- get rid of the cached_irq_mask variable
- use BIT() macro instead of bit shifts
- drop .disable and .enable as they are equivalent to the default
implementations
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231208163857.82644-1-jcmvbkbc@gmail.com
io_uring can currently open/close regular files or fixed/direct
descriptors. Or you can instantiate a fixed descriptor from a regular
one, and then close the regular descriptor. But you currently can't turn
a purely fixed/direct descriptor into a regular file descriptor.
IORING_OP_FIXED_FD_INSTALL adds support for installing a direct
descriptor into the normal file table, just like receiving a file
descriptor or opening a new file would do. This is all nicely abstracted
into receive_fd(), and hence adding support for this is truly trivial.
Since direct descriptors are only usable within io_uring itself, it can
be useful to turn them into real file descriptors if they ever need to
be accessed via normal syscalls. This can either be a transitory thing,
or just a permanent transition for a given direct descriptor.
By default, new fds are installed with O_CLOEXEC set. The application
can disable O_CLOEXEC by setting IORING_FIXED_FD_NO_CLOEXEC in the
sqe->install_fd_flags member.
Suggested-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
linux/io_uring.h is slowly becoming a rubbish bin where we put
anything exposed to other subsystems. For instance, the task exit
hooks and io_uring cmd infra are completely orthogonal and don't need
each other's definitions. Start cleaning it up by splitting out all
command bits into a new header file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ec50bae6e21f371d3850796e716917fc141225a.1701391955.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At one point in time we had an optimisation that would not spin up a
linked timeout timer when the master request successfully completes
inline (during the first nowait execution attempt). We somehow lost it,
so this patch restores it back.
Note, that it's fine using io_arm_ltimeout() after the io_issue_sqe()
completes the request because of delayed completion, but that that adds
unwanted overhead.
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8bf69c2a4beec14c565c85c86edb871ca8b8bcc8.1701390926.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOPOLL request should never return IOU_OK, so the following iopoll
queueing check in io_issue_sqe() after getting IOU_OK doesn't make any
sense as would never turn true. Let's optimise on that and return a bit
earlier. It's also much more resilient to potential bugs from
mischieving iopoll implementations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2f8690e2fa5213a2ff292fac29a7143c036cdd60.1701390926.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge vfs.file from the VFS tree to avoid conflicts with receive_fd() now
having 3 arguments rather than just 2.
* 'vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
The MPM hardware is accessible from the ARM CPUs through a shared memory
region (RPM MSG RAM) which is also concurrently accessed by other kinds of
cores on the system like modem, ADSP etc.
Modeling this relation in a (somewhat) sane manner in the device tree
requires to
- either present the MPM as a child of said memory region, which
makes little sense, as a mapped memory carveout is not a bus.
- define nodes which bleed their register spaces into one another
- or passing their slice of the MSG RAM through a property
Go with the third option and add a way to map a region passed through the
"qcom,rpm-msg-ram" property as register space for the MPM interrupt
controller.
The current way of using 'reg' is preserved for backwards compatibility
reasons.
[ tglx: Massaged changelog ]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20230328-topic-msgram_mpm-v7-2-6ee2bfeaac2c@linaro.org
Due to the wild nature of the Qualcomm RPM Message RAM, the kernel can't
really use 'reg' to point to the MPM's slice of Message RAM without cutting
into an already-defined RPM MSG RAM node used for GLINK and SMEM.
Document passing the register space as a slice of SRAM through the
qcom,rpm-msg-ram property. This also makes 'reg' deprecated.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230328-topic-msgram_mpm-v7-1-6ee2bfeaac2c@linaro.org
Document the RZ/G3S (R9108G045) interrupt controller. This has few extra
functionalities compared with RZ/G2UL but the already existing driver
can still be used.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231120111820.87398-9-claudiu.beznea.uj@bp.renesas.com
The irqchip-renesas-rzg2l driver is used on RZ/G3S SoC. RZ/G3S can go into
deep sleep states where power to different SoC's parts is cut off and RAM
is switched to self-refresh. The resume from these states is done with the
help of the bootloader.
The IA55 IRQ controller needs to be reconfigured when resuming from deep
sleep state. For this the IA55 registers are cached in suspend and restored
in resume.
The IA55 IRQ controller is connected to GPIO controller and GIC as follows:
┌──────────┐ ┌──────────┐
│ │ SPIX │ │
│ ├─────────►│ │
│ │ │ │
│ │ │ │
┌────────┐IRQ0-7 │ IA55 │ │ GIC │
Pin0 ───────►│ ├─────────────►│ │ │ │
│ │ │ │ PPIY │ │
... │ GPIO │ │ ├─────────►│ │
│ │GPIOINT0-127 │ │ │ │
PinN ───────►│ ├─────────────►│ │ │ │
└────────┘ └──────────┘ └──────────┘
where:
- Pin0 is the first GPIO controller pin
- PinN is the last GPIO controller pin
- SPIX is the SPI interrupt with identifier X
- PPIY is the PPI interrupt with identifier Y
Implement suspend/resume functionality with syscore_ops to be able to
cache/restore the registers after/before the GPIO controller suspend/resume
functions are invoked.
As the syscore_ops suspend/resume functions do not take any argument make
the driver private data static so it can be accessed from the
suspend/resume functions.
The IA55 interrupt controller is resumed before the GPIO controller. As
GPIO pins could be in an a state which causes spurious interrupts, the
reconfiguration of the interrupt controller is restricted to restore the
interrupt type and leave them disabled.
An eventually required interrupt enable operation will be done as part of
the GPIO controller resume function after restoring the GPIO state.
[ tglx: Massaged changelog ]
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-8-claudiu.beznea.uj@bp.renesas.com
There are 2 TITSR registers available on the IA55 interrupt controller.
Add a macro that retrieves the TITSR register offset based on it's
index. This macro is useful in when adding suspend/resume support so both
TITSR registers can be accessed in a for loop.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-7-claudiu.beznea.uj@bp.renesas.com
The RZ/G2L manual (chapter "IRQ Status Control Register (ISCR)") describes
the operation to clear interrupts through the ISCR register as follows:
[Write operation]
When "Falling-edge detection", "Rising-edge detection" or
"Falling/Rising-edge detection" is set in IITSR:
- In case ISTAT is 1
0: IRQn interrupt detection status is cleared.
1: Invalid to write.
- In case ISTAT is 0
Invalid to write.
When "Low-level detection" is set in IITSR.:
Invalid to write.
Take the interrupt type into account when clearing interrupts through the
ISCR register to avoid writing the ISCR when the interrupt type is level.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-6-claudiu.beznea.uj@bp.renesas.com
Document structure members to follow the requirements specified in
maintainer-tip, section 4.3.7. Struct declarations and initializers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-5-claudiu.beznea.uj@bp.renesas.com
Align struct member names to tabs to follow the requirements from
maintainer-tip file. 3 tabs were used at the moment as the next commits
will add a new member which requires 3 tabs for a better view.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-4-claudiu.beznea.uj@bp.renesas.com
Use tabs instead of spaces in definition of TINT_EXTRACT_HWIRQ()
and TINT_EXTRACT_GPIOINT() macros to align with coding style
requirements described in Documentation/process/coding-style.rst,
"Indentation" chapter.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-3-claudiu.beznea.uj@bp.renesas.com
Now that kernel mode FPSIMD state is context switched along with other
task state, we can enable the existing logic that keeps track of which
task's FPSIMD state the CPU is holding in its registers. If it is the
context of the task that we are switching to, we can elide the reload of
the FPSIMD state from memory.
Note that we also need to check whether the FPSIMD state on this CPU is
the most recent: if a task gets migrated away and back again, the state
in memory may be more recent than the state in the CPU. So add another
CPU id field to task_struct to keep track of this. (We could reuse the
existing CPU id field used for user mode context, but that might result
in user state to be discarded unnecessarily, given that two distinct
CPUs could be holding the most recent user mode state and the most
recent kernel mode state)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231208113218.3001940-9-ardb@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, the FPSIMD register file is not preserved and restored along
with the general registers on exception entry/exit or context switch.
For this reason, we disable preemption when enabling FPSIMD for kernel
mode use in task context, and suspend the processing of softirqs so that
there are no concurrent uses in the kernel. (Kernel mode FPSIMD may not
be used at all in other contexts).
Disabling preemption while doing CPU intensive work on inputs of
potentially unbounded size is bad for real-time performance, which is
why we try and ensure that SIMD crypto code does not operate on more
than ~4k at a time, which is an arbitrary limit and requires assembler
code to implement efficiently.
We can avoid the need for disabling preemption if we can ensure that any
in-kernel users of the NEON will not lose the FPSIMD register state
across a context switch. And given that disabling softirqs implicitly
disables preemption as well, we will also have to ensure that a softirq
that runs code using FPSIMD can safely interrupt an in-kernel user.
So introduce a thread_info flag TIF_KERNEL_FPSTATE, and modify the
context switch hook for FPSIMD to preserve and restore the kernel mode
FPSIMD to/from struct thread_struct when it is set. This avoids any
scheduling blackouts due to prolonged use of FPSIMD in kernel mode,
without the need for manual yielding.
In order to support softirq processing while FPSIMD is being used in
kernel task context, use the same flag to decide whether the kernel mode
FPSIMD state needs to be preserved and restored before allowing FPSIMD
to be used in softirq context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231208113218.3001940-8-ardb@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Kernel mode NEON will preserve the user mode FPSIMD state by saving it
into the task struct before clobbering the registers. In order to avoid
the need for preserving kernel mode state too, we disallow nested use of
kernel mode NEON, i..e, use in softirq context while the interrupted
task context was using kernel mode NEON too.
Originally, this policy was implemented using a per-CPU flag which was
exposed via may_use_simd(), requiring the users of the kernel mode NEON
to deal with the possibility that it might return false, and having NEON
and non-NEON code paths. This policy was changed by commit
13150149aa ("arm64: fpsimd: run kernel mode NEON with softirqs
disabled"), and now, softirq processing is disabled entirely instead,
and so may_use_simd() can never fail when called from task or softirq
context.
This means we can drop the fpsimd_context_busy flag entirely, and
instead, ensure that we disable softirq processing in places where we
formerly relied on the flag for preventing races in the FPSIMD preserve
routines.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231208113218.3001940-7-ardb@google.com
[will: Folded in fix from CAMj1kXFhzbJRyWHELCivQW1yJaF=p07LLtbuyXYX3G1WtsdyQg@mail.gmail.com]
Signed-off-by: Will Deacon <will@kernel.org>
If WED rx is enabled, rx buffers are added to a buffer pool that can be
filled from multiple page pools. Because buffers freed from rx poll are
not guaranteed to belong to the processed queue's page pool, lockless
caching must not be used in this case.
Cc: stable@vger.kernel.org
Fixes: 2f5c3c77fc ("wifi: mt76: switch to page_pool allocator")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231208075004.69843-1-nbd@nbd.name
This adds support for the nintendo switch online controllers which
include the SNES, Genesis, and N64 Controllers.
As each nso controller only implements a subset of what a pro
controller can do. Each of these 'features' were broken up in to
seperate functions which include right stick, left stick, imu, and
dpad and depending on the controller type that it is, it will call
the supported functions appropriately.
Each controller now has a struct which maps the bit within the hid
in report to a button.
The name given to the device now comes directly from the hid
device name rather than looking up a predefined string.
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Tested-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
JingZao(京造) WKB603 keyboard is a rebranded product of Jamesdonkey RS2
keyboard, identified as "hfd.cn WKB603" in wired mode, "WKB603" in bluetooth
mode. Adding them to the list of non-apple keyboards fixes function key.
Signed-off-by: Yan Jun <jerrysteve1101@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit 46a0a2c96f ("HID: lenovo: Detect quirk-free fw on cptkbd and
stop applying workaround") introduced a regression for ThinkPad
TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses
the same workarounds) but slightly different so that there are
false-positives during detecting well-behaving firmware. This commit
restricts detecting well-behaving firmware to the only model which
known to have one and have stable enough quirks to not cause
false-positives.
Fixes: 46a0a2c96f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit
bf904d2762 ("x86/pti/64: Remove the SYSCALL64 entry trampoline")
removed the syscall trampoline and instead opted to enable using the
default SYSCALL64 entry point by mapping the percpu TSS. Unfortunately,
the PTI documentation wasn't updated when the respective changes were
made, so bring the doc up to speed.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231102130204.41043-1-nik.borisov@suse.com
The lock member of struct subchannel used to be a spinlock, but became
a pointer to a spinlock with commit 2ec2298412 ("[S390] subchannel
lock conversion."). This might have been justified back then, but with
the current state of affairs, there is no reason to manage a separate
spinlock object.
Let's simplify things and pull the spinlock back into struct subchannel.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Link: https://lore.kernel.org/r/20231101115751.2308307-1-pasic@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Updates for the hwtracing subsystem includes :
- Support for CoreSight TPDM DSB set
- Support for tuning Cycle count Threshold for CoreSight ETM via perf
- Support for TRBE on ACPI based systems
- Support for choosing buffer mode in ETR for sysfs mode
- Improvements to HiSilicon PTT driver
- Cleanups to Ultrasoc SMB driver
- Cleanup .remove callback for various Coresight platform drivers
- Remove Leo Yan from Reviewers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=7+gH
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v6.8
Updates for the hwtracing subsystem includes :
- Support for CoreSight TPDM DSB set
- Support for tuning Cycle count Threshold for CoreSight ETM via perf
- Support for TRBE on ACPI based systems
- Support for choosing buffer mode in ETR for sysfs mode
- Improvements to HiSilicon PTT driver
- Cleanups to Ultrasoc SMB driver
- Cleanup .remove callback for various Coresight platform drivers
- Remove Leo Yan from Reviewers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (32 commits)
coresight: ultrasoc-smb: Use guards to cleanup
coresight: ultrasoc-smb: Convert to platform remove callback returning void
coresight: trbe: Convert to platform remove callback returning void
coresight: replicator: Convert to platform remove callback returning void
coresight: funnel: Convert to platform remove callback returning void
coresight: etm4x: Convert to platform remove callback returning void
coresight: dummy: Convert to platform remove callback returning void
coresight: etm4x: Fix width of CCITMIN field
coresight-tpdm: Correct the property name of MSR number
hwtracing: hisi_ptt: Optimize the trace data committing
hwtracing: hisi_ptt: Disable interrupt after trace end
Documentation: ABI: coresight-tpdm: Fix Bit[3] description indentation
coresight-tpdm: Add nodes for dsb msr support
dt-bindings: arm: Add support for DSB MSR register
coresight-tpdm: Add nodes for timestamp request
coresight-tpdm: Add nodes to configure pattern match output
coresight-tpdm: Add nodes for dsb edge control
coresight-tpdm: Add node to set dsb programming mode
coresight-tpdm: Add nodes to set trigger timestamp and type
coresight-tpdm: Add reset node to TPDM node
...
Documentation says only DTDL of 200 is allowed for this SoC.
Fixes: 4286db8456 ("spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://msgid.link/r/20231212081239.14254-1-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to use a GFP_USER flag for struct super_block allocation
in the alloc_super(). Instead, let's use GFP_KERNEL for that.
>From the memory management perspective, the only difference between
GFP_USER and GFP_KERNEL is that GFP_USER allocations are tied to a cpuset,
while GFP_KERNEL ones are not.
There is no real issue and this is not a candidate to go to the stable,
but let's fix it for a consistency sake.
Cc: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20231208151022.156273-1-aleksandr.mikhalitsyn@canonical.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix kernel-doc warnings found when using "W=1".
wrapper.c:48: warning: No description found for return value of 'hfsplus_submit_bio'
wrapper.c:49: warning: Function parameter or member 'opf' not described in 'hfsplus_submit_bio'
wrapper.c:49: warning: Excess function parameter 'op' description in 'hfsplus_submit_bio'
wrapper.c:49: warning: Excess function parameter 'op_flags' description in 'hfsplus_submit_bio'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231206024317.31020-1-rdunlap@infradead.org
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
relatime_need_update should return bool to consistent with the function
__atime_needs_update that is caller
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://lore.kernel.org/r/20231205064545.332322-1-gehao@kylinos.cn
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit c73be61ced ("pipe: Add general notification queue support") a
regression was introduced that would lock up resized pipes under certain
conditions. See the reproducer in [1].
The commit resizing the pipe ring size was moved to a different
function, doing that moved the wakeup for pipe->wr_wait before actually
raising pipe->max_usage. If a pipe was full before the resize occured it
would result in the wakeup never actually triggering pipe_write.
Set @max_usage and @nr_accounted before waking writers if this isn't a
watch queue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212295 [1]
Link: https://lore.kernel.org/r/20231201-orchideen-modewelt-e009de4562c6@brauner
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Lukas Schauer <lukas@schauer.dev>
[Christian Brauner <brauner@kernel.org>: rewrite to account for watch queues]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Honestly, there's little value in having a helper with and without that
int __user *ufd argument. It's just messy and doesn't really give us
anything. Just expose receive_fd() with that argument and get rid of
that helper.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-5-e73ca6f4ea83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Not every subsystem needs to have their own specialized helper.
Just us the __receive_fd() helper.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-4-e73ca6f4ea83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The naming is actively misleading since we switched to
SLAB_TYPESAFE_BY_RCU. rcu_head is #define callback_head. Use
callback_head directly and rename f_rcuhead to f_task_work.
Add comments in there to explain what it's used for.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-3-e73ca6f4ea83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Only io_uring uses __close_fd_get_file(). All it does is hide
current->files but io_uring accesses files_struct directly right now
anyway so it's a bit pointless. Just rename pick_file() to
file_close_fd_locked() and let io_uring use it. Add a lockdep assert in
there that we expect the caller to hold file_lock while we're at it.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-2-e73ca6f4ea83@kernel.org
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
That really shouldn't have "get" in there as that implies we're bumping
the reference count which we don't do at all. We used to but not anmore.
Now we're just closing the fd and pick that file from the fdtable
without bumping the reference count. Update the wrong documentation
while at it.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-1-e73ca6f4ea83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU") caused a
performance regression as reported by the kernel test robot.
The __fget_light() function is one of those critical ones for some
loads, and the code generation was unnecessarily impacted. Let's just
write that function to better.
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Closes: https://lore.kernel.org/oe-lkp/202311201406.2022ca3f-oliver.sang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wiCJtLbFWNURB34b9a_R_unaH3CiMRXfkR0-iihB_z68A@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
A file that has never gotten FMODE_OPENED will never have RCU-accessed
references, its final fput() is equivalent to file_free() and if it
doesn't have FMODE_BACKING either, it can be done from any context and
won't need task_work treatment.
Now that we have SLAB_TYPESAFE_BY_RCU we can simplify this and have
other callers benefit. All of that can be achieved easier is to make
fput() recoginze that case and call file_free() directly.
No need to introduce a special primitive for that. It also allowed
things like failing dentry_open() could benefit from that as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[Christian Brauner <brauner@kernel.org>: massage commit message]
Link: https://lore.kernel.org/r/20231126020834.GC38156@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
Linus Walleij says:
====================
net: dsa: realtek: Two RTL8366RB fixes
These minor fixes were found while digging into other
issues: a weirdly named variable and bogus MTU handling.
Fix it up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
====================
Link: https://lore.kernel.org/r/20231209-rtl8366rb-mtu-fix-v1-0-df863e2b2b2a@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MTU callbacks are in layer 1 size, so for example 1500
bytes is a normal setting. Cache this size, and only add
the layer 2 framing right before choosing the setting. On
the CPU port this will however include the DSA tag since
this is transmitted from the parent ethernet interface!
Add the layer 2 overhead such as ethernet and VLAN framing
and FCS before selecting the size in the register.
This will make the code easier to understand.
The rtl8366rb_max_mtu() callback returns a bogus MTU
just subtracting the CPU tag, which is the only thing
we should NOT subtract. Return the correct layer 1
max MTU after removing headers and checksum.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the stall model, invalid transactions were expected to be
stalled and aborted by the IOPF handler.
However, when killing a test case with a huge amount of data, the
accelerator streamline can not stop until all data is consumed
even if the page fault handler reports errors. As a result, the
kill may take a long time, about 10 seconds with numerous iopf
interrupts.
So disable stall for quiet_cd in the non-force stall model, since
force stall model (STALL_MODEL==0b10) requires CD.S must be 1.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20231206005727.46150-1-zhangfei.gao@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
If the IOMMU has a power domain then some state will be lost in
qcom_iommu_suspend and TZ will reset device if we don't call
qcom_scm_restore_sec_cfg before accessing it again.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca@z3ntu.xyz: reword commit message a bit]
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231011-msm8953-iommu-restore-v1-1-48a0c93809a2@z3ntu.xyz
Signed-off-by: Will Deacon <will@kernel.org>
Add the QCM2290 MDSS compatible to clients compatible list, as it also
needs the workarounds.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-5-4cbb567743bb@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
In some cases the firmware expects cbndx 1 to be assigned to the GMU,
so we also want the default domain for the GMU to be an identy domain.
This way it does not get a context bank assigned. Without this, both
of_dma_configure() and drm/msm's iommu_domain_attach() will trigger
allocating and configuring a context bank. So GMU ends up attached to
both cbndx 1 and later cbndx 2. This arrangement seemingly confounds
and surprises the firmware if the GPU later triggers a translation
fault, resulting (on sc8280xp / lenovo x13s, at least) in the SMMU
getting wedged and the GPU stuck without memory access.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20231210180655.75542-1-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>