Move the sd_fops definition such that the sd_unlock_native_capacity()
forward declaration can be removed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the scsi_disk_release() function definition such that its forward
declaration can be removed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the sd_config_discard() function definition such that its
forward declaration can be removed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the sd_remove() function definition such that the sd_shutdown()
forward declaration can be removed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
The UFS driver is the only SCSI driver I know of that may call
scsi_host_busy() before the SCSI host has been added. This patch series
modifies the UFS driver such that scsi_host_busy() is only called after the
SCSI host has been added. Additionally, commit a0b7780602 ("scsi: core: Fix
a regression triggered by scsi_host_busy()") is reverted because all
scsi_host_busy() calls now happen after the corresponding SCSI host has been
added.
Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://patch.msgid.link/20260109205104.496478-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Revert commit a0b7780602 ("scsi: core: Fix a regression triggered by
scsi_host_busy()") because all scsi_host_busy() calls now happen after
the corresponding SCSI host has been added.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260109205104.496478-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_host_busy() iterates over the host tag set. The host tag set is
initialized by scsi_mq_setup_tags(). The latter function is called by
scsi_add_host(). Hence only call scsi_host_busy() after the SCSI host
has been added. This patch prepares for reverting commit a0b7780602
("scsi: core: Fix a regression triggered by scsi_host_busy()").
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260109205104.496478-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In source code comments, use terminology that comes from the JEDEC UFS
standard. This makes it easier to compare the UFS driver code with the
JEDEC UFS standard. Add static_assert() statements that verify the size
of data structures defined in the UFS standard.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260106190017.2527978-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of
calling scnprintf() explicitly. Compile-tested only.
Cc: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260106185655.2526800-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of
calling scnprintf() explicitly. Compile-tested only.
Cc: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260106185723.2526901-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Uwe Kleine-König <u.kleine-koenig@baylibre.com> says:
Hello,
this is v2 of the series to make the scsi subsystem stop using the
callbacks .probe(), .remove() and .shutdown() of struct device_driver.
Instead use their designated alternatives in struct bus_type.
The eventual goal is to drop the callbacks from struct device_driver.
The 2nd patch introduces some legacy handling for drivers still using
the device_driver callbacks. This results in a runtime warning (in
driver_register()). The following patches convert all in-tree drivers
(and thus fix the warnings one after another).
Conceptually this legacy handling could be dropped at the end of the
series, but I think this is a bad idea because this silently breaks
out-of-tree drivers (which also covers drivers that are currently
prepared for mainline submission) and in-tree drivers I might have
missed (though I'm convinced I catched them all). That convinces me that
keeping the legacy handling for at least one development cycle is the
right choice. I'll care for that at the latest when I remove the
callbacks from struct device_driver.
Link: https://patch.msgid.link/cover.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI subsystem has implemented dedicated callbacks for probe, remove
and shutdown. Make use of them. This fixes a runtime warning about the
driver needing to be converted to the bus probe method.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/69f17c7d4f8f587e2a56e3ea268d441d98a6a895.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI subsystem has implemented dedicated callbacks for probe, remove
and shutdown. Make use of them. This fixes a runtime warning about the
driver needing to be converted to the bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/6da44731f77e8fdcd18e5f438643d58c98945db4.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI subsystem has implemented dedicated callbacks for probe, remove
and shutdown. Make use of them. This fixes a runtime warning about the
driver needing to be converted to the bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/ff6e8421f9efa84be3c37a11637aa435899160bf.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI subsystem has implemented dedicated callbacks for probe, remove
and shutdown. Make use of them. This fixes a runtime warning about the
driver needing to be converted to the bus probe method.
There is no need for an empty remove callback, no remove callback has
the same semantics. So instead of converting the remove callback, drop
it.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/7124bf21c02a116bca13940e40e97373fd776590.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI subsystem has implemented dedicated callbacks for probe, remove
and shutdown. Make use of them. This fixes a runtime warning about the
driver needing to be converted to the bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/8ad5a00c2ad2a64b81350ae3fab02fbe430f306d.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI subsystem has implemented dedicated callbacks for probe, remove
and shutdown. Make use of them. This fixes a runtime warning about the
driver needing to be converted to the bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/b36de11cbc32265a52264da5c813dd6e1abd21fd.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a bus-specific probe, remove and shutdown function. For now
this only allows to get rid of a cast of the generic device to a SCSI
device in the drivers and changes the remove prototype to return
void---a non-zero return value is ignored anyhow.
The objective is to get rid of users of struct device_driver callbacks
.probe(), .remove() and .shutdown() to eventually remove these. Until
all SCSI drivers are converted, this results in a runtime warning about
the drivers needing an update because there is a bus probe function and
a driver probe function. The in-tree drivers are fixed by the following
commits.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/a54e363a3fd2054fb924afd7df44bca7f444b5f1.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This aligns with what other subsystems do, reduces boilerplate a bit for
device drivers and is less error prone.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/ac17fdea58e384cb514c639306d48ce0005820b0.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'struct configfs_item_operations' and 'configfs_group_operations' are
not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
151831 80058 4832 236721 39cb1 drivers/target/target_core_configfs.o
45200 16658 0 61858 f1a2 drivers/target/target_core_fabric_configfs.o
After:
=====
text data bss dec hex filename
152599 79290 4832 236721 39cb1 drivers/target/target_core_configfs.o
46352 15506 0 61858 f1a2 drivers/target/target_core_fabric_configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/a0f25237ae86b8c4dd7a3876c4ed2dc3de200173.1767008082.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable tpgt in sbp_make_tpg() is defined as unsigned long and is
assigned to tpgt->tport_tpgt, which is defined as u16. This may cause an
integer overflow when tpgt is greater than USHRT_MAX (65535). I haven't
tried to trigger it myself, but it is possible to trigger it by calling
sbp_make_tpg() with a large value for tpgt.
Modify the type of tpgt to match tpgt->tport_tpgt and adjusted the
relevant code accordingly.
This patch is similar to commit 59c816c1f2 ("vhost/scsi: potential
memory corruption").
Signed-off-by: ReBeating <rebeating@163.com>
Link: https://patch.msgid.link/20251226031936.852-1-rebeating@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nilesh Javali <njavali@marvell.com> says:
Hello Martin,
Please apply the qla2xxx driver load flash FW mailbox support
along with miscellaneous bug fixes to the scsi tree at your
earliest convenience.
Link: https://patch.msgid.link/20251210101604.431868-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Issue occurred during a continuous reboot test of several thousand
iterations specific to a fabric topo with dual mode target where it
sends a PLOGI/PRLI and then sends a LOGO. The initiator was also in the
process of discovery and sent a PLOGI to the switch. It then queried a
list of ports logged in via mbx 75h and the GPDB response indicated that
the target was logged in. This caused a mismatch in the states between
the driver and FW. Requery the FW for the state and proceed with the
rest of discovery process.
Fixes: a4239945b8 ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-11-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
System crash seen during load/unload test in a loop.
[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086
[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0
[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000
[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000
[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0
[105954.384928] PKRU: 55555554
[105954.384929] Call Trace:
[105954.384931] <IRQ>
[105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx]
[105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx]
[105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx]
[105954.384999] ? __wake_up_common+0x80/0x190
[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx]
[105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx]
[105954.385040] ? __handle_irq_event_percpu+0x3d/0x190
[105954.385044] ? handle_irq_event+0x58/0xb0
[105954.385046] ? handle_edge_irq+0x93/0x240
[105954.385050] ? __common_interrupt+0x41/0xa0
[105954.385055] ? common_interrupt+0x3e/0xa0
[105954.385060] ? asm_common_interrupt+0x22/0x40
The root cause of this was that there was a free (dma_free_attrs) in the
interrupt context. There was a device discovery/fabric scan in
progress. A module unload was issued which set the UNLOADING flag. As
part of the discovery, after receiving an interrupt a work queue was
scheduled (which involved a work to be queued). Since the UNLOADING
flag is set, the work item was not allocated and the mapped memory had
to be freed. The free occurred in interrupt context leading to system
crash. Delay the driver unload until the fabric scan is complete to
avoid the crash.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202512090414.07Waorz0-lkp@intel.com/
Fixes: 783e0dc4f6 ("qla2xxx: Check for device state before unloading the driver.")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-8-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tape device doesn't show up after RSCNs. To fix this, remove tape
device specific checks which allows recovery of tape devices.
Fixes: 44c57f2058 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-7-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add new bsg interface to issue MPI passthrough sub command to validate
the new flash firmware image partition.
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-6-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FC firmware does not come online during on-the-fly upgrade i.e. on soft
reset. To limit Load flash firmware, i.e. MBC 3 changes, validate MCU
signature before executing MBC 03h
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-5-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For 28xxx adaptor Load flash firmware mailbox load the operational
firmware from flash, and also validate the checksum. Driver does not
need to load the operational firmware anymore, but it still need to read
fwdt from flash to build and allocate firmware dump template. Remove
request_firmware() support for 28xxx adapter.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512031128.XsuvzBv1-lkp@intel.com/
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-4-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Incorrect speed info is shown in driver logs for 64G SFP. Add support
for 64G SFP speed as per SFF-8472 specification.
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-3-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print additional information about the speed while displaying SFP
information.
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-2-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Multiple functions in the SCSI core accept an 'int reason' argument.
The 'int' type of these arguments doesn't make it clear what values are
acceptable for these arguments. Document which values are supported for
these arguments by introducing the enumeration type scsi_qc_status. 'qc'
in the type name stands for 'queuecommand' since the values passed as
the 'reason' argument are the .queuecommand() return values.
Cc: John Garry <john.g.garry@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251113181730.1109331-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ranjan Kumar <ranjan.kumar@broadcom.com> says:
This patch series enhances the mpt3sas driver’s device bring-up,
readiness detection, and event recovery mechanisms to improve
robustness in environments with slow-responding or transient SAS/PCIe
devices.
The series introduces optional control over issuing TEST UNIT READY
(TUR) commands during device unblocking, configurable retry limits,
and a mechanism to requeue firmware topology events when devices are
temporarily busy. Together, these updates reduce discovery failures
and improve recovery reliability following firmware or link events.
Link: https://patch.msgid.link/20251113153712.31850-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new module parameter "command_retry_count" to control the number
of retries during device discovery and readiness checks, improving
reliability for slow or transient SAS/PCIe devices.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20251113153712.31850-6-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support to requeue SAS/PCIe topology change events when devices are
busy or not ready. Introduce delayed work with retry counters so events
are retried instead of dropped, improving device discovery by retrying
transient failures instead of dropping events.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510311720.NiDwRLwp-lkp@intel.com/
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20251113153712.31850-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a new module parameter "issue_scsi_cmd_to_bringup_drive"
(default=1) which allows overriding the driver's behavior of issuing
SCSI TEST_UNIT_READY/START_UNIT commands to bring devices to READY state
during unblock.
Improve device discovery and I/O unblocking reliability by adding
robust device readiness checks and separate callback handling for
discovery I/O. This introduces new helper routines for SCSI command
execution and readiness determination, ensuring smoother recovery and
initialization for slow or transient devices.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510310924.crvtELzs-lkp@intel.com/
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20251113153712.31850-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.13
This patch set introduces reporting encryption information for Fibre
Channel HBAs.
First, the scsi_transport_fc layer is updated to include a new
fc_encryption_info attribute that is added to struct fc_rport.
Supporting sysfs and LLDD templates are provided.
Then, the lpfc driver is updated to utilize the new templates for
reporting encrypted fibre channel connections to upper layer.
The patches were cut against Martin's 6.19/scsi-queue tree.
Link: https://patch.msgid.link/20251211001659.138635-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Support logging encryption events in both point-to-point and fabric
topologies. A new LOG_ENCRYPTION flag is defined for reporting
encryption related events for HBAs that support the FEDIF feature.
Encryption information is stored in each NDLP object, which is
determined during the discovery stage after PLOGI completes.
For reporting encryption information to upper layers, the
.get_fc_rport_enc_info routine is implemented in lpfc_get_enc_info().
This allows encryption status to be reported through fc_remote_ports
sysfs. Debugfs is also updated to report encryption information for all
NDLP objects.
Signed-off-by: Sarah Catania <sarah.catania@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251211001659.138635-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a new structure for reporting an encrypted session over an
fc_rport. The encryption group is added as an attribute in struct
fc_rport and reports information in fc_encryption_info. This structure
contains a status member variable, which stores a bit value indicating
an encrypted session.
Signed-off-by: Sarah Catania <sarah.catania@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251211001659.138635-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function opencodes for_each_set_bit_wrap(). Use it, and while there
switch from goto-driven codeflow to more high-level constructions.
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251205235808.358258-1-yury.norov@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The scp pointer cannot be NULL, as it is evaluated from container_of()
and pointer offsets (so remove the check in sdebug_q_cmd_complete()).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251113133645.2898748-4-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Using READ/WRITE_ONCE() means that the read or write is not torn by the
compiler.
READ/WRITE_ONCE() is always used when accessing sdebug_defer.defer_t.
However, we also guard the access in a spinlock when accessing that
member, and spinlock already guarantees no tearing, so stop using
READ/WRITE_ONCE().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251113133645.2898748-3-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver defines as follows pr_fmt:
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
...meaning that we already get the function name added in any debug
statements.
Remove using of __func__ in debug logs to avoid the duplication.
For instances of where the function name was being printed, add some
verbose comment to avoid using "" (which would be a bit silly).
It would be nicer to stop using pr_fmt(), but that would mean rewriting
approx 100 debug statements to have a sensible and clear message.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251113133645.2898748-2-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, ufshcd_mcq_enable_esi() manually implements a
read-modify-write sequence using ufshcd_readl() and ufshcd_writel().
It also utilizes a hardcoded magic number (0x2) for the enable bit.
Use ufshcd_rmwl() helper, replace the magic number with the
ESI_ENABLE macro to improve code readability.
No functional change intended.
Signed-off-by: vamshi gajjela <vamshigajjela@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251211133227.4159394-1-vamshigajjela@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
