commit f561db72a6 upstream.
It was observed on sc7180 (A618 gpu) that GPU votes for GX rail and CNOC
BCM nodes were not removed after GPU suspend. This was because we
skipped sending 'prepare-slumber' request to gmu during suspend sequence
in some cases. So, make sure we always call prepare-slumber hfi during
suspend. Also, calling prepare-slumber without a prior oob-gpu handshake
messes up gmu firmware's internal state. So, do that when required.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Cc: stable@vger.kernel.org
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/639569/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c28f72c6ca upstream.
ast_dp_is_connected() used to also check for link training success
to report the DP connector as connected. Without this check, the
physical_status is always connected. So if no monitor is present, it
will fail to read the EDID and set the default resolution to 640x480
instead of 1024x768.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 2281475168 ("drm/ast: astdp: Perform link training during atomic_enable")
Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Tested-by: Jose Lopez <jose.lopez@hpe.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124141142.2434138-1-jfalempe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d098000ac upstream.
There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.
For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd->stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.
Mitigate this by casting 'epd->factored_stage_time' to wider type before
any multiplication is done.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3589211e9b ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 506f981ab4 upstream.
The scale of IIO bandwidth in free running counters is inherited from
the ICX. The counter increments for every 32 bytes rather than 4 bytes.
The IIO bandwidth out free running counters don't increment with a
consistent size. The increment depends on the requested size. It's
impossible to find a fixed increment. Remove it from the event_descs.
Fixes: 0378c93a92 ("perf/x86/intel/uncore: Support IIO free-running counters on Sapphire Rapids server")
Reported-by: Tang Jun <dukang.tj@alibaba-inc.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-3-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32c7f11502 upstream.
There was a mistake in the ICX uncore spec too. The counter increments
for every 32 bytes rather than 4 bytes.
The same as SNR, there are 1 ioclk and 8 IIO bandwidth in free running
counters. Reuse the snr_uncore_iio_freerunning_events().
Fixes: 2b3b76b5ec ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Reported-by: Tang Jun <dukang.tj@alibaba-inc.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-2-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96a720db59 upstream.
There was a mistake in the SNR uncore spec. The counter increments for
every 32 bytes of data sent from the IO agent to the SOC, not 4 bytes
which was documented in the spec.
The event list has been updated:
"EventName": "UNC_IIO_BANDWIDTH_IN.PART0_FREERUN",
"BriefDescription": "Free running counter that increments for every 32
bytes of data sent from the IO agent to the SOC",
Update the scale of the IIO bandwidth in free running counters as well.
Fixes: 210cc5f9db ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71dcc11c2c upstream.
Currently when a user samples user space GPRs (--user-regs option) with
PEBS, the user space GPRs actually always come from software PMI
instead of from PEBS hardware. This leads to the sampled GPRs to
possibly be inaccurate for single PEBS record case because of the
skid between counter overflow and GPRs sampling on PMI.
For the large PEBS case, it is even worse. If user sets the
exclude_kernel attribute, large PEBS would be used to sample user space
GPRs, but since PEBS GPRs group is not really enabled, it leads to all
samples in the large PEBS record to share the same piece of user space
GPRs, like this reproducer shows:
$ perf record -e branches:pu --user-regs=ip,ax -c 100000 ./foo
$ perf report -D | grep "AX"
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
So enable GPRs group for user space GPRs sampling and prioritize reading
GPRs from PEBS. If the PEBS sampled GPRs is not user space GPRs (single
PEBS record case), perf_sample_regs_user() modifies them to user space
GPRs.
[ mingo: Clarified the changelog. ]
Fixes: c22497f583 ("perf/x86/intel: Support adaptive PEBS v4")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-2-dapeng1.mi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcf27a6a92 upstream.
On some platforms it has been observed that STT limits are not being
applied properly causing poor performance as power limits are set too low.
STT limits that are sent to the platform are supposed to be in Q8.8
format. Convert them before sending.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Cc: stable@vger.kernel.org
Tested-by: Yijun Shen <Yijun_Shen@Dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58029c39cd upstream.
Some operations require checking, or ignoring, specific bits in an address
value. For example, this can be comparing address values to identify unique
structures.
Currently, the full address value is compared when filtering for duplicates.
This results in over counting and creation of extra records. This gives the
impression that more unique events occurred than did in reality.
Mask the address for physical rows on MI300.
[ bp: Simplify. ]
Fixes: 6f15e617cc ("RAS: Introduce a FRU memory poison manager")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c44e5354d upstream.
Based on feedback from hardware folks, row[13] is part of the variable
bits within a physical row (along with all column bits).
Only half the physical addresses affected by a row are calculated if
this bit is not included.
Add the row[13] bit to the row retirement flow.
Fixes: 3b566b30b4 ("RAS/AMD/ATL: Add MI300 row retirement support")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250401-fix-fmpm-extra-records-v1-1-840bcf7a8ac5@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45f5dcdd04 upstream.
struct rdma_cm_id has member "struct work_struct net_work"
that is reused for enqueuing cma_netevent_work_handler()s
onto cma_wq.
Below crash[1] can occur if more than one call to
cma_netevent_callback() occurs in quick succession,
which further enqueues cma_netevent_work_handler()s for the
same rdma_cm_id, overwriting any previously queued work-item(s)
that was just scheduled to run i.e. there is no guarantee
the queued work item may run between two successive calls
to cma_netevent_callback() and the 2nd INIT_WORK would overwrite
the 1st work item (for the same rdma_cm_id), despite grabbing
id_table_lock during enqueue.
Also drgn analysis [2] indicates the work item was likely overwritten.
Fix this by moving the INIT_WORK() to __rdma_create_id(),
so that it doesn't race with any existing queue_work() or
its worker thread.
[1] Trimmed crash stack:
=============================================
BUG: kernel NULL pointer dereference, address: 0000000000000008
kworker/u256:6 ... 6.12.0-0...
Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm)
RIP: 0010:process_one_work+0xba/0x31a
Call Trace:
worker_thread+0x266/0x3a0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
=============================================
[2] drgn crash analysis:
>>> trace = prog.crashed_thread().stack_trace()
>>> trace
(0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15)
(1) __crash_kexec (kernel/crash_core.c:122:4)
(2) panic (kernel/panic.c:399:3)
(3) oops_end (arch/x86/kernel/dumpstack.c:382:3)
...
(8) process_one_work (kernel/workqueue.c:3168:2)
(9) process_scheduled_works (kernel/workqueue.c:3310:3)
(10) worker_thread (kernel/workqueue.c:3391:4)
(11) kthread (kernel/kthread.c:389:9)
Line workqueue.c:3168 for this kernel version is in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
>>> trace[8]["work"]
*(struct work_struct *)0xffff92577d0a21d8 = {
.data = (atomic_long_t){
.counter = (s64)536870912, <=== Note
},
.entry = (struct list_head){
.next = (struct list_head *)0xffff924d075924c0,
.prev = (struct list_head *)0xffff924d075924c0,
},
.func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280,
}
Suspicion is that pwq is NULL:
>>> trace[8]["pwq"]
(struct pool_workqueue *)<absent>
In process_one_work(), pwq is assigned from:
struct pool_workqueue *pwq = get_work_pwq(work);
and get_work_pwq() is:
static struct pool_workqueue *get_work_pwq(struct work_struct *work)
{
unsigned long data = atomic_long_read(&work->data);
if (data & WORK_STRUCT_PWQ)
return work_struct_pwq(data);
else
return NULL;
}
WORK_STRUCT_PWQ is 0x4:
>>> print(repr(prog['WORK_STRUCT_PWQ']))
Object(prog, 'enum work_flags', value=4)
But work->data is 536870912 which is 0x20000000.
So, get_work_pwq() returns NULL and we crash in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
=============================================
Fixes: 925d046e7e ("RDMA/core: Add a netevent notifier to cma")
Cc: stable@vger.kernel.org
Co-developed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/bf0082f9-5b25-4593-92c6-d130aa8ba439@oracle.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f05fd9a3b upstream.
ufshcd_link_startup() can call ufshcd_vops_link_startup_notify()
multiple times when retrying. This causes the phy reference count to
keep increasing and the phy to not properly re-initialize.
If the phy has already been previously powered on, first issue a
phy_power_off() and phy_exit(), before re-initializing and powering on
again.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-4-96722cc2ba1b@linaro.org
Fixes: 3d73b200f9 ("scsi: ufs: ufs-exynos: Change ufs phy control sequence")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aad9945623 upstream.
A firmware bug was observed where ATA VPD inquiry commands with a
zero-length data payload were not handled and failed with a non-standard
status code of 0xf0.
Avoid sending ATA VPD inquiry commands without data payload by setting
the device no_vpd_size flag to 1. In addition, if the firmware returns a
status code of 0xf0, set scsi_cmnd->result to CHECK_CONDITION to
facilitate proper error handling.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250402193735.5098-1-chandrakanth.patil@broadcom.com
Tested-by: Ryan Lahfa <ryan@lahfa.xyz>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d54d610243 upstream.
Communicating with the hypervisor using the shared GHCB page requires
clearing the C bit in the mapping of that page. When executing in the
context of the EFI boot services, the page tables are owned by the
firmware, and this manipulation is not possible.
So switch to a different API for accepting memory in SEV-SNP guests, one
which is actually supported at the point during boot where the EFI stub
may need to accept memory, but the SEV-SNP init code has not executed
yet.
For simplicity, also switch the memory acceptance carried out by the
decompressor when not booting via EFI - this only involves the
allocation for the decompressed kernel, and is generally only called
after kexec, as normal boot will jump straight into the kernel from the
EFI stub.
Fixes: 6c32117963 ("x86/sev: Add SNP-specific unaccepted memory support")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250404082921.2767593-8-ardb+git@google.com # discussion thread #1
Link: https://lore.kernel.org/r/20250410132850.3708703-2-ardb+git@google.com # discussion thread #2
Link: https://lore.kernel.org/r/20250417202120.1002102-2-ardb+git@google.com # final submission
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 263e55949d upstream.
Erratum 1054 affects AMD Zen processors that are a part of Family 17h
Models 00-2Fh and the workaround is to not set HWCR[IRPerfEn]. However,
when X86_FEATURE_ZEN1 was introduced, the condition to detect unaffected
processors was incorrectly changed in a way that the IRPerfEn bit gets
set only for unaffected Zen 1 processors.
Ensure that HWCR[IRPerfEn] is set for all unaffected processors. This
includes a subset of Zen 1 (Family 17h Models 30h and above) and all
later processors. Also clear X86_FEATURE_IRPERF on affected processors
so that the IRPerfCount register is not used by other entities like the
MSR PMU driver.
Fixes: 232afb5578 ("x86/CPU/AMD: Add X86_FEATURE_ZEN1")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/caa057a9d6f8ad579e2f1abaa71efbd5bd4eaf6d.1744956467.git.sandipan.das@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 805b743fc1 upstream.
All Zen5 machines out there should get BIOS updates which update to the
correct microcode patches addressing the microcode signature issue.
However, silly people carve out random microcode blobs from BIOS
packages and think are doing other people a service this way...
Block loading of any unreleased standalone Zen5 microcode patches.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250410114222.32523-1-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a94fd938df upstream.
In certain scenarios, for example, during fuzz testing, the source
name may be NULL, which could lead to a kernel panic. Therefore, an
extra check for the source name should be added.
Fixes: a62a8ef9d9 ("virtio-fs: add virtiofs filesystem")
Cc: <stable@vger.kernel.org> # all LTS kernels
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Link: https://lore.kernel.org/20250407115111.25535-1-xiangsheng.hou@mediatek.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8c5b0ed89 upstream.
The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.
Running the following commands:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
Would produce nothing, but with the fix it will produce something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Reported-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d94c12bd97 upstream.
The call to read_word_at_a_time() in sized_strscpy() is problematic
with MTE because it may trigger a tag check fault when reading
across a tag granule (16 bytes) boundary. To make this code
MTE compatible, let's start using load_unaligned_zeropad()
on architectures where it is available (i.e. architectures that
define CONFIG_DCACHE_WORD_ACCESS). Because load_unaligned_zeropad()
takes care of page boundaries as well as tag granule boundaries,
also disable the code preventing crossing page boundaries when using
load_unaligned_zeropad().
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If4b22e43b5a4ca49726b4bf98ada827fdf755548
Fixes: 94ab5b61ee ("kasan, arm64: enable CONFIG_KASAN_HW_TAGS")
Cc: stable@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250403000703.2584581-2-pcc@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 262b73ef44 upstream.
The following Python script results in unexpected behaviour when run on
a CIFS filesystem against a Windows Server:
# Create file
fd = os.open('test', os.O_WRONLY|os.O_CREAT)
os.write(fd, b'foo')
os.close(fd)
# Open and close the file to leave a pending deferred close
fd = os.open('test', os.O_RDONLY|os.O_DIRECT)
os.close(fd)
# Try to open the file via a hard link
os.link('test', 'new')
newfd = os.open('new', os.O_RDONLY|os.O_DIRECT)
The final open returns EINVAL due to the server returning
STATUS_INVALID_PARAMETER. The root cause of this is that the client
caches lease keys per inode, but the spec requires them to be related to
the filename which causes problems when hard links are involved:
From MS-SMB2 section 3.3.5.9.11:
"The server MUST attempt to locate a Lease by performing a lookup in the
LeaseTable.LeaseList using the LeaseKey in the
SMB2_CREATE_REQUEST_LEASE_V2 as the lookup key. If a lease is found,
Lease.FileDeleteOnClose is FALSE, and Lease.Filename does not match the
file name for the incoming request, the request MUST be failed with
STATUS_INVALID_PARAMETER"
On client side, we first check the context of file open, if it hits above
conditions, we first close all opening files which are belong to the same
inode, then we do open the hard link file.
Cc: stable@vger.kernel.org
Signed-off-by: Chunjie Zhu <chunjie.zhu@cloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c02223e2d upstream.
Currently if the filesystem for the cgroups version it wants to use is not
mounted charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh tests
will attempt to mount it on the hard coded path /dev/cgroup/memory,
deleting that directory when the test finishes. This will fail if there
is not a preexisting directory at that path, and since the directory is
deleted subsequent runs of the test will fail. Instead of relying on this
hard coded directory name use mktemp to generate a temporary directory to
use as a mountpoint, fixing both the assumption and the disruption caused
by deleting a preexisting directory.
This means that if the relevant cgroup filesystem is not already mounted
then we rely on having coreutils (which provides mktemp) installed. I
suspect that many current users are relying on having things automounted
by default, and given that the script relies on bash it's probably not an
unreasonable requirement.
Link: https://lkml.kernel.org/r/20250404-kselftest-mm-cgroup2-detection-v1-1-3dba6d32ba8c@kernel.org
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit adf53771a3 upstream.
When building with CONFIG_FORTIFY_SOURCE=y and W=1, there is a warning
because of the memcpy() in syscall_get_arguments():
In file included from include/linux/string.h:392,
from include/linux/bitmap.h:13,
from include/linux/cpumask.h:12,
from arch/riscv/include/asm/processor.h:55,
from include/linux/sched.h:13,
from kernel/ptrace.c:13:
In function 'fortify_memcpy_chk',
inlined from 'syscall_get_arguments.isra' at arch/riscv/include/asm/syscall.h:66:2:
include/linux/fortify-string.h:580:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
580 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The fortified memcpy() routine enforces that the source is not overread
and the destination is not overwritten if the size of either field and
the size of the copy are known at compile time. The memcpy() in
syscall_get_arguments() intentionally overreads from a1 to a5 in
'struct pt_regs' but this is bigger than the size of a1.
Normally, this could be solved by wrapping a1 through a5 with
struct_group() but there was already a struct_group() applied to these
members in commit bba547810c ("riscv: tracing: Fix
__write_overflow_field in ftrace_partial_regs()").
Just avoid memcpy() altogether and write the copying of args from regs
manually, which clears up the warning at the expense of three extra
lines of code.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry V. Levin <ldv@strace.io>
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250409-riscv-avoid-fortify-warning-syscall_get_arguments-v1-1-7853436d4755@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95d2b9f693 upstream.
This reverts commit e9f2517a3e.
Commit e9f2517a3e ("smb: client: fix TCP timers deadlock after
rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is
mentioned as CVE-2024-54680, but is actually did not fix anything;
The issue can be reproduced on top of it. [0]
Also, it reverted the change by commit ef7134c7fc ("smb: client:
Fix use-after-free of network namespace.") and introduced a real
issue by reviving the kernel TCP socket.
When a reconnect happens for a CIFS connection, the socket state
transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync()
in tcp_close() stops all timers for the socket.
If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1
forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans.
Usually, FIN can be retransmitted by the peer, but if the peer aborts
the connection, the issue comes into reality.
I warned about this privately by pointing out the exact report [1],
but the bogus fix was finally merged.
So, we should not stop the timers to finally kill the connection on
our side in that case, meaning we must not use a kernel socket for
TCP whose sk->sk_net_refcnt is 0.
The kernel socket does not have a reference to its netns to make it
possible to tear down netns without cleaning up every resource in it.
For example, tunnel devices use a UDP socket internally, but we can
destroy netns without removing such devices and let it complete
during exit. Otherwise, netns would be leaked when the last application
died.
However, this is problematic for TCP sockets because TCP has timers to
close the connection gracefully even after the socket is close()d. The
lifetime of the socket and its netns is different from the lifetime of
the underlying connection.
If the socket user does not maintain the netns lifetime, the timer could
be fired after the socket is close()d and its netns is freed up, resulting
in use-after-free.
Actually, we have seen so many similar issues and converted such sockets
to have a reference to netns.
That's why I converted the CIFS client socket to have a reference to
netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope
of CIFS and technically wrong in e9f2517a3e, but **is in-scope and right
fix**.
Regarding the LOCKDEP issue, we can prevent the module unload by
bumping the module refcount when switching the LOCKDDEP key in
sock_lock_init_class_and_name(). [2]
For a while, let's revert the bogus fix.
Note that now we can use sk_net_refcnt_upgrade() for the socket
conversion, but I'll do so later separately to make backport easy.
Link: https://lore.kernel.org/all/20250402020807.28583-1-kuniyu@amazon.com/ #[0]
Link: https://lore.kernel.org/netdev/c08bd5378da647a2a4c16698125d180a@huawei.com/ #[1]
Link: https://lore.kernel.org/lkml/20250402005841.19846-1-kuniyu@amazon.com/ #[2]
Fixes: e9f2517a3e ("smb: client: fix TCP timers deadlock after rmmod")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c707193a17 upstream.
This reverts commit 4e7f1644f2.
The commit e9f2517a3e ("smb: client: fix TCP timers deadlock after
rmmod") is not only a bogus fix for LOCKDEP null-ptr-deref but also
introduces a real issue, TCP sockets leak, which will be explained in
detail in the next revert.
Also, CNA assigned CVE-2024-54680 to it but is rejecting it. [0]
Thus, we are reverting the commit and its follow-up commit 4e7f1644f2
("smb: client: Fix netns refcount imbalance causing leaks and
use-after-free").
Link: https://lore.kernel.org/all/2025040248-tummy-smilingly-4240@gregkh/ #[0]
Fixes: 4e7f1644f2 ("smb: client: Fix netns refcount imbalance causing leaks and use-after-free")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a93ff74282 upstream.
The user can set any value for 'deadtime'. This affects the arithmetic
expression 'req->deadtime * SMB_ECHO_INTERVAL', which is subject to
overflow. The added check makes the server behavior more predictable.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18b4fac5ef upstream.
There is a room in smb_break_all_levII_oplock that can cause racy issues
when unlocking in the middle of the loop. This patch use read lock
to protect whole loop.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e440d5b25 upstream.
krb_authenticate frees sess->user and does not set the pointer
to NULL. It calls ksmbd_krb5_authenticate to reinitialise
sess->user but that function may return without doing so. If
that happens then smb2_sess_setup, which calls krb_authenticate,
will be accessing free'd memory when it later uses sess->user.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb3a04a851 upstream.
In theory overlayfs could support upper layer directly referring to a data
layer, but there's no current use case for this.
Originally, when data-only layers were introduced, this wasn't allowed,
only introduced by the "datadir+" feature, but without actually handling
this case, resulting in an Oops.
Fix by disallowing datadir without lowerdir.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 24e16e385f ("ovl: add support for appending lowerdirs one by one")
Cc: <stable@vger.kernel.org> # v6.7
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a995199384 upstream.
In the case of apply_to_existing_page_range(), apply_to_pte_range() is
reached with 'create' set to false. When !create, the loop over the PTE
page table is broken.
apply_to_pte_range() will only move to the next PTE entry if 'create' is
true or if the current entry is not pte_none().
This means that the user of apply_to_existing_page_range() will not have
'fn' called for any entries after the first pte_none() in the PTE page
table.
Fix the loop logic in apply_to_pte_range().
There are no known runtime issues from this, but the fix is trivial enough
for stable@ even without a known buggy user.
Link: https://lkml.kernel.org/r/20250409094043.1629234-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: be1db4753e ("mm/memory.c: add apply_to_existing_page_range() helper")
Cc: Daniel Axtens <dja@axtens.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ab1b16023 upstream.
filemap_get_folios_contig() is supposed to return distinct folios found
within [start, end]. Large folios in the Xarray become multi-index
entries. xas_next() can iterate through the sub-indexes before finding a
sibling entry and breaking out of the loop.
This can result in a returned folio_batch containing an indeterminate
number of duplicate folios, which forces the callers to skeptically handle
the returned batch. This is inefficient and incurs a large maintenance
overhead.
We can fix this by calling xas_advance() after we have successfully adding
a folio to the batch to ensure our Xarray is positioned such that it will
correctly find the next folio - similar to filemap_get_read_batch().
Link: https://lkml.kernel.org/r/Z-8s1-kiIDkzgRbc@fedora
Fixes: 35b471467f ("filemap: add filemap_get_folios_contig()")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reported-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Closes: https://lkml.kernel.org/r/b714e4de-2583-4035-b829-72cfb5eb6fc6@gmx.com
Tested-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c03ebd7cd upstream.
Not like fault_in_readable() or fault_in_writeable(), in
fault_in_safe_writeable() local variable 'start' is increased page by page
to loop till the whole address range is handled. However, it mistakenly
calculates the size of the handled range with 'uaddr - start'.
Fix it here.
Andreas said:
: In gfs2, fault_in_iov_iter_writeable() is used in
: gfs2_file_direct_read() and gfs2_file_read_iter(), so this potentially
: affects buffered as well as direct reads. This bug could cause those
: gfs2 functions to spin in a loop.
Link: https://lkml.kernel.org/r/20250410035717.473207-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20250410035717.473207-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Fixes: fe673d3f5b ("mm: gup: make fault_in_safe_writeable() use fixup_user_fault()")
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Yanjun.Zhu <yanjun.zhu@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a84edd52f0 upstream.
The compaction code doesn't take references on pages until we're certain
we should attempt to handle it.
In the hugetlb case, isolate_or_dissolve_huge_page() may return -EBUSY
without taking a reference to the folio associated with our pfn. If our
folio's refcount drops to 0, compound_nr() becomes unpredictable, making
low_pfn and nr_scanned unreliable. The user-visible effect is minimal -
this should rarely happen (if ever).
Fix this by storing the folio statistics earlier on the stack (just like
the THP and Buddy cases).
Also revert commit 66fe1cf7f5 ("mm: compaction: use helper compound_nr
in isolate_migratepages_block") to make backporting easier.
Link: https://lkml.kernel.org/r/20250401021025.637333-1-vishal.moola@gmail.com
Fixes: 369fa227c2 ("mm: make alloc_contig_range handle free hugetlb pages")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0dba7a05b9 upstream.
Remove the suppression of the uevents before scanning for partitions.
The partitions inherit their suppression settings from their parent device,
which lead to the uevents being dropped.
This is similar to the same changes for LOOP_CONFIGURE done in
commit bb430b6942 ("loop: LOOP_CONFIGURE: send uevents for partitions").
Fixes: 498ef5c777 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v3-1-60ff69ac6088@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7bc0010ce upstream.
The original commit message and the wording "uncork" in the code comment
indicate that it is expected that the suppressed event instances are
automatically sent after unsuppressing.
This is not the case, instead they are discarded.
In effect this means that no "changed" events are emitted on the device
itself by default.
While each discovered partition does trigger a changed event on the
device, devices without partitions don't have any event emitted.
This makes udev miss the device creation and prompted workarounds in
userspace. See the linked util-linux/losetup bug.
Explicitly emit the events and drop the confusingly worded comments.
Link: https://github.com/util-linux/util-linux/issues/2434
Fixes: 498ef5c777 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v2-1-0c4e6a923b2a@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0405d4b63d upstream.
syzbot reported a slab-out-of-bounds Read in isofs_fh_to_parent. [1]
The handle_bytes value passed in by the reproducing program is equal to 12.
In handle_to_path(), only 12 bytes of memory are allocated for the structure
file_handle->f_handle member, which causes an out-of-bounds access when
accessing the member parent_block of the structure isofs_fid in isofs,
because accessing parent_block requires at least 16 bytes of f_handle.
Here, fh_len is used to indirectly confirm that the value of handle_bytes
is greater than 3 before accessing parent_block.
[1]
BUG: KASAN: slab-out-of-bounds in isofs_fh_to_parent+0x1b8/0x210 fs/isofs/export.c:183
Read of size 4 at addr ffff0000cc030d94 by task syz-executor215/6466
CPU: 1 UID: 0 PID: 6466 Comm: syz-executor215 Not tainted 6.14.0-rc7-syzkaller-ga2392f333575 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xe4/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0x198/0x550 mm/kasan/report.c:521
kasan_report+0xd8/0x138 mm/kasan/report.c:634
__asan_report_load4_noabort+0x20/0x2c mm/kasan/report_generic.c:380
isofs_fh_to_parent+0x1b8/0x210 fs/isofs/export.c:183
exportfs_decode_fh_raw+0x2dc/0x608 fs/exportfs/expfs.c:523
do_handle_to_path+0xa0/0x198 fs/fhandle.c:257
handle_to_path fs/fhandle.c:385 [inline]
do_handle_open+0x8cc/0xb8c fs/fhandle.c:403
__do_sys_open_by_handle_at fs/fhandle.c:443 [inline]
__se_sys_open_by_handle_at fs/fhandle.c:434 [inline]
__arm64_sys_open_by_handle_at+0x80/0x94 fs/fhandle.c:434
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Allocated by task 6466:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x40/0x50 mm/kasan/generic.c:562
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xac/0xc4 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4294 [inline]
__kmalloc_noprof+0x32c/0x54c mm/slub.c:4306
kmalloc_noprof include/linux/slab.h:905 [inline]
handle_to_path fs/fhandle.c:357 [inline]
do_handle_open+0x5a4/0xb8c fs/fhandle.c:403
__do_sys_open_by_handle_at fs/fhandle.c:443 [inline]
__se_sys_open_by_handle_at fs/fhandle.c:434 [inline]
__arm64_sys_open_by_handle_at+0x80/0x94 fs/fhandle.c:434
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Reported-by: syzbot+4d7cd7dd0ce1aa8d5c65@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4d7cd7dd0ce1aa8d5c65
Tested-by: syzbot+4d7cd7dd0ce1aa8d5c65@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/tencent_9C8CB8A7E7C6C512C7065DC98B6EDF6EC606@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7b39df7e7 upstream.
Ensure refcount is raised before request is enqueued since it could
be dequeued before the call returns.
Reported-by: Sean Anderson <sean.anderson@linux.dev>
Cc: <stable@vger.kernel.org>
Fixes: 11144416a7 ("crypto: caam/qi - optimize frame queue cleanup")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79443a7e9d upstream.
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb7 ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc08c58696 upstream.
Currently, displaying the btrfs subvol mount option doesn't escape ','.
This makes parsing /proc/self/mounts and /proc/self/mountinfo
ambiguous for subvolume names that contain commas. The text after the
comma could be mistaken for another option (think "subvol=foo,ro", where
ro is actually part of the subvolumes name).
Replace the manual escape characters list with a call to
seq_show_option(). Thanks to Calvin Walton for suggesting this approach.
Fixes: c8d3fe028f ("Btrfs: show subvol= and subvolid= in /proc/mounts")
CC: stable@vger.kernel.org # 5.4+
Suggested-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Johannes Kimmel <kernel@bareminimum.eu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 875db86e1e upstream.
Avoid double-copying of string literals. Use a "const char *" for each
string instead of copying from .rodata into stack and then into the skb.
We can go directly from .rodata to the skb.
This also works around a Clang bug (that has since been fixed[1]).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401250927.1poZERd6-lkp@intel.com/
Fixes: ab4e4380d4 ("Bluetooth: Add vhci devcoredump support")
Link: ea2e66aa8b [1]
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2e49e2141 upstream.
This is required for passing PTS test cases:
- L2CAP/COS/CED/BI-14-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Connection Request
- L2CAP/COS/CED/BI-15-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Disconnection Request
The test procedure defined in L2CAP.TS.p39 for both tests is:
1. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 8 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains one L2CAP_ECHO_REQ
packet with Data Length set to 0 with 0 octets of echo data and
one command packet and Data Length set as specified in Table 4.6
and the correct command data.
2. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
3. Perform alternative 3A, 3B, 3C, or 3D depending on the IUT’s
response.
Alternative 3A (IUT terminates the link):
3A.1 The IUT terminates the link.
3A.2 The test ends with a Pass verdict.
Alternative 3B (IUT discards the frame):
3B.1 The IUT does not send a reply to the Lower Tester.
Alternative 3C (IUT rejects PDU):
3C.1 The IUT sends an L2CAP_COMMAND_REJECT_RSP PDU to the
Lower Tester.
Alternative 3D (Any other IUT response):
3D.1 The Upper Tester issues a warning and the test ends.
4. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 4 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains Data Length set to
0 with an L2CAP_ECHO_REQ packet with 0 octets of echo data.
5. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
With expected outcome:
In Steps 2 and 5, the IUT responds with an L2CAP_ECHO_RSP.
In Step 3A.1, the IUT terminates the link.
In Step 3B.1, the IUT does not send a reply to the Lower Tester.
In Step 3C.1, the IUT rejects the PDU.
In Step 3D.1, the IUT sends any valid response.
Currently PTS fails with the following logs:
Failed to receive ECHO RESPONSE.
And HCI logs:
> ACL Data RX: Handle 11 flags 0x02 dlen 20
L2CAP: Information Response (0x0b) ident 2 len 12
Type: Fixed channels supported (0x0003)
Result: Success (0x0000)
Channels: 0x000000000000002e
L2CAP Signaling (BR/EDR)
Connectionless reception
AMP Manager Protocol
L2CAP Signaling (LE)
> ACL Data RX: Handle 11 flags 0x02 dlen 13
frame too long
08 01 00 00 08 02 01 00 aa .........
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9d78f02503 ]
IB_SIZE is only b0..b19. Starting with a6xx gen3, additional fields
were added above the IB_SIZE. Accidentially setting them can cause
badness. Fix this by properly defining the CP_INDIRECT_BUFFER packet
and using the generated builder macro to ensure unintended bits are not
set.
v2: add missing type attribute for IB_BASE
v3: fix offset attribute in xml
Reported-by: Connor Abbott <cwabbott0@gmail.com>
Fixes: a83366ef19 ("drm/msm/a6xx: add A640/A650 to gpulist")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/643396/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92f1d3b401 ]
The maximum of the ftrace hash bits is made fls(32) in
register_ftrace_direct(), which seems illogical. So, we fix it by making
the max hash bits FTRACE_HASH_MAX_BITS instead.
Link: https://lore.kernel.org/20250413014444.36724-1-dongml2@chinatelecom.cn
Fixes: d05cb47066 ("ftrace: Fix modification of direct_function hash while in use")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75caec0c2a ]
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Fixes: a076a860ac ("media: i2c: add I2C Address Translator (ATR) support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[wsa: reworded subject]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1d14d931b ]
A deadlock warning occurred when invoking nfs4_put_stid following a failed
dl_recall queue operation:
T1 T2
nfs4_laundromat
nfs4_get_client_reaplist
nfs4_anylock_blockers
__break_lease
spin_lock // ctx->flc_lock
spin_lock // clp->cl_lock
nfs4_lockowner_has_blockers
locks_owner_has_blockers
spin_lock // flctx->flc_lock
nfsd_break_deleg_cb
nfsd_break_one_deleg
nfs4_put_stid
refcount_dec_and_lock
spin_lock // clp->cl_lock
When a file is opened, an nfs4_delegation is allocated with sc_count
initialized to 1, and the file_lease holds a reference to the delegation.
The file_lease is then associated with the file through kernel_setlease.
The disassociation is performed in nfsd4_delegreturn via the following
call chain:
nfsd4_delegreturn --> destroy_delegation --> destroy_unhashed_deleg -->
nfs4_unlock_deleg_lease --> kernel_setlease --> generic_delete_lease
The corresponding sc_count reference will be released after this
disassociation.
Since nfsd_break_one_deleg executes while holding the flc_lock, the
disassociation process becomes blocked when attempting to acquire flc_lock
in generic_delete_lease. This means:
1) sc_count in nfsd_break_one_deleg will not be decremented to 0;
2) The nfs4_put_stid called by nfsd_break_one_deleg will not attempt to
acquire cl_lock;
3) Consequently, no deadlock condition is created.
Given that sc_count in nfsd_break_one_deleg remains non-zero, we can
safely perform refcount_dec on sc_count directly. This approach
effectively avoids triggering deadlock warnings.
Fixes: 230ca75845 ("nfsd: put dl_stid if fail to queue dl_recall")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd35b6cb46 ]
nfs.ko, nfsd.ko, and lockd.ko all use crc32_le(), which is available
only when CONFIG_CRC32 is enabled. But the only NFS kconfig option that
selected CONFIG_CRC32 was CONFIG_NFS_DEBUG, which is client-specific and
did not actually guard the use of crc32_le() even on the client.
The code worked around this bug by only actually calling crc32_le() when
CONFIG_CRC32 is built-in, instead hard-coding '0' in other cases. This
avoided randconfig build errors, and in real kernels the fallback code
was unlikely to be reached since CONFIG_CRC32 is 'default y'. But, this
really needs to just be done properly, especially now that I'm planning
to update CONFIG_CRC32 to not be 'default y'.
Therefore, make CONFIG_NFS_FS, CONFIG_NFSD, and CONFIG_LOCKD select
CONFIG_CRC32. Then remove the fallback code that becomes unnecessary,
as well as the selection of CONFIG_CRC32 from CONFIG_NFS_DEBUG.
Fixes: 1264a2f053 ("NFS: refactor code for calculating the crc32 hash of a filehandle")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
