Commit graph

127,691 commits

Author SHA1 Message Date
David Hildenbrand
0f7f848915 s390/mm: fix races on gmap_shadow creation
Before any thread is allowed to use a gmap_shadow, it has to be fully
initialized. However, for invalidation to work properly, we have to
register the new gmap_shadow before we protect the parent gmap table.

Because locking is tricky, and we have to avoid duplicate gmaps, let's
introduce an initialized field, that signalizes other threads if that
gmap_shadow can already be used or if they have to retry.

Let's properly return errors using ERR_PTR() instead of simply returning
NULL, so a caller can properly react on the error.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:28 +02:00
David Hildenbrand
998f637cc4 s390/mm: avoid races on region/segment/page table shadowing
We have to unlock sg->guest_table_lock in order to call
gmap_protect_rmap(). If we sleep just before that call, another VCPU
might pick up that shadowed page table (while it is not protected yet)
and use it.

In order to avoid these races, we have to introduce a third state -
"origin set but still invalid" for an entry. This way, we can avoid
another thread already using the entry before the table is fully protected.
As soon as everything is set up, we can clear the invalid bit - if we
had no race with the unshadowing code.

Suggested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:27 +02:00
David Hildenbrand
a9d23e71d7 s390/mm: shadow pages with real guest requested protection
We really want to avoid manually handling protection for nested
virtualization. By shadowing pages with the protection the guest asked us
for, the SIE can handle most protection-related actions for us (e.g.
special handling for MVPG) and we can directly forward protection
exceptions to the guest.

PTEs will now always be shadowed with the correct _PAGE_PROTECT flag.
Unshadowing will take care of any guest changes to the parent PTE and
any host changes to the host PTE. If the host PTE doesn't have the
fitting access rights or is not available, we have to fix it up.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:19 +02:00
David Hildenbrand
eea3678d43 s390/mm: flush tlb of shadows in all situations
For now, the tlb of shadow gmap is only flushed when the parent is removed,
not when it is removed upfront. Therefore other shadow gmaps can reuse the
tables without the tlb getting flushed.

Fix this by simply flushing the tlb
1. Before the shadow tables are removed (analogouos to other unshadow functions)
2. When the gmap is freed and therefore the top level pages are freed.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:18 +02:00
Martin Schwidefsky
aa17aa57cf s390/mm: add kvm shadow fault function
This patch introduces function kvm_s390_shadow_fault() used to resolve a
fault on a shadow gmap. This function will do validity checking and
build up the shadow page table hierarchy in order to fault in the
requested page into the shadow page table structure.

If an exception occurs while shadowing, guest 2 has to be notified about
it using either an exception or a program interrupt intercept. If
concurrent unshadowing occurres, this function will simply return with
-EAGAIN and the caller has to retry.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:12 +02:00
Martin Schwidefsky
4be130a084 s390/mm: add shadow gmap support
For a nested KVM guest the outer KVM host needs to create shadow
page tables for the nested guest. This patch adds the basic support
to the guest address space (gmap) code.

For each guest address space the inner KVM host creates, the first
outer KVM host needs to create shadow page tables. The address space
is identified by the ASCE loaded into the control register 1 at the
time the inner SIE instruction for the second nested KVM guest is
executed. The outer KVM host creates the shadow tables starting with
the table identified by the ASCE on a on-demand basis. The outer KVM
host will get repeated faults for all the shadow tables needed to
run the second KVM guest.

While a shadow page table for the second KVM guest is active the access
to the origin region, segment and page tables needs to be restricted
for the first KVM guest. For region and segment and page tables the first
KVM guest may read the memory, but write attempt has to lead to an
unshadow.  This is done using the page invalid and read-only bits in the
page table of the first KVM guest. If the first guest re-accesses one of
the origin pages of a shadow, it gets a fault and the affected parts of
the shadow page table hierarchy needs to be removed again.

PGSTE tables don't have to be shadowed, as all interpretation assist can't
deal with the invalid bits in the shadow pte being set differently than
the original ones provided by the first KVM guest.

Many bug fixes and improvements by David Hildenbrand.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:04 +02:00
Martin Schwidefsky
6ea427bbbd s390/mm: add reference counter to gmap structure
Let's use a reference counter mechanism to control the lifetime of
gmap structures. This will be needed for further changes related to
gmap shadows.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:53:59 +02:00
Martin Schwidefsky
b2d73b2a0a s390/mm: extended gmap pte notifier
The current gmap pte notifier forces a pte into to a read-write state.
If the pte is invalidated the gmap notifier is called to inform KVM
that the mapping will go away.

Extend this approach to allow read-write, read-only and no-access
as possible target states and call the pte notifier for any change
to the pte.

This mechanism is used to temporarily set specific access rights for
a pte without doing the heavy work of a true mprotect call.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:46:49 +02:00
Martin Schwidefsky
8ecb1a59d6 s390/mm: use RCU for gmap notifier list and the per-mm gmap list
The gmap notifier list and the gmap list in the mm_struct change rarely.
Use RCU to optimize the reader of these lists.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:46:49 +02:00
Martin Schwidefsky
414d3b0749 s390/kvm: page table invalidation notifier
Pass an address range to the page table invalidation notifier
for KVM. This allows to notify changes that affect a larger
virtual memory area, e.g. for 1MB pages.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:46:48 +02:00
Olof Johansson
856dfb0ccd This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
   the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
   the AHCI controller and SATA PHY drivers
 
 - Florian removes the bcm_defconfig file which is no longer useful and updates
   multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
   Broadcom Kona platforms
 
 Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
 AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
 proof
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY1BGAAoJEIfQlpxEBwcEkkgQAITurehP8Wbt0aBSt42OUmCP
 xvBTuecYkDeoZCTAT3QxfLt2f6aXHWxhl1c4nbnEF3bHqSvwDN1d4QjORC2vNN/j
 4pfLXwRN2wpWk40j7ee3rrJVM2iYyHyfa1qY3cBUD11rtBFWTX0DTvevbG9jUvsL
 dqfV51QHXAbod0L7QZKAmBmjQsjpBjDOfdrxULad0wJcOpIImDc1ynKV1PPd5hOw
 SFTyQe2rtNmhoIiLThwA694upfxPxguz6SlWZo503n6vMoF5U/z51EGne9scTTxi
 kjATpQAuYWakN3qD1AeT8oHm4/Mq5vMLqvjyRLrxlDCkrQp4UliLPEzwGIhB0BU+
 sBcmWhLieuYaR09in46wkuBbiWXGR6vh5TkN2MIlV61Y6Q99YUumTUiDO8d3fKus
 DqdPXACxpM9FoP4I/HniOMdl4FXInBqq3Ec/rBCb5fbsyxbO+FgxRBZkvZmoTouO
 6ZRIx/opi1GzW8te1hZvdzzL9uJaWFDXwnpehhQk9xlYz66R2u06lWsDsLt45DnE
 5vujTQcst6PtmqrKwehkqPDIgYRIuU1T66wPzIeMQyiF3yD/cpx+8b5j/lye8Kh+
 TaZTeCh4susttrVjhee68asFAnXpNSpwm61tNVIiypFhvrvPCLKOL0YETo/wwIJt
 AgJ92oi9NxNT4LDVdeni
 =vr6G
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig

This pull request contains defconfig changes for Broadcom ARM-based SoCs:

- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
  the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
  the AHCI controller and SATA PHY drivers

- Florian removes the bcm_defconfig file which is no longer useful and updates
  multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
  Broadcom Kona platforms

Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof

* tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux:
  ARM: Remove bcm_defconfig
  ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
  ARM: multi_v7_defconfig: Enable Broadcom STB PWM
  ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
  ARM: multi_v7_defconfig: Enable Broadcom AHCI
  ARM: multi_v7_defconfig: Enable BRCMSTB networking
  ARM: multi_v7_defconfig: Enable BCM63xx

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:52:37 -07:00
Olof Johansson
7a4fad480d This pull request contains Device Tree changes for Broadcom ARM64-based SoCS:
- Anup adds nodes for the AHCI and SATA3 PHY peripherals to the Northstar2 SoCs
 
 - Dhanajay enables pinctrl for the Northstar2 SoCs
 
 - Jon Mason enables all of the UART peripherals found in the NS2 SVK and
   finally adds the CCI-400 and PMU nodes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY1QtAAoJEIfQlpxEBwcEOk4QAObsEiL/mCR0mx/6+QC0kivU
 LRrfHKKkMOjpvGZaY9I19CW3toWZB5Nr7B8FtsEQf/Nwp35ug4e0ajPw52DGuvyU
 1xhWHwQ7rIPP9FU3/1wHZ1Na26m9GeN1RAr7ljHCymOaK0yyFNWvP6GQs1ZyYZsf
 kc4NjRU4gckNi5ouYtdPM5DtU1OGeXk4jesX8PEZJ/C4DxhIpIod6pgZRmxxw6p8
 6MLra/ZccNHsSUoc0OV66GYLc02TRNGejB9vIVNl6QyoNabsEWRXMNEdM0Zn9i80
 nF8kZvwYS1333wS1p5RilwFMOfE2qF0MzYFnwDgOqdk0D7ugoEE/Y1lYolce2u1p
 rTdf3y4QpRnRWAf+SwcGcJZE4XZ6kY19qBfvGv3kbRKnPTVMVME+w7vYQdGyPcMz
 jxgU1gaAqK/nHoCnOuh0GoP5PROlJOLXyC2ivRUehsnfg+0U6XU+jjtj9H5cnq20
 ZQSv8uwqeppu7uPyh3BChrc1Zm78fUQRYcqOvtJkrttub+oeVN/tWIIkUu9t1m89
 vBJe3zixuN/EghMn85sLimB+yEu7ETTujgvGtbp6Wp7ku5+7RbDJy+QlbdDZho8K
 JYfLq2kCW6KBrrIXyrvYrbTv/vys5bFaZ88XcHYNs657xVR+rxUov8O9jvNEqbxp
 qSrWCfaMyLqOV1VCrf5s
 =296G
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.8/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64

This pull request contains Device Tree changes for Broadcom ARM64-based SoCS:

- Anup adds nodes for the AHCI and SATA3 PHY peripherals to the Northstar2 SoCs

- Dhanajay enables pinctrl for the Northstar2 SoCs

- Jon Mason enables all of the UART peripherals found in the NS2 SVK and
  finally adds the CCI-400 and PMU nodes

* tag 'arm-soc/for-4.8/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: NS2: Add CCI-400 PMU support
  arm64: dts: NS2: Add all of the UARTs
  arm64: dts: Enable GPIO for Broadcom NS2 SoC
  arm64: dts: enable pinctrl for Broadcom NS2 SoC
  arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2
  dt-bindings: ata: add compatible string for iProc AHCI controller

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:48:17 -07:00
Olof Johansson
be6e3f3160 This pull request contains Device Tree changes for Broadcom ARM-based SoCs:
- Chris provides documentation and DTS fixes for the bcm11351 CPU enable-method in preparation
   for adding support for the BCM23550 SoC and its corresponding documentation, SoC dtsi
   and the Sparrow board DTS file
 
 - Jon adds MSI support to the PCI nodes, updates the secondary cores boot address for the B0
   production revision of the Northstar Plus SoC, adds a DTS for the BCM958625HR board, another
   one for the BCM958525XMC board, and finally adds the PL330 DMA controller to the NSP DTS
 
 - Rafal enables the SPI NOR flash on dual flash systems (NAND + SPI) on the BCM5301x SoCs
   and devices
 
 - Florian adds support for the BCM5301x built-in Ethernet switch by adding nodes for the
   Gigabit MAC controllers and the Switch Register Access block, and finally updates the
   SmartRG SR-400AC board with its switch port layout
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY1hBAAoJEIfQlpxEBwcEY6gQAKRAF/CK920lh6BeW0JKgzix
 L1J2TBirqYv/yRB0hiBY9myh61yV31SgCksgJbJrOREWTJMxx8lLve3jnCqVdzd+
 ODfgb2QLGgQJZfLFaK2JHxY8NkgrrABkNEb7kIv+MCes3FrtBJHtH02y661w5goB
 t5zJyvz9FeIQJULFv9jNyVpa+A7Hy8jg1Wvin62mF7uXewFEr9kcddbeXsmRw/EB
 j491pFNDw4lkYecyMWyb5c4QqJEtVWIFWxCFRDf4OvG3JhzvMWfyNfhSm9t4nPUU
 pxadZsnVrPPYBQq5QC0zC5bSBCZHRgTt+JsXAl557rAGePuPSKTennri3ubxwQbi
 9w8PevstBXKq0J6Ynl0lrqLAUrLbnt57bq49hxMM7ur0CXGL5CdzRKRkiUme4ZsB
 G5shPXsYlfpCwjAvthshb1npreUxTyxQkO6D6y3Zojb/tlNrwBvV3QmqC8Lpe4wm
 7J/hznwOUyhgm+IR92tSL+nyFd8gqOBAHOipUNDTQGix2BuYveAngh0I7lysVvQt
 E47UAc6+y6IHt7iNbubZVfJ6HQnu5EZPoPwoev0/2Xbr0Bd7wBYshAYnVynkj0lf
 9v47CYKNvaYDzXSacpxodA+iZMVgkGrRzoyMskaqzPgcBCnMiQeVLuivrUerx1in
 yYxPjRCv+QMd1qbv3K4+
 =0GWx
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.8/devicetree' of http://github.com/Broadcom/stblinux into next/dt

This pull request contains Device Tree changes for Broadcom ARM-based SoCs:

- Chris provides documentation and DTS fixes for the bcm11351 CPU enable-method in preparation
  for adding support for the BCM23550 SoC and its corresponding documentation, SoC dtsi
  and the Sparrow board DTS file

- Jon adds MSI support to the PCI nodes, updates the secondary cores boot address for the B0
  production revision of the Northstar Plus SoC, adds a DTS for the BCM958625HR board, another
  one for the BCM958525XMC board, and finally adds the PL330 DMA controller to the NSP DTS

- Rafal enables the SPI NOR flash on dual flash systems (NAND + SPI) on the BCM5301x SoCs
  and devices

- Florian adds support for the BCM5301x built-in Ethernet switch by adding nodes for the
  Gigabit MAC controllers and the Switch Register Access block, and finally updates the
  SmartRG SR-400AC board with its switch port layout

* tag 'arm-soc/for-4.8/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC
  ARM: dts: BCM5301X: Add SRAB interrupts
  ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
  ARM: dts: NSP: Add PL330 support
  ARM: dts: NSP: Add XMC board support
  ARM: dts: bcm23550: Add device tree files
  Documentation: devicetree: Document BCM23550 bindings
  ARM: BCM5301X: Enable SPI-NOR on dual flash devices
  ARM: dts: NSP: Add new DT file for bcm958625hr
  ARM: dts: NSP: modify second CPU address
  ARM: dts: NSP: Add MSI support on PCI
  ARM: BCM: modify Broadcom CPU enable method
  ARM: dts: fix use of bcm11351 enable method
  Documentation: Binding docs for bcm11351 enable method

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:45:47 -07:00
Olof Johansson
cfa999ef5b This pull request contains SoC changes for Broadcom ARM64-based SoCs:
- Kamlakant updates the Broadcom Vulcan Kconfig entry with GPIOLIB to enable
   GPIO on these platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY1ZeAAoJEIfQlpxEBwcEtosP/1DjcxRFQrpVmOkLyMU6lR9h
 gTbV47sRNIw+kWSGU6yqtWfQybIUI3CDdQOZFcsYc4rd26YpSO9cszB2dYjoC3a+
 11xJPj2MjUdIyNEBHC8LuN1X+SZKxVvgcXD9rJ3GEKHbFW5vwKXfM0TFBOQClWME
 2YE5Ucr+LE4CmXzPiw16lqsdaU33ea5ZKwk6+RXJHxBNTGiYe7mEZ7FJuAsX/dzd
 pzqk3VgrpmhxHrWLfDyDfogR5dz+FrfX7acw4IfFyLwTK9LC/B7luG/lfnO622Ym
 xJ+1dRnB/qj1TcO8hQtZck+rEZbL9yerQ+Lh3MTrZEUVbBTIXQ0NWP57xvSL3Zge
 VfspJTgyxfLIpiiHVCbPmA+tCIogm1PKN8JRH+YVUgR67MAEWkt7JACgrMUrHwY4
 aXVNnDcfPglqJrA/K7o5kpKSgkVSTDL2Wq5t9ao8PrURVNfag0nk3c+nzhkQCtmZ
 2NmvisYRvCSkXww3cGlLiZs5CM4PLQ+UX2Ao/3j5H3DHqeYM9LqMBzPj21Z+G0Rr
 SH/XdoLlW0dLoA8FoGqBCsXXsMOWaY8hF+LFTiFcInoYsxxeezb7ILOASZk1MZng
 b27yX/9JY94AFqEH2AQWrTOf52ou7UcoV4PL+IHOALhA5ATXIbxWVUul8MW+dUHO
 aMRkaGRScNUTO7CmEwjg
 =MnRp
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.8/soc-arm64' of http://github.com/Broadcom/stblinux into next/arm64

This pull request contains SoC changes for Broadcom ARM64-based SoCs:

- Kamlakant updates the Broadcom Vulcan Kconfig entry with GPIOLIB to enable
  GPIO on these platforms

* tag 'arm-soc/for-4.8/soc-arm64' of http://github.com/Broadcom/stblinux:
  arm64: vulcan: enable GPIOLIB in Kconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:43:50 -07:00
Olof Johansson
8739a229b6 This pull request contains SoC changes for Broadcom ARM-based SoCs:
- Chris prepares support for the BCM23550 by removing reset code in the
   BCM21664 machine code since a proper drivers/power/reset driver is provided and
   shared, he then adds a machine entry point for BCM23550 and updates the SMP
   code to bring-up the secondary cores on BCM23550
 
 - Ben fixes a warning in the Kona L2 SMC code by adding the missing include file
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY1beAAoJEIfQlpxEBwcEFKYQAN0/ba6mCFmr8DLthDJkqeMt
 yrVeVRB1H6HYnt2cqaG/tbEeZZ+d+S4PhyRbHtAQ4cjgUq0qw8HNc/paN68K4pj0
 JuY/52T2mL9WY9f96VBOAnmyRGC2YjTO3xC902BHOVBqQnYzHZm/ki9nxePo8F98
 JTAsZuTR+NthfWuwFAAhI6xRws8d9jLXsirPPld6iuRo48/3UoxnHIzz+dQJghIy
 EVqXf3ckL09LYZqvY6dagcWQxR0RC80Z2hHska4uRirfmPjFKXYM6NvftKu3YaKz
 cRC0bE6t4WR7YX3LCLYWMers7rnElhfqpgvwJVvYnnwDTpc7469CF9ql2IJSM+Dj
 8DDX9pHWwNZTaHglmigIW8inaOS3ChtOb+V5nZxAsaSh5h9W99JTbpnFjqgvBZ0x
 uHHwsiv6xWDDujeD5lF6+VcVekk1WGoJ8ALaa4MBxdasljw9SyRpb3q8PWXAcbk2
 WMPBhED6OdfRuQ/Gf2466LcM1LBkd0nL5mYUZtN/py5B2xtvHgmee2H9AZQQlHhb
 DhmXpjG4gV5ySInJs30HrK1Z6iELa+hI3gouhsqCCo4Tj+EK7/yGRncUZ02tHjEk
 Tnmf3tepkX1paukYriVwLwRtuf3KkJJH5U+P4wRR/vREewbIy9iqaQFTg2IZUJr9
 Mh4vZRnzjw0Qgjy0M4Dj
 =zoLK
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.8/soc' of http://github.com/Broadcom/stblinux into next/soc

This pull request contains SoC changes for Broadcom ARM-based SoCs:

- Chris prepares support for the BCM23550 by removing reset code in the
  BCM21664 machine code since a proper drivers/power/reset driver is provided and
  shared, he then adds a machine entry point for BCM23550 and updates the SMP
  code to bring-up the secondary cores on BCM23550

- Ben fixes a warning in the Kona L2 SMC code by adding the missing include file

* tag 'arm-soc/for-4.8/soc' of http://github.com/Broadcom/stblinux:
  ARM: bcm: fix missing include of kona_l2_cache.h
  ARM: BCM23550 SMP support
  ARM: Add support for Broadcom BCM23550 SoC
  ARM: bcm21664: Remove reset code

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:42:25 -07:00
Olof Johansson
d41bde8818 Topic branch for Exynos MFC changes for v4.8:
Pull s5p-mfc changes from media tree so the arm/mach-exynos code
 could be removed. The bindings are converted to generic reserved memory
 bindings.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXVWQ8AAoJEME3ZuaGi4PXGWIP/3FwCkH8XNJIDLGZ/RJq/b1+
 YI9ixVOW9E3vdDgk3I3vLG+jL6bUVicJSS47L/DscN4CyNml6YNaNa+RJdB2pw+E
 hJJ3tcGz04jCLvk6+6abLEfpfPC40DkDVj7ZOKjzWypZYDFyjB018p2DECzc+RFf
 zVlY8P9OKeaBMZNCk2H2cT46NLTgL4dY3KR8y5TLUHsgYLVdLmU4QtCv/RiRnTcn
 OuzBTyLvVR97lup1mVf7zhE2OLkyskishKbYbMuD1I8flho22y4vJG998zSIIl5C
 Tz8MYJsVN1mFEjonJcbreNTAe4LB++F8tXcytCADHSGM2O9m04HeROdqqKUiPWrw
 hAG6DS+tVq7FqGBii3IlfTg08AG8uNoOzJ14Qc1BmcgEPlkpLMNHKgdNgzvJx7VB
 yukGUVUDBQTM19q1QwH3keIRfOWm030ODA/q24ExUVZ8TgWdjLWIz5/U2jyV4aph
 TKtwcruFXpCVwQ6gXWTyVb95Fre4miONqFRTOFWk1lbXDEk9fM8qL1ih4OUzKM5m
 khSNfAMeKHKxkXHSzsU9PBZp66jeqdQQIv6i2fnZhk4OMqYDz5iTTRGV+LaPkrQ+
 1Jz1VZ+0iKka30x/LhKtOlRuq6rPlIaXyPHrr/POfETVv3eG4OKTQJzVfX++tNCw
 CdJKxIKlT0lZtuwg0BWu
 =bfnE
 -----END PGP SIGNATURE-----

Merge tag 'samsung-drivers-exynos-mfc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Topic branch for Exynos MFC changes for v4.8:
Pull s5p-mfc changes from media tree so the arm/mach-exynos code
could be removed. The bindings are converted to generic reserved memory
bindings.

* tag 'samsung-drivers-exynos-mfc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Enable MFC device on Exynos4412 Odroid boards
  ARM: dts: exynos: Convert MFC device to generic reserved memory bindings
  ARM: EXYNOS: Remove code for MFC custom reserved memory handling
  media: s5p-mfc: add iommu support
  media: s5p-mfc: replace custom reserved memory handling code with generic one
  media: s5p-mfc: use generic reserved memory bindings
  of: reserved_mem: add support for using more than one region for given device
  media: set proper max seg size for devices on Exynos SoCs
  media: vb2-dma-contig: add helper for setting dma max seg size
  s5p-mfc: Fix race between s5p_mfc_probe() and s5p_mfc_open()
  s5p-mfc: Add release callback for memory region devs
  s5p-mfc: Set device name for reserved memory region devs

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:39:15 -07:00
Olof Johansson
4fb92c60eb Amlogic DT 64-bit changes for v4.8
- add pinctrl driver and pins for several devices
 - add reset driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXYGq/AAoJEFk3GJrT+8ZlqYMP/3YG+227gYXrWn9wHNurvj7v
 AMKYX0tsHZT+r4JYVimUmGN6//SGVIHuWpIoS4LUIdeh9uJg9xCE1rHYICGvv5eh
 DyFpty3oMxwV++U3H13axDuzQBTDQsmIz3vquusif1Paq9ncR806M1y7ZQIr4yUm
 UbmEKGxQqo/rCLSoIuSUAZjGLneJx+ixsGIiWBICwDz9tAzDcElr9tpTbJptoF5U
 7QRzhv/NdPcyxNE092U+hFvCWrABnBdiicdFIrnoExXtR0zvC4JcNpFvPLHfUgqg
 mjn4NxiSTidexVxuri5mI8uJnj++5ejEp0TQvp6MT+R7kbhovL2SbmiNqt3Gds1D
 T5jkcWz+Ow3tZobmp7CQX/oiCUTy81kAQ6+VCYPu+NUKZeyiMFs2SRF1s3wOxZU/
 6nFi6JpazCe9j5CwJC+TPxflUNb7mNheARpi0ZDxCA5Q/TVA42wASO69iG8+gipX
 X79a6uIRoVuFJcOYFhPRvtXBjQqG75RV21uBgDMryK4+sT9IF7bKbwQl9pHTFWU0
 Xg2VDhaX5u9vGxJLxjcL/e0kM2vGEi9DuhoxMGywFAcGYwoBM5CH2GW8Ok6FEgO1
 1EHq917VPbazzLIxVldm0FHBqg6aeA4Ps24m+8TNgw6sG2JSTiyI/9lZx/A6FHGC
 AU5efPPy2nPROcrrHP6c
 =SyuX
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic DT 64-bit changes for v4.8
- add pinctrl driver and pins for several devices
- add reset driver

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms
  ARM64: dts: amlogic: gxbb: add ethernet
  ARM64: dts: amlogic: gxbb: pinctrl: add/update UART
  ARM64: dts: amlogic: add pins for EMMC, SD
  ARM64: dts: amlogic: Enable pin controller on GXBB-based platforms
  documentation: Add compatibles for Amlogic Meson GXBB pin controllers
  ARM64: dts: amlogic: Add hiu and periphs buses

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:30:16 -07:00
Olof Johansson
00d624dcb9 Amlogic DT changes for v4.8
- add reset driver for meson8b
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXYGsvAAoJEFk3GJrT+8ZlxFgP/RmOeXE+vIYrxydjmYObLXEk
 Yh6lJSuFuZZupuBYeN2z5kophPv0ADJuXDEHKK/qQ95bKjueI5CaAToSyIW2UnBG
 ZmZ4DDz3pS79/F0EV4aK2KOt1ef9NhvfCjOk2raJwPwdXuh+A+p1wrTA8xTYFzHp
 Iac9fE3d1pnCr4tKo3K/u6dFYHUA5SwRhkMtu7SG9tfd8RZ03fJrDAA+PWTVk8+m
 5FAIVu0h5ijHvQMyxXNJxEjwJJwvrqDEnsAcxgYx7CIK/MJdVfFa3JyW3yaFFgos
 VeGE3DDbGqAf+q1Hz6vgFJ2GjbBDcq71z5CIO5nawa1FhoTwM9QEnLUKOI/CX/8O
 lyDBDUSfAhumbiOFyWsQhnBfU+msM6GduvMvYzHq7t7TdOQptDKc+0mznoJgXuQD
 7RTCn74E/o47f8Lmrl3WXLt7Xk4JXrrx2qkXYJ9SmofdyWq4qaEzHbDbhA7GWNDh
 ogMZkHPuMarO32qZ9xL05PqpMzyFVVJzFMmQ21ynE43svw0751+ReOLbnO9zHF85
 kZHuzch8tvt7h2AJzV/OrPMY+dwSwZ5+GuAeDTDNrruxqFzfXIUNRglbiZ4sVMIL
 m81xAzB8dDThRzkG0wKIEyXFMOPdxpkscd9ssmy4slrMpuAh/frj0QPvlXUXBarw
 FLG92wS0nA2OSXWxkr6P
 =iBxd
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic DT changes for v4.8
- add reset driver for meson8b

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: amlogic: Enable Reset Controller on Meson8b platforms

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:29:47 -07:00
Mahesh Salgaonkar
fd7bacbca4 KVM: PPC: Book3S HV: Fix TB corruption in guest exit path on HMI interrupt
When a guest is assigned to a core it converts the host Timebase (TB)
into guest TB by adding guest timebase offset before entering into
guest. During guest exit it restores the guest TB to host TB. This means
under certain conditions (Guest migration) host TB and guest TB can differ.

When we get an HMI for TB related issues the opal HMI handler would
try fixing errors and restore the correct host TB value. With no guest
running, we don't have any issues. But with guest running on the core
we run into TB corruption issues.

If we get an HMI while in the guest, the current HMI handler invokes opal
hmi handler before forcing guest to exit. The guest exit path subtracts
the guest TB offset from the current TB value which may have already
been restored with host value by opal hmi handler. This leads to incorrect
host and guest TB values.

With split-core, things become more complex. With split-core, TB also gets
split and each subcore gets its own TB register. When a hmi handler fixes
a TB error and restores the TB value, it affects all the TB values of
sibling subcores on the same core. On TB errors all the thread in the core
gets HMI. With existing code, the individual threads call opal hmi handle
independently which can easily throw TB out of sync if we have guest
running on subcores. Hence we will need to co-ordinate with all the
threads before making opal hmi handler call followed by TB resync.

This patch introduces a sibling subcore state structure (shared by all
threads in the core) in paca which holds information about whether sibling
subcores are in Guest mode or host mode. An array in_guest[] of size
MAX_SUBCORE_PER_CORE=4 is used to maintain the state of each subcore.
The subcore id is used as index into in_guest[] array. Only primary
thread entering/exiting the guest is responsible to set/unset its
designated array element.

On TB error, we get HMI interrupt on every thread on the core. Upon HMI,
this patch will now force guest to vacate the core/subcore. Primary
thread from each subcore will then turn off its respective bit
from the above bitmap during the guest exit path just after the
guest->host partition switch is complete.

All other threads that have just exited the guest OR were already in host
will wait until all other subcores clears their respective bit.
Once all the subcores turn off their respective bit, all threads will
will make call to opal hmi handler.

It is not necessary that opal hmi handler would resync the TB value for
every HMI interrupts. It would do so only for the HMI caused due to
TB errors. For rest, it would not touch TB value. Hence to make things
simpler, primary thread would call TB resync explicitly once for each
core immediately after opal hmi handler instead of subtracting guest
offset from TB. TB resync call will restore the TB with host value.
Thus we can be sure about the TB state.

One of the primary threads exiting the guest will take up the
responsibility of calling TB resync. It will use one of the top bits
(bit 63) from subcore state flags bitmap to make the decision. The first
primary thread (among the subcores) that is able to set the bit will
have to call the TB resync. Rest all other threads will wait until TB
resync is complete.  Once TB resync is complete all threads will then
proceed.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-06-20 14:11:25 +10:00
Mahesh Salgaonkar
6dd06d15a8 powerpc/powernv: Remove the usage of PACAR1 from opal wrappers
OPAL_CALL wrapper code sticks the r1 (stack pointer) into PACAR1 purely
for debugging purpose only. The power7_wakeup* functions relies on stack
pointer saved in PACAR1. Any opal call made using opal wrapper (directly
or in-directly) before we fall through power7_wakeup*, then it ends up
replacing r1 in PACAR1(r13) leading to kernel panic. So far we don't see
any issues because we have never made any opal calls using OPAL wrapper
before power7_wakeup*. But the subsequent HMI patch would need to invoke
C calls during cpu wakeup/idle path that in-directly makes opal call using
opal wrapper. This patch facilitates the subsequent HMI patch by removing
usage of PACAR1 from opal call wrapper.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-06-20 14:11:25 +10:00
Thomas Huth
b69890d18f KVM: PPC: Book3S PR: Fix contents of SRR1 when injecting a program exception
vcpu->arch.shadow_srr1 only contains usable values for injecting
a program exception into the guest if we entered the function
kvmppc_handle_exit_pr() with exit_nr == BOOK3S_INTERRUPT_PROGRAM.
In other cases, the shadow_srr1 bits are zero. Since we want to
pass an illegal-instruction program check to the guest, set
"flags" to SRR1_PROGILL for these other cases.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-06-20 14:11:25 +10:00
Thomas Huth
708e75a3ee KVM: PPC: Book3S PR: Fix illegal opcode emulation
If kvmppc_handle_exit_pr() calls kvmppc_emulate_instruction() to emulate
one instruction (in the BOOK3S_INTERRUPT_H_EMUL_ASSIST case), it calls
kvmppc_core_queue_program() afterwards if kvmppc_emulate_instruction()
returned EMULATE_FAIL, so the guest gets an program interrupt for the
illegal opcode.
However, the kvmppc_emulate_instruction() also tried to inject a
program exception for this already, so the program interrupt gets
injected twice and the return address in srr0 gets destroyed.
All other callers of kvmppc_emulate_instruction() are also injecting
a program interrupt, and since the callers have the right knowledge
about the srr1 flags that should be used, it is the function
kvmppc_emulate_instruction() that should _not_ inject program
interrupts, so remove the kvmppc_core_queue_program() here.

This fixes the issue discovered by Laurent Vivier with kvm-unit-tests
where the logs are filled with these messages when the test tries
to execute an illegal instruction:

     Couldn't emulate instruction 0x00000000 (op 0 xop 0)
     kvmppc_handle_exit_pr: emulation at 700 failed (00000000)

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-06-20 14:11:25 +10:00
Linus Torvalds
049a40c0a2 ARM: SoC fixes
Another batch of fixes for ARM SoC platforms. Most are smaller fixes,
 
 Two areas that are worth pointing out are:
 
 * OMAP had a handful of changes to voltage specs that caused a bit of churn,
   most of volume of change in this branch is due to this.
 
 * There are a couple of _rcuidle fixes from Paul that touch common code and
   came in through the OMAP tree since they were the ones who saw the problems.
 
 The rest is smaller changes across a handful of platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXZjf6AAoJEIwa5zzehBx3ExoP/2eGTZyGUt9DFutZs2OhZRgh
 tI3zBgfPaAEmt+rnvVE3NhDbfjPsV2cANDxE/MaZsFaKkgkHNBbmZpJ3Y7OlgB+k
 3kl4y87Ez1NEJrzQKzqVICzCD3IKA3cxUwUELIp3C7LhnKO1UXmRXp8UXee1Yc1E
 gL23Z2FncrDLOdvVfp/dTj1scB1XQrt3kePSu7sIuyDuGiPLRvO8fNjvIfOQaGDt
 Y27Yk1GrNpvqiOAkziOzUmSGZ6ZZ+wUdUKc/+QcxSnqxrSldtaQDsmmL4z6DQ1xj
 j0jagfVGXNLrCUj0zyWwwPG7pZ37BDJ1mj7AMiX9N7LDQFHR9owEVNf2zd1ar37k
 64Vlz+38m8lXNHM2/gL6gqFZIm0Kjt9C/wrvyealsuflGmx4xMSTRr2yvde5URBO
 diFzee3y2NPhvaRaEd1/yFJ/c0D5bVS8M1lced6GXn/l8SrWjg1SrYZley2PGjQH
 esEr7odTR7Um1UIXalpL1yBxoOVfGJl3bPYe8/veniFSi4DV+yeCOCc6pN0Km4WQ
 huUlzJkIXgtgAUt5gvWAw7sC+qzYPL+qOMAJsfb/vANoGg2QMrt+u9RAWnMKidpo
 GcjKNvAhAmAfwUgVHeLxO714MjIHWhKEVGkGsiDwoLCisn7HTLmaYk8qmOTlExcC
 g/nj7vtaXFfMDcD3uco0
 =C0Az
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Another batch of fixes for ARM SoC platforms.  Most are smaller fixes.

  Two areas that are worth pointing out are:

   - OMAP had a handful of changes to voltage specs that caused a bit of
     churn, most of volume of change in this branch is due to this.

   - There are a couple of _rcuidle fixes from Paul that touch common
     code and came in through the OMAP tree since they were the ones who
     saw the problems.

 The rest is smaller changes across a handful of platforms"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
  ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  ARM: OMAP2+: timer: add probe for clocksources
  ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
  memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
  arm: Use _rcuidle for smp_cross_call() tracepoints
  MAINTAINERS: Add myself as reviewer of ARM FSL/NXP
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
  ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
  ARM: imx6ul: Fix Micrel PHY mask
  ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
  ARM: dts: DRA74x: fix DSS PLL2 addresses
  ARM: OMAP2: Enable Errata 430973 for OMAP3
  ARM: dts: socfpga: Add missing PHY phandle
  ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board
  ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board
  ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator
  ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator
  ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile
  ...
2016-06-18 20:36:17 -10:00
Olof Johansson
8fd0976702 OMAP-GPMC: Fixes for for v4.7-rc cycle:
- Fix omap gpmc EXTRADELAY timing. The DT provided timings
 were wrongly used causing devices requiring extra delay timing
 to fail.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXYmsiAAoJENJaa9O+djCTGEwQAIird142noq4p13rRf8js1Vy
 1r808DkkXqF1n19UONio1oFWZEPdKmjGhdqntlR/tW83PNeSsAba+YjW3GvsisAx
 /Wf9kgOd2iCOIGqEu35/v1VQ4XR5CMMASK0SwhDRNjddj1gRikrOZLGaZ67TUzUz
 Ry2CX4qKzA6G9E/Tvgw/pzcUyRZyXPoXJDD5ACPfuAqBBocZM7NMrXw0m54kHFXm
 LDnXXW8XVw4um/68IKZzcscSe1hOoSKjd0IFbVvR4PVmrl4ed5iDsvjHE3NL/oqT
 nyeLQSeSnT2tLcSG1/sl78eaTbTMfAR1s3jR87PMkxe7p9ya3QBVI60xuD2Awna5
 HR/ZjZXnkLHeTfGnhaB7uKeZDan+RrUI88bGxO42HKFMthUCZI0siH04c4DFdTQS
 pmhrk6CQLgPCb93j0xdyZBNm+MH8PKEARLQ2SucTDo4R9eIe96tnQMHXZRnbZm7h
 +VM2kTwOaAgrDbkfyyS3o/E1KKMR7NZa59pb3SD7m9KbKQGr8Q8O9xijPS5XT03d
 9fxqATGc1G4n/Qwp6yu6Qkf7uxCNwzmjSySMiavH3kryHqNXR5TZJ8Zt6itgeSWb
 ko/pLjvbSt+yrHU93Hr4rntczJykyxrC9maza4b4YIm6MWwSXGH41uAO140NGelG
 QFJdeXNA1ybqY7KbwyaR
 =c0F/
 -----END PGP SIGNATURE-----

Merge tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux into fixes

OMAP-GPMC: Fixes for for v4.7-rc cycle:

- Fix omap gpmc EXTRADELAY timing. The DT provided timings
were wrongly used causing devices requiring extra delay timing
to fail.

* tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
  + Linux 4.7-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-18 22:59:07 -07:00
Olof Johansson
58935f24a9 Fixes for omaps for v4.7-rc cycle:
- Fix dra7 for hardware issues limiting L4Per and L3init power domains
   to on state. Without this the devices may not work correctly after
   some time of use because of asymmetric aging. And related to this,
   let's also remove the unusable states.
 
 - Always select omap interconnect for am43x as otherwise the am43x
   only configurations will not boot properly. This can happen easily
   for any product kernels that leave out other SoCs to save memory.
 
 - Fix DSS PLL2 addresses that have gone unused for now
 
 - Select erratum 430973 for omap3, this is now safe to do and can
   save quite a bit of debugging time for people who may have left
   it out.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXXm6cAAoJEBvUPslcq6VzgiAP/3j+Zvaks93gLf0Hc1sQ5ow+
 UxQ3Gb3/gVGEh1OSb/c4MI800UBK1B0f6CqLK7zDFAuDHyUwmqJ27nrARfazoMPD
 DxRYZoEs897peB0/SWwDtHR+yje5UmIB0P31kRJ+t5nYwXBKvmvkWPFrOISxgI1Z
 yLc62tFoVy37IYfeH6pRNwMyJz9scl4qXjiBCHTmBQvgo4I3IPpvhFAWN5YMBZlz
 VwXDtmR9B/WlcRYel+RplYQrQrXVvaaT01wTPfejKHI9dyNQmbJQDWFMuuvdQKjE
 O7yjcgR6DdWjdDwCmIHLuc2FyrwW+wt1AY/5UXKGroxfW6Ct3JKuhUPPxsHfRMKX
 2NnQtgUcUxiIAGrsEZFadUAIEedd+DBVK+aztn1reaaHR1R/pBnMcEnch9WRuAOQ
 srOaaL2Had/NG+QRE0psgck9ayzpDHw+LMd18BckCN+1mIiFBnXYZrCVUPrutgPP
 5RbDWIeSVeAwbdaxPRqkXOcMGZ1MDRGoS+UBlTms+gWuSLjFj6sye0+Dao+68Ehz
 im/xhh0YCHgN0TvuvTla5BgLgOunlCNtXMNWyg801lDIvzOj/ngEQlasng9uzuri
 mfGf5w8ctub0Ileq4eU+rYb+bRDiDagjmiVBjbRmLWtgOUcsrNr+FX9sp5NDELmS
 oEa/VB8jNmI3aSv6OrNi
 =mQyc
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.7-rc cycle:

- Fix dra7 for hardware issues limiting L4Per and L3init power domains
  to on state. Without this the devices may not work correctly after
  some time of use because of asymmetric aging. And related to this,
  let's also remove the unusable states.

- Always select omap interconnect for am43x as otherwise the am43x
  only configurations will not boot properly. This can happen easily
  for any product kernels that leave out other SoCs to save memory.

- Fix DSS PLL2 addresses that have gone unused for now

- Select erratum 430973 for omap3, this is now safe to do and can
  save quite a bit of debugging time for people who may have left
  it out.

* tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
  ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
  ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
  ARM: dts: DRA74x: fix DSS PLL2 addresses
  ARM: OMAP2: Enable Errata 430973 for OMAP3
  + Linux 4.7-rc2

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-18 22:57:48 -07:00
Olof Johansson
9503427e91 Fixes for omaps for v4.7-rc cycle:
- Two boot warning fixes from the RCU tree that should have gotten
   merged several weeks ago already but did not because of issues
   with who merges them. Paul has now split the RCU warning fixes into
   sets for various maintainers.
 
 - Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes
 
 - Fix PM for omap3 boards using timer12 and gptimer, like the
   original beagleboard
 
 - Fix hangs on am437x-sk-evm by lowering the I2C bus speed
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY8wuAAoJEBvUPslcq6VzGBQQAJ6OIH0Gws19Wyi8IqnjMLJN
 npu+JXU0xP5bBZ+HbCVjyN8k32drhXdwDMQ+u1DvBYwUuyLIIRZPZF4aHb8fDfOC
 v1VqUzQRzj1FCh9MlkdqTedA180WCo5PCGlFOon0BmaZlv9WevEaTOYrEgyZPrmk
 quBnaE+baZfGxWBbDSN+OrGYobQRs7Eu8bel0gh628CDiajrbwlIyAcNdEn5C/Uu
 GHiEuIQcxb4b62mwAwh/t7el9ureirsS1b6mFB41puPmF/lYawI6YaCWIL48lbMd
 XsgKGnFDU6dgSO5QRx5PhP/7YP9FetS0U+g7iFhgjmArNCraNQYBY0ltMweOG0qe
 M8BPxDuCnhm1Q+PcjBORteN/PF47kcnBMpiJVVTmq5JRlXUqXecKpoScCt9HfPgy
 EJq+esLQNIuRw9cEwVPQBj80GyxFUVqL/Rzo7xjEwTDPYRQERGCB7V68iV25on3w
 07dOVl/lSwe902ik580wnlGUq+J09wk+9hIKV2XwQAV/8mKaWMc3pA8rE/efLJoC
 buAsccxVcEsR3+uLSsU/P+fFm8nfBRmiOO9yIR4gez0BhbiDMc1zpwwhLkI+vTT4
 D3PnuUdVeBvoGTNnpwqSURxajhaK0DSKTwhWnWGubYfXd3B48sW76rvKLO1FThgL
 qyaed06QFeWj8gV+VZLb
 =P0Vi
 -----END PGP SIGNATURE-----

Merge tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.7-rc cycle:

- Two boot warning fixes from the RCU tree that should have gotten
  merged several weeks ago already but did not because of issues
  with who merges them. Paul has now split the RCU warning fixes into
  sets for various maintainers.

- Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes

- Fix PM for omap3 boards using timer12 and gptimer, like the
  original beagleboard

- Fix hangs on am437x-sk-evm by lowering the I2C bus speed

* tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  ARM: OMAP2+: timer: add probe for clocksources
  ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
  arm: Use _rcuidle for smp_cross_call() tracepoints
  arm: Use _rcuidle tracepoint to allow use from idle

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-18 22:21:52 -07:00
Lee Jones
0e289e534a ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
This patch fixes a non-booting issue in Mainline.

When booting with a compressed kernel, we need to be careful how we
populate memory close to DDR start.  AUTO_ZRELADDR is enabled by default
in multi-arch enabled configurations, which place some restrictions on
where the kernel is placed and where it will be uncompressed to on boot.

AUTO_ZRELADDR takes the decompressor code's start address and masks out
the bottom 28 bits to obtain an address to uncompress the kernel to
(thus a load address of 0x42000000 means that the kernel will be
uncompressed to 0x40000000 i.e. DDR START on this platform).

Even changing the load address to after the co-processor's shared memory
won't render a booting platform, since the AUTO_ZRELADDR algorithm still
ensures the kernel is uncompressed into memory shared with the first
co-processor (0x40000000).

Another option would be to move loading to 0x4A000000, since this will
mean the decompressor will decompress the kernel to 0x48000000. However,
this would mean a large chunk (0x44000000 => 0x48000000 (64MB)) of
memory would essentially be wasted for no good reason.

Until we can work with ST to find a suitable memory location to
relocate co-processor shared memory, let's disable the shared memory
nodes.  This will ensure a working platform in the mean time.

NB: The more observant of you will notice that we're leaving the DMU
shared memory node enabled; this is because a) it is the only one in
active use at the time of this writing and b) it is not affected by
the current default behaviour which is causing issues.

Fixes: fe135c6 (ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-18 22:21:02 -07:00
Olof Johansson
7752b0d5dc The i.MX fixes for 4.7:
- Correct Micrel PHY mask to fix the issue that i.MX6UL ethernet works
    in U-Boot but not in kernel.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXYg70AAoJEFBXWFqHsHzO/dcH/jrXxr9zJgXclSVjLx0a+HJB
 27v2KtrTBKjeLBOuv1WE5J49SA4PaQ8og7MeAUGIVeuXjGk7v4Ba/+3CIauXQ7fF
 oEBr6e5WbzHeoSXpwgPkuMAA0vQ09kIKy2uUOecdIVrCCfS+N1koPj/jjzSTWNdk
 7OOTI5itm2T4KeuFTm5RqN0JwhsAgVECuA3JZWvmTCXScC1bjFKhi9wRcBIjt5zf
 jOVYJ3kCM7OqxCp82EM6SBY0q2MNkUlV50PjKVYeSpeiSJw3nvg+yBlvwCMTssbn
 EdH8cYI/Y+snbcvfsEJMzEpoPgBAujKxQaT3aDVF0mSkH0UykfoPjUmTFrOpjSY=
 =fD61
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

The i.MX fixes for 4.7:
 - Correct Micrel PHY mask to fix the issue that i.MX6UL ethernet works
   in U-Boot but not in kernel.

* tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx6ul: Fix Micrel PHY mask

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-18 22:18:45 -07:00
Linus Torvalds
c141afd1a2 Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
 "A couple of fixes for pmd_mknotpresent()/pmd_present() for LPAE
  systems"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8579/1: mm: Fix definition of pmd_mknotpresent
  ARM: 8578/1: mm: ensure pmd_present only checks the valid bit
2016-06-18 15:20:15 -10:00
Dmitry Torokhov
6ea24cf79e Merge branch 'cec-defines' into for-linus
Let's bring in HDMI CEC defines to ease merging CEC support in the next
merge window.
2016-06-18 17:25:08 -07:00
Linus Torvalds
607117a153 Driver core fixes for 4.7-rc4
Here are a small number of debugfs, ISA, and one driver core fix for 4.7-rc4.
 
 All of these resolve reported issues.  The ISA ones have spent the least
 amount of time in linux-next, sorry about that, I didn't realize they
 were regressions that needed to get in now (thanks to Thorsten for the
 prodding!) but they do all pass the 0-day bot tests.  The others have
 been in linux-next for a while now.
 
 Full details about them are in the shortlog below.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAldlbeQACgkQMUfUDdst+ymnFACfaWhEKA/84jwNNHiim92diJrY
 zYsAoLOmpBw68yL6qTSZbcWJF4Flb6Xk
 =N8M2
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are a small number of debugfs, ISA, and one driver core fix for
  4.7-rc4.

  All of these resolve reported issues.  The ISA ones have spent the
  least amount of time in linux-next, sorry about that, I didn't realize
  they were regressions that needed to get in now (thanks to Thorsten
  for the prodding!) but they do all pass the 0-day bot tests.  The
  others have been in linux-next for a while now.

  Full details about them are in the shortlog below"

* tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  isa: Dummy isa_register_driver should return error code
  isa: Call isa_bus_init before dependent ISA bus drivers register
  watchdog: ebc-c384_wdt: Allow build for X86_64
  iio: stx104: Allow build for X86_64
  gpio: Allow PC/104 devices on X86_64
  isa: Allow ISA-style drivers on modern systems
  base: make module_create_drivers_dir race-free
  debugfs: open_proxy_open(): avoid double fops release
  debugfs: full_proxy_open(): free proxy on ->open() failure
  kernel/kcov: unproxify debugfs file's fops
2016-06-18 06:04:01 -10:00
Caesar Wang
ad1cfdf518 arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368
The 2nd additional region is the GIC virtual cpu interface register
base and size.

As the gic400 of rk3368 says, the cpu interface register map as below

:

-0x0000 GICC_CTRL
.
.
.
-0x00fc GICC_IIDR
-0x1000 GICC_IDR

Obviously, the region size should be greater than 0x1000.
So we should make sure to include the GICC_IDR since the kernel will access
it in some cases.

Fixes: b790c2cab5 ("arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board")
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org

[added Fixes and stable-cc]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-06-18 14:54:23 +02:00
David Wu
69e5a8fe8c arm64: dts: rockchip: add i2c nodes for rk3399
We've got 9 (count em!) i2c controllers on rk3399, some of which are in
the PMU power domain and some of which are normal peripherals.  Add them
all to the main rk3399 dtsi file so future patches can turn them on in
the board dts files.

Note: by default we try to set the i2c clock rate to 200 MHz so that we
can achieve good i2c functional clock rates.  200 MHz gives us the
ability to make very close to 100 kHz / 400 kHz / 1 MHz rates.  If
boards want to tune clock rates further they can always override.
Possibly boards could want to tune this if:
- they wanted to save an infinitesimal amount of power and they knew
  their i2c bus was slow anyway.  Since we gate the functional clock
  when the i2c bus is not active, power savings would only be while i2c
  transfers were happening and probably won't be very big anyway.
- they wanted to eek out a bit more speed by carefully tuning the source
  clock to make divisions work out perfectly, accounting for the rise /
  fall time measured on an actual board.

Note also that we still request 200 MHz for the PMU i2c busses even
though we expect that we won't make that exactly (currently PPLL is 676
MHz which gives us 169 MHz).

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
[dianders: wrote desc; put in assigned-clocks; reordered nodes]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-06-18 14:00:23 +02:00
Yu-cheng Yu
99aa22d0d8 x86/fpu/xstate: Copy xstate registers directly to the signal frame when compacted format is in use
XSAVES is a kernel instruction and uses a compacted format. When working
with user space, the kernel should provide standard-format, non-supervisor
state data. We cannot do __copy_to_user() from a compacted-format kernel
xstate area to a signal frame.

Dave Hansen proposes this method to simplify copy xstate directly to user.

This patch is based on an earlier patch from Fenghua Yu <fenghua.yu@intel.com>

Originally-from: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c36f419d525517d04209a28dd8e1e5af9000036e.1463760376.git.yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-18 10:10:19 +02:00
Fenghua Yu
7d9370607d x86/fpu/xstate: Keep init_fpstate.xsave.header.xfeatures as zero for init optimization
Keep init_fpstate.xsave.header.xfeatures as zero for init optimization.
This is important for init optimization that is implemented in processor.
If a bit corresponding to an xstate in xstate_bv is 0, it means the
xstate is in init status and will not be read from memory to the processor
during XRSTOR/XRSTORS instruction. This largely impacts context switch
performance.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2fb4ec7f18b76e8cda057a8c0038def74a9b8044.1463760376.git.yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-18 10:10:19 +02:00
Fenghua Yu
bf15a8cf8d x86/fpu/xstate: Rename 'xstate_size' to 'fpu_kernel_xstate_size', to distinguish it from 'fpu_user_xstate_size'
User space uses standard format xsave area. fpstate in signal frame
should have standard format size.

To explicitly distinguish between xstate size in kernel space and the
one in user space, we rename 'xstate_size' to 'fpu_kernel_xstate_size'.

Cleanup only, no change in functionality.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
[ Rebased the patch and cleaned up the naming. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2ecbae347a5152d94be52adf7d0f3b7305d90d99.1463760376.git.yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-18 10:10:18 +02:00
Fenghua Yu
a1141e0b5c x86/fpu/xstate: Define and use 'fpu_user_xstate_size'
The kernel xstate area can be in standard or compacted format;
it is always in standard format for user mode. When XSAVES is
enabled, the kernel uses the compacted format and it is necessary
to use a separate fpu_user_xstate_size for signal/ptrace frames.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
[ Rebased the patch and cleaned up the naming. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8756ec34dabddfc727cda5743195eb81e8caf91c.1463760376.git.yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-18 10:10:18 +02:00
Keith Busch
30ce035038 x86/PCI/VMD: Use untracked irq handler
There is no way to know which device in a VMD triggered an interrupt
without invoking every registered driver's actions. This uses the
untracked irq handler so that a less used device does not trigger
spurious interrupt.

We have been previously recommending users to enable "noirqdebug", but do
not want to force a system setting just to keep this domain functional.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: Jon Derrick <jonathan.derrick@intel.com>
Link: http://lkml.kernel.org/r/1466200821-29159-2-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-18 10:00:55 +02:00
Ivan Khoronzhuk
6774b68b24 Documentation: DT: cpsw: remove rx_descs property
There is no reason to hold s/w dependent parameter in device tree.
Even more, there is no reason in this parameter because davinici_cpdma
driver splits pool of descriptors equally between tx and rx channels
anyway.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17 21:27:57 -07:00
William Breathitt Gray
3a4955111a isa: Allow ISA-style drivers on modern systems
Several modern devices, such as PC/104 cards, are expected to run on
modern systems via an ISA bus interface. Since ISA is a legacy interface
for most modern architectures, ISA support should remain disabled in
general. Support for ISA-style drivers should be enabled on a per driver
basis.

To allow ISA-style drivers on modern systems, this patch introduces the
ISA_BUS_API and ISA_BUS Kconfig options. The ISA bus driver will now
build conditionally on the ISA_BUS_API Kconfig option, which defaults to
the legacy ISA Kconfig option. The ISA_BUS Kconfig option allows the
ISA_BUS_API Kconfig option to be selected on architectures which do not
enable ISA (e.g. X86_64).

The ISA_BUS Kconfig option is currently only implemented for X86
architectures. Other architectures may have their own ISA_BUS Kconfig
options added as required.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-17 20:21:12 -07:00
Arnd Bergmann
70f4f93523 ia64: efi: use timespec64 for persistent clock
We have a generic read_persistent_clock64 interface now, and can
change the ia64 implementation to provide that instead of
read_persistent_clock.

The main point of this is to avoid the use of struct timespec
in the global efi.h, which would cause build errors as soon
as we want to build a kernel without 'struct timespec' defined
on 32-bit architectures.

Aside from this, we get a little closer to removing the
__weak read_persistent_clock() definition, which relies on
converting all architectures to provide read_persistent_clock64
instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2016-06-17 13:45:05 -07:00
Bjorn Helgaas
3b146b24a4 sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
"User" addresses are shown in /sys/devices/pci.../.../resource and
/proc/bus/pci/devices and used as mmap offsets for /proc/bus/pci/BB/DD.F
files.  On sparc, these are PCI bus addresses, i.e., raw BAR values.

Previously pci_resource_to_user() computed the user address by
subtracting either pbm->io_space.start or pbm->mem_space.start from the
resource start.

We've already told the PCI core about those offsets here:

  pci_scan_one_pbm()
    pci_add_resource_offset(&resources, &pbm->io_space, pbm->io_space.start);
    pci_add_resource_offset(&resources, &pbm->mem_space, pbm->mem_space.start);
    pci_add_resource_offset(&resources, &pbm->mem64_space, pbm->mem_space.start);

so pcibios_resource_to_bus() knows how to do that translation.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2016-06-17 14:45:03 -05:00
Bjorn Helgaas
3830135857 powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus()
"User" addresses are shown in /sys/devices/pci.../.../resource and
/proc/bus/pci/devices and used as mmap offsets for /proc/bus/pci/BB/DD.F
files.  For I/O port resources on powerpc, these are PCI bus addresses,
i.e., raw BAR values.

Previously pci_resource_to_user() computed the user address by subtracting
"hose->io_base_virt - _IO_BASE" from the resource start:

  pci_resource_to_user()
    if (IO)
      offset = (unsigned long)hose->io_base_virt - _IO_BASE;
    *start = rsrc->start - offset;

We've already told the PCI core about that "hose->io_base_virt - _IO_BASE"
offset:

  pcibios_setup_phb_resources()
    res = &hose->io_resource;
    offset = pcibios_io_space_offset();
    /* i.e., "offset = hose->io_base_virt - _IO_BASE" */
    pci_add_resource_offset(resources, res, offset);

so pcibios_resource_to_bus() knows how to do that translation.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2016-06-17 14:44:44 -05:00
Bjorn Helgaas
0ad8f06d58 microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
"User" addresses are shown in /sys/devices/pci.../.../resource and
/proc/bus/pci/devices and used as mmap offsets for /proc/bus/pci/BB/DD.F
files.  For I/O port resources on microblaze, these are PCI bus addresses,
i.e., raw BAR values.

Previously pci_resource_to_user() computed the user address by subtracting
"hose->io_base_virt - _IO_BASE" from the resource start:

  pci_resource_to_user()
    if (IO)
      offset = (unsigned long)hose->io_base_virt - _IO_BASE;
    *start = rsrc->start - offset;

We've already told the PCI core about that "hose->io_base_virt - _IO_BASE"
offset:

  pcibios_setup_phb_resources()
    res = &hose->io_resource;
    pci_add_resource_offset(resources, res, hose->io_base_virt - _IO_BASE);

so pcibios_resource_to_bus() knows how to do that translation.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2016-06-17 14:43:34 -05:00
Bjorn Helgaas
8221a01352 PCI: Unify pci_resource_to_user() declarations
Replace the pci_resource_to_user() declarations in each arch that defines
HAVE_ARCH_PCI_RESOURCE_TO_USER with a single one in linux/pci.h.

Change the MIPS static inline implementation to a non-inline version so the
static inline doesn't conflict with the new non-static linux/pci.h
declaration.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-17 14:43:34 -05:00
Bjorn Helgaas
c444a2be22 microblaze/PCI: Remove useless __pci_mmap_set_pgprot()
The microblaze __pci_mmap_set_pgprot() was apparently copied from powerpc,
where it computes either an uncacheable pgprot_t or a write-combining one.
But on microblaze, we always use the regular uncacheable pgprot_t.

Remove the useless code in __pci_mmap_set_pgprot() and inline it at the
only call site.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2016-06-17 14:43:33 -05:00
Yinghai Lu
1e70cdd6e6 powerpc/pci: Remove __pci_mmap_set_pgprot()
The powerpc-specific __pci_mmap_set_pgprot() does two things:

  1) Disables write combining for I/O port space mappings

     This only affects procfs mappings.  The pci_mmap_resource() sysfs path
     only requests write combining for resources with IORESOURCE_PREFETCH
     set, which doesn't include I/O resources.

     The only way to request write combining for I/O port space mappings
     was via the PCIIOC_WRITE_COMBINE ioctl and the proc_bus_pci_mmap()
     path, and we recently changed that path to ignore write combining for
     I/O, so this code in powerpc is no longer needed.

  2) Automatically enables write combining for mappings of prefetchable
     resources, even if not requested by the user

     Both procfs (via PCIIOC_MMAP_IS_MEM and PCIIOC_WRITE_COMBINE ioctls)
     and sysfs (via "resourceN_wc" files, which are created for resources
     with IORESOURCE_PREFETCH) provide ways for the user to map PCI memory
     space with write combining.

     Users that desire write combining should use one of those ways instead
     of relying on powerpc-specific behavior.

Remove the powerpc-specific __pci_mmap_set_pgprot().

The user-visible effect of this change is that powerpc users mapping
prefetchable PCI memory space via procfs without PCIIOC_WRITE_COMBINE or
via sysfs "resourceN" (not "resourceN_wc") will get regular uncacheable
mappings instead of the write combining mappings they used to get.

The new behavior matches the behavior on all other arches that support
write combining mapping.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-17 14:43:33 -05:00
Linus Torvalds
9cbbef4efb arm64 fixes:
- Plug the ongoing spin_unlock_wait/spin_is_locked mess
 - KGDB protocol fix to sync w/ GDB
 - Fix MIDR-based PMU probing for old 32-bit SMP systems (OMAP4/Realview)
 - Minor tweaks to the fault handling path
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJXY97DAAoJELescNyEwWM08fYH/3QSj8P11PPIoyu1qEs+9kj1
 r7lQGLMZoI/VS7OGPmgwpbQRHk227h0Rz4UnQ4/fTharVs5Pv9iPxnFKjCRCVVGK
 VuI815tWC+0mKlJ4ztn8cJk7+GgWiZttAn5qWafuXQUTfqm+ywZOxfiU0+aC9Ytn
 k5m3G46cyAvrBcNwLFcrwavzdyVjy/O3nEQVWmzT7uXmPknr52BmWjk3VuCMPdYd
 tEjoRK3Nt2xMV3E4A6oIINBz1KmmqGVW3Nzx2prD0d0oGwyT+3FDlHbm+b/fn7aK
 ti18FPUDiNSE67enYQ1+3wEyn1Ge/0Z/lLnKJxWXv4+qk3zwsCkp4h/SkOqv3fM=
 =0YtF
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "The main things are getting kgdb up and running with upstream GDB
  after a protocol change was reverted and fixing our spin_unlock_wait
  and spin_is_locked implementations after doing some similar work with
  PeterZ on the qspinlock code last week.  Whilst we haven't seen any
  failures in practice, it's still worth getting this fixed.

  Summary:

   - Plug the ongoing spin_unlock_wait/spin_is_locked mess
   - KGDB protocol fix to sync w/ GDB
   - Fix MIDR-based PMU probing for old 32-bit SMP systems
     (OMAP4/Realview)
   - Minor tweaks to the fault handling path"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kgdb: Match pstate size with gdbserver protocol
  arm64: spinlock: Ensure forward-progress in spin_unlock_wait
  arm64: spinlock: fix spin_unlock_wait for LSE atomics
  arm64: spinlock: order spin_{is_locked,unlock_wait} against local locks
  arm: pmu: Fix non-devicetree probing
  arm64: mm: mark fault_info table const
  arm64: fix dump_instr when PAN and UAO are in use
2016-06-17 07:19:13 -10:00
Dave Gerlach
d279f7a7e9 ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
Based on the latest timing specifications for the TPS65218 from the data
sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206
from November 2014, we must change the i2c bus speed to better fit within
the minimum high SCL time required for proper i2c transfer.

When running at 400khz, measurements show that SCL spends
0.8125 uS/1.666 uS high/low which violates the requirement for minimum
high period of SCL provided in datasheet Table 7.6 which is 1 uS.
Switching to 100khz gives us 5 uS/5 uS high/low which both fall above
the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.

Without this patch occasionally a voltage set operation from the kernel
will appear to have worked but the actual voltage reflected on the PMIC
will not have updated, causing problems especially with cpufreq that may
update to a higher OPP without actually raising the voltage on DCDC2,
leading to a hang.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Aparna Balasubramanian <aparnab@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-17 02:59:04 -07:00
Gavin Shan
a3aa256b72 powerpc/eeh: Fix invalid cached PE primary bus
The PE primary bus cannot be got from its child devices when having
full hotplug in error recovery. The PE primary bus is cached, which
is done in commit <05ba75f848> ("powerpc/eeh: Fix stale cached primary
bus"). In eeh_reset_device(), the flag (EEH_PE_PRI_BUS) is cleared
before the PCI hot remove. eeh_pe_bus_get() then returns NULL as the
PE primary bus in pnv_eeh_reset() and it crashes the kernel eventually.

This fixes the issue by clearing the flag (EEH_PE_PRI_BUS) before the
PCI hot add. With it, the PowerNV EEH reset backend (pnv_eeh_reset())
can get valid PE primary bus through eeh_pe_bus_get().

Fixes: 67086e32b5 ("powerpc/eeh: powerpc/eeh: Support error recovery for VF PE")
Reported-by: Pridhiviraj Paidipeddi <ppaiddipe@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-17 19:51:47 +10:00