We are going to queue up a number of patches that depend
on fresh changes in x86/sev - merge in that branch to
reduce the number of conflicts going forward.
Also resolve a current conflict with x86/sev.
Conflicts:
arch/x86/include/asm/coco.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The notable changes are:
- New features and improvements:
- Configure interrupt affinity according to NUMA nodes for the MSI-X interrupts that are
assigned to the userspace application which acquires the device.
- Move the HBM MMU page tables to reside inside the HBM to minimize latency when doing
page-walks.
- Improve the device reset mechanism when consecutive heartbeat failures occur (firmware
fails to ack on heartbeat message).
- Check also extended errors in the PCIe addr_dec interrupt information.
- Rate limit the error messages that can be printed to dmesg log by userspace actions.
- Firmware related fixes:
- Handle requests from firmware to reserve device memory
- Bug fixes and code cleanups:
- constify the struct device_type usage in accel (accel_sysfs_device_minor).
- Fix the PCI health check by reading uncached register.
- Fix reporting of drain events.
- Fix debugfs files permissions.
- Fix calculation of DRAM BAR base address.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmXcSN4ACgkQZR1NuKta
54Cz1wf9F7e16PkqyJ3xow++s4Poj4uRbVxu4YVkRNtLKLmLbfcXal07QTJU08oL
wVGe9IaF1T1wDTqtTJsLKHO9iocSAFqlCiQkQ7v2DjKSdqjGShWGU8t/CDkq22F3
+MSQi6Zsgy3yUOppgXt7M2a7tD4pS/XyWyMs2E1NUzW2d0s9parlxdEknjX7dnAv
yYCsCvq5GGDt7q+TEaGySD8vU5ZP3bGG1hGtDstJ5Z2kbR4MHFS0Ms+dDNvjIPFW
Q5c/WtKIeAvbnsMOsF2JjqDRkyvaSrFyAyI3xqHQjXK65LK3F67BV1QOzlteJcdr
WSg5LnHwARi2REwlkj1PvcGDPYlSmA==
=mTWh
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2024-02-26' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver and accel changes for v6.9.
The notable changes are:
- New features and improvements:
- Configure interrupt affinity according to NUMA nodes for the MSI-X interrupts that are
assigned to the userspace application which acquires the device.
- Move the HBM MMU page tables to reside inside the HBM to minimize latency when doing
page-walks.
- Improve the device reset mechanism when consecutive heartbeat failures occur (firmware
fails to ack on heartbeat message).
- Check also extended errors in the PCIe addr_dec interrupt information.
- Rate limit the error messages that can be printed to dmesg log by userspace actions.
- Firmware related fixes:
- Handle requests from firmware to reserve device memory
- Bug fixes and code cleanups:
- constify the struct device_type usage in accel (accel_sysfs_device_minor).
- Fix the PCI health check by reading uncached register.
- Fix reporting of drain events.
- Fix debugfs files permissions.
- Fix calculation of DRAM BAR base address.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdxJprop0EniVQtf@ogabbay-vm-u22.habana-labs.com
StarFive JH8100 uses the same OpenCores PWM controller as JH7110.
Mark JH8100 as compatible to the OpenCores PWM controller.
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
When perf_init_event() calls perf_try_init_event() to init pmu driver,
searches for the next pmu driver only when the return value is -ENOENT.
Therefore, hisi_ptt_pmu_event_init() needs to check the type at the
beginning of the function.
Otherwise, in the case of perf-task mode, perf_try_init_event() returns
-EOPNOTSUPP and skips subsequent pmu drivers, causes perf_init_event() to
fail.
Fixes: ff0de066b4 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240108121906.3514820-1-yangjihong1@huawei.com
UAPI Changes:
- New query to the GuC firmware submission version. (José Roberto de Souza)
- Remove unused persistent exec_queues (Thomas Hellström)
- Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi)
- Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping
should be dumped (Maarten Lankhorst)
Cross-drivers Changes:
- Make sure intel_wakeref_t is treated as opaque type on i915-display
and fix its type on xe
Driver Changes:
- Drop pre-production workarounds (Matt Roper)
- Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi)
- Start pumbling SR-IOV support with memory based interrupts
for VF (Michal Wajdeczko)
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko)
- Improve logging with GT-oriented drm_printers (Michal Wajdeczko)
- Add GuC Doorbells Manager as prep work SR-IOV during
VF provisioning ((Michal Wajdeczko)
- Refactor fake device handling in kunit integration ((Michal Wajdeczko)
- Implement additional workarounds for xe2 and MTL (Tejas Upadhyay,
Lucas De Marchi, Shekhar Chauhan, Karthik Poosa)
- Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan)
- Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio)
- Fix remaining 32b build issues and enable it back (Lucas De Marchi)
- Fix build with CONFIG_DEBUG_FS=n (Jani Nikula)
- Fix warnings from GuC ABI headers (Matthew Brost)
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko)
- Add mocs reset kunit (Ruthuvikas Ravikumar)
- Fix spellings (Colin Ian King)
- Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das)
- Release mmap mappings on rpm suspend (Badal Nilawar)
- Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld)
- Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost)
- Fix xe_exec with full long running exec queue, now returning
-EWOULDBLOCK to userspace (Matthew Brost)
- Fix CT irq handler when CT is disabled (Matthew Brost)
- Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström)
- Fix missing __iomem annotations (Thomas Hellström)
- Fix exec queue priority handling with GuC (Brian Welty)
- Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar)
- Fix C6 disabling without SLPC (Matt Roper)
- Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney)
- Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann)
- Refactor exec_queue user extensions handling and fix USM attributes
being applied too late (Brian Welty)
- Use circ_buf head/tail convention (Matthew Brost)
- Fail build if circ_buf-related defines are modified with incompatible values
(Matthew Brost)
- Fix several error paths (Dan Carpenter)
- Fix CCS copy for small VRAM copy chunks (Thomas Hellström)
- Rework driver initialization order and paths to account for driver running
in VF mode (Michal Wajdeczko)
- Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski)
- Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper)
- Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty)
- Drop display dependency on CONFIG_EXPERT (Jani Nikula)
- Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko)
- Stop creating one kunit module per kunit suite (Lucas De Marchi)
- Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko)
- Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko)
- Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio)
- Fix size calculation when writing pgtable (Fei Yang)
- Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai)
- Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi)
- Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration
(Himal Prasad Ghimiray)
- Fix error path in xe_vm_create (Moti Haimovski)
- Fix warnings in doc generation (Thomas Hellström, Badal Nilawar)
- Improve devcoredump content for mesa debugging (José Roberto de Souza)
- Fix crash in trace_dma_fence_init() (José Roberto de Souza)
- Improve CT state change handling (Matthew Brost)
- Toggle USM support for Xe2 (Lucas De Marchi)
- Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza)
- Canonicalize addresses where needed for Xe2 and add to devcoredump
(José Roberto de Souza)
- Only allow 1 ufence per exec / bind IOCTL (Matthew Brost)
- Move all display code to display/ (Jani Nikula)
- Fix sparse warnings by correctly using annotations (Thomas Hellström)
- Warn on job timeouts instead of using asserts (Matt Roper)
- Prefix macros to avoid clashes with sparc (Matthew Brost)
- Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström)
- Add status check during gsc header readout (Suraj Kandpal)
- Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost)
- Fix fence refcounting (Matthew Brost)
- Fix picking incorrect userptr VMA (Matthew Brost)
- Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost)
- Fix double initialization of display power domains (Xiaoming Wang)
- Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison)
- Bump minimum GuC version to 70.19.2 for all platforms under force-probe
(John Harrison)
- Add GuC firmware loading for Lunar Lake (John Harrison)
- Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das)
- Fix max page size of VMA during a REMAP (Matthew Brost)
- Don't ignore error when pinning pages in kthread (Matthew Auld)
- Refactor xe hwmon (Karthik Poosa)
- Add debug logs for D3cold (Riana Tauro)
- Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost)
- Always allow to override firmware blob with module param and improve
log when no firmware is found (Lucas De Marchi)
- Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström)
- Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström)
- Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman)
- Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld)
- Prefer drm_dbg() over dev_dbg() (Jani Nikula)
- Avoid function cast warnings with clang-16 (Arnd Bergmann)
- Enhance xe_bo_move trace (Priyanka Dandamudi)
- Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost)
- Add XE_VMA_PTE_64K VMA flag (Matthew Brost)
- Return 2MB page size for compact 64k PTEs (Matthew Brost)
- Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET)
- Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit)
- Drop extra newline in from sysfs files (Ashutosh Dixit)
- Implement VM snapshot support for BO's and userptr (Maarten Lankhorst)
- Add debug logs when skipping rebinds (Matthew Brost)
- Fix code generation when mixing build directories (Dafna Hirschfeld)
- Prefer struct_size over open coded arithmetic (Erick Archer)
-----BEGIN PGP SIGNATURE-----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=nLHY
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-02-25' of ssh://gitlab.freedesktop.org/drm/xe/kernel into drm-next
drm/xe feature pull for v6.9:
UAPI Changes:
- New query to the GuC firmware submission version. (José Roberto de Souza)
- Remove unused persistent exec_queues (Thomas Hellström)
- Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi)
- Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping
should be dumped (Maarten Lankhorst)
Cross-drivers Changes:
- Make sure intel_wakeref_t is treated as opaque type on i915-display
and fix its type on xe
Driver Changes:
- Drop pre-production workarounds (Matt Roper)
- Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi)
- Start pumbling SR-IOV support with memory based interrupts
for VF (Michal Wajdeczko)
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko)
- Improve logging with GT-oriented drm_printers (Michal Wajdeczko)
- Add GuC Doorbells Manager as prep work SR-IOV during
VF provisioning ((Michal Wajdeczko)
- Refactor fake device handling in kunit integration ((Michal Wajdeczko)
- Implement additional workarounds for xe2 and MTL (Tejas Upadhyay,
Lucas De Marchi, Shekhar Chauhan, Karthik Poosa)
- Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan)
- Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio)
- Fix remaining 32b build issues and enable it back (Lucas De Marchi)
- Fix build with CONFIG_DEBUG_FS=n (Jani Nikula)
- Fix warnings from GuC ABI headers (Matthew Brost)
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko)
- Add mocs reset kunit (Ruthuvikas Ravikumar)
- Fix spellings (Colin Ian King)
- Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das)
- Release mmap mappings on rpm suspend (Badal Nilawar)
- Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld)
- Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost)
- Fix xe_exec with full long running exec queue, now returning
-EWOULDBLOCK to userspace (Matthew Brost)
- Fix CT irq handler when CT is disabled (Matthew Brost)
- Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström)
- Fix missing __iomem annotations (Thomas Hellström)
- Fix exec queue priority handling with GuC (Brian Welty)
- Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar)
- Fix C6 disabling without SLPC (Matt Roper)
- Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney)
- Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann)
- Refactor exec_queue user extensions handling and fix USM attributes
being applied too late (Brian Welty)
- Use circ_buf head/tail convention (Matthew Brost)
- Fail build if circ_buf-related defines are modified with incompatible values
(Matthew Brost)
- Fix several error paths (Dan Carpenter)
- Fix CCS copy for small VRAM copy chunks (Thomas Hellström)
- Rework driver initialization order and paths to account for driver running
in VF mode (Michal Wajdeczko)
- Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski)
- Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper)
- Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty)
- Drop display dependency on CONFIG_EXPERT (Jani Nikula)
- Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko)
- Stop creating one kunit module per kunit suite (Lucas De Marchi)
- Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko)
- Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko)
- Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio)
- Fix size calculation when writing pgtable (Fei Yang)
- Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai)
- Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi)
- Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration
(Himal Prasad Ghimiray)
- Fix error path in xe_vm_create (Moti Haimovski)
- Fix warnings in doc generation (Thomas Hellström, Badal Nilawar)
- Improve devcoredump content for mesa debugging (José Roberto de Souza)
- Fix crash in trace_dma_fence_init() (José Roberto de Souza)
- Improve CT state change handling (Matthew Brost)
- Toggle USM support for Xe2 (Lucas De Marchi)
- Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza)
- Canonicalize addresses where needed for Xe2 and add to devcoredump
(José Roberto de Souza)
- Only allow 1 ufence per exec / bind IOCTL (Matthew Brost)
- Move all display code to display/ (Jani Nikula)
- Fix sparse warnings by correctly using annotations (Thomas Hellström)
- Warn on job timeouts instead of using asserts (Matt Roper)
- Prefix macros to avoid clashes with sparc (Matthew Brost)
- Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström)
- Add status check during gsc header readout (Suraj Kandpal)
- Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost)
- Fix fence refcounting (Matthew Brost)
- Fix picking incorrect userptr VMA (Matthew Brost)
- Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost)
- Fix double initialization of display power domains (Xiaoming Wang)
- Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison)
- Bump minimum GuC version to 70.19.2 for all platforms under force-probe
(John Harrison)
- Add GuC firmware loading for Lunar Lake (John Harrison)
- Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das)
- Fix max page size of VMA during a REMAP (Matthew Brost)
- Don't ignore error when pinning pages in kthread (Matthew Auld)
- Refactor xe hwmon (Karthik Poosa)
- Add debug logs for D3cold (Riana Tauro)
- Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost)
- Always allow to override firmware blob with module param and improve
log when no firmware is found (Lucas De Marchi)
- Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström)
- Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström)
- Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman)
- Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld)
- Prefer drm_dbg() over dev_dbg() (Jani Nikula)
- Avoid function cast warnings with clang-16 (Arnd Bergmann)
- Enhance xe_bo_move trace (Priyanka Dandamudi)
- Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost)
- Add XE_VMA_PTE_64K VMA flag (Matthew Brost)
- Return 2MB page size for compact 64k PTEs (Matthew Brost)
- Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET)
- Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit)
- Drop extra newline in from sysfs files (Ashutosh Dixit)
- Implement VM snapshot support for BO's and userptr (Maarten Lankhorst)
- Add debug logs when skipping rebinds (Matthew Brost)
- Fix code generation when mixing build directories (Dafna Hirschfeld)
- Prefer struct_size over open coded arithmetic (Erick Archer)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dbdkrwmcoqqlwftuc3olbauazc3pbamj26wa34puztowsnauoh@i3zms7ut4yuw
Add a description to the CPU reg property to clarify that
the reg property must match the hart ID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
atomic_check and mode_valid do not check for the same things which can
lead to surprising result if the userspace commits a mode that didn't go
through mode_valid. Let's merge the two implementations into a function
called by both.
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-35-8f4af575fce2@kernel.org
container_of_const() allows to preserve the pointer constness and is
thus more flexible than inline functions.
Let's switch all our instances of container_of() to container_of_const().
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-34-8f4af575fce2@kernel.org
The relocation table is not expected to contain a zero-termination
entry. The existing check is likely a left-over from similar x86
code that uses zero-entries as delimiters. s390 does not have ones
and therefore the check could be avoided.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Make the type of __vmlinux_relocs_64_start|end symbols as
char array, just like it is done for all other sections.
Function rescue_relocs() is simplified as result.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Do not use vmlinux.image_size within kaslr_adjust_relocs() function
to calculate the upper relocation table boundary. Instead, make both
lower and upper boundaries the function input parameters.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The end of GOT is calculated dynamically on boot. The size of GOT
is calculated on build from the start and end of GOT. Avoid both
calculations and use the end of GOT directly.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The SLAB_KASAN flag prevents merging of caches in some configurations,
which is handled in a rather complicated way via kasan_never_merge().
Since we now have a generic SLAB_NO_MERGE flag, we can instead use it
for KASAN caches in addition to SLAB_KASAN in those configurations,
and simplify the SLAB_NEVER_MERGE handling.
Tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The values of SLAB_ cache creation flags are defined by hand, which is
tedious and error-prone. Use an enum to assign the bit number and a
__SLAB_FLAG_BIT() macro to #define the final flags.
This renumbers the flag values, which is OK as they are only used
internally.
Also define a __SLAB_FLAG_UNUSED macro to assign value to flags disabled
by their respective config options in a unified and sparse-friendly way.
Reviewed-and-tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed. SLUB instead relies on the page allocator's NUMA policies.
Change the flag's value to 0 to free up the value it had, and mark it
for full removal once all users are gone.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20240131172027.10f64405@gandalf.local.home/
Reviewed-and-tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Use GENMASK() to define the prescaler mask and make the whole driver use
the mask (together with helpers such as FIELD_{GET,PREP,FIT}) instead of
needing an additional shift and max value constant.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240225151336.2728533-4-martin.blumenstingl@googlemail.com
The result of the division of new_rate by gt_target_rate can be zero (if
new_rate is smaller than gt_target_rate). Using that result as divisor
without checking can result in a division by zero error. Guard against
this by checking for a zero value earlier.
While here, also change the psv variable to an unsigned long to make
sure we don't overflow the datatype as all other types involved are also
unsiged long.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240225151336.2728533-3-martin.blumenstingl@googlemail.com
There is SAI1, SAI2, SAI3, SAI5, SAI6, SAI7 existing in this block
control, the order is discontinuous. The definition of SAI_MCLK_SEL(n)
is not match with the usage of CLK_SAIn(n).
So define SAI##n##_MCLK_SEL separately to fix the issue.
Fixes: 6cd95f7b15 ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1708683351-8504-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/01446ce9-c0e8-4467-8b2d-fd736bc5b8e4@web.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Two local variables will eventually be set to appropriate pointers
a bit later. Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/6604590e-d0f7-4798-a1b9-b2f474f3a642@web.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The function “kfree” was called in up to three cases
by the function “__imx8m_clk_hw_composite” during error handling
even if the passed variables contained a null pointer.
Adjust jump targets according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/147ca1e6-69f3-4586-b5b3-b69f9574a862@web.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXXUhsACgkQaA3BHVML
eiNVFQf+IoOXCACGkWEVmVaen50pjEfLq0OjSGHdbTJqhc9wU7Q/kPC+jEpZLyqo
OUMdXlA55BeLX52O+bvLordDPNETUsYH1QX2BYKDwcNIrvj8ISXcvdbnDcbVmttD
ZUaaBgZ0g2M6sZQvTVU88/1RtaG64+zuk9VA1dPlh6WnBtXBUeXNtD6YQjH6xY+a
MjZpB5VafwJTmQxy7qJ4yTLX291Ao8J2YZK8cCSyEr3FQKkAx9sJyp3hPurVIjLM
f1y1rtoHhxUV/OVg4M559fp6F6tUkFauv4qu5VUvmPPihJTaU0eSQxir0za4VJ4e
Jr2GOkju0oRRpKfjd0aKvaoWhl+MNg==
=aaTQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain
Now that we have moved back to direct reads the additional timing
is not required hence this can be removed.
--v2
-Add Fixes tag [Ankit]
Fixes: 3974f9c17b ("drm/i915/hdcp: Adjust timeout for read in DPMST Scenario")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-10-suraj.kandpal@intel.com
(cherry picked from commit 429ccbd1c3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Even for MST scenarios we need to do direct reads only on the
immediate downstream device the rest of the authentication is taken
care by that device. Remote reads will only be used to check
capability of the monitors in MST topology.
--v2
-Add fixes tag [Ankit]
-Derive aux where needed rather than through a function [Ankit]
Fixes: ae4f902bb3 ("drm/i915/hdcp: Send the correct aux for DPMST HDCP scenario")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-3-suraj.kandpal@intel.com
(cherry picked from commit 287c0de8b2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
A sync lost issue can be observed with two displays, when moving a plane
from one disabled display to an another disabled display, and then
enabling the display to which the plane was moved to. The exact
requirements for this to trigger are not clear.
It looks like the issue is that the layers are left enabled in the first
display's OVR registers. Even if the corresponding VP is disabled, it
still causes an issue, as if the disabled VP and its OVR would still be
in use, leading to the same VID being used by two OVRs. However, this is
just speculation based on testing the DSS behavior.
Experimentation shows that as a workaround, we can disable all the
layers in the OVR when disabling a VP. There should be no downside to
this, as the OVR is anyway effectively disabled if its VP is disabled,
and it seems to solve the sync lost issue.
However, there may be a bigger issue in play here, related to J721e
erratum i2097 ("DSS: Disabling a Layer Connected to Overlay May Result
in Synclost During the Next Frame"). Experimentation also shows that the
OVR's CHANNELIN field has similar issue. So we may need to revisit this
when we find out more about the core issue.
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213-tidss-fixes-v1-2-d709e8dfa505@ideasonboard.com
When the driver sets up the zpos property it sets the default zpos value
to the HW id of the plane. That is fine as such, but as on many DSS
versions the driver arranges the DRM planes in a different order than
the HW planes (to keep the non-scalable planes first), this leads to odd
initial zpos values. An example is J721e, where the initial zpos values
for DRM planes are 1, 3, 0, 2.
In theory the userspace should configure the zpos values properly when
using multiple planes, and in that sense the initial zpos values
shouldn't matter, but there's really no reason not to fix this and help
the userspace apps which don't handle zpos perfectly. In particular,
some versions of Weston seem to have issues dealing with the planes
with the current default zpos values.
So let's change the zpos values for the DRM planes to 0, 1, 2, 3.
Another option would be to configure the planes marked as primary planes
to zpos 0. On a two display system this would give us plane zpos values
of 0, 0, 1, 2. The end result and behavior would be very similar in this
option, and I'm not aware that this would actually help us in any way.
So, to keep the code simple, I opted for the 0, 1, 2, 3 values.
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213-tidss-fixes-v1-1-d709e8dfa505@ideasonboard.com
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
accel_sysfs_device_minor variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Today we read PCI VENDOR-ID in order to make sure PCI link is
healthy. Apparently the VENDOR-ID might be stored on host and
hence, when we read it we might not access the PCI bus.
In order to make sure PCI health check is reliable, we will start
checking the DEVICE-ID instead.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The reserved memory for FW is currently saved in an ASIC property in
units of MB, just like the value that comes from FW.
Except the fact that it is not clear from the property's name, it means
also that a calculation to actual size is required everywhere that it is
used.
Modify the property to hold the size in bytes.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the reserved memory request from FW is handled when running
with preboot only, but this request is relevant also when running with
full FW.
Modify to always handle this reservation request.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fetching sensor data can fail due to various reasons. In order
not to pollute the kernel log, those error prints must be
rate limited.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to a H/W issue, AXI drain event does not include a read/write
indication, hence we remove this print.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The unmasking is for event and it can be other event than RAZWI.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
debugfs files are created with permissions that don't align
with the access requirements.
Signed-off-by: Avri Kehat <akehat@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The glbl error cause handling has a wrong assumption that all error
bits are consecutive.
Fix the handling to check all relevant error bits per ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The FW interrupt info for a PCIe addr_dec event is set correctly, so
check for either global errors or razwi according to the indications
there.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Skip loading a linux FW image into the device with the current supported
ASICs is done for test purposes only.
Moreover, for future supported ASICs it is possible that there won't be
a need to load such an image.
The print in such a case is therefore not needed in most cases, so
replace the used dev_info() with dev_dbg().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The hop size related properties is a MMU properties and not
asic properties.
As for PMMU and HMMU we could have different sizes.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The pointer input is assigned a value that is not read, it is
being re-assigned again later with the same value. Resolve this
by moving the declaration to input into the if block.
Cleans up clang scan build warning:
warning: Value stored to 'input' during its initialization is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In newer kernel versions, irq_set_affinity_hint() is deprecated.
Instead, use the newer version which is irq_set_affinity_and_hint().
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
