Add slave RPM ID to assist with identifying incorrect RPM config.
Signed-off-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20210205015205.22947-2-benl@squareup.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
To pick up the fixes sent for v5.12 and continue development based on
v5.12-rc2, i.e. without the swap on file bug.
This also gets a slightly newer and better tools/perf/arch/arm/util/cs-etm.c
patch version, using the BIT() macro, that had already been slated to
v5.13 but ended up going to v5.12-rc1 on an older version.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a driver for the Qualcomm interconnect busses found in
the SDM630/SDM636/SDM660 SoCs.
The topology consists of several NoCs that are controlled by a
remote processor that collects the aggregated bandwidth for each
master-slave pairs.
On a note, these chips are managing the "bus QoS" in a "hybrid"
fashion: some of the paths in the topology are managed through
(and by, of course) the RPM uC, while some others are "AP Owned",
meaning that the AP shall do direct writes to the appropriate
QoS registers for the specific paths and ports, instead of sending
an indication to the RPM and leaving the job to that one.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20201017133718.31327-3-kholk11@gmail.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add the bindings for the Qualcomm SDM660-class NoC, valid for
SDM630, SDM636, SDM660 and SDA variants.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201017133718.31327-2-kholk11@gmail.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When krealloc() fails and new is NULL, no error return code of
icc_link_destroy() is assigned.
To fix this bug, ret is assigned with -ENOMEM hen new is NULL.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210306132857.17020-1-baijiaju1990@gmail.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Some nodes are incorrectly marked as RPM-controlled (they have RPM
master and slave ids assigned), but are actually controlled by the
application CPU instead. The RPM complains when we send requests for
resources that it can't control. Let's fix this by replacing the IDs,
with the default "-1" in which case no requests are sent.
See commit c497f9322a ("interconnect: qcom: msm8916: Remove rpm-ids
from non-RPM nodes") where this was done for msm8916.
Signed-off-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20210205015205.22947-3-benl@squareup.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The documented behaviour for CMDLINE_EXTEND is that the arguments from
the bootloader are appended to the built-in kernel command line. This
also matches the option parsing behaviour for the EFI stub and early ID
register overrides.
Bizarrely, the fdt behaviour is the other way around: appending the
built-in command line to the bootloader arguments, resulting in a
command-line that doesn't necessarily line-up with the parsing order and
definitely doesn't line-up with the documented behaviour.
As it turns out, there is a proposal [1] to replace CMDLINE_EXTEND with
CMDLINE_PREPEND and CMDLINE_APPEND options which should hopefully make
the intended behaviour much clearer. While we wait for those to land,
drop CMDLINE_EXTEND for now as there appears to be little enthusiasm for
changing the current FDT behaviour.
[1] https://lore.kernel.org/lkml/20190319232448.45964-2-danielwa@cisco.com/
Cc: Max Uvarov <muvarov@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/CAL_JsqJX=TCCs7=gg486r9TN4NYscMTCLNfqJF9crskKPq-bTg@mail.gmail.com
Link: https://lore.kernel.org/r/20210303134927.18975-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The built-in kernel commandline (CONFIG_CMDLINE) can be configured in
three different ways:
1. CMDLINE_FORCE: Use CONFIG_CMDLINE instead of any bootloader args
2. CMDLINE_EXTEND: Append the bootloader args to CONFIG_CMDLINE
3. CMDLINE_FROM_BOOTLOADER: Only use CONFIG_CMDLINE if there aren't
any bootloader args.
The early cmdline parsing to detect idreg overrides gets (2) and (3)
slightly wrong: in the case of (2) the bootloader args are parsed first
and in the case of (3) the CMDLINE is always parsed.
Fix these issues by moving the bootargs parsing out into a helper
function and following the same logic as that used by the EFI stub.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Fixes: 3320030355 ("arm64: cpufeature: Add an early command-line cpufeature override facility")
Link: https://lore.kernel.org/r/20210303134927.18975-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The syzbot got FD of vmlinux BTF and passed it into map_create which caused
crash in btf_type_id_size() when it tried to access resolved_ids. The vmlinux
BTF doesn't have 'resolved_ids' and 'resolved_sizes' initialized to save
memory. To avoid such issues disallow using vmlinux BTF in prog_load and
map_create commands.
Fixes: 5329722057 ("bpf: Assign ID to vmlinux BTF and return extra info for BTF in GET_OBJ_INFO")
Reported-by: syzbot+8bab8ed346746e7540e8@syzkaller.appspotmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210307225248.79031-1-alexei.starovoitov@gmail.com
On 32-bit kernels, the stackprotector canary is quite nasty -- it is
stored at %gs:(20), which is nasty because 32-bit kernels use %fs for
percpu storage. It's even nastier because it means that whether %gs
contains userspace state or kernel state while running kernel code
depends on whether stackprotector is enabled (this is
CONFIG_X86_32_LAZY_GS), and this setting radically changes the way
that segment selectors work. Supporting both variants is a
maintenance and testing mess.
Merely rearranging so that percpu and the stack canary
share the same segment would be messy as the 32-bit percpu address
layout isn't currently compatible with putting a variable at a fixed
offset.
Fortunately, GCC 8.1 added options that allow the stack canary to be
accessed as %fs:__stack_chk_guard, effectively turning it into an ordinary
percpu variable. This lets us get rid of all of the code to manage the
stack canary GDT descriptor and the CONFIG_X86_32_LAZY_GS mess.
(That name is special. We could use any symbol we want for the
%fs-relative mode, but for CONFIG_SMP=n, gcc refuses to let us use any
name other than __stack_chk_guard.)
Forcibly disable stackprotector on older compilers that don't support
the new options and turn the stack canary into a percpu variable. The
"lazy GS" approach is now used for all 32-bit configurations.
Also makes load_gs_index() work on 32-bit kernels. On 64-bit kernels,
it loads the GS selector and updates the user GSBASE accordingly. (This
is unchanged.) On 32-bit kernels, it loads the GS selector and updates
GSBASE, which is now always the user base. This means that the overall
effect is the same on 32-bit and 64-bit, which avoids some ifdeffery.
[ bp: Massage commit message. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/c0ff7dba14041c7e5d1cae5d4df052f03759bef3.1613243844.git.luto@kernel.org
End users frequently want to know what features their processor
supports, independent of what the kernel supports.
/proc/cpuinfo is great. It is omnipresent and since it is provided by
the kernel it is always as up to date as the kernel. But, it could be
ambiguous about processor features which can be disabled by the kernel
at boot-time or compile-time.
There are some user space tools showing more raw features, but they are
not bound with kernel, and go with distros. Many end users are still
using old distros with new kernels (upgraded by themselves), and may
not upgrade the distros only to get a newer tool.
So here arise the need for a new tool, which
* shows raw CPU features read from the CPUID instruction
* will be easier to update compared to existing userspace
tooling (perhaps distributed like perf)
* inherits "modern" kernel development process, in contrast to some
of the existing userspace CPUID tools which are still being developed
without git and distributed in tarballs from non-https sites.
* Can produce output consistent with /proc/cpuinfo to make comparison
easier.
The CPUID leaf definitions are kept in an .csv file which allows for
updating only that file to add support for new feature leafs.
This is based on prototype code from Borislav Petkov
(http://sr71.net/~dave/intel/stupid-cpuid.c).
[ bp:
- Massage, add #define _GNU_SOURCE to fix implicit declaration of
function ‘strcasestr' warning
- remove superfluous newlines
- fallback to cpuid.csv in the current dir if none found
- fix typos
- move comments over the lines instead of sideways. ]
Originally-from: Borislav Petkov <bp@alien8.de>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1614928878-86075-1-git-send-email-feng.tang@intel.com
If the driver is unbound and then bound back it goes over the topology
and figure out the existing tunnels. However, if it finds DP tunnel it
should make sure the domain does not runtime suspend as otherwise it
will tear down the DP tunnel unexpectedly.
Fixes: 6ac6faee5d ("thunderbolt: Add runtime PM for Software CM")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
If there is a failure before the tb_switch_add() is called the switch
object is released by tb_switch_release() but at that point HopID IDAs
have not yet been initialized. So we see splat like this:
BUG: spinlock bad magic on CPU#2, kworker/u8:5/115
...
Workqueue: thunderbolt0 tb_handle_hotplug
Call Trace:
dump_stack+0x97/0xdc
? spin_bug+0x9a/0xa7
do_raw_spin_lock+0x68/0x98
_raw_spin_lock_irqsave+0x3f/0x5d
ida_destroy+0x4f/0x127
tb_switch_release+0x6d/0xfd
device_release+0x2c/0x7d
kobject_put+0x9b/0xbc
tb_handle_hotplug+0x278/0x452
process_one_work+0x1db/0x396
worker_thread+0x216/0x375
kthread+0x14d/0x155
? pr_cont_work+0x58/0x58
? kthread_blkcg+0x2e/0x2e
ret_from_fork+0x1f/0x40
Fix this by always initializing HopID IDAs in tb_switch_alloc().
Fixes: 0b2863ac3c ("thunderbolt: Add functions for allocating and releasing HopIDs")
Cc: stable@vger.kernel.org
Reported-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Commit
bbbd2b51a2 ("x86/platform/UV: Use new set memory block size function")
added a call to set the block size value that is needed by the kernel
to set the boundaries in the section list. This was done for UV Hubbed
systems but missed in the UV Hubless setup. Fix that mistake by adding
that same set call for hubless systems, which support the same NVRAMs
and Intel BIOS, thus the same problem occurs.
[ bp: Massage commit message. ]
Fixes: bbbd2b51a2 ("x86/platform/UV: Use new set memory block size function")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20210305162853.299892-1-mike.travis@hpe.com
print the firmware file name on error loading from fie system
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
On STM32MP1, the GPIO banks are subnodes of pin-controller@50002000,
see arch/arm/boot/dts/stm32mp151.dtsi. The driver for
pin-controller@50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c
and iterates over all of its DT subnodes when registering each GPIO
bank gpiochip. Each gpiochip has:
- gpio_chip.parent = dev,
where dev is the device node of the pin controller
- gpio_chip.of_node = np,
which is the OF node of the GPIO bank
Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node),
i.e. pin-controller@50002000 != pin-controller@50002000/gpio@5000*000.
The original code behaved correctly, as it extracted the "gpio-line-names"
from of_fwnode_handle(chip.of_node) = pin-controller@50002000/gpio@5000*000.
To achieve the same behaviour, read property from the firmware node.
Fixes: 7cba1a4d5e ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Reported-by: Marek Vasut <marex@denx.de>
Reported-by: Roman Guskov <rguskov@dh-electronics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The commit 0ea683931a ("gpio: dwapb: Convert driver to using the
GPIO-lib-based IRQ-chip") indeliberately made a regression on how
IRQ line from GPIO I²C expander is handled. I.e. it reveals that
the quirk for Intel Galileo Gen 2 misses the part of setting IRQ type
which previously was predefined by gpio-dwapb driver. Now, we have to
reorganize the approach to call necessary parts, which can be done via
ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk.
Without this fix and with above mentioned change the kernel hangs
on the first IRQ event with:
gpio gpiochip3: Persistence not supported for GPIO 1
irq 32, desc: 62f8fb50, depth: 0, count: 0, unhandled: 0
->handle_irq(): 41c7b0ab, handle_bad_irq+0x0/0x40
->irq_data.chip(): e03f1e72, 0xc2539218
->action(): 0ecc7e6f
->action->handler(): 8a3db21e, irq_default_primary_handler+0x0/0x10
IRQ_NOPROBE set
unexpected IRQ trap at vector 20
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Currently only search by index is supported. However, in some cases
we might need to pass the quirks to the acpi_dev_gpio_irq_get().
For this, split out acpi_dev_gpio_irq_get_by() and replace
acpi_dev_gpio_irq_get() by calling above with NULL for name parameter.
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
On some systems the ACPI tables has wrong pin number and instead of
having a relative one it provides an absolute one in the global GPIO
number space.
Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases.
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
fixed the following coccicheck:
./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT
Make sure threaded IRQs without a primary handler are always request
with IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make sure to hold the gpio_lock when removing the gpio device from the
gpio_devices list (when dropping the last reference) to avoid corrupting
the list when there are concurrent accesses.
Fixes: ff2b135922 ("gpio: make the gpiochip a real device")
Cc: stable@vger.kernel.org # 4.6
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fix a NULL-pointer deference when deregistering the gpio character
device that was introduced by the recent stub-driver hack. When the new
"driver" is unbound as part of deregistration, driver core clears the
driver-data pointer which is used to retrieve the struct gpio_device in
its release callback.
Fix this by using container_of() in the release callback as should have
been done all along.
Fixes: 4731210c09 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default")
Cc: Saravana Kannan <saravanak@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: syzbot+d27b4c8adbbff70fbfde@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The executable that we build for GPIO selftests was renamed to
gpio-mockup-cdev. Let's update .gitignore so that we don't show it
as an untracked file.
Fixes: 8bc395a6a2 ("selftests: gpio: rework and simplify test implementation")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add "arm,vexpress" to cpufreq-dt-platdev blacklist since the actual
scaling is handled by the firmware cpufreq drivers(scpi, scmi and
vexpress-spc).
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In case of error, the function ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 67fc209b52 ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since 5.12-rc1, the Device Tree blob must now be properly aligned.
Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.
This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.
Fixes: 79edff1206 ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Upon registering a console, safe buffers are activated when setting
up the sequence number to replay the log. However, these are already
protected by @console_sem and @syslog_lock. Remove the unnecessary
safe buffer usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-16-john.ogness@linutronix.de
kmsg_dump_rewind() and kmsg_dump_get_line() are lockless, so there is
no need for _nolock() variants. Remove these functions and switch all
callers of the _nolock() variants.
The functions without _nolock() were chosen because they are already
exported to kernel modules.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-15-john.ogness@linutronix.de
Since the ringbuffer is lockless, there is no need for it to be
protected by @logbuf_lock. Remove @logbuf_lock.
@console_seq, @exclusive_console_stop_seq, @console_dropped are
protected by @console_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-14-john.ogness@linutronix.de
Rather than storing the iterator information in the registered
kmsg_dumper structure, create a separate iterator structure. The
kmsg_dump_iter structure can reside on the stack of the caller, thus
allowing lockless use of the kmsg_dump functions.
Update code that accesses the kernel logs using the kmsg_dumper
structure to use the new kmsg_dump_iter structure. For kmsg_dumpers,
this also means adding a call to kmsg_dump_rewind() to initialize
the iterator.
All this is in preparation for removal of @logbuf_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org> # pstore
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-13-john.ogness@linutronix.de
All 6 kmsg_dumpers do not benefit from the @active flag:
(provide their own synchronization)
- arch/powerpc/kernel/nvram_64.c
- arch/um/kernel/kmsg_dump.c
- drivers/mtd/mtdoops.c
- fs/pstore/platform.c
(only dump on KMSG_DUMP_PANIC, which does not require
synchronization)
- arch/powerpc/platforms/powernv/opal-kmsg.c
- drivers/hv/vmbus_drv.c
The other 2 kmsg_dump users also do not rely on @active:
(hard-code @active to always be true)
- arch/powerpc/xmon/xmon.c
- kernel/debug/kdb/kdb_main.c
Therefore, @active can be removed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-12-john.ogness@linutronix.de
The global variables @syslog_seq, @syslog_partial, @syslog_time
and write access to @clear_seq are protected by @logbuf_lock.
Once @logbuf_lock is removed, these variables will need their
own synchronization method. Introduce @syslog_lock for this
purpose.
@syslog_lock is a raw_spin_lock for now. This simplifies the
transition to removing @logbuf_lock. Once @logbuf_lock and the
safe buffers are removed, @syslog_lock can change to spin_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-11-john.ogness@linutronix.de
@user->seq is indirectly protected by @logbuf_lock. Once @logbuf_lock
is removed, @user->seq will be no longer safe from an atomicity point
of view.
In preparation for the removal of @logbuf_lock, change it to
atomic64_t to provide this safety.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-10-john.ogness@linutronix.de
kmsg_dump_rewind_nolock() locklessly reads @clear_seq. However,
this is not done atomically. Since @clear_seq is 64-bit, this
cannot be an atomic operation for all platforms. Therefore, use
a seqcount_latch to allow readers to always read a consistent
value.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-9-john.ogness@linutronix.de
Instead of using "LOG_LINE_MAX + PREFIX_MAX" for temporary buffer
sizes, introduce CONSOLE_LOG_MAX. This represents the maximum size
that is allowed to be printed to the console for a single record.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-8-john.ogness@linutronix.de
The logic for finding records to fit into a buffer is the same for
kmsg_dump_get_buffer() and syslog_print_all(). Introduce a helper
function find_first_fitting_seq() to handle this logic.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-7-john.ogness@linutronix.de
kmsg_dump_get_buffer() requires nearly the same logic as
syslog_print_all(), but uses different variable names and
does not make use of the ringbuffer loop macros. Modify
kmsg_dump_get_buffer() so that the implementation is as similar
to syslog_print_all() as possible.
A follow-up commit will move this common logic into a
separate helper function.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-6-john.ogness@linutronix.de
struct kmsg_dumper still contains some fields that were used to
iterate the old ringbuffer. They are no longer used. Remove them
and update the struct documentation.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-5-john.ogness@linutronix.de
The second loop of syslog_print_all() subtracts lengths that were
added in the first loop. With commit b031a684bf ("printk: remove
logbuf_lock writer-protection of ringbuffer") it is possible that
records are (over)written during syslog_print_all(). This allows the
possibility of the second loop subtracting lengths that were never
added in the first loop.
This situation can result in syslog_print_all() filling the buffer
starting from a later record, even though there may have been room
to fit the earlier record(s) as well.
Fixes: b031a684bf ("printk: remove logbuf_lock writer-protection of ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-4-john.ogness@linutronix.de
The kmsg_dumper can be called from any context and CPU, possibly
from multiple CPUs simultaneously. Since the writing of the buffer
can occur from a later scheduled work queue, the oops buffer must
be protected against simultaneous dumping.
Use an atomic bit to mark when the buffer is protected. Release the
protection in between setting the buffer and the actual writing in
order for a possible panic (immediate write) to be written during
the scheduling of a previous oops (delayed write).
An atomic bit (rather than a spinlock) was chosen so that no
scheduling or preemption side-effects would be introduced. The MTD
kmsg_dumper may dump directly or it may be delayed (via scheduled
work). Depending on the context, different MTD callbacks are used.
For example, mtd_write() expects to be called in a non-atomic
context and may take a mutex.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-3-john.ogness@linutronix.de
The kmsg_dumper can be called from any context and CPU, possibly
from multiple CPUs simultaneously. Since a static buffer is used
to retrieve the kernel logs, this buffer must be protected against
simultaneous dumping. Skip dumping if another context is already
dumping.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-2-john.ogness@linutronix.de
Drop the two functions not used anymore in the driver.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There are cases when reading block of dwords in single transaction fail,
for several reasons, mostly if HW publish to implement all of the dwords,
while actually it doesn't or if some dwords not accessible for read
for security reasons. We handle these cases by trying to read the block,
dword-by-dword, one dword per transaction, till we get a failure.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
STM ltdc driver uses an empty implementation for its encoder.
Replace the code with the generic simple encoder.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302175700.28640-1-jagan@amarulasolutions.com