After set PROBE_PREFER_ASYNCHRONOUS flag on the mmc host drivers,
the order of /dev/mmcblkN was not fixed in some SoCs which have
multiple SDHI and/or MMCIF controllers. So, we were hard to use
such a device as rootfs by using the kernel parameter like
"root=/dev/mmcblkNpM".
According to the discussion on a mainling list [1], we can add
mmc aliases to fix the issue. So, add such aliases into R-Car Gen2
board dts files. Note that, since R-Car Gen2 is even more complicated
about SDHI and/or MMCIF channels variations and they share pins,
add the aliases into board dts files instead of SoC dtsi files.
[1]
https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/
Fixes: 7320915c88 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Fixes: 21b2cec61c ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1613131316-30994-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
To improve human readability and enable automatic validation, the tuples
in "playback" and "capture" properties in sound device nodes should be
grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210204130517.1647073-5-geert+renesas@glider.be
To improve human readability and enable automatic validation, the tuples
in "playback" and "capture" properties in sound device nodes should be
grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210204130517.1647073-3-geert+renesas@glider.be
To improve human readability and enable automatic validation, the tuples
in "cpus" properties in device nodes for Advanced Power Management Units
for AP-System Core (APMU) should be grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210204130517.1647073-2-geert+renesas@glider.be
The 8-bit ov7725 sensors can also be connected to the camera daughter
board.
This patch creates a separate dtsi file to describe an ov7725 sensor,
and includes it multiple times in r8a7742-iwg21d-q7-dbcm-ca.dts. The
user can (un)comment #include statements depending on the cameras
connected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
[geert: describe a single camera in the .dtsi, include multiple times]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210122113424.2833127-3-geert+renesas@glider.be
The camera daughter board can also be connected to 8-bit ov7725 sensors,
so in preparation for configurable option to choose depending on the
camera's connected separate out the ov5640 nodes in a dtsi file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
[geert: describe a single camera in the .dtsi, include multiple times]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210122113424.2833127-2-geert+renesas@glider.be
hrtimer_force_reprogram() and hrtimer_interrupt() invokes
__hrtimer_get_next_event() to find the earliest expiry time of hrtimer
bases. __hrtimer_get_next_event() does not update
cpu_base::[softirq_]_expires_next to preserve reprogramming logic. That
needs to be done at the callsites.
hrtimer_force_reprogram() updates cpu_base::softirq_expires_next only when
the first expiring timer is a softirq timer and the soft interrupt is not
activated. That's wrong because cpu_base::softirq_expires_next is left
stale when the first expiring timer of all bases is a timer which expires
in hard interrupt context. hrtimer_interrupt() does never update
cpu_base::softirq_expires_next which is wrong too.
That becomes a problem when clock_settime() sets CLOCK_REALTIME forward and
the first soft expiring timer is in the CLOCK_REALTIME_SOFT base. Setting
CLOCK_REALTIME forward moves the clock MONOTONIC based expiry time of that
timer before the stale cpu_base::softirq_expires_next.
cpu_base::softirq_expires_next is cached to make the check for raising the
soft interrupt fast. In the above case the soft interrupt won't be raised
until clock monotonic reaches the stale cpu_base::softirq_expires_next
value. That's incorrect, but what's worse it that if the softirq timer
becomes the first expiring timer of all clock bases after the hard expiry
timer has been handled the reprogramming of the clockevent from
hrtimer_interrupt() will result in an interrupt storm. That happens because
the reprogramming does not use cpu_base::softirq_expires_next, it uses
__hrtimer_get_next_event() which returns the actual expiry time. Once clock
MONOTONIC reaches cpu_base::softirq_expires_next the soft interrupt is
raised and the storm subsides.
Change the logic in hrtimer_force_reprogram() to evaluate the soft and hard
bases seperately, update softirq_expires_next and handle the case when a
soft expiring timer is the first of all bases by comparing the expiry times
and updating the required cpu base fields. Split this functionality into a
separate function to be able to use it in hrtimer_interrupt() as well
without copy paste.
Fixes: 5da7016046 ("hrtimer: Implement support for softirq based hrtimers")
Reported-by: Mikael Beckius <mikael.beckius@windriver.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikael Beckius <mikael.beckius@windriver.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210223160240.27518-1-anna-maria@linutronix.de
In order to group x86 related platform data move intel-spi.h to x86 folder.
While at it, remove duplicate inclusion in C file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ta: s/x85/x86]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20210304140820.56692-1-andriy.shevchenko@linux.intel.com
If the device is stuck in bootloader (maybe due to blank or corrupted
application firmware) it won't answer a query for the firmware version.
Fall back to returning the bootloader version in that case.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20210125182527.1225245-4-l.stach@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Factor out the vendor data i2c request handling to make it reusable
for other functions. Also don't cache the model and firmware version
string in the device private data as we never use the cached version,
but always read from the device.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20210125182527.1225245-3-l.stach@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Split out the multitouch event handling into its own function to allow other
events to be handled in the IRQ handler without disturbing the MT handling.
Now that things are separated a bit more, stop treating vendor data requests
special by cehcking for a locked mutex, but just look at the event ID to
figure out if the message is a MT report or a vendor data query reply.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20210125182527.1225245-2-l.stach@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for w25q512jvq. This is of the same series chip with
w25q256jv, which is already supported, but with size doubled and
different JEDEC ID.
Tested on Intel whitley platform with dd from/to the flash for
read/write respectly, and flash_erase for erasing the flash.
Signed-off-by: Shuhao Mai <shuhao.mai.1990@gmail.com>
[ta: put flash_info flags in order, first SPI_NOR_DUAL_READ, then
SPI_NOR_QUAD_READ]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210208075303.4200-1-shuhao.mai.1990@gmail.com
Martin reported an issue that directory read could be hung on the
latest -rc kernel with some certain image. The root cause is that
commit baa2c7c971 ("block: set .bi_max_vecs as actual allocated
vector number") changes .bi_max_vecs behavior. bio->bi_max_vecs
is set as actual allocated vector number rather than the requested
number now.
Let's avoid using .bi_max_vecs completely instead.
Link: https://lore.kernel.org/r/20210306040438.8084-1-hsiangkao@aol.com
Reported-by: Martin DEVERA <devik@eaxlabs.cz>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[ Gao Xiang: note that <= 5.11 kernels are not impacted. ]
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
The touch coordinate register contains the following:
byte 3 byte 2 byte 1
+--------+--------+ +-----------------+ +-----------------+
| | | | | | |
| X[3:0] | Y[3:0] | | Y[11:4] | | X[11:4] |
| | | | | | |
+--------+--------+ +-----------------+ +-----------------+
Bytes 2 and 1 need to be shifted left by 4 bits, the least significant
nibble of each is stored in byte 3. Currently they are only
being shifted by 3 causing the reported coordinates to be incorrect.
This matches downstream examples, and has been confirmed on my
device (OnePlus 7 Pro).
Fixes: 0145a7141e ("Input: add support for the Samsung S6SY761 touchscreen")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Fix wrong skipping for per-die aggregation in 'perf stat'.
- Fix race in signal handling on large core count machines, setting up signal
handlers earlier.
- Fix -F for branch & mem modes in 'perf report'.
- Fix the condition checks for max number of NUMA nodes in 'perf bench numa'.
- Fix crash in 'perf diff' error path.
- Fix filtering of empty build-ids in 'perf archive'.
- Ensure read cmdlines from libtraceevent are null terminated.
Recent regressions:
- Fix control fifo permissions in 'perf daemon'.
- Fix 'perf daemon' compile error with ASAN.
- Fix running 'perf daemon' test for non root user.
- Fix PERF_SAMPLE_WEIGHT_STRUCT 'perf test' failure on non-x86 arches.
- Fix event's PMU name parsing related to new drm/i915/gt
software-gt-awake-time event.
Fixes from compiler instrumentation:
- Fix leaks in 'perf test' entries, found using ASAN.
- Fix use-after-free when 'perf stat -r' option is used.
Arch specific:
- Fix bitmap for option om ARM's CS-ETM.
Documentation:
- Fix documentation of verbose options.
Build:
- Clean 'generated' directory used for creating the syscall table on x86.
- Fix ccache usage in $(CC) when generating arch errno table.
- Cast (struct timeval).tv_sec when printing, fixing the build with MUSL libc.
- Tighten snprintf() string precision to pass gcc check on some 32-bit arches.
- Update UAPI copies from the kernel sources.
- Fix regression on feature detection 'make clean' target.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYETKZwAKCRCyPKLppCJ+
J738AQD/oSMIvDtIzbXXgcW81vjKNRx4j2A1aP1CvPOzygdQ2wD6Ap4L8IYnbEkl
DSpJRiPVFbvXmNdAIM5aiD69sxltXg0=
=DnVm
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Perf tool fixes:
- Fix wrong skipping for per-die aggregation in 'perf stat'.
- Fix race in signal handling on large core count machines, setting
up signal handlers earlier.
- Fix -F for branch & mem modes in 'perf report'.
- Fix the condition checks for max number of NUMA nodes in 'perf
bench numa'.
- Fix crash in 'perf diff' error path.
- Fix filtering of empty build-ids in 'perf archive'.
- Ensure read cmdlines from libtraceevent are null terminated.
Recent regressions:
- Fix control fifo permissions in 'perf daemon'.
- Fix 'perf daemon' compile error with ASAN.
- Fix running 'perf daemon' test for non root user.
- Fix PERF_SAMPLE_WEIGHT_STRUCT 'perf test' failure on non-x86
arches.
- Fix event's PMU name parsing related to new drm/i915/gt
software-gt-awake-time event.
Fixes from compiler instrumentation:
- Fix leaks in 'perf test' entries, found using ASAN.
- Fix use-after-free when 'perf stat -r' option is used.
Arch specific:
- Fix bitmap for option om ARM's CS-ETM.
Documentation:
- Fix documentation of verbose options.
Build:
- Clean 'generated' directory used for creating the syscall table on
x86.
- Fix ccache usage in $(CC) when generating arch errno table.
- Cast (struct timeval).tv_sec when printing, fixing the build with
MUSL libc.
- Tighten snprintf() string precision to pass gcc check on some
32-bit arches.
- Update UAPI copies from the kernel sources.
- Fix regression on feature detection 'make clean' target"
* tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (44 commits)
perf cs-etm: Fix bitmap for option
perf trace: Fix race in signal handling
perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches
perf report: Fix -F for branch & mem modes
perf tests x86: Move insn.h include to make sure it finds stddef.h
perf test: Support the ins_lat check in the X86 specific test
perf test: Fix sample-parsing failure on non-x86 platforms
perf archive: Fix filtering of empty build-ids
perf daemon: Fix compile error with Asan
perf stat: Fix use-after-free when -r option is used
libperf: Add perf_evlist__reset_id_hash()
perf stat: Fix wrong skipping for per-die aggregation
tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update syscall.tbl files to support mount_setattr
perf test: Fix cpu and thread map leaks in perf_time_to_tsc test
perf test: Fix cpu map leaks in cpu_map_print test
perf test: Fix a memory leak in thread_map_remove test
perf test: Fix a thread map leak in thread_map_synthesize test
...
Pull parisc fixes from Helge Deller:
"Two small parisc architecture fixes: fix a linking failure reported by
the kernel test robot and remove a duplicate include"
* 'parisc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
arch/parisc/kernel: remove duplicate include in ptrace
parisc: Enable -mlong-calls gcc option with CONFIG_COMPILE_TEST
One non-fix, the conversion of vio_driver->remove() to return void, which
touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause soft/hard
lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is offline in the
second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only be seen
when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to:
Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph Plattner, Greg
Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria, Tyrel Datwyler, Uwe
Kleine-König.
-----BEGIN PGP SIGNATURE-----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=Jpjh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One non-fix, the conversion of vio_driver->remove() to return void,
which touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause
soft/hard lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is
offline in the second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only
be seen when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph
Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria,
Tyrel Datwyler, and Uwe Kleine-König"
* tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/sstep: Fix VSX instruction emulation
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
powerpc: Force inlining of mmu_has_feature to fix build failure
vio: make remove callback return void
powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()
powerpc/603: Fix protection of user pages mapped with PROT_NONE
powerpc/pseries: Don't enforce MSI affinity with kdump
powerpc/4xx: Fix build errors from mfdcr()
- Fix virt_addr_valid() W=1 compiler warnings.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYEOCxhUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XDVhAEAhrUK59RHWHUvp6uxCWPrmte4bzlM
ckIlxKK6yPAf+voA/iOlxsY+7FFLbAUiiYkK86AyVBnVO2gW2ahjk6EBVLQD
=em5R
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fix from Geert Uytterhoeven:
"Fix virt_addr_valid() W=1 compiler warnings.
This is a single non-critical fix. As the build bots are now testing
all new code with W=1, these warnings are popping up everywhere,
confusing people. Hence I think it makes sense to silence it as soon
as possible"
* tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Fix virt_addr_valid() W=1 compiler warnings
This brings the behavior back in line with what 5.11 and earlier did,
and this is no longer needed with the improved handling of creds
not needing to do unshare().
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With IORING_SETUP_ATTACH_WQ we should let __io_sq_thread() use the
initial creds from each ctx.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a simple warning making sure that nobody tries to create a new
manager while we're under IO_WQ_BIT_EXIT. That can potentially happen
due to racy work submission after final put.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_ring_exit_work() have to cancel all requests, including those staying
in io-wq, however it tries only cancellation of current tctx, which is
NULL. If we've got task==NULL, use the ctx-to-tctx map to go over all
tctx/io-wq and try cancellations on them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use system_unbound_wq to run io_ring_exit_work(), so it's hard to
monitor whether removal hang or not. Add WARN_ONCE to catch hangs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't use task file notes anymore, and no need left in indexing
task->io_uring->xa by file, and replace it with ctx. It's better
design-wise, especially since we keep a dangling file, and so have to
keep an eye on not dereferencing it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With ->flush() gone we're now leaving all uring file notes until the
task dies/execs, so the ctx will not be freed until all tasks that have
ever submit a request die. It was nicer with flush but not much, we
could have locked as described ctx in many cases.
Now we guarantee that ctx outlives all tctx in a sense that
io_ring_exit_work() waits for all tctxs to drop their corresponding
enties in ->xa, and ctx won't go away until then. Hence, additional
io_uring file reference (a.k.a. task file notes) are not needed anymore.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Another preparation patch. When full quiesce is done on ctx exit, use
task_work infra to remove corresponding to the ctx io_uring->xa entries.
For that we use the back tctx map. Also use ->in_idle to prevent
removing it while we traversing ->xa on cancellation, just ignore it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For each pair tcxt-ctx create an object and chain it into ctx, so we
have a way to traverse all tctx that are using current ctx. Preparation
patch, will be used later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rework io_uring_del_task_file(), so it accepts an index to delete, and
it's not necessarily have to be in the ->xa. Infer file from xa_erase()
to maintain a single origin of truth.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 6860510146 ("ARM: dts: exynos: Add support for audio over HDMI
for Odroid X/X2/U3") added assigned clocks under Clock Management Unit.
However the dtschema expects "clocks" property if "assigned-clocks" are
used. Add reference to input clock to silence the dtschema warnings:
arch/arm/boot/dts/exynos4412-odroidu3.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200906142146.21266-2-krzk@kernel.org
Since I plan to use my Canonical address for reviews and other
maintenance activities, reflect this in MAINTAINERS to avoid any
confusion.
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210304075751.9201-1-krzysztof.kozlowski@canonical.com
The dtschema expects pclk (APB clock) followed by aclk (AXI/AHB clock):
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml:
slim-sss@11140000: clock-names:0: 'pclk' was expected
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml:
slim-sss@11140000: clock-names:1: 'aclk' was expected
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210212163729.69882-1-krzk@kernel.org
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: 99bb20321f ("ARM: dts: s5pv210: Correct fuelgauge definition on Aries")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-10-krzk@kernel.org
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: c61248afa8 ("ARM: dts: Add max77686 RTC interrupt to cros5250-common")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-9-krzk@kernel.org
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: 47580e8d94 ("ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-8-krzk@kernel.org
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: f48b5050c3 ("ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-7-krzk@kernel.org
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: eea6653aae ("ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-6-krzk@kernel.org
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: 15dfdfad2d ("ARM: dts: Add basic dts for Exynos4412-based Trats 2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-5-krzk@kernel.org
The Maxim MUIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: 7eec126675 ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-4-krzk@kernel.org
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: e8614292cd ("ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-3-krzk@kernel.org
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: f48b5050c3 ("ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-2-krzk@kernel.org
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-1-krzk@kernel.org
Currently the array gpmc_cs is indexed by cs before it cs is range checked
and the pointer read from this out-of-index read is dereferenced. Fix this
by performing the range check on cs before the read and the following
pointer dereference.
Addresses-Coverity: ("Negative array index read")
Fixes: 9ed7a776eb ("ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210223193821.17232-1-colin.king@canonical.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Even though the JZ4740 did not have the OSD mode, it had (according to
the documentation) two DMA channels, but there is absolutely no
information about how to select the second DMA channel.
Make the ingenic-drm driver work in non-OSD mode by using the
foreground0 plane (which is bound to the DMA0 channel) as the primary
plane, instead of the foreground1 plane, which is the primary plane
when in OSD mode.
Fixes: 3c9bea4ef3 ("drm/ingenic: Add support for OSD mode")
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210124085552.29146-5-paul@crapouillou.net