Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com> says:
Add AudioReach support for LPASS Audio IF based TDM backends and wire it
up for the sc8280xp machine driver.
The series first adds topology-driven Audio IF source/sink handling so
the DSP interface parameters can be described by topology while runtime
media format and slot configuration still come from the machine driver.
It then adds TDM DAI operations for q6apm-lpass-dais, exposes the Audio
IF clock IDs through the q6dsp-lpass-ports binding and q6prm clock
tables, and introduces common QCOM helpers for parsing standard
dai-tdm-slot-* properties from backend CPU and codec endpoints.
Finally, sc8280xp uses the common helpers during hw_params to program
CPU and codec TDM slots, derive the backend bit clock from the active
PCM parameters, and request the CPU and codec clocks before the stream is
started.
Link: https://patch.msgid.link/20260804070307.117119-1-prasad.kumpatla@oss.qualcomm.com
Add TDM backend handling to the sc8280xp machine driver.
Use the common QCOM DAI-node TDM helper to parse the standard
DAI TDM slot properties from backend CPU and codec endpoints. Reuse the
parsed configuration when programming DAIs so hw_params does not need a
second DT traversal.
Derive the LPASS backend bit clock from the runtime TDM parameters and
request it through the backend child-clock path using LPAIF_MI2S_BCLK.
Program codec sysclk in hw_params so codec PLL setup happens before the
stream is triggered.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-8-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add common helpers to parse standard dai-tdm-slot-* properties from the
CPU and codec child nodes of a backend DAI link and apply the result to
the active DAIs.
QCOM machine drivers already use qcom_snd_parse_of() to build links from
DT, but they lacked a shared helper to translate endpoint TDM properties
into snd_soc_dai_set_tdm_slot() calls. Boards therefore had to carry ad
hoc parsing or rely on non-standard DT properties.
The helpers parse endpoint masks, validate the shared slot count and
slot width, and program CPU and codec DAIs with the resulting slot
configuration. A cfg-based apply helper is provided for callers that
already parsed the DT data and want to avoid a second DT traversal.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-7-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow standard dai-tdm-slot-* properties in the CPU and codec child
nodes of a DAI link.
The QCOM machine driver parses these child nodes to configure TDM slots
on the active CPU and codec DAIs. The properties are already defined by
the common tdm-slot binding, but qcom,sm8250.yaml currently rejects them
because the CPU and codec child nodes set additionalProperties: false.
Permit dai-tdm-slot-num, dai-tdm-slot-width and dai-tdm-slot-[rt]x-mask
there so boards using TDM backends can describe the slot layout without
schema warnings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-6-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the q6prm clock table entries and internal DSP clock IDs for LPASS
Audio IF backend clocks.
The public binding IDs map to q6prm DSP clock IDs starting at 0x500 for
Audio IF0 IBIT/EBIT. Add the internal definitions and register all Audio
IF IBIT and EBIT clocks so machine drivers can request them through the
APM clock controller.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-5-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the LPASS Audio IF clock IDs used by newer backend interfaces.
Platforms using Audio IF module backends request the interface bit
clocks through q6prm. Add the Audio IF IBIT and EBIT IDs to the binding
header so these clocks can be referenced from device trees.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-4-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add TDM DAI operations to q6apm-lpass-dais so AudioReach TDM
backends can be configured through the normal ASoC hw_params and DAI
setup flow.
The TDM set_tdm_slot() callback validates the supported slot width and
slot count, stores the active slot mask in the AudioReach module
configuration, and leaves existing DMA, I2S and HDMI paths unchanged.
Reuse the existing LPASS child-clock handling for TDM nodes as well as
MI2S nodes, since TDM backends also request optional backend clocks
through the machine driver set_sysclk() path.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-3-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add topology parsing and media-format programming for Audio IF source and
sink modules.
Add the Audio IF module IDs, the required topology tokens, and a dedicated
topology loader that stores the parsed interface configuration in the
AudioReach module state. Also add the Audio IF media-format path that
sends the interface configuration, hardware endpoint media format, and
frame-duration parameters for Audio IF modules.
This keeps the serial-interface configuration topology-driven while still
allowing the machine driver to provide runtime slot and media format
settings. The same Audio IF path can then be reused for TDM, PCM, and I2S
style backends.
The new UAPI tokens (AR_TKN_U16_MODULE_SYNC_SRC=262 through
AR_TKN_U8_MODULE_INV_EXT_BIT_CLK=276) are added, together with the value
defines used by the sync source, sync mode, data delay, interface mode,
bit clock type, and polarity tokens.
MODULE_ID_AUDIO_IF_SINK (0x0700117C) and MODULE_ID_AUDIO_IF_SOURCE
(0x0700117D) are introduced in this patch.
This Module is validated on Hawi and Shikra platforms.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-2-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
Improve handling of some corner cases that are not used by current topology
designs, but can be crafted within the rules of a topology file.
For example branching topologies, where a single input routed to multiple
output endpoints. The already configured part of the graph places constraint
on how the new branch can be configured.
Handling of process modules also updated to be able to 'guess' what
parameters can be changed by the module and allow flexible operation.
Link: https://patch.msgid.link/20260730121729.18673-1-peter.ujfalusi@linux.intel.com
If the module in path has been already prepared on a branch type of
topology, where the branching happens downstream:
A1--> A2 ---> B1 --> B2 ... B-branch
|-> C1 --> C2 ... C-branch
In this case if B-branch is started then A1/A2 is prepared, but when
C-branch starts we still need to refine the parameters up to C1 to arrive
with a correct params to configure C1.
This branching can happen with copiers process modules.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730121729.18673-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The process module can change different parameters in the audio path and
this change has to be properly evaluated and applied.
In case of playback we are converting from multiple input formats to a
single format (or just passing through without change), the output format
lookup must be based on the input format.
In case of capture, we are converting from a single input format to a
format which is to be passed to the FE, we need to use the input parameters
and the FE parameters to be able to find the correct format:
for those parameters that are modified by the module instance we need to
use the FE parameter while for the rest we use the input parameters.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730121729.18673-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on the input and output formats we can evaluate what param might be
changed by the module instance.
If there is a difference between the input rate/channels/format and the
output rate/channels/format it means that the module can change one or
multiple of the params.
Store this information during init for later use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730121729.18673-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A temporary refcount management of a struct device can be done
gracefully with __clean(put_device) for avoiding potential leaks.
No functional change but just a code cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260803135648.917760-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The called functions already log failures where appropriate. Return the
original error directly and avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260731101539.36290-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct a few white-space issues, like double space after '=' character,
which will be flagged by dt-check-style. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801195425.234120-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix swiotlb initialization on systems where DRAM is located above
4GiB (such as the Tenstorrent Blackhole cards)
- Fix an out-of-bounds access in the memory hot-remove code that can
occur on Sv39 and Sv48 systems
- Avoid oopsing during boot if the SBI component of the unaligned
access performance checking code loses a race against __init
function freeing
- Avoid attempting to install the debug-enabled vDSO when it shouldn't
be built due to !CONFIG_MMU
- Avoid some sparse warnings by adding missing __iomem notations
in get_cycles{,_hi}()
- Drop an unnecessary runtime warning in the SiFive errata handler
-----BEGIN PGP SIGNATURE-----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=gw8o
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix swiotlb initialization on systems where DRAM is located above
4GiB (such as the Tenstorrent Blackhole cards)
- Fix an out-of-bounds access in the memory hot-remove code that can
occur on Sv39 and Sv48 systems
- Avoid oopsing during boot if the SBI component of the unaligned
access performance checking code loses a race against __init function
freeing
- Avoid attempting to install the debug-enabled vDSO when it shouldn't
be built due to !CONFIG_MMU
- Avoid some sparse warnings by adding missing __iomem notations in
get_cycles{,_hi}()
- Drop an unnecessary runtime warning in the SiFive errata handler
* tag 'riscv-for-linus-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: vdso: Only try to install vDSO when present
riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove
riscv: drop __init from vec_check_unaligned_access_speed_all_cpus
riscv: mm: fix SWIOTLB initialization for systems with DRAM above 4GB
riscv/sifive: remove warning in errata
riscv: time: Add missing __iomem in get_cycles() and get_cycles_hi()
- Fix PCI MMIO write syscall falsely reporting success for mappings not
valid for MMIO when MIO is unavailable by returning -EFAULT
- Fix CPRB parameter buffer overflows in zcrypt CCA AES cipher and ECC
private key conversion by rejecting oversized key tokens
- Fix buffer overreads and length underflow in pkey and zcrypt CCA token
validation by checking length fields against actual buffer sizes
- Fix out of bounds permission bitmap access in zcrypt EP11 admin CPRB
filtering on custom device nodes by using AP_DOMAINS as the limit
- Fix speculative permission bitmap reads in zcrypt CCA and EP11 admin
CPRB handling by sanitizing user controlled domain indexes
- Fix sensitive key material left in zcrypt CCA clear key import buffers
by scrubbing CPRB and temporary buffers after use
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmpvT7gACgkQjYWKoQLX
FBg7qAf/eDHPqcayM4/Rasf3P+KVoIquyl0BjBI41Lf348em9ffLdvGI+PmSgo3s
CVOPmsQY1zn4UvWrU3Wn0/Kmgo7U4xv6ODDUbvuTbjr7gUigMOYPoH3zShQJW8dY
bJ5UnbtYC5ZMpnkEFQi4F1xNd3IoOFQLnbUPaFd+5S+slUJygGNh4XjEBEUfo3yS
dyly7GWgml2obf2R4IfRG1ItP4hY8OWo0K9XrDJomh+s5WfkFy5QMlL6uEsuXzcR
iqEPTaHblvz5FhEozZmmFppM3GVclyLouxZTHYHP32OaoLOIgF9NNW4WUmXodyF/
efMV21LmtCjMcLrM4LQ1PohTtXgG+A==
=U3To
-----END PGP SIGNATURE-----
Merge tag 's390-7.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Fix PCI MMIO write syscall falsely reporting success for mappings not
valid for MMIO when MIO is unavailable by returning -EFAULT
- Fix CPRB parameter buffer overflows in zcrypt CCA AES cipher and ECC
private key conversion by rejecting oversized key tokens
- Fix buffer overreads and length underflow in pkey and zcrypt CCA
token validation by checking length fields against actual buffer
sizes
- Fix out of bounds permission bitmap access in zcrypt EP11 admin CPRB
filtering on custom device nodes by using AP_DOMAINS as the limit
- Fix speculative permission bitmap reads in zcrypt CCA and EP11 admin
CPRB handling by sanitizing user controlled domain indexes
- Fix sensitive key material left in zcrypt CCA clear key import
buffers by scrubbing CPRB and temporary buffers after use
* tag 's390-7.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey()
s390/zcrypt: Close speculative mem read possibility
s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
s390/zcrypt: Validate length for CCA ECC private key requests
s390/zcrypt: Validate length for CCA AES cipher key requests
s390/pci: Fix s390_pci_mmio_write syscall error return without MIO
- Fix the boot-time memcmp() asm implementation's constraints
and optimization properties (Mauricio Faria de Oliveira)
- Move the 0xd0...0xd7 AMD Zen5 model range from the Zen6
range where it mistakenly ended up (Pratik Vishwakarma)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EHql
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix the boot-time memcmp() asm implementation's constraints
and optimization properties (Mauricio Faria de Oliveira)
- Move the 0xd0...0xd7 AMD Zen5 model range from the Zen6
range where it mistakenly ended up (Pratik Vishwakarma)
* tag 'x86-urgent-2026-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Carve out a Zen5 models range
x86/boot: Add volatile, clobbers and zero-length test in memcmp()
Please consider pulling these changes from the signed vfs-7.2-rc6.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCam8K1wAKCRCRxhvAZXjc
oicvAP9SaD+BOfpqRkICUIrZ/Lz+x3bIn1a0/yjgDQlPE1xJmQD+JCqIVnvUDN2U
m89mFy/4Mq9FYnuHZ6LWMAeYYIx3OQM=
=+294
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.2-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"binfmt_misc:
- Don't let an 'F' entry pin its own instance.
An entry registered with 'F' opens its interpreter at registration
time and holds that file until the entry is freed, so an entry
nobody removes by hand is only closed once the binfmt_misc
superblock is shut down.
If the interpreter lives on a mount that keeps that superblock
alive the two pin each other and the file is never closed. That's
reachable by pointing the interpreter at the instance itself or by
using the instance as an overlayfs lower layer, and once the mount
namespace is gone there's nothing left to unregister through
either.
- Restore write access when removing an entry.
Registering with the MISC_FMT_OPEN_FILE flag opens the interpreter
via open_exec() which denies write access for as long as the entry
exists, but removal only did filp_close() and never restored it.
The inode's i_writecount stayed permanently negative and opening
the interpreter for writing kept failing with ETXTBSY long after
the entry was gone.
- Use exe_file_deny_write_access() for the interpreter clone so both
sides base their decision on the same mode.
- Reject a flag character as the field delimiter. create_entry() pads
the buffer with the delimiter so the field parsers terminate even
on a truncated string, but check_special_flags() consumes flag
characters instead of scanning for the delimiter.
If the delimiter is itself a flag character the padding stops
acting as a terminator and the scan keeps reading past the end of
the allocation. Such a registration was always rejected, just only
after the out of bounds read has already happened.
- Don't leak the user namespace when the mount fails.
bm_get_tree() hands its reference to get_tree_keyed() and sget_fc()
moves it into sb->s_fs_info, but generic_shutdown_super() only
calls ->put_super() from inside the if (sb->s_root) branch and
bm_fill_super() can fail before either s_root or s_op is in place.
Drop the reference in ->kill_sb() instead, which runs
unconditionally.
netfs:
- Clear PG_private_2 on a copy-to-cache append failure.
- Handle a rolling buffer allocation failure in single-object
writeback and drop the extra folio reference
netfs_write_folio_single() took before the append.
- Release the previously batched readahead folios when
rolling_buffer_load_from_ra() fails in
netfs_prepare_read_iterator()
- Fix the folio_queue ENOMEM in writeback by adding a mempool and
passing gfp flags into the rolling buffer helpers.
iomap:
- Add a separate bio_set for iomap_split_ioend(). It can split bios
that already come from iomap_ioend_bioset and deadlock once that
bioset is exhausted.
afs:
- Set call->async for an asynchronous afs_fs_fetch_data() the way
afs_fs_fetch_data64() already does.
- Subtract subreq->transferred from subreq->len in
afs_fs_fetch_data() rather than adding it.
- Fix a UAF when sending a message"
* tag 'vfs-7.2-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: add a separate bio_set for iomap_split_ioend
binfmt_misc: don't leak the user namespace when the mount fails
binfmt_misc: reject a flag character as the field delimiter
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
binfmt_misc: restore write access when removing an entry
binfmt_misc: don't let an 'F' entry pin its own instance
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
netfs: release readahead folios on iterator preparation failure
netfs: handle single writeback rolling buffer allocation failure
netfs: clear PG_private_2 on copy-to-cache append failure
afs: Fix UAF when sending a message
afs: Fix afs_fs_fetch_data() to subtract transferred from len
afs: Fix afs_fs_fetch_data() to set call->async
No core changes. The largest driver fix is the reversion of threaded
interrupt handlers in UFS and the next is the resume deadlock fix in
hisi_sas which extends into libsas.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCam86+xsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIVcnwD/QWD/DCvLd533SY0vE2fZYVYnUVi3uzAy
OGkbmxKtCSABAO/djRxNN1CTDtVXnhUhp/VLn0niXfy4jLmCkoWpnD2N
=ERuj
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley"
"No core changes. The largest driver fix is the reversion of threaded
interrupt handlers in UFS and the next is the resume deadlock fix in
hisi_sas which extends into libsas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Initialize hba->rpmbs list in ufshcd
scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit
scsi: target: Clear cmd_cnt when initial counter enrollment fails
scsi: zfcp: Fix memory leak during adapter release by destroying gid_pn_req
scsi: ufs: core: Revert "Delegate the interrupt service routine to a threaded IRQ handler"
scsi: ufs: core: Cancel RTC work in active-active suspend
scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write
scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE
scsi: ufs: dt-bindings: Add missing mcq reg for qcom,sa8255p-ufshc
scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race
scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer
scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer
- amd-mp2: unregister callback if adapter registration fails
- designware: defer probe until child GPIO controllers are bound
- imx:
- mark adapter suspended while hardware is powered down
- fix stale slave pointer and shared IRQ registration race
- stop slave timer before clearing slave pointer
- iproc: reset controller if START_BUSY remains set after timeout
- jz4780: cache clock rate to avoid clk_get_rate() deadlock
- qcom-cci: rely on runtime PM helpers for system sleep
- spacemit: request interrupt after clock initialization
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCam2wKAAKCRDaeAVmJtMt
bqfFAP0V1w4b6tyH2a2LUM3dpL83OjhGnMi1xsBO9fAybv0kWAD/aRICEDDENJPh
SxD+DpQ7xH3inwBR+akLeqMAHfSfOgE=
=M+Cd
-----END PGP SIGNATURE-----
Merge tag 'i2c-fixes-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c fixes from Andi Shyti:
"A set of fixes across several host controller drivers. The largest
part addresses three issues in the i.MX driver, while the remaining
changes fix probe ordering, power management, timeout recovery and
error handling.
amd-mp2:
- unregister callback if adapter registration fails
designware:
- defer probe until child GPIO controllers are bound
imx:
- mark adapter suspended while hardware is powered down
- fix stale slave pointer and shared IRQ registration race
- stop slave timer before clearing slave pointer
iproc:
- reset controller if START_BUSY remains set after timeout
jz4780:
- cache clock rate to avoid clk_get_rate() deadlock
qcom-cci:
- rely on runtime PM helpers for system sleep
spacemit:
- request interrupt after clock initialization"
* tag 'i2c-fixes-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: qcom-cci: drop custom suspend/resume and rely on runtime PM helpers
i2c: imx: Cancel hrtimer before clearing slave pointer
i2c: imx: Fix slave registration race and error handling
i2c: iproc: reset bus after timeout if START_BUSY is stuck
i2c: imx: mark I2C adapter when hardware is powered down
i2c: designware: defer probe if child GpioInt controllers are not bound
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
i2c: amd-mp2: Unregister callback on adapter add failure
i2c: spacemit: request IRQ after controller initialization
- Fix regression with MO= when building out of tree kernel modules due
to incorrectly overwriting build tree's Makefile
- Avoid stripping .BTF sections from modules when building debug .rpm
packages
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCam1cngAKCRAdayaRccAa
lt/FAQDqTsqzD4FKeeOUkyoIahT+l31Spa0VNUTMa+EwEv24WwEAjExf66Ch7rVe
KRdLXdDUSRI8TZiDZeibf8kGx0i+PwQ=
=1d+/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix regression with MO= when building out of tree kernel modules due
to incorrectly overwriting build tree's Makefile
- Avoid stripping .BTF sections from modules when building debug .rpm
packages
* tag 'kbuild-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: rpm-pkg: Preserve BTF sections in kernel modules during debuginfo stripping
kbuild: Stop modifying $(objtree)/Makefile when building oot-kmods oos
- Reset dropped_count in mmio_reset_data()
When mmio_reset_data() is called, it does not reset the dropped_count
so that subsequent runs will have incorrect reporting.
- Add NULL check for mmio_trace_array in logging functions
The functions __trace_mmiotrace_rw() and __trace_mmiotrace_map()
may have the 'tr' variable passed to it as NULL. But they both
dereference it without checking if it is NULL first.
- Check return value of __register_event() in trace_module_add_events()
If __register_event() fails, the call after it (__add_event_to_tracers())
will create a file for it. If the module fails to load and its memory
is freed, the file will still point to it and it will not be removed
as the registering of the event did not complete. Only call
__add_event_to_tracers() if the __register_event() was successful.
- Fix false positive match in regex_match_full()
The regex full matching uses a strncmp() to test against the match
string and the value. It should not match if value is a prefix of
the string to match. Check to make sure the length of the strings
match before comparing.
- Fix reader page read offset for remote buffers
A page swapped in by __rb_get_reader_page_from_remote() retains its
stale read offset, causing subsequent reads to skip events or read
past valid data.
- Fix memory leak of subbuf_ids in rb_allocate_cpu_buffer()
Remote buffers allocate a subbuf_ids array. If the allocator function
fails after it is allocated, it does not free it, resulting in a
memory leak.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCam1A0RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlW/AQDCpddDwAMwN80i3tn5uiqec9JLZT5I
DR6G+0zEF9a5DAD2IxiD3gH/mPVZ3CdiqfElBqjc0Pq1dx414xmzXBv+CA==
=GUpD
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Reset dropped_count in mmio_reset_data()
When mmio_reset_data() is called, it does not reset the dropped_count
so that subsequent runs will have incorrect reporting.
- Add NULL check for mmio_trace_array in logging functions
The functions __trace_mmiotrace_rw() and __trace_mmiotrace_map() may
have the 'tr' variable passed to it as NULL. But they both
dereference it without checking if it is NULL first.
- Check return value of __register_event() in trace_module_add_events()
If __register_event() fails, the __add_event_to_tracers() call after
it will create a file for it. If the module fails to load and its
memory is freed, the file will still point to it and it will not be
removed as the registering of the event did not complete.
Only call __add_event_to_tracers() if the __register_event() was
successful.
- Fix false positive match in regex_match_full()
The regex full matching uses a strncmp() to test against the match
string and the value. It should not match if value is a prefix of the
string to match. Check to make sure the length of the strings match
before comparing.
- Fix reader page read offset for remote buffers
A page swapped in by __rb_get_reader_page_from_remote() retains its
stale read offset, causing subsequent reads to skip events or read
past valid data.
- Fix memory leak of subbuf_ids in rb_allocate_cpu_buffer()
Remote buffers allocate a subbuf_ids array. If the allocator function
fails after it is allocated, it does not free it, resulting in a
memory leak.
* tag 'trace-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix subbuf_ids memory leak in rb_allocate_cpu_buffer() error path
ring-buffer: Fix reader page read offset for remote buffers
tracing/filters: Fix false positive match in regex_match_full()
tracing: Check return value of __register_event() in trace_module_add_events()
tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions
tracing/mmiotrace: Reset dropped_count in mmio_reset_data()
bui duc phuc <phucduc.bui@gmail.com> says:
While cleaning up the SPEAr SPDIF driver probe path by removing
redundant error messages, build testing revealed several compilation
failures caused by outdated ASoC APIs.
The series first removes the redundant error messages, then updates the
driver to match the current ASoC APIs by replacing the removed
capture_dma_data field usage with the corresponding helper API, and
moving the DAI probe callback to struct snd_soc_dai_ops.
Link: https://patch.msgid.link/20260730095407.33894-1-phucduc.bui@gmail.com
The .probe callback is no longer part of struct snd_soc_dai_driver
and is now provided through struct snd_soc_dai_ops.
Move spdif_soc_dai_probe() accordingly so the driver follows the current
ASoC API and builds correctly on modern kernels.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .probe callback is no longer part of struct snd_soc_dai_driver
and is now provided through struct snd_soc_dai_ops.
Move spdif_in_dai_probe() accordingly so the driver follows the current
ASoC API and builds correctly on modern kernels.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the legacy direct access to dai->capture_dma_data with
snd_soc_dai_dma_data_set_capture().
The capture_dma_data field no longer exists in struct snd_soc_dai,
making the previous implementation incompatible with current ASoC APIs.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The called functions already log failures where appropriate. Return the
original error directly and avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
This is v3 of "ASoC: use .auto_selectable_formats", but separated into
small blocks. It is Step1, and it will be Step4 in total.
x: this patch-set
[x] Step1: ASoC: a to b
[ ] Step2: ASoC: codec: ...
[ ] Step3: ASoC: d to r
[ ] Step4: ASoC: r to x
Current ASoC supports snd_soc_daifmt_parse_format() which can specify DAI
format by "dai-format" property from DT.
But strictly speaking, it is SW settings, so doesn't match to DT's policy.
Current ASoC is supporting auto format select via
snd_soc_dai_ops :: .auto_selectable_formats.
But the user is very few today.
DT doesn't need to specify the DAI format via "dai-format", if both CPU
and Codec drivers were supporting .auto_selectable_formats. It will be
automatically selected from .auto_selectable_formats.
One note is that auto select might not find best format on some CPU/Codec
combination. So "dai-format" is necessary anyway.
Link: https://lore.kernel.org/r/8733zfj5jj.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87pl0r20qo.wl-kuninori.morimoto.gx@renesas.com
Link: https://patch.msgid.link/87zezljgxy.wl-kuninori.morimoto.gx@renesas.com
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
This series adds sound support for the Monaco/Monza (VENTUNO-Q)
platform on the QCS8275 board, which uses a MAX98091 codec on an
LPI MI2S link.
Patch 2 (from Neil) registers the LPASS MCLK1..MCLK5 clock IDs in
q6prm-clocks.c. Without these entries the DT clock reference
"clocks = <&q6prmcc LPASS_CLK_ID_MCLK_3 ...>" that the MAX98091
node uses cannot resolve at probe, and the codec silently runs
without MCLK.
Note: this patch has been posted to the list more than once from Oct
2025 and does not appear to be actively pursued by anyone. I
am picking it up here because the rest of this series depends on
it to get sound working on QCS8275, and it makes little sense to
send the machine-driver changes without the clock IDs they rely
on.
With these patches now we have full audio working on Arduino VENTUNO-Q.
Link: https://patch.msgid.link/20260731162626.1588561-1-srinivas.kandagatla@oss.qualcomm.com
- Keep RECALL_ON_OPEN in inode flags when reloading them from $FILE_NAME.
- Check runlist reallocation sizes for negative values and overflow.
- Drop stale page cache after shrinking non-resident attributes to prevent
writeback failures and data loss.
-----BEGIN PGP SIGNATURE-----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=/w7C
-----END PGP SIGNATURE-----
Merge tag 'ntfs-for-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs fixes from Namjae Jeon:
- Keep RECALL_ON_OPEN in inode flags when reloading them from
$FILE_NAME
- Check runlist reallocation sizes for negative values and overflow
- Drop stale page cache after shrinking non-resident attributes to
prevent writeback failures and data loss
* tag 'ntfs-for-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: drop stale page-cache when shrinking a non-resident attr
ntfs: harden runlist realloc size calculations
ntfs: preserve RECALL_ON_OPEN on WSL special-file reparse points
-----BEGIN PGP SIGNATURE-----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=l3O8
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Use memcmp() when comparing fixed-size binary ClientGUIDs, so
embedded NUL bytes are handled correctly
- Reject repeated SMB2 NEGOTIATE requests after dialect selection
This prevents preauth_info leaks, enforces the SMB2 protocol
requirements, and serializes negotiation state updates.
- Fix a use-after-free in __close_file_table_ids() by removing the
volatile file ID from the owning IDR before dropping the IDR
reference
* tag 'v7.2-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use memcmp() to compare ClientGUIDs
ksmbd: reject repeated SMB2 NEGOTIATE requests
ksmbd: fix use-after-free in __close_file_table_ids()
- Fix PCI resource initialization in the sata_mv driver to keep legacy
Marvell boards functional (Rosen).
- Fix ahci_ceva driver initialization error path (Radhey).
- Fix libata header file to remove a kernel doc compilation warning
(Randy).
- Increase the timeout for the STANDBY IMMEDIATE command to avoid
suspend failures with drives that are slow to respond to this command
(Matt).
- Fixes for the handling of timed out commands in the presence of
deferred non-NCQ commands, to avoid excessive delays in executing the
error handler (me).
- Disable link power management for a couple of WD drives that have
been identified as not functioning properly when power management is
used (Niklas).
- Fix the device iteration loop when checking for link power management
support to correctly handle port multiplier setups (Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCam01HgAKCRDdoc3SxdoY
dv7zAP9Fc6HE7yW9XtTWmHHDC/pqVBuxIpaWXggcBMPCY4GzkgD+MgA97IsQf6QU
4kun74jcJuZJzBbMjBNLesIzPaYQ5Qo=
=qRqX
-----END PGP SIGNATURE-----
Merge tag 'ata-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix PCI resource initialization in the sata_mv driver to keep legacy
Marvell boards functional (Rosen)
- Fix ahci_ceva driver initialization error path (Radhey)
- Fix libata header file to remove a kernel doc compilation warning
(Randy)
- Increase the timeout for the STANDBY IMMEDIATE command to avoid
suspend failures with drives that are slow to respond to this command
(Matt)
- Fixes for the handling of timed out commands in the presence of
deferred non-NCQ commands, to avoid excessive delays in executing the
error handler (me)
- Disable link power management for a couple of WD drives that have
been identified as not functioning properly when power management is
used (Niklas)
- Fix the device iteration loop when checking for link power management
support to correctly handle port multiplier setups (Niklas)
* tag 'ata-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: fix ata_scsi_lpm_supported() iteration
ata: libata-core: Disable LPM on WD Green 2.5 480GB
ata: libata-core: Disable LPM on some WD drives
scsi: libsas: terminate deferred commands on time out
ata: libata-scsi: schedule deferred atapi command
ata: libata-scsi: terminate deferred commands on time out
ata: libata-eh: Increase STANDBY IMMEDIATE timeout
ata: libata: avoid kernel-doc warnings
ata: ahci_ceva: fix error paths in ceva_ahci_platform_enable_resources()
ata: sata_mv: accept 1 or 2 resources in platform probe
In rb_allocate_cpu_buffer(), cpu_buffer->subbuf_ids is allocated using
kcalloc() when buffer->remote is non-NULL. If a subsequent page allocation
fails (e.g., ring_buffer_desc_page() returns NULL or rb_allocate_pages()
fails), execution jumps to fail_free_reader.
While __free(kfree) automatically frees the outer cpu_buffer structure
at scope exit, kfree(cpu_buffer) does not recursively free nested heap
pointers such as cpu_buffer->subbuf_ids, resulting in a memory leak.
Fix this by explicitly freeing cpu_buffer->subbuf_ids in the
fail_free_reader error unwinding path when cpu_buffer->remote is set.
Link: https://patch.msgid.link/178550740672.380917.6067449683620196150.stgit@devnote2
Fixes: 2e67fabd8b ("ring-buffer: Introduce ring-buffer remotes")
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The driver-local structure was named 'snd_soc_common', which occupies
the generic snd_soc_ ASoC namespace even though it is specific to the
Qualcomm sc8280xp machine driver.
Rename the type to qcom_snd_soc_common so the identifier is properly
scoped to this driver, and rename the pointer field in
sc8280xp_snd_data from 'snd_soc_common_priv' to 'priv' so the shorter
name doesn't repeat the type name at every use.
No functional change.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260731162626.1588561-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing MCLK ids for the q6prm DSP interface.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260731162626.1588561-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not all codecs implement the set_sysclk operation. When the board
enables codec_sysclk_set, snd_soc_dai_set_sysclk() on the codec DAI
can return -ENOTSUPP, which currently aborts hw_params and breaks
playback/capture on such boards even though the missing clock setup
is harmless.
Ignore -ENOTSUPP for the codec set_sysclk call.
Fixes: 766f3f79c3 ("ASoC: qcom: sc8280xp: enhance machine driver for board-specific config")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260731162626.1588561-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----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=kkrB
-----END PGP SIGNATURE-----
Merge tag 'block-7.2-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- A set of fixes for s390/dasd, via Stefan
- Fix for a missing stop of the timeout timer, if a disk has never been
added
- Clear kernel owned fields on ublk setup by default
* tag 'block-7.2-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
s390/dasd: Fix undersized format-check buffer
s390/dasd: Fix potential NULL pointer dereference
s390/dasd: Fix path verification interrupted by concurrent dasd_sleep_on_immediatly
block: stop the timeout timer when releasing a never added disk
ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev()
Richard Acayan <mailingradian@gmail.com> says:
This adds support for the SDM660 (formerly "SDM660 internal") sound card
and support for WCD codecs over internal MI2S (represented in APIs as
LPI MI2S).
Like on MSM8916 and MSM8953, some SDM660 and SDM670 devices connect to a
digital and analog codec. The connection to the digital codec is through
special "internal" MI2S ports. The digital and analog codecs are used on
the Xiaomi Redmi Note 7 for headset (playback + capture) and earpiece,
and also on the Google Pixel 3a for the headset.
This series does not include devicetree patches.
Link: https://patch.msgid.link/20260730174353.108023-1-mailingradian@gmail.com
