Block copy DMA(BCDMA)module on K3 SoCs have ring, BCHAN, TX and RX
channel cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
five regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-3-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for introducing more register regions, add description
for existing register regions so that its easier to map reg-names to
that of SoC Documentations/TRMs.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-2-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The coda host file is a backing file for the coda inode on a different
filesystem than the coda inode.
Change the locking order to take the coda inode lock before taking
the backing host file freeze protection, same as in ovl_write_iter()
and in network filesystems that use cachefiles.
Link: https://lore.kernel.org/r/CAOQ4uxjcnwuF1gMxe64WLODGA_MyAy8x-DtqkCUxqVQKk3Xbng@mail.gmail.com/
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-10-amir73il@gmail.com
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In vfs code, file_start_write() is usually called after the permission
hook in rw_verify_area(). btrfs_ioctl_encoded_write() in an exception
to this rule.
Move file_start_write() to after the rw_verify_area() check in encoded
write to make the permission hook "start-write-safe".
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-9-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In vfs code, file_start_write() is usually called after the permission
hook in rw_verify_area(). vfs_dedupe_file_range_one() is an exception
to this rule.
In vfs_dedupe_file_range_one(), move file_start_write() to after the
the rw_verify_area() checks to make them "start-write-safe".
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-8-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In many of the vfs helpers, file permission hook is called before
taking sb_start_write(), making them "start-write-safe".
do_clone_file_range() is an exception to this rule.
do_clone_file_range() has two callers - vfs_clone_file_range() and
overlayfs. Move remap_verify_area() checks from do_clone_file_range()
out to vfs_clone_file_range() to make them "start-write-safe".
Overlayfs already has calls to rw_verify_area() with the same security
permission hooks as remap_verify_area() has.
The rest of the checks in remap_verify_area() are irrelevant for
overlayfs that calls do_clone_file_range() offset 0 and positive length.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-7-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
All the callers of ->splice_write(), (e.g. do_splice_direct() and
do_splice()) already check rw_verify_area() for the entire range
and perform all the other checks that are in vfs_write_iter().
Instead of creating another tiny helper for special caller, just
open-code it.
This is needed for fanotify "pre content" events.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-6-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
vfs_splice_read() has a permission hook inside rw_verify_area() and
it is called from splice_file_to_pipe(), which is called from
do_splice() and do_sendfile().
do_sendfile() already has a rw_verify_area() check for the entire range.
do_splice() has a rw_verify_check() for the splice to file case, not for
the splice from file case.
Add the rw_verify_area() check for splice from file case in do_splice()
and use a variant of vfs_splice_read() without rw_verify_area() check
in splice_file_to_pipe() to avoid the redundant rw_verify_area() checks.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-5-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
vfs_splice_read() has a permission hook inside rw_verify_area() and
it is called from do_splice_direct() -> splice_direct_to_actor().
The callers of do_splice_direct() (e.g. vfs_copy_file_range()) already
call rw_verify_area() for the entire range, but the other caller of
splice_direct_to_actor() (nfsd) does not.
Add the rw_verify_area() checks in nfsd_splice_read() and use a
variant of vfs_splice_read() without rw_verify_area() check in
splice_direct_to_actor() to avoid the redundant rw_verify_area() checks.
This is needed for fanotify "pre content" events.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-4-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
All callers of do_splice_direct() have a call to rw_verify_area() for
the entire range that is being copied, e.g. by vfs_copy_file_range() or
do_sendfile() before calling do_splice_direct().
The rw_verify_area() check inside do_splice_direct() is redundant and
is called after sb_start_write(), so it is not "start-write-safe".
Remove this redundant check.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-3-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The main callers of do_splice_direct() also call rw_verify_area() for
the entire range that is being copied, e.g. by vfs_copy_file_range()
or do_sendfile() before calling do_splice_direct().
The only caller that does not have those checks for entire range is
ovl_copy_up_file(). In preparation for removing the checks inside
do_splice_direct(), add rw_verify_area() call in ovl_copy_up_file().
For extra safety, perform minimal sanity checks from rw_verify_area()
for non negative offsets also in the copy up do_splice_direct() loop
without calling the file permission hooks.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-2-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The callers of vfs_iter_write() are required to hold file_start_write().
file_start_write() is a no-op for the S_ISBLK() case, but it is really
needed when the backing file is a regular file.
We are going to move file_{start,end}_write() into vfs_iter_write(), but
we need to fix this first, so that the fix could be backported to stable
kernels.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/ZV8ETIpM+wZa33B5@infradead.org/
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231123092000.2665902-1-amir73il@gmail.com
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When allocating from devices with different durability, we might end up
with more replicas than required; this changes
bch2_alloc_sectors_start() to check for this, and drop replicas that
aren't needed to hit the number of replicas requested.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree iterator code overlays keys from the journal until journal
replay is finished; since we're now starting copygc/rebalance etc.
before replay is finished, this is multithreaded access and thus needs
refcounting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
ExynosAutov9 pin controller capable of wake-ups is still compatible with
Exynos7, however it does not mux interrupts. Add Exynos7 compatible
fallback to annotate that compatibility and match the bindings.
Link: https://lore.kernel.org/r/20231122200407.423264-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Various userspace scripts/tools may expect mount entries in
/proc/mounts to reflect the device path names used to mount the
associated filesystem. bcachefs seems to normalize the device path
to the underlying device name based on the block device. This
confuses tools like fstests when the test devices might be lvm or
device-mapper based.
The default behavior for show_vfsmnt() appers to be to use the
string passed to alloc_vfsmnt(), so tweak bcachefs to copy the path
at device superblock read time and to display it via
->show_devname().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Exynos850 pin controller capable of wake-ups is still compatible with
Exynos7, however it does not mux interrupts. Add Exynos7 compatible
fallback to annotate that compatibility and match the bindings.
Link: https://lore.kernel.org/r/20231122200407.423264-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Older ARM8 SoCs like Exynos5433, Exynos7 and Exynos7885 have the pin
controller with wake-up interrupts muxed, thus the wake-up interrupt
controller device node has interrupts property, while its pin banks
might not (because they are muxed by the wake-up controller).
Newer SoCs like Exynos850 and ExynosAutov9 do not used muxed wake-up
interrupts:
1. Wake-up interrupt controller device node has no interrupts,
2. Its pin banks have interrupts (since there is no muxing).
Their programming interface is however still compatible with Exynos7,
thus change the bindings to express this: retain compatibility with
Exynos7 and add new compatibility fallback of Exynos850 in newer
designs.
No driver changes are needed. This is necessary only to properly
describe DTS.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20231122200407.423264-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This fixes a bug where copygc would occasionally race with going
read-write and die, thinking we were read only, because it couldn't take
a ref on c->writes.
It's not necessary for copygc (or rebalance, or copygc) to take write
refs; they could run with BCH_TRANS_COMMIT_nocheck_rw, but this is an
easier fix that making sure that flag is passed correctly everywhere.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
copygc no longer has to scan the buckets, so it's no longer a problem if
the number of buckets is changing while it's running.
This also fixes a bug where we forgot to restart copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds move_ctxt_wait_event_timeout(), which can sleep for a timeout
while also issueing pending moves as reads complete.
Co-developed-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Introduce a new helper to flush all move IOs, and use it in a few places
where we should have been.
The new helper also drops btree locks before waiting on outstanding move
writes, avoiding potential deadlocks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Qualcomm Soundwire Controllers IP version after 1.3 have a dedicated
master id register which will provide a unique id value for each
controller instance. Use this value instead of artificially generated
value from idr. Versions 1.3 and below only have one instance of
soundwire controller which does no have this register, so let them use
value from idr.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231123105332.102167-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If same devices with same device IDs are present on different soundwire
buses, the probe fails due to conflicting device names and sysfs
entries:
sysfs: cannot create duplicate filename '/bus/soundwire/devices/sdw:0:0217:0204:00:0'
The link ID is 0 for both devices, so they should be differentiated by
the controller ID. Add the controller ID so, the device names and sysfs entries look
like:
sdw:1:0:0217:0204:00:0 -> ../../../devices/platform/soc@0/6ab0000.soundwire-controller/sdw-master-1-0/sdw:1:0:0217:0204:00:0
sdw:3:0:0217:0204:00:0 -> ../../../devices/platform/soc@0/6b10000.soundwire-controller/sdw-master-3-0/sdw:3:0:0217:0204:00:0
[PLB changes: use bus->controller_id instead of bus->id]
Fixes: 7c3cd189b8 ("soundwire: Add Master registration")
Cc: stable@vger.kernel.org
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing SoundWire support misses a clear Controller/Manager
hiearchical definition to deal with all variants across SOC vendors.
a) Intel platforms have one controller with 4 or more Managers.
b) AMD platforms have two controllers with one Manager each, but due
to BIOS issues use two different link_id values within the scope of a
single controller.
c) QCOM platforms have one or more controller with one Manager each.
This patch adds a 'controller_id' which can be set by higher
levels. If assigned to -1, the controller_id will be set to the
system-unique IDA-assigned bus->id.
The main change is that the bus->id is no longer used for any device
name, which makes the definition completely predictable and not
dependent on any enumeration order. The bus->id is only used to insert
the Managers in the stream rt context.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/stable/20231017160933.12624-2-pierre-louis.bossart%40linux.intel.com
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We still have disk space accounting changes coming for erasure coding,
and the changes won't be as strictly backwards compatible as they'd
ought to be - specifically, we need to start accounting striped data
under a separate counter in bch_alloc (which describes buckets).
A fsck will suffice for upgrading/downgrading, but since erasure coding
is the most incomplete major feature of bcachefs it still makes sense to
put behind a separate kconfig option, so that users are fully aware.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Control flow integrity is now checking that type signatures match on
indirect function calls. That breaks closures, which embed a work_struct
in a closure in such a way that a closure_fn may also be used as a
workqueue fn by the underlying closure code.
So we have to change closure fns to take a work_struct as their
argument - but that results in a loss of clarity, as closure fns have
different semantics from normal workqueue functions (they run owning a
ref on the closure, which must be released with continue_at() or
closure_return()).
Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros
as suggested by Kees, to smooth things over a bit.
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
ksmbd set ->op_state as OPLOCK_STATE_NONE on lease break ack error.
op_state of lease should not be updated because client can send lease
break ack again. This patch fix smb2.lease.breaking2 test failure.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Directly set SMB2_FLAGS_ASYNC_COMMAND flags and AsyncId in smb2 header of
interim response instead of current response header.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add missing release async id and delete interim response entry after
sending status pending response. This only cause when smb2 lease is enable.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd should process secound parallel smb2 create request during waiting
oplock break ack. parent lock range that is too large in smb2_open() causes
smb2_open() to be serialized. Move the oplock handling to the bottom of
smb2_open() and make it called after parent unlock. This fixes the failure
of smb2.lease.breaking1 testcase.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
xfstests generic/002 test fail when enabling smb2 leases feature.
This test create hard link file, but removeal failed.
ci has a file open count to count file open through the smb client,
but in the case of hard link files, The allocation of ci per inode
cause incorrectly open count for file deletion. This patch allocate
ci per dentry to counts open counts for hard link.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When allocated memory for 'new' failed,just return
will cause memory leak of 'ar'.
Fixes: 1819a90429 ("ksmbd: reorganize ksmbd_iov_pin_rsp()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311031837.H3yo7JVl-lkp@intel.com/
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Before returning the rswitch_start_xmit() in the error path,
dev_kfree_skb_any() should be called. So, fix it.
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This .ndo_start_xmit() function should return netdev_tx_t value,
not -ENOMEM. So, fix it.
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The type of ret in rswitch_start_xmit() should be netdev_tx_t. So,
fix it.
Fixes: 3590918b5d ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add a missing error check in the adapter initialization of the
pata_isapnp driver (Chen).
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZV/kXwAKCRDdoc3SxdoY
dozeAQC32WCYcV5i9spZ/uKFAIRrfmX+PdrsUkujQbGWabumGQD41nzi/Qswgy5g
qpmd1zaFmH9W8Le32ziFHHlSY7n/CA==
=PaHw
-----END PGP SIGNATURE-----
Merge tag 'ata-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Add a missing error check in the adapter initialization of the
pata_isapnp driver (Chen)
* tag 'ata-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_isapnp: Add missing error check for devm_ioport_map()
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmVfrJIQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpqKID/oCNxih4ErRdCYJOZA+tR0YkuWJBKmF9KSe
w94GnsxpCdPFMo+Lr2J3WoHsxH/xTFiT5BcLMTKb5Rju7zSIvf40xZxmizwhnU3p
aA1WhWjo2Qu20p35wbKy23frSOZIZAj3+PXUxOG9hso6fY96JVpDToBQ4I9k5OG1
1KHXorlktQgDWk1XryI0z9F73Q3Ja3Bt2G4aXRAGwnTyvvIHJd+jm8ksjaEKKkmQ
YXv1+ZJXhHkaeSfcwYcOFDffx+O1dooWnHjcKbgyXu0UQq0kxxIwBkF5C9ltZVVT
TW2WusplldV4EU/Z3ck7E03Kbmk81iTN9yyh7wAr0TmkEEOdx5Mv/PtqUHme0A4Z
PJEBR7g6AVnERttGk4H2MOiPBsMOKBFT2UIVSqUTMsij2a5uaKjGvBXXDELdf4g9
45QKuP1QflEImtKm6HtELA9gWuAF1rGOrH7PMLLPhmQck643cgVIcw6Tz3eyaJMe
cBuvTsejkbQVeLSiX1mdvZk0gxuowCP/A8+CXyODdhl+H/mrDnMgR6HCV07VOy6F
lVXeXjQaqwd9fdQ2kxfjbstNkjE3Z/NRDGJ+y4oNFNj6YmLoVHivBAXDHhHIVpXb
u/F+IUm7I2M8G3DfqS0VOABauqzbDxe7c8j10OzJeDskd06t1prt6IY/qV4uhImM
G6XNMzeHjw==
=EShg
-----END PGP SIGNATURE-----
Merge tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A bit bigger than usual at this time, but nothing really earth
shattering:
- NVMe pull request via Keith:
- TCP TLS fixes (Hannes)
- Authentifaction fixes (Mark, Hannes)
- Properly terminate target names (Christoph)
- MD pull request via Song, fixing a raid5 corruption issue
- Disentanglement of the dependency mess in nvme introduced with the
tls additions. Now it should actually build on all configs (Arnd)
- Series of bcache fixes (Coly)
- Removal of a dead helper (Damien)
- s390 dasd fix (Muhammad, Jan)
- lockdep blk-cgroup fixes (Ming)"
* tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits)
nvme: tcp: fix compile-time checks for TLS mode
nvme: target: fix Kconfig select statements
nvme: target: fix nvme_keyring_id() references
nvme: move nvme_stop_keep_alive() back to original position
nbd: pass nbd_sock to nbd_read_reply() instead of index
s390/dasd: protect device queue against concurrent access
s390/dasd: resolve spelling mistake
block/null_blk: Fix double blk_mq_start_request() warning
nvmet-tcp: always initialize tls_handshake_tmo_work
nvmet: nul-terminate the NQNs passed in the connect command
nvme: blank out authentication fabrics options if not configured
nvme: catch errors from nvme_configure_metadata()
nvme-tcp: only evaluate 'tls' option if TLS is selected
nvme-auth: set explanation code for failure2 msgs
nvme-auth: unlock mutex in one place only
block: Remove blk_set_runtime_active()
nbd: fix null-ptr-dereference while accessing 'nbd->config'
nbd: factor out a helper to get nbd_config without holding 'config_lock'
nbd: fold nbd config initialization into nbd_alloc_config()
bcache: avoid NULL checking to c->root in run_cache_set()
...
-----BEGIN PGP SIGNATURE-----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=ifVm
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"A fix for ensuring that LINKAT always propagates flags correctly, and
a fix for an off-by-one in segment skipping for registered buffers.
Both heading to stable as well"
* tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux:
io_uring: fix off-by one bvec index
io_uring/fs: consider link->flags when getting path for LINKAT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=CmgY
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- revert of commit that caused regression to many Logitech unifying
receiver users (Jiri Kosina)
- power management fix for hid-mcp2221 (Hamish Martin)
- fix for race condition between HID core and HID debug (Charles Yi)
- a couple of assorted device-ID-specific quirks
* tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad
HID: hid-asus: reset the backlight brightness level on resume
HID: hid-asus: add const to read-only outgoing usb buffer
Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration"
HID: add ALWAYS_POLL quirk for Apple kb
HID: glorious: fix Glorious Model I HID report
HID: fix HID device resource race between HID core and debugging support
HID: apple: add Jamesdonkey and A3R to non-apple keyboards list
HID: mcp2221: Allow IO to start during probe
HID: mcp2221: Set driver data before I2C adapter add
Introduced by commit 6e2d85ec05 ("net: phy: Stop with excessive soft
reset").
soft_reset call for phy_init_hw had multiple revision across the years
and the implementation goes back to 2014. Originally was a simple call
to write the generic PHY reset BIT, it was then moved to a dedicated
function. It was then added the option for PHY driver to define their
own special way to reset the PHY. Till this change, checking for ret was
correct as it was always filled by either the generic reset or the
custom implementation. This changed tho with commit 6e2d85ec05 ("net:
phy: Stop with excessive soft reset"), as the generic reset call to PHY
was dropped but the ret check was never made entirely optional and
dependent whether soft_reset was defined for the PHY driver or not.
Luckly nothing was ever added before the soft_reset call so the ret
check (in the case where a PHY didn't had soft_reset defined) although
wrong, never caused problems as ret was init 0 at the start of
phy_init_hw.
To prevent any kind of problem and to make the function cleaner and more
robust, correctly move the ret check if the soft_reset section making it
optional and needed only with the function defined.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a simple script that parses the Netlink YAML spec files
(Documentation/netlink/specs/), and generates RST files to be rendered
in the Network -> Netlink Specification documentation page.
Create a python script that is invoked during 'make htmldocs', reads the
YAML specs input file and generate the correspondent RST file.
Create a new Documentation/networking/netlink_spec index page, and
reference each Netlink RST file that was processed above in this main
index.rst file.
In case of any exception during the parsing, dump the error and skip
the file.
Do not regenerate the RST files if the input files (YAML) were not
changed in-between invocations.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
----
Changelog:
V3:
* Do not regenerate the RST files if the input files were not
changed. In order to do it, a few things changed:
- Rely on Makefile more to find what changed, and trigger
individual file processing
- The script parses file by file now (instead of batches)
- Create a new option to generate the index file
V2:
* Moved the logic from a sphinx extension to a external script
* Adjust some formatting as suggested by Donald Hunter and Jakub
* Auto generating all the rsts instead of having stubs
* Handling error gracefully
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes for v6.7-rc3:
- Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
- Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init()
- Fix the safe_lut_tbl[] for sc8280xp to match downstream
- Don't attach the drm_dp_set_subconnector_property() for eDP
- Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
there is a bootup crash on multiple targets
- Remove unnecessary NULL check left behind during cleanup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com