33 -05:00
Xiong Zhenwu
63ddf1baa0 selinux: fix misspellings using codespell tool
A typo is found out by codespell tool in 16th line of hashtab.c

$ codespell ./security/selinux/ss/
./hashtab.c:16: rouding  ==> rounding

Fix a typo found by codespell.

Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-08 19:44:30 -05:00
Lakshmi Ramasubramanian
2554a48f44 selinux: measure state and policy capabilities
SELinux stores the configuration state and the policy capabilities
in kernel memory.  Changes to this data at runtime would have an impact
on the security guarantees provided by SELinux.  Measuring this data
through IMA subsystem provides a tamper-resistant way for
an attestation service to remotely validate it at runtime.

Measure the configuration state and policy capabilities by calling
the IMA hook ima_measure_critical_data().

To enable SELinux data measurement, the following steps are required:

 1, Add "ima_policy=critical_data" to the kernel command line arguments
    to enable measuring SELinux data at boot time.
    For example,
      BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data

 2, Add the following rule to /etc/ima/ima-policy
       measure func=CRITICAL_DATA label=selinux

Sample measurement of SELinux state and policy capabilities:

10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b

Execute the following command to extract the measured data
from the IMA's runtime measurements list:

  grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p

The output should be a list of key-value pairs. For example,
 initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0;

To verify the measurement is consistent with the current SELinux state
reported on the system, compare the integer values in the following
files with those set in the IMA measurement (using the following commands):

 - cat /sys/fs/selinux/enforce
 - cat /sys/fs/selinux/checkreqprot
 - cat /sys/fs/selinux/policy_capabilities/[capability_file]

Note that the actual verification would be against an expected state
and done on a separate system (likely an attestation server) requiring
"initialized=1;enforcing=1;checkreqprot=0;"
for a secure state and then whatever policy capabilities are actually
set in the expected policy (which can be extracted from the policy
itself via seinfo, for example).

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-08 19:39:07 -05:00
Vivek Goyal
7fa2e79a6b selinux: Allow context mounts for unpriviliged overlayfs
Now overlayfs allow unpriviliged mounts. That is root inside a non-init
user namespace can mount overlayfs. This is being added in 5.11 kernel.

Giuseppe tried to mount overlayfs with option "context" and it failed
with error -EACCESS.

$ su test
$ unshare -rm
$ mkdir -p lower upper work merged
$ mount -t overlay -o lowerdir=lower,workdir=work,upperdir=upper,userxattr,context='system_u:object_r:container_file_t:s0' none merged

This fails with -EACCESS. It works if option "-o context" is not specified.

Little debugging showed that selinux_set_mnt_opts() returns -EACCESS.

So this patch adds "overlay" to the list, where it is fine to specific
context from non init_user_ns.

Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
[PM: trimmed the changelog from the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-08 19:34:38 -05:00
Bhaskar Chowdhury
a5907065ac docs: livepatch: Fix a typo and remove the unnecessary gaps in a sentence
s/varibles/variables/

...and remove leading spaces from a sentence.

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210305100923.3731-1-unixbhaskar@gmail.com
[jc: performed suggested prepositional tweak]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:25:16 -07:00
Peter Xu
1f7faca2f9 docs: filesystem: Update smaps vm flag list to latest
We've missed a few documentation when adding new VM_* flags.  Add the missing
pieces so they'll be in sync now.

Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20210302000646.432358-1-peterx@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:20:53 -07:00
Mauro Carvalho Chehab
3b4c963243 docs: conf.py: adjust the LaTeX document output
Changeset f546ff0c0c ("Move our minimum Sphinx version to 1.7")
cleaned up some compatibility issues with previous Sphinx
versions, but it also dropped the PDF margin sets.

Without that, the media documentation won't build fine, as
the margins are too wide to display texts with monospaced
fonts.

While here, align the  "latex_elements = {" values, and add
a few other sphinxsetup configs in order to allow Sphinx to
wrap long lines on literal blocks.

Fixes: f546ff0c0c ("Move our minimum Sphinx version to 1.7")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

 Documentation/conf.py | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)
Link: https://lore.kernel.org/r/911fbac185dd09c7df715cf4153361b81f04b7ad.1614787053.git.mchehab+huawei@kernel.org

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:20:03 -07:00
Barry Song
00b072c011 Documentation/admin-guide: kernel-parameters: correct the architectures for numa_balancing
X86 isn't the only architecture supporting NUMA_BALANCING. ARM64, PPC,
S390 and RISCV also support it:

arch$ git grep NUMA_BALANCING
arm64/Kconfig:  select ARCH_SUPPORTS_NUMA_BALANCING
arm64/configs/defconfig:CONFIG_NUMA_BALANCING=y
arm64/include/asm/pgtable.h:#ifdef CONFIG_NUMA_BALANCING
powerpc/configs/powernv_defconfig:CONFIG_NUMA_BALANCING=y
powerpc/configs/ppc64_defconfig:CONFIG_NUMA_BALANCING=y
powerpc/configs/pseries_defconfig:CONFIG_NUMA_BALANCING=y
powerpc/include/asm/book3s/64/pgtable.h:#ifdef CONFIG_NUMA_BALANCING
powerpc/include/asm/book3s/64/pgtable.h:#ifdef CONFIG_NUMA_BALANCING
powerpc/include/asm/book3s/64/pgtable.h:#endif /* CONFIG_NUMA_BALANCING */
powerpc/include/asm/book3s/64/pgtable.h:#ifdef CONFIG_NUMA_BALANCING
powerpc/include/asm/book3s/64/pgtable.h:#endif /* CONFIG_NUMA_BALANCING */
powerpc/include/asm/nohash/pgtable.h:#ifdef CONFIG_NUMA_BALANCING
powerpc/include/asm/nohash/pgtable.h:#endif /* CONFIG_NUMA_BALANCING */
powerpc/platforms/Kconfig.cputype:      select ARCH_SUPPORTS_NUMA_BALANCING
riscv/Kconfig:  select ARCH_SUPPORTS_NUMA_BALANCING
riscv/include/asm/pgtable.h:#ifdef CONFIG_NUMA_BALANCING
s390/Kconfig:   select ARCH_SUPPORTS_NUMA_BALANCING
s390/configs/debug_defconfig:CONFIG_NUMA_BALANCING=y
s390/configs/defconfig:CONFIG_NUMA_BALANCING=y
s390/include/asm/pgtable.h:#ifdef CONFIG_NUMA_BALANCING
x86/Kconfig:    select ARCH_SUPPORTS_NUMA_BALANCING     if X86_64
x86/include/asm/pgtable.h:#ifdef CONFIG_NUMA_BALANCING
x86/include/asm/pgtable.h:#endif /* CONFIG_NUMA_BALANCING */

On the other hand, setup_numabalancing() is implemented in mm/mempolicy.c
which doesn't depend on architectures.

Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210302084159.33688-1-song.bao.hua@hisilicon.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:19:05 -07:00
Jonathan Neuschäfer
c44456f296 docs: kvm: Fix a typo ("althought")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20210301214722.2310911-1-j.neuschaefer@gmx.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:17:48 -07:00
Yanteng Si
5af38859ef docs/zh_CN: add riscv index.rst translation
This patch translates Documentation/riscv/index.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210228191054.6048-5-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:16:59 -07:00
Yanteng Si
b52e2a6e66 docs/zh_CN: add riscv pmu.rst translation
This patch translates Documentation/riscv/pmu.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210228191054.6048-4-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:16:59 -07:00
Yanteng Si
cb07e0977a docs/zh_CN: add riscv patch-acceptance.rst translation
This patch translates Documentation/riscv/patch-acceptance.rst into Chineae.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210228191054.6048-3-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:16:59 -07:00
Yanteng Si
d619afd344 docs/zh_CN:add riscv boot-image-header.rst translation
This patch translates Documentation/riscv/boot-image-header.rst intoChinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210228191054.6048-2-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:16:59 -07:00
Randy Dunlap
8bd490e4fc input: Documentation: corrections for uinput.rst
Fix a typo (supportinf -> supporting).

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20210302223523.20130-9-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:15:37 -07:00
Randy Dunlap
5c1841152b input: Documentation: corrections for input-programming.rst
Drop a repeated word.
Fix punctuation of "eg." to "e.g."
Fix punctuation of "ie" to "i.e."
Add hyphentation to non-zero.
Capitalize PM (for Power Management).
Capitalize ID (for Identifier).
Change "," in a run-on sentence to ";".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20210302223523.20130-8-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:15:36 -07:00
Randy Dunlap
365c6a3e0f input: Documentation: corrections for notifier.rst
Add 'ledstate' to the keyboard_notifier_param struct info and tell
which header file contains that struct.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20210302223523.20130-7-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:15:36 -07:00
Randy Dunlap
338b660bff input: Documentation: corrections for multi-touch-protocol.rst
Correct hyphenation, spelling, and capitalization.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Henrik Rydberg <rydberg@bitmath.org>
Link: https://lore.kernel.org/r/20210302223523.20130-6-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:15:36 -07:00
Randy Dunlap
ebe14885ab input: Documentation: corrections for gameport-programming.rst
Use "E.g." instead of "Eg.".
Use correct index for buttons[] array.
Update all of struct gameport's descriptions.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20210302223523.20130-5-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:15:36 -07:00
Randy Dunlap
a9600c9858 input: Documentation: update related file names in ff.rst
Change other related documentation file names from .txt to .rst
and be more explicit about their paths/locations.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Johann Deneux <johann.deneux@gmail.com>
Cc: Anssi Hannula <anssi.hannula@gmail.com>
Link: https://lore.kernel.org/r/20210302223523.20130-4-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:15:36 -07:00
Randy Dunlap
61be51c1a6 input: Documentation: corrections for event-codes.rst
Fix hyphenation, typos, capitalization, and a referenced file name
(.txt -> .rst).

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20210302223523.20130-3-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:15:36 -07:00
Randy Dunlap
d1c34bb205 input: Documentation: corrections for input.rst
Fix grammar, punctuation, and spelling.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20210302223523.20130-2-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08 17:15:36 -07:00