Commit graph

1,264,717 commits

Author SHA1 Message Date
Al Viro
e9d130d050 make retain_dentry() neutral with respect to refcounting
retain_dentry() used to decrement refcount if and only if it returned
true.  Lift those decrements into the callers.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:33:42 -05:00
Al Viro
6511f6be77 __dput_to_list(): do decrement of refcount in the callers
... and rename it to to_shrink_list(), seeing that it no longer
does dropping any references

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:33:42 -05:00
Al Viro
15f23734a1 fast_dput(): new rules for refcount
By now there is only one place in entire fast_dput() where we return
false; that happens after refcount had been decremented and found (under
->d_lock) to be zero.  In that case, just prior to returning false to
caller, fast_dput() forcibly changes the refcount from 0 to 1.

Lift that resetting refcount to 1 into the callers; later in the series
it will be massaged out of existence.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:33:42 -05:00
Al Viro
504e08cebe fast_dput(): handle underflows gracefully
If refcount is less than 1, we should just warn, unlock dentry and
return true, so that the caller doesn't try to do anything else.

Taking care of that leaves the rest of "lockref_put_return() has
failed" case equivalent to "decrement refcount and rejoin the
normal slow path after the point where we grab ->d_lock".

NOTE: lockref_put_return() is strictly a fastpath thing - unlike
the rest of lockref primitives, it does not contain a fallback.
Caller (and it looks like fast_dput() is the only legitimate one
in the entire kernel) has to do that itself.  Reasons for
lockref_put_return() failures:
	* ->d_lock held by somebody
	* refcount <= 0
	* ... or an architecture not supporting lockref use of
cmpxchg - sparc, anything non-SMP, config with spinlock debugging...

We could add a fallback, but it would be a clumsy API - we'd have
to distinguish between:
	(1) refcount > 1 - decremented, lock not held on return
	(2) refcount < 1 - left alone, probably no sense to hold the lock
	(3) refcount is 1, no cmphxcg - decremented, lock held on return
	(4) refcount is 1, cmphxcg supported - decremented, lock *NOT* held
	    on return.
We want to return with no lock held in case (4); that's the whole point of that
thing.  We very much do not want to have the fallback in case (3) return without
a lock, since the caller might have to retake it in that case.
So it wouldn't be more convenient than doing the fallback in the caller and
it would be very easy to screw up, especially since the test coverage would
suck - no way to test (3) and (4) on the same kernel build.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:33:42 -05:00
Al Viro
15220fbf18 fast_dput(): having ->d_delete() is not reason to delay refcount decrement
->d_delete() is a way for filesystem to tell that dentry is not worth
keeping cached.  It is not guaranteed to be called every time a dentry
has refcount drop down to zero; it is not guaranteed to be called before
dentry gets evicted.  In other words, it is not suitable for any kind
of keeping track of dentry state.

None of the in-tree filesystems attempt to use it that way, fortunately.

So the contortions done by fast_dput() (as well as dentry_kill()) are
not warranted.  fast_dput() certainly should treat having ->d_delete()
instance as "can't assume we'll be keeping it", but that's not different
from the way we treat e.g. DCACHE_DONTCACHE (which is rather similar
to making ->d_delete() returns true when called).

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:33:42 -05:00
Al Viro
cd9f84f35c shrink_dentry_list(): no need to check that dentry refcount is marked dead
... we won't see DCACHE_MAY_FREE on anything that is *not* dead
and checking d_flags is just as cheap as checking refcount.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:33:41 -05:00
Al Viro
3fcf535626 centralize killing dentry from shrink list
new helper unifying identical bits of shrink_dentry_list() and
shring_dcache_for_umount()

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:33:41 -05:00
Al Viro
da549bdd15 dentry: switch the lists of children to hlist
Saves a pointer per struct dentry and actually makes the things less
clumsy.  Cleaned the d_walk() and dcache_readdir() a bit by use
of hlist_for_... iterators.

A couple of new helpers - d_first_child() and d_next_sibling(),
to make the expressions less awful.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:32:13 -05:00
Al Viro
b31559f8e4 coda_flag_children(): cope with dentries turning negative
->d_lock on parent does not stabilize ->d_inode of child.
We don't do much with that inode in there, but we need
at least to avoid struct inode getting freed under us...

[rcu_read_lock() is not needed here, since parent's ->d_lock
provides an rcu-critical area]

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-11-25 02:31:04 -05:00
Jiri Slaby (SUSE)
ab58841ab9 tty: srmcons: use 'buf' directly in srmcons_do_write()
There is no need to have a separate iterator ('cur') through 'buf' in
srmcons_do_write(). 'buf' can be used directly which simplifies the code
a bit.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-alpha@vger.kernel.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20231121092258.9334-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:18 +00:00
Jiri Slaby (SUSE)
2bf93a48cc tty: nozomi: remove unused debugging DUMP()
DUMP()'s only use is commented out. Remove the macro completely along
with this unused use.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231121092258.9334-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
7588b08203 tty: hvc_console: use flexible array for outbuf
This means:
* move outbuf to the end of struct hvc_struct and convert from pointer
  to flexible array (the structure is smaller now)
* use struct_size() at the allocation site
* align outbuf in the struct instead of ALIGN() at kzalloc()

And apart from the above, use u8 instead of char (which are the same
thanks to -funsigned-char). The former is now preferred over the latter.

It makes the code easier to understand.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231121092258.9334-12-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
4ccef1f142 tty: hso: don't initialize global serial_table
'serial_table' is global, so there is no need to initialize it to NULLs
at the module load. Drop this unneeded for loop.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231121092258.9334-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
e4b3cd3b6a tty: hso: don't emit load/unload info to the log
It's preferred NOT to emit anything during the module load and unload
(in case the un/load was successful). So drop these prints from hso
along with global 'version'. It even contains no version after all.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231121092258.9334-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
7cf61de7f7 tty: goldfish: drop unneeded temporary variables
We can pass 'buf' directly to goldfish_tty_rw() using simple (unsigned
long) cast. There is no need to obfuscate the code by another variable
with double casts.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231121092258.9334-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
9d3e3301ae tty: ehv_bytecha: use memcpy_and_pad() in local_ev_byte_channel_send()
There is a helper for memcpy(buffer)+memset(the_rest). Use it for
simplicity.

And add a comment why we are doing the copy in the first place.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231121092258.9334-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
73b2ed3675 tty: amiserial: use bool and rename overrun flag in receive_chars()
'oe' is a yes-no flag, switch it to boolean. And rename to overrun. All
for the code to be more obvious.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231121092258.9334-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
c35e6ec1f3 tty: amiserial: return from receive_chars() without goto
The 'out' label is just before 'return'. So return immediately and drop
both the label and the return. This makes the code more straightforward.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231121092258.9334-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
239123e7e8 tty: move locking docs out of Returns for functions in tty.h
Both tty_kref_get() and tty_get_baud_rate() note about locking in their
Return kernel-doc clause. Extract this info into a separate "Locking"
paragraph -- the same as we do for other tty functions.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231121092258.9334-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
d22d53ad8a tty: remove unneeded mbz from tiocsti()
'mbz' in tiocsti() is used only to pass TTY_NORMAL to
tty_ldisc_ops::receive_buf(). But that can be achieved easier by simply
passing NULL to ::receive_buf().

So drop this 'mbz'.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231121092258.9334-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
4c74253b83 tty: deprecate tty_write_message()
tty_write_message() has only one user: quotas. In particular, there the
use depends on CONFIG_PRINT_QUOTA_WARNING. And that is deprecated and
marked as BROKEN already too.

So make tty_write_message() dependent on that very config option. This
action in fact drops tty_write_message() from the vmlinux binary. Good
riddance.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Jan Kara <jack@suse.com>
Acked-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231121092258.9334-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Jiri Slaby (SUSE)
358779dd18 tty: fix tty_operations types in documentation
Commits 95713967ba ("tty: make tty_operations::write()'s count
size_t") and dcaafbe6ee ("tty: propagate u8 data to
tty_operations::put_char()") changed types of characters to u8, but
omitted to fix the documentation.

Fix the latter now.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231121092258.9334-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:17 +00:00
Hugo Villeneuve
1be5f0819c serial: max310x: change confusing comment about Tx FIFO
The comment wording can be confusing, as txlen will return the number of
bytes available in the FIFO, which can be less than the maximum theoretical
Tx FIFO size.

Change the comment so that it is unambiguous.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231122175957.3875102-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Hugo Villeneuve
fffa35a25b serial: sc16is7xx: change confusing comment about Tx FIFO
The comment wording can be confusing, as txlen will return the number of
bytes available in the FIFO, which can be less than the maximum theoretical
Tx FIFO size.

Change the comment so that it is unambiguous.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231122175859.3874753-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Tony Lindgren
45a3a8ef81 serial: core: Revert checks for tx runtime PM state
This reverts commit 81a61051e0.

With tty and serdev controller moved to be children of the serial core
port device, runtime PM usage count of the serdev controller now
propagates to the serial hardware controller parent device as expected.

Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231113080758.30346-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Tony Lindgren
b286f4e87e serial: core: Move tty and serdev to be children of serial core port device
Let's move tty and serdev controller to be children of the serial core port
device. This way the runtime PM usage count of a child device propagates
to the serial hardware device.

The tty and serdev devices are associated with a specific serial port of
a serial hardware controller device, and we now have serial core hierarchy
of controllers and ports.

The tty device moves happily with just a change of the parent device and
update of device_find_child() handling. The serdev device init needs some
changes to separate the serial hardware controller device from the parent
device.

With this change the tty devices move under sysfs similar to this x86_64
qemu example of a diff of "find /sys -name ttyS*":

 /sys/class/tty/ttyS0
 /sys/class/tty/ttyS3
 /sys/class/tty/ttyS1
-/sys/devices/pnp0/00:04/tty/ttyS0
-/sys/devices/platform/serial8250/tty/ttyS2
-/sys/devices/platform/serial8250/tty/ttyS3
-/sys/devices/platform/serial8250/tty/ttyS1
+/sys/devices/pnp0/00:04/00:04:0/00:04:0.0/tty/ttyS0
+/sys/devices/platform/serial8250/serial8250:0/serial8250:0.3/tty/ttyS3
+/sys/devices/platform/serial8250/serial8250:0/serial8250:0.1/tty/ttyS1
+/sys/devices/platform/serial8250/serial8250:0/serial8250:0.2/tty/ttyS2

If a serdev device is used instead of a tty, it moves in a similar way.

Suggested-by: Johan Hovold <johan@kernel.org>
Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231113080758.30346-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Tomas Mudrunka
39ff20f5fd /proc/sysrq-trigger: accept multiple keys at once
This way we can do:
`echo _reisub > /proc/sysrq-trigger`
Instead of:
`for i in r e i s u b; do echo "$i" > /proc/sysrq-trigger; done;`

This can be very useful when trying to execute sysrq combo remotely
or from userspace. When sending keys in multiple separate writes,
userspace (eg. bash or ssh) can be killed before whole combo is completed.
Therefore putting all keys in single write is more robust approach.

Signed-off-by: Tomas Mudrunka <tomas.mudrunka@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231120111451.527952-1-tomas.mudrunka@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Manikanta Guntupalli
01c33b8138 serial: uartlite: Use dynamic allocation for major number when uart ports > 4
Device number 204 has a range of minors on major number.
uart_register_driver is failing due to lack of minor numbers
when more number of uart ports used. So, to avoid minor number
limitation on 204 major number use dynamic major allocation
when more than 4 uart ports used otherwise use static major
allocation.

https://docs.kernel.org/arch/arm/sa1100/serial_uart.html

Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Link: https://lore.kernel.org/r/20231116134003.3762725-3-manikanta.guntupalli@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Manikanta Guntupalli
0be916a68c Documentation: devices.txt: Update ttyUL major number allocation details
Describe when uartlite driver uses static/dynamic allocation for major
number based on maximum number of uartlite serial ports.

Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Link: https://lore.kernel.org/r/20231116134003.3762725-2-manikanta.guntupalli@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Philipp Stanner
e651faa2fb drivers/tty/vt: use standard array-copy-functions
tty/vt currently uses memdup_user() and vmemdup_array_user() to copy
userspace arrays.

Whereas there is no danger of overflowing, the call to vmemdup_user()
currently utilizes array_size() to calculate the array size
nevertheless. This is not useful because array_size() would return
SIZE_MAX and pass it to vmemdup_user() in case of (the impossible)
overflow.

string.h from the core-API now provides the wrappers memdup_array_user()
and vmemdup_array_user() to copy userspace arrays in a standardized
manner. Additionally, they also perform generic overflow-checks.

Use these wrappers to make it more obvious and readable that arrays are
being copied.

As we are at it, remove two unnecessary empty lines.

Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20231103111207.74621-2-pstanner@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Uwe Kleine-König
727e08b1a5 serial: xilinx_uartps: Fix kernel doc about .remove()'s return code
Since the driver was converted to use .remove_new() the return function
doesn't return a value any more. So remove the obsolete documentation
about the return value.

Reported-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20231117101236.878008-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-25 07:23:16 +00:00
Luben Tuikov
38f922a563 drm/sched: Reverse run-queue priority enumeration
Reverse run-queue priority enumeration such that the higest priority is now 0,
and for each consecutive integer the prioirty diminishes.

Run-queues correspond to priorities. To an external observer a scheduler
created with a single run-queue, and another created with
DRM_SCHED_PRIORITY_COUNT number of run-queues, should always schedule
sched->sched_rq[0] with the same "priority", as that index run-queue exists in
both schedulers, i.e. a scheduler with one run-queue or many. This patch makes
it so.

In other words, the "priority" of sched->sched_rq[n], n >= 0, is the same for
any scheduler created with any allowable number of run-queues (priorities), 0
to DRM_SCHED_PRIORITY_COUNT.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-6-ltuikov89@gmail.com
2023-11-24 23:03:53 -05:00
Luben Tuikov
fe375c7480 drm/sched: Rename priority MIN to LOW
Rename DRM_SCHED_PRIORITY_MIN to DRM_SCHED_PRIORITY_LOW.

This mirrors DRM_SCHED_PRIORITY_HIGH, for a list of DRM scheduler priorities
in ascending order,
  DRM_SCHED_PRIORITY_LOW,
  DRM_SCHED_PRIORITY_NORMAL,
  DRM_SCHED_PRIORITY_HIGH,
  DRM_SCHED_PRIORITY_KERNEL.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-5-ltuikov89@gmail.com
2023-11-24 23:03:53 -05:00
Luben Tuikov
2bbe6ab2be drm/sched: Fix bounds limiting when given a malformed entity
If we're given a malformed entity in drm_sched_entity_init()--shouldn't
happen, but we verify--with out-of-bounds priority value, we set it to an
allowed value. Fix the expression which sets this limit.

Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Fixes: 56e449603f ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Link: https://patchwork.freedesktop.org/patch/msgid/20231123122422.167832-2-ltuikov89@gmail.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/dbb91dbe-ef77-4d79-aaf9-2adb171c1d7a@amd.com
2023-11-24 22:56:57 -05:00
Martin K. Petersen
6bae38ddd3 Merge patch series "scsi: arcmsr: support Areca ARC-1688 Raid controller"
Driver update from ching Huang <ching2048@areca.com.tw>.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 21:24:38 -05:00
ching Huang
56610811cc scsi: arcmsr: Update driver version to v1.51.00.14-20230915
Signed-off-by: ching Huang <ching2048@areca.com.tw>
Link: https://lore.kernel.org/r/514898a472dfdf0502afe27d127ed5145a1fb915.camel@areca.com.tw
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 21:23:36 -05:00
ching Huang
41c8a1a1e9 scsi: arcmsr: Support new PCI device IDs 1883 and 1886
Add support for Areca RAID controllers with PCI device IDs 1883 and 1886.

Signed-off-by: ching Huang <ching2048@areca.com.tw>
Link: https://lore.kernel.org/r/7732e743eaad57681b1552eec9c6a86c76dbe459.camel@areca.com.tw
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 21:22:29 -05:00
ching Huang
14ef4b001a scsi: arcmsr: Support new RAID controller ARC-1688
Add support for new Areca RAID controller ARC-1688

Signed-off-by: ching Huang <ching2048@areca.com.tw>
Link: https://lore.kernel.org/r/110bdc873497d3d5e090b908fb159b6155bb3a2b.camel@areca.com.tw
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 21:20:49 -05:00
Jakub Kicinski
53775da0b4 Merge branch 'firmware_loader'
Kory says:

====================
This patch was initially submitted as part of a net patch series.
Conor expressed interest in using it in a different subsystem.
https://lore.kernel.org/netdev/20231116-feature_poe-v1-7-be48044bf249@bootlin.com/

Consequently, I extracted it from the series and submitted it separately.
I first tried to send it to driver-core but it seems also not the best
choice:
https://lore.kernel.org/lkml/2023111720-slicer-exes-7d9f@gregkh/
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-24 18:11:55 -08:00
Kory Maincent
a066f906ba firmware_loader: Expand Firmware upload error codes with firmware invalid error
No error code are available to signal an invalid firmware content.
Drivers that can check the firmware content validity can not return this
specific failure to the user-space

Expand the firmware error code with an additional code:
- "firmware invalid" code which can be used when the provided firmware
  is invalid

Sync lib/test_firmware.c file accordingly.

Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231122-feature_firmware_error_code-v3-1-04ec753afb71@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-24 18:09:19 -08:00
Abhinav Singh
f38d4eda25 scsi: dc395x: Fix warning using plain integer as NULL
Sparse static analysis tool generates a warning with this message "Using
plain integer as NULL pointer". Fix it.

Signed-off-by: Abhinav Singh <singhabhinav9051571833@gmail.com>
Link: https://lore.kernel.org/r/20231109215049.1466431-1-singhabhinav9051571833@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 21:08:23 -05:00
Martin K. Petersen
130fbf45f4 Merge patch series "mpi3mr: Add support for Broadcom SAS5116 IO/RAID controllers"
Sumit Saxena <sumit.saxena@broadcom.com> says:

These patches add support for Broadcom's SAS5116 IO/RAID controllers
in mpi3mr driver.

Link: https://lore.kernel.org/r/20231123160132.4155-1-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:55:24 -05:00
Sumit Saxena
b4d94164ff scsi: mpi3mr: driver version upgrade to 8.5.0.0.50
Update driver version to 8.5.0.0.50.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-6-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:53:05 -05:00
Sumit Saxena
1193a89d2b scsi: mpi3mr: Add support for status reply descriptor
Inform controller firmware that driver supports status reply descriptor.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-5-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:53:05 -05:00
Sumit Saxena
cb5b608946 scsi: mpi3mr: Increase maximum number of PHYs to 64 from 32
SAS5116 controllers supports maximum 48 physical PHYs. Modify driver to
accommodate up to 64 PHYs (though current need is to support 48 PHYs).

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-4-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:53:05 -05:00
Sumit Saxena
c9260ff28e scsi: mpi3mr: Add PCI checks where SAS5116 diverges from SAS4116
Add PCI IDs checks for the cases where SAS5116 diverges from SAS4116 in
behavior.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-3-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:53:05 -05:00
Sumit Saxena
6fa21eab82 scsi: mpi3mr: Add support for SAS5116 PCI IDs
Add support for Broadcom's SAS5116 IO/RAID controllers PCI IDs.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-2-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:53:05 -05:00
Damien Le Moal
b09d7f8fd5 scsi: sd: Fix system start for ATA devices
It is not always possible to keep a device in the runtime suspended state
when a system level suspend/resume cycle is executed. E.g. for ATA devices
connected to AHCI adapters, system resume resets the ATA ports, which
causes connected devices to spin up. In such case, a runtime suspended disk
will incorrectly be seen with a suspended runtime state because the device
is not resumed by sd_resume_system(). The power state seen by the user is
different than the actual device physical power state.

Fix this issue by introducing the struct scsi_device flag
force_runtime_start_on_system_start. When set, this flag causes
sd_resume_system() to request a runtime resume operation for runtime
suspended devices. This results in the user seeing the device runtime_state
as active after a system resume, thus correctly reflecting the device
physical power state.

Fixes: 9131bff6a9 ("scsi: core: pm: Only runtime resume if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:44:21 -05:00
Damien Le Moal
6371be7aeb scsi: Change SCSI device boolean fields to single bit flags
Commit 3cc2ffe5c1 ("scsi: sd: Differentiate system and runtime start/stop
management") changed the single bit manage_start_stop flag into 2 boolean
fields of the SCSI device structure. Commit 24eca2dce0 ("scsi: sd:
Introduce manage_shutdown device flag") introduced the manage_shutdown
boolean field for the same structure. Together, these 2 commits increase
the size of struct scsi_device by 8 bytes by using booleans instead of
defining the manage_xxx fields as single bit flags, similarly to other
flags of this structure.

Avoid this unnecessary structure size increase and be consistent with the
definition of other flags by reverting the definitions of the manage_xxx
fields as single bit flags.

Fixes: 3cc2ffe5c1 ("scsi: sd: Differentiate system and runtime start/stop management")
Fixes: 24eca2dce0 ("scsi: sd: Introduce manage_shutdown device flag")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:44:21 -05:00
Peter Wang
93e6c0e19d scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode
In MCQ mode, if cmd is pending in device and abort succeeds, response will
not be returned by device. So we need clear the cmd, otherwise timeout will
happen and next time we use same tag we will get a WARN_ON(lrbp->cmd).

Below is error log:

  <3>[ 2277.447611][T21376] ufshcd-mtk 112b0000.ufshci: ufshcd_try_to_abort_task: cmd pending in the device. tag = 7
  <3>[ 2277.476954][T21376] ufshcd-mtk 112b0000.ufshci: Aborting tag 7 / CDB 0x2a succeeded
  <6>[ 2307.551263][T30974] ufshcd-mtk 112b0000.ufshci: ufshcd_abort: Device abort task at tag 7
  <4>[ 2307.623264][  T327] WARNING: CPU: 5 PID: 327 at source/drivers/ufs/core/ufshcd.c:3021 ufshcd_queuecommand+0x66c/0xe34

Fixes: ab248643d3 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231115131024.15829-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24 20:35:24 -05:00