Add default #address-cells and #size-cells properties to the
usb node, which should be suitable for hubs and devices without
explicitly declared interface nodes, as:
"#address-cells":
description: should be 1 for hub nodes with device nodes,
should be 2 for device nodes with interface nodes.
enum: [1, 2]
"#size-cells":
const: 0
-- from Documentation/devicetree/bindings/usb/usb-device.yaml
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add serial1 and serial2 nodes to define the existence of
the MT7621's second and third UARTs.
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reorder serial0 properties according to the guidelines laid
out in Documentation/devicetree/bindings/dts-coding-style.rst
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add missing pinctrl-name and pinctrl-0 properties to declare
that the uart1_pins group is associated with serial0.
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The 4th Gen input preamp gain range is 0dB to +69dB, although the
control values range from 0 to 70. Replace SCARLETT2_MAX_GAIN with
SCARLETT2_MAX_GAIN_VALUE and SCARLETT2_MAX_GAIN_DB, and update the TLV
again.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: a45cf0a083 ("ALSA: scarlett2: Fix Scarlett 4th Gen input gain range")
Message-ID: <Ze7OMA8ntG7KteGa@m.b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jason Xing says:
====================
annotate data-races around sysctl_tcp_wmem[0]
Adding simple READ_ONCE() can avoid reading the sysctl knob meanwhile
someone is trying to change it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When reading wmem[0], it could be changed concurrently without
READ_ONCE() protection. So add one annotation here.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's possible that writer and the reader can manipulate the same
sysctl knob concurrently. Using READ_ONCE() to prevent reading
an old value.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Running the page-pool sample on production machines under moderate
networking load shows recycling rate higher than 100%:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.3% (alloc: 1392:2290247724 recycle: 469289484:1828235386)
Note that outstanding refs (89088) == slow alloc * cache size (1392 * 64)
which means this machine is recycling page pool pages perfectly, not
a single page has been released.
The extra 0.3% is because sample ignores allocations from the ptr_ring.
Treat those the same as alloc_fast, the ring vs cache alloc is
already captured accurately enough by recycling stats.
With the fix:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.0% (alloc: 1392:2331141604 recycle: 473625579:1857460661)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The seg-led-gpio driver uses symbols from the linedisp namespace. Ensure
these are imported.
Fixes: 899383f9ec ("auxdisplay: Add 7-segment LED display driver")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Closes: https://lore.kernel.org/r/202403100401.IDre04gu-lkp@intel.com/
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
After commits ca065d0cf8 ("udp: no longer use SLAB_DESTROY_BY_RCU")
and 7ae215d23c ("bpf: Don't refcount LISTEN sockets in sk_assign()")
UDP early demux no longer need to grab a refcount on the UDP socket.
This save two atomic operations per incoming packet for connected
sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Joe Stringer <joe@wand.net.nz>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gavrilov Ilia says:
====================
fix incorrect parameter validation in the *_get_sockopt() functions
This v2 series fix incorrent parameter validation in *_get_sockopt()
functions in several places.
version 2 changes:
- reword the patch description
- add two patches for net/kcm and net/x25
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 3557baabf2 ("[L2TP]: PPP over L2TP driver core")
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'olr' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'olr' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herve Codina says:
====================
Add support for QMC HDLC
This series introduces the QMC HDLC support.
Patches were previously sent as part of a full feature series and were
previously reviewed in that context:
"Add support for QMC HDLC, framer infrastructure and PEF2256 framer" [1]
In order to ease the merge, the full feature series has been split and
needed parts were merged in v6.8-rc1:
- "Prepare the PowerQUICC QMC and TSA for the HDLC QMC driver" [2]
- "Add support for framer infrastructure and PEF2256 framer" [3]
This series contains patches related to the QMC HDLC part (QMC HDLC
driver):
- Introduce the QMC HDLC driver (patches 1 and 2)
- Add timeslots change support in QMC HDLC (patch 3)
- Add framer support as a framer consumer in QMC HDLC (patch 4)
Compare to the original full feature series, a modification was done on
patch 3 in order to use a coherent prefix in the commit title.
I kept the patches unsquashed as they were previously sent and reviewed.
Of course, I can squash them if needed.
Compared to the previous iteration:
https://lore.kernel.org/linux-kernel/20240306080726.167338-1-herve.codina@bootlin.com/
this v7 series mainly:
- Rename a variable.
- Fix reverse xmas tree declarations.
- Add 'Acked-by' tag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add framer support in the fsl_qmc_hdlc driver in order to be able to
signal carrier changes to the network stack based on the framer status
Also use this framer to provide information related to the E1/T1 line
interface on IF_GET_IFACE and configure the line interface according to
IF_IFACE_{E1,T1} information.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QMC channels support runtime timeslots changes but nothing is done at
the QMC HDLC driver to handle these changes.
Use existing IFACE ioctl in order to configure the timeslots to use.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These helpers scatters or gathers a bitmap with the help of the mask
position bits parameter.
bitmap_scatter() does the following:
src: 0000000001011010
||||||
+------+|||||
| +----+||||
| |+----+|||
| || +-+||
| || | ||
mask: ...v..vv...v..vv
...0..11...0..10
dst: 0000001100000010
and bitmap_gather() performs this one:
mask: ...v..vv...v..vv
src: 0000001100000010
^ ^^ ^ 0
| || | 10
| || > 010
| |+--> 1010
| +--> 11010
+----> 011010
dst: 0000000000011010
bitmap_gather() can the seen as the reverse bitmap_scatter() operation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230926052007.3917389-3-andriy.shevchenko@linux.intel.com/
Co-developed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After contributing the driver, add myself as the maintainer for the
Freescale QMC HDLC driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QMC HDLC driver provides support for HDLC using the QMC (QUICC
Multichannel Controller) to transfer the HDLC data.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
ethtool: ice: Support for RSS settings to GTP
Takeru Hayasaka enables RSS functionality for GTP packets on ice driver
with ethtool.
A user can include TEID and make RSS work for GTP-U over IPv4 by doing the
following:`ethtool -N ens3 rx-flow-hash gtpu4 sde`
In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e,
gtpu(4|6)u, and gtpu(4|6)d.
gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does
not include a TEID.
gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that
includes a TEID.
gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios.
gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6.
gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended
header includes Uplink, applicable to both IPv4 and IPv6.
gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink,
for both IPv4 and IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4a5838ad9d ("kbuild: Add extra gcc checks") added the
-Wpacked-bitfield-compat flag, but there is no need to add it
explicitly.
GCC manual says:
"This warning is enabled by default. Use -Wno-packed-bitfield-compat
to disable this warning."
The test code in the manual:
struct foo
{
char a:4;
char b:8;
} __attribute__ ((packed));
... emits "note: offset of packed bit-field ‘b’ has changed in GCC 4.4"
without W=3.
Let's remove it, as it is a default with GCC.
Clang does not support this flag, so its removal will not affect Clang
builds.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The input gain range TLV was declared as -70dB to 0dB, but the preamp
gain range is actually 0dB to +70dB. Rename SCARLETT2_GAIN_BIAS to
SCARLETT2_MAX_GAIN and update the TLV to fix.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 0a995e38dc ("ALSA: scarlett2: Add support for software-controllable input gain")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <9168317b5ac5335943d3f14dbcd1cc2d9b2299d0.1710047969.git.g@b4.vu>
The meanings of the raw_auto_gain_status values were originally
guessed through experimentation, but the official names have now been
discovered. Update the autogain status control strings accordingly.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 0a995e38dc ("ALSA: scarlett2: Add support for software-controllable input gain")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <8bd12a5e7dc714801dd9887c4bc5cb35c384e27c.1710047969.git.g@b4.vu>
The value currently being read to determine the low-voltage state is
actually the front panel state. Fix the code to use the correct offset
for the low-voltage state.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: d7cfa2fdfc ("ALSA: scarlett2: Add power status control")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <d97b7d87f43b0e54f37e1552394be2f3ae182704.1710047969.git.g@b4.vu>
After system_resume the amplifers will remain off, even if they were on
before system_suspend.
Use playback_started bool to save the playback state, and restore power
state based on it.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <1742b61901781826f6e6212ffe1d21af542d134a.1709918447.git.soyer@irl.hu>
The runtime_resume function calls prmg_load and apply_calibration
functions, but system_resume also calls them, so calling
pm_runtime_force_resume before reset is unnecessary.
For consistency, do not call the pm_runtime_force_suspend in
system_suspend, as runtime_suspend does the same.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <d0b4cc1248b9d375d59c009563da42d60d69eac3.1709918447.git.soyer@irl.hu>
The amplifier doesn't loose register state in software shutdown mode, so
there is no need to reset the cur_* values.
Without these resets, the amplifier can be turned on after
runtime_suspend without waiting for the program and
profile to be restored.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <aa27ae084150988bf6a0ead7e3403bc485d790f8.1709918447.git.soyer@irl.hu>
The system_resume function uses dev_info for tracing, but the other pm
functions use dev_dbg.
Use dev_dbg as the other pm functions.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <140f3c689c9eb5874e6eb48a570fcd8207f06a41.1709918447.git.soyer@irl.hu>
Realtek codec on HP Envy laptop series are heavily modified by vendor.
Therefore, need intervention to make it work properly. The patch fixes:
- B&O soundbar speakers (between lid and keyboard) activation
- Enable LED on mute button
- Add missing process coefficient which affects the output amplifier
- Volume control synchronization between B&O soundbar and side speakers
- Unmute headset output on several HP Envy models
- Auto-enable headset mic when plugged
This patch was tested on HP Envy x360 13-AR0107AU with Realtek ALC285
The only unsolved problem is output amplifier of all built-in speakers
is too weak, which causes volume of built-in speakers cannot be loud
as vendor's proprietary driver due to missing _DSD parameter in the
firmware. The solution is currently on research. Expected to has another
patch in the future.
Potential fix to related issues, need test before close those issues:
- https://bugzilla.kernel.org/show_bug.cgi?id=189331
- https://bugzilla.kernel.org/show_bug.cgi?id=216632
- https://bugzilla.kernel.org/show_bug.cgi?id=216311
- https://bugzilla.kernel.org/show_bug.cgi?id=213507
Signed-off-by: Athaariq Ardhiansyah <foss@athaariq.my.id>
Message-ID: <20240310140249.3695-1-foss@athaariq.my.id>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Starfive:
The previous cleanup broke boot on the jh7100 as the driver depended on
the fallback clock name created based on the node-name when
clock-output-names is not present. Add clock-output-names to restore
working order.
Generic:
BUILTIN_DTB has been broken for ages on any platform other than the
nommu Canaan k210 SoC as the first dtb built (in alphanumerical order),
would get built into the image. This didn't get fixed for ages because
nobody actually cared about running it other than the k210 enough to
fix it. The folks doing Sophgo SG2042 development have come along and
fixed it, as they want to use builtin dtbs. linux-boot on that platform
reuses the dtb it was provided by OpenSBI when booting linux proper,
which is unfortunately not possible to boot a mainline kernel with.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZeiwSAAKCRB4tDGHoIJi
0i35AP9Nm72QRsmcW1EaICAQDkfPyPVdpHp1WkHIDyNHcjPkrgEAtPy4Mlz9LIhx
pQ5QuXV2mqkjE+Ts5k0efkL1Am8MZgs=
=zUP6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ad6q
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetree fixes for v6.8-final
Starfive:
The previous cleanup broke boot on the jh7100 as the driver depended on
the fallback clock name created based on the node-name when
clock-output-names is not present. Add clock-output-names to restore
working order.
Generic:
BUILTIN_DTB has been broken for ages on any platform other than the
nommu Canaan k210 SoC as the first dtb built (in alphanumerical order),
would get built into the image. This didn't get fixed for ages because
nobody actually cared about running it other than the k210 enough to
fix it. The folks doing Sophgo SG2042 development have come along and
fixed it, as they want to use builtin dtbs. linux-boot on that platform
reuses the dtb it was provided by OpenSBI when booting linux proper,
which is unfortunately not possible to boot a mainline kernel with.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
Link: https://lore.kernel.org/r/20240306-waltz-facial-9e4e1b792053@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following:
- Rafal defines a proper NVMEM layout for the Asus GT-AC5300 router and
removes some invalid Device Tree properties pertaining to the
Ethernet switch on bcm4908
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmXoxeUACgkQh9CWnEQH
BwQPCg//a7hqzeMpeZEjev6ZDi3h3lgcRjFs6RnCuHwmF195RGu9J52RuDkoKWjX
foI8bSePF79n7EbB5CCi5G5WczrDZ0x0Ygda9FApHiKitzyfhQ0v5f+MFcJmpYNf
cRTd6KBjBVyCsi8fyxEArVFT5CGDxyMQq9rMkVkX1I/L5oFNEsR18Cw9mYWARJOV
zoIXrN5QW6QSmJJpNyrKPet6HA2nt7jyxSFSopbiSd7ADW1euaUh0h8ggXZKJq/p
IdW6lFiJzgg+1KkooL8cxxPi1P/hz3uMKXzmdHoeQR0NJ6MNu2CIKsxGMK5RPicG
D/S0Yh3LWsgu3UgcJwwhIrPeszo8qK1i7HgKQ1wNFzFZzyi7nL0QgCJn1WxdRBa/
ripIcOcKJTgf5PvZYQ03kGJx/hHhTXEif55SENZD9FSVC6oV4wQPEBj0sghTknSw
oYgroZeuiBM4tmX2rQDAy1X3jVGMZSiPwuhgB4Q0phN8Exo72aUL0PrwWpPU9zRt
xppc5l4jpsM9MP/1snDbB50+GiFlofb4ISAxXwi7GMjiir7zpnsyvrK31/EOUTxt
euZ9xJCezeMOkL8NBwpOFKvmVZGhxtqSE+JONdEG8BI072iFdVYqVuululTZZ5WM
lRftEkO6A6pr1t0lWfCeNbYVlZRmVfYnUQbXMob5YVyOXuD71t8=
=KB40
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=UDMX
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.9/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/late
This pull request contains Broadcom ARM64-based SoCs changes for 6.9,
please pull the following:
- Rafal defines a proper NVMEM layout for the Asus GT-AC5300 router and
removes some invalid Device Tree properties pertaining to the
Ethernet switch on bcm4908
* tag 'arm-soc/for-6.9/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells
arm64: dts: broadcom: bcmbca: bcm4908: use NVMEM layout for Asus GT-AC5300
Link: https://lore.kernel.org/r/20240307200441.2151734-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Let's extend the dev_pm_opp_data with a turbo variable, to allow users to
specify if it's a boost frequency for a dynamically added OPP.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If the kernel isn't built with interconnect support, icc_get_name()
returns NULL and we get following warning:
drivers/opp/debugfs.c: In function 'bw_name_read':
drivers/opp/debugfs.c:43:42: error: '%.62s' directive argument is null [-Werror=format-overflow=]
i = scnprintf(buf, sizeof(buf), "%.62s\n", icc_get_name(path));
Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/
Fixes: 0430b1d570 ("opp: Expose bandwidth information via debugfs")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
We currently get the following warning:
debugfs.c:105:54: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
snprintf(name, sizeof(name), "supply-%d", i);
^~
debugfs.c:105:46: note: directive argument in the range [-2147483644, 2147483646]
snprintf(name, sizeof(name), "supply-%d", i);
^~~~~~~~~~~
debugfs.c:105:17: note: 'snprintf' output between 9 and 19 bytes into a destination of size 15
snprintf(name, sizeof(name), "supply-%d", i);
Fix this and other potential issues it by allocating larger arrays.
Use the exact string format to allocate the arrays without getting into
these issues again.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Move the declaration of functions defined in the OPP core to pm_opp.h.
These were added to cpufreq.h as it was the only user of the APIs, but
that was a mistake perhaps. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
> drivers/firewire/core-device.c:326:8-16: WARNING: please use sysfs_emit or sysfs_emit_at
No functional change intended
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240122053942.80648-2-lizhijian@fujitsu.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Per Documentation/filesystems/sysfs.rst:
> sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
> method.
So we can kill the unnecessary buf check safely.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240122053942.80648-1-lizhijian@fujitsu.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
