[ Upstream commit b5af45302e ]
Add support for TI K3 AM62D2 SoC to read speed and revision values
from hardware and pass to OPP layer. AM62D shares the same configuations
as AM62A so use existing am62a7_soc_data.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b65e630a55 ]
Add timeout handling to wait_for_completion calls in memstick_set_rw_addr()
and memstick_alloc_card() to prevent indefinite blocking in case of
hardware or communication failures.
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Link: https://lore.kernel.org/r/20250804024825.1565078-1-lijiayi@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c174e4dac ]
Wrong actual clock reported, if the SD clock division ratio is other
than 1:1(bits DIV[7:0] in SD_CLK_CTRL are set to 11111111).
On high speed mode, cat /sys/kernel/debug/mmc1/ios
Without the patch:
clock: 50000000 Hz
actual clock: 200000000 Hz
After the fix:
clock: 50000000 Hz
actual clock: 50000000 Hz
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250629203859.170850-1-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236152dd9b ]
In the pin_config_set function, when handling PIN_CONFIG_BIAS_PULL_DOWN or
PIN_CONFIG_BIAS_PULL_UP, the function calls pcs_pinconf_clear_bias()
which writes the register. However, the subsequent operations continue
using the stale 'data' value from before the register write, effectively
causing the bias clear operation to be overwritten and not take effect.
Fix this by reading the 'data' value from the register after calling
pcs_pinconf_clear_bias().
This bug seems to have existed when this code was first merged in commit
9dddb4df90 ("pinctrl: single: support generic pinconf").
Signed-off-by: Chi Zhang <chizhang@asrmicro.com>
Link: https://lore.kernel.org/20250807062038.13610-1-chizhang@asrmicro.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f755ba95a ]
Per the SD Host Controller Simplified Specification v4.20 §3.2.3, change
the SD card clock parameters only after first disabling the external card
clock. Doing this fixes a spurious clock pulse on Baytrail and Apollo Lake
SD controllers which otherwise breaks voltage switching with a specific
Swissbit SD card. This change is limited to Intel host controllers to
avoid an issue reported on ARM64 devices.
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250724185354.815888-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2caa6b88e0 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250811-restricted-pointers-bpf-v1-1-a1d7cc3cb9e7@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5039648f8 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250811-restricted-pointers-soc-v2-1-7af7ed993546@linutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c45f95222 ]
During raw read, neither the status of the ECC correction nor the erased
state of the codeword gets checked by the qcom_spi_read_cw_raw() function,
so in case of raw access reading the corresponding registers via DMA is
superfluous.
Extend the qcom_spi_config_cw_read() function to evaluate the existing
(but actually unused) 'use_ecc' parameter, and configure reading only
the flash status register when ECC is not used.
With the change, the code gets in line with the corresponding part of
the config_nand_cw_read() function in the qcom_nandc driver.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250808-qpic-snand-handle-use_ecc-v1-1-67289fbb5e2f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b832b19318 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250811-restricted-pointers-spi-v1-1-32c47f954e4d@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19e7aa0e9e ]
Add a missing le32_to_cpu when accessing num_entries, which is always a
little endian integer.
Fixes booting on Xiaomi Mi 9T (xiaomi-davinci) in big endian.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250726235646.254730-1-adrian@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 121fcf3c87 ]
When qcom_scm_assign_mem() fails, the error value is currently being
overwritten after it is logged, resulting in the loss of the original
error code. Fix this by retaining and returning the original error value
as intended.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807124451.2623019-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c30dcfd4b5 ]
Extend the ASPEED SoC info driver to support AST27XX silicon IDs.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://patch.msgid.link/20250807005208.3517283-1-ryan_chen@aspeedtech.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cfd6f1a7b4 upstream.
A race condition occurs when ffs_func_eps_enable() runs concurrently
with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset()
sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading
to a NULL pointer dereference when accessing epfile->ep in
ffs_func_eps_enable() after successful usb_ep_enable().
The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and
ffs_data_close() functions, and its modification is protected by the
spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function
is also protected by ffs->eps_lock.
Thus, add NULL pointer handling for ffs->epfiles in the
ffs_func_eps_enable() function to fix issues
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Link: https://lore.kernel.org/r/20250915092907.17802-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 309e65d151 upstream.
Commit 9e36775c22 ("mfd: kempld: Remove custom DMI matching code")
removes the ability to load the driver if no matching system DMI data
is found. Before this commit the driver could be loaded using
alternative methods such as ACPI or `force_device_id` in the absence
of a matching system DMI entry.
Restore this ability while keeping the refactored
`platform_device_info` table.
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/7d2c7e92253d851194a781720051536cca2722b8.camel@secunet.com
Signed-off-by: Lee Jones <lee@kernel.org>
Cc: Michael Brunner <Michael.Brunner@jumptec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 35e4a69b20 ]
Allow pm_restrict_gfp_mask() to be called many times in a row to avoid
issues with calling dpm_suspend_start() when the GFP mask has been
already restricted.
Only the first invocation of pm_restrict_gfp_mask() will actually
restrict the GFP mask and the subsequent calls will warn if there is
a mismatch between the expected allowed GFP mask and the actual one.
Moreover, if pm_restrict_gfp_mask() is called many times in a row,
pm_restore_gfp_mask() needs to be called matching number of times in
a row to actually restore the GFP mask. Calling it when the GFP mask
has not been restricted will cause it to warn.
This is necessary for the GFP mask restriction starting in
hibernation_snapshot() to continue throughout the entire hibernation
flow until it completes or it is aborted (either by a wakeup event or
by an error).
Fixes: 449c9c0253 ("PM: hibernate: Restrict GFP mask in hibernation_snapshot()")
Fixes: 469d80a371 ("PM: hibernate: Fix hybrid-sleep")
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/linux-pm/20251025050812.421905-1-safinaskar@gmail.com/
Link: https://lore.kernel.org/linux-pm/20251028111730.2261404-1-safinaskar@gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/5935682.DvuYhMxLoT@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f5bcfe91f ]
To avoid code duplication and improve clarity, combine the code
paths in power_down() leading to a return from that function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/3571055.QJadu78ljV@rafael.j.wysocki
[ rjw: Changed the new label name to "exit" ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 35e4a69b20 ("PM: sleep: Allow pm_restrict_gfp_mask() stacking")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db86f55bf8 ]
A throughput regression of 11% introduced by commit 779b1a1cb1 ("cpuidle:
governors: menu: Avoid selecting states with too much latency") has been
reported and it is related to the case when the menu governor checks if
selecting a proper idle state instead of a polling one makes sense.
In particular, it is questionable to do so if the exit latency of the
idle state in question exceeds the predicted idle duration, so add a
check for that, which is sufficient to make the reported regression go
away, and update the related code comment accordingly.
Fixes: 779b1a1cb1 ("cpuidle: governors: menu: Avoid selecting states with too much latency")
Closes: https://lore.kernel.org/linux-pm/004501dc43c9$ec8aa930$c59ffb90$@telus.net/
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/12786727.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17224c1d25 ]
Reduce the indentation level in the main loop of menu_select() by
rearranging some checks and assignments in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2389215.ElGaqSPkdT@rafael.j.wysocki
Stable-dep-of: db86f55bf8 ("cpuidle: governors: menu: Select polling state in some more cases")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8e04ce45a8 ]
If a MSG_PEEK | MSG_WAITALL read operation consumes all the bytes in the
receive queue and recvmsg() need to waits for more data - i.e. it's a
blocking one - upon arrival of the next packet the MPTCP protocol will
start again copying the oldest data present in the receive queue,
corrupting the data stream.
Address the issue explicitly tracking the peeked sequence number,
restarting from the last peeked byte.
Fixes: ca4fb89257 ("mptcp: add MSG_PEEK support")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-2-38ffff5a9ec8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9aa59323f2 ]
Usage of the skb deferral API is straight-forward; with multiple
subflows actives this allow moving part of the received application
load into multiple CPUs.
Also fix a typo in the related comment.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-1-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8e04ce45a8 ("mptcp: fix MSG_PEEK stream corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d08c3b173 upstream.
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE or
Gnome.
This add another quirk to worksaround to skip VSC that is incompatible
with an eDP panel.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4452
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99441824be)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 382bd6a792 upstream.
Before commit 33056a97ae ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
checked the low-power debug flag before calling
dpp3_power_on_blnd_lut(false).
After commit 33056a97ae ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
unconditionally calls dpp3_power_on_blnd_lut(false). The BLNDGAM power
helper writes BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled, causing
immediate SRAM power toggles instead of deferring at vupdate. This can
disrupt atomic color/LUT sequencing during transitions between
direct scanout and composition within gamescope's DRM backend on
Steam Deck OLED.
To fix this, leave the BLNDGAM power state unchanged when low-power is
disabled, matching dpp3_power_on_hdr3dlut and dpp3_power_on_shaper.
Fixes: 33056a97ae ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 13ff4f63fc)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3656b355b upstream.
[Why&How]
Return -EINVAL when userspace asks us to enable vblank on a crtc that is
not yet enabled.
Suggested-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1856
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cb57b8cdb0)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba10f8d92a upstream.
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ac635367e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9fb41b5de upstream.
Preserve the I/O register bits in __ast_write8_i_masked() as specified
by preserve_mask. Accidentally OR-ing the output value into these will
overwrite the register's previous settings.
Fixes display output on the AST2300, where the screen can go blank at
boot. The driver's original commit 312fec1405 ("drm: Initial KMS
driver for AST (ASpeed Technologies) 2000 series (v2)") already added
the broken code. Commit 6f719373b9 ("drm/ast: Blank with VGACR17 sync
enable, always clear VGACRB6 sync off") triggered the bug.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Closes: https://lore.kernel.org/dri-devel/a40caf8e-58ad-4f9c-af7f-54f6f69c29bb@googlemail.com/
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 6f719373b9 ("drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off")
Fixes: 312fec1405 ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Nick Bowler <nbowler@draconx.ca>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://patch.msgid.link/20251024073626.129032-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc8aa0cb87 upstream.
On ADL-S the main DMC HRR event DMC_EVT_CTL/HTP are never
restored to their previous values during DC6 exit. This
angers assert_dmc_loaded(), and basically makes the HRR
handler unusable because we don't rewrite EVT_HTP when
enabling DMC events.
Let's just clear the HRR EVT_CTL/HTP to zero from the
beginnning so that the expected value matches the post-DC6
reality.
I suppose if we ever had actual use for HRR we'd have to both,
reject HRR+PSR, and reprogram EVT_HTP when enabling the event.
But for now we don't care about HRR so keeping both registers
zeroed is fine.
Cc: stable@vger.kernel.org
Tested-by: Petr Vorel <pvorel@suse.cz>
Fixes: 43175c92d4 ("drm/i915/dmc: Assert DMC is loaded harder")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15153
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-2-ville.syrjala@linux.intel.com
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 4df3b340ff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 926d002e6d upstream.
A recent change fixed device reference leaks when looking up drm
platform device driver data during bind() but failed to remove a partial
fix which had been added by commit 80805b62ea ("drm/mediatek: Fix
kobject put for component sub-drivers").
This results in a reference imbalance on component bind() failures and
on unbind() which could lead to a user-after-free.
Make sure to only drop the references after retrieving the driver data
by effectively reverting the previous partial fix.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 1f403699c4 ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv")
Reported-by: Sjoerd Simons <sjoerd@collabora.com>
Closes: https://lore.kernel.org/r/20251003-mtk-drm-refcount-v1-1-3b3f2813b0db@collabora.com
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251006093937.27869-1-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0023c8a74 upstream.
nouveau_sched_fini() uses a memory barrier before wait_event().
wait_event(), however, is a macro which expands to a loop which might
check the passed condition several times. The barrier would only take
effect for the first check.
Replace the barrier with a function which takes the spinlock.
Cc: stable@vger.kernel.org # v6.8+
Fixes: 5f03a507b2 ("drm/nouveau: implement 1:1 scheduler - entity relationship")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251024161221.196155-2-phasta@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d25e3a610b upstream.
In a past bug fix it was forgotten that entity access must be protected
by the entity lock. That's a data race and potentially UB.
Move the spin_unlock() to the appropriate position.
Cc: stable@vger.kernel.org # v5.13+
Fixes: ac4eb83ab2 ("drm/sched: select new rq even if there is only one v3")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251022063402.87318-2-phasta@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e8b3201c7 upstream.
The DRM scheduler tracks who last uses an entity and when that process
is killed blocks all further submissions to that entity.
The problem is that we didn't track who initially created an entity, so
when a process accidently leaked its file descriptor to a child and
that child got killed, we killed the parent's entities.
Avoid that and instead initialize the entities last user on entity
creation. This also allows to drop the extra NULL check.
Signed-off-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4568
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Acked-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20251015140128.1470-1-christian.koenig@amd.com
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251015140128.1470-1-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14e02ed387 upstream.
The plane state in __drm_gem_reset_shadow_plane() can be NULL. Do not
deref that pointer, but forward NULL to the other plane-reset helpers.
Clears plane->state to NULL.
v2:
- fix typo in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b715650220 ("drm/gem: Export implementation of shadow-plane helpers")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aPIDAsHIUHp_qSW4@stanley.mountain/
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20251017091407.58488-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3fbda1a63 upstream.
Waking the device during a GT reset can lead to unintended memory
allocation, which is not allowed since GT resets occur in the reclaim
path. Prevent this by holding a PM reference while a reset is in flight.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251022005538.828980-3-matthew.brost@intel.com
(cherry picked from commit 480b358e7d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07ad45e06b upstream.
The function has a memory leak when kvrealloc() fails.
The function directly assigns NULL to the markers pointer, losing the
reference to the previously allocated memory. This causes kvfree() in
pt_dump_init() to free NULL instead of the leaked memory.
Fix by:
1. Using kvrealloc() uniformly for all allocations
2. Using a temporary variable to preserve the original pointer until
allocation succeeds
3. Removing the error path that sets markers_cnt=0 to keep
consistency between markers and markers_cnt
Found via static analysis and this is similar to commit 42378a9ca5
("bpf, verifier: Fix memory leak in array reallocation for stack state")
Fixes: d0e7915d2a ("s390/mm/ptdump: Generate address marker array dynamically")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64e2f60f35 upstream.
As reported by Luiz Capitulino enabling HVO on s390 leads to reproducible
crashes. The problem is that kernel page tables are modified without
flushing corresponding TLB entries.
Even if it looks like the empty flush_tlb_all() implementation on s390 is
the problem, it is actually a different problem: on s390 it is not allowed
to replace an active/valid page table entry with another valid page table
entry without the detour over an invalid entry. A direct replacement may
lead to random crashes and/or data corruption.
In order to invalidate an entry special instructions have to be used
(e.g. ipte or idte). Alternatively there are also special instructions
available which allow to replace a valid entry with a different valid
entry (e.g. crdte or cspg).
Given that the HVO code currently does not provide the hooks to allow for
an implementation which is compliant with the s390 architecture
requirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which is
basically a revert of the original patch which enabled it.
Reported-by: Luiz Capitulino <luizcap@redhat.com>
Closes: https://lore.kernel.org/all/20251028153930.37107-1-luizcap@redhat.com/
Fixes: 00a34d5a99 ("s390: select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP")
Cc: stable@vger.kernel.org
Tested-by: Luiz Capitulino <luizcap@redhat.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fd20f65df upstream.
Do not block PCI config accesses through pci_cfg_access_lock() when
executing the s390 variant of PCI error recovery: Acquire just
device_lock() instead of pci_dev_lock() as powerpc's EEH and
generig PCI AER processing do.
During error recovery testing a pair of tasks was reported to be hung:
mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working
INFO: task kmcheck:72 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<000000065256f572>] schedule_preempt_disabled+0x22/0x30
[<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8
[<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core]
[<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core]
[<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398
[<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0
INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000
Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<0000000652172e28>] pci_wait_cfg+0x80/0xe8
[<0000000652172f94>] pci_cfg_access_lock+0x74/0x88
[<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core]
[<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core]
[<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core]
[<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168
[<0000000652513212>] devlink_health_report+0x19a/0x230
[<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]
No kernel log of the exact same error with an upstream kernel is
available - but the very same deadlock situation can be constructed there,
too:
- task: kmcheck
mlx5_unload_one() tries to acquire devlink lock while the PCI error
recovery code has set pdev->block_cfg_access by way of
pci_cfg_access_lock()
- task: kworker
mlx5_crdump_collect() tries to set block_cfg_access through
pci_cfg_access_lock() while devlink_health_report() had acquired
the devlink lock.
A similar deadlock situation can be reproduced by requesting a
crdump with
> devlink health dump show pci/<BDF> reporter fw_fatal
while PCI error recovery is executed on the same <BDF> physical function
by mlx5_core's pci_error_handlers. On s390 this can be injected with
> zpcictl --reset-fw <BDF>
Tests with this patch failed to reproduce that second deadlock situation,
the devlink command is rejected with "kernel answers: Permission denied" -
and we get a kernel log message of:
mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5
because the config read of VSC_SEMAPHORE is rejected by the underlying
hardware.
Two prior attempts to address this issue have been discussed and
ultimately rejected [see link], with the primary argument that s390's
implementation of PCI error recovery is imposing restrictions that
neither powerpc's EEH nor PCI AER handling need. Tests show that PCI
error recovery on s390 is running to completion even without blocking
access to PCI config space.
Link: https://lore.kernel.org/all/20251007144826.2825134-1-gbayer@linux.ibm.com/
Cc: stable@vger.kernel.org
Fixes: 4cdf2f4e24 ("s390/pci: implement minimal PCI error recovery")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48cbf50531 upstream.
Per commit 9442490a02 ("regmap: irq: Support wake IRQ mask inversion")
the wake_invert flag is to support enable register, so cleared bits are
wake disabled.
Fixes: 68622bdfef ("regmap: irq: document mask/wake_invert flags")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patch.msgid.link/20251024082344.2188895-1-shawnguo2@yeah.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 434f7349a1 upstream.
Commit 4e65bda827 ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:
Unable to handle kernel paging request at virtual address ffff8000847cbad4
...
CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
Hardware name: Thundercomm Dragonboard 845c (DT)
...
Call trace:
slim_xfer_msg+0x24/0x1ac [slimbus] (P)
slim_read+0x48/0x74 [slimbus]
regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
_regmap_raw_read+0xe8/0x174
_regmap_bus_read+0x44/0x80
_regmap_read+0x60/0xd8
_regmap_update_bits+0xf4/0x140
_regmap_select_page+0xa8/0x124
_regmap_raw_write_impl+0x3b8/0x65c
_regmap_bus_raw_write+0x60/0x80
_regmap_write+0x58/0xc0
regmap_write+0x4c/0x80
wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
__soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
snd_pcm_hw_params+0x124/0x464 [snd_pcm]
snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
snd_pcm_ioctl+0x34/0x4c [snd_pcm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xf0
el0t_64_sync+0x198/0x19c
The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.
While at this, also correct the same argument in __regmap_init_slimbus().
Fixes: 4e65bda827 ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 7d6f7fb053 ("regmap: add SLIMbus support")
Cc: stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022201013.1740211-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ba6502ce1 upstream.
When running "perf mem record" command on CWF, the below KASAN
global-out-of-bounds warning is seen.
==================================================================
BUG: KASAN: global-out-of-bounds in cmt_latency_data+0x176/0x1b0
Read of size 4 at addr ffffffffb721d000 by task dtlb/9850
Call Trace:
kasan_report+0xb8/0xf0
cmt_latency_data+0x176/0x1b0
setup_arch_pebs_sample_data+0xf49/0x2560
intel_pmu_drain_arch_pebs+0x577/0xb00
handle_pmi_common+0x6c4/0xc80
The issue is caused by below code in __grt_latency_data(). The code
tries to access x86_hybrid_pmu structure which doesn't exist on
non-hybrid platform like CWF.
WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big)
So add is_hybrid() check before calling this WARN_ON_ONCE to fix the
global-out-of-bounds access issue.
Fixes: 090262439f ("perf/x86/intel: Rename model-specific pebs_latency_data functions")
Reported-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251028064214.1451968-1-dapeng1.mi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d50f210913 upstream.
Previously linker scripts would always generate vmlinuz that has sections
aligned. And thus padded (correct Authenticode calculation) and unpadded
calculation would be same. As in https://github.com/rhboot/pesign userspace
tool would produce the same authenticode digest for both of the following
commands:
pesign --padding --hash --in ./arch/x86_64/boot/bzImage
pesign --nopadding --hash --in ./arch/x86_64/boot/bzImage
The commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo section of variable length. Depending
on kernel configuration it may or may not be aligned.
All userspace signing tooling correctly pads such section to calculation
spec compliant authenticode digest.
However, if bzImage is not further processed and is attempted to be loaded
directly by EDK2 firmware, it calculates unpadded Authenticode digest and
fails to correct accept/reject such kernel builds even when propoer
Authenticode values are enrolled in db/dbx. One can say EDK2 requires
aligned/padded kernels in Secureboot.
Thus add ALIGN(8) to the .modinfo section, to esure kernels irrespective of
modinfo contents can be loaded by all existing EDK2 firmware builds.
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Cc: stable@vger.kernel.org
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@surgut.co.uk>
Link: https://patch.msgid.link/20251026202100.679989-1-dimitri.ledkov@surgut.co.uk
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 033559473d upstream.
This commit fixes the wrapper function dma_fence_timeline_name(), that
was added for safe access, to actually call the timeline name method of
dma_fence_ops.
Cc: <stable@vger.kernel.org> # v6.17+
Signed-off-by: Akash Goel <akash.goel@arm.com>
Fixes: 506aa8b02a ("dma-fence: Add safe access helpers and document the rules")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251021160951.1415603-1-akash.goel@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19de03b312 upstream.
A REQ_OP_OPEN_ZONE request changes the condition of a sequential zone of
a zoned block device to the explicitly open condition
(BLK_ZONE_COND_EXP_OPEN). As such, it should be considered a write
operation.
Change this operation code to be an odd number to reflect this. The
following operation numbers are changed to keep the numbering compact.
No problems were reported without this change as this operation has no
data. However, this unifies the zone operation to reflect that they
modify the device state and also allows strengthening checks in the
block layer, e.g. checking if this operation is not issued against a
read-only device.
Fixes: 6c1b1da58f ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12a1c9353c upstream.
REQ_OP_ZONE_RESET_ALL is a zone management request. Fix
op_is_zone_mgmt() to return true for that operation, like it already
does for REQ_OP_ZONE_RESET.
While no problems were reported without this fix, this change allows
strengthening checks in various block device drivers (scsi sd,
virtioblk, DM) where op_is_zone_mgmt() is used to verify that a zone
management command is not being issued to a regular block device.
Fixes: 6c1b1da58f ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58764259eb upstream.
Usage of the ACPI device should be phased out in the future, as
the driver itself is now using the platform bus.
Replace any usage of struct acpi_device in acpi_fan_get_fst() to
allow users to drop usage of struct acpi_device.
Also extend the integer check to all three package elements.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251007234149.2769-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8284a9e917 ]
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: d1bb646510 ("drm/amdgpu: add irq source ids for VCN5_0/JPEG5_0")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68c20d7b17)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 964f8ff276 ]
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: 523b69c654 ("drm/amd/include: Add amd cper header")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 72c5482cb0)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b37ebf2c ]
These should be MIT. The driver in general is MIT and
the license text at the top of the files is MIT so fix
it.
Fixes: 92d5d2a09d ("drm/amdgpu: Introduce funcs for populating CPER")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit abd3f87640)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 501672e3c1 ]
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92b0a6ae66)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07a13f913c ]
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18edef19ea ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c52238c9fb)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 238d468d3e ]
'table_index' is a variable defined by the smu driver (kmd)
'table_id' is a variable defined by the hw smu (pmfw)
This code should use table_index as a bounds check.
Fixes: caad2613dc ("drm/amd/powerplay: move table setting common code to smu_cmn.c")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fca0c66b22)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 745bae76ac ]
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd
should be done by devres.
However, drm_put_dev() is still in the probe error and device remove
paths. When the driver fails to probe warnings like the following are
shown because devres is trying to drm_put_dev() after the driver
already did it.
[ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22
[ 5.649605] ------------[ cut here ]------------
[ 5.649607] refcount_t: underflow; use-after-free.
[ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
Fixes: a9ed2f052c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3eb8c0b4c0)
Signed-off-by: Sasha Levin <sashal@kernel.org>
