We print twice the firmware status regarding security, once in
common code and once in asic code. Remove the print in asic code
and leave the common code print.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current CS jobs are no longer needed after their completion.
However, jobs of future workload might be in use even after they are
completed. To allow that, the patch adds a refcount to the job object,
and decouples its completion handling from its deallocation.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We need to have the MAX CS be much larger than the size of the
different queues. In GAUDI we have around 8 groups of queues, and each
group has 1K queue size. To prevent head-of-the-line blocking, we need
to make sure there is sufficient number of available CS allocations
even if one or more of those queues are full.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
failure in reading pre-boot verion is not handled correctly,
upon failure we need to reset the device in order to be able
to reinstall the driver.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Several header files are repeatedly included in many files.
Move these files to habanalabs.h which is included by all.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As in standard wait cs, we must release a signal fence once
a collective wait cs was dropped and not submitted.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are no internal queues if H/W queues are being used.
In this case we can skip the redundant traversal over the queues array,
looking for internal queues.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Slightly refactor the cs_do_release() function, to reduce nesting level
and to ease the handling of future CS types.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Refactor the CS IOCTL handling by gathering common code into
sub-functions, in order to ease future additions of new CS types.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once FW security is enabled there is no access to PLL registers,
need to read values from FW using a dedicated interface.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit refactors the MMU code to support PCI MMU page tables
residing on host and DCORE MMU residing on the device DRAM at the
same time.
This is needed for future devices as on GAUDI and GOYA we have
a single MMU where its page tables always reside on DRAM.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In cases of multi-tenants, administrators may want to prevent data
leakage between users running on the same device one after another.
To do that the driver can scrub the internal memory (both SRAM and
DRAM) after a user finish to use the memory.
Because in GAUDI the driver allows only one application to use the
device at a time, it can scrub the memory when user app close FD.
In future devices where we have MMU on the DRAM, we can scrub the DRAM
memory with a finer granularity (page granularity) when the user
allocates the memory.
This feature is not supported in Goya.
To allow users that want to debug their applications, we add a kernel
module parameter to load the driver with this feature disabled.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Skip relevant HW configurations once FW security is enabled
because these configurations are being performed by FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support for fetching security indication from FW.
This indication is needed in order to skip unnecessary
initializations done by FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix cs counters structure in uapi to be one flat structure instead
of two instances of the same other structure.
use atomic read/increment for context counters so we could use
one structure for both aggregated and context counters.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Today driver is able to load a whole FW binary into a specific
location on ASIC. We add support for loading sections from the
same FW binary into different loactions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Although we get a valid cs type from the callee, in case new values
will be added in the future, it is best to check the expected values
in that function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In GAUDI we don't have an MMU towards the HBM device memory. Therefore,
the user access that memory directly through physical address (via the
different engines) without the need to go through the driver to
allocate/free memory on the HBM.
For system monitoring purposes, the driver will keep track of the HBM
usage. This can be done as long as the user accurately reports the
allocations and releases of HBM memory, through the existing MEMORY
IOCTL uapi.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implement sync stream collective for GAUDI. Need to allocate additional
resources for that and add ctx_fini() to clean up those resources.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
DMA5 QMAN is designated to be used for reduction process, hence it will
be no longer configured as external queue.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Define new API for collective wait support and modify sync stream
common flow. In addition add kernel CB allocation support for
internal queues.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the future there will be situations where queues can accept either
kernel allocated CBs or user allocated CBs, depending on different
states.
Therefore, instead of using a boolean variable of kernel/user allocated
CB, we need to use a bitmask to indicate that, which will allow to
combine the two options.
Add a flag to the uapi so the user will be able to indicate whether
the CB was allocated by kernel or by user. Of course the driver
validates that.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Initialize the QMANs that are responsible to submit doorbells to the NIC
engines. Add support for stopping and disabling them, and reset them as
part of the hard-reset procedure of GAUDI. This will allow the user to
submit work to the NICs.
Add support for receiving events on QMAN errors from the firmware.
However, the nic_ports_mask is still initialized to 0. That means this code
won't initialize the QMANs just yet. That will be in a later patch.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Configure the security properties of the NIC IP. This is to prevent the
user process from doing something with the NIC that he shouldn't do. e.g.
crash the server, steal data, etc.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add new structures and messages that the driver use to interact with the
firmware to receive information and events (errors) about GAUDI's NIC.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add auto-generated header files that describe the NIC QMANs registers
used by the driver.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We already check if queue index is smaller than max queues a few lines
above this check so no need to check this again.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Support advanced monitor functionality to monitor more than a
single SOB. In addition expand all CB generation functions
with buffer offset in order to put in them multiple packets that are
generated by different functions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case we are running without MMU enabled (debug mode), no need to
initialize the VM module in the driver.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
No need to print when the driver starts to initialize the H/W. Drivers
should be silent when everything is OK.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The driver now loads the firmware in two stages. For debugging purposes
we need to support situations where only the first stage firmware is
loaded.
Therefore, use a bitmask to determine which F/W is loaded
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
F/W can be loaded but device CPU queues disabled. In that case, HWMON
should be disabled. This is only relevant when debugging
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case we will have multiple contexts/processes, we can't just
increment aggregated counters. We need to make them atomic as they can
be incremented by multiple processes
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Update the email to my kernel.org email address and update the git
repository address to the git.kernel.org
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
idle path. Similar to the entry path the low level idle functions have to
be non-instrumentable.
-----BEGIN PGP SIGNATURE-----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=raED
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
- Save and restore the GICV3 ITS state unconditionally on suspend/resume
to handle firmware which fails to do so.
- Use the correct index into the fwspec parameters to read the irq
trigger type in the EXIU chip driver.
-----BEGIN PGP SIGNATURE-----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=nOqf
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two fixes for irqchip drivers:
- Save and restore the GICV3 ITS state unconditionally on
suspend/resume to handle firmware which fails to do so.
- Use the correct index into the fwspec parameters to read the irq
trigger type in the EXIU chip driver"
* tag 'irq-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Unconditionally save/restore the ITS state on suspend
irqchip/exiu: Fix the index of fwspec for IRQ type
- revert efivarfs kmemleak fix again - it was a false positive;
- make CONFIG_EFI_EARLYCON depend on CONFIG_EFI explicitly so it does not
pull in other dependencies unnecessarily if CONFIG_EFI is not set
- defer attempts to load SSDT overrides from EFI vars until after the
efivar layer is up.
-----BEGIN PGP SIGNATURE-----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=gvBz
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"More EFI fixes forwarded from Ard Biesheuvel:
- revert efivarfs kmemleak fix again - it was a false positive
- make CONFIG_EFI_EARLYCON depend on CONFIG_EFI explicitly so it does
not pull in other dependencies unnecessarily if CONFIG_EFI is not
set
- defer attempts to load SSDT overrides from EFI vars until after the
efivar layer is up"
* tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: EFI_EARLYCON should depend on EFI
efivarfs: revert "fix memory leak in efivarfs_create()"
efi/efivars: Set generic ops before loading SSDT
resctrl fs (Xiaochen Shen)
- Correct prctl(PR_GET_SPECULATION_CTRL) reporting (Anand K Mistry)
- A fix to not lose already seen MCE severity which determines whether
the machine can recover (Gabriele Paoloni)
-----BEGIN PGP SIGNATURE-----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=JrT9
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A couple of urgent fixes which accumulated this last week:
- Two resctrl fixes to prevent refcount leaks when manipulating the
resctrl fs (Xiaochen Shen)
- Correct prctl(PR_GET_SPECULATION_CTRL) reporting (Anand K Mistry)
- A fix to not lose already seen MCE severity which determines
whether the machine can recover (Gabriele Paoloni)"
* tag 'x86_urgent_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Do not overwrite no_way_out if mce_end() fails
x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpb
x86/resctrl: Add necessary kernfs_put() calls to prevent refcount leak
x86/resctrl: Remove superfluous kernfs_get() calls to prevent refcount leak
I've collected a handful of fixes over the past few weeks:
* A fix to un-break the build-id argument to the vDSO build, which is necessary
for the LLVM linker.
* A fix to initialize the jump label subsystem, without which it (and all the
stuff that uses it) doesn't actually function.
* A fix to include <asm/barrier.h> from <vdso/processor.h>, without which some
drivers won't compile.
I know it's the holidays, but I had some hiccups getting this tested earlier
this week so it's just going out now. None of these are tremendously urgent,
so if they don't make rc6 it's not a big deal. I'll have some more fixes
coming next week either way.
-----BEGIN PGP SIGNATURE-----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=E9OC
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I've collected a handful of fixes over the past few weeks:
- A fix to un-break the build-id argument to the vDSO build, which is
necessary for the LLVM linker.
- A fix to initialize the jump label subsystem, without which it (and
all the stuff that uses it) doesn't actually function.
- A fix to include <asm/barrier.h> from <vdso/processor.h>, without
which some drivers won't compile"
* tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: fix barrier() use in <vdso/processor.h>
RISC-V: Add missing jump label initialization
riscv: Explicitly specify the build id style in vDSO Makefile again
- Fix die_entrypc() when DW_AT_ranges DWARF attribute not available.
- Cope with broken DWARF (missing DW_AT_declaration) generated by some recent
gcc versions.
- Do not generate CGROUP metadata events when not asked to in 'perf record'.
- Use proper CPU for shadow stats in 'perf stat'.
- Update copy of libbpf's hashmap.c, silencing tools/perf build warning.
- Fix return value in 'perf diff'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
# export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0-rc5.tar.xz
# dm
1 72.18 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 73.21 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 75.51 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 83.89 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 83.94 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 85.79 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 108.04 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 123.68 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 113.88 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 122.10 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
11 71.55 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 86.63 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
13 86.03 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
14 69.12 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 102.09 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 22.62 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 22.46 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 12.26 centos:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
Ancient gcc get this wrong:
/git/linux/tools/lib/bpf/libbpf.h:203: error: wrong number of arguments specified for 'deprecated' attribute
But when using NO_LIBBPF we should not hit this, changes for that to happen will land in 5.11 as they require
more surgery than advisable for this late in 5.10 rc.
19 33.41 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)
20 120.63 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
21 66.06 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201106 releases/gcc-10.2.0-475-g099857318c, clang version 10.0.1
22 79.16 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 81.78 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 77.96 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
25 94.99 debian:experimental : Ok gcc (Debian 10.2.0-17) 10.2.0, Debian clang version 11.0.0-5
26 31.16 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
27 31.70 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
28 32.24 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
29 72.56 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
30 84.45 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
31 26.11 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
32 87.01 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
33 96.83 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
34 97.03 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
35 110.42 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
36 114.68 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
37 119.29 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
38 25.98 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
39 118.15 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-4.fc31)
40 100.29 fedora:32 : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 10.0.1 (Fedora 10.0.1-3.fc32)
41 99.38 fedora:33 : Ok gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
42 100.58 fedora:rawhide : Ok gcc (GCC) 10.2.1 20201112 (Red Hat 10.2.1-8), clang version 11.0.0 (Fedora 11.0.0-2.fc34)
43 35.34 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
44 70.75 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
45 88.08 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
46 102.70 manjaro:latest : Ok gcc (GCC) 10.2.0, clang version 10.0.1
47 233.63 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-llvmorg-11.0.0/clang 63e22714ac938c6b537bd958f70680d3331a2030)
48 122.85 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
49 129.40 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
50 119.24 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
51 118.04 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
52 113.77 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
53 12.28 oraclelinux:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
See explanation for centos:6
54 32.96 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
55 118.62 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
56 28.53 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
57 32.09 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
58 82.55 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
59 27.51 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
60 27.50 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
61 26.60 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
62 27.62 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
63 27.34 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 26.65 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 93.65 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
66 29.22 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
67 28.99 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
68 23.38 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
69 28.46 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
70 29.81 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
71 29.57 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 163.50 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 26.30 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 28.60 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
75 25.66 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 71.98 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
77 27.80 ubuntu:19.10-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
78 25.49 ubuntu:19.10-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
79 77.46 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1
80 31.63 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0
81 78.23 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2
$
# uname -a
Linux quaco 5.9.11-100.fc32.x86_64 #1 SMP Tue Nov 24 19:16:53 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
a9ffd0484e perf probe: Change function definition check due to broken DWARF
# perf version --build-options
perf version 5.10.rc5.ga9ffd0484eb4
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Skip (some metrics failed)
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: PE file support : Ok
69: Event expansion for cgroups : Ok
70: x86 rdpmc : Ok
71: Convert perf time to TSC : Ok
72: DWARF unwind : Ok
73: x86 instruction decoder - new instructions : Ok
74: Intel PT packet decoder : Ok
75: x86 bp modify : Ok
76: probe libc's inet_pton & backtrace it with ping : Ok
77: Use vfs_getname probe to get syscall args filenames : Ok
78: Check Arm CoreSight trace data recording and synthesized samples: Skip
79: build id cache operations : Ok
80: Add vfs_getname probe to get syscall args filenames : Ok
81: Check open filename arg using perf trace + vfs_getname : Ok
82: Zstd perf.data compression/decompression : Ok
#
$ git log --oneline -1
a9ffd0484e (HEAD -> perf/urgent) perf probe: Change function definition check due to broken DWARF
$ time make -C tools/perf build-test
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_with_gtk2_O: make GTK2=1
make_no_libperl_O: make NO_LIBPERL=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_doc_O: make doc
make_no_newt_O: make NO_NEWT=1
make_util_map_o_O: make util/map.o
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_tags_O: make tags
make_no_libbionic_O: make NO_LIBBIONIC=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_sdt_O: make NO_SDT=1
make_no_libelf_O: make NO_LIBELF=1
make_perf_o_O: make perf.o
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_pure_O: make
make_with_libpfm4_O: make LIBPFM4=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_install_bin_O: make install-bin
make_install_prefix_O: make install prefix=/tmp/krava
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_no_gtk2_O: make NO_GTK2=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_no_slang_O: make NO_SLANG=1
make_debug_O: make DEBUG=1
make_help_O: make help
make_clean_all_O: make clean all
make_no_demangle_O: make NO_DEMANGLE=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_install_O: make install
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_libbpf_O: make NO_LIBBPF=1
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCX8JsJwAKCRCyPKLppCJ+
J5kZAP0Q+cOvU+1fLdAkBxxfRZyCyTfpiN43cM38p6mFEIlJ6wD7BYQ+MrSgToqa
hMasgGERJpMSHDjGOF96+fUfrq1GAQs=
=ZOJc
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.10-2020-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Fix die_entrypc() when DW_AT_ranges DWARF attribute not available
- Cope with broken DWARF (missing DW_AT_declaration) generated by some
recent gcc versions
- Do not generate CGROUP metadata events when not asked to in 'perf
record'
- Use proper CPU for shadow stats in 'perf stat'
- Update copy of libbpf's hashmap.c, silencing tools/perf build warning
- Fix return value in 'perf diff'
* tag 'perf-tools-fixes-for-v5.10-2020-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf probe: Change function definition check due to broken DWARF
perf probe: Fix to die_entrypc() returns error correctly
perf stat: Use proper cpu for shadow stats
perf record: Synthesize cgroup events only if needed
perf diff: Fix error return value in __cmd_diff()
perf tools: Update copy of libbpf's hashmap.c
Here are a few small USB and PHY driver fixes for 5.10-rc6. They
include:
- small PHY driver fixes to resolve reported issues
- USB quirks added for "broken" devices
- typec fixes for reported problems
- USB gadget fixes for small issues
Full details are in the shortlog, nothing major in here and all have
been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8I/Zw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylW8wCfeC+naWV26DHdh8B/CR0Ku9pi3+IAn2VbIPYG
r34bOIGwc4X5jbMBrLoz
=31VX
-----END PGP SIGNATURE-----
Merge tag 'usb-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY driver fixes from Greg KH:
"Here are a few small USB and PHY driver fixes for 5.10-rc6. They
include:
- small PHY driver fixes to resolve reported issues
- USB quirks added for "broken" devices
- typec fixes for reported problems
- USB gadget fixes for small issues
Full details are in the shortlog, nothing major in here and all have
been in linux-next with no reported issues"
* tag 'usb-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: stusb160x: fix power-opmode property with typec-power-opmode
USB: core: Change %pK for __user pointers to %px
USB: core: Fix regression in Hercules audio card
usb: gadget: Fix memleak in gadgetfs_fill_super
usb: gadget: f_midi: Fix memleak in f_midi_alloc
USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO built-in usb-audio card
usb: typec: qcom-pmic-typec: fix builtin build errors
phy: mediatek: fix spelling mistake in Kconfig "veriosn" -> "version"
phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependency
phy: qualcomm: usb: Fix SuperSpeed PHY OF dependency
phy: intel: PHY_INTEL_KEEMBAY_EMMC should depend on ARCH_KEEMBAY
usb: cdns3: gadget: calculate TD_SIZE based on TD
usb: cdns3: gadget: initialize link_trb as NULL
phy: cpcap-usb: Use IRQF_ONESHOT
phy: qcom-qmp: Initialize another pointer to NULL
phy: tegra: xusb: Fix dangling pointer on probe failure
phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211
