Commit graph

127,691 commits

Author SHA1 Message Date
Florian Fainelli
f6cc0ee98b MIPS: BMIPS: Fill in current_cpu_data.core
Read the core ID in bmips_smp_finish() for BMIPS5000 CPUs to get appropriate
processor parenting in set_cpu_sibling_map().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: jaedon.shin@gmail.com
Cc: dragan.stancevic@gmail.com
Cc: jogo@openwrt.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12380/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:01 +02:00
Florian Fainelli
904c3b4952 MIPS: BMIPS: Remove maxcpus from BCM97435SVMB DTS
Now that SMP properly works on 7435, do not restrict the number of core,
unleash them all.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: jaedon.shin@gmail.com
Cc: dragan.stancevic@gmail.com
Cc: jogo@openwrt.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12379/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:01 +02:00
Florian Fainelli
a5b143ec51 MIPS: BMIPS: Add missing 7038 L1 register cells to BCM7435
7435 has 4 7038 L1 base register address for each of its Core + TP (for a total
of 4 threads of execution), add the two missing cells for Core 1. We are
providing HW interrupts 2/3 even for Core 1/TP0/TP1 because that's what they
are, and we can later decide to remap these in software to provide proper
interrupt affinity/parenting.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: jaedon.shin@gmail.com
Cc: dragan.stancevic@gmail.com
Cc: jogo@openwrt.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12378/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:01 +02:00
Ralf Baechle
f241265fdc MIPS: BMIPS: Make whitespacely correct.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:01 +02:00
Florian Fainelli
21b30c00f3 MIPS: BMIPS: Add Whirlwind (BMIPS5200) initialization code
Import bmips_5xxx_init.S from the stblinux-3.3 tree, and to make sure that this
would work nicely with a BMIPS multiplatform kernel (with BMIPS330, BMIPS43XX
and BMIPS5000 enabled), update soft_reset to check for the BMIPS5200 processor
id (PRID_IMP_BMIPS5200) and execute bmips_5xxx_init for these processors to
bring them online.

Tested on 7425, 7429 and 7435 with CPU hotplug. 7435 SMP still needs some
additional changes in the L1 interrupt area to work properly with interrupt
affinity.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: jaedon.shin@gmail.com
Cc: dragan.stancevic@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/12377/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:01 +02:00
Florian Fainelli
cbbda6e7c9 MIPS: BMIPS: Fix PRID_IMP_BMIPS5000 masking for BMIPS5200
BMIPS5000 have a PrID value of 0x5A00 and BMIPS5200 have a PrID value of
0x5B00, which, masked with 0x5A00, returns 0x5A00. Update all conditionals on
the PrID to cover both variants since we are going to need this to enable
BMIPS5200 SMP. The existing check, masking with 0xFF00 would not cover
BMIPS5200 at all.

Fixes: 68e6a78373 ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)")
Fixes: 6465460c92 ("MIPS: BMIPS: change compile time checks to runtime checks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: jaedon.shin@gmail.com
Cc: jfraser@broadcom.com
Cc: pgynther@google.com
Cc: dragan.stancevic@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12279/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:01 +02:00
Paul Burton
578bffc82e MIPS: Don't BUG_ON when no IPI domain is found
Commit fbde2d7d82 ("MIPS: Add generic SMP IPI support") introduced
code that BUG_ON's in the case of a kernel that supports IPI domains but
does not have one at runtime. This case is possible on Malta where for
IPIs we may use either the GIC (which has an IPI IRQ domain
implementation) or core-local software interrupts between VPEs (which do
not currently have an IPI IRQ domain implementation). We can not know
which will be used until runtime when we know whether a GIC is actually
present, and if we run on a system with multiple VPEs and no GIC then
the BUG_ON is hit.

Commit 19fb5818ed ("IPS: Fix broken malta qemu") worked around this
for the single-core single-VPE case typically seen using QEMU, but does
not catch the multi-VPE case. This patch removes the insufficient CPU
presence check that was added and works around the bug differently,
effectively reverting that commit.

A simple way to reproduce this bug is by using QEMU, which partially
implements the MT ASE but does not implement the GIC as of version 2.5.
Using "-cpu 34Kf -smp 2" will present a system with 2 VPEs in one core &
no GIC, hitting the BUG_ON.

Given that we're post-merge-window on the way to v4.6, avoid this by
just returning from mips_smp_ipi_init when no IPI IRQ domain is found.
Ideally at some point all IPI implementations would be converted to the
same IPI IRQ domain interface & we'd be able to restore the check.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Qais Yousef <qsyousef@gmail.com>
Fixes: fbde2d7d82 ("MIPS: Add generic SMP IPI support")
Fixes: 19fb5818ed ("IPS: Fix broken malta qemu")
Reverts: 19fb5818ed ("IPS: Fix broken malta qemu")
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13007/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:00 +02:00
James Hogan
5daebc477d MIPS: Fix siginfo.h to use strict posix types
Commit 85efde6f4e ("make exported headers use strict posix types")
changed the asm-generic siginfo.h to use the __kernel_* types, and
commit 3a471cbc08 ("remove __KERNEL_STRICT_NAMES") make the internal
types accessible only to the kernel, but the MIPS implementation hasn't
been updated to match.

Switch to proper types now so that the exported asm/siginfo.h won't
produce quite so many compiler errors when included alone by a user
program.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Christopher Ferris <cferris@google.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 2.6.30-
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12477/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:00 +02:00
Corey Minyard
c80e1b62ff MIPS: Fix crash registers on non-crashing CPUs
As part of handling a crash on an SMP system, an IPI is send to
all other CPUs to save their current registers and stop.  It was
using task_pt_regs(current) to get the registers, but that will
only be accurate if the CPU was interrupted running in userland.
Instead allow the architecture to pass in the registers (all
pass NULL now, but allow for the future) and then use get_irq_regs()
which should be accurate as we are in an interrupt.  Fall back to
task_pt_regs(current) if nothing else is available.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13050/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:00 +02:00
Nikolay Martynov
e03ac9f0c3 mips: Fix CPC_BASE_ADDR mask to match datasheet
According to 'MIPS32® interAptivTM Multiprocessing
System Programmer’s Guide' CPC_BASE_ADDR takes bits [31:15].

This change is tested ith mt7621 which wasn't working without it.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11766/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09 12:00:00 +02:00
Joel Stanley
d0bc3483da arm/configs: Add Aspeed defconfig
Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 19:12:30 +09:30
Joel Stanley
0d0f88969d arm/configs/multi_v5: Add Aspeed ast2400
This adds the Aspeed ast2400 BMC SoC to the build.

The SoC has six UARTs so we need to enable the appropriate options for
SERIAL_8250

Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 19:08:05 +09:30
Joel Stanley
0244062265 arm/dst: Add Aspeed ast2500 device tree
This adds a common device tree for all fifth generation Aspeed systems,
and a board specific device tree for the ast2500 evaluation board.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 17:41:58 +09:30
Joel Stanley
d44a1138cd arm/dts: Add Aspeed ast2400 device tree
A common device tree for all forth gen/ast2400 systems and a board
specific dts for the Palmetto OpenPower developemnt machine which was
used for testing.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 17:41:58 +09:30
Joel Stanley
8c2ed9bcfb arm: Add Aspeed machine
Aspeed devices are a common Baseboard Management Controller (BMC)
system on chip containing an ARM9 or ARM11 core, off-chip DDR RAM and
support for a large number of peripherals.

This patch adds basic support for the ast2400 and ast2500 machines,
capable of booting to a prompt in QEMU (-M palmetto-bmc), on an
Palmetto OpenPower development machine, and on the ast2500 EVB.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 17:41:14 +09:30
Greg Kroah-Hartman
10ee082920 Merge 4.6-rc7 into tty-next
We want the pty fixes in here as well so that patches can build on it.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09 09:39:13 +02:00
Noam Camus
966657890e ARC: Add eznps platform to Kconfig and Makefile
This commit should be left last since only now eznps platform
is in state which one can actually use.
Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09 09:32:33 +05:30
Noam Camus
085572f3cc ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
The default 256 bytes sometimes is just not enough.
We usually provide earlycon=... and console=... and ip=...
All this and more may need more room.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:33 +05:30
Tal Zilcer
46c3e6b876 ARC: [plat-eznps] Use dedicated cpu_relax()
Since the CTOP is SMT hardware multi-threaded, we need to hint
the HW that now will be a very good time to do a hardware
thread context switching. This is done by issuing the schd.rw
instruction (binary coded here so as to not require specific
revision of GCC to build the kernel).
sched.rw means that Thread becomes eligible for execution by
the threads scheduler after all pending read/write
transactions were completed.

Implementing cpu_relax_lowlatency() with barrier()
Since with current semantics of cpu_relax() it may take a
while till yielded CPU will get back.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:33 +05:30
Noam Camus
86c25466f7 ARC: [plat-eznps] Use dedicated identity auxiliary register.
With generic "identity" num of CPUs is limited to 256 (8 bit).
We use our alternative AUX register GLOBAL_ID (12 bit).
Now we can support up to 4096 CPUs.

Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09 09:32:33 +05:30
Noam Camus
b1f2f6f3cf ARC: [plat-eznps] Use dedicated SMP barriers
NPS device got 256 cores and each got 16 HW threads (SMT).
We use EZchip dedicated ISA to trigger HW scheduler of the
core that current HW thread belongs to.
This scheduling makes sure that data beyond barrier is available
to all HW threads in core and by that to all in device (4K).

Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
2016-05-09 09:32:33 +05:30
Noam Camus
a5a10d99a9 ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
We need our own implementaions since we lack LLSC support.
Our extended ISA provided with optimized solution for all 32bit
operations we see in these three headers.
Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09 09:32:33 +05:30
Noam Camus
8bcf2c48f3 ARC: [plat-eznps] Use dedicated user stack top
NPS use special mapping right below TASK_SIZE.
Hence we need to lower STACK_TOP so that user stack won't
overlap NPS special mapping.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:32 +05:30
Noam Camus
4a66d3fecf ARC: [plat-eznps] Add eznps platform
This platform include boards:
	Hardware Emulator (HE)
	Simulator based upon nSIM.

Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09 09:32:32 +05:30
Noam Camus
845033be00 ARC: [plat-eznps] Add eznps board defconfig and dts
Adding default configuration file and DTS file

Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09 09:32:32 +05:30
Noam Camus
71f9cf8fdd ARC: Mark secondary cpu online only after all HW setup is done
In SMP setup, master loops for each_present_cpu calling cpu_up().
For ARC it returns as soon as new cpu's status becomes online,
However secondary may still do HW initializing,
machine or platform hook level.

So turn secondary online only after all HW setup is done.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:32 +05:30
Noam Camus
2a1021fce8 ARC: rwlock: disable interrupts in !LLSC variant
If we hold rwlock and interrupt occures we may
end up spinning on it for ever during softirq.
Note that this lock is an internal lock
and since the lock is free to be used from any context,
the lock needs to be IRQ-safe.

Below you may see an example for interrupt we get while
nl_table_lock is holding its rw->lock_mutex and we spinned
on it for ever.

The concept for the fix was taken from SPARC.

[2015-05-12 19:16:12] Stack Trace:
[2015-05-12 19:16:12]   arc_unwind_core+0xb8/0x11c
[2015-05-12 19:16:12]   dump_stack+0x68/0xac
[2015-05-12 19:16:12]   _raw_read_lock+0xa8/0xac
[2015-05-12 19:16:12]   netlink_broadcast_filtered+0x56/0x35c
[2015-05-12 19:16:12]   nlmsg_notify+0x42/0xa4
[2015-05-12 19:16:13]   neigh_update+0x1fe/0x44c
[2015-05-12 19:16:13]   neigh_event_ns+0x40/0xa4
[2015-05-12 19:16:13]   arp_process+0x46e/0x5a8
[2015-05-12 19:16:13]   __netif_receive_skb_core+0x358/0x500
[2015-05-12 19:16:13]   process_backlog+0x92/0x154
[2015-05-12 19:16:13]   net_rx_action+0xb8/0x188
[2015-05-12 19:16:13]   __do_softirq+0xda/0x1d8
[2015-05-12 19:16:14]   irq_exit+0x8a/0x8c
[2015-05-12 19:16:14]   arch_do_IRQ+0x6c/0xa8
[2015-05-12 19:16:14]   handle_interrupt_level1+0xe4/0xf0

Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
2016-05-09 09:32:32 +05:30
Noam Camus
15ca68a993 ARC: Make vmalloc size configurable
On ARC, lower 2G of address space is translated and used for
 - user vaddr space (region 0 to 5)
 - unused kernel-user gutter (region 6)
 - kernel vaddr space (region 7)

where each region simply represents 256MB of address space.

The kernel vaddr space of 256MB is used to implement vmalloc, modules
So far this was enough, but not on EZChip system with 4K CPUs (given
that per cpu mechanism uses vmalloc for allocating chunks)

So allow VMALLOC_SIZE to be configurable by expanding down into the unused
kernel-user gutter region which at default 256M was excessive anyways.

Also use _BITUL() to fix a build error since PGDIR_SIZE cannot use "1UL"
as called from assembly code in mm/tlbex.S

Signed-off-by: Noam Camus <noamc@ezchip.com>
[vgupta: rewrote changelog, debugged bootup crash due to int vs. hex]
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:32 +05:30
Noam Camus
4bb40c6d6c ARC: clean out UAPI byteorder.h clean off Kconfig symbol
UAPI header should not use Kconfig items

Use __BIG_ENDIAN__ defined as a compiler intrinsic

Signed-off-by: Noam Camus <noamc@ezchip.com>
[vgupta: fix changelog]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:31 +05:30
Alexey Brodkin
6e9318d1be ARC: RIP arc_{get|set}_core_freq() clk API
There are no more users of this - so RIP!

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: update changelog]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:31 +05:30
Alexey Brodkin
20c7dbbdbe ARC: Don't try to use value of top level clock-frequency in DT
We no longer use it and instead a real clk device such as fixed-clk
instance is fed to timers etc.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: broken out of a bigger patch, rewrote changelog]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:30 +05:30
Alexey Brodkin
0e6e9b648d ARC: use fixed frequencies in arc_set_early_base_baud()
UARTs usually have fixed clock so we're switching to use of
constant values instead of something derived from core clock
frequency.

Among other things this will allow us to get rid of
arc_{get|set}_core_freq() and switch to generic clock
framework later on.

Acked-by: Christian Ruppert <christian.ruppert@alitech.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:30 +05:30
Vineet Gupta
d21beffb0b ARC: [intc-*] switch to linear domain
Now that we have Timers probed from DT, don't need legacy domain

This however requires mapping to be called explicitly for the IRQ which
still can't (and probably never) be probed from DT such as IPI and
SOFTIRQ

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:30 +05:30
Vineet Gupta
1b0ccb8a4e ARC: [intc-*] Do a domain lookup in primary handler for hwirq -> linux virq
The primary interrupt handler arch_do_IRQ() was passing hwirq as linux
virq to core code. This was fragile and worked so far as we only had legacy/linear
domains.

This came out of a rant by Marc Zyngier.
http://lists.infradead.org/pipermail/linux-snps-arc/2015-December/000298.html

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:30 +05:30
Vineet Gupta
88555cc584 ARC: irq: export some IRQs again
This will be needed for switching to linear irq domain as
irq_create_mapping() called by intr code needs the IRQ numbers
in addition to existing usage in mcip.c for requesting the irq

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:30 +05:30
Vineet Gupta
e608b53ea8 ARC: clocksource: DT based probe
- Remove explicit clocksource setup and let it be done by OF framework
  by defining CLOCKSOURCE_OF_DECLARE() for various timers

- This allows multiple clocksources to be potentially registered
  simultaneouly: previously we could only do one - as all of them had
  same arc_counter_setup() routine for registration

- Setup routines also ensure that the underlying timer actually exists.

- Remove some of the panic() calls if underlying timer is NOT detected as
  fallback clocksource might still be available
  1. If GRFC doesn't exist, jiffies clocksource gets registered anyways
  2. if RTC doesn't exist, TIMER1 can take over (as it is always
     present)

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:30 +05:30
Vineet Gupta
77c8d0d6b3 ARC: clockevent: DT based probe
- timer frequency is derived from DT (no longer rely on top level
   DT "clock-frequency" probed early and exported by asm/clk.h)

 - TIMER0_IRQ need not be exported across arch code, confined to intc as
   it is property of same

 - Any failures in clockevent setup are considered pedantic and system
   panic()'s as there is no generic fallback (unlike clocksource where
   a jiffies based soft clocksource always exists)

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Vineet Gupta
7ec9f34a03 ARC: [dts] Introduce Timer bindings
ARC Timers have historically been probed directly.
As precursor to start probing Timers thru DT introduce these bindings
Note that to keep series bisectable, these bindings are not yet used in
code.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Vineet Gupta
b3d6aba8bd ARC: [dts] Add clk feeding into timers to DTs
This allows us to introduce timers in DT in next commit

The core clk frequency hack in AXS103 platform is also extended,
where the core clk feeding into timers is updated in-place in FDT.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Vineet Gupta
9ba7648cc9 ARC: [dts] Rename cpu_intc -> core_intc
This is again for future changes to use common DTSI for timers which
refer to @core_intc

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Vineet Gupta
2e8cd93877 ARCv2: [dts]: Introduce HS38 specific include DTS ...
... and add them to plat-sim DTS.

This allows for future change to introduce timers in DT in single place

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Noam Camus
69fbd09874 ARC: clockevent: Prepare for DT based probe
- call clocksource_probe()
 - This in turns needs of_clk_init() to be called earlier

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Noam Camus <noamc@ezchip.com>
[vgupta: broken off from a bigger patch]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Noam Camus
eec3c58efa ARC: clockevent: switch to cpu notifier for clockevent setup
ARC Timers so far have been handled as "legacy" w/o explicit description
in DT. This poses challenge for newer platforms wanting to use them.
This series will eventually help move timers over to DT.

This patch does a small change of using a CPU notifier to set clockevent
on non-boot CPUs. So explicit setup is done only on boot CPU (which will
later be done by DT)

Signed-off-by: Noam Camus <noamc@ezchip.com>
[vgupta: broken off from a bigger patch]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:28 +05:30
Vineet Gupta
0eeb3dfe4b ARC: [plat-axs] Refactor core freq get/set
Reduces diff in future patches !

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:28 +05:30
Vineet Gupta
569579401a ARC: opencode arc_request_percpu_irq
- The idea is to remove the API usage since it has a subltle
  design flaw - relies on being called on cpu0 first. This is true for
  some early per cpu irqs such as TIMER/IPI, but not for late probed
  per cpu peripherals such a perf. And it's usage in perf has already
  bitten us once: see c6317bc7c5
  ("ARCv2: perf: Ensure perf intr gets enabled on all cores") where we
  ended up open coding it anyways

- The seeming duplication will go away once we start using cpu notifier
  for timer setup

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:28 +05:30
Vineet Gupta
db4c4426da ARC: [intc-compact] setup TIMER as percpu_dev
This removes the quirk from arc_request_percpu_irq() and paves way for
future simplifications

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:28 +05:30
Dave Airlie
bafb86f5bc Linux 4.6-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXL7HfAAoJEHm+PkMAQRiGYe8IAJBGaPUq38EJh2YOV+AQf9v6
 t/alhwB3DUE1E0zjLy7I7JJ+xDXtKjZh9fS6OFuIS8Q3RIrBteIJ/oH8TPpt7yZ/
 SnP6rYPvYD6CImTyrh7+ORL/udEwJX8+YqFYAgUAq167gvpDjYj8r26VzdIaIN4/
 oBbL8NrQNWfODieywYyhUoitVhwMz09zmBfLtGVks4vd2jUJk2Fdd9cOtGV5tRfk
 DPndPgyQtbr8W0mKovV8sT9WkQeV5TsUr4MLgf7hjnAGYQ8+0KamkzzVVLBeBiiw
 uazyrOCFkddZp+N7KbmbOmazV/yULRuLGgDjVKazoCsOaKOvoGCzrCk7daOPy6Q=
 =CegX
 -----END PGP SIGNATURE-----

Merge tag 'v4.6-rc7' into drm-next

Merge this back as we've built up a fair few conflicts, and I have
some newer trees to pull in.
2016-05-09 13:49:56 +10:00
Priit Laes
068655dc9b ARM: sun7i: dt: Add pll3 and pll7 clocks
Enable pll3 and pll7 clocks that are needed by display clocks.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-05-08 21:09:29 +02:00
Olliver Schinagl
27dd9af6bc ARM: dts: sunxi: Add a olinuxino-lime2-emmc
There are 3 kinds of OLinuXino Lime2 boards.
One without any on board storage, one with NAND storage and one with
eMMC storage. This patch adds the eMMC variant of boards.

eMMC storage is different from a regular SD card in that it is soldered
on the board and cannot be changed. Additionally, it shares pins with
the NAND module and with the second SPI port.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
[Maxime: Removed the change log from the commit log]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-05-08 20:07:55 +02:00
Linus Torvalds
9125aeb3e2 Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
 "These are a number of updates to fix a few problems found in the ARM
  nommu code over the last couple of years, caused mostly by changes on
  the mmu side"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8573/1: domain: move {set,get}_domain under config guard
  ARM: 8572/1: nommu: change memory reserve for the vectors
  ARM: 8571/1: nommu: fix PMSAv7 setup
2016-05-07 08:27:35 -07:00