Commit graph

127,691 commits

Author SHA1 Message Date
Paul Burton
801f823dc2 MIPS: c-r4k: Fix size calc when avoiding IPIs for small icache flushes
Commit f70ddc07b6 ("MIPS: c-r4k: Avoid small flush_icache_range SMP
calls") adds checks to force use of hit-type cache ops for small icache
flushes where they are globalised & index-type cache ops aren't, in
order to avoid the overhead of IPIs in those cases. However it
calculated the size of the region being flushed incorrectly, subtracting
the end address from the start address rather than the reverse. This
would have led to an overflow with size wrapping round to some large
value, and likely to the special case for avoiding IPIs not actually
being hit.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Fixes: f70ddc07b6 ("MIPS: c-r4k: Avoid small flush_icache_range SMP calls")
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14211/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13 17:37:20 +02:00
Arnd Bergmann
d9d37f70fe Allwinner DT changes for 4.9
Business as usual on our side, with a mix of new boards and new IPs enabled
 on boards:
   - Support for the GPIO found on the AXP PMIC
   - ESP8089 on the relevant boards
   - More boards converted to the reference design and q8 designs
   - New boards: Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange
     Pi Lite, Olimex A33-Olinuxino, Empire Electronix M712, inet-d978_rev2,
     Nano Pi Neo
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX0G1eAAoJEBx+YmzsjxAglB8P/j3Z9WDnNVh5MFuvJpPvT5Sc
 E4KiVmL5L5cHRAdJLS3sUTBCHzhv3iJZaHHmPVzRpDYwYL+XMieNpS7CknkD8Sct
 h5LtPk4ukazsrx86TEeBQ1CCBkI2CqXVnD/v68FY8rbIKGPOk52lUrI3lhbuHT1w
 XCSJj4SAMnHfmQWYE+eQpEYndWnMQCijdr3X2OuWl7WG+N+7d0h43QfA2GgR4Thv
 jP/s43LBgMf+GnVLn8hMgI2XZCv/TK+9ZWiDrDDNRS1dwlDrkcKfS+gMOM0sMzON
 tOs3OK4pLB37SQ4+7V3x8Vne7xWVmPXCr8gVYh1AZGLCpSGDNImNVDv9lvNiJiya
 PxbAgGx5eEJ1J4oZ9httT0vp4IGmGew1ZeRIij35+bOECAvNJ09bjMFguaVv3Mv5
 6vKXmbqW2j07TrneKZJMP5L9vheto1Z5AwWDAYDCmxHnkzXCyFNJ5oeo+lvg6EV5
 YWme3WdmLZtcLDIuffa1mlZ5CrtkV+QPdv/SqE/LBhXTSWiPwTaQaqlr57/+/e4Y
 fu2ECKBOP7Y3tanBHHJOMovX8rQ259TadmGOZWDh4bR/9CJ6J/OUWmYwvutBwVOc
 n17g3erYtNQm6/buGpqFTRsT9/EL5zQESJt2x2/DZwOOUipBRkm23Jd0kz/q7juw
 APAzF3rtbo20wld0ueMF
 =3Q+E
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT changes for 4.9" from Maxime Ripard:

Business as usual on our side, with a mix of new boards and new IPs enabled
on boards:
  - Support for the GPIO found on the AXP PMIC
  - ESP8089 on the relevant boards
  - More boards converted to the reference design and q8 designs
  - New boards: Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange
    Pi Lite, Olimex A33-Olinuxino, Empire Electronix M712, inet-d978_rev2,
    Nano Pi Neo

* tag 'sunxi-dt-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (31 commits)
  devicetree: Add vendor prefix for FriendlyARM
  ARM: dts: sun8i: Add dts file for the NanoPi NEO SBC
  ARM: dts: sun8i-q8-common: Add support for SDIO wifi controllers
  ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBC
  ARM: dts: sun8i: Orange Pi Plus dts is for the Plus and Plus 2
  ARM: dts: sun8i: Add PWM controller node in H3
  ARM: dts: sun8i: Add dts file for inet-d978_rev2 tablets
  ARM: dts: sun9i: Add missing #interrupt-cells to R_PIO pinctrl device node
  ARM: dts: sun8i: Rename reference-design-tablet touchscreen node
  ARM: dts: sun5i: Add dts file for the Empire Electronix M712 tablet
  ARM: dts: sun5i: Convert inet-98v-rev2 dts to use reference-design-tablet.dtsi
  ARM: dts: sun4i: Disable ohci1 on ba10-tv-box
  ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2809
  ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2407
  ARM: dts: sun8i: add NAND controller node for A23/A33
  ARM: dts: sun6i: Add new dts file for tablets using the inet-q972 PCB
  ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi
  ARM: dts: sun6i: colorfly-e708-q1: Remove unused mma8452_int_e708_q1 node
  ARM: dts: sun9i: Switch to the AC100 RTC clock outputs for osc32k
  ARM: dts: sun9i: cubieboard4: Add device node for AC100
  ...
2016-09-13 17:36:04 +02:00
Arnd Bergmann
a6023d0500 Second Round of Renesas ARM Based SoC DT Updates for v4.9
Fixes (for v4.9):
 * Correct PWM clock parent on r8a7794 SoC
 
 Clean-up:
 * Remove obsolete vsp1 properties from r8a779[01] SoCs
 
 New boards:
 * Add r8a7792/wheat and r7s72100/rskrza1 boards
 
 Enablement:
 * Enable LEDs, DU, SDHI on r8a7792/blanche board
 * Enable MMCIF and SDHI on r8a7794/alt board
 * Add SPI and VSP1 to r8a7792 SoC
 * Add ethernet to r7s72100 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXz8W+AAoJENfPZGlqN0++ITIP/ixpSZTzr3XZBbFEgJX73+XM
 plE74Udaeoy1BBsehm97lsB+PNSnkdbWNZtH+WGGlsiS1UCMFMmKiabwTcvaO4cV
 ORtYY53MsvRI5RUU81K8zag+jIXVhhL8k4MgvMzXWTck80ZXl6GB8FBStUYQed9G
 WYc15Qzwep5k9b3joE8ShKE7T+uy/iunIHxKu63ykOKIOvDBZB7BKyys8Sm6fX0s
 dp7psg6g9mEniNxCMISLgz1IDEaAWBY/UnZFBsCJt5CwWbE/omg5FrqefeDyieck
 vK0rp2B9BNsWMX1rE7lHqmuszQNZhISJwOV7xn+VBwhTYGMQ9gHcIFQd14Uie3dK
 oiDdY3Fbe/CIHGH8sk4A7LAWbIsVkHe2K6shiJd8zEE7Dw3ju5ZC0f7jcROav54Z
 VJc5F7iV7Jr37635JdpBgVc0e4n4WsOgyoFnohxaWOLnpROx83BPadYtszmusmiD
 tcpWvUQGjMyl0j1G5RfJQJsLmTq4SNaHO5jgCf2Hm/iMKTXeZla68DlT4qO2Fgj3
 G9Yi6+GBixTa/qTn0WmF5f9YUq8ljmD37ikH9MFLvtM8eYoaTezIkEmJHaOYVq00
 jSbYHdPvj2C/8B9JYars4H+B75Xaapkxf17O75Rg/rhDPAqVoWp0MtaQPpu9qXY0
 RHDl0QtcSQDaGiNJ6ncF
 =mvDC
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.9" from Simon Horman:

Fixes (for v4.9):
* Correct PWM clock parent on r8a7794 SoC

Clean-up:
* Remove obsolete vsp1 properties from r8a779[01] SoCs

New boards:
* Add r8a7792/wheat and r7s72100/rskrza1 boards

Enablement:
* Enable LEDs, DU, SDHI on r8a7792/blanche board
* Enable MMCIF and SDHI on r8a7794/alt board
* Add SPI and VSP1 to r8a7792 SoC
* Add ethernet to r7s72100 SoC

* tag 'renesas-dt2-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
  ARM: dts: wheat: add support for tactile switches
  ARM: dts: wheat: add QSPI support
  ARM: dts: r8a7792: add QSPI support
  ARM: dts: r8a7792: add QSPI clock
  ARM: dts: wheat: add SDHI0 support
  ARM: dts: wheat: add CAN support
  ARM: dts: r8a7794: fix PWM clock parent
  ARM: dts: rskrza1: add ethernet DT support
  ARM: dts: r7s72100: add ethernet to device tree
  ARM: dts: r7s72100: add ethernet clock to device tree
  ARM: dts: rskrza1: initial device tree
  ARM: dts: Add RSKRZA1 DT bindings documentation
  ARM: dts: wheat: add Ethernet support
  ARM: dts: wheat: initial device tree
  ARM: dts: document Wheat board
  ARM: dts: blanche: add support for general purpose LEDs
  ARM: dts: r8a7792: add VSP1V support
  ARM: dts: r8a7792: add VSP1V clocks
  ARM: dts: blanche: add DU support
  ARM: dts: blanche: add SDHI0 support
  ...
2016-09-13 17:34:49 +02:00
Arnd Bergmann
29b48f9860 Device Tree clean up for LPC18xx platform
* Removal of skeleton.dtsi from the common armv7-m dtsi together
   with lpc18xx and efm32 platforms.
 
 * Fix for unit address warnings from the dtc on lpc18xx/efm32.
   That is made possible with skeleton.dtsi gone.
 -----BEGIN PGP SIGNATURE-----
 
 iQEwBAABCAAaBQJXzyBlExxtYW5hYmlhbkBnbWFpbC5jb20ACgkQXnNIfj7+P9rV
 UwgAvfI2Lv75gqxfLhbIeKeY5Mxms8KGTmGJFX/xAIb9vUynAuVPhDnoie+bvDtA
 9lvJCAwL2pyrb5cyeofjq1lMscX8Ng6mSyrUZ+nhzZNXgNzPK0Z169gcLhugnNW5
 mk4TACKstfiCVQxlB1xa4JHa4/8r8EJ2ouB3Fwd6Zi1OJfC9bU9FFIgjOxfIRhWn
 W8swy5c1sufbUHnQbZeVCweCN4P6tAQN+bxaKgKawmWaVpCz/6jF/dRsD0zj8UHb
 J2nBSjo1Vac25ET9bz5K0jjNOK9BdOcvgbxD/EDDYTwQCbouRpnv+uQctVSyY98n
 2GIiX1Bk1W02NmKvXXQ/6RRz7g==
 =uht9
 -----END PGP SIGNATURE-----

Merge tag 'lpc18xx_dts_for_4.9_part2' of https://github.com/manabian/linux-lpc into next/dt

Pull "Device Tree clean up for LPC18xx platform" from Joachim Eastwood:

* Removal of skeleton.dtsi from the common armv7-m dtsi together
  with lpc18xx and efm32 platforms.

* Fix for unit address warnings from the dtc on lpc18xx/efm32.
  That is made possible with skeleton.dtsi gone.

* tag 'lpc18xx_dts_for_4.9_part2' of https://github.com/manabian/linux-lpc:
  ARM: dts: efm32: remove skeleton.dtsi include and fix unit address warnings
  ARM: dts: lpc18xx: remove skeleton.dtsi include and fix unit address warnings
  ARM: dts: armv7-m: remove skeleton.dtsi include
2016-09-13 17:32:51 +02:00
Arnd Bergmann
72f61d2e92 mvebu dt for 4.9 (part 1)
- update for Armada XP/38x allowing using direct access SPI
 - various improvement for Armada 39x platforms
 - add pinctrl information for NANd on Armada 38x
 - fix the kirkwood based Openblock A6 external GPIO pins
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlfMQ0gACgkQCwYYjhRyO9XZQgCfVtygCoGhhk2ou4huuBcWlutL
 It0An1jM4iRF4RwgWtikxEV00Ovg4dJw
 =LoDw
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-4.9-1' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu dt for 4.9 (part 1)" from Gregory CLEMENT:

- update for Armada XP/38x allowing using direct access SPI
- various improvement for Armada 39x platforms
- add pinctrl information for NANd on Armada 38x
- fix the kirkwood based Openblock A6 external GPIO pins

* tag 'mvebu-dt-4.9-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: mvebu: fix reference to a390 spi controller
  ARM: dts: armada-38x: Add NAND pinctrl information
  ARM: dts: kirkwood: Fix Openblock A6 external GPIO pins
  ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP Board
  ARM: dts: mvebu: armada-390-db: add support for the Armada 390 DB board
  ARM: dts: mvebu: armada-398-db: enable supported usb interfaces
  ARM: dts: mvebu: armada-398: update the dtsi about missing interfaces
  ARM: dts: mvebu: armada-395: add support for the Armada 395 SoC family
  ARM: dts: mvebu: armada-39x: enable rtc for all Armada-39x SoCs
  ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's
  ARM: dts: mvebu: armada-39x: enable watchdog for all Armada-39x SoCs
  ARM: dts: mvebu: armada-39x: enable the thermal sensor in Armada-39x SoCs
  ARM: dts: mvebu: armada-39x: enable PMU, CA9 SoC Controller and Coherency fabric
  ARM: dts: mvebu: armada-39x: update the SDHCI node on Armada 39x
  ARM: dts: mvebu: armada-390: add missing compatibility string and bracket
  ARM: dts: mvebu: a385-db-ap: add default partition description for NAND
  ARM: dts: mvebu: a385-db-ap: enable USB (orion-ehci) port
  ARM: dts: mvebu: armada-370-xp: Add MBus mappings for all SPI devices
  ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node
  ARM: dts: mvebu: Add SPI1 pinctrl defines for Armada XP
2016-09-13 17:31:16 +02:00
Arnd Bergmann
9992f21333 Qualcomm Device Tree Changes for v4.9
* Rework dr_mode on APQ8064 and Nexus7
 * Add MSM8974 BLSP1 UART1 port
 * Add AP148 SATA mapping
 * Add support for LG Nexus 5 (Hammerhead)
 * Fixup MSM8660/MSM8064 SPMI/MPP IRQs
 * Add Nexus7 IMEM/reboot reason
 * Add Honami touchscreen support
 * Add TSENS support on MSM8974, APQ8064, and APQ8084
 * Add APQ8060 Dragonboard PM8058 LEDs
 * Rework VPH PWR REG for MSM8974
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXycmZAAoJEFKiBbHx2RXV9xwQAJIkqjV4c9x7H6MAkfI1TyxE
 KfnkTbSRDwddvwoE8+Q7jlDcOi8CTw0mf6lkLX5O66GzP0xop0k5YQfGEGnOs3Ct
 5ikS7n55+6NE2PvF0HY4th1Lca0z6FSr48OONAXOuzwXsVoGv8MmKQKW8tLgdI3v
 cYnVfUgqU5JI1m3jhmYzn57bak8KktYUyt4RXjs+iIb1aYx1ol/PNp4Wp/87dpy3
 7B3lmVYp1Dp8P5d52jLjEV8m5pLEmn92YfaksLRTLeLwiwYwR8vfdR/sTnTVxa2/
 tOo0sXhPtsdq/jCu19z31eME5ucGlsqxOHg38TElgFDvztaz7KHwxOnQ/BgGYPmI
 niZEZty1uocAPULrxWOjuGSqaDhIWj1qmmxUGn8Si7MIlK+61ypCuJ9StC46PLjy
 uCnG64PibPEnikdM6pLT2qi6huz/O/8qR/HgGpEwHrRlzM5I88c5QljfPcgrTeNU
 P+D81RgK3/xyYOcZRsXb4imMtph/UwljK3/oa8gZYi50yRiT69zzRXMZeVTbLaiF
 zQJULk3h+4OXmUOzjnWzFZYxejVQ69uuSlnGt/OoD8zuD53R1v2PUE9U8tuh5iSY
 n28gJfz+wLbFBofbGwdujB1D9VTrHmSMcgbdmOpn56y3DB4LbKuyINhVXqMhHJuI
 HbeEj3o7J8HY1w37HW8K
 =hUYu
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Pull "Qualcomm Device Tree Changes for v4.9" from Andy Gross:

* Rework dr_mode on APQ8064 and Nexus7
* Add MSM8974 BLSP1 UART1 port
* Add AP148 SATA mapping
* Add support for LG Nexus 5 (Hammerhead)
* Fixup MSM8660/MSM8064 SPMI/MPP IRQs
* Add Nexus7 IMEM/reboot reason
* Add Honami touchscreen support
* Add TSENS support on MSM8974, APQ8064, and APQ8084
* Add APQ8060 Dragonboard PM8058 LEDs
* Rework VPH PWR REG for MSM8974

* tag 'qcom-dts-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
  ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
  ARM: dts: add PM8058 LEDs to the APQ8060 Dragonboard
  arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
  arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
  arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
  ARM: dts: msm8974: honami: Add touchscreen
  device-tree: nexus7: Add IMEM syscon and reboot reason support
  ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs
  ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs
  ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
  ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone
  ipq8064: dts: force AP148 SATA port mapping
  ARM: dts: msm8974: Add nodes for blsp1_uart1 serial port
  device-tree: aqp8064.dtsi: Remove usb phy dr_mode = "host"
  device-tree: nexus7: Set phy mode to otg instead of host
2016-09-13 17:29:08 +02:00
Mark Rutland
9c0da3cc61 ARM: dts: explicitly mark skeleton.dtsi as deprecated
As noted in commit 3ebee5a2e1 ("arm64: dts: kill skeleton.dtsi"),
there are a number of problems with skeleton.dtsi, and it would be
prefereable to remove it entirely. As there are a large number of
existing users, fixing these up will take a while.

This patch adds a note to arm's skeleton.dtsi noting that this is the
case, to make this more obvious and hopefully minimize new uptake of
skeleton.dtsi in the mean time.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-13 17:28:14 +02:00
Huacai Chen
3cbc6fc9c9 MIPS: Add a missing ".set pop" in an early commit
Commit 842dfc11ea ("MIPS: Fix build with binutils 2.24.51+") missing
a ".set pop" in macro fpu_restore_16even, so add it.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.18+
Patchwork: https://patchwork.linux-mips.org/patch/14210/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13 17:25:11 +02:00
Arnd Bergmann
af3fe47343 STi dts fixes and new STi 96board support:
Add thermal node for STiH407 family boards
 Add specific nodes for STMicroelectronics 96Board
 Add new B2260 STi board file = 96Board
 Fix ahci issue on STiH407 family
 Fix debugfs/pinctrl kernel warning
 Update gpio-cells and gpio specifier
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXyX3eAAoJEMrHeC97M/+mmHcP/3p2GXJd46L1A8Y9Yc3tEkPR
 UQ+kySCQcCuqRYiBywjciQXLguBaALEhJUC0OZ388vbz5tpAU1F+YmPH2oq3PFrt
 XE3EG2H/qs6jyzX9bC2bvbGnfpEdoJUlZ/+EOyHv+cMV4aqSx/OFt/s+u4guPnk1
 dGDmsxC3z8hmVug7uXbN/EJzaZVZPSvqrM2oLykz8WcznhDc9CpjL9DLKVdkO4KV
 a+pYFwAQ6C+rteX5WD1+lWk+S5fW2FjknfW0HglbOihhW0QQj8ZUTXtjkQm4rIPF
 ElBQz3K1r3ulHxuDjhTPnF4y99zwbIcdFJ9ZpLF8wqJd4Ezdhut5qk4+OPdmE4Me
 nqFKVp/FlZvTsPKhDSi3oWnLRj+s/fAI5nbG77bjQInW0nWDkDPalEhh+29empxg
 uqjOlPp/yE+2P54X4HQ+/lCFcwRS5hiRCjVXj6ElTG6mIqpMRIeEyXWIrc7T4pv6
 PFTUlx2AcRG6hIdqrSEfjPGSsqJ0QnMk68uh+u4UfCbTZgkoTrPKYULb/OHMn56i
 DbHxyIHQOeq9Fc5f/7VrtWubqAarOlXEXpuyJIOAKcKnhNiefg7H0BQcKZyvG/5U
 +I1xUmENSXY7zZlIa1ie9FqiRxMwwmjBUdtVJ38lQeNCKqsAaT6m7zjIXOxEOMcH
 7pmI1fyedjBM/5mfNahW
 =5YA+
 -----END PGP SIGNATURE-----

Merge tag 'sti-dt-for-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt

Pull "STi dts fixes and new STi 96board support" from Patrice Chotard:

Add thermal node for STiH407 family boards
Add specific nodes for STMicroelectronics 96Board
Add new B2260 STi board file = 96Board
Fix ahci issue on STiH407 family
Fix debugfs/pinctrl kernel warning
Update gpio-cells and gpio specifier

* tag 'sti-dt-for-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: dts: STiH41x-b2020: Update gpio specifier
  ARM: dts: STiH418-B2199: Update gpio specifier
  ARM: dts: STiH407-pinctrl: Update gpio-cells to 2
  ARM: dts: STi: Introduce B2260 board
  ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
  ARM: dts: STiH407-pinctrl: Add pinctrl_rgmii1_mdio_1 node
  ARM: dts: STiH407: Move non-removable property to board file
  ARM: dts: STiH407-pinctrl: Add i2c2_alt2_1 node
  ARM: dts: STiH410: Add thermal node
  ARM: dts: STiH407: Move pio20 node to fix kernel warning
2016-09-13 17:24:24 +02:00
Matt Redfearn
951c39cd3b MIPS: paravirt: Fix undefined reference to smp_bootstrap
If the paravirt machine is compiles without CONFIG_SMP, the following
linker error occurs

arch/mips/kernel/head.o: In function `kernel_entry':
(.ref.text+0x10): undefined reference to `smp_bootstrap'

due to the kernel entry macro always including SMP startup code.
Wrap this code in CONFIG_SMP to fix the error.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 3.16+
Patchwork: https://patchwork.linux-mips.org/patch/14212/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13 16:45:15 +02:00
Arnd Bergmann
3abb0c6cdc DTS related changes for omaps for v4.9 merge window:
- Update elm phandle for am335x
 
 - Fix overo NAND gpmc ranges, this has always been broken so it can
   wait for the merge window
 
 - Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too
   as it's been using the older configration since the dts got added
 
 - A series of dtc warning fixes for unit names
 
 - Keep dcdc3, 5 and 6 enabled during suspend on am347x boards
 
 - Disable DDR regulator during rtc-only/poweroff mode for am437x boards
 
 - Remove redundant regulator compatibles for am437x boards
 
 - Increas QSPI max frequency for dra7 boards
 
 - Enable QSPI for am57xx-idk-common
 
 - Enable am335x-wega audio support
 
 - Workaround for i845 for dra7
 
 - Update binding for logicpd boards
 
 - Add gpio-decoder nodes for am335x-icev2 board
 
 - Add linux,pci-domain property for dra7
 
 - Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree
   entries, these can wait for merge window as Ethernet works on dra7
 
 - A series of changes to drop skeleton.dtsi because of dtc warnings
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJXyErxERx0b255QGF0b21pZGUuY29tAAoJEBvUPslcq6VzEU0Q
 ALfYnZ2/cNZ8ZkQ0jDLSxAOgb6SrXM5L6iUIYCyVuO6JP+lU88Zn0iQlB1wcD+e8
 Gx87pnexDmPHznwrwWDyXqP6U89vJM9eBdUHoGIt8fr0On7DGQXAN1yrHN+N2kxa
 y7DDePdu1InQM0oXeVqrKdSDNwnCMJpsdHOjmlB1bH83arrMOsG1bZZG3b5LgSTT
 zJss1l3ipw2YJhkGheHCai6bClrko9z8OcbmSF4qogMDs19+QiC9AZ2lIwAF8czG
 ll+/0Mwb9v0K4R/u+KZ9wC8tjz+Skitt0ffDSBpmP7ZBVJRRr5s3PxYDH6vSs+tM
 zVNH2jy1SvnSpxJ3lpIis1WzMi2hr9X9iM3qTzRX5JE+wBGuas1CDVy5duQXtb4d
 QRZWeHdQAX+x5MIRuVgYks6uDPHd6J6uXTlLNjASw5MRDSAGqnYv65BxYc+v5wyW
 v0kj+yQk9ewiwIL3z0T4mJg04mO/hFh+G/B868Un/uafuxvoxEGH1TaSEz3j1Ow3
 o1OGkxVWJj4N/tc7EP1EIqjFid6wAeu1eJdFkqv3zJjphOfKhToFg2T/5bUjbrFD
 mlRyx3aOBxwbrkTUcSC5Qxy/q9DFT7kYm4RESk03zID2QTJmcTpwqNaYX6/jmVFT
 xK7mWB4kyTkl/wC+/XJgLztsm79cDY0cWLDQd0zskyqU
 =k+4W
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "DTS related changes for omaps for v4.9 merge window" from Tony Lindgren:

- Update elm phandle for am335x

- Fix overo NAND gpmc ranges, this has always been broken so it can
  wait for the merge window

- Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too
  as it's been using the older configration since the dts got added

- A series of dtc warning fixes for unit names

- Keep dcdc3, 5 and 6 enabled during suspend on am347x boards

- Disable DDR regulator during rtc-only/poweroff mode for am437x boards

- Remove redundant regulator compatibles for am437x boards

- Increas QSPI max frequency for dra7 boards

- Enable QSPI for am57xx-idk-common

- Enable am335x-wega audio support

- Workaround for i845 for dra7

- Update binding for logicpd boards

- Add gpio-decoder nodes for am335x-icev2 board

- Add linux,pci-domain property for dra7

- Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree
  entries, these can wait for merge window as Ethernet works on dra7

- A series of changes to drop skeleton.dtsi because of dtc warnings

* tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (54 commits)
  ARM: dts: dra7: Add missing unit name to memory nodes
  ARM: dts: dra62x: Add missing unit name to memory nodes
  ARM: dts: dm8168: Add missing unit name to memory nodes
  ARM: dts: dm8148: Add missing unit name to memory nodes
  ARM: dts: am572x: Add missing unit name to memory nodes
  ARM: dts: am4372: Add missing unit name to memory nodes
  ARM: dts: am3517: Add missing unit name to memory nodes
  ARM: dts: am335x: Add missing unit name to memory nodes
  ARM: dts: omap5: Add missing unit name to memory nodes
  ARM: dts: omap4: Add missing unit name to memory nodes
  ARM: dts: omap3: Add missing unit name to memory nodes
  ARM: dts: omap2: Add missing unit name to memory nodes
  ARM: dts: am4372: Remove skeleton.dtsi usage
  ARM: dts: dra7: Remove skeleton.dtsi usage
  ARM: dts: dm816x: Remove skeleton.dtsi usage
  ARM: dts: dm814x: Remove skeleton.dtsi usage
  ARM: dts: am33xx: Remove skeleton.dtsi usage
  ARM: dts: omap5: Remove skeleton.dtsi usage
  ARM: dts: omap4: Remove skeleton.dtsi usage
  ARM: dts: omap3: Remove skeleton.dtsi usage
  ...
2016-09-13 16:27:42 +02:00
Arnd Bergmann
cbd1d63c77 ARM: dts: Keystone DTS for 4.9
Add K2G nodes for GPIO, IRQ and Message Manager
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXx17yAAoJEHJsHOdBp5c/XYYQAJqObNQw1/Hc0+uQl1ZQd4nf
 m6waeFM39qaU7x0bzc6+H9s4LxEQsBi6uQfilU+/Rh44r/kmEYbmmgijSKPJcfYt
 6UNfvgIln1TPTaFNRQ0UqOTALBUY3K2SbEykfHEFNdLIRV17Z8kfXTJboHg3AgG8
 05bdrEFFZ+G1PD1eAZTU7Xi2jPi67FT8QyiGOR1uTSCSqK+jH0K8LsPtmITdM8nk
 BaEe/BEfopn3IgdViE6hPGiqTIEpHFeY2H2Umata2KBnsGXX0Tm1iq1DyXiPNwQ7
 xzbJkNwIfo7JMz94IBl/a675IUXUna1cUj2sI33UqJE6szK6qs2CHufWOp3zcnN6
 Jh1yzxRJREcTNeioeO5O7h+yA+Ip0X0OOc0Xh3PB5pVIBWXQTuSNkbmgc/LOUpyP
 8r0bpj7+zjh3C3brdUiTU3g7jXtPXNRRr+Xvrwiuzn0J8EgDsYVAEPk06rCYKp8P
 NV7GC+r7tnFI0UaVcgWZpGMZlTOYsZnntMUZJYPycd0EuUa+8uwabb8xsd4PrIvh
 +D8Wo1jnEvM5P31I+cNk7FSVcumGF6x1qtxt/ZlqPk0vnpCQKlxfG64wXIWRqDWY
 8CYMT0cH6NRQR+/VY00seLRF7LQvOOW8y0R+7lIxwWdFbrTErAnlvbPwjv+ewrFj
 I6Z/PtnurmFT0hJaP3zd
 =Zz3r
 -----END PGP SIGNATURE-----

Merge tag 'keystone_dts_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Merge "ARM: dts: Keystone DTS for 4.9" from Santosh Shilimkar

Add K2G nodes for GPIO, IRQ and Message Manager

* tag 'keystone_dts_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone-k2g: Add Message Manager node
  ARM: dts: keystone-k2g: Add DSP GPIO controller node
  ARM: dts: keystone-k2g: Add keystone IRQ controller node
  ARM: dts: keystone-k2g: Add device state controller node
  ARM: dts: keystone: specify usb mode explicitly
2016-09-13 16:21:02 +02:00
Arnd Bergmann
30d430d9b6 UniPhier ARM SoC DT updates for v4.9
* Match DT names other projects and documents
 * Switch over to PSCI
 * Use clock/reset drivers
 * Misc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXxfueAAoJED2LAQed4NsGc5kP/ije++q5nQTiI3rQuvCx2SVW
 XJmPY23UDMUpL/lArgJ+MFpTPMPLGfr7qGp+Dhqpdnfx84FJTO+KWtzF8bmz6t7k
 DifWvpR453pmCJDKBp+IhQf/x6cY6oMz7xxbumydZRpGTJlM/ARq4taQEQ3ucEJm
 nMAgwyo9yck5ZyzHsxs/eOW6Bw7W0YbvaBJhA5aqyCKK90d2Lc4yZ5D3z6eT9SvR
 d3OdSm/epo1rI3XiCZbHJ+ZvmE28jG+RUxAzqEEXR/NfnZNN+pzAx/Eraz25XtZF
 w6yA1CH3GBsve9T9DAy/xj8UFYQTq0nSENEctt+1AEXpP9Fk4QKdHEIRgf3pbpUs
 BnOr/qZeDaI2yanxJ5sD5LTfXtrllxMQhXF+xL7DSUK7Ii85d+HFlC4Y/DWoGprG
 3BEGJPLTMk7qaQ6XX6w+tRMFa9IjEyzedQzD/5OkZxBBBoUHOFvDwEJQOJOvlD+Q
 nMkt/100ciXsP9GRbL3+fVjvGUQP7P4rEY7Qm/6XKBkE3vyE3VTB6MgxQO38LIhZ
 XFGYwev/10VESRKp2Bk2YScLnyb/J5MZK5iM//MXoBULlRw4Gm5UO8xlZ92NL7ag
 cPAufLP+fgjZrxwDy52tJ/gBIANORsUyevI044apKquvynUg63+uJp1mcD720REz
 UzRZNQNSmULeBFPB3JvN
 =E7B0
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-dt-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

Merge "UniPhier ARM SoC DT updates for v4.9" from Masahiro Yamada:

* Match DT names other projects and documents
* Switch over to PSCI
* Use clock/reset drivers
* Misc

* tag 'uniphier-dt-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: add specific compatible to SoC-Glue node
  ARM: dts: uniphier: use clock/reset controllers
  ARM: dts: uniphier: switch over to PSCI
  ARM: dts: uniphier: match DT names to other projects and documents
  ARM: dts: uniphier: remove a whitespace after tabs
2016-09-13 16:11:51 +02:00
Arnd Bergmann
6f7f9e4418 Samsung DeviceTree update for v4.9:
1. Set chosen serial bitrate which allows proper serial output when
    bootloader does pass all the data in command line.
 2. Cleanup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXxUu4AAoJEME3ZuaGi4PXvHEP/jtgqI3x2AKqSeHZ67JVetvV
 9mmRFcyOHavz7D0kutUnKxuHMAM6j/0CBVVJblbDrDz1MTtQc2O1q6aCqambwi8y
 RW9Uckbn0WtA3VNKp+FlIe3nB7VBpBYwwdjCx9az5Z7SAO4S2eMKg3HAPNJPjphd
 Dhu27NpwQlFOvmKkVvKRpJtXbLRL77ustSbQEGeKyVuT1flzKXe8rkwJI642V1Ur
 lCcgIv8Hf5L5kREg9qvbRMVpFk5hIDTLIuPz9ToM5H3hjU7jGHz2DiAx/Ec9K5GJ
 RihGgVFE4pQxQil9mlF8SDc8D326zgs760f8TbqVpdf1uT6FvbSWm75IbkZAlXZ3
 Pyq5j+2Trx5fA3phi7L0Jz8yq04tXBRbHC15bTXE2X9d8l/djZopTtLCAUZkewFd
 Mv2UicPMGDwkA5/QMvz38U2rhiAiNTgSBvj9Py5DmpyIfuwbJr+xZkKDedX5Vvc7
 bDOPOg/+XOA6AOcmsK1Fsu2i9M6SZL9MuRtKq9hMsGmuZ8OB1TFqWiAHy/AusG2r
 +/mKjXV2Xi/zF8tVJhfgKDNF+k9vsUT2v91TLH3gKO7FXEpdvXSoh5fCfid9GiSC
 QznTz+t62e4r1utMzl37hf2lDtxOKH9/7xNM/1O2wPhVgw9pWP+slYqZLYNkSaLB
 1PA1vrrYEGZ9grucSYE8
 =8Yu8
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Merge "Samsung DeviceTree update for v4.9" from Krzysztof Kozlowski:

1. Set chosen serial bitrate which allows proper serial output when
   bootloader does pass all the data in command line.
2. Cleanup.

* tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio'
  ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4
2016-09-13 16:09:10 +02:00
Arnd Bergmann
94c6a37a74 Device Tree additions for LPC18xx platform
Small fix for the compatible string for the NXP SE97 I2C chip on the
 Hitex Eval board from Guenter and a couple of additional DT properties
 for the DWMAC that is need for correct operation.
 -----BEGIN PGP SIGNATURE-----
 
 iQEwBAABCAAaBQJXwaK1ExxtYW5hYmlhbkBnbWFpbC5jb20ACgkQXnNIfj7+P9pm
 QggAtv1kaNAQoEliCaHtHOdBhpgTNZJoYUnUWUUuhl8fwpin3/b/c6NJyupACbJB
 YN9zj4Ijus6veqdKSG/SyyLeiouJcNvL2azj2r7zlpt0qXeqBzmZx9iBRcLB4vK+
 /mlTmdUVYAcnOINnasC5A007m8PbUKSIulDOFuER+IpR54gI5uYv8KaQpJ0POzJO
 LcIlMr0HnzniRWNL5XniGmaILo5HUTNuKNvpZc1FW2TFaz+ICMQw7GfK+bM76dhD
 ezegetPT+kjxYamQAl/JduWQ+PAmzW3vucy0c1wYr1NvHYEObHe8DKpWDJmjQMdz
 coGmSgWNoXjFmg4wbQ2l1sqYSw==
 =QuiX
 -----END PGP SIGNATURE-----

Merge tag 'lpc18xx_dts_for_4.9' of https://github.com/manabian/linux-lpc into next/dt

Merge "Device Tree additions for LPC18xx platform" from Joachim Eastwood:

Small fix for the compatible string for the NXP SE97 I2C chip on the
Hitex Eval board from Guenter and a couple of additional DT properties
for the DWMAC that is need for correct operation.

* tag 'lpc18xx_dts_for_4.9' of https://github.com/manabian/linux-lpc:
  ARM: dts: lpc18xx: configure dwmac properly
  ARM: dts: lpc4350-hitex-eval: fix binding for SE97 i2c device
2016-09-13 16:06:41 +02:00
Lars Persson
92467a5fd5 ARM: dts: artpec: set irq affinity on pmu interrupts
The irq affinity is required for pmu interrupts.

Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-13 16:04:46 +02:00
Lars Persson
1b875160af ARM: dts: artpec: use optimized pl310 settings
Use the cache settings that were determined to give best performance
on artpec-6 typical workloads.

Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-13 16:04:40 +02:00
Lars Persson
d09ea47ac8 ARM: dts: artpec: use clock binding header
Use defines from the clock binding header as clock indexes.

Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-13 16:04:28 +02:00
Arnd Bergmann
93329cd046 Renesas ARM Based SoC DT Updates for v4.9
* Add DU, VIN, I2C, SDHI, EtherAVB, GPIO support to r8a7792
 * Enable CAN0 on r8a7792/blanche
 * Enable sound on r8a7794/silk
 * Correct SDHI register size on r8a7794
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXsYLcAAoJENfPZGlqN0++yJoQALZslDHrmZLDWIjf4aWhF1/t
 AHKX5mQJ4sAAQMdFrXQxi10PdCdjrYEeTpzvTPKBozpNsvxfrGmsxgQgkoeY2/an
 v5KN55O4ryUHtG2sBVs0ltGjiILi4OJvEpe2jHeFTpSiGnOkMjTYCJ456+6CE81v
 8XF4Mk07ho3YlJPirdWPfCrNxWM2UZzxcC68JGOzv3YbI16P4+1XvhBr26Pk0UOm
 biKVUOraE8THGx3zvrd+oZ0SFVn96NZwya2eF7nhwhJF5pnknCUFIFjGaYVfKNnG
 ffjfgpAr7wTLBBSSLZUU6MHq5CND0RAiz9J28mT/cmZsubl4VrmfmjO2sg4icevM
 XsIyQ9+g9Y0ge+wqb1SGgObnfXAArFNIcfvsyiZdsG5yacA4ax1AGYXMqxkNK9pv
 tyFeGeo5lYVp/BjIS6BDB9Rupd5DIyDSVIU70fsjlnJsDN8JyERO/qQh5g+NuVgF
 N+E/EByIYmQynilcMV/od6vXYWKJzq6pGE2slKx15T/KrnDglrUPKa80YEhJWIVP
 uBT6ooC+2JJ7M/vbqeiPKyQ4UvEYnvX/0s4HDwrcOwksP+aXSZZ/2ZIp4Fq9f7BD
 kEs1I/Qh2oSzo1Sj3pa5IZwISQ1N19CTPLMOfLaun0MwK0hhrXUjHYwLcq6Oqku+
 1NcspdYSViVUgHjkJky4
 =YZIK
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v4.9" from Simon Horman:

* Add DU, VIN, I2C, SDHI, EtherAVB, GPIO support to r8a7792
* Enable CAN0 on r8a7792/blanche
* Enable sound on r8a7794/silk
* Correct SDHI register size on r8a7794

* tag 'renesas-dt-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
  ARM: dts: r8a7792: add DU support
  ARM: dts: r8a7792: add DU clocks
  ARM: dts: r8a7792: fix misindented line
  ARM: dts: silk: add sound support
  ARM: dts: r8a7794: add sound support
  ARM: dts: r8a7794: add Audio-DMAC support
  ARM: dts: r8a7794: add MSTP10 clocks
  ARM: dts: r8a7794: add MSTP5 clocks
  ARM: dts: r8a7794: add audio clocks
  ARM: dts: r8a7792: add VIN support
  ARM: dts: r8a7792: add VIN clocks
  ARM: dts: r8a7792: add I2C support
  ARM: dts: r8a7792: add I2C clocks
  ARM: dts: r8a7792: add SDHI support
  ARM: dts: r8a7792: add SD clocks
  ARM: dts: r8a7794: Correct SDHI register size
  ARM: dts: blanche: add CAN0 support
  ARM: dts: r8a7792: add CAN support
  ARM: dts: r8a7792: add CAN clocks
  ARM: dts: r8a7792: add EtherAVB support
  ...
2016-09-13 16:01:12 +02:00
Nicolas Iooss
ba6d018e3d x86/mm/pkeys: Do not skip PKRU register if debug registers are not used
__show_regs() fails to dump the PKRU state when the debug registers are in
their default state because there is a return statement on the debug
register state.

Change the logic to report PKRU value even when debug registers are in
their default state.

Fixes:c0b17b5bd4b7 ("x86/mm/pkeys: Dump PKRU with other kernel registers")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20160910183045.4618-1-nicolas.iooss_linux@m4x.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:52:28 +02:00
Borislav Petkov
7cc4ef8ed1 x86/RAS/mce_amd_inj: Fix some W= warnings
In particular:

  arch/x86/ras/mce_amd_inj.c: In function ‘prepare_msrs’:
  arch/x86/ras/mce_amd_inj.c:249:13: warning: declaration of ‘i_mce’ shadows a global declaration [-Wshadow]
    struct mce i_mce = *(struct mce *)info;
               ^~~~~

  arch/x86/ras/mce_amd_inj.c: In function ‘init_mce_inject’:
  arch/x86/ras/mce_amd_inj.c:453:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
    for (i = 0; i < ARRAY_SIZE(dfs_fls); i++) {

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20160912075941.24699-16-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:14 +02:00
Yazen Ghannam
a884675b87 x86/MCE/AMD, EDAC: Handle reserved bank 4 on Fam17h properly
Bank 4 is reserved on family 0x17 and shouldn't generate any MCE
records. However, broken hardware and software is not something unheard
of so warn about bank 4 errors. They shouldn't be coming from bank 4
naturally but users can still use mce_amd_inj to simulate errors from it
for testing purposed.

Also, avoid special handling in the injector mce_amd_inj like it is
being done on the older families.

[ bp: Rewrite commit message and merge into one patch. Use boot_cpu_data. ]

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Aravind Gopalakrishnan  <aravindksg.lkml@gmail.com>
Link: http://lkml.kernel.org/r/1473384591-5323-1-git-send-email-Yazen.Ghannam@amd.com
Link: http://lkml.kernel.org/r/1473384591-5323-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:14 +02:00
Yazen Ghannam
4f29b73bae x86/mce/AMD: Extract the error address on SMCA systems
The MCA_ADDR registers on Scalable MCA systems contain the ErrorAddr
in bits [55:0] and the least significant bit of the address in bits
[61:56]. We should extract the valid ErrorAddr bits from the MCA_ADDR
register rather than saving the raw value to struct mce.

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1473275643-1721-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:13 +02:00
Yazen Ghannam
4b711f92c9 x86/mce, EDAC/mce_amd: Print MCA_SYND and MCA_IPID during MCE on SMCA systems
The MCA_SYND and MCA_IPID registers contain valuable information and
should be included in MCE output. The MCA_SYND register contains
syndrome and other error information, and the MCA_IPID register will
uniquely identify the MCA bank's type without having to rely on system
software.

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472680624-34221-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:13 +02:00
Yazen Ghannam
5828c46f2c x86/mce/AMD: Save MCA_IPID in MCE struct on SMCA systems
The MCA_IPID register uniquely identifies a bank's type and instance
on Scalable MCA systems. We should save the value of this register
in struct mce along with the other relevant error information. This
ensures that we can decode errors without relying on system software to
correlate the bank to the type.

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472680624-34221-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:12 +02:00
Yazen Ghannam
66ef269dbb x86/mce/AMD: Ensure the deferred error interrupt is of type APIC on SMCA systems
The Deferred Error Interrupt Type is set per bank on Scalable MCA
systems. This is done in a bitfield in the MCA_CONFIG register of each
bank. We should set its type to APIC-based interrupt and not assume BIOS
has set it for us.

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472737486-1720-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:11 +02:00
Yazen Ghannam
87a6d4091b x86/mce/AMD: Update sysfs bank names for SMCA systems
Define a bank's sysfs filename based on its IP type and InstanceId.

Credits go to Aravind  for:
 * The general idea and proto- get_name().
 * Defining smca_umc_block_names[] and buf_mcatype[].

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Link: http://lkml.kernel.org/r/1473193490-3291-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:11 +02:00
Yazen Ghannam
5896820e0a x86/mce/AMD, EDAC/mce_amd: Define and use tables for known SMCA IP types
Scalable MCA defines a number of IP types. An MCA bank on an SMCA
system is defined as one of these IP types. A bank's type is uniquely
identified by the combination of the HWID and MCATYPE values read from
its MCA_IPID register.

Add the required tables in order to be able to lookup error descriptions
based on a bank's type and the error's extended error code.

[ bp: Align comments, simplify a bit. ]

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472741832-1690-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:10 +02:00
Yazen Ghannam
cfee4f6f0b x86/mce/AMD: Read MSRs on the CPU allocating the threshold blocks
Scalable MCA systems allow non-core MCA banks to only be accessible by
certain CPUs. The MSRs for these banks are Read-as-Zero on other CPUs.

During allocate_threshold_blocks(), get_block_address() can be scheduled
on CPUs other than the one allocating the block. This causes the MSRs to
be read on the wrong CPU and results in incorrect behavior.

Add a @cpu parameter to get_block_address() and pass this in to ensure
that the MSRs are only read on the CPU that is allocating the block.

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472673994-12235-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:08 +02:00
Yazen Ghannam
bad744b7f2 x86/RAS: Add syndrome support to mce_amd_inj
Add a debugfs file which holds the error syndrome (written into
MCA_SYND) of an injected error. Only write it on SMCA systems. Update
README file, while at it.

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1467633035-32080-3-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:07 +02:00
Yazen Ghannam
db819d60f6 x86/mce: Add support for new MCA_SYND register
Syndrome information is no longer contained in MCA_STATUS for SMCA
systems but in a new register - MCA_SYND.

Add a synd field to struct mce to hold MCA_SYND register value. Add it
to the end of struct mce to maintain compatibility with old versions of
mcelog. Also, add it to the respective tracepoint.

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1467633035-32080-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:06 +02:00
Yazen Ghannam
74ab0e7a83 x86/mce/AMD: Use msr_ops.misc() in allocate_threshold_blocks()
Change MSR_IA32_MCx_MISC() macro to msr_ops.misc() because SMCA machines
define a different set of MSRs and msr_ops will give you the correct
MISC register.

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1468269447-8808-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13 15:23:06 +02:00
Paolo Bonzini
ad53e35ae5 Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
Paul Mackerras writes:

    The highlights are:

    * Reduced latency for interrupts from PCI pass-through devices, from
      Suresh Warrier and me.
    * Halt-polling implementation from Suraj Jitindar Singh.
    * 64-bit VCPU statistics, also from Suraj.
    * Various other minor fixes and improvements.
2016-09-13 15:20:55 +02:00
Paul Burton
b03c1e3b8e MIPS: Remove compact branch policy Kconfig entries
Commit c1a0e9bc88 ("MIPS: Allow compact branch policy to be changed")
added Kconfig entries allowing for the compact branch policy used by the
compiler for MIPSr6 kernels to be specified. This can be useful for
debugging, particularly in systems where compact branches have recently
been introduced.

Unfortunately mainline gcc 5.x supports MIPSr6 but not the
-mcompact-branches compiler flag, leading to MIPSr6 kernels failing to
build with gcc 5.x with errors such as:

  mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal'
  make[2]: *** [kernel/bounds.s] Error 1

Fixing this by hiding the Kconfig entry behind another seems to be more
hassle than it's worth, as MIPSr6 & compact branches have been around
for a while now and if policy does need to be set for debug it can be
done easily enough with KCFLAGS. Therefore remove the compact branch
policy Kconfig entries & their handling in the Makefile.

This reverts commit c1a0e9bc88 ("MIPS: Allow compact branch policy to
be changed").

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: c1a0e9bc88 ("MIPS: Allow compact branch policy to be changed")
Cc: stable <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14241/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13 14:14:50 +02:00
James Hogan
ac7e385f2b MIPS: MAAR: Fix address alignment
The alignment of MIPS MAAR region addresses isn't quite right.

- It rounds an already 64 KiB aligned start address up to the next
  64 KiB boundary, e.g. 0x80000000 is rounded up to 0x80010000.

- It assumes the end address is already on a 64 KiB boundary and doesn't
  round it down. Should that not be the case it will hit the second
  BUG_ON() in write_maar_pair().

Both cases are addressed by rounding up and down to 64 KiB boundaries in
the more traditional way of adding 0xffff (for rounding up) and masking
off the low 16 bits.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13858/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13 14:13:26 +02:00
James Hogan
58cae9b0f0 MIPS: Fix memory regions reaching top of physical
Memory regions added with add_memory_region() at the top of the physical
address space will have their end address overflow to 0. This causes
them to be rejected as invalid, and would cause various other issues
later on.

This causes issues on Malta and Boston platforms when wanting to use all
2GB of RAM on a 32-bit kernel, either via highmem (using physical
addresses 0x90000000..0xFFFFFFFF), or with the Malta Enhanced Virtual
Addressing (EVA) layout which exposes the whole 0x80000000..0xFFFFFFFF
physical address range to kernel mode at 0x00000000..0x7FFFFFFF.

Due to the abundance of these non-overflow assumptions and the fact that
memblock already avoids the arithmetic overflow by limiting the size of
new memory regions without the arch code knowing it (in particular
mem_init_free_highmem() will trigger a page dump due to nonzero mapcount
on the last page), it is simpler and safer to just limit the size of the
region in a similar way to memblock but at the arch level to allow most
of the RAM to be used without arithmetic overflows.

Therefore we detect this case specifically and reduce the size of the
region slightly to avoid the arithmetic overflows and cause the last
page to be ignored.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13857/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13 14:13:26 +02:00
Marcin Nowakowski
2809328f6e MIPS: uprobes: fix incorrect uprobe brk handling
When a uprobe-replacement breakpoint instruction is handled, a notifier
is called with DIE_UPROBE argument, but a corresponding exception notify
handler for MIPS attempts to handle DIE_BREAK instead. As a result
the breakpoint instruction isn't handled by the uprobe code and the probed
application terminates with SIGTRAP.
Fix this by changing arch_uprobe_exception_notify code to handle
DIE_UPROBE as a pre-singlestep condition instead of DIE_BREAK.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13 14:13:26 +02:00
Amitoj Kaur Chawla
e3b23148fd MIPS: ath79: Fix test for error return of clk_register_fixed_factor().
clk_register_fixed_factor returns an ERR_PTR in case of an error and
should have an IS_ERR check instead of a null check.

The Coccinelle semantic patch used to find this issue is as follows:
@@
expression e;
statement S;
@@

*e = clk_register_fixed_factor(...);
if (!e) S

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Cc: julia.lawall@lip6.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13894/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13 14:13:26 +02:00
Ard Biesheuvel
2db34e78f1 crypto: arm64/aes-ctr - fix NULL dereference in tail processing
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.

However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.

Fixes: 49788fe2a1 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions")
Cc: stable@vger.kernel.org
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-09-13 18:44:59 +08:00
Ard Biesheuvel
f82e90b286 crypto: arm/aes-ctr - fix NULL dereference in tail processing
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.

However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.

Fixes: 86464859cc ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions")
Cc: stable@vger.kernel.org
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-09-13 18:44:59 +08:00
Linus Walleij
eb8994172a Linux 4.8-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXsSTlAAoJEHm+PkMAQRiGZaYH/1MarD897Cju7AgQj8UYQYXB
 dsG3iuoJMj0ji/V466lmHZnS0pwmpJV3qBp7znaFI5jLoTYD2+BkBDY/FLQLqQH7
 vkRKOCLCbppKkDDsgd3dS3FFOnJC724iqnSsPegp2lz/8OS2dIs8i82PgKX3zQjJ
 PqkcMOEt3YlTV18/LiGvQhXWHJ/x8oIvcO0KuLcz3adX0B15+qZyJo1Ss3Z0HL/V
 CqcSVaLgDe0fAAMCexUcKxRNtvGrMENxYRE9YXJFxu1do2H4opXmt0qGun0yxSN4
 8/Y74BB80yUak8lM4mHMCy2G2lDmB32f188yPN45Hg6+F71UJChXXKUnyzUhx14=
 =QQX1
 -----END PGP SIGNATURE-----

Merge tag 'v4.8-rc2' into devel

Linux 4.8-rc2
2016-09-13 10:31:40 +02:00
Simon Guo
e1c0d66fcb powerpc: Set used_(vsr|vr|spe) in sigreturn path when MSR bits are active
Normally, when MSR[VSX/VR/SPE] bits == 1, the used_vsr/used_vr/used_spe
bit have already been set. However when loading a signal frame from user
space we need to explicitly set used_vsr/used_vr/used_spe to make them
consistent with the MSR bits from the signal frame.

For example, CRIU application, who utilizes sigreturn to restore
checkpointed process, will lead to the case where MSR[VSX] bit is active
in signal frame, but used_vsr bit is not set in the kernel. (the same
applies to VR/SPE).

This patch fixes this by always setting used_* bit when MSR related bits
are active in signal frame and we are doing sigreturn.

Based on a proposal by Benh.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:12 +10:00
Simon Guo
261831160d powerpc/ptrace: Fix cppcheck issue in gpr32_set_common/gpr32_get_common()
The ckpt_regs usage in gpr32_set_common/gpr32_get_common() will lead to
following cppcheck error at ifndef CONFIG_PPC_TRANSACTIONAL_MEM case:

[arch/powerpc/kernel/ptrace.c:2062]:
(error) Uninitialized variable: ckpt_regs
[arch/powerpc/kernel/ptrace.c:2130]:
(error) Uninitialized variable: ckpt_regs

The problem is due to gpr32_set_common() used ckpt_regs variable which
only makes sense at #ifdef CONFIG_PPC_TRANSACTIONAL_MEM.

This patch fix this issue by passing in "regs" parameter instead.

Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:12 +10:00
Colin Ian King
3daf3c2069 powerpc/32: Add missing \n and switch to pr_warn()
The message is missing a \n, add it. Switch to pr_warn(), it's shorter
and less ugly.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:11 +10:00
Aneesh Kumar K.V
ad410674f5 powerpc/mm: Update the HID bit when switching from radix to hash
Power9 DD1 requires to update the hid0 register when switching from
hash to radix.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:10 +10:00
Aneesh Kumar K.V
c6d1a767b9 powerpc/mm/radix: Use different pte update sequence for different POWER9 revs
POWER9 DD1 requires pte to be marked invalid (V=0) before updating
it with the new value. This makes this distinction for the different
revisions.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:10 +10:00
Aneesh Kumar K.V
694c495192 powerpc/mm/radix: Use different RTS encoding for different POWER9 revs
POWER9 DD1 uses RTS - 28 for the RTS value but other revisions use
RTS - 31.  This makes this distinction for the different revisions

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:09 +10:00
Aneesh Kumar K.V
7dccfbc325 powerpc/book3s: Add a cpu table entry for different POWER9 revs
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:09 +10:00
Darren Stevens
687e16bc2f powerpc/pasemi: Fix device_type of Nemo SB600 node.
The of_node for the SB600 (io-bridge) has its device_type set to
'io-bridge' Set it to 'isa' so that it can be found by
isa_bridge_find_early() instead of using patches in the kernel.

Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:08 +10:00
Darren Stevens
5024678765 powerpc/pasemi: Fix Nemo SB600 i8259 interrupts.
The device tree on the Nemo passes all of the i8259 interrupts with
numbers between 212 and 222, and points their interrupt-parent property
to the pasemi-opic, requiring custom patches to the kernel. Fix the
values so that they can be controlled by the generic ppc i8259 code.

Signed-off-by: Darren Stevens <darren@stevens-zone.net>
[mpe: Rework deeply nested if and boundary checks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-13 17:37:08 +10:00