Commit graph

127,691 commits

Author SHA1 Message Date
Stephen Boyd
4558e9b319 arm64: dts: Add msm8996 SoC and MTP board support
Add initial device tree support for the Qualcomm MSM8996 SoC and
MTP8996 evaluation board.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-02-23 15:14:15 -06:00
Ard Biesheuvel
f98deee9a9 arm64: move brk immediate argument definitions to separate header
Instead of reversing the header dependency between asm/bug.h and
asm/debug-monitors.h, split off the brk instruction immediate value
defines into a new header asm/brk-imm.h, and include it from both.

This solves the circular dependency issue that prevents BUG() from
being used in some header files, and keeps the definitions together.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-23 17:43:25 +00:00
Ard Biesheuvel
8439e62a15 arm64: mm: use bit ops rather than arithmetic in pa/va translations
Since PAGE_OFFSET is chosen such that it cuts the kernel VA space right
in half, and since the size of the kernel VA space itself is always a
power of 2, we can treat PAGE_OFFSET as a bitmask and replace the
additions/subtractions with 'or' and 'and-not' operations.

For the comparison against PAGE_OFFSET, a mov/cmp/branch sequence ends
up getting replaced with a single tbz instruction. For the additions and
subtractions, we save a mov instruction since the mask is folded into the
instruction's immediate field.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-23 17:43:25 +00:00
Ard Biesheuvel
a92405f082 arm64: mm: only perform memstart_addr sanity check if DEBUG_VM
Checking whether memstart_addr has been assigned every time it is
referenced adds a branch instruction that may hurt performance if
the reference in question occurs on a hot path. So only perform the
check if CONFIG_DEBUG_VM=y.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[catalin.marinas@arm.com: replaced #ifdef with VM_BUG_ON]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-23 17:42:11 +00:00
Geliang Tang
d74c0e6b54 KVM: x86: use list_last_entry
To make the intention clearer, use list_last_entry instead of
list_entry.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-23 15:40:54 +01:00
Geliang Tang
652fc08dae KVM: x86: use list_for_each_entry*
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-23 15:40:54 +01:00
Takuya Yoshikawa
e9ee956e31 KVM: x86: MMU: Move handle_mmio_page_fault() call to kvm_mmu_page_fault()
Rather than placing a handle_mmio_page_fault() call in each
vcpu->arch.mmu.page_fault() handler, moving it up to
kvm_mmu_page_fault() makes the code better:

 - avoids code duplication
 - for kvm_arch_async_page_ready(), which is the other caller of
   vcpu->arch.mmu.page_fault(), removes an extra error_code check
 - avoids returning both RET_MMIO_PF_* values and raw integer values
   from vcpu->arch.mmu.page_fault()

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-23 14:20:27 +01:00
Takuya Yoshikawa
ded5874946 KVM: x86: MMU: Consolidate quickly_check_mmio_pf() and is_mmio_page_fault()
These two have only slight differences:
 - whether 'addr' is of type u64 or of type gva_t
 - whether they have 'direct' parameter or not

Concerning the former, quickly_check_mmio_pf()'s u64 is better because
'addr' needs to be able to have both a guest physical address and a
guest virtual address.

The latter is just a stylistic issue as we can always calculate the mode
from the 'vcpu' as is_mmio_page_fault() does.  This patch keeps the
parameter to make the following patch cleaner.

In addition, the patch renames the function to mmio_info_in_cache() to
make it clear what it actually checks for.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-23 14:20:27 +01:00
Maxime Coquelin
a985b66ae5 ARM: dts: stm32f429: Fix clocks referenced by GPIO banks
All the clocks referenced by the GPIO banks were not the good ones.

Reported-by: Bruno Herrera <bruherrera@gmail.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
2016-02-23 13:35:25 +01:00
Martin Schwidefsky
13c6a790d7 s390/mm: correct comment about segment table entries
The comment describing the bit encoding for segment table entries
is incorrect in regard to the read and write bits. The segment
read bit is 0x0002 and write is 0x0001, not the other way around.

Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:20 +01:00
Heiko Carstens
758d39ebd3 s390/dumpstack: merge all four stack tracers
We have four different stack tracers of which three had bugs. So it's
time to merge them to a single stack tracer which allows to specify a
call back function which will be called for each step.

This patch changes behavior a bit:

- the "nosched" and "in_sched_functions" check within
  save_stack_trace_tsk did work only for the last stack frame within a
  context. Now it considers the check for each stack frame like it
  should.

- both the oprofile variant and the perf_events variant did save a
  return address twice if a zero back chain was detected, which
  indicates an interrupt frame. The new dump_trace function will call
  the oprofile and perf_events backends with the psw address that is
  contained within the corresponding pt_regs structure instead.

- the original show_trace and save_context_stack functions did already
  use the psw address of the pt_regs structure if a zero back chain
  was detected. However now we ignore the psw address if it is a user
  space address. After all we trace the kernel stack and not the user
  space stack. This way we also get rid of the garbage user space
  address in case of warnings and / or panic call traces.

So this should make life easier since now there is only one stack
tracer left which we can break.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:20 +01:00
Martin Schwidefsky
3c2c126a67 s390/mm: remove unnecessary indirection with pgste_update_all
The first parameter of pgste_update_all is a pointer to a pte.
Simplify the code by passing the pte value.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:19 +01:00
Heiko Carstens
1f021ea0da s390/dumpstack: use bit fields to decode psw mask in show_registers()
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:19 +01:00
Heiko Carstens
ca0fd75a54 s390/dumpstack: add missing ri bit to show_registers() output
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:18 +01:00
Heiko Carstens
76737ce17a s390: add current_stack_pointer() helper function
Implement current_stack_pointer() helper function and use it
everywhere, instead of having several different inline assembly
variants.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:18 +01:00
Heiko Carstens
77ec8a5451 s390/stacktrace: use nosched instead of savesched parameter
Use the inversed "nosched" logic like all other architectures.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:17 +01:00
Martin Schwidefsky
007ccec53d s390/pageattr: do a single TLB flush for change_page_attr
The change of the access rights for an address range in the kernel
address space is currently done with a loop of IPTE + a store of the
modified PTE. Between the IPTE and the store the PTE will be invalid,
this intermediate state can cause problems with concurrent accesses.

Consider a change of a kernel area from read-write to read-only, a
concurrent reader of that area should be fine but with the invalid
PTE it might get an unexpected exception.

Remove the IPTEs for each PTE and do a global flush after all PTEs
have been modified.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:17 +01:00
Martin Schwidefsky
2cfc5f9ce7 s390/xor: optimized xor routing using the XC instruction
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:17 +01:00
Sebastian Ott
9a99649f2a s390/pci: remove pdev pointer from arch data
For each PCI function we need to maintain arch specific data in
struct zpci_dev which also contains a pointer to struct pci_dev.

When a function is registered or deregistered (which is triggered by PCI
common code) we need to adjust that pointer which could interfere with
the machine check handler (triggered by FW) using zpci_dev->pdev.

Since multiple instances of the same pdev could exist at a time this can't
be solved with locking.

Fix that by ditching the pdev pointer and use a bus walk to reach
struct pci_dev (only one instance of a pdev can be registered at the bus
at a time).

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:16 +01:00
Alexey Brodkin
3e5177c191 arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCE
Even though DEVTMPFS is required when our pre-built initramfs
is used it is not the case in general. It is perfectly possible
to use initramfs with device nodes already populated or there
could be other usages, see discussion below for more detials:
http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/37819/focus=37821

This change removes mentioned dependency from arch/arc/Kconfig
updating instead those defconfigs that are usually used with this
kind of pre-build initramfs.

And while at it all touched defconfigs were regenerated via
savedefconfig and some options were removed:
 * USB is selected by other options implicitly
 * VGA_CONSOLE is disableb for ARC since
   031e29b587
 * EXT3_FS automatically selects EXT4_FS
 * MTDxxx and JFFS2_FS make no sense for AXS because
   AXS NAND controller is not upstreamed
 * NET_OSCI_LAN is not in upstream as well
 * ARCPGU_xxx options make no sense because ARC PGU is not yet
   in upstream and when it gets there all config options would
   be taken from devicetree

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-23 12:31:04 +05:30
Bryan O'Donoghue
c637fa5294 x86/platform/intel/quark: Drop IMR lock bit support
Isolated Memory Regions support a lock bit. The lock bit in an IMR prevents
modification of the IMR until the core goes through a warm or cold reset.
The lock bit feature is not useful in the context of the kernel API and is
not really necessary since modification of IMRs is possible only from
ring-zero anyway. This patch drops support for IMR locks bits, it
simplifies the kernel API and removes an unnecessary and needlessly complex
feature.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Cc: boon.leong.ong@intel.com
Cc: paul.gortmaker@windriver.com
Link: http://lkml.kernel.org/r/1456190999-12685-3-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-23 07:37:23 +01:00
Ingo Molnar
fb86780bf7 Merge branch 'x86/urgent' into x86/platform, to queue up dependent patch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-23 07:36:46 +01:00
Bryan O'Donoghue
dd71a17b11 x86/platform/intel/quark: Change the kernel's IMR lock bit to false
Currently when setting up an IMR around the kernel's .text section we lock
that IMR, preventing further modification. While superficially this appears
to be the right thing to do, in fact this doesn't account for a legitimate
change in the memory map such as when executing a new kernel via kexec.

In such a scenario a second kernel can have a different size and location
to it's predecessor and can view some of the memory occupied by it's
predecessor as legitimately usable DMA RAM. If this RAM were then
subsequently allocated to DMA agents within the system it could conceivably
trigger an IMR violation.

This patch fixes the this potential situation by keeping the kernel's .text
section IMR lock bit false by default.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boon.leong.ong@intel.com
Cc: paul.gortmaker@windriver.com
Link: http://lkml.kernel.org/r/1456190999-12685-2-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-23 07:35:53 +01:00
David S. Miller
b633353115 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/bcm7xxx.c
	drivers/net/phy/marvell.c
	drivers/net/vxlan.c

All three conflicts were cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23 00:09:14 -05:00
Pali Rohár
b950762c3b ARM: dts: n900: Rename isp1704 to isp1707 to match correct name
This change does not break existing userspace or Maemo software because
isp1704_charger.c always export power supply device under isp1704 name.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-02-23 03:25:54 +01:00
Krzysztof Kozlowski
c87b3e970c arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
The ARMv8 Exynos family SoCs in Linux kernel are currently:
 - Exynos5433 (controlled by ARCH_EXYNOS),
 - Exynos7 (controlled by ARCH_EXYNOS7).

It duplicates Kconfig symbols unnecessarily, so consolidate them into
one ARCH_EXYNOS. Future SoCs could fall also under the ARCH_EXYNOS
symbol.

The commit should not bring any visible functional change.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
2016-02-23 08:49:46 +09:00
Linus Torvalds
692b8c663c Xen bug fixes for 4.5-rc5
- Two scsiback fixes (resource leak and spurious warning).
 - Fix DMA mapping of compound pages on arm/arm64.
 - Fix some pciback regressions in MSI-X handling.
 - Fix a pcifront crash due to some uninitialize state.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWyvatAAoJEFxbo/MsZsTRBFcH+wWnv0/N+gKib3cKCI4lwmTg
 n8iVgf8dNWwD36M2s/OlzCAglAIt8Xr6ySNvPqTerpm7lT9yXlIVQxGXTbIGuTAA
 h8Kt8WiC0BNLHHlLxBuCz62KR47DvMhsr84lFURE8FmpUiulFjXmRcbrZkHIMYRS
 l/X+xJWO1vxwrSYho0P9n3ksTWHm488DTPvZz3ICNI2G2sndDfbT3gv3tMDaQhcX
 ZaQR93vtIoldqk29Ga59vaVtksbgxHZIbasY9PQ8rqOxHJpDQbPzpjocoLxAzf50
 cioQVyKQ7i9vUvZ+B3TTAOhxisA2hDwNhLGQzmjgxe2TXeKdo3yjYwO6m1dDBzY=
 =VY/S
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen bug fixes from David Vrabel:

 - Two scsiback fixes (resource leak and spurious warning).

 - Fix DMA mapping of compound pages on arm/arm64.

 - Fix some pciback regressions in MSI-X handling.

 - Fix a pcifront crash due to some uninitialize state.

* tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.
  xen/pcifront: Report the errors better.
  xen/pciback: Save the number of MSI-X entries to be copied later.
  xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY
  xen: fix potential integer overflow in queue_reply
  xen/arm: correctly handle DMA mapping of compound pages
  xen/scsiback: avoid warnings when adding multiple LUNs to a domain
  xen/scsiback: correct frontend counting
2016-02-22 13:57:01 -08:00
Nishanth Menon
b9d3ec1d98 ARM: dts: am57xx-beagle-x15: Add eeprom information
Add EEPROM at 0x50 that describes the board configuration.
This is useful for userspace programs that may need to check board
revision and other similar information.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 11:18:40 -08:00
Adam Ford
89077c7145 ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV
The Logic PD SOM-LV has a USB Host Controller connected to 3-port
hub.  This enables the pin muxing for the host controller and
ehci-phy.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 11:07:28 -08:00
Tony Lindgren
8d08394f41 Merge branch 'n900-keys' into omap-for-v4.6/dt 2016-02-22 11:02:18 -08:00
Pali Rohár
97d7f2ff38 ARM: dts: n900: Use linux input defines instead hardcoded constants
This makes DTS structure more readable.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:58:06 -08:00
Adam Ford
ab8dd3aed0 ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
The Logic PD DM37xx SOM-LV devkit consists of a base board and a SOM.
While the SOM (System on Module) supports Bluetooth and WiFi, LPD did not
obtain an FCC ID, so anyone who uses it will have to go through certification.

I have only tested the Type 28 Display, SMSC9211 Ethernet, SD/MMC and basic
power management, however the overall current seems high.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:56:38 -08:00
Adam Ford
730d7dcf03 ARM: dts: omap3logic: Add PWM-Backlight
The backlight pin is shared with Timer 10 PWM.  This patch allows the
pwm_bl driver to enable the pwm run by this timer to dim the backlight.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:17:42 -08:00
Nishanth Menon
4a64f3222e ARM: omap2plus_defconfig: Enable AT24 eeprom
AT24 compatible eeproms are used in BB family and X15 boards.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:13:28 -08:00
Javier Martinez Canillas
b7d6073cad ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
Many OMAP3 boards have a TVP5150/1 video decoder attached to the OMAP3
ISP so enable support for its driver as a module to be able to test it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:11:05 -08:00
Javier Martinez Canillas
ea00ab5ba6 ARM: omap2plus_defconfig: Enable ISP support and dependencies
The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate
camera images processing. The ISP driver implements V4L2, Media Controller
and V4L2 sub-dev interfaces so enable support for the driver and all these
dependencies to allow video capture to be tested using this HW IP block.

Also, disable the I2C ancillary drivers auto-select option since the media
driver does not auto-select the ancillary devices that are attached to the
bridge because this depends on what's present in the supported OMAP boards.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:10:27 -08:00
Javier Martinez Canillas
57228f664b ARM: omap2plus_defconfig: Enable OMAP IOMMU support
OMAP3 media platform drivers (i.e: omap3isp) needs IOMMU support so
enable it to be able to test the OMAP3 Image Signal Processor (ISP).

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:10:06 -08:00
Peter Ujfalusi
731ec4d881 ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot
We still have some boards booting in legacy mode and they will need to have
the device/slave -> filter_fn mapping so we can convert the OMAP drivers
to use the new dmaengine API for requesting channels.
Only some OMAP24xx and OMAP3xxx boards can boot in legacy mode which means
we only need to provide the map for these SoCs.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:00:50 -08:00
Peter Ujfalusi
c4e357839e ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma
OMAP1 can not boot in DT mode and to be able to clean up the driver
regarding to the dmaengine API use (switching to the new API) the
device/slave -> filter mapping needs to be provided to the omap-dma driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 09:59:44 -08:00
Ivaylo Dimitrov
05cf1e030b ARM: dts: omap3-n900: Allow gpio keys to be disabled
Add linux,can-disable; to all gpios exported from gpio-keys driver, so
userspace can disable them

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 09:56:45 -08:00
Ivaylo Dimitrov
3f315c5b85 ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
Commit e7b11dc7b7 ("ARM: OMAP2+: Fix onenand rate detection to avoid
filesystem corruption") partially fixed onenand configuration when GPMC
module is reset. Finish the job by also providing the correct values in
ONENAND_REG_SYS_CFG1 register.

Fixes: e7b11dc7b7 ("ARM: OMAP2+: Fix onenand rate detection to avoid
filesystem corruption")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 09:24:10 -08:00
Tony Lindgren
d9d806b902 ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
If syscon_config.max_register is initialized like it should be, we have
omap_ctrl_read/write() fail with out of range register access at least
for omap3.

We have omap3.dtsi setting up a regmap range for scm_conf, but we now
have omap_ctrl_read/write() also attempt to use the regmap. However,
omap_ctrl_read/write() is also used for other register ranges in the
system control module (SCM).

Let's fix the issue by just removing the regmap_read/write() usage for
control module as suggested by Tero Kristo <t-kristo@ti.com>.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 09:22:38 -08:00
Masahiro Yamada
f57deb0be5 ARM: 8543/1: decompressor: rename suffix_y to compress-y
The "$(suffix_y)" no longer appears in the file names, but it just
specifies the method of the file compression.  The "compress-y" sounds
more suitable.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:56:31 +00:00
Masahiro Yamada
53f67545c2 ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile
The files piggy.$(suffix).S are similar enough to be merged into a
single file.  This also allows clean up of the Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:56:31 +00:00
Masahiro Yamada
b0b6abe5fd ARM: 8541/1: decompressor: drop redundant FORCE in Makefile
The object "piggy.$(suffix_y).o" is created from "piggy.$(suffix).S"
by the following pattern rule defined in scripts/Makefile.build:

  $(obj)/%.o: $(src)/%.S FORCE
          $(call if_changed_dep,as_o_S)

FORCE is already added to the prerequisite of the object there.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:56:31 +00:00
Masahiro Yamada
822ec1b6ea ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files
This code works fine here, but it is tricky to use "extra-y" for
specifying files to be removed during "make clean".  Kbuild provides
"clean-files" for this purpose.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:56:30 +00:00
Masahiro Yamada
684c12014b ARM: 8539/1: decompressor: drop more unneeded assignments to "targets"
The objects "font.o" and "misc.o" are contained in $(OBJS), and it
is already added to the "targets".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:56:30 +00:00
Masahiro Yamada
b44c72de44 ARM: 8538/1: decompressor: drop unneeded assignments to "targets"
The "targets" exists to specify which files need the corresponding
".*_cmd" files to be included during the build.  In other words, it
is used for files that need to detect the change of the command line
by if_changed, if_changed_dep, and if_changed_rule.  While, these
files are just copied by "$(call cmd,shipped)".  Adding them to the
"targets" is meaningless because $(call cmd,...) never creates
".*_cmd" files.  Such files as ".lib1funcs.S.cmd", ".ashldi3.S.cmd"
do not exist in the first place.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:56:29 +00:00
Arnd Bergmann
4d2b7d4cb4 ARM: 8532/1: uncompress: mark putc as inline
When CONFIG_DEBUG_ICEDCC is set, we don't use the platform
specific putc() function, but use icedcc_putc() instead, so
putc is unused and causes a compile time warning:

In file included from ../arch/arm/boot/compressed/misc.c:28:0:
arch/arm/mach-rpc/include/mach/uncompress.h:79:13: warning: 'putc' defined but not used [-Wunused-function]
arch/arm/mach-w90x900/include/mach/uncompress.h:30:13: warning: 'putc' defined but not used [-Wunused-function]

On most platforms, this does not happen, because putc is defined
as 'static inline' so the compiler will automatically drop it
when it's unused.

This changes the remaining seven platforms to behave the same way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:55:42 +00:00
Arnd Bergmann
7d74a5f076 ARM: 8531/1: turn init_new_context into an inline function
Almost all architectures define init_new_context() as a function,
but on ARM, it's a macro and that causes a compiler warning when
its return code is not used:

drivers/firmware/efi/arm-runtime.c: In function 'efi_virtmap_init':
arch/arm/include/asm/mmu_context.h:88:34: warning: statement with no effect [-Wunused-value]
 #define init_new_context(tsk,mm) 0
drivers/firmware/efi/arm-runtime.c:47:2: note: in expansion of macro 'init_new_context'
  init_new_context(NULL, &efi_mm);

This changes the definition into an inline function, which gcc does
not warn about.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:55:42 +00:00