Commit graph

1,264,717 commits

Author SHA1 Message Date
Johannes Berg
d02a12b8e4 wifi: cfg80211: add BSS usage reporting
Sometimes there may be reasons for which a BSS that's
actually found in scan cannot be used to connect to,
for example a nonprimary link of an NSTR mobile AP MLD
cannot be used for normal direct connections to it.

Not indicating these to userspace as we do now of course
avoids being able to connect to them, but it's better if
they're shown to userspace and it can make an appropriate
decision, without e.g. doing an additional ML probe.

Thus add an indication of what a BSS can be used for,
currently "normal" and "MLD link", including a reason
bitmap for it being not usable.

The latter can be extended later for certain BSSes if there
are other reasons they cannot be used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.0464f25e0b1d.I9f70ca9f1440565ad9a5207d0f4d00a20cca67e7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:37:00 +01:00
Emmanuel Grumbach
32dc0f8edc wifi: iwlwifi: mvm: do not send STA_DISABLE_TX_CMD for newer firmware
Newest firmware has completely offloaded this logic and this command
will be deprecated soon. Based on a capability bit advertised by the
firmware, skip this command.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.e64ef70c0133.I9f47cdef2ba45f1f383b70023857376973de3a8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:37:00 +01:00
Johannes Berg
14c1b6f430 wifi: iwlwifi: remove async command callback
There's only one user of this code, which is STA unblock
during sleep for uAPSD on really old devices. Instead of
having this all through the API with calls up and down,
just implemented a special-case CMD_BLOCK_TXQS flag for
this, it's only needed in the old gen1 transport.

While at it, fix a complain that lockdep would have, as
we lock the cmd queue and then the TXQs in the reclaim
by using spin_lock_nested(). We no longer need to disable
BHs in iwl_trans_pcie_block_txq_ptrs() since it's called
with them disabled already.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.2bd95e0570fc.I16486dbc82570d2f73a585872f5394698627310d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:37:00 +01:00
Johannes Berg
ed44bab6ba wifi: iwlwifi: fw: file: don't use [0] for variable arrays
This causes fortify warnings when compiled against recent kernels
with recent compilers, and generally is not supported in the kernel
anymore.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.367a2c77b9be.I4964ec8ca1d30c7c3163f9873814c8205a1a14eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:37:00 +01:00
Johannes Berg
de9131b7e2 wifi: iwlwifi: pcie: get_crf_id() can be void
This never returns an error and the return value is never
checked anyway, so it can just be void.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.898b7e99206f.I61378115093fe70e6f5baca7f334651e4190eb3b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:37:00 +01:00
Johannes Berg
79a5d10135 wifi: iwlwifi: pcie: dump CSRs before removal
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.a0e2198e9afd.I3bf737ba5ec1b3013218001e808f6bae0c834543@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:37:00 +01:00
Johannes Berg
47b17879f9 wifi: iwlwifi: pcie: clean up device removal work
We shouldn't access the device if we don't hold a reference,
and if - after locking - we see that it has no bus, we also
can't do anything, in fact, pci_stop_and_remove_bus_device()
will be a no-op.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.6c0879e695f7.I1d3ce75ecad32a4cbf1b9dad61bfb7bc7821fdd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:37:00 +01:00
Emmanuel Grumbach
268712dc3b wifi: iwlwifi: mvm: add a debugfs hook to clear the monitor data
This can be used by the user space when it wants to clear the data we
collected so far for privacy reasons.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.d5e97d5ec0d9.I7a5e836e6109e1fce7e6301dba8d1f28e60a5440@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:59 +01:00
Johannes Berg
1261fefa64 wifi: iwlwifi: refactor RX tracing
When there's not going to be any data in the data event, we
don't need to add it at all (unlike the TX version, it has
no data at all.)

Also combine the tracing into a separate inline so we only
call iwl_rx_trace_len() once, which also simplifies things,
and lets us have a single place to later add other checks.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.13325a4848d2.Ic9e7d794fc4aebfe5ac5136b539ee62789f210f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:59 +01:00
Miri Korenblit
637bbd5b3c wifi: iwlwifi: don't support triggered EHT CQI feedback
EHT CQI is one of the EHT PHY capabilities. We don't support EHT CQI.
The non-triggered CQI feedback bit was unset in a previous patch,
but the triggered CQI feedback bit wasn't. Unset it.

Fixes: 0e21ec6edb ("wifi: iwlwifi: nvm: Update EHT capabilities for GL device")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.092528daf59e.I5715769490835819beddb00c91bbc9e806e170cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:59 +01:00
Ilan Peer
3a5a5cb067 wifi: iwlwifi: mvm: Correctly report TSF data in scan complete
For an MLO connection, the BSSID of the link used during the scanning
should be used (and not the one from the default link).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.1e67dba640c1.I6c4941bfab3a04498370e58b402c64d990c39fbf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:59 +01:00
Ilan Peer
85e7f82358 wifi: iwlwifi: mvm: Use the link ID provided in scan request
If a valid link ID was provided in the scan request use it instead
of picking one of the active links.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.84e21c01b79d.Ib5f546d35542c6c561f5b944c08c9b1850f44146@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:59 +01:00
Vinayak Yadawad
aa0887c4f1 wifi: nl80211: Extend del pmksa support for SAE and OWE security
Current handling of del pmksa with SSID is limited to FILS
security. In the current change the del pmksa support is extended
to SAE/OWE security offloads as well. For OWE/SAE offloads, the
PMK is generated and cached at driver/FW, so user app needs the
capability to request cache deletion based on SSID for drivers
supporting SAE/OWE offload.

Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://msgid.link/ecdae726459e0944c377a6a6f6cb2c34d2e057d0.1701262123.git.vinayak.yadawad@broadcom.com
[drop whitespace-damaged rdev_ops pointer completely, enabling tracing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:59 +01:00
Dmitry Antipov
ea855f0b38 wifi: mac80211: cleanup airtime arithmetic with ieee80211_sta_keep_active()
Prefer native jiffies-wide 'unsigned long' for the 'last_active' field of
'struct airtime_info' and introduce 'ieee80211_sta_keep_active()' for airtime
check in 'ieee80211_txq_keep_active()' and 'ieee80211_sta_register_airtime()'.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://msgid.link/20231206060935.612241-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:59 +01:00
Evan Quan
d34be4310c wifi: mac80211: Add support for WBRF features
To support the WBRF mechanism, Wifi adapters utilized in the system must
register the frequencies in use (or unregister those frequencies no longer
used) via the dedicated calls. So that, other drivers responding to the
frequencies can take proper actions to mitigate possible interference.

Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Link: https://msgid.link/20231211100630.2170152-5-Jun.Ma2@amd.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:59 +01:00
Evan Quan
10fa22b6fb wifi: cfg80211: expose nl80211_chan_width_to_mhz for wide sharing
The newly added WBRF feature needs this interface for channel
width calculation.

Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/20231211100630.2170152-4-Jun.Ma2@amd.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:36:56 +01:00
Herve Codina
7a2ee1576d soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime
Introduce qmc_chan_{get,set}_ts_info() function to allow timeslots
modification at runtime.

The modification is provided using qmc_chan_set_ts_info() and will be
applied on next qmc_chan_start().
qmc_chan_set_ts_info() must be called with the channel rx and/or tx
stopped.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-18-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
0d75119d08 soc: fsl: cpm1: qmc: Remove timeslots handling from setup_chan()
Timeslots setting is done at channel start() and stop().
There is no more need to do that during setup_chan().

Simply remove timeslot setting from setup_chan().

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-17-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
7cc9bda9c1 soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop()
In order to support runtime timeslot route changes, enable the
channel timeslot entries at channel start() and disable them at
channel stop().

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-16-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
0e85feacc8 soc: fsl: cpm1: qmc: Introduce is_tsa_64rxtx flag
In order to support runtime timeslot route changes, some operations will
be different according the routing table used (common Rx and Tx table or
one table for Rx and one for Tx).

The is_tsa_64rxtx flag is introduced to avoid extra computation to
determine the table format each time we need it.
It is set once at initialization.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-15-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
32881b253c soc: fsl: cpm1: qmc: Split Tx and Rx TSA entries setup
The Tx and Rx entries for a given channel are set in one function.

In order to modify Rx entries and Tx entries independently of one other,
split this function in one for the Rx part and one for the Tx part.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-14-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
9217161115 soc: fsl: cpm1: qmc: Add support for disabling channel TSA entries
In order to allow runtime timeslot route changes, disabling channel TSA
entries needs to be supported.

Add support for this new feature.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-13-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
f2deea16bf soc: fsl: cpm1: qmc: Check available timeslots in qmc_check_chans()
The timeslots checked in qmc_check_chans() are the timeslots used.
With the introduction of the available timeslots, the used timeslots
are a subset of the available timeslots. The timeslots checked during
the qmc_check_chans() call should be the available ones.

Simply update and check the available timeslots instead of the used
timeslots in qmc_check_chans().

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-12-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
b1891c1364 soc: fsl: cpm1: qmc: Remove no more needed checks from qmc_check_chans()
The newly introduced qmc_chan_setup_tsa* functions check that the
channel entries are not already used.
These checks are also performed by qmc_check_chans() and are no more
needed.

Remove them from qmc_check_chans().

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-11-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
6f9b814d37 soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa*
Introduce the qmc_chan_setup_tsa* functions to setup entries related
to the given channel.
Use them during QMC channels setup.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-10-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
2d965e25fa soc: fsl: cpm1: qmc: Rename qmc_setup_tsa* to qmc_init_tsa*
qmc_setup_tsa* are called once at initialisation.
They initialize the QMC TSA table.
In order to introduce setup function later on for dynamic timeslots
management, rename the function to avoid later confusion.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-9-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
9b7a69d0bd soc: fsl: cpm1: qmc: Introduce available timeslots masks
Available timeslots masks define timeslots available for the related
channel. These timeslots are defined by the QMC binding.

Timeslots used are initialized to available timeslots but can be a
subset of available timeslots.
This prepares the dynamic timeslots management (ie. changing timeslots
at runtime).

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-8-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
ba3b7e4753 soc: fsl: cpm1: qmc: Add support for child devices
QMC child devices support is needed to avoid orphan DT nodes that use a
simple DT phandle to reference a QMC channel.

Allow to instantiate child devices and also extend the API to get the
qmc_chan using a child device.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231205152116.122512-7-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
48490dc367 soc: fsl: cpm1: qmc: Remove inline function specifiers
The inline function specifier is present on some functions but it is
better to let the compiler decide inlining or not these functions.

Remove inline specifiers.

Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-6-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
0e034aec5b soc: fsl: cpm1: qmc: Extend the API to provide Rx status
In HDLC mode, some status flags related to the data read transfer can be
set by the hardware and need to be known by a QMC consumer for further
analysis.

Extend the API in order to provide these transfer status flags at the
read complete() call.

In TRANSPARENT mode, these flags have no meaning. Keep only one read
complete() API and update the consumers working in transparent mode.
In this case, the newly introduced flags parameter is simply unused.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-5-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
dfe66d012a soc: fsl: cpm1: qmc: Fix rx channel reset
The qmc_chan_reset_rx() set the is_rx_stopped flag. This leads to an
inconsistent state in the following sequence.
    qmc_chan_stop()
    qmc_chan_reset()
Indeed, after the qmc_chan_reset() call, the channel must still be
stopped. Only a qmc_chan_start() call can move the channel from stopped
state to started state.

Fix the issue removing the is_rx_stopped flag setting from
qmc_chan_reset()

Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-4-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
a5ec3a2122 soc: fsl: cpm1: qmc: Fix __iomem addresses declaration
Running sparse (make C=1) on qmc.c raises a lot of warning such as:
  ...
  warning: incorrect type in assignment (different address spaces)
     expected struct cpm_buf_desc [usertype] *[noderef] __iomem bd
     got struct cpm_buf_desc [noderef] [usertype] __iomem *txbd_free
  ...

Indeed, some variable were declared 'type *__iomem var' instead of
'type __iomem *var'.

Use the correct declaration to remove these warnings.

Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-3-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Herve Codina
fc0c64154e soc: fsl: cpm1: tsa: Fix __iomem addresses declaration
Running sparse (make C=1) on tsa.c raises a lot of warning such as:
  --- 8< ---
  warning: incorrect type in assignment (different address spaces)
     expected void *[noderef] si_regs
     got void [noderef] __iomem *
  --- 8< ---

Indeed, some variable were declared 'type *__iomem var' instead of
'type __iomem *var'.

Use the correct declaration to remove these warnings.

Fixes: 1d4ba0b81c ("soc: fsl: cpm1: Add support for TSA")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312051959.9YdRIYbg-lkp@intel.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-2-herve.codina@bootlin.com
2023-12-12 10:29:20 +01:00
Will Deacon
5ca8ab5508 drivers/perf: arm_dsu_pmu: Remove kerneldoc-style comment syntax
For some reason, the Arm DSU PMU driver uses kerneldoc-style comment
syntax (i.e. /** ) for non-kerneldoc comments. This makes the robots
very angry indeed, so just revert these to normal comments to stop
the noise.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312092000.8ltwotjt-lkp@intel.com/
Signed-off-by: Will Deacon <will@kernel.org>
2023-12-12 09:26:38 +00:00
Christophe JAILLET
79c03ed4b8 drivers/perf: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/85b0b73a1b2f743dd5db15d4765c7685100de27f.1702230488.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Will Deacon <will@kernel.org>
2023-12-12 09:20:38 +00:00
Jason Gunthorpe
bf9cd9fef9 iommu/tegra: Use tegra_dev_iommu_get_stream_id() in the remaining places
This API was defined to formalize the access to internal iommu details on
some Tegra SOCs, but a few callers got missed. Add them.

The helper already masks by 0xFFFF so remove this code from the callers.

Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:18:51 +01:00
Jason Gunthorpe
cdbc723f2d acpi: Do not return struct iommu_ops from acpi_iommu_configure_id()
Nothing needs this pointer. Return a normal error code with the usual
IOMMU semantic that ENODEV means 'there is no IOMMU driver'.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:18:50 +01:00
Jason Gunthorpe
eda1a94caf iommu: Mark dev_iommu_priv_set() with a lockdep
A perfect driver would only call dev_iommu_priv_set() from its probe
callback. We've made it functionally correct to call it from the of_xlate
by adding a lock around that call.

lockdep assert that iommu_probe_device_lock is held to discourage misuse.

Exclude PPC kernels with CONFIG_FSL_PAMU turned on because FSL_PAMU uses a
global static for its priv and abuses priv for its domain.

Remove the pointless stores of NULL, all these are on paths where the core
code will free dev->iommu after the op returns.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:18:49 +01:00
Jason Gunthorpe
64945d1b0e iommu: Mark dev_iommu_get() with lockdep
Allocation of dev->iommu must be done under the
iommu_probe_device_lock. Mark this with lockdep to discourage future
mistakes.

Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:18:48 +01:00
Jason Gunthorpe
5b4ea8b06e iommu/of: Use -ENODEV consistently in of_iommu_configure()
Instead of returning 1 and trying to handle positive error codes just
stick to the convention of returning -ENODEV. Remove references to ops
from of_iommu_configure(), a NULL ops will already generate an error code.

There is no reason to check dev->bus, if err=0 at this point then the
called configure functions thought there was an iommu and we should try to
probe it. Remove it.

Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:18:48 +01:00
Jason Gunthorpe
6ff6e184f1 iommmu/of: Do not return struct iommu_ops from of_iommu_configure()
Nothing needs this pointer. Return a normal error code with the usual
IOMMU semantic that ENODEV means 'there is no IOMMU driver'.

Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:18:47 +01:00
Jason Gunthorpe
4720287c7b iommu: Remove struct iommu_ops *iommu from arch_setup_dma_ops()
This is not being used to pass ops, it is just a way to tell if an
iommu driver was probed. These days this can be detected directly via
device_iommu_mapped(). Call device_iommu_mapped() in the two places that
need to check it and remove the iommu parameter everywhere.

Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:18:45 +01:00
Lu Baolu
7be423336e iommu: Set owner token to SVA domain
Commit a9c362db39 ("iommu: Validate that devices match domains") added
an owner token to the iommu_domain. This token is checked during domain
attachment to RID or PASID through the generic iommu interfaces.

The SVA domains are attached to PASIDs through those iommu interfaces.
Therefore, they require the owner token to be set during allocation.
Otherwise, they fail to attach.

Set the owner token for SVA domains.

Fixes: a9c362db39 ("iommu: Validate that devices match domains")
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231208015314.320663-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:16:32 +01:00
Avraham Stern
ce038edfce wifi: iwlwifi: pcie: avoid a NULL pointer dereference
It possible that while the rx rb is being handled, the transport has
been stopped and re-started. In this case the tx queue pointer is not
yet initialized, which will lead to a NULL pointer dereference.
Fix it.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.cd0898cafd89.I0b84daae753ba9612092bf383f5c6f761446e964@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:14:57 +01:00
Johannes Berg
8c386b166e wifi: mac80211: mesh_plink: fix matches_local logic
During refactoring the "else" here got lost, add it back.

Fixes: c99a89edb1 ("mac80211: factor out plink event gathering")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.795480fa0e0b.I017d501196a5bbdcd9afd33338d342d6fe1edd79@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:14:57 +01:00
Johannes Berg
1fc4a3eec5 wifi: mac80211: mesh: check element parsing succeeded
ieee802_11_parse_elems() can return NULL, so we must
check for the return value.

Fixes: 5d24828d05 ("mac80211: always allocate struct ieee802_11_elems")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.93dea364f3d3.Ie87781c6c48979fb25a744b90af4a33dc2d83a28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:14:57 +01:00
Johannes Berg
98849ba2aa wifi: mac80211: check defragmentation succeeded
We need to check that cfg80211_defragment_element()
didn't return an error, since it can fail due to bad
input, and we didn't catch that before.

Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.8595a6b67fc0.I1225edd8f98355e007f96502e358e476c7971d8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:14:57 +01:00
Johannes Berg
63bafd9d54 wifi: mac80211: don't re-add debugfs during reconfig
If we're doing reconfig, then we cannot add the debugfs
files that are already there from before the reconfig.
Skip that in drv_change_sta_links() during reconfig.

Fixes: d2caad527c ("wifi: mac80211: add API to show the link STAs in debugfs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.88a950f43e16.Id71181780994649219685887c0fcad33d387cc78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:14:57 +01:00
Rouven Czerwinski
23484d8170 net: rfkill: gpio: set GPIO direction
Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.

This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.

Fixes: b2f750c3a8 ("net: rfkill: gpio: prevent value glitch during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:14:57 +01:00
Edward Adam Davis
c1393c132b wifi: mac80211: check if the existing link config remains unchanged
[Syz report]
WARNING: CPU: 1 PID: 5067 at net/mac80211/rate.c:48 rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48
Modules linked in:
CPU: 1 PID: 5067 Comm: syz-executor413 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48
Code: 48 c7 c2 00 46 0c 8c be 08 03 00 00 48 c7 c7 c0 45 0c 8c c6 05 70 79 0b 05 01 e8 1b a0 6f f7 e9 e0 fd ff ff e8 61 b3 8f f7 90 <0f> 0b 90 e9 36 ff ff ff e8 53 b3 8f f7 e8 5e 0b 78 f7 31 ff 89 c3
RSP: 0018:ffffc90003c57248 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888016bc4000 RCX: ffffffff89f7d519
RDX: ffff888076d43b80 RSI: ffffffff89f7d6df RDI: 0000000000000005
RBP: ffff88801daaae20 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000001
R13: 0000000000000000 R14: ffff888020030e20 R15: ffff888078f08000
FS:  0000555556b94380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 0000000076d22000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 sta_apply_auth_flags.constprop.0+0x4b7/0x510 net/mac80211/cfg.c:1674
 sta_apply_parameters+0xaf1/0x16c0 net/mac80211/cfg.c:2002
 ieee80211_add_station+0x3fa/0x6c0 net/mac80211/cfg.c:2068
 rdev_add_station net/wireless/rdev-ops.h:201 [inline]
 nl80211_new_station+0x13ba/0x1a70 net/wireless/nl80211.c:7603
 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
 genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
 netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0xd5/0x180 net/socket.c:745
 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

[Analysis]
It is inappropriate to make a link configuration change judgment on an
non-existent and non new link.

[Fix]
Quickly exit when there is a existent link and the link configuration has not
changed.

Fixes: b303835dab ("wifi: mac80211: accept STA changes without link changes")
Reported-and-tested-by: syzbot+62d7eef57b09bfebcd84@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://msgid.link/tencent_DE67FF86DB92ED465489A36ECD2EDDCC8C06@qq.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12 10:14:57 +01:00