Just like the TI J7200 padconf, we lose the context and therefore need
to save it and restore it across suspend/resume states.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
[linusw@kernel.org: rebased on am62l changes]
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the "brcm,bcm7038-padconf" compatible to the pinctrl-single binding.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The pin controller on the Apple silicon t8122 (M3) SoC is compatible
with the existing driver. Add "apple,t8122-pinctrl" as SoC specific
compatible under "apple,t8103-pinctrl" used by the driver.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
These variables are local to the driver and have no need to be exported
to the global namespace. Label them as static to fix compiler warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604080950.Mvm8aN0a-lkp@intel.com/
Fixes: 9826035a75 ("pinctrl: qcom: add sdm670 lpi tlmm")
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Fix the SoC model in module description string, it should be
sg2044 instead of sg2002.
Fixes: 614a54cb5a ("pinctrl: sophgo: add support for SG2044 SoC")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Fix the SoC model in module description string, it should be
sg2042 instead of sg2002.
Fixes: 1e67465d3b ("pinctrl: sophgo: add support for SG2042 SoC")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The Snapdragon 670 has an Low-Power Island (LPI) TLMM for configuring
pins related to audio. Add the driver for this.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the pin controller for the audio Low-Power Island (LPI) on SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
There can be reserved GPIOs on the LPASS LPI pin controller to possibly
control sensors. Add the property for reserved GPIOs so they can be
avoided appropriately.
Adapted from the same entry in qcom,tlmm-common.yaml.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Qualcomm's IPQ5210 SoC comes with a TLMM block, like all other platforms,
so add a driver for it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
[linusw@kernel.org: Dropped intr_target_reg]
Signed-off-by: Linus Walleij <linusw@kernel.org>
On all Qualcomm TLMM generations from APQ8084 onwards, the interrupt
target routing bits are located in the same register as the interrupt
configuration bits (intr_cfg_reg). Only five older SoCs — APQ8064,
IPQ8064, MDM9615, MSM8660 and MSM8960 — have a genuinely separate
interrupt target routing register at a different offset (0x400 + 0x4 * id).
Replace MSM_ACCESSOR(intr_target) with a custom accessor that falls back
to intr_cfg_reg when intr_target_reg is zero. Apply the same fallback in
the SCM path. Drop the now-redundant .intr_target_reg initializer from
all SoC drivers where it duplicated intr_cfg_reg, keeping it only in
the five drivers where it genuinely differs.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The intr_target_bit for Eliza was incorrectly set to 5, which is the
value used by older Qualcomm SoCs (e.g. SM8250, MSM8996, X1E80100).
Newer SoCs such as SM8650, SM8750, Milos, and Kaanapali all use
bit 8 for the interrupt target field in the TLMM interrupt configuration
register.
Eliza belongs to the newer generation and should use bit 8 to correctly
route interrupts to the KPSS (Applications Processor). Using the wrong
bit position means the interrupt target routing is silently misconfigured,
which can result in GPIO interrupts not being delivered to the expected
processor.
Fix this by aligning Eliza with the correct value used by its peer SoCs.
Fixes: 6f26989e15 ("pinctrl: qcom: Add Eliza pinctrl driver")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
- Add pin configuration support for RZ/T2H and RZ/N2H,
- Fix save/restore of registers for ports with variable pincfg per pin
on RZ/G3E, RZ/V2H(P), RZ/V2N, and RZ/Five,
- Drop a superfluous blank line.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCacZV5AAKCRCKwlD9ZEnx
cIV9AQDLvTixEFxKC+rtfYF9pLjvYVx+4GS4Fw8vGa96XrpWFQEA4gudqo3LcOZF
lvM+i6XxQN5x7Uot4vVjgyVePY7kuAk=
=neS4
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v7.1
- Add pin configuration support for RZ/T2H and RZ/N2H,
- Fix save/restore of registers for ports with variable pincfg per pin
on RZ/G3E, RZ/V2H(P), RZ/V2N, and RZ/Five,
- Drop a superfluous blank line.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add AMDI0033 to the AMD GPIO ACPI match table.
This lets the driver bind on new AMD platforms that expose this HID.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The rzg2l_pinctrl_pm_setup_regs() handles save/restore of
{IOLH,IEN,PUPD,SMT} registers during s2ram, but only for ports where all
pins share the same pincfg. Extend the code to also support ports with
variable pincfg per pin, so that {IOLH,IEN,PUPD,SMT} registers are
correctly saved and restored for all pins.
Fixes: 254203f9a9 ("pinctrl: renesas: rzg2l: Add suspend/resume support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326162459.101414-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add pin configuration support for the Renesas RZ/T2H SoC. The RZ/T2H SoC
allows configuring several electrical characteristics through the DRCTLm
(I/O Buffer Function Switching) registers. These registers control bias
configuration, Schmitt trigger input, output slew rate, and drive
strength.
Implement pinconf_ops to allow reading and updating these properties
through the generic pin configuration framework. The implementation
supports bias-disable, bias-pull-up, bias-pull-down,
input-schmitt-enable, slew-rate, and drive-strength-microamp.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260319141515.2053556-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The ARM SCMI pinctrl protocol allows GPIO access. Instead of creating
a new SCMI GPIO driver, this driver is a generic GPIO driver that uses
standard pinctrl interfaces.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Traditionally, firmware will provide a GPIO interface or a pin control
interface. However, the SCMI protocol provides a generic pin control
interface and the GPIO support is built on top of that using the normal
pin control interfaces. Potentially, other firmware will adopt a
similar generic approach in the future.
Document how to configure the GPIO device.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The SCMI protocol specification says that the PINCTRL_REQUEST and
PINCTRL_RELEASE commands are optional. So if the SCMI server returns
-EOPNOTSUPP, then treat that as success and continue.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The PIN_CONFIG_PERSIST_STATE setting ensures that the pin state persists
across a sleep or controller reset. The SCMI spec does not have an
equivalent command to this so just ignore it.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The argument for PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS is supposed to
be expressed in terms of ohms. But the pinctrl-scmi driver was
implementing it the same as PIN_CONFIG_OUTPUT and writing either a
zero or one to the pin.
The SCMI protocol doesn't have an support configuration type so just
delete this code instead of replacing it.
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The PIN_CONFIG_LEVEL parameter represents the value of the pin, whether
reading or writing to the pin. In SCMI, the parameter is represented by
two different values SCMI_PIN_OUTPUT_VALUE for writing to a pin and
SCMI_PIN_INPUT_VALUE for reading. The current code translates
PIN_CONFIG_LEVEL as SCMI_PIN_OUTPUT_VALUE (writing).
Add a function to translate it to either INPUT or OUTPUT depending on
whether it is called from a _get or _set() operation.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
This is a counterpart of pinctrl_gpio_set_config(), which will be used
to implement the ->get() interface in a GPIO driver for SCMI.
This also requires that we create a stub so pin_config_get_for_pin()
can build when CONFIG_PINCONF is disabled.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The argument variable is assigned the return value of
pinconf_to_config_argument(), which returns a u32. Change its type from
enum pin_config_param to unsigned int to correctly store the configuration
argument.
Fixes: 03b054e969 ("pinctrl: Pass all configs to driver on pin_config_set()")
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for Realtek RTD1625 SoC using the realtek common pinctrl driver.
This patch introduces the RTK_PIN_CONFIG_V2 and RTK_PIN_CONFIG_I2C macros,
which are required to describe the specific register layout and electrical
features (such as slew rate and high VIL) of the RTD1625 pins.
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for configuring slew rate, input voltage level and high VIL
mode. This involves updating the pin configuration parsing logic to handle
PIN_CONFIG_SLEW_RATE, PIN_CONFIG_INPUT_VOLTAGE_UV and the new custom
property "realtek,high-vil-microvolt".
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The previous description was misleading because this hardware block is not
a PWM generator. It does not generate a signal with a specific frequency
and duty ratio.
Instead, it provides a fixed nanosecond-level adjustment to the rising/
falling edges of an existing signal.
The property name is kept as 'realtek,duty-cycle' rather than being
renamed to strictly preserve Device Tree ABI backward compatibility.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add a new generic pin configuration parameter PIN_CONFIG_INPUT_VOLTAGE_UV.
This parameter is used to specify the input voltage level of a pin in
microvolts, which corresponds to the 'input-voltage-microvolt' property
in Device Tree.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add a generic pin configuration property
"input-threshold-voltage-microvolt" to support hardware designs where the
input logic threshold is decoupled from the power supply voltage.
This property allows the pinctrl driver to configure the correct internal
reference voltage for pins that need to accept input signals at a different
voltage level than their power supply. For example, a pin powered by 3.3V
may need to accept 1.8V logic signals.
This defines the reference for VIH (Input High Voltage) and VIL (Input Low
Voltage) thresholds, enabling proper signal detection across different
voltage domains.
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The argument originates from pinconf_to_config_argument(), which returns a
u32. Therefore, the arg parameter should be an unsigned int instead of enum
pin_config_param.
Fixes: e99ce78030 ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs")
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Convert pinconf_generic_parse_dt_pinmux() to fwnode API. This makes code
cleaner and potentially reusable for some other types of fwnodes, such as
software nodes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Currently we convert device node to fwnode in the
pinconf_generic_parse_dt_config() and then validate the device node.
This is confusing order. Instead, assign fwnode and validate it.
Fixes: e002d16265 ("pinctrl: pinconf-generic: Use only fwnode API in parse_dt_cfg()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property
is not empty when present. This might be not true. With that, the allocator
will give a special value in return and not NULL which lead to the crash
when trying to access that (invalid) memory. Fix that by fully validating
'pinmux' value, including its length.
Fixes: 7112c05fff ("pinctrl: pinconf-generic: Add API for pinmux propertity in DTS file")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Simplifies allocation slightly by removing a kcalloc call and using
struct_size.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[linusw@kernel.org: Add in count variable and use __counted_by()]
Signed-off-by: Linus Walleij <linusw@kernel.org>
Assign gpiochip_generic_config() to the set_config() callback to support
pin configuration through the GPIO subsystem. This allows users to
configure GPIO pin attributes like pull-up/down when specifying a GPIO
line in the Device Tree.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Return -ENOTSUPP instead of -EINVAL when encountering unsupported pin
configuration parameters. This is more logical and allows the GPIO
subsystem to gracefully handle unsupported parameters via functions like
gpio_set_config_with_argument_optional(), which specifically ignores
-ENOTSUPP but treats others as failure.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Replace NULL check with IS_ERR() for devm_platform_ioremap_resource()
return value. Use dev_err_probe() for error handling to maintain
consistency with the rest of the probe function.
Fixes: b7f698b22b ("pinctrl: realtek: Switch to use devm functions")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
It is possible that devices tristate buffers may set the buffer to
the high-Z state in addition to setting pull-up or pull-down on a pin.
Remove this particular restriction to prevent warning on zynqmp systems
where this configuration seems to be valid.
Reported-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: a901e8705f ("dt-bindings: pinctrl: pincfg-node: add restrictions on conflicting properties")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Prefer using IS_ERR_OR_NULL() over using IS_ERR() and a manual NULL
check.
Change generated with coccinelle.
To: Linus Walleij <linusw@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add a driver for the pin controller in the Low Power Audio SubSystem
(LPASS) on the Milos SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
When probe fails due to unclear interrupt status register, it returns
a positive number instead of the proper error code. Fix this accordingly.
Fixes: e6cbbe4294 ("pinctrl: Add Cypress cy8c95x0 support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202602271847.vVWkqLBD-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The GPIO .get() callback is expected to return 0 or 1 (or a negative
error code). Ensure that the value returned by rza1_gpio_get() is
normalized to the [0, 1] range.
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/aZYnyl-Nf4S1U2yj@google.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
