Commit graph

127,691 commits

Author SHA1 Message Date
Peter Ujfalusi
e327b3f564 Revert "regulator: tps65217: remove tps65217.dtsi file"
This reverts commit 8e6ebfaa9b.

Without the patch reverted regulators will not work. This prevents
MMC to be working for example so the boards can not boot to
MMC rootfs.

Tested it on beaglebone white and bisect also points to the
reverted commit.
The issue can be also fixed by adding "regulator-compatible =" to all board
dts file for the regulators.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-19 09:05:53 -08:00
Linus Torvalds
23300f6575 arm64 fixes:
- Allow EFI stub to use strnlen(), which is required by recent libfdt
 
 - Avoid smp_processor_id() in preempt context during unwinding
 
 - Avoid false Kasan warnings during unwinding
 
 - Ensure early devices are picked up by the IOMMU DMA ops
 
 - Avoid rebuilding the kernel for the 'install' target
 
 - Run fixup handlers for alignment faults on userspace access
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJWxwt3AAoJELescNyEwWM09rIH/3ygrixUcnk/22vI+y32ALDL
 TpBih0pgNmFmls3QxTQaIYqsdjfHVCuzoLRcHGYsPgb42fIeLTgcx6Bp4xacUVGh
 +xjBdEjacUR92TiB/QeP3lNEYIuBhHEPE+H5hHccbdRa+xNB5rUx0Z6nTRokOM4u
 j25KiNf5wO2bOMwo6TNYT0N1Lggp+TZrIP2bIUkWm+RSorF3NGqLS0Rw3ZKwBXxm
 jtUA4ohKR3uyeRHki8Nw/M/AV+gMq+nELX1RGK4HMW00cqakKwIEFvANbdbxGMmg
 q7OIgluSK3BCTQPVQTiss+W6rEjg1z0dTyHGCPVwP16SGXH2i0ys0xQ0BZR5SMw=
 =/uso
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "Here are some more arm64 fixes for 4.5.  This has mostly come from
  Yang Shi, who saw some issues under -rt that also affect mainline.
  The rest of it is pretty small, but still worth having.

  We've got an old issue outstanding with valid_user_regs which will
  likely wait until 4.6 (since it would really benefit from some time in
  -next) and another issue with kasan and idle which should be fixed
  next week.

  Apart from that, pretty quiet here (and still no sign of the THP issue
  reported on s390...)

  Summary:

   - Allow EFI stub to use strnlen(), which is required by recent libfdt

   - Avoid smp_processor_id() in preempt context during unwinding

   - Avoid false Kasan warnings during unwinding

   - Ensure early devices are picked up by the IOMMU DMA ops

   - Avoid rebuilding the kernel for the 'install' target

   - Run fixup handlers for alignment faults on userspace access"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: allow the kernel to handle alignment faults on user accesses
  arm64: kbuild: make "make install" not depend on vmlinux
  arm64: dma-mapping: fix handling of devices registered before arch_initcall
  arm64/efi: Make strnlen() available to the EFI namespace
  arm/arm64: crypto: assure that ECB modes don't require an IV
  arm64: make irq_stack_ptr more robust
  arm64: debug: re-enable irqs before sending breakpoint SIGTRAP
  arm64: disable kasan when accessing frame->fp in unwind_frame
2016-02-19 08:40:05 -08:00
Linus Torvalds
ff5f16820f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
 "Several bug fixes:

   - There are four different stack tracers, and three of them have
     bugs.  For 4.5 the bugs are fixed and we prepare a cleanup patch
     for the next merge window.

   - Three bug fixes for the dasd driver in regard to parallel access
     volumes and the new max_dev_sectors block device queue limit

   - The irq restore optimization needs a fixup for memcpy_real

   - The diagnose trace code has a conflict with lockdep"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: fix performance drop
  s390/maccess: reduce stnsm instructions
  s390/diag: avoid lockdep recursion
  s390/dasd: fix refcount for PAV reassignment
  s390/dasd: prevent incorrect length error under z/VM after PAV changes
  s390: fix DAT off memory access, e.g. on kdump
  s390/oprofile: fix address range for asynchronous stack
  s390/perf_event: fix address range for asynchronous stack
  s390/stacktrace: add save_stack_trace_regs()
  s390/stacktrace: save full stack traces
  s390/stacktrace: add missing end marker
  s390/stacktrace: fix address ranges for asynchronous and panic stack
  s390/stacktrace: fix save_stack_trace_tsk() for current task
2016-02-19 08:33:12 -08:00
Catalin Marinas
70c8abc287 arm64: User die() instead of panic() in do_page_fault()
The former gives better error reporting on unhandled permission faults
(introduced by the UAO patches).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-19 14:28:58 +00:00
Thomas Petazzoni
b3920b2b23 arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
This commit updates the ARCH_MVEBU Kconfig option introduced for
Armada 3700 to also be used for the Armada 7K and 8K platforms, by:

 - Selecting the appropriate clock and irqchip drivers
 - Updating the help text to mention Armada 7K and 8K

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-02-19 14:08:10 +01:00
EunTaik Lee
52d7523d84 arm64: mm: allow the kernel to handle alignment faults on user accesses
Although we don't expect to take alignment faults on access to normal
memory, misbehaving (i.e. buggy) user code can pass MMIO pointers into
system calls, leading to things like get_user accessing device memory.

Rather than OOPS the kernel, allow any exception fixups to run and
return something like -EFAULT back to userspace. This makes the
behaviour more consistent with userspace, even though applications with
access to device mappings can easily cause other issues if they try
hard enough.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Eun Taik Lee <eun.taik.lee@samsung.com>
[will: dropped __kprobes annotation and rewrote commit mesage]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-19 12:20:37 +00:00
Masahiro Yamada
8684fa3e7a arm64: kbuild: make "make install" not depend on vmlinux
For the same reason as commit 19514fc665 ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-19 10:33:35 +00:00
Eddie Huang
3ea064b1e5 ARM64: dts: Mediatek: mt8173-evb: fix access MMC fail issue
MT8173 E1 chip has one bug that if turn off USB power domain, vcore
power will also be off, thus cause modules using vcore power domain
fail, like MMC. The E1 chip only found on MT8173-evb board and this
board only has E1 chip, so implement this as a board specific
workaround.

Pwrapper use vcore power, so add pwrapper using USB power domain to
keep USB power domain not to zero and disabled.

Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-02-19 11:05:09 +01:00
Dinh Nguyen
31d74b2bf0 ARM: socfpga_defconfig: enable support for initramfs/initrd support
Enable CONFIG_BLK_DEV_INITRD.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
2016-02-19 03:48:20 -06:00
Linus Walleij
ff53d12c50 MIPS: txx9: rbtx4938: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:44 +01:00
Linus Walleij
be7658f71e MIPS: txx9: iocled: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:44 +01:00
Linus Walleij
41f6f8ecb7 MIPS: rb532: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:44 +01:00
Linus Walleij
d98312f774 MIPS: txx9: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:44 +01:00
Linus Walleij
f5abf9ee51 MIPS: jz4740: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:43 +01:00
Linus Walleij
6483d82920 MIPS: bcm63xx: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:43 +01:00
Linus Walleij
1b2766fb49 MIPS: ar7: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: linux-mips@linux-mips.org
Cc: Alban Bedel <albeu@free.fr>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:43 +01:00
Linus Walleij
948e0ed86d MIPS: alchemy: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: linux-mips@linux-mips.org
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:43 +01:00
Linus Walleij
ebdbcba0d5 m68k: gpio: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:43 +01:00
Linus Walleij
e0958405bc blackfin: extgpio: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: Sonic Zhang <sonic.zhang@analog.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: adi-buildroot-devel@lists.sourceforge.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:43 +01:00
Linus Walleij
03be35d16e blackfin: gpio: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: Sonic Zhang <sonic.zhang@analog.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: adi-buildroot-devel@lists.sourceforge.net
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:42 +01:00
Linus Walleij
66d718ddaf ARM: plat-orion: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:42 +01:00
Linus Walleij
c788aab7e5 ARM: w90x900: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:42 +01:00
Linus Walleij
985b7f23cb ARM: simpad: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:42 +01:00
Linus Walleij
264af42e92 ARM: s3c24xx: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:42 +01:00
Linus Walleij
010b16d454 ARM: ixp4xx: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:42 +01:00
Linus Walleij
006a7f6ac2 ARM: imx: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:41 +01:00
Linus Walleij
90b9bb81bc ARM: gemini: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:41 +01:00
Linus Walleij
050c542938 ARM: scoop: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: arm@kernel.org
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:41 +01:00
Dirk Behme
4c811edf65 arm64: dts: r8a7795: Add GIC-400 virtual interfaces
Besides the distributor and the CPU interface the GIC-400 additionally
supports the virtual interface control blocks and the virtual CPU interfaces.

Add the physical base addresses and size for these.

See

http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0471b/index.html
-> 3.2. GIC-400 register map

and Linux kernel's

Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt

for more details.

For the at GICH Virtual interface control blocks at 0xf1040000 cover the
whole 128kB (0x20000) range. This is done based on the advice from Marc
Zyngier http://www.spinics.net/lists/arm-kernel/msg483139.html

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:55:33 +09:00
Geert Uytterhoeven
2ee98234b8 arm64: renesas: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains
All supported Renesas ARM64 SoCs have clock and power domains. To ensure
proper operation of on-SoC modules, module clocks must be ungated, and
power domains must be powered up when needed.

Currently the user can choose to build a kernel with power management
enabled or disabled:
  - If CONFIG_PM=y, power domains and/or module clocks are handled
    dynamically by Runtime PM and the generic power domain.
  - If CONFIG_PM=n, power domains are assumed to be powered up by reset
    state or by the boot loader, and module clocks are handled by the
    legacy clock domain on driver (un)bind.
    The latter is implemented using a platform bus notifier, which
    applies not only to all on-SoC devices, but to all platform devices
    present in the system.

To remove the dependency on implicit assumptions, and to get rid of the
peculiarities of the legacy clock domain, enable CONFIG_PM and
CONFIG_PM_GENERIC_DOMAINS unconditionally.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:55:18 +09:00
Magnus Damm
f7e020512e arm64: renesas: Enable RENESAS_IRQC
Select RENESAS_IRQC for Arm64 SoCs from Renesas to enable
build of drivers/irqchip/irq-renesas-irqc.c.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:55:05 +09:00
Sergei Shtylyov
89aac8af1a ARM: dts: r8a7794: add EtherAVB support
Define the generic R8A7794 part of the EtherAVB device node.

Based on the commit 46ece349aa ("ARM: shmobile: r8a7791: add EtherAVB DT
support").

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:54:11 +09:00
Sergei Shtylyov
255a40424e ARM: dts: r8a7794: add EtherAVB clock
Add the EtherAVB clock to the R8A7794 device tree.

Based on the commit eaa870b305 ("ARM: shmobile: r8a7791: add EtherAVB
clock").

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:54:10 +09:00
Geert Uytterhoeven
71d076ceb2 ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains
All supported Renesas ARM SoCs (except for Emma Mobile EV2) have clock
domains. Some SoCs also have power domains. To ensure proper operation
of on-SoC modules, module clocks must be ungated, and power domains must
be powered up when needed.

Currently the user can choose to build a kernel with power management
enabled or disabled:
  - If CONFIG_PM=y, power domains and/or module clocks are handled
    dynamically by Runtime PM and the generic power domain.
  - If CONFIG_PM=n, power domains are assumed to be powered up by reset
    state or by the boot loader, and module clocks are handled by the
    legacy clock domain on driver (un)bind.
    The latter is implemented using a platform bus notifier, which
    applies not only to all on-SoC devices, but to all platform devices
    present in the system.

To remove the dependency on implicit assumptions, and to get rid of the
peculiarities of the legacy clock domain, enable CONFIG_PM and
CONFIG_PM_GENERIC_DOMAINS unconditionally, for all Renesas ARM SoCs with
clock and/or power domains.

This does cause an increase in kernel size.  Given bloat-o-meter reports
a modest increase of 26 KiB for an RZ/A1H kernel, this should not be a
problem, even when used on RZ/A1H with XIP and internal RAM only.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:52:41 +09:00
Simon Horman
c816617e8b ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source property
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.

This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.

Changelog text from a similar patch by Sudeep Holla.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2016-02-19 14:52:23 +09:00
Geert Uytterhoeven
d12a384a1b ARM: dts: r8a7794: Add L2 cache-controller node
Add a device node for the L2 cache, and link the CPU nodes to it.

The L2 cache for the Cortex-A7 CPU cores is 512 KiB large (organized as
64 KiB x 8 ways).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:52:23 +09:00
Geert Uytterhoeven
fdd0dbd8a2 ARM: dts: r8a7793: Add L2 cache-controller node
Add a device node for the L2 cache, and link the CPU node to it.

The L2 cache for the Cortex-A15 CPU cores is 1 MiB large (organized as
64 KiB x 16 ways).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:52:23 +09:00
Geert Uytterhoeven
8ffe93a5b2 ARM: dts: r8a7791: Add L2 cache-controller node
Add a device node for the L2 cache, and link the CPU nodes to it.

The L2 cache for the Cortex-A15 CPU cores is 1 MiB large (organized as
64 KiB x 16 ways).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:52:22 +09:00
Geert Uytterhoeven
fb1cecd406 ARM: dts: r8a7790: Add L2 cache-controller nodes
Add device nodes for the L2 caches, and link the CPU nodes to them.

The L2 cache for the Cortex-A15 CPU cores is 2 MiB large (organized as
128 KiB x 16 ways).

The L2 cache for the Cortex-A7 CPU cores is 512 KiB large (organized as
64 KiB x 8 ways).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:52:22 +09:00
Geert Uytterhoeven
c86a4b6219 ARM: dts: r8a73a4: Add L2 cache-controller nodes
Add device nodes for the L2 caches, and link the CPU node to its L2
cache node.

The L2 cache for the Cortex-A15 CPU cores is 1 MiB large (organized as
64 KiB x 16 ways), and located in PM domain A3SM.

The L2 cache for the Cortex-A7 CPU cores is 512 KiB large (organized as
64 KiB x 8 ways), and located in PM domain A3KM.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:52:21 +09:00
Kuninori Morimoto
57f9156bc6 ARM: dts: r8a7793: enable to use thermal-zone
This patch enables to use thermal-zone on r8a7793.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)

And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifying polling-delay[-passive]
property.

You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reaches to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:52:18 +09:00
Geert Uytterhoeven
c58b31aa46 ARM: shmobile: emev2: Move declaration of emev2_smp_ops to emev2.h
make C=1:

    arch/arm/mach-shmobile/smp-emev2.c:51:29: warning: symbol 'emev2_smp_ops' was not declared. Should it be static?

To fix this, move the forward declaration of emev2_smp_ops to a header
file, and include it where appropriate.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:45:31 +09:00
Geert Uytterhoeven
247ac89b99 ARM: shmobile: emev2: Remove legacy machine_desc.map_io() callback
Commit FIXME ("ARM: shmobile: Consolidate SCU mapping code") removed the
last user of the static mapping on emev2-based systems.  Remove the
mapping and the legacy machine_desc.map_io() callback.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:45:30 +09:00
Geert Uytterhoeven
f5757b9af8 ARM: shmobile: r8a7740: Remove legacy machine_desc.map_io() callback
Commit 37201ba5c99d0be8 ("ARM: shmobile: r8a7740: Migrate to generic l2c
OF initialization") removed the last user of the legacy "IOMEM()" macro
on r8a7740-based systems. Hence there's no longer a need to set up a
transparent mapping of system I/O registers. Remove the mapping and the
legacy machine_desc.map_io() callback.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:45:30 +09:00
Geert Uytterhoeven
c4be044abc ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
Now all r8a7740-based platforms have been migrated to the generic l2c OF
initialization, it's no longer needed to map the L2 cache controller
registers from .map_io().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:45:30 +09:00
Geert Uytterhoeven
4a6cc50151 ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
Migrate the generic r8a7740 platform from calling l2x0_of_init() to the
generic l2c OF initialization.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-19 14:45:29 +09:00
Keerthy
4321dc8dff ARM: AM43XX: hwmod: Add rtc hwmod
The patch registers the rtc hwmod on AM437x chips.  The RTC module is
physically present on the AM438x SoC used on AM43X-EPOS-EVM, but it is
permanently disabled. A secure RTC is used instead on these devices,
where needed. Hence adding it selectively using a separate list to get
RTC Module functional on the other am43x SoCs used on am437x-gp-evm
and am437x-sk-evm.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[paul@pwsan.com: cleaned up patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-02-18 21:46:19 -07:00
Linus Torvalds
705d43dbe1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching fixes from Jiri Kosina:

 - regression (from 4.4) fix for ordering issue, introduced by an
   earlier ftrace change, that broke live patching of modules.

   The fix replaces the ftrace module notifier by direct call in order
   to make the ordering guaranteed and well-defined.  The patch, from
   Jessica Yu, has been acked both by Steven and Rusty

 - error message fix from Miroslav Benes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  ftrace/module: remove ftrace module notifier
  livepatch: change the error message in asm/livepatch.h header files
2016-02-18 16:34:15 -08:00
Hugh Dickins
457a98b080 mm, x86: fix pte_page() crash in gup_pte_range()
Commit 3565fce3a6 ("mm, x86: get_user_pages() for dax mappings") has
moved up the pte_page(pte) in x86's fast gup_pte_range(), for no
discernible reason: put it back where it belongs, after the pte_flags
check and the pfn_valid cross-check.

That may be the cause of the NULL pointer dereference in
gup_pte_range(), seen when vfio called vaddr_get_pfn() when starting a
qemu-kvm based VM.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Michael Long <Harn-Solo@gmx.de>
Tested-by: Michael Long <Harn-Solo@gmx.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-18 16:23:24 -08:00
Ralf Baechle
b61a459fd2 MIPS: jz4740: Fix surviving instance of irq_to_gpio()
This is fallout from commit 832f5dacfa ("MIPS: Remove all the uses of
custom gpio.h").

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
2016-02-19 00:17:24 +01:00