mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-12 06:01:58 +00:00
1,264,537 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Heiner Kallweit
|
031a239c22 |
r8169: switch to new function phy_support_eee
Switch to new function phy_support_eee. This allows to simplify the code because data->tx_lpi_enabled is now populated by phy_ethtool_get_eee(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/92462328-5c9b-4d82-9ce4-ea974cda4900@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Heiner Kallweit
|
c786459fc8 |
net: phy: simplify a check in phy_check_link_status
Handling case err == 0 in the other branch allows to simplify the code. In addition I assume in "err & phydev->eee_cfg.tx_lpi_enabled" it should have been a logical and operator. It works as expected also with the bitwise and, but using a bitwise and with a bool value looks ugly to me. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/de37bf30-61dd-49f9-b645-2d8ea11ddb5d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Andy Shevchenko
|
22ca20fd12 |
net: phy: marvell-88x2222: Remove unused of_gpio.h
of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240307122346.3677534-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Justin Swartz
|
2920dd92b9 |
net: dsa: mt7530: disable LEDs before reset
Disable LEDs just before resetting the MT7530 to avoid
situations where the ESW_P4_LED_0 and ESW_P3_LED_0 pin
states may cause an unintended external crystal frequency
to be selected.
The HT_XTAL_FSEL (External Crystal Frequency Selection)
field of HWTRAP (the Hardware Trap register) stores a
2-bit value that represents the state of the ESW_P4_LED_0
and ESW_P4_LED_0 pins (seemingly) sampled just after the
MT7530 has been reset, as:
ESW_P4_LED_0 ESW_P3_LED_0 Frequency
-----------------------------------------
0 1 20MHz
1 0 40MHz
1 1 25MHz
The value of HT_XTAL_FSEL is bootstrapped by pulling
ESW_P4_LED_0 and ESW_P3_LED_0 up or down accordingly,
but:
if a 40MHz crystal has been selected and
the ESW_P3_LED_0 pin is high during reset,
or a 20MHz crystal has been selected and
the ESW_P4_LED_0 pin is high during reset,
then the value of HT_XTAL_FSEL will indicate
that a 25MHz crystal is present.
By default, the state of the LED pins is PHY controlled
to reflect the link state.
To illustrate, if a board has:
5 ports with active low LED control,
and HT_XTAL_FSEL bootstrapped for 40MHz.
When the MT7530 is powered up without any external
connection, only the LED associated with Port 3 is
illuminated as ESW_P3_LED_0 is low.
In this state, directly after mt7530_setup()'s reset
is performed, the HWTRAP register (0x7800) reflects
the intended HT_XTAL_FSEL (HWTRAP bits 10:9) of 40MHz:
mt7530-mdio mdio-bus:1f: mt7530_read: 00007800 == 00007dcf
>>> bin(0x7dcf >> 9 & 0b11)
'0b10'
But if a cable is connected to Port 3 and the link
is active before mt7530_setup()'s reset takes place,
then HT_XTAL_FSEL seems to be set for 25MHz:
mt7530-mdio mdio-bus:1f: mt7530_read: 00007800 == 00007fcf
>>> bin(0x7fcf >> 9 & 0b11)
'0b11'
Once HT_XTAL_FSEL reflects 25MHz, none of the ports
are functional until the MT7621 (or MT7530 itself)
is reset.
By disabling the LED pins just before reset, the chance
of an unintended HT_XTAL_FSEL value is reduced.
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Link: https://lore.kernel.org/r/20240305043952.21590-1-justin.swartz@risingedge.co.za
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Andy Shevchenko
|
86a7abbb22 |
net: mdio_bus: Remove unused of_gpio.h
of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240307122231.3677241-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Ricardo B. Marliere
|
c057eddcb4 |
ptp: make ptp_class constant
Since commit
|
||
William Tu
|
8f4cd89bf1 |
devlink: Fix length of eswitch inline-mode
Set eswitch inline-mode to be u8, not u16. Otherwise, errors below
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev \
inline-mode network
Error: Attribute failed policy validation.
kernel answers: Numerical result out of rang
netlink: 'devlink': attribute type 26 has an invalid length.
Fixes:
|
||
Pawan Gupta
|
2a0180129d |
KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests
Mitigation for RFDS requires RFDS_CLEAR capability which is enumerated by MSR_IA32_ARCH_CAPABILITIES bit 27. If the host has it set, export it to guests so that they can deploy the mitigation. RFDS_NO indicates that the system is not vulnerable to RFDS, export it to guests so that they don't deploy the mitigation unnecessarily. When the host is not affected by X86_BUG_RFDS, but has RFDS_NO=0, synthesize RFDS_NO to the guest. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Pawan Gupta
|
8076fcde01 |
x86/rfds: Mitigate Register File Data Sampling (RFDS)
RFDS is a CPU vulnerability that may allow userspace to infer kernel stale data previously used in floating point registers, vector registers and integer registers. RFDS only affects certain Intel Atom processors. Intel released a microcode update that uses VERW instruction to clear the affected CPU buffers. Unlike MDS, none of the affected cores support SMT. Add RFDS bug infrastructure and enable the VERW based mitigation by default, that clears the affected buffers just before exiting to userspace. Also add sysfs reporting and cmdline parameter "reg_file_data_sampling" to control the mitigation. For details see: Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Pawan Gupta
|
4e42765d1b |
Documentation/hw-vuln: Add documentation for RFDS
Add the documentation for transient execution vulnerability Register File Data Sampling (RFDS) that affects Intel Atom CPUs. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Pawan Gupta
|
e95df4ec0c |
x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set
Currently MMIO Stale Data mitigation for CPUs not affected by MDS/TAA is to only deploy VERW at VMentry by enabling mmio_stale_data_clear static branch. No mitigation is needed for kernel->user transitions. If such CPUs are also affected by RFDS, its mitigation may set X86_FEATURE_CLEAR_CPU_BUF to deploy VERW at kernel->user and VMentry. This could result in duplicate VERW at VMentry. Fix this by disabling mmio_stale_data_clear static branch when X86_FEATURE_CLEAR_CPU_BUF is enabled. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> |
||
Linus Torvalds
|
045395d86a |
cgroup: Changes for 6.9
A quiet cycle. One trivial doc update patch. Two patches to drop now defunct memory_spread_slab feature from cgroup1 cpuset. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZe7MVQ4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGR59APwO8h/GCRH0KovpemkjsIHxicWMlvfHVleIdS4l FY7lLgD+JGucXcxd4YM/ZAZkj9pSUvrEm46n+Jrst7GFH8lfUQ0= =YY0C -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "A quiet cycle. One trivial doc update patch. Two patches to drop the now defunct memory_spread_slab feature from cgroup1 cpuset" * tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Mark memory_spread_slab as obsolete cgroup/cpuset: Remove cpuset_do_slab_mem_spread() docs: cgroup-v1: add missing code-block tags |
||
Hangbin Liu
|
44208f5936 |
netlink: specs: support unterminated-ok
ynl-gen-c.py supports check unterminated-ok, but the yaml schemas don't have this key. Add this to the yaml files. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240308081239.3281710-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Hangbin Liu
|
8d0c314c30 |
tools: ynl-gen: support using pre-defined values in attr checks
Support using pre-defined values in checks so we don't need to use hard
code number for the string, binary length. e.g. we have a definition like
#define TEAM_STRING_MAX_LEN 32
Which defined in yaml like:
definitions:
-
name: string-max-len
type: const
value: 32
It can be used in the attribute-sets like
attribute-sets:
-
name: attr-option
name-prefix: team-attr-option-
attributes:
-
name: name
type: string
checks:
len: string-max-len
With this patch it will be converted to
[TEAM_ATTR_OPTION_NAME] = { .type = NLA_STRING, .len = TEAM_STRING_MAX_LEN, }
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240311140727.109562-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Linus Torvalds
|
1a1e09890c |
workqueue: BH workqueue conversions for v6.9
This pull request contains two patches that convert tasklet users to BH workqueue - backtractest and usb hcd. DM conversions are being routed through the respective subsystem tree. Hopefully, the next cycle will see a lot more conversions. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZe7KuA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGUmfAQC6bbrghugnvvAREeJSymM6aATfICTrN98FdBIC cRn5KgEAqDpKcFA2zbWXPPU7KGBjAAYX199XFc9+NqiXpvCfoA8= =uQz1 -----END PGP SIGNATURE----- Merge tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue BH conversions from Tejun Heo: "This contains two patches that convert tasklet users to BH workqueues: backtracetest and usb hcd. DM conversions are being routed through the respective subsystem tree. Hopefully, the next cycle will see a lot more conversions" * tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: usb: core: hcd: Convert from tasklet to BH workqueue backtracetest: Convert from tasklet to BH workqueue |
||
Mina Almasry
|
46f40172b6 |
net: page_pool: factor out page_pool recycle check
The check is duplicated in 2 places, factor it out into a common helper. Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20240308204500.1112858-1-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
ff887eb07c |
workqueue: Changes for v6.9
This cycle, a lot of workqueue changes including some that are significant and invasive. - During v6.6 cycle, unbound workqueues were updated so that they are more topology aware and flexible, which among other things improved workqueue behavior on modern multi-L3 CPUs. In the process, |
||
|
Linus Torvalds
|
8ede842f66 |
Rust changes for v6.9
Another routine one in terms of features. We got two version upgrades
this time, but in terms of lines, 'alloc' changes are not very large.
Toolchain and infrastructure:
- Upgrade to Rust 1.76.0.
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove two
more unstable features ('const_maybe_uninit_zeroed' and
'ptr_metadata') from the list, among other improvements.
- Mark 'rustc' (and others) invocations as recursive, which fixes a new
warning and prepares us for the future in case we eventually take
advantage of the Make jobserver.
'kernel' crate:
- Add the 'container_of!' macro.
- Stop using the unstable 'ptr_metadata' feature by employing the now
stable 'byte_sub' method to implement 'Arc::from_raw()'.
- Add the 'time' module with a 'msecs_to_jiffies()' conversion function
to begin with, to be used by Rust Binder.
- Add 'notify_sync()' and 'wait_interruptible_timeout()' methods to
'CondVar', to be used by Rust Binder.
- Update integer types for 'CondVar'.
- Rename 'wait_list' field to 'wait_queue_head' in 'CondVar'.
- Implement 'Display' and 'Debug' for 'BStr'.
- Add the 'try_from_foreign()' method to the 'ForeignOwnable' trait.
- Add reexports for macros so that they can be used from the right
module (in addition to the root).
- A series of code documentation improvements, including adding
intra-doc links, consistency improvements, typo fixes...
'macros' crate:
- Place generated 'init_module()' function in '.init.text'.
Documentation:
- Add documentation on Rust doctests and how they work.
-----BEGIN PGP SIGNATURE-----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=BAGo
-----END PGP SIGNATURE-----
Merge tag 'rust-6.9' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. We got two version upgrades
this time, but in terms of lines, 'alloc' changes are not very large.
Toolchain and infrastructure:
- Upgrade to Rust 1.76.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove
two more unstable features ('const_maybe_uninit_zeroed' and
'ptr_metadata') from the list, among other improvements
- Mark 'rustc' (and others) invocations as recursive, which fixes a
new warning and prepares us for the future in case we eventually
take advantage of the Make jobserver
'kernel' crate:
- Add the 'container_of!' macro
- Stop using the unstable 'ptr_metadata' feature by employing the now
stable 'byte_sub' method to implement 'Arc::from_raw()'
- Add the 'time' module with a 'msecs_to_jiffies()' conversion
function to begin with, to be used by Rust Binder
- Add 'notify_sync()' and 'wait_interruptible_timeout()' methods to
'CondVar', to be used by Rust Binder
- Update integer types for 'CondVar'
- Rename 'wait_list' field to 'wait_queue_head' in 'CondVar'
- Implement 'Display' and 'Debug' for 'BStr'
- Add the 'try_from_foreign()' method to the 'ForeignOwnable' trait
- Add reexports for macros so that they can be used from the right
module (in addition to the root)
- A series of code documentation improvements, including adding
intra-doc links, consistency improvements, typo fixes...
'macros' crate:
- Place generated 'init_module()' function in '.init.text'
Documentation:
- Add documentation on Rust doctests and how they work"
* tag 'rust-6.9' of https://github.com/Rust-for-Linux/linux: (29 commits)
rust: upgrade to Rust 1.76.0
kbuild: mark `rustc` (and others) invocations as recursive
rust: add `container_of!` macro
rust: str: implement `Display` and `Debug` for `BStr`
rust: module: place generated init_module() function in .init.text
rust: types: add `try_from_foreign()` method
docs: rust: Add description of Rust documentation test as KUnit ones
docs: rust: Move testing to a separate page
rust: kernel: stop using ptr_metadata feature
rust: kernel: add reexports for macros
rust: locked_by: shorten doclink preview
rust: kernel: remove unneeded doclink targets
rust: kernel: add doclinks
rust: kernel: add blank lines in front of code blocks
rust: kernel: mark code fragments in docs with backticks
rust: kernel: unify spelling of refcount in docs
rust: str: move SAFETY comment in front of unsafe block
rust: str: use `NUL` instead of 0 in doc comments
rust: kernel: add srctree-relative doclinks
rust: ioctl: end top-level module docs with full stop
...
|
||
|
Linus Torvalds
|
5a2a15cd7f |
Compiler Attributes changes for v6.9
A couple trivial changes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmXsVlcACgkQGXyLc2ht IW3yFRAApUQnxyEC4zZ7yqIiRemAzjVuP7LEN3fuG9/JH1phYJOZqUC+sDK5UHvp p0sLMTeX7VeyirWSB/eZD5lpDN5ZB1qfIiVJ4J5o5fQ7oJ6nk+PkdjWYaXkB0oKJ gtb4JKQxBLwJWLrN5scVYdKlSqQX/fTp49r1q+8CiOuvCLmPRGfF4OJxWZzzv0AM Ezv4Y4xjlrG5bA14zmo4pN1F5whhBf0TUU79Z+z9ketMNDLPsioEw+O24mVlsVLo DCHjGf0DVmhq2nj2QykgAoIq+7Yf6Pp/CcSmJfRFW1/8edEZpGObqNCXzitNgZFR /a5HdNfVgtTl03mQ2bBwJAd1myfjAewRiS/MlR3H6NuCdBwoIWHRNbLdCLqb7qY3 p5jSer4FVvDg8Qc89mgKULxIALtdOsqTgBs3iyack7w+yR7YmnlmaphNcx7IMSp3 8n5dnXDMOlPOB4U9E0Ixy7VK9Jx1RGAMKDETsaHTNRBUslYj55hDRH4PIePoiRFG yvWmyC/ZUbHt1L1hcgEsECrkT965VCq+pPg4pHtxadGREijVXGIF6QMjEfDkpaue KdI34sfRasLo83kQ4Yb3a4jE1XUl7I0TS6oXtwsFnpX0OQmQil/7CUzS7w8SJusE N3NGxrHesKOb/sPyCcGSXj5VnxPx50T4rTdXfKJGb5/94+oJt/Q= =dnO4 -----END PGP SIGNATURE----- Merge tag 'compiler-attributes-6.9' of https://github.com/ojeda/linux Pull compiler attributes update from Miguel Ojeda: "Trivial fixes to the __counted_by comments" * tag 'compiler-attributes-6.9' of https://github.com/ojeda/linux: Compiler Attributes: counted_by: fixup clang URL Compiler Attributes: counted_by: bump min gcc version |
||
Alex Williamson
|
7447d911af |
vfio/fsl-mc: Block calling interrupt handler without trigger
The eventfd_ctx trigger pointer of the vfio_fsl_mc_irq object is
initially NULL and may become NULL if the user sets the trigger
eventfd to -1. The interrupt handler itself is guaranteed that
trigger is always valid between request_irq() and free_irq(), but
the loopback testing mechanisms to invoke the handler function
need to test the trigger. The triggering and setting ioctl paths
both make use of igate and are therefore mutually exclusive.
The vfio-fsl-mc driver does not make use of irqfds, nor does it
support any sort of masking operations, therefore unlike vfio-pci
and vfio-platform, the flow can remain essentially unchanged.
Cc: Diana Craciun <diana.craciun@oss.nxp.com>
Cc: <stable@vger.kernel.org>
Fixes:
|
||
|
Alex Williamson
|
675daf435e |
vfio/platform: Create persistent IRQ handlers
The vfio-platform SET_IRQS ioctl currently allows loopback triggering of
an interrupt before a signaling eventfd has been configured by the user,
which thereby allows a NULL pointer dereference.
Rather than register the IRQ relative to a valid trigger, register all
IRQs in a disabled state in the device open path. This allows mask
operations on the IRQ to nest within the overall enable state governed
by a valid eventfd signal. This decouples @masked, protected by the
@locked spinlock from @trigger, protected via the @igate mutex.
In doing so, it's guaranteed that changes to @trigger cannot race the
IRQ handlers because the IRQ handler is synchronously disabled before
modifying the trigger, and loopback triggering of the IRQ via ioctl is
safe due to serialization with trigger changes via igate.
For compatibility, request_irq() failures are maintained to be local to
the SET_IRQS ioctl rather than a fatal error in the open device path.
This allows, for example, a userspace driver with polling mode support
to continue to work regardless of moving the request_irq() call site.
This necessarily blocks all SET_IRQS access to the failed index.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes:
|
||
|
Alex Williamson
|
fcdc0d3d40 |
vfio/platform: Disable virqfds on cleanup
irqfds for mask and unmask that are not specifically disabled by the
user are leaked. Remove any irqfds during cleanup
Cc: Eric Auger <eric.auger@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes:
|
||
|
Alex Williamson
|
18c198c96a |
vfio/pci: Create persistent INTx handler
A vulnerability exists where the eventfd for INTx signaling can be
deconfigured, which unregisters the IRQ handler but still allows
eventfds to be signaled with a NULL context through the SET_IRQS ioctl
or through unmask irqfd if the device interrupt is pending.
Ideally this could be solved with some additional locking; the igate
mutex serializes the ioctl and config space accesses, and the interrupt
handler is unregistered relative to the trigger, but the irqfd path
runs asynchronous to those. The igate mutex cannot be acquired from the
atomic context of the eventfd wake function. Disabling the irqfd
relative to the eventfd registration is potentially incompatible with
existing userspace.
As a result, the solution implemented here moves configuration of the
INTx interrupt handler to track the lifetime of the INTx context object
and irq_type configuration, rather than registration of a particular
trigger eventfd. Synchronization is added between the ioctl path and
eventfd_signal() wrapper such that the eventfd trigger can be
dynamically updated relative to in-flight interrupts or irqfd callbacks.
Cc: <stable@vger.kernel.org>
Fixes:
|
||
|
Alex Williamson
|
b620ecbd17 |
vfio: Introduce interface to flush virqfd inject workqueue
In order to synchronize changes that can affect the thread callback, introduce an interface to force a flush of the inject workqueue. The irqfd pointer is only valid under spinlock, but the workqueue cannot be flushed under spinlock. Therefore the flush work for the irqfd is queued under spinlock. The vfio_irqfd_cleanup_wq workqueue is re-used for queuing this work such that flushing the workqueue is also ordered relative to shutdown. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20240308230557.805580-4-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Alex Williamson
|
810cd4bb53 |
vfio/pci: Lock external INTx masking ops
Mask operations through config space changes to DisINTx may race INTx
configuration changes via ioctl. Create wrappers that add locking for
paths outside of the core interrupt code.
In particular, irq_type is updated holding igate, therefore testing
is_intx() requires holding igate. For example clearing DisINTx from
config space can otherwise race changes of the interrupt configuration.
This aligns interfaces which may trigger the INTx eventfd into two
camps, one side serialized by igate and the other only enabled while
INTx is configured. A subsequent patch introduces synchronization for
the latter flows.
Cc: <stable@vger.kernel.org>
Fixes:
|
||
|
Alex Williamson
|
fe9a708268 |
vfio/pci: Disable auto-enable of exclusive INTx IRQ
Currently for devices requiring masking at the irqchip for INTx, ie.
devices without DisINTx support, the IRQ is enabled in request_irq()
and subsequently disabled as necessary to align with the masked status
flag. This presents a window where the interrupt could fire between
these events, resulting in the IRQ incrementing the disable depth twice.
This would be unrecoverable for a user since the masked flag prevents
nested enables through vfio.
Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx
is never auto-enabled, then unmask as required.
Cc: <stable@vger.kernel.org>
Fixes:
|
||
|
Linus Torvalds
|
e5a3878c94 |
RCU pull request for v6.9
This pull request contains the following branches:
rcu-doc.2024.02.14a: Documentation updates.
rcu-nocb.2024.02.14a: RCU NOCB updates, code cleanups, unnecessary
barrier removals and minor bug fixes.
rcu-exp.2024.02.14a: RCU exp, fixing a circular dependency between
workqueue and RCU expedited callback handling.
rcu-tasks.2024.02.26a: RCU tasks, avoiding deadlocks in do_exit() when
calling synchronize_rcu_task() with a mutex hold, maintaining
real-time response in rcu_tasks_postscan() and a minor
fix for tasks trace quiescence check.
rcu-misc.2024.02.14a: Misc updates, comments and readibility
improvement, boot time parameter for lazy RCU and rcutorture
improvement.
-----BEGIN PGP SIGNATURE-----
iQFJBAABCAAzFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmXev80VHGJvcXVuLmZl
bmdAZ21haWwuY29tAAoJEEl56MO1B/q4UYgH/3CQF495sAS58M3tsy/HCMbq8DUb
9AoIKCdzqvN2xzjYxHHs59jA+MdEIOGbSIx1yWk0KZSqRSfxwd9nGbxO5EHbz6L3
gdZdOHbpZHPmtcUbdOfXDyhy4JaF+EBuRp9FOnsJ+w4/a0lFWMinaic4BweMEESS
y+gD5fcMzzCthedXn/HeQpeYUKOQ8Jpth5K5s4CkeaehEbdRVLFxjwFgQYd8Oeqn
0SfjNMRdBubDxydi4Rx1Ado7mKnfBHoot+9l0PHi6T2Rq89H0AUn/Dj3YOEkW7QT
aKRSVpPJnG3EFHUUzwprODAoQGOC6EpTVpxSqnpO2ewHnnMPhz/IXzRT86w=
=gypc
-----END PGP SIGNATURE-----
Merge tag 'rcu.next.v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux
Pull RCU updates from Boqun Feng:
- Eliminate deadlocks involving do_exit() and RCU tasks, by Paul:
Instead of SRCU read side critical sections, now a percpu list is
used in do_exit() for scaning yet-to-exit tasks
- Fix a deadlock due to the dependency between workqueue and RCU
expedited grace period, reported by Anna-Maria Behnsen and Thomas
Gleixner and fixed by Frederic: Now RCU expedited always uses its own
kthread worker instead of a workqueue
- RCU NOCB updates, code cleanups, unnecessary barrier removals and
minor bug fixes
- Maintain real-time response in rcu_tasks_postscan() and a minor fix
for tasks trace quiescence check
- Misc updates, comments and readibility improvement, boot time
parameter for lazy RCU and rcutorture improvement
- Documentation updates
* tag 'rcu.next.v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux: (34 commits)
rcu-tasks: Maintain real-time response in rcu_tasks_postscan()
rcu-tasks: Eliminate deadlocks involving do_exit() and RCU tasks
rcu-tasks: Maintain lists to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Initialize data to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Initialize callback lists at rcu_init() time
rcu-tasks: Add data to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Repair RCU Tasks Trace quiescence check
rcu/sync: remove un-used rcu_sync_enter_start function
rcutorture: Suppress rtort_pipe_count warnings until after stalls
srcu: Improve comments about acceleration leak
rcu: Provide a boot time parameter to control lazy RCU
rcu: Rename jiffies_till_flush to jiffies_lazy_flush
doc: Update checklist.rst discussion of callback execution
doc: Clarify use of slab constructors and SLAB_TYPESAFE_BY_RCU
context_tracking: Fix kerneldoc headers for __ct_user_{enter,exit}()
doc: Add EARLY flag to early-parsed kernel boot parameters
doc: Add CONFIG_RCU_STRICT_GRACE_PERIOD to checklist.rst
doc: Make checklist.rst note that spinlocks are implied RCU readers
doc: Make whatisRCU.rst note that spinlocks are RCU readers
doc: Spinlocks are implied RCU readers
...
|
||
|
Linus Torvalds
|
1ddeeb2a05 |
for-6.9/block-20240310
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmXuFO4QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpq33D/9hyNyBce2A9iyo026eK8EqLDoed6BPzuvB
kLKj5tsGvX4YlfuswvP86M5dgibTASXclnfUK394TijW/JPOfJ3mNhi9gMnHzRoK
ZaR1di0Lum56dY1FkpMmWiGmE4fB79PAtXYKtajOkuoIcNzylncEAAACUY4/Ouhg
Cm+LMg2prcc+m9g8rKDNQ51pUFg4U21KAUTl35XLMUAaQk1ahW3EDEVYhweC/zwE
V/5hJsv8UY72+oQGY2Dc/YgQk/Zj4ZDh7C+oHR9XeB/ro99kr3/Vopagu0gBMLZi
Rq6qqz6PVMhVcuz8uN2rsTQKXmXhsBn9/adsl4AKtdxcW5D5moWb5BLq1P0WQylc
nzMxa1d6cVcTKZpaUQQv3Rj6ZMrLuDwP277UYHfn5x1oPWYRZCG7FtHuOo1gNcpG
DrSNwVG6BSDcbABqI+MIS2oD1JoUMyevjwT7e2hOXukZhc6GLO5F3ODWE5j3KnCR
S/aGSAmcdR4fTcgavULqWdQVt7SYl4f1IxT8KrUirJGVhc2LgahaWj69ooklVHoU
fPDFRiruwJ5YkH4RWCSDm9mi4kAz6eUf+f4yE06wZOFOb2fT8/1ZK2Snpz2KeXuZ
INO0RejtFzT8L0OUlu7dBmF20y6rgAYt87lR8mIt71yuuATIrVhzlX1VdsvhdrAo
VLHGV1Ncgw==
=WlVL
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
||
Catalin Marinas
|
f1bbc4e9cf |
Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
This reverts commit
|
||
|
Linus Torvalds
|
d2c84bdce2 |
for-6.9/io_uring-20240310
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmXuD/AQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpsojEACNlJKqsebZv24szCR5ViBGqoDi/A5v5vZv 1p7f0sVgpwFLuDu3CCb9IG1tuAiuhBa5yvBKKpyGuGglQd+7Sxqsgdc2Bv/76D7S Ej/fc1x5dxuvAvAetYk4yH2idPhYIBVIx3g2oz44bO4Ur3jFZ/yXzp+JtuKEuTba 7kQmAXfN7c497XDsmSv1eJM/+D/LKjmvjqMX2gnXprw2qPgdAklXcUSnBYaS2JEt o4HGWAImJOV416d7QkOWgKfk6ksJbO3lFzQ6R+JdQCl6KVqc0+5u0oT06ZGVpSUf fQqfcV+cJw41dQB47Qr017ku0EdDI19L3YpL9/WOnNMBM421j1QER1cKiKfiHD2B LCOn+tvunxcGMzYonAFfgSF4XXFJWSK33TpvmmVsU3w0+YSC9oIqFfCxOdHuAJqB tHSuGHgzkufgqhNIQWHiWZEJJUW+MO4Dv2rUV6n+dfCz6JQG48Gs9clDv/tAEY4U 4NzErfYLCsWlNaMPQK1f/b9dWjBXAnpJA4yq8jPyYB3GqjnVuX3Ze14UfwOWgv0B E++qgPsh30ShbP/NRHqS9tNQC2hIy27x/jzpTyKwxuoSs/nyeZg7lFXIPaQQo7wt GZhGzsMasbhoylqblB171NFlxpRetY9aYvHZ3OfUP4xAt1THVOzR6hZrBurOKMv/ e8FBGBh/cg== =Hy// -----END PGP SIGNATURE----- Merge tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Make running of task_work internal loops more fair, and unify how the different methods deal with them (me) - Support for per-ring NAPI. The two minor networking patches are in a shared branch with netdev (Stefan) - Add support for truncate (Tony) - Export SQPOLL utilization stats (Xiaobing) - Multishot fixes (Pavel) - Fix for a race in manipulating the request flags via poll (Pavel) - Cleanup the multishot checking by making it generic, moving it out of opcode handlers (Pavel) - Various tweaks and cleanups (me, Kunwu, Alexander) * tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux: (53 commits) io_uring: Fix sqpoll utilization check racing with dying sqpoll io_uring/net: dedup io_recv_finish req completion io_uring: refactor DEFER_TASKRUN multishot checks io_uring: fix mshot io-wq checks io_uring/net: add io_req_msg_cleanup() helper io_uring/net: simplify msghd->msg_inq checking io_uring/kbuf: rename REQ_F_PARTIAL_IO to REQ_F_BL_NO_RECYCLE io_uring/net: remove dependency on REQ_F_PARTIAL_IO for sr->done_io io_uring/net: correctly handle multishot recvmsg retry setup io_uring/net: clear REQ_F_BL_EMPTY in the multishot retry handler io_uring: fix io_queue_proc modifying req->flags io_uring: fix mshot read defer taskrun cqe posting io_uring/net: fix overflow check in io_recvmsg_mshot_prep() io_uring/net: correct the type of variable io_uring/sqpoll: statistics of the true utilization of sq threads io_uring/net: move recv/recvmsg flags out of retry loop io_uring/kbuf: flag request if buffer pool is empty after buffer pick io_uring/net: improve the usercopy for sendmsg/recvmsg io_uring/net: move receive multishot out of the generic msghdr path io_uring/net: unify how recvmsg and sendmsg copy in the msghdr ... |
||
Brett Creeley
|
6a7e448c6b |
vfio/pds: Refactor/simplify reset logic
The current logic for handling resets is more complicated than it needs to be. The deferred_reset flag is used to indicate a reset is needed and the deferred_reset_state is the requested, post-reset, state. Also, the deferred_reset logic was added to vfio migration drivers to prevent a circular locking dependency with respect to mm_lock and state mutex. This is mainly because of the copy_to/from_user() functions(which takes mm_lock) invoked under state mutex. Remove all of the deferred reset logic and just pass the requested next state to pds_vfio_reset() so it can be used for VMM and DSC initiated resets. This removes the need for pds_vfio_state_mutex_lock(), so remove that and replace its use with a simple mutex_unlock(). Also, remove the reset_mutex as it's no longer needed since the state_mutex can be the driver's primary protector. Suggested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://lore.kernel.org/r/20240308182149.22036-3-brett.creeley@amd.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Brett Creeley
|
457f730825 |
vfio/pds: Make sure migration file isn't accessed after reset
It's possible the migration file is accessed after reset when it has
been cleaned up, especially when it's initiated by the device. This is
because the driver doesn't rip out the filep when cleaning up it only
frees the related page structures and sets its local struct
pds_vfio_lm_file pointer to NULL. This can cause a NULL pointer
dereference, which is shown in the example below during a restore after
a device initiated reset:
BUG: kernel NULL pointer dereference, address: 000000000000000c
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:pds_vfio_get_file_page+0x5d/0xf0 [pds_vfio_pci]
[...]
Call Trace:
<TASK>
pds_vfio_restore_write+0xf6/0x160 [pds_vfio_pci]
vfs_write+0xc9/0x3f0
? __fget_light+0xc9/0x110
ksys_write+0xb5/0xf0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
Add a disabled flag to the driver's struct pds_vfio_lm_file that gets
set during cleanup. Then make sure to check the flag when the migration
file is accessed via its file_operations. By default this flag will be
false as the memory for struct pds_vfio_lm_file is kzalloc'd, which means
the struct pds_vfio_lm_file is enabled and accessible. Also, since the
file_operations and driver's migration file cleanup happen under the
protection of the same pds_vfio_lm_file.lock, using this flag is thread
safe.
Fixes:
|
||
Uwe Kleine-König
|
9b27b117e2 |
vfio/platform: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/79d3df42fe5b359a05b8061631e72e5ed249b234.1709886922.git.u.kleine-koenig@pengutronix.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
Yishai Hadas
|
821b8f6bf8 |
vfio/mlx5: Enforce PRE_COPY support
Enable live migration only once the firmware supports PRE_COPY. PRE_COPY has been supported by the firmware for a long time already [1] and is required to achieve a low downtime upon live migration. This lets us clean up some old code that is not applicable those days while PRE_COPY is fully supported by the firmware. [1] The minimum firmware version that supports PRE_COPY is 28.36.1010, it was released in January 2023. No firmware without PRE_COPY support ever available to users. Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20240306105624.114830-1-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Linus Torvalds
|
0f1a876682 |
vfs-6.9.uuid
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem5LwAKCRCRxhvAZXjc onZsAQCjMNabNWAty2VBAQrNIpGkZ+AMA2DxEajPldaPiJH5zQEA9ea7feB3T47i NUrXXfMQ5DSop+k5Y65pPkEpbX4rhQo= =NZgd -----END PGP SIGNATURE----- Merge tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs uuid updates from Christian Brauner: "This adds two new ioctl()s for getting the filesystem uuid and retrieving the sysfs path based on the path of a mounted filesystem. Getting the filesystem uuid has been implemented in filesystem specific code for a while it's now lifted as a generic ioctl" * tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: xfs: add support for FS_IOC_GETFSSYSFSPATH fs: add FS_IOC_GETFSSYSFSPATH fat: Hook up sb->s_uuid fs: FS_IOC_GETUUID ovl: convert to super_set_uuid() fs: super_set_uuid() |
||
|
Linus Torvalds
|
910202f00a |
vfs-6.9.super
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4DwAKCRCRxhvAZXjc
ooTRAQDRI6Qz6wJym5Yblta8BScMGbt/SgrdgkoCvT6y83MtqwD+Nv/AZQzi3A3l
9NdULtniW1reuCYkc8R7dYM8S+yAwAc=
=Y1qX
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
||
|
Linus Torvalds
|
0c750012e8 |
vfs-6.9.file
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4tQAKCRCRxhvAZXjc ohnfAP4sm946PZfiC4y5Euk96WDC3hC8WCSBar+fpFmYVzeD9wEAy+NVCsjkMElz vqNxwFULUwQjFxxvsM9gvhrgGUud1AE= =UZk/ -----END PGP SIGNATURE----- Merge tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull file locking updates from Christian Brauner: "A few years ago struct file_lock_context was added to allow for separate lists to track different types of file locks instead of using a singly-linked list for all of them. Now leases no longer need to be tracked using struct file_lock. However, a lot of the infrastructure is identical for leases and locks so separating them isn't trivial. This splits a group of fields used by both file locks and leases into a new struct file_lock_core. The new core struct is embedded in struct file_lock. Coccinelle was used to convert a lot of the callers to deal with the move, with the remaining 25% or so converted by hand. Afterwards several internal functions in fs/locks.c are made to work with struct file_lock_core. Ultimately this allows to split struct file_lock into struct file_lock and struct file_lease. The file lease APIs are then converted to take struct file_lease" * tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits) filelock: fix deadlock detection in POSIX locking filelock: always define for_each_file_lock() smb: remove redundant check filelock: don't do security checks on nfsd setlease calls filelock: split leases out of struct file_lock filelock: remove temporary compatibility macros smb/server: adapt to breakup of struct file_lock smb/client: adapt to breakup of struct file_lock ocfs2: adapt to breakup of struct file_lock nfsd: adapt to breakup of struct file_lock nfs: adapt to breakup of struct file_lock lockd: adapt to breakup of struct file_lock fuse: adapt to breakup of struct file_lock gfs2: adapt to breakup of struct file_lock dlm: adapt to breakup of struct file_lock ceph: adapt to breakup of struct file_lock afs: adapt to breakup of struct file_lock 9p: adapt to breakup of struct file_lock filelock: convert seqfile handling to use file_lock_core filelock: convert locks_translate_pid to take file_lock_core ... |
||
|
Linus Torvalds
|
b5683a37c8 |
vfs-6.9.pidfd
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4/wAKCRCRxhvAZXjc
opnBAQCaQWwxjT0VLHebPniw6tel/KYlZ9jH9kBQwLrk1pembwEA+BsCY2C8YS4a
75v9jOPxr+Z8j1SjxwwubcONPyqYXwQ=
=+Wa3
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.pidfd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pdfd updates from Christian Brauner:
- Until now pidfds could only be created for thread-group leaders but
not for threads. There was no technical reason for this. We simply
had no users that needed support for this. Now we do have users that
need support for this.
This introduces a new PIDFD_THREAD flag for pidfd_open(). If that
flag is set pidfd_open() creates a pidfd that refers to a specific
thread.
In addition, we now allow clone() and clone3() to be called with
CLONE_PIDFD | CLONE_THREAD which wasn't possible before.
A pidfd that refers to an individual thread differs from a pidfd that
refers to a thread-group leader:
(1) Pidfds are pollable. A task may poll a pidfd and get notified
when the task has exited.
For thread-group leader pidfds the polling task is woken if the
thread-group is empty. In other words, if the thread-group
leader task exits when there are still threads alive in its
thread-group the polling task will not be woken when the
thread-group leader exits but rather when the last thread in the
thread-group exits.
For thread-specific pidfds the polling task is woken if the
thread exits.
(2) Passing a thread-group leader pidfd to pidfd_send_signal() will
generate thread-group directed signals like kill(2) does.
Passing a thread-specific pidfd to pidfd_send_signal() will
generate thread-specific signals like tgkill(2) does.
The default scope of the signal is thus determined by the type
of the pidfd.
Since use-cases exist where the default scope of the provided
pidfd needs to be overriden the following flags are added to
pidfd_send_signal():
- PIDFD_SIGNAL_THREAD
Send a thread-specific signal.
- PIDFD_SIGNAL_THREAD_GROUP
Send a thread-group directed signal.
- PIDFD_SIGNAL_PROCESS_GROUP
Send a process-group directed signal.
The scope change will only work if the struct pid is actually
used for this scope.
For example, in order to send a thread-group directed signal the
provided pidfd must be used as a thread-group leader and
similarly for PIDFD_SIGNAL_PROCESS_GROUP the struct pid must be
used as a process group leader.
- Move pidfds from the anonymous inode infrastructure to a tiny pseudo
filesystem. This will unblock further work that we weren't able to do
simply because of the very justified limitations of anonymous inodes.
Moving pidfds to a tiny pseudo filesystem allows for statx on pidfds
to become useful for the first time. They can now be compared by
inode number which are unique for the system lifetime.
Instead of stashing struct pid in file->private_data we can now stash
it in inode->i_private. This makes it possible to introduce concepts
that operate on a process once all file descriptors have been closed.
A concrete example is kill-on-last-close. Another side-effect is that
file->private_data is now freed up for per-file options for pidfds.
Now, each struct pid will refer to a different inode but the same
struct pid will refer to the same inode if it's opened multiple
times. In contrast to now where each struct pid refers to the same
inode.
The tiny pseudo filesystem is not visible anywhere in userspace
exactly like e.g., pipefs and sockfs. There's no lookup, there's no
complex inode operations, nothing. Dentries and inodes are always
deleted when the last pidfd is closed.
We allocate a new inode and dentry for each struct pid and we reuse
that inode and dentry for all pidfds that refer to the same struct
pid. The code is entirely optional and fairly small. If it's not
selected we fallback to anonymous inodes. Heavily inspired by nsfs.
The dentry and inode allocation mechanism is moved into generic
infrastructure that is now shared between nsfs and pidfs. The
path_from_stashed() helper must be provided with a stashing location,
an inode number, a mount, and the private data that is supposed to be
used and it will provide a path that can be passed to dentry_open().
The helper will try retrieve an existing dentry from the provided
stashing location. If a valid dentry is found it is reused. If not a
new one is allocated and we try to stash it in the provided location.
If this fails we retry until we either find an existing dentry or the
newly allocated dentry could be stashed. Subsequent openers of the
same namespace or task are then able to reuse it.
- Currently it is only possible to get notified when a task has exited,
i.e., become a zombie and userspace gets notified with EPOLLIN. We
now also support waiting until the task has been reaped, notifying
userspace with EPOLLHUP.
- Ensure that ESRCH is reported for getfd if a task is exiting instead
of the confusing EBADF.
- Various smaller cleanups to pidfd functions.
* tag 'vfs-6.9.pidfd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
libfs: improve path_from_stashed()
libfs: add stashed_dentry_prune()
libfs: improve path_from_stashed() helper
pidfs: convert to path_from_stashed() helper
nsfs: convert to path_from_stashed() helper
libfs: add path_from_stashed()
pidfd: add pidfs
pidfd: move struct pidfd_fops
pidfd: allow to override signal scope in pidfd_send_signal()
pidfd: change pidfd_send_signal() to respect PIDFD_THREAD
signal: fill in si_code in prepare_kill_siginfo()
selftests: add ESRCH tests for pidfd_getfd()
pidfd: getfd should always report ESRCH if a task is exiting
pidfd: clone: allow CLONE_THREAD | CLONE_PIDFD together
pidfd: exit: kill the no longer used thread_group_exited()
pidfd: change do_notify_pidfd() to use __wake_up(poll_to_key(EPOLLIN))
pid: kill the obsolete PIDTYPE_PID code in transfer_pid()
pidfd: kill the no longer needed do_notify_pidfd() in de_thread()
pidfd_poll: report POLLHUP when pid_task() == NULL
pidfd: implement PIDFD_THREAD flag for pidfd_open()
...
|
||
|
Linus Torvalds
|
54126fafea |
vfs-6.9.iomap
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4UQAKCRCRxhvAZXjc ouERAQDg63R9s3bKmUgGqngf9cfr//VCTE+WVARwOUTdn2iDbwEA1IME7X1kL/Vz EdhEjyqO6xom+ao/Vqxe0XIDNz70vgs= =8RdE -----END PGP SIGNATURE----- Merge tag 'vfs-6.9.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull iomap updates from Christian Brauner: - Restore read-write hints in struct bio through the bi_write_hint member for the sake of UFS devices in mobile applications. This can result in up to 40% lower write amplification in UFS devices. The patch series that builds on this will be coming in via the SCSI maintainers (Bart) - Overhaul the iomap writeback code. Afterwards ->map_blocks() is able to map multiple blocks at once as long as they're in the same folio. This reduces CPU usage for buffered write workloads on e.g., xfs on systems with lots of cores (Christoph) - Record processed bytes in iomap_iter() trace event (Kassey) - Extend iomap_writepage_map() trace event after Christoph's ->map_block() changes to map mutliple blocks at once (Zhang) * tag 'vfs-6.9.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits) iomap: Add processed for iomap_iter iomap: add pos and dirty_len into trace_iomap_writepage_map block, fs: Restore the per-bio/request data lifetime fields fs: Propagate write hints to the struct block_device inode fs: Move enum rw_hint into a new header file fs: Split fcntl_rw_hint() fs: Verify write lifetime constants at compile time fs: Fix rw_hint validation iomap: pass the length of the dirty region to ->map_blocks iomap: map multiple blocks at a time iomap: submit ioends immediately iomap: factor out a iomap_writepage_map_block helper iomap: only call mapping_set_error once for each failed bio iomap: don't chain bios iomap: move the iomap_sector sector calculation out of iomap_add_to_ioend iomap: clean up the iomap_alloc_ioend calling convention iomap: move all remaining per-folio logic into iomap_writepage_map iomap: factor out a iomap_writepage_handle_eof helper iomap: move the PF_MEMALLOC check to iomap_writepages iomap: move the io_folios field out of struct iomap_ioend ... |
||
|
Linus Torvalds
|
77417942e4 |
vfs-6.9.ntfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem42QAKCRCRxhvAZXjc
opOtAQDUkiJNaOu3fR6ENLvDZSFmaI2jQXIL8ulHYpEiFrXmKwD9EZQ8bmEYU7uO
WN4VM8p8UwQ7BmIV9b+jvwciF8Qi8QI=
=T03q
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ntfs update from Christian Brauner:
"This removes the old ntfs driver. The new ntfs3 driver is a full
replacement that was merged over two years ago. We've went through
various userspace and either they use ntfs3 or they use the fuse
version of ntfs and thus build neither ntfs nor ntfs3. I think that's
a clear sign that we should risk removing the legacy ntfs driver.
Quoting from Arch Linux and Debian:
- Debian does neither build the legacy ntfs nor the new ntfs3:
"Not currently built with Debian's kernel packages, 'ntfs' has been
symlinked to 'ntfs-3g' as it relates to fstab and mount commands.
Debian kernels are built without support of the ntfs3 driver
developed by Paragon Software." (cf. [2])
- Archlinux provides ntfs3 as their default since 5.15:
"All officially supported kernels with versions 5.15 or newer are
built with CONFIG_NTFS3_FS=m and thus support it. Before 5.15,
NTFS read and write support is provided by the NTFS-3G FUSE file
system." (cf. [1]).
It's unmaintained apart from various odd fixes as well. Worst case we
have to reintroduce it if someone really has a valid dependency on it.
But it's worth trying to see whether we can remove it"
Link: https://wiki.archlinux.org/title/NTFS [1]
Link: https://wiki.debian.org/NTFS [2]
* tag 'vfs-6.9.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: remove NTFS classic from docum. index
fs: Remove NTFS classic
|
||
|
Linus Torvalds
|
7ea65c89d8 |
vfs-6.9.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem3wQAKCRCRxhvAZXjc
otRMAQDeo8qsuuIAcS2KUicKqZR5yMVvrY9r4sQzf7YRcJo5HQD+NQXkKwQuv1VO
OUeScsic/+I+136AgdjWnlEYO5dp0go=
=4WKU
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
||
|
Linus Torvalds
|
97ec9715a8 |
linux_kselftest-kunit-6.9-rc1
This KUnit next update for Linux 6.9-rc1 consists of:
-- fix to make kunit_bus_type const
-- kunit tool change to Print UML command
-- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching
from using a platform_device, to a dedicated bus and device type
used by kunit. kunit devices don't set DMA mask and this caused
regression on some drm tests as they can't allocate DMA buffers.
Fix this problem by setting DMA masks on the kunit device during
initialization.
-- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit
log macros) already use the __printf() gcc attribute to ensure
the format specifiers are valid, but those which could fail the
test, and hence used __kunit_do_failed_assertion() behind the scenes,
did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A 9 patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
-----BEGIN PGP SIGNATURE-----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=ilEb
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- fix to make kunit_bus_type const
- kunit tool change to Print UML command
- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching from
using a platform_device, to a dedicated bus and device type used by
kunit. kunit devices don't set DMA mask and this caused regression on
some drm tests as they can't allocate DMA buffers. Fix this problem
by setting DMA masks on the kunit device during initialization.
- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit log
macros) already use the __printf() gcc attribute to ensure the format
specifiers are valid, but those which could fail the test, and hence
used __kunit_do_failed_assertion() behind the scenes, did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A nine-patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
* tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Annotate _MSG assertion variants with gnu printf specifiers
drm: tests: Fix invalid printf format specifiers in KUnit tests
drm/xe/tests: Fix printf format specifiers in xe_migrate test
net: test: Fix printf format specifier in skb_segment kunit test
rtc: test: Fix invalid format specifier.
time: test: Fix incorrect format specifier
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
lib/cmdline: Fix an invalid format specifier in an assertion msg
kunit: test: Log the correct filter string in executor_test
kunit: Setup DMA masks on the kunit device
kunit: make kunit_bus_type const
kunit: Mark filter* params as rw
kunit: tool: Print UML command
|
||
|
Linus Torvalds
|
d451b075f7 |
linux_kselftest-next-6.9-rc1
This kselftest next update for Linux 6.9-rc1 consists of:
-- livepatch restructuring to move the module out of lib to be
built as a out-of-tree modules during kselftest build. This
change makes it easier change, debug and rebuild the tests by
running make on the selftests/livepatch directory, which is not
currently possible since the modules on lib/livepatch are build
and installed using the main makefile modules target.
-- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
-- resctrl test restructuring and new non-contiguous CBMs CAT test
-- new ktap_helpers to print diagnostic messages, pass/fail tests
based on exit code, abort test, and finish the test.
-- a new test verify power supply properties.
-- a new ftrace to exercise function tracer across cpu hotplug.
-- timeout increase for mqueue test to allow the test to run on
i3.metal AWS instances.
-- minor spelling corrections in several tests.
-- missing gitignore files and changes to existing gitignore files.
-----BEGIN PGP SIGNATURE-----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=G+DO
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
- livepatch restructuring to move the module out of lib to be built as
a out-of-tree modules during kselftest build. This makes it easier
change, debug and rebuild the tests by running make on the
selftests/livepatch directory, which is not currently possible since
the modules on lib/livepatch are build and installed using the main
makefile modules target.
- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
- resctrl test restructuring and new non-contiguous CBMs CAT test
- new ktap_helpers to print diagnostic messages, pass/fail tests based
on exit code, abort test, and finish the test.
- a new test verify power supply properties.
- a new ftrace to exercise function tracer across cpu hotplug.
- timeout increase for mqueue test to allow the test to run on i3.metal
AWS instances.
- minor spelling corrections in several tests.
- missing gitignore files and changes to existing gitignore files.
* tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (57 commits)
kselftest: Add basic test for probing the rust sample modules
selftests: lib.mk: Do not process TEST_GEN_MODS_DIR
selftests: livepatch: Avoid running the tests if kernel-devel is missing
selftests: livepatch: Add initial .gitignore
selftests/resctrl: Add non-contiguous CBMs CAT test
selftests/resctrl: Add resource_info_file_exists()
selftests/resctrl: Split validate_resctrl_feature_request()
selftests/resctrl: Add a helper for the non-contiguous test
selftests/resctrl: Add test groups and name L3 CAT test L3_CAT
selftests: sched: Fix spelling mistake "hiearchy" -> "hierarchy"
selftests/mqueue: Set timeout to 180 seconds
selftests/ftrace: Add test to exercize function tracer across cpu hotplug
selftest: ftrace: fix minor typo in log
selftests: thermal: intel: workload_hint: add missing gitignore
selftests: thermal: intel: power_floor: add missing gitignore
selftests: uevent: add missing gitignore
selftests: Add test to verify power supply properties
selftests: ktap_helpers: Add a helper to finish the test
selftests: ktap_helpers: Add a helper to abort the test
selftests: ktap_helpers: Add helper to pass/fail test based on exit code
...
|
||
Geert Uytterhoeven
|
1828c1c17b |
thermal/drivers/rcar_gen3: Add support for R-Car V4M
Add support for the Thermal Sensor/Chip Internal Voltage Monitor/Core Voltage Monitor (THS/CIVM/CVM) on the Renesas R-Car V4M (R8A779H0) SoC. The conversion formulas for R-Car V4M are the same as for other R-Car Gen4 SoCs. Based on a patch in the BSP by Duy Nguyen. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/bd5b002a802c1e058e0048592f17862db1d04263.1709722342.git.geert+renesas@glider.be |
||
Duy Nguyen
|
6796c1b68f |
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
Document support for the Thermal Sensor/Chip Internal Voltage Monitor/Core Voltage Monitor (THS/CIVM/CVM) on the Renesas R-Car V4M (R8A779H0) SoC. Just like on other R-Car Gen4 SoCs, interrupts are not routed to the INTC-AP (GIC) but to the Error Control Module (ECM). Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/b3d135f8b63b9fe2d0f0aa2e48c8a2211b2e947e.1709722342.git.geert+renesas@glider.be |
||
Konrad Dybcio
|
488164006a |
thermal/of: Assume polling-delay(-passive) 0 when absent
Currently, thermal zones associated with providers that have interrupts for signaling hot/critical trips are required to set a polling-delay of 0 to indicate no polling. This feels a bit backwards. Change the code such that "no polling delay" also means "no polling". Suggested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240125-topic-thermal-v1-2-3c9d4dced138@linaro.org |
||
|
Konrad Dybcio
|
8d5d6abf28 |
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
Currently, thermal zones associated with providers that have interrupts for signaling hot/critical trips are required to set a polling-delay of 0 to indicate no polling. This feels a bit backwards. Assume 0 (no polling) when these properties are not defined. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240125-topic-thermal-v1-1-3c9d4dced138@linaro.org |
||
Peng Fan
|
4d0642074c |
thermal/drivers/qoriq: Fix getting tmu range
TMU Version 1 has 4 TTRCRs, while TMU Version >=2 has 16 TTRCRs.
So limit the len to 4 will report "invalid range data" for i.MX93.
This patch drop the local array with allocated ttrcr array and
able to support larger tmu ranges.
Fixes:
|
||
Mark Brown
|
79d998421d |
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
Currently the sun8i thermal driver will fail to probe if any of the thermal zones it is registering fails to register with the thermal core. Since we currently do not define any trip points for the GPU thermal zones on at least A64 or H5 this means that we have no thermal support on these platforms: [ 1.698703] thermal_sys: Failed to find 'trips' node [ 1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1 even though the main CPU thermal zone on both SoCs is fully configured. This does not seem ideal, while we may not be able to use all the zones it seems better to have those zones which are usable be operational. Instead just carry on registering zones if we get any non-deferral error, allowing use of those zones which are usable. This means that we also need to update the interrupt handler to not attempt to notify the core for events on zones which we have not registered, I didn't see an ability to mask individual interrupts and I would expect that interrupts would still be indicated in the ISR even if they were masked. Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240123-thermal-sun8i-registration-v3-1-3e5771b1bbdd@kernel.org |
||
Martin Botka
|
83620b3b04 |
thermal/drivers/sun8i: Add support for H616 THS controller
Add support for the thermal sensor found in H616 SoCs, is the same as the H6 thermal sensor controller, but with four sensors. Also the registers readings are wrong, unless a bit in the first SYS_CFG register cleared, so set exercise the SRAM regmap to take care of that. Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240219153639.179814-7-andre.przywara@arm.com |