Commit graph

1,264,717 commits

Author SHA1 Message Date
Jerome Brunet
67c55b4615 Merge branch 'v6.8/dt-bindings' into v6.8/drivers
* v6.8/dt-bindings:
  dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids
2023-11-24 18:08:09 +01:00
Neil Armstrong
439d3404ad dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids
Add MIPI ISP & CSI PHY clock ids to G12A clock bindings header

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20231114-topic-amlogic-upstream-isp-clocks-v1-1-223958791501@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-11-24 18:03:00 +01:00
Markus Weippert
bb6cc25386 bcache: revert replacing IS_ERR_OR_NULL with IS_ERR
Commit 028ddcac47 ("bcache: Remove unnecessary NULL point check in
node allocations") replaced IS_ERR_OR_NULL by IS_ERR. This leads to a
NULL pointer dereference.

BUG: kernel NULL pointer dereference, address: 0000000000000080
Call Trace:
 ? __die_body.cold+0x1a/0x1f
 ? page_fault_oops+0xd2/0x2b0
 ? exc_page_fault+0x70/0x170
 ? asm_exc_page_fault+0x22/0x30
 ? btree_node_free+0xf/0x160 [bcache]
 ? up_write+0x32/0x60
 btree_gc_coalesce+0x2aa/0x890 [bcache]
 ? bch_extent_bad+0x70/0x170 [bcache]
 btree_gc_recurse+0x130/0x390 [bcache]
 ? btree_gc_mark_node+0x72/0x230 [bcache]
 bch_btree_gc+0x5da/0x600 [bcache]
 ? cpuusage_read+0x10/0x10
 ? bch_btree_gc+0x600/0x600 [bcache]
 bch_gc_thread+0x135/0x180 [bcache]

The relevant code starts with:

    new_nodes[0] = NULL;

    for (i = 0; i < nodes; i++) {
        if (__bch_keylist_realloc(&keylist, bkey_u64s(&r[i].b->key)))
            goto out_nocoalesce;
    // ...
out_nocoalesce:
    // ...
    for (i = 0; i < nodes; i++)
        if (!IS_ERR(new_nodes[i])) {  // IS_ERR_OR_NULL before
028ddcac47
            btree_node_free(new_nodes[i]);  // new_nodes[0] is NULL
            rw_unlock(true, new_nodes[i]);
        }

This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.

Fixes: 028ddcac47 ("bcache: Remove unnecessary NULL point check in node allocations")
Link: https://lore.kernel.org/all/3DF4A87A-2AC1-4893-AE5F-E921478419A9@suse.de/
Cc: stable@vger.kernel.org
Cc: Zheng Wang <zyytlz.wz@163.com>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Markus Weippert <markus@gekmihesg.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-24 09:39:03 -07:00
Greg Kroah-Hartman
cb9a830e87 USB-serial fixes for 6.7-rc3
Here are a couple of modem device entry fixes and some new modem device
 ids.
 
 All have been in linux-next with no reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZWBhzwAKCRALxc3C7H1l
 COqFAP4uRs5B1dsUxOHQ8HpsbBTmCE9/iFd0k/vegyGqTWd6CAD+LFjP7ySTm+2D
 p5RkbllxNh+rHSeo2DFxnM27bXvmvQE=
 =nvJ4
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-6.7-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 6.7-rc3

Here are a couple of modem device entry fixes and some new modem device
ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-6.7-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (329 commits)
  USB: serial: option: add Luat Air72*U series products
  USB: serial: option: add Fibocom L7xx modules
  USB: serial: option: fix FM101R-GL defines
  USB: serial: option: don't claim interface 4 for ZTE MF290
  Linux 6.7-rc2
  prctl: Disable prctl(PR_SET_MDWE) on parisc
  parisc/power: Fix power soft-off when running on qemu
  parisc: Replace strlcpy() with strscpy()
  NFSD: Fix checksum mismatches in the duplicate reply cache
  NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
  NFSD: Update nfsd_cache_append() to use xdr_stream
  nfsd: fix file memleak on client_opens_release
  dm-crypt: start allocating with MAX_ORDER
  dm-verity: don't use blocking calls from tasklets
  dm-bufio: fix no-sleep mode
  dm-delay: avoid duplicate logic
  dm-delay: fix bugs introduced by kthread mode
  dm-delay: fix a race between delay_presuspend and delay_bio
  drm/amdgpu/gmc9: disable AGP aperture
  drm/amdgpu/gmc10: disable AGP aperture
  ...
2023-11-24 16:30:38 +00:00
Mark Brown
1805a6d269
ASoC: SOF: Extend the enabled DSP core handling
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
2023-11-24 16:12:06 +00:00
Neil Armstrong
5de4e8353e clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks
Add new CTS_ENCL & CTS_ENCL_SEL clocks for the G12A compatible
SoCs, they are used to feed the VPU LCD Pixel encoder used for
DSI display purposes.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-6-95256ed139e6@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-11-24 17:07:40 +01:00
Neil Armstrong
bd5ef3f21d dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids
Add new CLK ids for the CTS_ENCL and CTS_ENCL_SEL clocks
on G12A compatible SoCs.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-1-95256ed139e6@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-11-24 17:07:40 +01:00
Peter Ujfalusi
0ff23d4607
ASoC: SOF: ipc4: Handle ALSA kcontrol change notification from firmware
The control change notification is sent as module notification with a
standardized event_id (higher 16 bit is 0xA15A).
Add generic code to handle the module notification and invoke the control
update callback if the notification is an ALSA kcontrol change message.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24 15:38:01 +00:00
Peter Ujfalusi
f5eb9945cf
ASoC: SOF: ipc4-control: Implement control update for switch/enum controls
Implement the sof_ipc_tplg_control_ops.update function to support a control
change notification from the firmware on switch or enum control types.

Based on the module notification message content, look up the swidget, then
the scontrol which was the source of the notification then if the message
contains the changed values update the cached values.
If only a notification without values received, marked the control as dirty
and on next read access fetch the new values from the firmware.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24 15:38:00 +00:00
Peter Ujfalusi
1a307538c9
ASoC: SOF: ipc4: Add data struct for module notification message from firmware
With the module notification message the information about the notification
is provided via the mailbox with the sof_ipc4_notify_module_data struct.

It contains the module and instance id of the sender of the notification,
the event_id and optionally additional data which is module and event
specific.

At the same time add definitions to identify ALSA kcontrol change
notification.
These notifications use standardized event_id, modules must follow this if
they support such notifications:
upper 16 bit: 0xA15A as a magic identification value
lower 16 bit: param_id of the changed control

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24 15:38:00 +00:00
Peter Ujfalusi
5980bda0a9
ASoC: SOF: ipc4-topology: Helper to find an swidget by module/instance id
The sof_ipc4_find_swidget_by_ids() can be used to find the swidget of a
module instance.
The lookup parameters are the module_id and the instance_id.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24 15:37:59 +00:00
Heiner Kallweit
3a767b482c r8169: remove not needed check in rtl_fw_write_firmware
This check can never be true for a firmware file with a correct format.
Existing checks in rtl_fw_data_ok() are sufficient, no problems with
invalid firmware files are known.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24 15:27:22 +00:00
Zhengchao Shao
e2b706c691 ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet
When I perform the following test operations:
1.ip link add br0 type bridge
2.brctl addif br0 eth0
3.ip addr add 239.0.0.1/32 dev eth0
4.ip addr add 239.0.0.1/32 dev br0
5.ip addr add 224.0.0.1/32 dev br0
6.while ((1))
    do
        ifconfig br0 up
        ifconfig br0 down
    done
7.send IGMPv2 query packets to port eth0 continuously. For example,
./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00
1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00"

The preceding tests may trigger the refcnt uaf issue of the mc list. The
stack is as follows:
	refcount_t: addition on 0; use-after-free.
	WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25)
	CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80
	Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
	RIP: 0010:refcount_warn_saturate (lib/refcount.c:25)
	RSP: 0018:ffffb68f00657910 EFLAGS: 00010286
	RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908
	RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900
	RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff
	R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680
	R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00
	FS:  0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0
	Call Trace:
	<TASK>
	igmp_heard_query (net/ipv4/igmp.c:1068)
	igmp_rcv (net/ipv4/igmp.c:1132)
	ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205)
	ip_local_deliver_finish (net/ipv4/ip_input.c:234)
	__netif_receive_skb_one_core (net/core/dev.c:5529)
	netif_receive_skb_internal (net/core/dev.c:5729)
	netif_receive_skb (net/core/dev.c:5788)
	br_handle_frame_finish (net/bridge/br_input.c:216)
	nf_hook_bridge_pre (net/bridge/br_input.c:294)
	__netif_receive_skb_core (net/core/dev.c:5423)
	__netif_receive_skb_list_core (net/core/dev.c:5606)
	__netif_receive_skb_list (net/core/dev.c:5674)
	netif_receive_skb_list_internal (net/core/dev.c:5764)
	napi_gro_receive (net/core/gro.c:609)
	e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467)
	e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805)
	__napi_poll (net/core/dev.c:6533)
	net_rx_action (net/core/dev.c:6735)
	__do_softirq (kernel/softirq.c:554)
	run_ksoftirqd (kernel/softirq.c:913)
	smpboot_thread_fn (kernel/smpboot.c:164)
	kthread (kernel/kthread.c:388)
	ret_from_fork (arch/x86/kernel/process.c:153)
	ret_from_fork_asm (arch/x86/entry/entry_64.S:250)
	</TASK>

The root causes are as follows:
Thread A					Thread B
...						netif_receive_skb
br_dev_stop					...
    br_multicast_leave_snoopers			...
        __ip_mc_dec_group			...
            __igmp_group_dropped		igmp_rcv
                igmp_stop_timer			    igmp_heard_query         //ref = 1
                ip_ma_put			        igmp_mod_timer
                    refcount_dec_and_test	            igmp_start_timer //ref = 0
			...                                     refcount_inc //ref increases from 0
When the device receives an IGMPv2 Query message, it starts the timer
immediately, regardless of whether the device is running. If the device is
down and has left the multicast group, it will cause the mc list refcount
uaf issue.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24 15:25:56 +00:00
Jakub Kicinski
30c9020015 tools: ynl-gen: use enum name from the spec
The enum name used for id-to-str table does not handle
the enum-name override in the spec correctly.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24 15:23:32 +00:00
Jakub Kicinski
19ed9b3d7a tools: ynl-get: use family c-name
If a new family is ever added with a dash in the name
the C codegen will break. Make sure we use the "safe"
form of the name consistently.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24 15:22:53 +00:00
Zhengchao Shao
486058f42a bonding: remove print in bond_verify_device_path
As suggested by Paolo in link[1], if the memory allocation fails, the mm
layer will emit a lot warning comprising the backtrace, so remove the
print.

[1] https://lore.kernel.org/all/20231118081653.1481260-1-shaozhengchao@huawei.com/

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24 15:21:32 +00:00
Li RongQing
e7bed88e05 net/smc: remove unneeded atomic operations in smc_tx_sndbuf_nonempty
The commit dcd2cf5f2f ("net/smc: add autocorking support") adds an
atomic variable tx_pushing in smc_connection to make sure only one can
send to let it cork more and save CDC slot. since smc_tx_pending can be
called in the soft IRQ without checking sock_owned_by_user() at that
time, which would cause a race condition because bh_lock_sock() did
not honor sock_lock()

After commit 6b88af839d ("net/smc: don't send in the BH context if
sock_owned_by_user"), the transmission is deferred to when sock_lock()
is held by the user. Therefore, we no longer need tx_pending to hold
message.

So remove atomic variable tx_pushing and its operation, and
smc_tx_sndbuf_nonempty becomes a wrapper of __smc_tx_sndbuf_nonempty,
so rename __smc_tx_sndbuf_nonempty back to smc_tx_sndbuf_nonempty

Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Co-developed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>

diff v4: remove atomic variable tx_pushing
diff v3: improvements in the commit body and comments
diff v2: fix a typo in commit body and add net-next subject-prefix

 net/smc/smc.h    |  1 -
 net/smc/smc_tx.c | 30 +-----------------------------
 2 files changed, 1 insertion(+), 30 deletions(-)

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24 15:00:47 +00:00
Edward Adam Davis
237ff253f2 mptcp: fix uninit-value in mptcp_incoming_options
Added initialization use_ack to mptcp_parse_option().

Reported-by: syzbot+b834a6b2decad004cfa1@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24 14:58:33 +00:00
Jakub Kicinski
8e3707975e tools: ynl-gen: always append ULL/LL to range types
32bit builds generate the following warning when we use a u32-max
in range validation:

  warning: decimal constant 4294967295 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here

The range values are u64, slap ULL/LL on all of them just
to avoid such noise.

There's currently no code using full range validation, but
it will matter in the upcoming page-pool introspection.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24 14:57:03 +00:00
David Howells
68516f60c1 afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY
Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when
mounting it.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2023-11-24 14:52:24 +00:00
David Howells
b590eb41be afs: Fix file locking on R/O volumes to operate in local mode
AFS doesn't really do locking on R/O volumes as fileservers don't maintain
state with each other and thus a lock on a R/O volume file on one
fileserver will not be be visible to someone looking at the same file on
another fileserver.

Further, the server may return an error if you try it.

Fix this by doing what other AFS clients do and handle filelocking on R/O
volume files entirely within the client and don't touch the server.

Fixes: 6c6c1d63c2 ("afs: Provide mount-time configurable byte-range file locking emulation")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2023-11-24 14:52:01 +00:00
David Howells
0167236e7d afs: Return ENOENT if no cell DNS record can be found
Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or
cellservdb config file record) can be found rather than returning
EDESTADDRREQ.

Also add cell name lookup info to the cursor dump.

Fixes: d5c32c89b2 ("afs: Fix cell DNS lookup")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2023-11-24 14:51:18 +00:00
Javier Martinez Canillas
6c18005d8f
drm/todo: Add entry about implementing buffer age for damage tracking
Currently, only damage tracking for frame damage is supported. If a driver
needs to do buffer damage (e.g: the framebuffer attached to plane's state
has changed since the last page-flip), the damage helpers just fallback to
a full plane update.

Add en entry in the TODO about implementing buffer age or any other damage
accumulation algorithm for buffer damage handling.

Suggested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-6-javierm@redhat.com
2023-11-24 15:15:30 +01:00
Javier Martinez Canillas
017bdf8fa2
drm/plane: Extend damage tracking kernel-doc
The "Damage Tracking Properties" section in the documentation doesn't have
info about the two type of damage handling: frame damage vs buffer damage.

Add it to the section and mention that helpers only support frame damage,
and how drivers handling buffer damage can indicate that the damage clips
should be ignored.

Also add references to further documentation about the two damage types.

Suggested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-5-javierm@redhat.com
2023-11-24 15:15:29 +01:00
Javier Martinez Canillas
b83b2a80d6
drm/vmwgfx: Disable damage clipping if FB changed since last page-flip
The driver does per-buffer uploads and needs to force a full plane update
if the plane's attached framebuffer has change since the last page-flip.

Suggested-by: Sima Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-4-javierm@redhat.com
2023-11-24 15:15:28 +01:00
Javier Martinez Canillas
0240db231d
drm/virtio: Disable damage clipping if FB changed since last page-flip
The driver does per-buffer uploads and needs to force a full plane update
if the plane's attached framebuffer has change since the last page-flip.

Fixes: 01f05940a9 ("drm/virtio: Enable fb damage clips property for the primary plane")
Cc: <stable@vger.kernel.org> # v6.4+
Reported-by: nerdopolis <bluescreen_avenger@verizon.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218115
Suggested-by: Sima Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-3-javierm@redhat.com
2023-11-24 15:15:27 +01:00
Javier Martinez Canillas
35ed38d582
drm: Allow drivers to indicate the damage helpers to ignore damage clips
It allows drivers to set a struct drm_plane_state .ignore_damage_clips in
their plane's .atomic_check callback, as an indication to damage helpers
such as drm_atomic_helper_damage_iter_init() that the damage clips should
be ignored.

To be used by drivers that do per-buffer (e.g: virtio-gpu) uploads (rather
than per-plane uploads), since these type of drivers need to handle buffer
damages instead of frame damages.

That way, these drivers could force a full plane update if the framebuffer
attached to a plane's state has changed since the last update (page-flip).

Fixes: 01f05940a9 ("drm/virtio: Enable fb damage clips property for the primary plane")
Cc: <stable@vger.kernel.org> # v6.4+
Reported-by: nerdopolis <bluescreen_avenger@verizon.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218115
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-2-javierm@redhat.com
2023-11-24 15:15:25 +01:00
Ranjani Sridharan
31ed8da1c8
ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores
In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24 14:15:06 +00:00
Ranjani Sridharan
0376b995bb
ASoC: SOF: ipc4-topology: Add core_mask in struct snd_sof_pipeline
With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24 14:15:06 +00:00
Ilpo Järvinen
5f57b717cc EDAC/pci_sysfs: Use PCI_HEADER_TYPE_MASK instead of literals
Replace literal 0x7f with PCI_HEADER_TYPE_MASK.

No functional changes:

  $ sha1sum drivers/edac/edac_pci_sysfs.o.*
  805b33a090d8019d8b3b348191f630c72c748c9c drivers/edac/edac_pci_sysfs.o.before
  805b33a090d8019d8b3b348191f630c72c748c9c drivers/edac/edac_pci_sysfs.o.after

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231124090919.23687-5-ilpo.jarvinen@linux.intel.com
2023-11-24 15:08:37 +01:00
Hector Martin
306f5df81f dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
For RX channels, REG_BUS_WIDTH seems to default to a value of 0xf00, and
macOS preserves the upper bits when setting the configuration in the
lower ones. If we reset the upper bits to 0, this causes framing errors
on suspend/resume (the data stream "tears" and channels get swapped
around). Keeping the upper bits untouched, like the macOS driver does,
fixes this issue.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20231029170704.82238-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:57:56 +05:30
Neil Armstrong
375ff42c4c dt-bindings: dma: qcom,gpi: document the SM8650 GPI DMA Engine
Document the GPI DMA Engine on the SM8650 Platform.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-gpi-v2-1-4de85293d730@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:56:40 +05:30
Deborah Brouwer
3b8551e732 media: wave5: add OF and V4L_MEM2MEM_DRIVERS dependencies
Fix compile warning when CONFIG_OF=n:

drivers/media/platform/chips-media/wave5/wave5-vpu.c:274:34: warning: 'wave5_dt_ids' defined but not used [-Wunused-const-variable=]
  274 | static const struct of_device_id wave5_dt_ids[] = {
      |

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added commit log text]
2023-11-24 14:11:22 +01:00
Uwe Kleine-König
ead0e402e5 dmaengine: uniphier-xdmac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:32:30 +05:30
Uwe Kleine-König
5d4304a8d5 dmaengine: uniphier-mdmac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:32:30 +05:30
Uwe Kleine-König
47ee210011 dmaengine: milbeaut-xdmac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:32:30 +05:30
Uwe Kleine-König
0fdd1c4ea9 dmaengine: milbeaut-hdmac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:32:30 +05:30
Amelie Delaunay
54bed6bafa dmaengine: stm32-dma: avoid bitfield overflow assertion
stm32_dma_get_burst() returns a negative error for invalid input, which
gets turned into a large u32 value in stm32_dma_prep_dma_memcpy() that
in turn triggers an assertion because it does not fit into a two-bit field:
drivers/dma/stm32-dma.c: In function 'stm32_dma_prep_dma_memcpy':
include/linux/compiler_types.h:354:38: error: call to '__compiletime_assert_282' declared with attribute error: FIELD_PREP: value too large for the field
     _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
                                         ^
   include/linux/compiler_types.h:335:4: note: in definition of macro '__compiletime_assert'
       prefix ## suffix();    \
       ^~~~~~
   include/linux/compiler_types.h:354:2: note: in expansion of macro '_compiletime_assert'
     _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
     ^~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
    #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                        ^~~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:68:3: note: in expansion of macro 'BUILD_BUG_ON_MSG'
      BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ?  \
      ^~~~~~~~~~~~~~~~
   include/linux/bitfield.h:114:3: note: in expansion of macro '__BF_FIELD_CHECK'
      __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
      ^~~~~~~~~~~~~~~~
   drivers/dma/stm32-dma.c:1237:4: note: in expansion of macro 'FIELD_PREP'
       FIELD_PREP(STM32_DMA_SCR_PBURST_MASK, dma_burst) |
       ^~~~~~~~~~

As an easy workaround, assume the error can happen, so try to handle this
by failing stm32_dma_prep_dma_memcpy() before the assertion. It replicates
what is done in stm32_dma_set_xfer_param() where stm32_dma_get_burst() is
also used.

Fixes: 1c32d6c37c ("dmaengine: stm32-dma: use bitfield helpers")
Fixes: a2b6103b7a ("dmaengine: stm32-dma: Improve memory burst management")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311060135.Q9eMnpCL-lkp@intel.com/
Link: https://lore.kernel.org/r/20231106134832.1470305-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:28:25 +05:30
Peter Ujfalusi
fba293488c
ASoC: Intel: sof_sdw: Always register the HDMI dai links
The topology files for SDW devices require HDMI dai links to be present and
this is granted under normal conditions but in case of special use cases
the display (i915) driver might not be enabled due to deny-listing,
booting with nomodeset or just not compiled at all.

This should not block the non HDMI audio to be usable so register the dai
links unconditionally. The code has been prepared for this and in case of
no HDMI audio the link is created with dummy codec.

Closes: https://github.com/thesofproject/linux/issues/4594
Closes: https://github.com/thesofproject/linux/issues/4648
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124032.15946-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24 12:55:05 +00:00
Peter Ujfalusi
3d1dc8b103
ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available
When the HDMI is not present due to disabled display support
we will use dummy codec and the HDMI routes will refer to non existent
DAPM widgets.

Trim the route list from the HDMI routes to be able to probe the card even
if the HDMI dais are not registered.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124015.15878-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24 12:55:04 +00:00
James Morse
5bfa0e45e9 x86/cpu/intel_epb: Don't rely on link order
intel_epb_init() is called as a subsys_initcall() to register cpuhp
callbacks. The callbacks make use of get_cpu_device() which will return
NULL unless register_cpu() has been called. register_cpu() is called
from topology_init(), which is also a subsys_initcall().

This is fragile. Moving the register_cpu() to a different
subsys_initcall() leads to a NULL dereference during boot.

Make intel_epb_init() a late_initcall(), user-space can't provide a
policy before this point anyway.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-11-24 13:54:31 +01:00
Xiaolei Wang
3448397a47 dmaengine: fsl-edma: Add judgment on enabling round robin arbitration
Add judgment on enabling round robin arbitration to avoid
exceptions if this function is not supported.

Call trace:
 fsl_edma_resume_early+0x1d4/0x208
 dpm_run_callback+0xd4/0x304
 device_resume_early+0xb0/0x208
 dpm_resume_early+0x224/0x528
 suspend_devices_and_enter+0x3e4/0xd00
 pm_suspend+0x3c4/0x910
 state_store+0x90/0x124
 kobj_attr_store+0x48/0x64
 sysfs_kf_write+0x84/0xb4
 kernfs_fop_write_iter+0x19c/0x264
 vfs_write+0x664/0x858
 ksys_write+0xc8/0x180
 __arm64_sys_write+0x44/0x58
 invoke_syscall+0x5c/0x178
 el0_svc_common.constprop.0+0x11c/0x14c
 do_el0_svc+0x30/0x40
 el0_svc+0x58/0xa8
 el0t_64_sync_handler+0xc0/0xc4
 el0t_64_sync+0x190/0x194

Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-3-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:21:25 +05:30
Xiaolei Wang
2838a89765 dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping
Some channels may be masked. When the system is suspended,
if these masked channels are not filtered out, this will
lead to null pointer operations and system crash:

Unable to handle kernel NULL pointer dereference at virtual address
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000894300000
[00000000000002a0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 989 Comm: sh Tainted: G B 6.6.0-16203-g557fb7a3ec4c-dirty #70
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc: fsl_edma_disable_request+0x3c/0x78
  lr: fsl_edma_disable_request+0x3c/0x78
  sp:ffff800089ae7690
  x29: ffff800089ae7690 x28: ffff000807ab5440 x27: ffff000807ab5830
  x26: 0000000000000008 x25: 0000000000000278 x24: 0000000000000001
  23: ffff000807ab4328 x22: 0000000000000000 x21: 0000000000000009
  x20: ffff800082616940 x19: 0000000000000000 x18: 0000000000000000
  x17: 3d3d3d3d3d3d3d3d x16: 3d3d3d3d3d3d3d3d x15: 3d3d3d3d3d3d3d3d
  x14: 3d3d3d3d3d3d3d3d x13: 3d3d3d3d3d3d3d3d x12: 1ffff00010d45724
  x11: ffff700010d45724 x10: dfff800000000000 x9: dfff800000000000
  x8: 00008fffef2ba8dc x7: 0000000000000001 x6: ffff800086a2b927
  x5: ffff800086a2b920 x4: ffff700010d45725 x3: ffff8000800d5bbc
  x2 : 0000000000000000 x1 : ffff000800c1d880 x0 : 0000000000000001
  Call trace:
   fsl_edma_disable_request+0x3c/0x78
   fsl_edma_suspend_late+0x128/0x12c
  dpm_run_callback+0xd4/0x304
   __device_suspend_late+0xd0/0x240
  dpm_suspend_late+0x174/0x59c
  suspend_devices_and_enter+0x194/0xd00
  pm_suspend+0x3c4/0x910

Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-2-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:21:25 +05:30
Lad Prabhakar
56d02cfa3f dt-bindings: dma: rz-dmac: Document RZ/Five SoC
The DMAC block on the RZ/Five SoC is identical to one found on the RZ/G2UL
SoC. "renesas,r9a07g043-dmac" compatible string will be used on the
RZ/Five SoC so to make this clear, update the comment to include RZ/Five
SoC.

No driver changes are required as generic compatible string
"renesas,rz-dmac" will be used as a fallback on RZ/Five SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231102203922.548353-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-24 18:19:12 +05:30
Andy Shevchenko
6191e49de3 pinctrl: baytrail: Simplify code with cleanup helpers
Use macros defined in linux/cleanup.h to automate resource lifetime
control in the driver.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-11-24 14:33:30 +02:00
Andy Shevchenko
078d83033a pinctrl: baytrail: Move default strength assignment to a switch-case
When ->pin_config_set() is called from the GPIO library (assumed
GpioIo() ACPI resource), the argument can be 1, when, for example,
PullDefault is provided. In such case we supply sane default in
the driver. Move that default assingment to a switch-case, so
it will be consolidated in one place.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-11-24 14:33:30 +02:00
Andy Shevchenko
5398a0e23c pinctrl: baytrail: Factor out byt_gpio_force_input_mode()
There is a piece of code that it being used at least twice.
Factor it out.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-11-24 14:33:30 +02:00
Andy Shevchenko
1a856a22e6 pinctrl: baytrail: Fix types of config value in byt_pin_config_set()
When unpacked, the config value is split to two of different types.
Fix the types accordingly.

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-24 14:33:30 +02:00
Andy Shevchenko
9580ba25c5 pinctrl: lynxpoint: Simplify code with cleanup helpers
Use macros defined in linux/cleanup.h to automate resource lifetime
control in the driver.

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-24 14:33:25 +02:00
Raag Jadav
228fe71379 pinctrl: tangier: simplify locking using cleanup helpers
Use lock guards from cleanup.h to simplify locking.

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-24 14:33:14 +02:00