CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So
explicitly enable it to allow easy use of systemd userspace.
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Josef reported that the uncore driver trips over with CONFIG_SMP=n because
x86_max_cores is 16 instead of 12.
The reason is, that for SMP=n the extended topology detection is a NOOP and
the cache leaf is used to determine the number of cores. That's wrong in two
aspects:
1) The cache leaf enumerates the maximum addressable number of cores in the
package, which is obviously not correct
2) UP has no business with topology bits at all.
Make intel_num_cpu_cores() return 1 for CONFIG_SMP=n
Reported-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team <Kernel-team@fb.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/761b4a2a-0332-7954-f030-c6639f949612@fb.com
An error in documentation of the NAND Flash Controller (NFC) led to choose
another compatibility string for sama5d2 with an impact on the NAND flash
ready/busy information. It was producing the error message:
atmel_nand 80000000.nand: Time out to wait for interrupt: 0x08000000
and had an impact on performance.
So, switch back to the classical "atmel,sama5d3-nfc" compatibility string for
this SoC which gives the proper ready/busy bit information. The NAND flash
driver will be updated to remove the support for this different
implementation.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Romain Izard <romain.izard.pro@gmail.com>
[nicolas.ferre@atmel.com: change commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
arch/x86/kernel/early-quirks.c: In function ‘intel_graphics_stolen’:
arch/x86/kernel/early-quirks.c:539:9: warning: format ‘%llx’ expects
argument of type ‘long long unsigned int’, but argument 2 has type ‘phys_addr_t’ [-Wformat=]
"0x%llx-0x%llx\n", base, base + size - 1);
^
arch/x86/kernel/early-quirks.c:539:9: warning: format ‘%llx’ expects
argument of type ‘long long unsigned int’, but argument 3 has type ‘phys_addr_t’ [-Wformat=]
v2: Use %pa for addresses
Fixes: ee0629cfd3 (drm/i915: Function per early graphics quirk)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v1
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462811982-1567-1-git-send-email-chris@chris-wilson.co.uk
The ARMv8.1 architecture extensions introduce support for hardware
updates of the access and dirty information in page table entries. With
VTCR_EL2.HA enabled (bit 21), when the CPU accesses an IPA with the
PTE_AF bit cleared in the stage 2 page table, instead of raising an
Access Flag fault to EL2 the CPU sets the actual page table entry bit
(10). To ensure that kernel modifications to the page table do not
inadvertently revert a bit set by hardware updates, certain Stage 2
software pte/pmd operations must be performed atomically.
The main user of the AF bit is the kvm_age_hva() mechanism. The
kvm_age_hva_handler() function performs a "test and clear young" action
on the pte/pmd. This needs to be atomic in respect of automatic hardware
updates of the AF bit. Since the AF bit is in the same position for both
Stage 1 and Stage 2, the patch reuses the existing
ptep_test_and_clear_young() functionality if
__HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG is defined. Otherwise, the
existing pte_young/pte_mkold mechanism is preserved.
The kvm_set_s2pte_readonly() (and the corresponding pmd equivalent) have
to perform atomic modifications in order to avoid a race with updates of
the AF bit. The arm64 implementation has been re-written using
exclusives.
Currently, kvm_set_s2pte_writable() (and pmd equivalent) take a pointer
argument and modify the pte/pmd in place. However, these functions are
only used on local variables rather than actual page table entries, so
it makes more sense to follow the pte_mkwrite() approach for stage 1
attributes. The change to kvm_s2pte_mkwrite() makes it clear that these
functions do not modify the actual page table entries.
The (pte|pmd)_mkyoung() uses on Stage 2 entries (setting the AF bit
explicitly) do not need to be modified since hardware updates of the
dirty status are not supported by KVM, so there is no possibility of
losing such information.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
In netdevice.h we removed the structure in net-next that is being
changes in 'net'. In macsec.c and rtnetlink.c we have overlaps
between fixes in 'net' and the u64 attribute changes in 'net-next'.
The mlx5 conflicts have to do with vxlan support dependencies.
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all drivers support the same set of functions and the same
setup code, drop every model-specific DSA switch driver and replace them
with a common mv88e6xxx driver.
This merges the info tables into one, removes the function exports, the
model-specific files, and update the defconfigs.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
compatible string if no exact match based on the IO address is found.
This leaves out the need to patch auxdata for each driver when adding
new SoCs. And it also reprotedly fixes the issue of passing auxdata
to a child if the parent instantiates the child from DT as discussed
in the "[PATCH] of/platform: Allow secondary compatible match in
of_dev_lookup" mailing list thread.
As a minimal use case, let's also convert omap pinctrl auxdatato
use a generic match.
There is no need to get this in to the v4.6-rc cycle and it can wait
for v4.7 merge window. Note that these changes have now been sitting
in Linux next for about two weeks so far as I wanted to make sure no
new issues are popping up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T39l
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.7/auxdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
Merge "non urgent auxdata fix for v4.7 merge window" from Tony Lindgren:
Device tree auxdata handling fix that allows a match based on the
compatible string if no exact match based on the IO address is found.
This leaves out the need to patch auxdata for each driver when adding
new SoCs. And it also reprotedly fixes the issue of passing auxdata
to a child if the parent instantiates the child from DT as discussed
in the "[PATCH] of/platform: Allow secondary compatible match in
of_dev_lookup" mailing list thread.
As a minimal use case, let's also convert omap pinctrl auxdatato
use a generic match.
There is no need to get this in to the v4.6-rc cycle and it can wait
for v4.7 merge window. Note that these changes have now been sitting
in Linux next for about two weeks so far as I wanted to make sure no
new issues are popping up.
* tag 'omap-for-v4.7/auxdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Simplify auxdata by using the generic match
of/platform: Allow secondary compatible match in of_dev_lookup
v4.7 merge window. These are not considered urgent fixes enough
for the v4.6-rc cycle, but we need them in v4.7 in order to drop
the last remaining board-*.c files for omap3 for v4.8 merge window.
On Nokia N900, we need to pass the MMC slot names for the legacy
user space to work. Let's do that using auxdata as the driver is
setting up things already with the pdata for legacy booting. Then
we can later on discuss if we may want to have some generic binding
describing where the MMC slots are on the device.
N900 also has had the ir-rx51 device driver unusable with multiarch
for a long time. Let's pass the dmtimer data in pdata for the driver
to get it going again. Then once things are working, we can eventually
change the driver to use just hrtimer and PWM framework. The driver
changes will be queued separately.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=klmr
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.7/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
Merge "omap legacy boot vs dt boot fixes for v4.7 merge window"
from Tony Lindgren:
Legacy booting vs device tree booting fixes for omaps for
v4.7 merge window. These are not considered urgent fixes enough
for the v4.6-rc cycle, but we need them in v4.7 in order to drop
the last remaining board-*.c files for omap3 for v4.8 merge window.
On Nokia N900, we need to pass the MMC slot names for the legacy
user space to work. Let's do that using auxdata as the driver is
setting up things already with the pdata for legacy booting. Then
we can later on discuss if we may want to have some generic binding
describing where the MMC slots are on the device.
N900 also has had the ir-rx51 device driver unusable with multiarch
for a long time. Let's pass the dmtimer data in pdata for the driver
to get it going again. Then once things are working, we can eventually
change the driver to use just hrtimer and PWM framework. The driver
changes will be queued separately.
* tag 'omap-for-v4.7/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: n900 needs MMC slot names for legacy user space
ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51
1. Fix s5p-mfc driver probe on Exynos542x Peach boards (need to provide MFC
memory banks). On these boards this was broken for long time but
apparently no one enabled this driver till now.
2. Fix creation of debugfs entries for one regulator on Exynos4210
Trats board.
3. Fix probing of max8997 MFD driver (and its children) because
of missing interrupt. Actually the current version of the driver probes
(just without interrupts) but after switching to regmap and regmap-irq,
the interrupt will be mandatory.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=l5HK
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-non-critical-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/fixes-non-critical
Merge "Samsung DTS non-critical fixes for v4.7":
1. Fix s5p-mfc driver probe on Exynos542x Peach boards (need to provide MFC
memory banks). On these boards this was broken for long time but
apparently no one enabled this driver till now.
2. Fix creation of debugfs entries for one regulator on Exynos4210
Trats board.
3. Fix probing of max8997 MFD driver (and its children) because
of missing interrupt. Actually the current version of the driver probes
(just without interrupts) but after switching to regmap and regmap-irq,
the interrupt will be mandatory.
* tag 'samsung-fixes-non-critical-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats
ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats
ARM: dts: exynos: Add MFC memory banks for Peach boards
ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
- add support for pmic wrapper mt6323
- add support for SoC mt2701
- enable gpt6 arch timer on mt7623
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=35R/
-----END PGP SIGNATURE-----
Merge tag 'v4.6-next-soc' of https://github.com/mbgg/linux-mediatek into next/drivers
Merge "ARM: mediatek soc updates for v4.7" from Matthias Brugger:
- re-organize pmic wrapper code for easier and cleaner addiont of new SoCs and pmic wrappers
- add support for pmic wrapper mt6323
- add support for SoC mt2701
- enable gpt6 arch timer on mt7623
* tag 'v4.6-next-soc' of https://github.com/mbgg/linux-mediatek:
ARM: mediatek: enable gpt6 on boot up to make arch timer work on mt7623
soc: mediatek: PMIC wrap: add MT2701/7623 support
soc: mediatek: PMIC wrap: add mt6323 slave support
soc: mediatek: PMIC wrap: add a slave specific struct
soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and pwrap_is_mt8173()
soc: mediatek: PMIC wrap: move wdt_src into the pmic_wrapper_type struct
soc: mediatek: PMIC wrap: SPI_WRITE needs a different bitmask for MT2701/7623
soc: mediatek: PMIC wrap: WRAP_INT_EN needs a different bitmask for MT2701/7623
soc: mediatek: PMIC wrap: split SoC specific init into callback
soc: mediatek: PMIC wrap: add wrapper callbacks for init_reg_clock
soc: mediatek: PMIC wrap: don't duplicate the wrapper data
These changes add support for the XUSB controller on Tegra124. It is an
XHCI compatible controller that replaces the existing EHCI controllers.
Support is enabled on Venice2, Jetson TK1 and Nyan-based Chromebooks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=NYo3
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-xusb-no-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/late
Merge "ARM: tegra: Enable the XUSB controller" from Thierry Reding:
These changes add support for the XUSB controller on Tegra124. It is an
XHCI compatible controller that replaces the existing EHCI controllers.
Support is enabled on Venice2, Jetson TK1 and Nyan-based Chromebooks.
* tag 'tegra-for-4.7-xusb-no-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable XUSB on Nyan
ARM: tegra: Enable XUSB on Jetson TK1
ARM: tegra: Enable XUSB on Venice2
ARM: tegra: Add Tegra124 XUSB controller
ARM: tegra: Move Tegra124 to the new XUSB pad controller binding
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XUlQ
-----END PGP SIGNATURE-----
Merge tag 'aspeed-for-4.7-arch' of https://github.com/shenki/linux into next/soc
Merge "aspeed arch tag for 4.7" from Joel Stanley <joel@jms.id.au>:
This is the initial pull request for the Aspeed BMC SoCs.
I put 4.7 in the subject for this and the subsequent requests but if it's a bit
late in the cycle then I understand.
Following review I got rid of the board file by pushing the functionality out
to a watchdog and clock driver, so it's just the Kconfig bits. I've also added
myself to maintainers for the Aspeed arch and drivers as I intend on looking
after them.
* tag 'aspeed-for-4.7-arch' of https://github.com/shenki/linux:
arm: Add Aspeed machine
- Allow TWD to be used on UP kernel, as the PREEMPT-RT and cyclictest
shows that TWD has a slightly better performance than i.MX timer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXKK+/AAoJEFBXWFqHsHzOJr4IAJzktSWFIAYlSPAfwh3Vpnf7
6kW2fTGN6QzRBXR20iTCBDgdhWEKRztRlIEPFQ7nae4kLmdoQZ5WNxaNNUUq2oFB
eePYpcogNebc38kfBq7Ou905UsLYloUn3TWELmhN95diMSkDctD5KfeRurRdGHsL
yszvANaHo6P4RM55SWItgGxeCK7lDaMQyWou5yWiBUgozQ5oOO8AkNv4va/5jxhw
sg8zSCRKPLEHdSowUAooQhOUrNkydbS4B9paXn5yPIbkkAu6csN8QKHynA1Vm8z/
nHy5F0srnRzprmVWs0z2+YjiMdEZj/t9NMCNk47gNrauRYosVP98wX9qoBGq93Q=
=5SG2
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Merge "The i.MX SoC updates for 4.7" from Shawn Guo":
- Allow TWD to be used on UP kernel, as the PREEMPT-RT and cyclictest
shows that TWD has a slightly better performance than i.MX timer.
* tag 'imx-soc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: always use TWD on IMX6Q
- Clock framework cleanup with the "Remove CLK_IS_ROOT" series
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcjaYUACgkQCwYYjhRyO9UZBgCfancMYVmODhUbS2FsaeGQqsgX
Q2EAoJuV6WkKlURVzGn3RMacRaNXwVRF
=/d5p
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-4.7-1' of git://git.infradead.org/linux-mvebu into next/soc
Merge "mvebu soc for 4.7" from Gregory CLEMENT:
- Clock framework cleanup with the "Remove CLK_IS_ROOT" series
* tag 'mvebu-soc-4.7-1' of git://git.infradead.org/linux-mvebu:
ARM: dove: Remove CLK_IS_ROOT
ARM: orion5x: Remove CLK_IS_ROOT
ARM: mv78xx0: Remove CLK_IS_ROOT
clocks to DaVinci clock framwork and are
required to support USB PHY clock setting from
USB PHY driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=3dg+
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.7/soc-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Merge "DaVinci SoC updates for v4.7 (part 2)" from Sekhar Nori:
These patches provide ability to add non-PSC
clocks to DaVinci clock framwork and are
required to support USB PHY clock setting from
USB PHY driver.
* tag 'davinci-for-v4.7/soc-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da850: use clk->set_parent for async3
ARM: davinci: Move clock init after ioremap.
This includes a few nonfunctional clean-ups for NXP LPC32xx:
* removed leftover from restart code migration to a watchdog driver
* removed dead code leftovers from migration to CCF driver
* fix double const qualifier
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=029c
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-soc-4.7' of git://github.com/vzapolskiy/linux-lpc32xx into next/soc
Merge "NXP LPC32xx mach updates for v4.7" from Vladimir Zapolskiy:
This includes a few nonfunctional clean-ups for NXP LPC32xx:
* removed leftover from restart code migration to a watchdog driver
* removed dead code leftovers from migration to CCF driver
* fix double const qualifier
* tag 'lpc32xx-soc-4.7' of git://github.com/vzapolskiy/linux-lpc32xx:
ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup
ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers
ARM: lpc32xx: remove reboot header file
Now that we know exactly which page sizes our caller wants to use in the
given domain, we can restrict higher-order allocation attempts to just
those sizes, if any, and avoid wasting any time or effort on other sizes
which offer no benefit. In the same vein, this also lets us accommodate
a minimum order greater than 0 for special cases.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As a set of driver-provided callbacks and static data, there is no
compelling reason for struct iommu_ops to be mutable in core code, so
enforce const-ness throughout.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a guest is initializing, KVM provides facility bits that can be
successfully used by the guest. It's done by applying
kvm_s390_fac_list_mask mask on host facility bits stored by the STFLE
instruction. Facility bits can be one of two kinds: it's either a
hypervisor managed bit or non-hypervisor managed.
The hardware provides information which bits need special handling.
Let's automatically passthrough to guests new facility bits, that
don't require hypervisor support.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's add hypervisor-managed facility-apportionment indications field to
SCLP structs. KVM will use it to reduce maintenance cost of
Non-Hypervisor-Managed facility bits.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some facility bits are in a range that is defined to be "ok for guests
without any necessary hypervisor changes". Enable those bits.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some hardware variants will round the ibc value up/down themselves,
others will report a validity intercept. Let's always round it up/down.
This patch will also make sure that the ibc is set to 0 in case we don't
have ibc support (lowest_ibc == 0).
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We only have one cpuid for all VCPUs, so let's directly use the one in the
cpu model. Also always store it directly as u64, no need for struct cpuid.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If we don't have SIGP SENSE RUNNING STATUS enabled for the guest, let's
not enable interpretation so we can correctly report an invalid order.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Only enable PFMF interpretation if the necessary facility (EDAT1) is
available, otherwise the pfmf handler in priv.c will inject an exception
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
A couple of netlogic assembly files define CP0_EBASE to $15, the same as
CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and
CP0_EBase registers. However commit 609cf6f229 ("MIPS: CPS: Early
debug using an ns16550-compatible UART") added a different definition of
CP0_EBASE to mipsregs.h, which included a register select of 1. This
causes harmless build warnings like the following:
arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined
#define CP0_EBASE $15
^
In file included from arch/mips/netlogic/common/reset.S:41:0:
./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition
#define CP0_EBASE $15, 1
^
Update the code to use the definitions from mipsregs.h for accessing
both registers.
Fixes: 609cf6f229 ("MIPS: CPS: Early debug using an ns16550-compatible UART")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13183/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Update the recent changes to set_pte() that were added in 46011e6ea3
to handle R10000_LLSC_WAR, and format the assembly to match other areas
of the MIPS tree using the same WAR.
This also incorporates a patch recently sent in my Markos Chandras,
"Remove local LL/SC preprocessor variants", so that patch doesn't need
to be applied if this one is accepted.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Fixes: 46011e6ea3 ("MIPS: Make set_pte() SMP safe.)
Cc: David Daney <david.daney@cavium.com>
Cc: Linux/MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/11103/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Inspired by Markos Chandras' patch. I just didn't want do pull bitsops.h
into pgtable.h.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
References: https://patchwork.linux-mips.org/patch/11052/
Building an MSA capable kernel with a toolchain that supports MSA
produces warnings such as this:
arch/mips/kernel/r4k_fpu.S:229: Warning: the `msa' extension requires 64-bit FPRs
This is due to ".set msa" without ".set fp=64" in the non doubleword MSA
load/store macros, since MSA requires the 64-bit FPU registers (FR=1).
Add the missing fp=64 in these macros to silence the warnings.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13063/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When lockdep is enabled on a 64-bit kernel the FPR offset into the
thread structure exceeds the maximum range of the MSA ld.d/st.d
instructions. For example THREAD_FPR31 = 4644 (instead of 2448), while
the signed immediate field is only 10 bits with an implicit multiply by
8, giving a maximum offset of 511*8 = 4088.
This isn't a problem when the toolchain doesn't support MSA as the
ld_*/st_* macros perform the addition separately into $1 with [d]addui
which has a 16bit signed immediate field.
Fix the case where the toolchain does support MSA by doing a single
addition of THREAD_FPR0 into $1 with [d]addui, and doing the ld_*/st_*
relative to that.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13064/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MSA ld_*/st_* assembler macros for when the toolchain doesn't
support MSA use addu to offset the base address. However it is a virtual
memory pointer so fix it to use PTR_ADDU which expands to daddu for
64-bit kernels.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.3.y-
Patchwork: https://patchwork.linux-mips.org/patch/13062/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In revision 1.12 of the MSA specification, the copy_u.w instruction has
been removed for MIPS32 & the copy_u.d instruction has been removed for
MIPS64. Newer toolchains (eg. Codescape SDK essentials 2015.10) will
complain about this like so:
arch/mips/kernel/r4k_fpu.S:290: Error: opcode not supported on this
processor: mips32r2 (mips32r2) `copy_u.w $1,$w26[3]'
Since we always copy to the width of a GPR, simply use copy_s instead of
copy_u to fix this.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.3.x+
Patchwork: https://patchwork.linux-mips.org/patch/13061/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Error recovery pointers for fixups was improperly set as ".word"
which is unsuitable for MIPS64.
Replaced by STR(PTR)
[ralf@linux-mips.org: Apply changes as requested in the review process.]
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: b0a668fb20 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6")
Cc: macro@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/9911/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch ensures that the dev parameter is checked for NULL before it
is dereferenced in massage_gfp_flags. If dev is NULL, then fall back
setting the GFP flag requested and available.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11919/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
After commit 92923ca3aa ("mm: meminit: only set page reserved
in the memblock region"), the MIPS hibernation is broken. Because pages
in nosave data section should be "reserved", but currently they aren't
set to "reserved" at initialization. This patch makes hibernation work
again.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12888/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 6793f55cbc ("MIPS: sibyte: Amend dependencies for
SIBYTE_BUS_WATCHER") changed the dependencies for
SIBYTE_BUS_WATCHER to make it visible only if SIBYTE_BCM112X
or SIBYTE_SB1250 are enabled.
In the code in arch/mips/sibyte/common/bus_watcher, however,
a #if defined() check suggests that this functionality should
also be available for SIBYTE_BCM1x55 and SIBYTE_BCM1x80.
Make it selectable by extending the dependencies of
SIBYTE_BUS_WATCHER in arch/mips/sibyte/Kconfig.
Reported-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Cc: valentinrothberg@gmail.com
Cc: stefan.hengelein@fau.de
Cc: pebolle@tiscali.nl
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10736/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Coherence Manager 3 (CM3) as present in I6400 can fill icache lines
effectively from dirty dcaches, so there is no need to flush dirty lines
from dcaches through to L2 prior to icache invalidation.
Set the MIPS_CACHE_IC_F_DC flag such that cpu_has_ic_fills_f_dc
evaluates to true, which avoids those dcache flushes.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12180/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
It is still necessary to handle icache coherency in flush_cache_range()
and copy_to_user_page() when the icache fills from the dcache, even
though the dcache does not need to be written back. However when this
handling was added in commit 2eaa7ec286 ("[MIPS] Handle I-cache
coherency in flush_cache_range()"), it did not do any icache flushing
when it fills from dcache.
Therefore fix r4k_flush_cache_range() to run
local_r4k_flush_cache_range() without taking into account whether icache
fills from dcache, so that the icache coherency gets handled. Checks are
also added in local_r4k_flush_cache_range() so that the dcache blast
doesn't take place when icache fills from dcache.
A test to mmap a page PROT_READ|PROT_WRITE, modify code in it, and
mprotect it to VM_READ|VM_EXEC (similar to case described in above
commit) can hit this case quite easily to verify the fix.
A similar check was added in commit f8829caee3 ("[MIPS] Fix aliasing
bug in copy_to_user_page / copy_from_user_page"), so also fix
copy_to_user_page() similarly, to call flush_cache_page() without taking
into account whether icache fills from dcache, since flush_cache_page()
already takes that into account to avoid performing a dcache flush.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12179/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
HARDWARE_WATCHPOINTS isn't being enabled for CPU_MIPSR6, even though it
has an identical hardware watchpoint interface to CPU_MIPSR2, which
prevents ptrace watchpoints from being loaded when executing a ptraced
process even though the watchpoints are described in /proc/cpuinfo.
Enable HARDWARE_WATCHPOINTS for CPU_MIPSR6 too.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12727/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit f51246efee ("MIPS: Get rid of finish_arch_switch().") moved the
__restore_watch() call from finish_arch_switch() (i.e. after resume()
returns) to before the resume() call in switch_to(). This results in
watchpoints only being restored when a task is descheduled, preventing
the watchpoints from being effective most of the time, except due to
chance before the watchpoints are lazily removed.
Fix the call sequence from switch_to() through to
mips_install_watch_registers() to pass the task_struct pointer of the
next task, instead of using current. This allows the watchpoints for the
next (non-current) task to be restored without reintroducing
finish_arch_switch().
Fixes: f51246efee ("MIPS: Get rid of finish_arch_switch().")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.3.x-
Patchwork: https://patchwork.linux-mips.org/patch/12726/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When showing backtraces in response to traps, for example crashes and
address errors (usually unaligned accesses) when they are set in debugfs
to be reported, unwind_stack will be used if the PC was in the kernel
text address range. However since EVA it is possible for user and kernel
address ranges to overlap, and even without EVA userland can still
trigger an address error by jumping to a KSeg0 address.
Adjust the check to also ensure that it was running in kernel mode. I
don't believe any harm can come of this problem, since unwind_stack() is
sufficiently defensive, however it is only meant for unwinding kernel
code, so to be correct it should use the raw backtracing instead.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/11701/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit d2941a975ac745c607dfb590e92bb30bc352dad9)
When unwinding through IRQs and exceptions, the unwinding only continues
if the PC is a kernel text address, however since EVA it is possible for
user and kernel address ranges to overlap, potentially allowing
unwinding to continue to user mode if the user PC happens to be in the
kernel text address range.
Adjust the check to also ensure that the register state from before the
exception is actually running in kernel mode, i.e. !user_mode(regs).
I don't believe any harm can come of this problem, since the PC is only
output, the stack pointer is checked to ensure it resides within the
task's stack page before it is dereferenced in search of the return
address, and the return address register is similarly only output (if
the PC is in a leaf function or the beginning of a non-leaf function).
However unwind_stack() is only meant for unwinding kernel code, so to be
correct the unwind should stop there.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/11700/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>