[ Upstream commit 45608a3eb4 ]
The Anbernic RG35XX devices use an SPI LCD panel from an unknown OEM,
with an NV3052C driver chip.
As discussed previously, the integrating vendor and device name are
preferred instead of the OEM serial. A previous patch corrected the
device tree binding and of_device_id in the NV3052C driver, however the
spi_device_id also needs correction.
Correct the spi_device_id for the RG35XX panel.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Fixes: 76dce2a96c ("drm: panel: nv3052c: Correct WL-355608-A8 panel compatible")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241020083836.175733-1-ryan@testtoast.com
[DB: corrected the Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffcde9e44d ]
The PIXCLK needs to be enabled in SCFG before accessing certain DCU
registers, or the access will hang. For simplicity, the PIXCLK is enabled
unconditionally, resulting in increased power consumption.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 109eee2f2a ("drm/layerscape: Add Freescale DCU DRM driver")
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926055552.1632448-2-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d241a139c2 ]
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
ssid_len = user_scan_in->ssid_list[i].ssid_len;
[...]
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[i].ssid, ssid_len);
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007222301.24154-1-alpernebiyasak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29dd3e48b9 ]
It seems it is necessary to set WILC MAC address after operation mode,
otherwise the MAC address of the WILC MAC is reset back to what is in
nvmem. This causes a failure to associate with AP after the WILC MAC
address was overridden by userspace.
Test case:
"
ap$ cat << EOF > hostap.conf
interface=wlan0
ssid=ssid
hw_mode=g
channel=6
wpa=2
wpa_passphrase=pass
wpa_key_mgmt=WPA-PSK
EOF
ap$ hostapd -d hostap.conf
ap$ ifconfig wlan0 10.0.0.1
"
"
sta$ ifconfig wlan0 hw ether 00:11:22:33:44:55
sta$ wpa_supplicant -i wlan0 -c <(wpa_passphrase ssid pass)
sta$ ifconfig wlan0 10.0.0.2
sta$ ping 10.0.0.1 # fails without this patch
"
AP still indicates SA with original MAC address from nvmem without this patch:
"
nl80211: RX frame da=ff:ff:ff:ff:ff:ff sa=60:01:23:45:67:89 bssid=ff:ff:ff:ff:ff:ff ...
^^^^^^^^^^^^^^^^^
"
Fixes: 83d9b54ee5 ("wifi: wilc1000: read MAC address from fuse at probe")
Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241003132504.52233-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d7c2194f1 ]
cfg80211_rx_assoc_resp() and cfg80211_rx_mlme_mgmt() need to be called
with the wiphy locked, so lock it before calling these functions.
Fixes: 36995892c2 ("wifi: mwifiex: add host mlme for client mode")
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240918-mwifiex-cleanup-1-v2-1-2d0597187d3c@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b29e231d66 ]
txmsg_redir in "Test pull + redirect" case of test_txmsg_pull should be
1 instead of 0.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee9b352ce4 ]
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee09 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Fixes: 16edddfe3c ("selftests/bpf: test_sockmap, check test failure")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d343723c7 ]
When a display controller driver uses DRM_BRIDGE_ATTACH_NO_CONNECTOR,
tc358767 will behave properly and skip the creation of the connector.
However, tc_get_display_props(), which is used to find out about the DP
monitor and link, is only called from two places: .atomic_enable() and
tc_connector_get_modes(). The latter is only used when tc358767 creates
its own connector, i.e. when DRM_BRIDGE_ATTACH_NO_CONNECTOR is _not_
set.
Thus, the driver never finds out the link properties before get_edid()
is called. With num_lanes of 0 and link_rate of 0 there are not many
valid modes...
Fix this by adding tc_get_display_props() call at the beginning of
get_edid(), so that we have up to date information before looking at the
modes.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/24282420-b4dd-45b3-bb1c-fc37fe4a8205@siemens.com/
Fixes: de5e6c027a ("drm/bridge: tc358767: add drm_panel_bridge support")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108-tc358767-v2-2-25c5f70a2159@ideasonboard.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cf567f421 ]
The current code only copies the address for the in path, leaving the out
path address set to 0. This patch corrects the issue by copying the addresses
for both the in and out paths. Before this patch:
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=0.0.0.0
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
After this patch:
= cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=192.168.0.2
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
Fixes: 7699353da8 ("netdevsim: add ipsec offload testing")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241010040027.21440-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db089c9158 ]
Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).
This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.
Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.
Fixes: bd054102a8 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eaa497411 ]
Refactor IPC send and receive functions to allow correct
handling of operations that should not trigger a recovery process.
Expose ivpu_send_receive_internal(), which is now utilized by the D0i3
entry, DCT initialization, and HWS initialization functions.
These functions have been modified to return error codes gracefully,
rather than initiating recovery.
The updated functions are invoked within ivpu_probe() and ivpu_resume(),
ensuring that any errors encountered during these stages result in a proper
teardown or shutdown sequence. The previous approach of triggering recovery
within these functions could lead to a race condition, potentially causing
undefined behavior and kernel crashes due to null pointer dereferences.
Fixes: 45e45362e0 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4073213488 ]
sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.
While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:
libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed
It's clearly not a map relocation, but is treated and reported as such
without this fix.
Fixes: 53eddb5e04 ("libbpf: Support subprog address relocation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241009011554.880168-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b0bd1b02e ]
Commit 92c17d1647 ("drm/vc4: hvs: Ignore atomic_flush if we're disabled")
added a path which returned early without having called drm_dev_exit.
Ensure all paths call drm_dev_exit.
Fixes: 92c17d1647 ("drm/vc4: hvs: Ignore atomic_flush if we're disabled")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-2-9d0396ca9f42@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24c5ed3ddf ]
With the introduction of the BCM2712 support, we will get yet another
generation of display engine to support.
The binary check of whether it's VC5 or not thus doesn't work anymore,
especially since some parts of the driver will have changed with BCM2711,
and some others with BCM2712.
Let's introduce an enum to store the generation the driver is running
on, which should provide more flexibility.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-21-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Stable-dep-of: cf1c87d978 ("drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_lut_load")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59f8b2b7fb ]
Now we wait for write responses and have a burst
size of 4, we can set the fifo threshold much higher.
Set it to 28 (of the 32 entry size) to keep fifo
fuller and reduce chance of underflow.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-8-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Stable-dep-of: cf1c87d978 ("drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_lut_load")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a884c304e1 ]
The ice_vc_cfg_qs_msg() function is used to configure VF queues in response
to a VIRTCHNL_OP_CONFIG_VSI_QUEUES command.
The virtchnl command contains an array of queue pair data for configuring
Tx and Rx queues. This data includes a queue ID. When configuring the
queues, the driver generally uses this queue ID to determine which Tx and
Rx ring to program. However, a handful of places use the index into the
queue pair data from the VF. While most VF implementations appear to send
this data in order, it is not mandated by the virtchnl and it is not
verified that the queue pair data comes in order.
Fix the driver to consistently use the q_idx field instead of the 'i'
iterator value when accessing the rings. For the Rx case, introduce a local
ring variable to keep lines short.
Fixes: 7ad15440ac ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9813d13b ]
Currently, wiphy_verify_combinations() fails for the multi-radio per wiphy
due to the condition check on new global interface combination that DFS
only works on one channel. In a multi-radio scenario, new global interface
combination encompasses the capabilities of all radio combinations, so it
supports more than one channel with DFS. For multi-radio per wiphy,
interface combination verification needs to be performed for radio specific
interface combinations. This is necessary as the new global interface
combination combines the capabilities of all radio combinations.
Fixes: a01b1e9f99 ("wifi: mac80211: add support for DFS with multiple radios")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20240917140239.886083-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc9b3fb827 ]
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Fixes: f6642de0c3 ("selftests/bpf: Add csum helpers")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008-network_helpers_fix-v1-1-2c2ae03df7ef@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c57ec6c4b ]
Currently, mem_ce and mem iomem addresses are used to calculate the
CE offset address. mem_ce is initialized with mem address, and for
targets where ce_remap is needed, mem_ce is remapped to a new address
space during AHB probe.
For targets such as WCN6750 in which CE address space is same as WCSS
address space (i.e. "ce_remap" hw_param is set to false), mem_ce and
mem iomem addresses are same. In the initial SRNG setup for such targets,
the CE offset address and hence CE register base addresses are
calculated correctly in ath11k_hal_srng_init() as both mem and mem_ce
are initialized with same iomem address.
Later, after the firmware download, mem is initialized with BAR address
received in qmi_wlanfw_device_info_resp_msg_v01 QMI message, while mem_ce
is not updated.
After initial setup success, during Subsystem Restart (SSR), as part
of reinitialization, ath11k_hal_srng_init() will be called again,
and CE offset address will be calculated incorrectly this time as mem_ce
address was not updated. Due to the incorrect CE offset address,
APPS accesses an invalid CE register address which leads to improper
behavior in firmware after SSR is triggered.
To fix the above issue, update mem_ce to mem iomem address in
ath11k_qmi_request_device_info() for targets which do not support
ce_remap feature.
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Fixes: b42b3678c9 ("wifi: ath11k: remap ce register space for IPQ5018")
Link: https://patch.msgid.link/20240927095825.22317-1-quic_bpothuno@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bf1557e3d ]
test_progs uses glibc specific functions backtrace() and
backtrace_symbols_fd() to print backtrace in case of SIGSEGV.
Recent commit (see fixes) updated test_progs.c to define stub versions
of the same functions with attriubte "weak" in order to allow linking
test_progs against musl libc. Unfortunately this broke the backtrace
handling for glibc builds.
As it turns out, glibc defines backtrace() and backtrace_symbols_fd()
as weak:
$ llvm-readelf --symbols /lib64/libc.so.6 \
| grep -P '( backtrace_symbols_fd| backtrace)$'
4910: 0000000000126b40 161 FUNC WEAK DEFAULT 16 backtrace
6843: 0000000000126f90 852 FUNC WEAK DEFAULT 16 backtrace_symbols_fd
So does test_progs:
$ llvm-readelf --symbols test_progs \
| grep -P '( backtrace_symbols_fd| backtrace)$'
2891: 00000000006ad190 15 FUNC WEAK DEFAULT 13 backtrace
11215: 00000000006ad1a0 41 FUNC WEAK DEFAULT 13 backtrace_symbols_fd
In such situation dynamic linker is not obliged to favour glibc
implementation over the one defined in test_progs.
Compiling with the following simple modification to test_progs.c
demonstrates the issue:
$ git diff
...
\--- a/tools/testing/selftests/bpf/test_progs.c
\+++ b/tools/testing/selftests/bpf/test_progs.c
\@@ -1817,6 +1817,7 @@ int main(int argc, char **argv)
if (err)
return err;
+ *(int *)0xdeadbeef = 42;
err = cd_flavor_subdir(argv[0]);
if (err)
return err;
$ ./test_progs
[0]: Caught signal #11!
Stack trace:
<backtrace not supported>
Segmentation fault (core dumped)
Resolve this by hiding stub definitions behind __GLIBC__ macro check
instead of using "weak" attribute.
Fixes: c9a83e76b5 ("selftests/bpf: Fix compile if backtrace support missing in libc")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20241003210307.3847907-1-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4236f114a3 ]
During the xdp_adjust_tail test, probabilistic failure occurs and SKB package
is discarded by the kernel. After checking the issues by tracking SKB package,
it is identified that they were caused by checksum errors. Refer to checksum
of the arch/arm64/include/asm/checksum.h for fixing.
v2: Based on Alexei Starovoitov's suggestions, it is necessary to keep the code
implementation consistent.
Fixes: c6ffd1ff78 (bpf: add bpf_xdp_adjust_tail sample prog)
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240930024115.52841-1-chenyuan_fl@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19090f0306 ]
The prog_tests programs do not include the per-arch tools include
path, e.g. tools/arch/riscv/include. Some architectures depend those
files to build properly.
Include tools/arch/$(SUBARCH)/include in the selftests bpf build.
Fixes: 6d74d178fe ("tools: Add riscv barrier implementation")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240927131355.350918-2-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 710fbca820 ]
libbpf does not include the per-arch tools include path, e.g.
tools/arch/riscv/include. Some architectures depend those files to
build properly.
Include tools/arch/$(SUBARCH)/include in the libbpf build.
Fixes: 6d74d178fe ("tools: Add riscv barrier implementation")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240927131355.350918-1-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19c23eb61f ]
A previous patch addressed a fortified-memcpy warning on older compilers,
but there is still a warning on gcc-14 in some configurations:
In file included from include/linux/string.h:390,
from drivers/net/wireless/ath/ath12k/wow.c:7:
drivers/net/wireless/ath/ath12k/wow.c: In function 'ath12k_wow_convert_8023_to_80211.isra':
include/linux/fortify-string.h:114:33: error: '__builtin_memcpy' accessing 18446744073709551610 or more bytes at offsets 0 and 0 overlaps 9223372036854775797 bytes at offset -9223372036854775803 [-Werror=restrict]
include/linux/fortify-string.h:679:26: note: in expansion of macro '__fortify_memcpy_chk'
679 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath12k/wow.c:199:25: note: in expansion of macro 'memcpy'
199 | memcpy(pat + a3_ofs - pkt_ofs,
| ^~~~~~
Address this the same way as the other two, using size_add().
Fixes: b49991d83b ("wifi: ath12k: fix build vs old compiler")
Fixes: 4a3c212eee ("wifi: ath12k: add basic WoW functionalities")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004095420.637091-1-arnd@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdb2811033 ]
During ath12k module removal, in ath12k_core_deinit(),
ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees
the ah->hw as well as all the ar's in it. After this
ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup()
tries to access one of the freed ar's from pending skb.
This is because during mac destroy, driver failed to flush few
data packets, which were accessed later in ath12k_dp_cc_cleanup()
and freed, but using ar from the packet led to this use-after-free.
BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
Write of size 4 at addr ffff888150bd3514 by task modprobe/8926
CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted
6.11.0-rc2-wt-ath+ #1746
Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS
HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xe0
print_address_description.constprop.0+0x33/0x3a0
print_report+0xb5/0x260
? kasan_addr_to_slab+0x24/0x80
kasan_report+0xd8/0x110
? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
kasan_check_range+0xf3/0x1a0
__kasan_check_write+0x14/0x20
ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
ath12k_dp_free+0x178/0x420 [ath12k]
ath12k_core_stop+0x176/0x200 [ath12k]
ath12k_core_deinit+0x13f/0x210 [ath12k]
ath12k_pci_remove+0xad/0x1c0 [ath12k]
pci_device_remove+0x9b/0x1b0
device_remove+0xbf/0x150
device_release_driver_internal+0x3c3/0x580
? __kasan_check_read+0x11/0x20
driver_detach+0xc4/0x190
bus_remove_driver+0x130/0x2a0
driver_unregister+0x68/0x90
pci_unregister_driver+0x24/0x240
? find_module_all+0x13e/0x1e0
ath12k_pci_exit+0x10/0x20 [ath12k]
__do_sys_delete_module+0x32c/0x580
? module_flags+0x2f0/0x2f0
? kmem_cache_free+0xf0/0x410
? __fput+0x56f/0xab0
? __fput+0x56f/0xab0
? debug_smp_processor_id+0x17/0x20
__x64_sys_delete_module+0x4f/0x70
x64_sys_call+0x522/0x9f0
do_syscall_64+0x64/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f8182c6ac8b
Commit 24de1b7b23 ("wifi: ath12k: fix flush failure in recovery
scenarios") added the change to decrement the pending packets count
in case of recovery which make sense as ah->hw as well all
ar's in it are intact during recovery, but during core deinit there
is no use in decrementing packets count or waking up the empty waitq
as the module is going to be removed also ar's from pending skb's
can't be used and the packets should just be released back.
To fix this, avoid accessing ar from skb->cb when driver is being
unregistered.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 24de1b7b23 ("wifi: ath12k: fix flush failure in recovery scenarios")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241001092652.3134334-1-quic_ramess@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ce8e4d380 ]
Multi link aggregation is not supported for acp6.3 platform.
Below combinations are supported.
- one sdw BE DAI <---> one-cpu DAI <---> one-codec DAI
- one sdw BE DAI <---> one-cpu DAI <---> multi-codec DAIs
As Single cpu dai is going to be created, In create_sdw_dailink() function
cpu dai index won't be incremented.
Refactor cpu dai index logic to fix below smatch static checker warning.
sound/soc/amd/acp/acp-sdw-sof-mach.c:157 create_sdw_dailink()
warn: iterator 'i' not incremented.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a201e871-375e-43eb-960d-5c048956c2ff@amd.com/T/
Fixes: 6d8348ddc5 ("ASoC: amd: acp: refactor SoundWire machine driver code")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241007085321.3991149-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7063ed675 ]
In STA+AP concurrent mode, performing a scan operation on one vif
temporarily stops beacons on the other. When the scan is completed,
beacons are enabled again with BSS_CHANGED_BEACON_ENABLED.
We can observe that no beacons are being sent when just
rtl8xxxu_start_tx_beacon() is being called.
Thus, also perform update_beacon_work in order to restore beaconing.
Fixes: cde8848cad ("wifi: rtl8xxxu: Add beacon functions")
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240930084955.455241-1-martin.kaistra@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d59f2fbfb ]
The arguments got swapped by commit 986ae3c2a8 ("dlm: fix race between
final callback and remove") fixing this now.
Fixes: 986ae3c2a8 ("dlm: fix race between final callback and remove")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c27d8235ba ]
When building selftests, the following was seen:
uprobe_multi.c: In function ‘trigger_uprobe’:
uprobe_multi.c:108:40: error: ‘MADV_PAGEOUT’ undeclared (first use in this function)
108 | madvise(addr, page_sz, MADV_PAGEOUT);
| ^~~~~~~~~~~~
uprobe_multi.c:108:40: note: each undeclared identifier is reported only once for each function it appears in
make: *** [Makefile:850: bpf-next/tools/testing/selftests/bpf/uprobe_multi] Error 1
...even with updated UAPI headers. It seems the above value is
defined in UAPI <linux/mman.h> but including that file triggers
other redefinition errors. Simplest solution is to add a
guarded definition, as was done for MADV_POPULATE_READ.
Fixes: 3c217a1820 ("selftests/bpf: add build ID tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240926144948.172090-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f896b4a539 ]
Object linking output data uses the default ELF_T_BYTE type for '.symtab'
section data, which disables any libelf-based translation. Explicitly set
the ELF_T_SYM type for output to restore libelf's byte-order conversion,
noting that input '.symtab' data is already correctly translated.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/87868bfeccf3f51aec61260073f8778e9077050a.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a400d08b30 ]
Referenced commit broke the logic of resetting expected_attach_type to
zero for allowed program types if kernel doesn't yet support such field.
We do need to overwrite and preserve expected_attach_type for
multi-uprobe though, but that can be done explicitly in
libbpf_prepare_prog_load().
Fixes: 5902da6d8a ("libbpf: Add uprobe multi link support to bpf_program__attach_usdt")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240925153012.212866-1-chen.dylane@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 574c558ddb ]
The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.
It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.
Drop the cache to force an EDID read after system resume to fix this.
Fixes: 11feaef69d ("drm/bridge: it6505: Add caching for EDID")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-3-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00ae002116 ]
The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.
It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.
Drop the cache to force an EDID read after system resume to fix this.
Fixes: 8bdfc5dae4 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfd1054c65 ]
The DT bindings deprecated the "hp-det-gpio" and "mic-det-gpio"
properties in favor of "hp-det-gpios" and "mic-det-gpios", but the
driver was never updated to support the latter.
Even before, there existed users of "hp-det-gpios" and "mic-det-gpios".
While this may have been handled fine by the ASoC core, this was missed
by the Freescale-specific part.
Fixes: 4189b54220 ("ASoC: dt-bindings: fsl-asoc-card: convert to YAML")
Fixes: 40ba2eda0a ("arm64: dts: imx8mm-nitrogen-r2: add audio")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/dbcb5bfea005a468ec6dc38374fe6d02bc693c22.1727438777.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e47cb9d253 ]
This commit addresses an omission in the previous patch related to the
cleaner shader support for GFX9 hardware. Specifically, it adds the
necessary deinitialization code for the cleaner shader in the
gfx_v9_0_sw_fini function.
The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any
allocated resources for the cleaner shader are freed correctly, avoiding
potential memory leaks and ensuring that the GPU state is clean for the
next initialization sequence.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: c2e70d307f ("drm/amdgpu/gfx9: Implement cleaner shader support for GFX9 hardware")
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
