The old implementation extracted VLAN TCI info from the payload
before the VLAN tag has been pushed in the payload.
Another problem was that the VLAN TCI was extracted even if the
packet did not have VLAN protocol header.
This resulted in invalid VLAN TCI and as a consequence a random
queue was computed.
This patch fixes the above issues and use the VLAN TCI from the
skb if it is present or VLAN TCI from payload if present. If no
VLAN header is present queue 0 is selected.
Fixes: 52c4a1a85f ("net: fec: add ndo_select_queue to fix TX bandwidth fluctuations")
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In cases where the # is known ahead of time, it is silly to do the table
resize dance.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Patchwork: https://patchwork.freedesktop.org/patch/568338/
Now that it only handles unlock duty, drop the superfluous arg and
rename it.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/568333/
Untangle unpinning from unlock/unref loop. The unpin only happens in
error paths so it is easier to decouple from the normal unlock path.
Since we never have an intermediate state where a subset of buffers
are pinned (ie. we never bail out of the pin or unpin loops) we can
replace the bo state flag bit with a global flag in the submit.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/568335/
We shouldn't be running the job in error cases. This also avoids having
to think too hard about where the objs get unpinned (and if necessary,
the resv takes over tracking that the obj is busy).. ie. error cases it
always happens synchronously, and normal cases it happens from scheduler
job_run() callback.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/568331/
The only point it is called is before pinning objects, so the "unpin"
part of the name is fiction. Just remove it and call submit_cleanup_bo()
directly.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/568330/
This was a small optimization for pre-soft-pin userspace. But mesa
switched to soft-pin nearly 5yrs ago. So lets drop the optimization
and simplify the code.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/568328/
The only A680 referenced from DeviceTree is patch level 1, which since
commit '90b593ce1c ("drm/msm/adreno: Switch to chip-id for identifying
GPU")' isn't a known chip id.
Correct the chip id to allow the A680 to be recognized again.
Fixes: 90b593ce1c ("drm/msm/adreno: Switch to chip-id for identifying GPU")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/569839/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This parameter is programmed by the kernel and influences the tiling
layout of images. Exposing it to userspace will allow it to tile/untile
images correctly without guessing what value the kernel programmed, and
allow us to change it in the future without breaking userspace.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/571181/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Split up calculating configuration parameters and programming them, so
that we can expose them to userspace.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/571180/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Introduce the macro ALT_NOT_XEN as a short form of
ALT_NOT(X86_FEATURE_XENPV).
No functional changes.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231129133332.31043-2-jgross@suse.com
GS101 has three different SYSREG controllers, add dedicated
compatibles for them to the documentation.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231209233106.147416-4-peter.griffin@linaro.org
[krzysztof: move Google entries to existing enum]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Provide dt-schema documentation for Google gs101 SoC clock controller.
Currently this adds support for cmu_top, cmu_misc and cmu_apm.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231209233106.147416-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add gs101-pmu compatible to the bindings documentation.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231209233106.147416-2-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
gs101 is similar to newer Exynos SoCs like Exynos850 and ExynosAutov9
where more than one pin controller can do external wake-up interrupt.
So add a dedicated compatible for it.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231209233106.147416-8-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the "google,gs101-pinctrl" compatible to the dt-schema bindings
documentation.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231209233106.147416-7-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
If DMA is used, burst length should be set to the bus width of the DMA.
Otherwise, the SPI hardware will transmit/receive one word per DMA
request.
Since this issue affects both transmission and reception, it cannot be
detected with a loopback test.
Replace magic numbers 512 and 0xfff with MX51_ECSPI_CTRL_MAX_BURST.
Reported-by Stefan Bigler <linux@bigler.io>
Signed-off-by: Benjamin Bigler <benjamin@bigler.one>
Fixes: 15a6af94a2 ("spi: Increase imx51 ecspi burst length based on transfer length")
Link: https://lore.kernel.org/r/8a415902c751cdbb4b20ce76569216ed@mail.infomaniak.com
Link: https://lore.kernel.org/r/20231209222338.5564-1-benjamin@bigler.one
Signed-off-by: Mark Brown <broonie@kernel.org>
Check !val instead of directing checking for NULL (val == NULL).
No functional changes intended.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-7-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of having an array and keeping IDs for each entry of the array,
just have a chip_info struct per device.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-6-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When reading in_voltage_scale we can get something like:
root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146
However, when reading the available options:
root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010
which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.
While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
are done which means we need to properly protect the whole operation so
we are sure we will be in a sane state if two concurrent calls occur.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-3-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make sure functions that return errors are not ignored.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-2-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The reset gpio was being handled with inverted polarity. This means that
as far as gpiolib is concerned we were actually leaving the pin asserted
(in theory, this would mean reset). However, inverting the polarity in
devicetree made things work. Fix it by doing it the proper way and how
gpiolib expects it to be done.
While at it, moved the handling to it's own function and dropped
'reset_gpio' from the 'struct ad9467_state' as we only need it during
probe. On top of that, refactored things so that we now request the gpio
asserted (i.e in reset) and then de-assert it. Also note that we now use
gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
already request the pin as output.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The HP laptop 15-db0403ng uses the ALC236 codec and controls the mute
LED using COEF 0x07 index 1.
Sound card subsystem: Hewlett-Packard Company Device [103c:84ae]
Use the existing quirk for this model.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e61815d0-f1c7-b164-e49d-6ca84771476a@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec
pins are not registered properly without the force-connect quirk. The
codec will report only one pin as having external connectivity, but i915
finds all three connectors on the system, so the two drivers are not
in sync.
Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231208132127.2438067-3-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add one more older NUC model that requires quirk to force all pins to be
connected. The display codec pins are not registered properly without
the force-connect quirk. The codec will report only one pin as having
external connectivity, but i915 finds all three connectors on the
system, so the two drivers are not in sync.
Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.
Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/issues/3
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231208132127.2438067-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, vdso-image-*.c, vdso*.so, vdso*.so.dbg are not cleaned
because 'make clean' does not include include/config/auto.conf,
resulting in $(vdso_img-y) being empty.
Add the build artifacts to 'targets' unconditionally.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Now compilers can recognize fatal() never returns.
While GCC 4.5 dropped support for -Wunreachable-code, Clang is capable
of detecting the unreachable code.
$ make HOSTCC=clang HOSTCFLAGS=-Wunreachable-code-return
[snip]
HOSTCC scripts/mod/modpost.o
scripts/mod/modpost.c:520:11: warning: 'return' will never be executed [-Wunreachable-code-return]
return 0;
^
scripts/mod/modpost.c:477:10: warning: 'return' will never be executed [-Wunreachable-code-return]
return 0;
^
2 warnings generated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
This initializer was added to avoid -Wmaybe-uninitialized (gcc) and
-Wsometimes-uninitialized (clang) warnings.
Now that compilers recognize fatal() never returns, it is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The function fatal() never returns because modpost_log() calls exit(1)
when LOG_FATAL is passed.
Inform compilers of this fact so that unreachable code flow can be
identified at compile time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
This attribute must be added to the function declaration in a header
for comprehensive checking of all the callsites.
Fixes: 6d9a89ea4b ("kbuild: declare the modpost error functions as printf like")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
When using the -dtbs syntax, you need to list the base first, as
follows:
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo
dtb-y := foo.dtb
You cannot do this arrangement:
foo-dtbs := foo_overlay1.dtbo foo_overlay2.dtbo foo_base.dtb
This restriction comes from $(firstword ...) in the current
implementation, but it is unneeded to rely on the order in the
-dtbs syntax.
Instead, you can simply determine the base by the suffix because
the base (*.dtb) and overlays (*.dtbo) use different suffixes.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
In 2017, the dpkg suite introduced the rootless builds support with the
following commits:
- 2436807c87b0 ("dpkg-deb: Add support for rootless builds")
- fca1bfe84068 ("dpkg-buildpackage: Add support for rootless builds")
This feature is available in the default dpkg on Debian 10 and Ubuntu
20.04.
Remove the old method.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit f50169324d ("module.h: split out the EXPORT_SYMBOL into
export.h") appropriately separated EXPORT_SYMBOL into <linux/export.h>
because modules and EXPORT_SYMBOL are orthogonal; modules are symbol
consumers, while EXPORT_SYMBOL are used by symbol providers, which
may not be necessarily a module.
However, that commit also relocated THIS_MODULE. As explained in the
commit description, the intention was to define THIS_MODULE in a
lightweight header, but I do not believe <linux/export.h> was the
best location because EXPORT_SYMBOL and THIS_MODULE are unrelated.
Move it to another lightweight header, <linux/init.h>. The reason for
choosing <linux/init.h> is to make <linux/moduleparam.h> self-contained
without relying on <linux/linkage.h> incorrectly including
<linux/export.h>.
With this adjustment, the role of <linux/export.h> becomes clearer as
it only defines EXPORT_SYMBOL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
David Vernet says:
====================
Add new bpf_cpumask_weight() kfunc
It can be useful to query how many bits are set in a cpumask. For
example, if you want to perform special logic for the last remaining
core that's set in a mask. This logic is already exposed through the
main kernel's cpumask header as cpumask_weight(), so it would be useful
to add a new bpf_cpumask_weight() kfunc which wraps it and does the
same.
This patch series was built and tested on top of commit 2146f7fe6e
("Merge branch 'allocate-bpf-trampoline-on-bpf_prog_pack'").
====================
Link: https://lore.kernel.org/r/20231207210843.168466-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new bpf_cpumask_weight() kfunc can be used to count the number of
bits that are set in a struct cpumask* kptr. Let's add a selftest to
verify its behavior.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231207210843.168466-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It can be useful to query how many bits are set in a cpumask. For
example, if you want to perform special logic for the last remaining
core that's set in a mask. Let's therefore add a new
bpf_cpumask_weight() kfunc which checks how many bits are set in a mask.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231207210843.168466-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, there are two test cases with same name
"ALU64_SMOD_X: -7 % 2 = -1", the first one is right,
the second one should be ALU64_SMOD_K because its
code is BPF_ALU64 | BPF_MOD | BPF_K.
Before:
test_bpf: #170 ALU64_SMOD_X: -7 % 2 = -1 jited:1 4 PASS
test_bpf: #171 ALU64_SMOD_X: -7 % 2 = -1 jited:1 4 PASS
After:
test_bpf: #170 ALU64_SMOD_X: -7 % 2 = -1 jited:1 4 PASS
test_bpf: #171 ALU64_SMOD_K: -7 % 2 = -1 jited:1 4 PASS
Fixes: daabb2b098 ("bpf/tests: add tests for cpuv4 instructions")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231207040851.19730-1-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU hotplug
while ftrace is active.
Thanks to: Naveen N Rao
-----BEGIN PGP SIGNATURE-----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=RLG4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU
hotplug while ftrace is active.
Thanks to Naveen N Rao.
* tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ftrace: Fix stack teardown in ftrace_no_trace
- fix an error path after a failed export in sysfs code
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmV0wIYACgkQEacuoBRx
13Jt5A//dcrJanDY/ydioCg7FxGWPktQVsquFWELpT+rzVNxGdUTmE/pn3o5axSE
+VdwUg6L4kLO85TZkzo3wvGVgf9gSYDXu/sgBRilF9OTmAPCoZrAjMfIYFEelWCs
n/dk2VfdG+Hbf5S1JuN0svUAmqzW6xrtGXE5enxLPqexWuB+YFhnUmjWZlIMxHYj
MVATWENwFnzl00K1ApXH/Nt0RHa/FRMkTOr3pa7C21tL9s6c4KKq0wLwR9vYLA2e
7wMLKgKhL5jRnjx7PgHL3F/V1AEJzNlPFtmPzvIOz1IQBN5jpsbFfhaI/F6yLuKV
bNT3rrKtMaNfvI/RmVXmTSNdhUg5tmL5y+mC0CBOnoUwVC1/DIlxro0PCO9HM+c0
elACsdm531Wmz95hXmh6YeMaEgD+zehH/5N4pd1U67fSJsJuxjhbRByLhQpNMJCz
AoppNb8zKYoPYOkl8MyCxLEje0dsAy3UFEYvnLTrTDx5UgxrgISDw2PqxFNzav20
AgrQ8NJzLI2tQVyEhf5PZsozEmgNfKZYZYx93fUIVYys17Mfv5W8s2hr0AOVfinz
V/cuqpkfWtATVbLmoBEc86raHz4KKegPs8Q/Kb10xmjtXh76k+Rap4V+/GQjb+Q5
4mhGbttp1WUaY/BVxWKd9myCwhn4sasEYgSUvI1CmVeDCDEqkK4=
=Zzhe
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix an error path after a failed export in sysfs code
* tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: sysfs: Fix error handling on failed export