If message fills up we need to stop writing. 'break' will
only get us out of the iteration over pools of a single
netdev, we need to also stop walking netdevs.
This results in either infinite dump, or missing pools,
depending on whether message full happens on the last
netdev (infinite dump) or non-last (missing pools).
Fixes: 950ab53b77 ("net: page_pool: implement GET in the netlink API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switching from a separate list to flags introduced a bug here.
We were accidentially ORing the flag before initailizing the placement
and not after. So this code didn't do nothing except producing a
warning.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Link: https://patchwork.freedesktop.org/patch/msgid/20240226142759.93130-1-christian.koenig@amd.com
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # compile only
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
struct net_device poll_dev in struct igc_q_vector was added
in one of the initial commits, but never used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GMC IR-USB adapter cable utilizes a FTDI FT232R chip.
Add VID/PID for this adapter so it can be used as serial device via
ftdi_sio.
Signed-off-by: Daniel Vogelbacher <daniel@chaospixel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Ziwei Xiao says:
====================
gve: Add header split support
Currently, the ethtool's ringparam has added a new field
tcp-data-split for enabling and disabling header split. These three
patches will utilize that ethtool flag to support header split in GVE
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To record the stats of header split packets, three stats are added in
the driver's ethtool stats.
- rx_hsplit_pkt is the split packets count with header split
- rx_hsplit_bytes is the received header bytes count with header split
- rx_hsplit_unsplit_pkt is the unsplit packet count due to header buffer
overflow or zero header length when header split is enabled
Currently, it's entering the stats_update critical section more than
once per packet. We have plans to avoid that in the future change to let
all the stats_update happen in one place at the end of
`gve_rx_poll_dqo`.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add header buffers and ethtool support to enable header split via the
tcp-data-split flag in ethtool's ringparam config. A coherent dma memory
is allocated for the header buffers. There is one header buffer per ring
entry by calculating the offset to the header-buffers starting address.
The header buffer is always copied directly into the skb and payload is
always added as frags. When there is a header buffer overflow or the
header length is 0, the driver places the whole unsplit packet in frags.
When toggling header split, the driver will call gve_adjust_config to
set its queues appropriately. If header split is enabled by the user and
the max packet buffer size is no less than 4KB, driver will set the
packet buffer size as 4KB to support TCP_ZEROCOPY_RECEIVE. Otherwise the
driver will use the default 2KB as the packet buffer size.
`ethtool -G <dev> tcp-data-split on/off` is the command to toggle header
split.
`ethtool -g <dev>` will show the status of header split with the field
of `tcp-data-split`.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To enable header split via ethtool, we first need to query the device to
get the max rx buffer size and header buffer size. Add a device option
to get these values and store them in the driver. If the header buffer
size received from the device is non-zero, it means header split is
supported in the device.
Currently the max rx buffer size will only be used when header split is
enabled which will set the data_buffer_size_dqo to be the max rx buffer
size. Also change the data_buffer_size_dqo from int to u16 since we are
modifying it and making it to be consistent with max_rx_buffer_size.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ip6_tunnel driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PM4125 PMIC has the same Type-C register block as the PMI632.
Likewise it doesn't support USB Power Delivery. Define the compatible
for the TypeC block found on PM4125, using PMI632 as a compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240304-pm4125-typec-v4-1-f3601a16f9ea@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the components of YUV420 over DP are added. Therefore, let's mark the
connector property as true for DP connector when the DP type is not eDP
and when there is a CDM block available.
Changes in v3:
- Move setting the connector's ycbcr_420_allowed parameter so
that it is not dependent on if the dp_display is not eDP
Changes in v2:
- Check for if dp_catalog has a CDM block available instead of
checking if VSC SDP is allowed when setting the dp connector's
ycbcr_420_allowed parameter
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579628/
Link: https://lore.kernel.org/r/20240222194025.25329-20-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reserve CDM blocks for DP if the mode format is YUV420. Currently this
reservation only works for writeback and DP if the format is YUV420. But
this can be easily extented to other YUV formats for DP.
Changes in v2:
- Minor code simplification
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579630/
Link: https://lore.kernel.org/r/20240222194025.25329-19-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Adjust the encoder timing engine setup programming in the case of video
mode for YUV420 over DP to accommodate CDM.
Changes in v3:
- Move drm_display_mode's hskew division to another patch
- Minor cleanup
Changes in v2:
- Move timing engine programming to this patch
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579634/
Link: https://lore.kernel.org/r/20240222194025.25329-18-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Adjust the encoder format programming in the case of video mode for DP
to accommodate CDM related changes.
Changes in v4:
- Remove hw_cdm check in dpu_encoder_needs_periph_flush()
- Remove hw_cdm check when getting the fmt_fourcc in
dpu_encoder_phys_vid_enable()
Changes in v2:
- Move timing engine programming to a separate patch from this
one
- Move update_pending_flush_periph() invocation completely to
this patch
- Change the logic of dpu_encoder_get_drm_fmt() so that it only
calls drm_mode_is_420_only() instead of doing additional
unnecessary checks
- Create new functions msm_dp_needs_periph_flush() and it's
supporting function dpu_encoder_needs_periph_flush() to check
if the mode is YUV420 and VSC SDP is enabled before doing a
peripheral flush
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579641/
Link: https://lore.kernel.org/r/20240222194025.25329-17-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DP controller can be setup to operate in either SDP update flush mode or
peripheral flush mode based on the DP controller hardware version.
Starting in DP v1.2, the hardware documents require the use of
peripheral flush mode for SDP packets such as PPS OR VSC SDP packets.
In-line with this guidance, lets program the DP controller to use
peripheral flush mode starting DP v1.2
Changes in v4:
- Clear up that DP_MAINLINK_CTRL_FLUSH_MODE register requires
the use of bits [24:23]
- Modify macros DP_MAINLINK_FLUSH_MODE_UPDATE_SDP and
DP_MAINLINK_FLUSH_MODE_SDP_PERIPH_UPDATE to explicitly set
their values in the bits of DP_MAINLINK_CTRL_FLUSH_MODE_MASK
Changes in v3:
- Clear up that the DP_MAINLINK_FLUSH_MODE_SDE_PERIPH_UPDATE
macro is setting bits [24:23] to a value of 3
Changes in v2:
- Use the original dp_catalog_hw_revision() function to
correctly check the DP HW version
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579621/
Link: https://lore.kernel.org/r/20240222194025.25329-16-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support to pack and send the VSC SDP packet for DP. This therefore
allows the transmision of format information to the sinks which is
needed for YUV420 support over DP.
Changes in v5:
- Slightly modify use of drm_dp_vsc_sdp_pack()
- Remove dp_catalog NULL checks
- Modify dp_utils_pack_sdp_header() to more clearly pack the
header buffer
- Move dp_utils_pack_sdp_header() inside of
dp_catalog_panel_send_vsc_sdp to clearly show the relationship
between the header buffer and the vsc_sdp struct
- Due to the last point, remove the dp_utils_pack_vsc_sdp()
function and only call drm_dp_vsc_sdp_pack() in
dp_panel_setup_vsc_sdp_yuv_420()
Changes in v4:
- Remove struct msm_dp_sdp_with_parity
- Use dp_utils_pack_sdp_header() to pack the SDP header and
parity bytes into a buffer
- Use this buffer when writing the VSC SDP data in
dp_catalog_panel_send_vsc_sdp()
- Write to all of the MMSS_DP_GENERIC0 registers instead of just
the ones with non-zero values
Changes in v3:
- Create a new struct, msm_dp_sdp_with_parity, which holds the
packing information for VSC SDP
- Use drm_dp_vsc_sdp_pack() to pack the data into the new
msm_dp_sdp_with_parity struct instead of specifically packing
for YUV420 format
- Modify dp_catalog_panel_send_vsc_sdp() to send the VSC SDP
data using the new msm_dp_sdp_with_parity struct
Changes in v2:
- Rename GENERIC0_SDPSIZE macro to GENERIC0_SDPSIZE_VALID
- Remove dp_sdp from the dp_catalog struct since this data is
being allocated at the point used
- Create a new function in dp_utils to pack the VSC SDP data
into a buffer
- Create a new function that packs the SDP header bytes into a
buffer. This function is made generic so that it can be
utilized by dp_audio
header bytes into a buffer
- Create a new function in dp_utils that takes the packed buffer
and writes to the DP_GENERIC0_* registers
- Split the dp_catalog_panel_config_vsc_sdp() function into two
to disable/enable sending VSC SDP packets
- Check the DP HW version using the original useage of
dp_catalog_hw_revision() and correct the version checking
logic
- Rename dp_panel_setup_vsc_sdp() to
dp_panel_setup_vsc_sdp_yuv_420() to explicitly state that
currently VSC SDP is only being set up to support YUV420 modes
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579636/
Link: https://lore.kernel.org/r/20240222194025.25329-14-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Shannon Nelson says:
====================
ionic: code cleanup and performance tuning
Brett has been performance testing and code tweaking and has
come up with several improvements for our fast path operations.
In a simple single thread / single queue iperf case on a 1500 MTU
connection we see an improvement from 74.2 to 86.7 Gbits/sec.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The MODULE_AUTHOR macro is supposed to be a person
not a company.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up complaints from an xmastree.py scan.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel's CQE dim table to align better with the
driver's use of completion queues, and use the tx moderation
when using Tx interrupts.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An earlier change moved the hwstamp queue check into a helper
function with an unlikely(). However, it makes more sense for
the caller to decide if it's likely() or unlikely(), so make
the change to support that.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To help make sure we're only accessing things we really need
to access we can cut down on the q->lif->netdev references by
using q->dev which is already in cache.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using q->lif->netdev, just pass the netdev when it's
locally defined.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there is a lot of transmit traffic the driver can get into a
situation that the device is starved due to the doorbell never
being rung. This can happen if xmit_more is set constantly
and __netdev_tx_sent_queue() keeps returning false. Fix this
by checking if the queue needs to be stopped right before
calling __netdev_tx_sent_queue(). Use MAX_SKB_FRAGS + 1 as the
stop condition because that's the maximum number of frags
supported for non-TSO transmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver currently calls netdev_tx_completed_queue() for every
Tx completion. However, this API is only meant to be called once
per NAPI if any Tx work is done. Make the necessary changes to
support calling netdev_tx_completed_queue() only once per NAPI.
Also, use the __netdev_tx_sent_queue() API, which supports the
xmit_more functionality.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of napi_consume_skb so that skb recycling
can happen by way of the napi_skb_cache.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Perf was showing some hot spots in ionic_tx_descs_needed()
for TSO traffic. Rework the function to return sooner where
possible.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cut down the number of default Tx and Rx descriptors to save
initial memory requirements.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the driver attempts to wake the Tx queue
for every descriptor processed. However, this is
overkill and can cause thrashing since Tx xmit can be
running concurrently on a different CPU than Tx clean.
Fix this by refactoring Tx cq servicing into its own
function so the Tx wake code can run after processing
all Tx descriptors.
The driver isn't using the expected memory barriers
to make sure the stop/start bits are coherent. Fix
this by making sure to use the correct memory barriers.
Also, the driver is using the wake API during Tx
xmit even though it's already scheduled. Fix this by
using the start API during Tx xmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'm updating __assign_str() and will be removing the second parameter. To
make sure that it does not break anything, I make sure that it matches the
__string() field, as that is where the string is actually going to be
saved in. To make sure there's nothing that breaks, I added a WARN_ON() to
make sure that what was used in __string() is the same that is used in
__assign_str().
In doing this change, an error was triggered as __assign_str() now expects
the string passed in to be a char * value. I instead had the following
warning:
include/trace/events/qdisc.h: In function ‘trace_event_raw_event_qdisc_reset’:
include/trace/events/qdisc.h:91:35: error: passing argument 1 of 'strcmp' from incompatible pointer type [-Werror=incompatible-pointer-types]
91 | __assign_str(dev, qdisc_dev(q));
That's because the qdisc_enqueue() and qdisc_reset() pass in qdisc_dev(q)
to __assign_str() and to __string(). But that function returns a pointer
to struct net_device and not a string.
It appears that these events are just saving the pointer as a string and
then reading it as a string as well.
Use qdisc_dev(q)->name to save the device instead.
Fixes: a34dac0b90 ("net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parity calculation is necessary for VSC SDP implementation. Therefore
create new files dp_utils.c and dp_utils.h and move the parity
calculating functions here. This ensures that they are usable by SDP
programming in both dp_catalog.c and dp_audio.c
Changes in v3:
- Change ordering of the header byte macros
Changes in v2:
- Create new files dp_utils.c and dp_utils.h
- Move the parity calculation to these new files instead of
having them in dp_catalog.c and dp_catalog.h
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579617/
Link: https://lore.kernel.org/r/20240222194025.25329-13-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Change all relevant DP controller related programming for YUV420 cases.
Namely, change the pixel clock math to consider YUV420 and modify the
MVID programming to consider YUV420.
Changes in v2:
- Move configuration control programming to a different commit
- Slight code simplification
- Add VSC SDP check when doing mode_pclk_khz division in
dp_bridge_mode_valid
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579640/
Link: https://lore.kernel.org/r/20240222194025.25329-12-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Change relevant DP controller related programming for YUV420 cases.
Program the configuration control register to indicate YUV420.
Changes in v2:
- Create a new patch only for configuration control programming
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579615/
Link: https://lore.kernel.org/r/20240222194025.25329-11-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Widebus enablement is decided by the interfaces based on their specific
checks and that already happens with DSI/DP specific helpers. Let's
invoke these helpers from dpu_encoder_is_widebus_enabled() to make it
cleaner overall.
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579632/
Link: https://lore.kernel.org/r/20240222194025.25329-10-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In the DP driver, check if VSC SDP is supported and propagate this value
to dp_panel. In dp_display's dp_mode, the out_fmt_is_yuv_420 parameter
must also utilize this value since YUV420 is only allowed when VSC SDP
is supported.
Changes in v2:
- Move DP programming when VSC SDP is supported to this patch
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579625/
Link: https://lore.kernel.org/r/20240222194025.25329-9-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Wide bus is not supported when the mode is YUV420 in DP. In preparation
for changing the DPU programming to reflect this, the value and
assignment location of wide_bus_en for the DP submodules must be
changed. Move it from boot time in dp_init_sub_modules() to run time in
dp_display_mode_set.
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579614/
Link: https://lore.kernel.org/r/20240222194025.25329-8-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Rename wide_bus_en to wide_bus_supported in dp_display_private to
correctly establish that the parameter is referencing if wide bus is
supported instead of enabled.
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579613/
Link: https://lore.kernel.org/r/20240222194025.25329-7-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move dpu_encoder_helper_phys_setup_cdm to dpu_encoder in preparation for
implementing YUV420 over DP, which requires CDM compatibility.
Changes in v2:
- Slightly change the wording of the commit text to make clear
that YUV over DP requires CDM
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579611/
Link: https://lore.kernel.org/r/20240222194025.25329-6-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Generalize dpu_encoder_helper_phys_setup_cdm to be compatible with DP.
Changes in v2:
- Minor formatting changes
- Move the modification of the dimensions for CDM setup to a new
patch
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579609/
Link: https://lore.kernel.org/r/20240222194025.25329-5-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Modify the output width and height parameters of hw_cdm to utilize the
physical encoder's data instead of obtaining the information from the
framebuffer. CDM is to be set up to utilize the actual output data since
at CDM setup, there is no difference between the two sources.
Changes in v2:
- Move the modification of the dimensions for CDM setup to this
new patch
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579607/
Link: https://lore.kernel.org/r/20240222194025.25329-4-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Setting up the timing engine when the physical encoder has a split role
neglects dividing the drm_display_mode's hskew parameter. Let's fix this
since this must also be done in preparation for implementing YUV420 over
DP.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579605/
Link: https://lore.kernel.org/r/20240222194025.25329-3-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
CDM block supports formats other than H1V2 for DP. Since we are now
adding support for CDM over DP, relax the checks to allow all other
formats for DP other than H1V2.
Changes in v2:
- Add fixes tag
- Move patch to top of series
Fixes: 0afac0ba60 ("drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block")
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579606/
Link: https://lore.kernel.org/r/20240222194025.25329-2-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
active-low was lifted to the common schema for leds, but it went
unnoticed that the leds-multicolour binding had "additionalProperties:
false" where the other users had "unevaluatedProperties: false", thereby
disallowing active-low for multicolour leds. Explicitly permit it again.
Fixes: c94d178313 ("dt-bindings: net: phy: Make LED active-low property common")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3e2f544dd8 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
