- Deal with a regression in the recently refactored x86 EFI stub code on
older Dell systems by disabling randomization of the physical load
address
- Use the correct load address for relocatable Loongarch kernels
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZXgvLAAKCRAwbglWLn0t
XLgKAP9oKLP7v0TD2BJOPGqr4kEtMfZYayV2EUN387VbPYfT0wEAoeDeZmaGUYce
BuovToERSgjj2FylAWNlZATEh2d35ww=
=kv9E
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Deal with a regression in the recently refactored x86 EFI stub code
on older Dell systems by disabling randomization of the physical load
address
- Use the correct load address for relocatable Loongarch kernels
* tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Avoid physical KASLR on older Dell systems
efi/loongarch: Use load address to calculate kernel entry address
The cdclk->voltage_level if ladders are hard to read, especially as
they're written the other way around compared to how bspec lists
the limits. Let's rewrite them to use simple arrays that gives us
the max cdclk for each voltage level.
v2: Bump the jsl/ehl max cdclk in the table to 652.8 MHz to
accommodate JSL machines in CI that boot with high cdclk
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211221759.29725-1-ville.syrjala@linux.intel.com
Currently we have a hardcoded assumption that the cdclk divider
(2*cd2x divider) is always 2 when squashing is used. While that
is true for all current platforms it might not hold in the future.
So eliminate the assumption and calculate the correct divider
from the other parameters.
v2: s/cd2x divider/cdclk divider/ (Gustavo)
s/clock/unsquashed_cdclk/ (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211221636.29658-1-ville.syrjala@linux.intel.com
cdclk_pll_is_unknown() used ~0 when checking for the "VCO is
unknown" value, but the assignment uses -1. They are the same
in the end, but let's use the same ~0 form on both sides for
consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128115138.13238-2-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
ST code value for clause 45 that has been changed by
commit 8196b5fd6c ("i40e: Refactor I40E_MDIO_CLAUSE* macros")
is currently wrong.
The mentioned commit refactored ..MDIO_CLAUSE??_STCODE_MASK so
their value is the same for both clauses. The value is correct
for clause 22 but not for clause 45.
Fix the issue by adding a parameter to I40E_GLGEN_MSCA_STCODE_MASK
macro that specifies required value.
Fixes: 8196b5fd6c ("i40e: Refactor I40E_MDIO_CLAUSE* macros")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
To map phy types reported by the hardware to ethtool link mode bits,
ice uses two lookup tables (phy_type_low_lkup, phy_type_high_lkup).
The "low" table has 64 elements to cover every possible bit the hardware
may report, but the "high" table has only 13. If the hardware reports a
higher bit in phy_types_high, the driver would access memory beyond the
lookup table's end.
Instead of iterating through all 64 bits of phy_types_{low,high}, use
the sizes of the respective lookup tables.
Fixes: 9136e1f1e5 ("ice: refactor PHY type to ethtool link mode")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move arg and index in the main block of the function as they are used by
more than one case block of switch-case (3 out of 4 for arg, 2 out of 4
for index). In this way some lines of code are removed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When compiling BPF selftests with RELEASE=1, we get two new
warnings, which are treated as errors. Fix them.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231212225343.1723081-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for setting of two-bit field that allows selection of 4x lane
PCIe which was previously limited to only 2x lanes.
Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-5-s-vadapalli@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Various platforms have different maximum amount of lanes that can be
selected. Add max_lanes to struct j721e_pcie to allow for detection of this
which is needed to calculate the needed bitmask size for the possible lane
count.
Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-4-s-vadapalli@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Add definition for j784s4-pci-ep and j784s4-pci-host devices along with
schema checks for num-lanes.
Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-3-s-vadapalli@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add num-lanes schema checks based on compatible string on available lanes
for that platform.
Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-2-s-vadapalli@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
An IA55 interrupt controller is available on the RZ/G3S SoC. Add the
IA55 pclk and its reset.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
virtio-gpu kernel driver reports 16 for count_crtcs
which exceeds IGT_MAX_PIPES set to 8 in igt-gpu-tools.
This results in below memory corruption,
malloc(): corrupted top size
Received signal SIGABRT.
Stack trace:
#0 [fatal_sig_handler+0x17b]
#1 [__sigaction+0x40]
#2 [pthread_key_delete+0x14c]
#3 [gsignal+0x12]
#4 [abort+0xd3]
#5 [__fsetlocking+0x290]
#6 [timer_settime+0x37a]
#7 [__default_morecore+0x1f1b]
#8 [__libc_calloc+0x161]
#9 [drmModeGetPlaneResources+0x44]
#10 [igt_display_require+0x194]
#11 [__igt_unique____real_main1356+0x93c]
#12 [main+0x3f]
#13 [__libc_init_first+0x8a]
#14 [__libc_start_main+0x85]
#15 [_start+0x21]
This is fixed in igt-gpu-tools by increasing IGT_MAX_PIPES to 16.
https://patchwork.freedesktop.org/series/126327/
Uprev IGT to include the patches which fixes this issue.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-9-vignesh.raman@collabora.com
Mediatek 8173 and 8183 SOCs have a separate display controller
and GPU with different drivers for each. For mt8173, the GPU
driver is powervr and the display driver is mediatek. In the
case of mt8183, the GPU driver is panfrost and the display
driver is mediatek. Setting IGT_FORCE_DRIVER to panfrost for
mt8173 is not the expected driver. So set mediatek for mt8173.
Support to test both GPU and display drivers for these ARM SOCs
will be added in the next patch series to increase test coverage.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-7-vignesh.raman@collabora.com
Instead of modifying files in git to enable/disable
configs, use scripts/config on the .config file which
will be used for building the kernel.
Acked-by: Helen Koike <helen.koike@collabora.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-6-vignesh.raman@collabora.com
Enable the following jobs, as the issues noted in the
TODO comments have been resolved. This will ensure that these jobs
are now included and executed as part of the CI/CD pipeline.
msm:apq8016:
TODO: current issue: it is not fiding the NFS root.
mediatek:mt8173:
TODO: current issue: device is hanging.
virtio_gpu:none:
TODO: current issue: malloc(): corrupted top size.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-5-vignesh.raman@collabora.com
Force db410c to host mode to fix network issue which results in failure
to mount root fs via NFS.
See cb72a629
Use apq8016-sbc-usb-host.dtb which allows the USB controllers
to work in host mode.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-3-vignesh.raman@collabora.com
It is claimed that srcu_read_lock_nmisafe() NMI-safe. However it
triggers a lockdep if used from NMI because lockdep expects a deadlock
since nothing disables NMIs while the lock is acquired.
This is because commit f0f44752f5 ("rcu: Annotate SRCU's update-side
lockdep dependencies") annotates synchronize_srcu() as a write lock
usage. This helps to detect a deadlocks such as
srcu_read_lock();
synchronize_srcu();
srcu_read_unlock();
The side effect is that the lock srcu_struct now has a USED usage in normal
contexts, so it conflicts with a USED_READ usage in NMI. But this shouldn't
cause a real deadlock because the write lock usage from synchronize_srcu()
is a fake one and only used for read/write deadlock detection.
Use a try-lock annotation for srcu_read_lock_nmisafe() to avoid lockdep
complains if used from NMI.
Fixes: f0f44752f5 ("rcu: Annotate SRCU's update-side lockdep dependencies")
Link: https://lore.kernel.org/r/20230927160231.XRCDDSK4@linutronix.de
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
The ->encode_fh method is responsible for setting amount of space
required for storing the file handle if not enough space was provided.
bch2_encode_fh() was not setting required length in that case which
breaks e.g. fanotify. Fix it.
Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When intercepts are enabled for MSR_IA32_XSS, the host will swap in/out
the guest-defined values while context-switching to/from guest mode.
However, in the case of SEV-ES, vcpu->arch.guest_state_protected is set,
so the guest-defined value is effectively ignored when switching to
guest mode with the understanding that the VMSA will handle swapping
in/out this register state.
However, SVM is still configured to intercept these accesses for SEV-ES
guests, so the values in the initial MSR_IA32_XSS are effectively
read-only, and a guest will experience undefined behavior if it actually
tries to write to this MSR. Fortunately, only CET/shadowstack makes use
of this register on SEV-ES-capable systems currently, which isn't yet
widely used, but this may become more of an issue in the future.
Additionally, enabling intercepts of MSR_IA32_XSS results in #VC
exceptions in the guest in certain paths that can lead to unexpected #VC
nesting levels. One example is SEV-SNP guests when handling #VC
exceptions for CPUID instructions involving leaf 0xD, subleaf 0x1, since
they will access MSR_IA32_XSS as part of servicing the CPUID #VC, then
generate another #VC when accessing MSR_IA32_XSS, which can lead to
guest crashes if an NMI occurs at that point in time. Running perf on a
guest while it is issuing such a sequence is one example where these can
be problematic.
Address this by disabling intercepts of MSR_IA32_XSS for SEV-ES guests
if the host/guest configuration allows it. If the host/guest
configuration doesn't allow for MSR_IA32_XSS, leave it intercepted so
that it can be caught by the existing checks in
kvm_{set,get}_msr_common() if the guest still attempts to access it.
Fixes: 376c6d2850 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Cc: Alexey Kardashevskiy <aik@amd.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231016132819.1002933-4-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ltk050h3148w variant expects the horizontal component lane byte clock
cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the
pixel clock.
Using the pixel clock rate by default for this calculation was introduced
in commit ac87d23694 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock
rate to calculate lbcc") and starting from commit 93e82bb4de
("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
only panels that support burst mode can keep using the lane_mbps. So add
MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host.
Fixes: 93e82bb4de ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com
ASan complains a memory leakage in hisi_ptt_process_auxtrace_event()
that the data buffer is not freed. Since currently we only support the
raw dump trace mode, the data buffer is used only within this function.
So fix this by freeing the data buffer before going out.
Fixes: 5e91e57e68 ("perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <Namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/20231207081635.8427-3-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dump the raw trace by `perf report -D` ASan reports a memory
leakage in perf_event__fprintf_event_update().
It shows that we allocated a temporary cpumap for dumping the CPUs but
doesn't release it and it's not used elsewhere. Fix this by free the
cpumap after the dumping.
Fixes: c853f9394b ("perf tools: Add perf_event__fprintf_event_update function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20231207081635.8427-2-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The RZ/G3S Smarc Module has Ethernet PHYs (KSZ9131) connected to each
Ethernet IP. For this, add proper DT descriptions to enable Ethernet
communication through these PHYs.
The interface b/w PHYs and MACs is RGMII. The skew settings were set to
zero as based on phy-mode (rgmii-id) the KSZ9131 driver enables internal
DLL, which adds a 2ns delay b/w clocks (TX/RX) and data signals.
Different pin settings were applied to TXC and TX_CTL compared with the
rest of the RGMII pins to comply with requirements for these pins
imposed by HW manual of RZ/G3S (see chapters "Ether Ch0 Voltage Mode
Control Register (ETH0_POC)", "Ether Ch1 Voltage Mode Control Register
(ETH1_POC)", for power source selection, "Ether MII/RGMII Mode Control
Register (ETH_MODE)" for output-enable and "Input Enable Control
Register (IEN_m)" for input-enable configurations).
Also enable the Ethernet interfaces by selecting SW_CONFIG3 = SW_ON.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-12-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The intention of the SW_SD0_DEV_SEL and SW_SD2_EN macros was to reflect the
state of the SW_CONFIG individual switches available on the RZ/G3S Smarc
Module, and at the same time to have a descriptive name for the switches
themselves. Each individual switch is associated with a signal name,
which might be active-low or not on the board. Using signal names
instead of SW_CONFIG switch names may be confusing for a user who just
playes with switches to select individual functionalities, but also for
an advanced user who looks at the schematics. To avoid even further
confusion, use the switches' names here and instantiate them with an
ON/OFF state. This should be simpler, even though the name of the
switches is not that intuitive. The switches' names documentation
reflects the switches' purposes.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-11-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rename min_buffers_needed into min_queued_buffers and update
the documentation about it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: Drop the change where min_queued_buffers + 1 buffers would be]
[hverkuil: allocated. Now this patch only renames this field instead of making]
[hverkuil: a functional change as well.]
[hverkuil: Renamed 3 remaining min_buffers_needed occurrences.]
Randy reported yet another build issue with randconfigs on rv32:
WARNING: unmet direct dependencies detected for DMA_GLOBAL_POOL
Depends on [n]: !ARCH_HAS_DMA_SET_UNCACHED [=n] && !DMA_DIRECT_REMAP [=y]
Selected by [y]:
- ARCH_R9A07G043 [=y] && SOC_RENESAS [=y] && RISCV [=y] && NONPORTABLE [=y] && RISCV_ALTERNATIVE [=y] && !RISCV_ISA_ZICBOM [=n] && RISCV_SBI [=y]
This happens when DMA_DIRECT_REMAP is selected by the T-Head CMO erratum
option and DMA_GLOBAL_POOL is selected by the Andes CMO erratum. Block
selecting the RZ/Five config option, and by extension DMA_GLOBAL_POOL,
if DMA_DIRECT_REMAP has already been enabled.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/24942b4d-d16a-463f-b39a-f9dfcb89d742@infradead.org/
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231211-primate-arbitrate-fbcd307a0b00@spud
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When CONFIG_COMMON_CLK is disabled, e.g. on an x86 randconfig compile test,
clang reports a field overflow from propagating the result of a division by
zero:
drivers/leds/leds-sun50i-a100.c:309:12: error: call to '__compiletime_assert_265' declared with 'error' attribute: FIELD_PREP: value too large for the field
control = FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T1H, timing->t1h_ns / cycle_ns) |
Avoid the problem by adding an explicit check for the zero value here. Alternatively
the assertion could be avoided with a Kconfig dependency on COMMON_CLK.
Fixes: 090a25ad9798 ("leds: sun50i-a100: New driver for the A100 LED controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20231212214536.175327-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The conversion to CLK_FRAC_DIVIDER_POWER_OF_TWO_PS uses wrong flags
in the parameters and hence miscalculates the values in the clock
divider. Fix this by applying the flag to the proper parameter.
Fixes: 82f53f9ee5 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Alex Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20231211111441.3910083-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
filemap_lock_folio() returns ERR_PTR(-ENOENT) if the thing is not
in cache - not NULL like find_lock_page() used to.
Fixes: 5fb7bd50b3 "ufs: add ufs_get_locked_folio and ufs_put_locked_folio"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the detection+enablement of boot cpucaps is separate from the
patching of boot cpucap alternatives, which means there's a period where
cpus_have_cap($CAP) and alternative_has_cap($CAP) may be mismatched.
It would be preferable to manage the boot cpucaps in the same way as the
system cpucaps, both for clarity and to minimize the risk of accidental
usage of code relying upon an alternative which has not yet been
patched.
This patch aligns the handling of boot cpucaps with the handling of
system cpucaps:
* The existing setup_boot_cpu_capabilities() function is moved to be
closer to the setup_system_capabilities() and setup_system_features()
functions so that they're more clearly related and more likely to be
updated together in future.
* The patching of boot cpucap alternatives is moved into
setup_boot_cpu_capabilities(), immediately after boot cpucaps are
detected and enabled.
* A new setup_boot_cpu_features() function is added to mirror
setup_system_features(); this handles initialization of cpucap data
structures and calls setup_boot_cpu_capabilities(). This makes
init_cpu_features() a closer mirror to update_cpu_features(), and
makes smp_prepare_boot_cpu() a closer mirror to smp_cpus_done().
Importantly, while these changes alter the structure of the code, they
retain the existing order of calls to:
init_cpu_features(); // prefix initializing feature regs
init_cpucap_indirect_list();
detect_system_supports_pseudo_nmi();
update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
enable_cpu_capabilities(SCOPE_BOOT_CPU);
apply_boot_alternatives();
... and hence there should be no functional change as a result of this
patch; this is purely a structural cleanup.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231212170910.3745497-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Recent changes to remove cpus_have_const_cap() introduced new users of
cpus_have_cap() in the period between detecting system cpucaps and
patching alternatives. It would be preferable to defer these until after
the relevant cpucaps have been patched so that these can use the usual
feature check helper functions, which is clearer and has less risk of
accidental usage of code relying upon an alternative which has not yet
been patched.
This patch reworks the system-wide cpucap detection and patching to
minimize this transient period:
* The detection, enablement, and patching of system cpucaps is moved
into a new setup_system_capabilities() function so that these can be
grouped together more clearly, with no other functions called in the
period between detection and patching. This is called from
setup_system_features() before the subsequent checks that depend on
the cpucaps.
The logging of TTBR0 PAN and cpucaps with a mask is also moved here to
keep these as close as possible to update_cpu_capabilities().
At the same time, comments are corrected and improved to make the
intent clearer.
* As hyp_mode_check() only tests system register values (not hwcaps) and
must be called prior to patching, the call to hyp_mode_check() is
moved before the call to setup_system_features().
* In setup_system_features(), the use of system_uses_ttbr0_pan() is
restored, now that this occurs after alternatives are patched. This is
a partial revert of commit:
53d62e995d ("arm64: Avoid cpus_have_const_cap() for ARM64_HAS_PAN")
* In sve_setup() and sme_setup(), the use of system_supports_sve() and
system_supports_sme() respectively are restored, now that these occur
after alternatives are patched. This is a partial revert of commit:
a76521d160 ("arm64: Avoid cpus_have_const_cap() for ARM64_{SVE,SME,SME2,FA64}")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231212170910.3745497-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There are a few quirks around using lazy wake for poll unconditionally,
and one of them is related the EPOLLEXCLUSIVE. Those may trigger
exclusive wakeups, which wake a limited number of entries in the wait
queue. If that wake number is less than the number of entries someone is
waiting for (and that someone is also using DEFER_TASKRUN), then we can
get stuck waiting for more entries while we should be processing the ones
we already got.
If we're doing exclusive poll waits, flag the request as not being
compatible with lazy wakeups.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 6ce4a93dbb ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups")
Signed-off-by: Jens Axboe <axboe@kernel.dk>