With the removal of the ARCH_NR_GPIOS, the number of available GPIOs
is effectively unlimited, causing the gpio-mockup module load failure
test that overflowed the number of GPIOs to unexpectedly succeed, and
so fail.
The test is no longer relevant so remove it.
Promote the "no lines defined" test so there is still one load
failure test in the basic set.
Fixes: 7b61212f2a ("gpiolib: Get rid of ARCH_NR_GPIOS")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: https://lore.kernel.org/linux-gpio/ZC6OHBjdwBdT4sSb@xpf.sh.intel.com/
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Only some minor cleanup in ath11k and ath12k. Adding Jeff as the
maintainer for ath10k, ath11k and ath12k DT bindings.
-----BEGIN PGP SIGNATURE-----
iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXnWpcXHHF1aWNfa3Zh
bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZvJIQf+M5wX6AR9MlPNO+pyOe+PDI6z
WW+TKkkHfMyMBq7XwsdQK1rwJQTZazf0ltHJ0iUJPz4a4On48i7Nt0Q2YXGXFvYF
B5OOXxeItJ4KIb0PaYl6WvlZhsUwV7splq9kCbrO5jpQichJoCeizoDUvPIcGFzu
ShhHoi+J2t9SCd07dGAU1iYVk4+oRfhgtK3bwXOtLaBJFGlLWEKI7cwFIdIe8h6U
gWBJeWMYLqyHQrGXbYjfWsh5BtRIodMBGlDDQ/fhYvs56Knvb3EEIYac+X9V//mq
bqJu294tnUL2wmG6xnWCeEz19zlCUnxhrnv44qfi+IPIelNsT06/6o1rKDB2Kw==
=hsOg
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.9
Only some minor cleanup in ath11k and ath12k. Adding Jeff as the
maintainer for ath10k, ath11k and ath12k DT bindings.
Now WoWLAN firmware will disable PCIE DMA after driver call cfg_wake
function, and it will lead to release offload packet fail because driver
can't receive completion notification from firmware. We move release
offload packet earlier to avoid this error.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-8-pkshih@realtek.com
The security engine is set for management frames by default for 802.11be
chips, so no need to set it in WoWLAN flow.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-7-pkshih@realtek.com
The setting during suspend or resume is different between different
generation, so update it.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-6-pkshih@realtek.com
The registers to configure mac function for WoWLAN mode that are different
from different generation, so update them.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-5-pkshih@realtek.com
The register of control and polling function for TX/RX DMA is different
from different generation, so update them. Also rename polling_dma
function to polling_dma_idle to avoid misunderstanding.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-4-pkshih@realtek.com
The statue register is for driver to check if WoWLAN mode works or stops
successfully. It is changed for new generation, so update it.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-3-pkshih@realtek.com
The WoWLAN reason register is used for driver to get the wakeup reason
for reporting to cfg80211, and it is different from chips. So put it
into chip information.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-2-pkshih@realtek.com
The kzalloc() in brcmf_pmksa_v3_op() will return null if the
physical memory has run out. As a result, if we dereference
the null value, the null pointer dereference bug will happen.
Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails
for pmk_op.
Fixes: a96202acae ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations")
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229103153.18533-1-duoming@zju.edu.cn
The 2 Bluetooth profiles (Hands free profile & Human interface device)
have high duty transmission, it will affect the traffic of WiFi packet
frequently. And once the WiFi traffic down to B/G mode, it will need
a better success rate to recover the transmission rate. Add new policy
option to solve the above situation.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-9-pkshih@realtek.com
If Bluetooth is working, it will update their info regularly. And the code
will increase the counters while the info updating. Use this counter to
judge is Bluetooth working or not. Don't need to set Bluetooth power or
gain when it is not working.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-8-pkshih@realtek.com
Add return value to H2C function, and only record down the value while
H2C command success, this can help us to check the real time status.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-7-pkshih@realtek.com
Wi-Fi firmware need some driver information to do decision or do some
real-time control. Driver will update these information by H2C command.
The chip 8922a H2C command index is different from before chips/branch,
so need to assign the correct index to let firmware parsing.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-6-pkshih@realtek.com
Change structure member from bit field to normal variable to
reduce unnecessary translation.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-5-pkshih@realtek.com
To avoid using bit fields for H2C command, rearrange the structure.
And also patch the corresponding code for the using of this structure.
No logic changes for existing chips.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-4-pkshih@realtek.com
Under some circumstances, coexistence mechanism want to keep grant BT or
WiFi, such as inquiry and WiFi is connecting, to ensure BT or WiFi can
transmit or receive data in that period.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-3-pkshih@realtek.com
When hardware grant BT initially but transition to grant WiFi, the PLT
(polluted) bit is set to assist coexistence mechanism to debug if
grant signal is expected.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-2-pkshih@realtek.com
The code here looks well thought-out, so it seems likely
that the byte-swaps are actually needed, due to SPI bus
and device behaviour. Restore the byte-swapping, in a way
that doesn't result in sparse warnings.
Fixes: 7ceade6534 ("wifi: cw1200: fix __le16 sparse warnings")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240228121156.62f820aa6dfb.Ia63314e4d0ed1ee76f100846d68f0722abf6b793@changeid
When these failures happen, the warning and call trace is printed which is
excessive. Instead, just print the error but rate limited to prevent warns
to unnecessarily pollute the kernel log buffer and make the serial console
practically unusable.
For example, on an AM625 BeaglePlay board where accessing a SDIO WiFi chip
fails with an -110 (ETIMEDOUT) error:
$ dmesg | grep "sdio write\|read failed (-110)" | wc -l
39
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240228101042.728881-1-javierm@redhat.com
PCI drivers and USB drivers can both use the same function,
read_efuse_byte(), and they can call it directly.
rtl8192de was the only user.
Tested only with the upcoming rtl8192du driver.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/4e2c968d-f25c-4a40-be97-4fdcbdde69cf@gmail.com
Commit 5459c0b704 ("PCI/DPC: Quirk PIO log size for certain Intel Root
Ports") and commit 3b8803494a ("PCI/DPC: Quirk PIO log size for Intel Ice
Lake Root Ports") add quirks for Ice, Tiger and Alder Lake Root Ports.
System firmware for Raptor Lake still has the bug, so Linux logs the
warning below on several Raptor Lake systems like Dell Precision 3581 with
Intel Raptor Lake processor (0W18NX) system firmware/BIOS version 1.10.1.
pci 0000:00:07.0: [8086:a76e] type 01 class 0x060400
pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid
pci 0000:00:07.1: [8086:a73f] type 01 class 0x060400
pci 0000:00:07.1: DPC: RP PIO log size 0 is invalid
Apply the quirk for Raptor Lake Root Ports as well.
This also enables the DPC driver to dump the RP PIO Log registers when DPC
is triggered.
Link: https://lore.kernel.org/r/20240305113057.56468-1-pmenzel@molgen.mpg.de
Reported-by: Niels van Aert <nvaert1986@hotmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218560
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Niels van Aert <nvaert1986@hotmail.com>
This test is userspace code, but uses some kernel headers via symlinks,
and mocks other headers, in order to test load_unaligned_zeropad().
Currently the test fails to build with:
In file included from load_unaligned_zeropad.c:26:
word-at-a-time.h:7:10: fatal error: linux/bitops.h: No such file or directory
7 | #include <linux/bitops.h>
This is due to the recent changes to the kernel headers.
Fix it by symlinking the new wordpart.h, and creating an empty stub for
bitops.h which is all that's needed.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 66a5c40f60 ("kernel.h: removed REPEAT_BYTE from kernel.h")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20240305125644.3315910-1-mpe@ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
There is no need to repeat for-loop twice in the error path in
gpiochip_add_data_with_key(). Deduplicate it. While at it,
rename loop variable to be more specific and avoid ambguity.
It also properly unwinds the SRCU, i.e. in reversed order of allocating.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
A race condition between the .runtime_idle() callback and the .remove()
callback in the rtsx_pcr PCI driver leads to a kernel crash due to an
unhandled page fault [1].
The problem is that rtsx_pci_runtime_idle() is not expected to be running
after pm_runtime_get_sync() has been called, but the latter doesn't really
guarantee that. It only guarantees that the suspend and resume callbacks
will not be running when it returns.
However, if a .runtime_idle() callback is already running when
pm_runtime_get_sync() is called, the latter will notice that the runtime PM
status of the device is RPM_ACTIVE and it will return right away without
waiting for the former to complete. In fact, it cannot wait for
.runtime_idle() to complete because it may be called from that callback (it
arguably does not make much sense to do that, but it is not strictly
prohibited).
Thus in general, whoever is providing a .runtime_idle() callback needs
to protect it from running in parallel with whatever code runs after
pm_runtime_get_sync(). [Note that .runtime_idle() will not start after
pm_runtime_get_sync() has returned, but it may continue running then if it
has started earlier.]
One way to address that race condition is to call pm_runtime_barrier()
after pm_runtime_get_sync() (not before it, because a nonzero value of the
runtime PM usage counter is necessary to prevent runtime PM callbacks from
being invoked) to wait for the .runtime_idle() callback to complete should
it be running at that point. A suitable place for doing that is in
pci_device_remove() which calls pm_runtime_get_sync() before removing the
driver, so it may as well call pm_runtime_barrier() subsequently, which
will prevent the race in question from occurring, not just in the rtsx_pcr
driver, but in any PCI drivers providing .runtime_idle() callbacks.
Link: https://lore.kernel.org/lkml/20240229062201.49500-1-kai.heng.feng@canonical.com/ # [1]
Link: https://lore.kernel.org/r/5761426.DvuYhMxLoT@kreacher
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ricky Wu <ricky_wu@realtek.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Refactoring of the field get conversion introduced a regression in the
legacy Wake On Lan from a magic packet with i219 devices. Rx address
copied not correctly from MAC to PHY with FIELD_GET macro.
Fixes: b9a4525450 ("intel: legacy: field get conversion")
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit f061c9f7d0 ("Documentation: Document each netlink family")
added recipes for YAML -> RST conversion.
Then commit 7da8bdbf8f ("docs: Makefile: Fix make cleandocs by
deleting generated .rst files") made sure those converted .rst files
are cleaned by "make cleandocs".
However, they took care of htmldocs build only.
If one of other targets such as latexdocs or epubdocs is built
without building htmldocs, missing .rst files can cause additional
WARNINGs from sphinx-build as follow:
./Documentation/userspace-api/netlink/specs.rst:18: WARNING: undefined label: 'specs'
./Documentation/userspace-api/netlink/netlink-raw.rst:64: WARNING: unknown document: '../../networking/netlink_spec/rt_link'
./Documentation/userspace-api/netlink/netlink-raw.rst:64: WARNING: unknown document: '../../networking/netlink_spec/tc'
./Documentation/userspace-api/netlink/index.rst:21: WARNING: undefined label: 'specs'
Add dependency to $(YNL_INDEX) for other targets and allow any targets
to be built cleanly right after "make cleandocs".
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: stable@vger.kernel.org # v6.7
Cc: Thorsten Blum <thorsten.blum@toblux.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Reviwed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <e876e3c8-109d-4bc8-9916-05a4bc4ee9ac@gmail.com>
dtschema defines label as string, so $ref in other bindings is
redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240226122934.89257-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.
However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.
In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.
There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
transmitted and release them inside igc_xdp_xmit.
While it might work technically, it is not what
the return value is meant to represent (i.e. the
number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
support non-consecutively dropped packets.
Besides being complex, it likely has a negative
performance impact without a significant gain
since it is anyway unlikely that the next frame
can be transmitted if the previous one was dropped.
The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds. It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.
#!/bin/bash
INTERFACE=enp4s0
INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`
sudo ip link add dev veth1 type veth peer name veth2
sudo ip link set up $INTERFACE
sudo ip link set up veth1
sudo ip link set up veth2
cat << EOF > redirect.bpf.c
SEC("prog")
int redirect(struct xdp_md *ctx)
{
return bpf_redirect($INTERFACE_IDX, 0);
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
sudo ip link set veth2 xdp obj redirect.bpf.o
cat << EOF > pass.bpf.c
SEC("prog")
int pass(struct xdp_md *ctx)
{
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
sudo ip link set $INTERFACE xdp obj pass.bpf.o
cat << EOF > trafgen.cfg
{
/* Ethernet Header */
0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 1, 1, # IP Src - adapt as needed
10, 0, 1, 2, # IP Dest - adapt as needed
const16(6666), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
EOF
sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp
Fixes: 4ff3203610 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Helper i40e_is_fw_ver_eq() compares incorrectly given firmware version
as it returns true when the major version of running firmware is
greater than the given major version that is wrong and results in
failure during getting of DCB configuration where this helper is used.
Fix the check and return true only if the running FW version is exactly
equals to the given version.
Reproducer:
1. Load i40e driver
2. Check dmesg output
[root@host ~]# modprobe i40e
[root@host ~]# dmesg | grep 'i40e.*DCB'
[ 74.750642] i40e 0000:02:00.0: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[ 74.759770] i40e 0000:02:00.0: DCB init failed -5, disabled
[ 74.966550] i40e 0000:02:00.1: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[ 74.975683] i40e 0000:02:00.1: DCB init failed -5, disabled
Fixes: cf488e1322 ("i40e: Add other helpers to check version of running firmware and AQ API")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix an obviously incorrect assignment, created with a typo or cut-n-paste
error.
Fixes: 5995ef88e3 ("ice: realloc VSI stats arrays")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The function ice_bridge_setlink() may encounter a NULL pointer dereference
if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently
in nla_for_each_nested(). To address this issue, add a check to ensure that
br_spec is not NULL before proceeding with the nested attribute iteration.
Fixes: b1edc14a3f ("ice: Implement ice_bridge_getlink and ice_bridge_setlink")
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E800 series hardware uses the same iAVF driver as older devices,
including the virtchnl negotiation scheme.
This negotiation scheme includes a mechanism to determine what type of RSS
should be supported, including RSS over PF virtchnl messages, RSS over
firmware AdminQ messages, and RSS via direct register access.
The PF driver will always prefer VIRTCHNL_VF_OFFLOAD_RSS_PF if its
supported by the VF driver. However, if an older VF driver is loaded, it
may request only VIRTCHNL_VF_OFFLOAD_RSS_REG or VIRTCHNL_VF_OFFLOAD_RSS_AQ.
The ice driver happily agrees to support these methods. Unfortunately, the
underlying hardware does not support these mechanisms. The E800 series VFs
don't have the appropriate registers for RSS_REG. The mailbox queue used by
VFs for VF to PF communication blocks messages which do not have the
VF-to-PF opcode.
Stop lying to the VF that it could support RSS over AdminQ or registers, as
these interfaces do not work when the hardware is operating on an E800
series device.
In practice this is unlikely to be hit by any normal user. The iAVF driver
has supported RSS over PF virtchnl commands since 2016, and always defaults
to using RSS_PF if possible.
In principle, nothing actually stops the existing VF from attempting to
access the registers or send an AQ command. However a properly coded VF
will check the capability flags and will report a more useful error if it
detects a case where the driver does not support the RSS offloads that it
does.
Fixes: 1071a8358a ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Alan Brady <alan.brady@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix softirq's not being handled during napi_schedule() call when
receiving marker packets for queue disable by disabling local bottom
half.
The issue can be seen on ifdown:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
Using ftrace to catch the failing scenario:
ifconfig [003] d.... 22739.830624: softirq_raise: vec=3 [action=NET_RX]
<idle>-0 [003] ..s.. 22739.831357: softirq_entry: vec=3 [action=NET_RX]
No interrupt and CPU is idle.
After the patch when disabling local BH before calling napi_schedule:
ifconfig [003] d.... 22993.928336: softirq_raise: vec=3 [action=NET_RX]
ifconfig [003] ..s1. 22993.928337: softirq_entry: vec=3 [action=NET_RX]
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
total_fa_cnt is supposed to include cck_fa_cnt and ofdm_fa_cnt, not just
ofdm_fa_cnt.
Fixes: 960361238b ("rtw88: 8821c: add false alarm statistics")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/f3cb6d17-e4e4-44a7-9c9b-72aed994b5c9@gmail.com
Tenda U9 V2.0, which contains RTL8811CU, is practically unusable because
of frequent disconnections:
Feb 23 14:46:45 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:46:46 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
Feb 23 14:46:52 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED
- Connection to 90:55:de:__:__:__ completed [id=0 id_str=]
Feb 23 14:46:54 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:46:55 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
Feb 23 14:47:01 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED
- Connection to 90:55:de:__:__:__ completed [id=0 id_str=]
Feb 23 14:47:04 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:47:05 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
This is caused by a mistake in the chip initialisation. This version of
the chip requires loading an extra AGC table right after the main one,
but the extra table is being loaded at the wrong time, in
rtw_chip_board_info_setup().
Move the extra AGC table loading to the right place, in
rtw_phy_load_tables().
The rtw_chip_board_info_setup() can only do "software" things, and
rtw_phy_load_tables() can really do IO.
Fixes: 5d6651fe85 ("rtw88: 8821c: support RFE type2 wifi NIC")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/276c31d8-b9a8-4e54-a3ac-09b74657aff7@gmail.com
Clear bit 8 of REG_SYS_STATUS1 after MAC power on.
Without this, some RTL8821CU and RTL8811CU cannot connect to any
network:
Feb 19 13:33:11 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 1/3)
Feb 19 13:33:13 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 2/3)
Feb 19 13:33:14 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 3/3)
Feb 19 13:33:15 ideapad2 kernel: wlp3s0f3u2: authentication with
90:55:de:__:__:__ timed out
The RTL8822CU and RTL8822BU out-of-tree drivers do this as well, so do
it for all three types of chips.
Tested with RTL8811CU (Tenda U9 V2.0).
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/aeeefad9-27c8-4506-a510-ef9a9a8731a4@gmail.com
RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after
reading and writing certain addresses.
Without this, the firmware upload fails approximately more than 50% of
the time.
Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU
but without Bluetooth.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@gmail.com
Add VID/PIDs that are known to be missing for this driver.
Removed /* 8811CU */ and /* 8821CU */ as they are redundant
since the file is specific to those chips.
Removed /* TOTOLINK A650UA v3 */ as the manufacturer. It has a REALTEK
VID so it may not be specific to this adapter.
Verified and tested.
Cc: stable@vger.kernel.org
Signed-off-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/4ume7mjw63u7.XlMUvUuacW2ErhOCdqlLkw2@1EHFQ.trk.elasticemail.com
HDMI Audio has been added to the DT binding documentation with an
incorrect index. DT and the driver use index 26. This happened,
because the binding is missing MULTI_SAI type, which is using
index 25.
Reported-by: Michael Yackavage <michaely@ips-yes.com>
Fixes: 7bdbd87d40 ("dt-bindings: fsl-imx-sdma: Convert imx sdma to DT schema")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240226212740.2019837-6-sre@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add compatibles used by different i.MX6 variants to the i.MX IOMUX
Controller GPR binding.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240226212740.2019837-5-sre@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Ido Schimmel says:
====================
selftests: forwarding: Various improvements
This patchset speeds up the multipath tests (patches #1-#2) and makes
other tests more stable (patches #3-#6) so that they will not randomly
fail in the netdev CI.
On my system, after applying the first two patches, the run time of
gre_multipath_nh_res.sh is reduced by over 90%.
====================
Link: https://lore.kernel.org/r/20240304095612.462900-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests generate various IPv6 flows, encapsulate them in GRE packets
and check that the encapsulated packets are distributed between the
available nexthops according to the configured weights.
Unlike the corresponding IPv4 tests, these tests sometimes fail in the
netdev CI because of large discrepancies between the expected and
measured ratios [1]. This can be explained by the fact that the IPv4
tests generate about 3,600 different flows whereas the IPv6 tests only
generate about 784 different flows (potentially by mistake).
Fix by aligning the IPv6 tests to the IPv4 ones and increase the number
of generated flows.
[1]
[...]
# TEST: ping [ OK ]
# INFO: Running IPv6 over GRE over IPv4 multipath tests
# TEST: ECMP [FAIL]
# Too large discrepancy between expected and measured ratios
# INFO: Expected ratio 1.00 Measured ratio 1.18
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests sometimes fail on the netdev CI because the expected number
of packets is larger than expected [1].
Make the tests more robust by specifically matching on VXLAN
encapsulated packets and allowing up to five stray packets instead of
just two.
[1]
[...]
# TEST: VXLAN: ECN encap: 0x00->0x00 [FAIL]
# v1: Expected to capture 10 packets, got 13.
# TEST: VXLAN: ECN encap: 0x01->0x01 [ OK ]
# TEST: VXLAN: ECN encap: 0x02->0x02 [ OK ]
# TEST: VXLAN: ECN encap: 0x03->0x02 [ OK ]
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
