Commit graph

127,691 commits

Author SHA1 Message Date
Dmitry Safonov
6846351052 x86/signal: Add SA_{X32,IA32}_ABI sa_flags
Introduce new flags that defines which ABI to use on creating sigframe.
Those flags kernel will set according to sigaction syscall ABI,
which set handler for the signal being delivered.

So that will drop the dependency on TIF_IA32/TIF_X32 flags on signal deliver.
Those flags will be used only under CONFIG_COMPAT.

Similar way ARM uses sa_flags to differ in which mode deliver signal
for 26-bit applications (look at SA_THIRYTWO).

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: oleg@redhat.com
Cc: linux-mm@kvack.org
Cc: gorcunov@openvz.org
Cc: xemul@virtuozzo.com
Link: http://lkml.kernel.org/r/20160905133308.28234-7-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 21:28:11 +02:00
Dmitry Safonov
cc87324b3d x86/ptrace: Down with test_thread_flag(TIF_IA32)
As the task isn't executing at the moment of {GET,SET}REGS,
return regset that corresponds to code selector, rather than
value of TIF_IA32 flag.
I.e. if we ptrace i386 elf binary that has just changed it's
code selector to __USER_CS, than GET_REGS will return
full x86_64 register set.

Note, that this will work only if application has changed it's CS.
If the application does 32-bit syscall with __USER_CS, ptrace
will still return 64-bit register set. Which might be still confusing
for tools that expect TS_COMPACT to be exposed [1, 2].

So this this change should make PTRACE_GETREGSET more reliable and
this will be another step to drop TIF_{IA32,X32} flags.

[1]: https://sourceforge.net/p/strace/mailman/message/30471411/
[2]: https://lkml.org/lkml/2012/1/18/320

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: oleg@redhat.com
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: Pedro Alves <palves@redhat.com>
Cc: gorcunov@openvz.org
Cc: xemul@virtuozzo.com
Link: http://lkml.kernel.org/r/20160905133308.28234-6-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 21:28:11 +02:00
Dmitry Safonov
90954e7b94 x86/coredump: Use pr_reg size, rather that TIF_IA32 flag
Killed PR_REG_SIZE and PR_REG_PTR macro as we can get regset size
from regset view.
I wish I could also kill PRSTATUS_SIZE nicely.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: gorcunov@openvz.org
Cc: xemul@virtuozzo.com
Link: http://lkml.kernel.org/r/20160905133308.28234-5-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 21:28:10 +02:00
Dmitry Safonov
2eefd87896 x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*
Add API to change vdso blob type with arch_prctl.
As this is usefull only by needs of CRIU, expose
this interface under CONFIG_CHECKPOINT_RESTORE.

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: oleg@redhat.com
Cc: linux-mm@kvack.org
Cc: gorcunov@openvz.org
Cc: xemul@virtuozzo.com
Link: http://lkml.kernel.org/r/20160905133308.28234-4-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 21:28:09 +02:00
Dmitry Safonov
576ebfefd3 x86/vdso: Replace calculate_addr in map_vdso() with addr
That will allow to specify address where to map vDSO blob.
For the randomized vDSO mappings introduce map_vdso_randomized()
which will simplify calls to map_vdso.

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: oleg@redhat.com
Cc: linux-mm@kvack.org
Cc: gorcunov@openvz.org
Cc: xemul@virtuozzo.com
Link: http://lkml.kernel.org/r/20160905133308.28234-3-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 21:28:09 +02:00
Dmitry Safonov
e38447ee1f x86/vdso: Unmap vdso blob on vvar mapping failure
If remapping of vDSO blob failed on vvar mapping,
we need to unmap previously mapped vDSO blob.

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: oleg@redhat.com
Cc: linux-mm@kvack.org
Cc: gorcunov@openvz.org
Cc: xemul@virtuozzo.com
Link: http://lkml.kernel.org/r/20160905133308.28234-2-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 21:28:08 +02:00
H. Nikolaus Schaller
3868b42f36 ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
This helps to get 100% intensity closer to "always on".

It compensates for an effect of dmtimer which at 100% still emits short
"off" impulses and the startup-time of the DC/DC converter makes
backlight intensity not reach full scale. The lower the PWM frequency
is, the smaller is this effect.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14 11:12:16 -07:00
Martin Blumenstingl
566603e5e6 ARM64: dts: meson-gxbb: add USB Nodes
Add the nodes for the dwc2 USB controller and the related USB PHYs.
Currently we force usb0 to host mode because OTG is currently not
working in our PHY driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:48:41 -07:00
Jerome Brunet
cb700f4935 ARM64: dts: gxbb: add i2c bus
Add nodes for i2c bus on gxbb based platforms.
On the OdroidC2 (I2C A) and P200 (I2C B), the pull-up resistor are
present directly on the board. This indicates that these pins are
dedicated to i2c.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:48:36 -07:00
Neil Armstrong
1befc626c1 ARM64: dts: meson-gxbb: add I2C nodes
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:48:32 -07:00
Jerome Brunet
8c04d7950a ARM64: dts: meson-gxbb: add pins for I2C
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:48:27 -07:00
Neil Armstrong
e9c9b651a3 ARM64: dts: meson-gxbb: Add SPIFC node
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:48:21 -07:00
Neil Armstrong
2d7ed3df44 ARM64: dts: meson-gxbb: add the SDIO pins
This is used to configure the pins of the sd_emmc_a controller to
which an SDIO module is connected (when available).

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:48:10 -07:00
Jerome Brunet
c74b5ecfe3 ARM64: dts: amlogic: add spi nor pins
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:48:05 -07:00
Martin Blumenstingl
42bede64c8 ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver
The Amlogic reference driver uses the "mc_val" devicetree property to
configure the PRG_ETHERNET_ADDR0 register. Unfortunately it uses magic
values for this configuration.
According to the datasheet the PRG_ETHERNET_ADDR0 register is at address
0xc8834108. However, the reference driver uses 0xc8834540 instead.
According to my tests, the value from the reference driver is correct.

No changes are required to the board dts files because the only
required configuration option is the phy-mode, which had to be
configured correctly before as well.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:47:52 -07:00
Neil Armstrong
8f14a89305 ARM64: dts: meson-gxbb: Add Meson GXBB PWM Controller nodes
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jérôme Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:47:47 -07:00
Neil Armstrong
7b5682c64b ARM64: dts: meson-gxbb: Add Meson MHU Node
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:47:42 -07:00
Martin Blumenstingl
f59063aee2 ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices
All of these have a Realtek Gbit RGMII PHY.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 10:47:32 -07:00
Linus Torvalds
77e5bdf9f7 Merge branch 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess fixes from Al Viro:
 "Fixes for broken uaccess primitives - mostly lack of proper zeroing
  in copy_from_user()/get_user()/__get_user(), but for several
  architectures there's more (broken clear_user() on frv and
  strncpy_from_user() on hexagon)"

* 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
  avr32: fix copy_from_user()
  microblaze: fix __get_user()
  microblaze: fix copy_from_user()
  m32r: fix __get_user()
  blackfin: fix copy_from_user()
  sparc32: fix copy_from_user()
  sh: fix copy_from_user()
  sh64: failing __get_user() should zero
  score: fix copy_from_user() and friends
  score: fix __get_user/get_user
  s390: get_user() should zero on failure
  ppc32: fix copy_from_user()
  parisc: fix copy_from_user()
  openrisc: fix copy_from_user()
  nios2: fix __get_user()
  nios2: copy_from_user() should zero the tail of destination
  mn10300: copy_from_user() should zero on access_ok() failure...
  mn10300: failing __get_user() and get_user() should zero
  mips: copy_from_user() must zero the destination on access_ok() failure
  ARC: uaccess: get_user to zero out dest in cause of fault
  ...
2016-09-14 09:35:05 -07:00
Arnd Bergmann
bac6dd36e3 This is a bunch of Integrator changes for v4.9:
- Add and fix a bunch of clocks in the DTS corresponding
   to the new clock support merged into the clk tree.
 - Move the CLCD display configuration from boardfile to
   device tree using the new CLCD support merged into the
   fbdev tree.
 - Cut some auxdata.
 - Cut some static remappings.
 - Move the sched_clock() counter to use syscon+regmap.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXxogwAAoJEEEQszewGV1z2WoQAIpNj8akj2qHWfaZKUa5HTVH
 YN2ukEkhpY8qXDw8ZjQVGMQ2VrHUCFWkwcYat8RPe7yfeZcEEkFMTgfTkq9h3P3g
 15a+a4PuX2Prli/gzH3gq9VayHBOrUe+YAiy6qRbtVM6K7qwd9fBDWGYUBgC4i9p
 7Y8lsyNTXXthtOnajlYVAxfFGTq67F2kZjHiCEagsWB6aLfT5Ixi/ZmCTs/GTfEf
 Lon7XG8RQFo/3xatM/k4kjv/Bd8GzIW8UR/iZ5qnEOBIbcFSBWey9N0saiagZ8M1
 vMmYjClMlunvX8L22EoC8ZOHcfF+YFeKpqbKehDmobY5qdi40yTse0CoVcFPaX7o
 JZWZThOirsEb6q0iFH/Imno8dGWnWRG++h3ONx4KYbyJ8dOxJOwjbGtM23iT+SbF
 JnceDpQ/oo5D84UEZhdonY0bemhkKhd9TADHlg0IHPo94dtD2VCsZalfLk7RyDyx
 9fOZFBZv5y8khh9nX5BhBkDexw0LXXmSyzrkjVOKsuImsBaLFueZe8kTDHFHbRCm
 MjYwLGRdmQIBCubdbjj1lxWk+xVDtvSonrT57a/A3+luAJutGbOdAeCUGtF3IzIY
 uSgGVaExxD+ax/E9dWP6N1kPvBAtB7+jqQXOsX6kO39irFxoUBE6OhdyT4RsrSEN
 J1FRkiDG5EH1rXiVpD8h
 =kkO1
 -----END PGP SIGNATURE-----

Merge tag 'integrator-armsoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/late

Pull "This is a bunch of Integrator changes for v4.9" Linus Walleij:

- Add and fix a bunch of clocks in the DTS corresponding
  to the new clock support merged into the clk tree.
- Move the CLCD display configuration from boardfile to
  device tree using the new CLCD support merged into the
  fbdev tree.
- Cut some auxdata.
- Cut some static remappings.
- Move the sched_clock() counter to use syscon+regmap.

* tag 'integrator-armsoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: integrator: read counter using syscon/regmap
  ARM: integrator: cut down on static maps
  ARM: integrator: delete some auxdata
  ARM: integrator: move CP CLCD display to DTS
  ARM: dts: add the core module clocks to Integrator/CP
  ARM: dts: Add the core module clocks to Integrator/AP
  ARM: dts: add the Integrator/AP baseboard clocks
  ARM: dts: set the 24MHz xtal as parent of the UART clock
2016-09-14 17:55:26 +02:00
Arnd Bergmann
78dc6663a8 arm64: Xilinx ZynqMP dt patches for v4.9
- Fix gic ranges property
 - Use 64bit size cells format
 - Add PCIe node
 - Correct pmu and watchdog nodes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAle24TYACgkQykllyylKDCHRQQCbBd1XdhPR6lxk4AxPLbbfEvaQ
 rHQAnjM3n2yuyc0Mlqsva7/VaWHtSsZ5
 =eOIL
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-dt-for-4.9' of https://github.com/Xilinx/linux-xlnx into next/dt64

Pull "arm64: Xilinx ZynqMP dt patches for v4.9" from Michal Simek:

- Fix gic ranges property
- Use 64bit size cells format
- Add PCIe node
- Correct pmu and watchdog nodes

* tag 'zynqmp-dt-for-4.9' of https://github.com/Xilinx/linux-xlnx:
  ARM64: zynqmp: Correct the watchdog timer interrupt number
  ARM64: zynqmp: Add missing interrupt-parent to PMU node
  ARM64: zynqmp: Add PCIe node
  ARM64: zynqmp: Use 64bit size cell format
  ARM64: zynqmp: Align gic ranges for 64k in device tree
2016-09-14 17:44:12 +02:00
Linus Torvalds
b8f26e880c xen: regression fix for 4.8-rc6
- Fix SMP boot in arm guests.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJX2VU5AAoJEFxbo/MsZsTR9LYIAI5VUqMXq2eeItorp2XZfZ24
 t5X+Noob+6NwiCWML2LvLVuoyPhsg1ADbOGRR08SkWWThxOtzrNaB1IvudKMxZ9Q
 c6BxxTVcAQ3lvs2PxvS0s3UI/GeF1yuolpdmNkoOkCc3hoNJ4H8J5RDJguEJzkWy
 OVFiMCkpTbQoJ/kAzlOVoBYV5BuSlEzc86fmS1wmdqmLC/YEAc9mnEB12Qjo8w6u
 IQ/lH9p5GXhLco0NrowxfxsNT0bIj8keaA1WozkDT8i4KFcFE4pw0i96Szdrraou
 hr3tZidPOMWxBEEDTY13Xp9+4RSZmVlVJfCc87jO71Jknk0dyfboGcic7362Mvo=
 =V1SL
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.8b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen regression fix from David Vrabel:
 "Fix SMP boot in arm guests"

* tag 'for-linus-4.8b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: fix SMP guests boot
2016-09-14 08:42:51 -07:00
Arnd Bergmann
da9070b35c Renesas ARM64 Based SoC DT Updates for v4.9
Clean up:
 * Remove unnecessary cap-mmc-highspeed property from SDHI nodes on r8a7795 SoC
 * Add SoC-specific compatible property to audio-dmac nodes on r8a7795 SoC
 
 New Board:
 * Add r8a7794/h3ulcb board
 
 Enablement:
 * Add PFC and GPIO to r8a7796 SoC
 * Enable DU and USB 2.0 on r8a7795/salvator-x board
 * Add VTP, FCPV, FCPF and FDP1 to r8a7795 SoC
 * Set maximum frequency for SDHI clocks on r8a7795 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX0RWZAAoJENfPZGlqN0++Ke4P/3e/vy1wOAIgqWTbsc3mlmXw
 3gOgJ5EZ+jkNTMiMGFPjmwTr3W+TABFtIDgERrhY/PC15eYLoPFmmTktDWeycLvF
 Rk+AkXJ8ijXpHB7J5HGT2ZJB3pWsPSoQ5iEJI53BJ084sfDJ38hn1Ew41v442j91
 W5FbWsjoKbouPnPsYPDRrOclEUvUoSZPY1ouY9ywfW1zijCvjiwlZ2xRa/df5mnv
 w8VGqhP1bD10LTfcyVGZ0YcHH8noSazoNrz8ZUct9ECwjwPJOHelj+3fKAkuEzPa
 R4GTNRhnlVR560Uk7yG9LdoB39JqE/D8rUOaLkzwFBcOuO8g+vTOV6E4wbX/0LWH
 J5YuMH78+wD6wNj7ON4saiT5SjkGCPkd12bTXrBA14gxCCYQTp/d9r4sGaykRDYO
 5NX4IRg/hbilgDMQxXLZkA5s9QRjFXe/4EIol8hF4zHU2RRKaMjMxpWOfLjKBXRQ
 wLrzitWtaMrrL0SLlUmKQ17TpfursVmaDU0S4F8VtPXfe8EdU52WWuN9u+e1vI9R
 lYwek8kq89aJqI06/N+gINCCWHKv2mbYJwcOIFIghvHub8ZBHzeoCx1SVN0W143P
 Cg6zJUgjvM0+OGTK3Q8IcVq/S60e/hN+ASJaHS/HJy+bQbSj/SkqAeyP1WomjQwp
 kX6RwdwpYxKATWr25xCa
 =Vd0J
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-dt-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late

Pull "Renesas ARM64 Based SoC DT Updates for v4.9" from Simon Horman:

Clean up:
* Remove unnecessary cap-mmc-highspeed property from SDHI nodes on r8a7795 SoC
* Add SoC-specific compatible property to audio-dmac nodes on r8a7795 SoC

New Board:
* Add r8a7794/h3ulcb board

Enablement:
* Add PFC and GPIO to r8a7796 SoC
* Enable DU and USB 2.0 on r8a7795/salvator-x board
* Add VTP, FCPV, FCPF and FDP1 to r8a7795 SoC
* Set maximum frequency for SDHI clocks on r8a7795 SoC

* tag 'renesas-arm64-dt-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (43 commits)
  arm64: dts: r8a7796: Add GPIO device nodes
  arm64: dts: r8a7796: salvator-x: add serial console pins
  arm64: dts: r8a7796: Add pinctrl device node
  arm64: dts: r8a7795: salvator-x: Configure pins for the DU RGB output
  arm64: dts: h3ulcb: enable GPIO leds
  arm64: dts: h3ulcb: Sound SSI support
  arm64: dts: h3ulcb: enable SDHI0
  arm64: dts: h3ulcb: enable GPIO keys
  arm64: dts: r8a7795: remove unnecessary cap-mmc-highspeed property
  arm64: dts: h3ulcb: enable USB2.0 Host channel 1
  arm64: dts: h3ulcb: enable USB2 PHY of channel 1
  arm64: dts: h3ulcb: enable WDT
  arm64: dts: h3ulcb: enable EXTALR clk
  arm64: dts: h3ulcb: enable I2C2
  arm64: dts: h3ulcb: enable EthernetAVB
  arm64: dts: h3ulcb: enable SCIF clk and pins
  arm64: dts: h3ulcb: initial device tree
  arm64: dts: h3ulcb: add H3ULCB board DT bindings
  arm64: dts: r8a7795: Add SoC-specific compatible property to audio-dmac nodes
  arm64: dts: r8a7795: renesas: salvator-x: Enable DU
  ...
2016-09-14 17:42:12 +02:00
Arnd Bergmann
e08644b0c7 Amlogic 64-bit DT changes for v4.9
- add watchdog, reset, IR remote, PWM
 - add secure monitor and eFuse
 - add always-on (AO) domain clock and reset
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXyhPZAAoJEFk3GJrT+8ZlIQkP/1Xyb2A483CPDL4JZP/BHDjd
 DXLpjTeiL7JVtfCdjRNFL1mOMEwtbhjuwklRsBaHIGGHg8TK26RJAdxzmRPtZ2fd
 U8wLrSRCdesF6bwI4j8zomm2tAD3a0Ujik21AROKZj1pWh/n9k0m+CrPgwBCZoA9
 yM1/usSP0Gm0kLWgH1mwVjGJOgf7Xi6TGHBsNyy1zl+Jj4uTf+aB6auHygemznvi
 cANjibsOFY+KvcE19/y/yGJL7nFeln9C6TE1igDh2m/e+FR0+Ng3p1qtZxb2jsnv
 TOFROdTyEjPN9tmJQxoJfjpY2PUXE1rKezGnJBVBtpCijvSVl39goDvobUajFJ67
 g5O483kwsjEqx7uOvl4WU/kFqw2HunpILSR5QuJJ15n9kxVN+tNeAjIxo/dG7wgD
 8Byeu5FGa2va6YNEkQF7UGagKIgIloG1N59OkFwLWwMem/xtd1nuiSoLlyuw82/C
 EXu9N2I9UbOA3s6sEEJBazvtk+ueHaENwIFLo5yPDOLCKmt8/ii4dV4QWzn9R7Zy
 d2NZpNjPj/eBRDC6O+MgJVAEuikjvfn9tUcuVQGjJ+pq3mtpAxzdclVHMYlKclON
 /ykQqRZPE33CDRBdp5TCbJp/UMyXyjhdhcaAaY7yYPpjkEjFEaLWTMH7wua04754
 K57RdpXb1kQG7qGAy9xF
 =UZHB
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic 64-bit DT changes for v4.9" from Kevin Hilman:

- add watchdog, reset, IR remote, PWM
- add secure monitor and eFuse
- add always-on (AO) domain clock and reset

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: amlogic: gxbb: Enable NVMEM
  documentation: Add nvmem bindings documentation
  ARM64: dts: amlogic: gxbb: Enable secure monitor
  documentation: Add secure monitor bindings documentation
  ARM64: dts: meson-gxbb: Add PWM pinctrl nodes
  ARM64: dts: meson-gxbb: Enable the the IR decoder on supported boards
  ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder
  dt-bindings: media: meson-ir: Add Meson8b and GXBB compatible strings
  ARM64: dts: amlogic: add the input pin for the IR remote
  ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node
  clk: meson: Fix invalid use of sizeof in gxbb_aoclkc_probe()
  clk: meson: Add GXBB AO Clock and Reset controller driver
  dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
  ARM64: DTS: meson-gxbb: switch ethernet to real clock
  ARM64: dts: amlogic: meson-gxbb: Add watchdog node
2016-09-14 17:34:35 +02:00
Arnd Bergmann
2e1762c30f - add HDMI related nodes to mt8173
- enable the HDMI output on mt8173-evb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJX1ssKAAoJELQ5Ylss8dND95sQAJgirPzd8k4VSQ8V6YYf9Ulr
 B3C/hy7gSZwwUlJ5kTh7Dp6IGqZqSdPcsj2kA6UYkJVRJHJ2Ji3kAqxEJGIZVBZL
 0XowoPnOztFaW0TrHeoDHBH8Ly8gT71VS9YRNqvHWzLR6XBj4qBP4CJzbvoeHriw
 9IiXq0MZ3/ii8RQ8pMSQFCE3kBfl9bL2YXIlnCC4jOA5892/kqETkLT1THyUDSTf
 PIAPYa1iIp/8GqM3BiJtji2bSc7aYEpRKiEtAziv5JAb4Ltbq75u+9YOOH8CU5BR
 maB/freg4UCLNl6jOiFxsBVPpdoUxHftcus67Q454ZKznKCgM3KDt/achNcV3BTU
 6Wj9oXGFVU/luKGVfYpyd2qD/7+ajmGlh0PRrag5AZ9+A/2a0LYvrYqHfedGwQU/
 qEQwRKxo6pphUxoWnXrx29A+H+V2w2coXI5FRa7JBpWkUR8UNyxuR+la2f5hWsOq
 N3mVc7idtoEvKGpdEd8NQ41Vj0GYfs9RxkARbwdLl+OI7v4SDEuB4bBaVh8WRrCR
 BCyy7LukSBMiivrCWCBScUa7i8Lo2o3tB7vq4cEr2emnX74LGFKr/TSFsvK8xS5I
 QNkgdWIERir0dTyNWjWAqRq+WWMINgQZizbSvJ05L2nqZlxN2r9UeY6um9JlQKD8
 LwCfHWMB9jNg7o3+XXyc
 =cx5v
 -----END PGP SIGNATURE-----

Merge tag 'v4.8-next-dts64' of https://github.com/mbgg/linux-mediatek into next/dt64

Pull "ARM: mediatek: dts64 updates for v4.9" from Matthias Brugger:

- add HDMI related nodes to mt8173
- enable the HDMI output on mt8173-evb

* tag 'v4.8-next-dts64' of https://github.com/mbgg/linux-mediatek:
  arm64: dts: mt8173-evb: enable HDMI output
  arm64: dts: mt8173: Add HDMI related nodes
2016-09-14 17:31:58 +02:00
Arnd Bergmann
3402a63d8d i.MX arm64 device tree changes for 4.9:
- Add property dma-coherent for ls2080a PCI device to save software
    cache maintenance.
  - Update serial aliases and use stdout-path to sepecify console for
    ls2080a and ls1043a boards.
  - Add DDR memory controller device node for ls2080a and ls1043a SoCs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJX1lq1AAoJEFBXWFqHsHzOxA0H/3kkDhBMthlIkFk9BIEytFta
 O1U2f6pjjQg+YJIrhZLronqlp3o/cnkhEe16un/cBWk2mBSMbrt9/Mg5CJeUhz/I
 AcNAbwwoY0qRgYSgbEoFpZu6AKe8rjrKapPoOGgAWSVBBmPhM448l56PfVz2+DMT
 PgTqEkl+flH3ed7DhdL7NLhyYZQ5OanwjAk8K53tDIHSt8OP5ttxbXDNZxv0kUpI
 WLyqJkKpLyJm46H4tSjar5XtRSPf12+lz9sLOMdodEodxdofjIFiXHlNDEIwG0Xo
 NRYO4wAAWy+4D8VehAkCc64ZUOk5qBbpGZVWTNHjvanvQ1WLON7uroh3xAqZAsE=
 =cOOP
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64

Pull "i.MX arm64 device tree changes for 4.9" from Shawn Guo:
 - Add property dma-coherent for ls2080a PCI device to save software
   cache maintenance.
 - Update serial aliases and use stdout-path to sepecify console for
   ls2080a and ls1043a boards.
 - Add DDR memory controller device node for ls2080a and ls1043a SoCs.

* tag 'imx-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ls2080a: Add 'dma-coherent' for ls2080a PCI nodes
  arm64: dts: add stdout-path to chosen node for ls2080a/ls1043a boards
  arm64: dts: updates serial aliases for ls1043a rdb and qds boards
  arm64: dts: Add DDR memory controller for Layerscape SoCs
2016-09-14 17:28:21 +02:00
Arnd Bergmann
736ad004f8 arm64: tegra: Device tree changes for v4.9-rc1
Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on
 Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads
 with the DPAUX to be used to access various audio devices. Furthermore,
 enable the XUSB controller on Smaug for USB 3.0 support.
 
 Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure
 devices are probed only after their power partitions have been enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJX0tItExx0cmVkaW5nQG52aWRpYS5jb20ACgkQ3SOs138+s6Em
 MRAAk1aMxkF0C3As4MDVK9F0fZpSgC6bUJE4d4HXEp6wklIgM8FPC4zPiBEGrkC/
 hGeDjCPNdyloE/Uv2FYIQMOBlQRSHYvFR928syTgAIpdTIVL9JDuMSSkWQM+x6Io
 E9+ydyVVDTqZHlkSP24uRIuWlLLjYg5hgT4jV8PsrVhitxzj9x9cuV+qP/mhIV94
 pnizwuGAZ1dzFFAbkJk66a5mcO3aTIRqzLd5HnfCwx7DGHyl62jmdeY90xxivndC
 VoF8Ez8dWQYKl1UtL3g2Ia3KqKfr+XbBJGmxa4JkEENm06f9XQrdwZNfqWRcDFrl
 LdpcdVp5Jnq9YBmoBOXm25+gIhF0h5Hk7at1/X8CZ3X6TuRhtEhdxJbvZZT2syKF
 55WvdV6jqZrAqxInNgLuvikQzWpIJ08JD6KeTo2umxB1MGZcXkxiarHVZRnIBUni
 qOcVAA4WEmJh4C3Hc0WKPFgqagbAnIqW1sPzxycqjBufd3TEqykuyXVHlTnZYZB7
 dZIyWRXgOoRbCD2Xx1lVe6Vimq0XeUYqWf6y6iqf7bHaFzUMuhWnRQDiPGFn3qkO
 7lc/fb+odhKeXMtFhVJ5m1RxObWExVle0N3ThmUOlyM1dWxxdVkwwodP+/Id/+Bt
 E5NQiCUTrcGz1E8zEJJxcr6MqnJYeAnrXK28Hshj/DCeKiw=
 =RrBi
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64

Pull "arm64: tegra: Device tree changes for v4.9-rc1" from Thierry Reding:

Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on
Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads
with the DPAUX to be used to access various audio devices. Furthermore,
enable the XUSB controller on Smaug for USB 3.0 support.

Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure
devices are probed only after their power partitions have been enabled.

* tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Select PM_GENERIC_DOMAINS
  arm64: tegra: Enable XUSB controller on Tegra210 Smaug
  arm64: tegra: Add the various audio devices for Tegra210 Smaug
  arm64: tegra: Enable DPAUX for Tegra210 Smaug
  arm64: tegra: Add ACONNECT, ADMA and AGIC nodes Tegra210 Smaug
  arm64: tegra: Add SOR power-domain for Tegra210
  arm64: tegra: Add ADMA node for Tegra210
  arm64: tegra: Add AGIC node for Tegra210
  arm64: tegra: Drop clock and reset names for XUSB powergates
  arm64: tegra: Simplify Tegra210 GPIO compatible value
2016-09-14 17:26:34 +02:00
Arnd Bergmann
291e287b97 Merge tag 'v4.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Pull "Rockchip dts64 changes for 4.9" from Heiko Stübner:

64bit Rockchip devicetree changes containing support for the recently
added firmware reboot-flag support, one new board the Tronsmart Orion
based on the rk3368 and a large number of newly supported peripherals
for the rk3399 (type-c phy, usb2 phy, pcie controller and pcie phy,
gmac, arm-pmu using ppi partitioning, efuse, saradc) as well as some
smaller housekeeping and non-critical fixes.

* tag 'v4.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
  arm64: dts: rockchip: add Type-C phy for RK3399
  arm64: dts: rockchip: enable the gmac for rk3399 evb board
  arm64: dts: rockchip: add the gmac needed node for rk3399
  arm64: dts: rockchip: support the pmu node for rk3399
  arm64: dts: rockchip: change all interrupts cells to 4 on rk3399 SoCs
  arm64: dts: rockchip: add the tcpc for rk3399 power domain
  arm64: dts: rockchip: add efuse0 device node for rk3399
  arm64: dts: rockchip: configure PCIe support for rk3399-evb
  arm64: dts: rockchip: add the PCIe controller support for RK3399
  arm64: dts: rockchip: add the PCIe PHY for RK3399
  arm64: dts: rockchip: add the gmac power domain on rk3399
  arm64: dts: rockchip: Add pinctrl entry for 32k clock on rk3399
  arm64: dts: rockchip: set to CCI clock of RK3399 to 600M
  arm64: dts: rockchip: fix the address map for WDT0 and WDT1
  arm64: dts: rockchip: add the saradc for rk3399
  arm64: dts: rockchip: configure usb2-phy support for rk3399-evb
  arm64: dts: rockchip: add usb2-phy support for rk3399
  arm64: dts: rockchip: add syscon-reboot-mode DT node
  soc: rockchip: add reboot-mode header
  arm64: dts: rockchip: remove broken-cd from sdio0
  ...
2016-09-14 17:25:32 +02:00
Josh Poimboeuf
cfeeed279d x86/dumpstack: Allow preemption in show_stack_log_lvl() and dump_trace()
show_stack_log_lvl() and dump_trace() are already preemption safe:

- If they're running in irq or exception context, preemption is already
  disabled and the percpu stack pointers can be trusted.

- If they're running with preemption enabled, they must be running on
  the task stack anyway, so it doesn't matter if they're comparing the
  stack pointer against a percpu stack pointer from this CPU or another
  one: either way it won't match.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a0ca0b1044eca97d4f0ec7c1619cf80b3b65560d.1473371307.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-14 17:23:30 +02:00
Arnd Bergmann
3073be6c29 This pull request contains Broadcom ARM64-based SoC Device Tree changes for
v4.9, please pull the folllowing:
 
 - Dhanajay adds the PWM Device Tree nodes to the Northstar 2 DTS files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXz3QwAAoJEIfQlpxEBwcEBgkP/1Ne9OcgX6Y2j7ZNJxn5fGQ7
 DjvqvxP8H5m2uJ4h/bFnMFtxeQja0buemkJO/HEULHzZ9bw5xsV4ANRQeTiOWPSY
 hjEXR0Ukt6+aW6lCDc0dN32QnZSi/ljh6k3rWnNk1vaj8to0D/hGeC3twOxV7y7T
 zHpqyqzL2HggUWrr+nM30zC6KfDGaH2EFqkFrzVM6YFnZ49NaRxTs8K8JbovYuTe
 5KTM8IG67tmVtriP3hSbj83d1Ozld7PvMG57CxsxX9e7lqZnYpwUGVhoT76527R/
 CdMlPVgnOrCCyq+pG++Va1i7kuoQ70+FQ6F/WeWAT6Nnh/3PqF+6tpygfhQ+yD7B
 qSv/5OILR80HxAaJlWTMITydLeYlaRCbYI7dwcsyYLNC2jybnSRlTl+lNCBAHo5K
 AK7Xoi+XWIUhKLqD2ewyN8X9/P/33eGx/Y2D1WbuI7A/TOkF0+nCnYdeLmzB7i6s
 V57piQh5XREbImlL4BwlMUjkRkNNIon0lbyp4SHBchFA+Jn/GkF+qF1qmFy+BwIa
 ujJStbTT+dXdBPqXdM46AMkYP3//3Y2hAMwhluJcZfTdqdB3/QWxA6Sw3n4uWUN0
 b8FVEMD1g9sEjEo6AIWFOPCEFoMl0ffhOuQI8x1VgKa+jxD/DzQcymzwtEGg6hpl
 emPZ3qDQw9RsLaVDUS/D
 =Gedm
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.9/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64

Pull "Broadcom devicetree-arm64 changes for 4.9" from Florian Fainelli:

This pull request contains Broadcom ARM64-based SoC Device Tree changes for
v4.9, please pull the folllowing:

- Dhanajay adds the PWM Device Tree nodes to the Northstar 2 DTS files

* tag 'arm-soc/for-4.9/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: Add PWM DT node for NS2
2016-09-14 17:17:53 +02:00
Arnd Bergmann
ddee928d8f mvebu dt64 for 4.9 (part 1)
- add description for the new Armada 8040 dev board
 - add the PIC and PMU on Armada 7K/8K
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlfMQ9EACgkQCwYYjhRyO9UmVwCfZs5WQiOtUhnAc8xc1s1ac+AD
 tcoAoKnlIFxvt1QIGqxjfzk3tPtEAj0a
 =XbJ5
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt64-4.9-1' of git://git.infradead.org/linux-mvebu into next/dt64

Pull "mvebu dt64 for 4.9 (part 1)" from Gregory CLEMENT:

- add description for the new Armada 8040 dev board
- add the PIC and PMU on Armada 7K/8K

* tag 'mvebu-dt64-4.9-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: describe the PIC and PMU on Armada 7K/8K
  arm64: dts: marvell: add description for the Armada 8040 dev board
  arm64: dts: marvell: add description for the slave CP110 in Armada 8K
2016-09-14 17:10:35 +02:00
Arnd Bergmann
bd3af15a4e Qualcomm ARM64 Updates for v4.9
* Updates for MSM8916 including TSCR, SMSM/SMP2P, and MBA reserve
 * Update SCM node to denote being a reset-controller
 * Fix broken interrupt settings
 * Add TSENS nodes for MSM8916/MSM8996
 * Add DB820c support
 * Add MSM8916/APQ8016 display support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXycq8AAoJEFKiBbHx2RXVNsMQAK7/ATfXQmtOlw8i3gKsweHn
 XV8JLVnS+2NBL+vV3/5js/77weOtZZXPaVjYh+OY+UOtDl+yGGuizST3nRa2Ha05
 P0yiND5S1YmYLyQkCDn35LHBSeeFJUTWQ7ugcgKfPNazXpZBX73JXwr6VXJHD/M0
 LrE1tmcq7/cNm1b81+6MlgwTJPxf5OmXwcrMh7oIrXU1iU8jTlU1QB0P5fBJSfFt
 6k5+x354PBTD+lWhRZ50b8mnLr/ylJWGR4ZSiHDPqEY7VHYVldF41zZseQ+Nv70o
 2LDpUoBWEK0kdbqxWQiqKiheKHVgS0qKorMLyxEtjEnf24XY4xYzipjIZcZmwpYO
 zbh6MtR6P/KWv3hJHNS02hMJGCs0dkhArp8VFbI0CjGlngt0J9qZRsIFg1h/MPf4
 kUfrslQ1vtQwV4JZ38yTxRkdb2Tcr5ZFB8RGuuv3q0tapkHjGRmkYo1Z69/P8ftt
 OMMTR7u2jnOm/C8s2F51gOEfhjplax1RGcZqEWtxIW6TzkNXsfDpZmCdz9yf4jqI
 QAf8xS9N/OrwrJ36cQ9ElnmVPagQqt0fBx2VqcVoGh815Bw5DLWzr2jqCXtEONOF
 JZT+JTkjrtFcM/XsxT6u9QKWdh1qEJXQOa191hFFdEvPkYMmBzQTU3qELI8NQrHa
 r6aazwMpsk4hOjeNGVi1
 =O4O+
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Pull "Qualcomm ARM64 Updates for v4.9" from Andy Gross:

* Updates for MSM8916 including TSCR, SMSM/SMP2P, and MBA reserve
* Update SCM node to denote being a reset-controller
* Fix broken interrupt settings
* Add TSENS nodes for MSM8916/MSM8996
* Add DB820c support
* Add MSM8916/APQ8016 display support

* tag 'qcom-arm64-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: apq8016-sbc: Add HDMI display support
  arm64: dts: msm8916: Add display support
  arm64: dts: db820c: add support to external sd card.
  arm64: dts: db820c: add support to SPI on HS
  arm64: dts: db820c: add support to LS-SPI0
  arm64: dts: db820c: add support to I2C on HS
  arm64: dts: db820c: add support to LS-I2C1
  arm64: dts: db820c: add support to LS-I2C0
  arm64: dts: db820c: add support to LS-UART0
  arm64: dts: db820c: add basic board support
  arm64: dts: msm8996: Add thermal zones, tsens and qfprom nodes
  arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
  arm64: dts: qcom: Fix broken interrupt trigger settings
  arm64: dts: qcom: msm8916: Add tcsr syscon
  arm64: dts: qcom: msm8916: Make scm a reset-controller
  arm64: dts: qcom: msm8916: Add mba memory reserve
  arm64: dts: qcom: msm8916: Add smsm and smp2p nodes
2016-09-14 17:07:38 +02:00
Arnd Bergmann
5661beb338 ARM64: DT: Hisilicon SoC DT updates for 4.9
- Set UART1 clock frequency to 150MHz for higher baud rates on hikey
 - Add display subsystem, HDMI and cma nodes on hikey to support display
 - Add syscon-reboot-mode support on hikey
 - Add pstore support on hikey
 - Add resets and sd-uhs-sdr property dwmmc ndoe on hikey
 - Remove hip05_hns.dtsi since it can not be built without mbigenv1
 - Update system controller bingding document for hip05 and hip06
 - Add xge and sas support on hip06
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXyU46AAoJEAvIV27ZiWZcHzgP/i1RAsUl1yoj8F4K6OolVeYA
 v5eEB6kfliB3LzpSl4cIndLP0X+XoRotKCwB7Wkomxc/Aq/Nr2IyPCbOhaPyUP1j
 TrcHr8Rwyeaz0ZhHum4iwMy5mkbMnrlShqbnYv4mBepWitSBgMz+NKWxERQEaEhb
 SjvO5aYtIzudK55BVtPCCvMjLpq7A2IZPPoIP4YbteACK69oGeWrwAEzhTUivUbJ
 g2zZvNzC6A/Mz+b2WuL7nhaK7dsHuJHcpBSBac0UzDKNSzn9IX8IqosTrMKv48LF
 zvKNDwTn47PRfsjvkK6QzRUa22qmMk0Py9dNP5UxonUXNp8cbOzYQjBOlemLfJUC
 TQHW2V9fTD7ICoYYv2OmAWkpOl6ix2CW4pZcXYZnwyzWomuNIYK0wOPmPeLlljC7
 D6w5JPbubGgn/k8AQu04DG5x0TXw9xu6GxWcFmNZAZqWj+Au106rc/UAonz/2OEh
 aCaLBdfEsi+VNwLHGwklTwOGmXZQ302g33yluNK0Aryws2PrHUa0o0T8EWhyWUhq
 msGbfDUTp+jQVb3oubg0YuF8UNSHogWCgPM6sQ31EBRxUBCimVKEqsoRRTXdrExo
 yxsIkSPBfwY7fO1psqOER6x+bEvw5rMZ5qMQB+zWtK3MYzRzYShXNufzJ4JyIWlT
 7Gn8ATf3hLuLHP3kNygI
 =yhRv
 -----END PGP SIGNATURE-----

Merge tag 'hisi-soc-dt-for-4.9' of git://github.com/hisilicon/linux-hisi into next/dt64

Pull "ARM64: DT: Hisilicon SoC DT updates for 4.9" from Wei Xu:

- Set UART1 clock frequency to 150MHz for higher baud rates on hikey
- Add display subsystem, HDMI and cma nodes on hikey to support display
- Add syscon-reboot-mode support on hikey
- Add pstore support on hikey
- Add resets and sd-uhs-sdr property dwmmc ndoe on hikey
- Remove hip05_hns.dtsi since it can not be built without mbigenv1
- Update system controller bingding document for hip05 and hip06
- Add xge and sas support on hip06

* tag 'hisi-soc-dt-for-4.9' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hi6220: add sd-uhs- properties into dwmmc_1
  arm64: dts: hi6220: add resets property into dwmmc nodes
  arm64: dts: hikey: extend default cma size to 128MB
  arm64: dts: hip06: Append sas node
  arm64: dts: hip06: Append hns node
  dt-bindings: hisilicon: Add Hip05 and Hip06 system controller support
  arm64: dts: hip05: kill hip05_hns.dtsi
  arm64: dts: hikey: Add pstore support for HiKey
  arm64: dts: hikey: Add hikey support for syscon-reboot-mode
  arm64: dts: Add HDMI node for hi6220-hikey
  arm64: dts: Add display subsystem DT nodes for hi6220-hikey
  arm64: dts: set UART1 clock frequency to 150MHz
2016-09-14 17:01:17 +02:00
Jamie Lentin
d303633648 ARM: dts: orion5x: Configure WNR854T ethernet PHY LEDs
The default PHY configuration disables most of the LEDs. The following
configures the ethernet activity LEDs as Netgear intended.

[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 17:00:26 +02:00
Arnd Bergmann
530518af84 Samsung DeviceTree ARM64 update for v4.9:
1. Use human-friendly symbols for interrupt flags.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXxUvwAAoJEME3ZuaGi4PXHxYP/34lCHIKJh7I5Hs79vJUZjvL
 B6hkGHbuXf9GaSsrSruacI9Ju1bpJTRhB0OANZk75nYHOhO4zCQ7d4MMF9juDlWG
 XKaO/a47D3/RwEE1BUQJTaIFH8zmEsqzJi90cVynP9Vz0Jfb8YVb3DPwtWbVCB3t
 IVUBpP+e4MPrbpN3vy7Ja+xTaz3fLnJp24LYBfgY0+MzIIw2Go/u+9uYup2fXNRk
 H9Gk6LYQGlyNYHnpApiFKR/Iq/cnUPgJhe9SGACSiwlJFMVf8tmtw6QkdeapUx8P
 4XV8/9IuJJOTPBayaTLTVUTOEtZIbp+f7hiJLzB1b/vhME8v3L9T3UMtKo3Po3Ov
 ZHPNaRi+vV/QNw+Mcu5xhV/YFV+hURNat3TjLNcgPavINq8tixwH59wmvcx/Zbxe
 n/s1HSd1H6fiRA8oQiri46ciATf7fYkKyIewiqgrfQ02wN0Z6kY5V1t+sz1eaLEo
 6lHOsrQ56TWBBf6oFCZ8tLvXJgZNYYlgznIENxppitXwCz2r9CVHN29ZQPo1U8Xg
 6kQv5KWjpUo9Aqx0hSIiO+x3MykY8TwvpaZjycl/VA1JFca5rNvgF38cs3S3EfQw
 Sfm6+ZOHyntWes/pLpJdc6Ei4cyyXYWU/rN2QvrteJkd1GGVwUaX7OO2BDdLZCr3
 5HWdLg/h+WQCC8Dqt3j8
 =ILIK
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Pull "Samsung DeviceTree ARM64 update for v4.9" from Krzysztof Kozlowski:
1. Use human-friendly symbols for interrupt flags.

* tag 'samsung-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Use human-friendly symbols for timer interrupt flags
2016-09-14 16:51:15 +02:00
Arnd Bergmann
9b2a8b8bdb UniPhier ARM64 SoC DT updates for v4.9
* Match DT names other projects and documents
 * Use clock/reset drivers
 * Add new SoC/board support
 * Misc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXxfu+AAoJED2LAQed4NsGwEIQAI8ducW3ueLPt/KqQF4ko3w9
 JAJPkXp30XLQ41SqcHpjCO1FCC5DMG5XCXCzFPkoCP4GSASI1Iz3PBXMChWbUHz7
 +6FUCMSAKOiWMmCD9K+iFB+9i3yTQsw9kHgV8Q+ZGo8LWE6fWufFJMQHWfVJ6R7p
 /Mu/rfvPBjPJ5/7w4MGrL5QW6AVgJbcazzFCi3CYzeEyp2AuTZybHnjVBMq10gLg
 7lcz9bgcPIlXF3HpMzGsENbgc3++D9Cw/K2ui9z2wc5P4KHDhA5cZ6qUhZi9/nKT
 ChxSqEt2gdQl0m6x1hEne8+CPN3WcX47jfp9mc4zWPvxC2afi+G2vNSsTmD6Q63X
 /h7pj0MHRYOEpjaLdFTvZkshF3h50HHguyqJ2JgSLwuyISY/0efm61LbUDmoUtpa
 IlbNVENzr3RSnyGN/AsNc+Hp5iLhpgaXW6x2FV93dIK/+eWkZFx4BR1lsfReP56z
 /dq/jNkBa4FAi/FmmGHldOggMohWMOBGI7Ehh2t388vZJcTR1w3DdC2TIoAwq8Xt
 X3W/VJOPjXSmecxFv3Dujoa9qbC0kPdtq5sPpCzOb64tL8ulFiLDvqI6KxmVghdF
 LFzvAsMat0JUG3esDRHqmnS4AgKm1+lDoDvzJgZ8xRQ0g5IVEoeAhpnoHTJfRh9e
 XU+xWUSQTrcHtXH1rMMq
 =ctoy
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-dt64-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

Merge "UniPhier ARM64 SoC DT updates for v4.9" from Masahiro Yamada:

* Match DT names other projects and documents
* Use clock/reset drivers
* Add new SoC/board support
* Misc

* tag 'uniphier-dt64-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add LD11 SoC/Board support
  arm64: dts: uniphier: add specific compatible to SoC-Glue node
  arm64: dts: uniphier: use clock/reset controllers
  arm64: dts: uniphier: add pinctrl property to System Bus node
  arm64: dts: uniphier: match DT names to other projects and documents
2016-09-14 16:49:51 +02:00
Jamie Lentin
b6114633fb ARM: dts: orion5x: Add description for Netgear WNR854T
This is a router based on the mv88f5181 chipset.

http://www.netgear.com/support/product/WNR854T.aspx
http://wiki.openwrt.org/toh/netgear/wnr854t

[gregory.clement@free-electrons.com:
- extract dt part from "arm: orion5x: Add DT-based support for Netgear
  WNR854T"
- squashed "arm: orion5x: Alias uart0 to serial0 for all orion5x" into
this commit and move serial0 alias from dtsi to dts]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:47:26 +02:00
Arnd Bergmann
77a1c68a96 ARM: orion5x: remove extraneous NO_IRQ
rd88f6183ap-ge passes NO_IRQ as the interrupt line for its m25p80
NOR flash. However, this device never uses an interrupt and the
driver doesn't care, so we can simply remove the deprecated constant
here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:36:20 +02:00
Arnd Bergmann
fe158a17c1 ARM: orion: simplify orion_ge00_switch_init
One of the last users of NO_IRQ on ARM is the switch initialization
code on orion5x, which sometimes passes a GPIO based IRQ number.

However, the driver doesn't actually use this number, and according
to Andrew Lunn never will do it for non-DT based machines, so
we can simply drop the irq argument.

Simplifying it further, we can also drop the static platform_device
and instead call platform_device_register_data(), which in turn
lets us mark the platform_data structures as __initdata and slightly
reduce the memory consumption.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:36:13 +02:00
Arnd Bergmann
93a753bdc1 ARM: mvebu/orion: remove NO_IRQ check from device init
For most devices, we know in advance whether they have an
interrupt line or not, so we can avoid passing NO_IRQ and
instead split fill_resources() into two interfaces, with
only the new fill_resources_irq() function taking an irq
argument, which it then can use unconditionally.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:35:50 +02:00
Arnd Bergmann
7d619d8ae0 ARM: mv78xx0: simplify ethernet device creation
Out of the four ethernet devices on mv78xx0, only the first one
has an error interrupt line, for the other ones we pass NO_IRQ
and then ignore the argument.

In order to get closer to complete remove of NO_IRQ, this simply
drops the unused function arguments.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:35:37 +02:00
Jamie Lentin
91762fab30 ARM: dts: arm: orion5x: Add DT include for mv88f5181
Common definitions for the SoC for board definitions to use.

[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:24:38 +02:00
Jamie Lentin
220ece397c ARM: dts: orion5x: Add required properties for orion-wdt to DT node
orion-wdt refuses to start without these properties defined, so lift
definitions out of kirkwood/dove.dtsi

[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:24:37 +02:00
Thomas Petazzoni
93970e67bd arm64: dts: marvell: enable MSI for PCIe on Armada 7K/8K
This commit adds a reference to the appropriate MSI controller in the
description of the PCIe controllers on Marvel Armada 7K and 8K
platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:21:09 +02:00
Vitaly Kuznetsov
de75abbe01 arm/xen: fix SMP guests boot
Commit 88e957d6e4 ("xen: introduce xen_vcpu_id mapping") broke SMP
ARM guests on Xen. When FIFO-based event channels are in use (this is
the default), evtchn_fifo_alloc_control_block() is called on
CPU_UP_PREPARE event and this happens before we set up xen_vcpu_id
mapping in xen_starting_cpu. Temporary fix the issue by setting direct
Linux CPU id <-> Xen vCPU id mapping for all possible CPUs at boot. We
don't currently support kexec/kdump on Xen/ARM so these ids always
match.

In future, we have several ways to solve the issue, e.g.:

- Eliminate all hypercalls from CPU_UP_PREPARE, do them from the
  starting CPU. This can probably be done for both x86 and ARM and, if
  done, will allow us to get Xen's idea of vCPU id from CPUID/MPIDR on
  the starting CPU directly, no messing with ACPI/device tree
  required.

- Save vCPU id information from ACPI/device tree on ARM and use it to
  initialize xen_vcpu_id mapping. This is the same trick we currently
  do on x86.

Reported-by: Julien Grall <julien.grall@arm.com>
Tested-by: Wei Chen <Wei.Chen@arm.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-09-14 14:39:13 +01:00
Peter Griffin
443fd7c92f ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card
This patch enables the uniperif players 2 & 3 for b2120 boards
and also adds the "simple-audio-card" device node to interconnect
the SoC sound device and the codec.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14 13:37:29 +02:00
Peter Griffin
67f1ff404b ARM: STi: DT: STiH407: Add uniperif reader dt nodes
This patch adds the DT node for the uniperif reader
IP block found on STiH407 family silicon.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14 13:37:23 +02:00
Peter Griffin
271739b6d8 ARM: STi: DT: STiH407: Add uniperif player dt nodes
This patch adds the DT nodes for the uniperif player
IP blocks found on STiH407 family silicon.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14 13:37:17 +02:00
Peter Griffin
9cf807f602 ARM: STi: DT: STiH407: Add sti-sasg-codec dt node
This patch adds the dt node for the internal audio
codec IP.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14 13:37:12 +02:00
Peter Griffin
857d477feb ARM: DT: STiH407: Add spdif_out pinctrl config
This patch adds the pinctrl config for the spidf out
pins used by the sasg codec IP.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
2016-09-14 13:37:08 +02:00