The DTS code coding style expects exactly one space around '=' and
before '{' characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251223152559.155703-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device trees for the Qualcomm X1E and X1P-based Microsoft Surface
Pro 11 machines (codenamed 'Denali').
This device is very similar to the Surface Laptop 7 ('Romulus').
Use a similar strategy to x1-asus-zenbook-a14.dtsi so that we can create
x1e and x1p-specific flavors of the device tree without too much code
duplication.
Hardware support is similar to other X1 machines. The most notable
missing features are:
- Touchscreen and pen
- Cameras (and status LEDs)
Signed-off-by: Dale Whinham <daleyo@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251220-surface-sp11-for-next-v6-4-81f7451edb77@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the compatibles for the Qualcomm-based Microsoft Surface Pro 11,
using its Denali codename.
The LCD models are using the Qualcomm Snapdragon X1 Plus (X1P64100),
the OLED ones are using the Qualcomm Snapdragon X1 Elite (X1E80100).
Due to the difference in how the built-in panel is being handled
between the OLED variant and LCD one, it is required to have two
separate DTBs, so document the compatible string for both variants.
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251220-surface-sp11-for-next-v6-1-81f7451edb77@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Multiport controller on Hamoa EVK platform is connected to Two Type-A
ports. VBUS for each of these ports are provided by a TPS2559QWDRCTQ1
regulator, controlled from PMIC GPIOs.
Add the necessary regulators and GPIO configuration to power these.
Implement connector nodes to embed the vbus supply within them. Since
there is no entity currently that can read vbus supply from a Type-A
connector and control it, mark the supplies as always on.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251219161407.2075701-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Conform to the new firmware path scheme.
Includes cosmetic cleanups.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251222-oneplus6-new-fw-path-v1-4-a2d366f9eb89@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Conform to the new firmware path scheme.
Includes cosmetic cleanups.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251222-oneplus6-new-fw-path-v1-3-a2d366f9eb89@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Conform to the new firmware path scheme.
Includes cosmetic cleanups.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251222-oneplus6-new-fw-path-v1-2-a2d366f9eb89@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Conform to the new firmware path scheme.
Includes cosmetic cleanups.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251222-oneplus6-new-fw-path-v1-1-a2d366f9eb89@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable GPU on both qcs9100-ride platforms and provide the path
for zap shader.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251230-a663-gpu-support-v9-4-186722e25387@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable GPU for lemans-evk platform and provide path for zap
shader.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251230-a663-gpu-support-v9-3-186722e25387@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures.
Set up GPU cooling by throttling the GPU speed
when reaching 105°C.
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251230-a663-gpu-support-v9-2-186722e25387@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add gpu and gmu nodes for Lemans chipset. Also, add the speedbin
qfprom node and wire it up with GPU node.
Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251230-a663-gpu-support-v9-1-186722e25387@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To provide access to camera sensors a Rear Camera Card can be connected
to SM8650-HDK board, the camera sensors are:
* Samsung S5K33D ToF camera sensor, connected to CSI0 over MIPI D-PHY,
* Sony IMX766 Wide camera sensor, connected to CSI1 over MIPI C-PHY,
* Omnivision OV64B Ultrawide camera sensor, connected to CSI2 over MIPI C-PHY,
* Samsung S5KJN1 Tele camera sensor, connected to CSI3 over MIPI D-PHY).
Get the initial support of Samsung S5KJN1 camera sensor and two flash leds
on the Rear Camera Card board by adding a board overlay.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251204041505.131891-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support of Samsung S5KJN1 camera sensor connected to CSIPHY3 over
MIPI D-PHY interface.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20251204041505.131891-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add fixed MCLK pin descriptions for all pins with such supported
function.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251204041505.131891-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add Qualcomm SM8650 CAMSS device tree node to the platform dtsi file,
the SM8650 CAMSS IP contains
* 6 x CSIPHY,
* 3 x CSID, 2 x CSID Lite,
* 3 x IFE, 2 x IFE Lite.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20251204041505.131891-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add TLMM 120 for hdmi bridge enable.
In general this is the same setup as on the T14s. Since its using simple-bridge
and also is Lenovo, we also use the same realtek,rtd2171 compatible.
The real chip identity is not known yet. The bridge is wired with un-swapped
lanes, though.
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20260103-tb16-hdmi-v2-2-92b0930fa82e@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The usb_1_ss2 complex has 2 phys, usb_1_ss2_hsphy and usb_1_ss2_qmpphy. On this
laptop, they are used for different peripherals: The hsphy for the fingerprint
reader, the qmpphy to drive a hdmi bridge. The normal logical wiring for the dwc3
controller is to both phys. Delete the port@1 to the qmpphy.
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260103-tb16-hdmi-v2-1-92b0930fa82e@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The recent dt-bindings were updated for the missing RX/TX symbol clocks
for UFS.
Extend the existing list to make sure the DT contains the expected
amount of 'clocks' entries.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260103-ufs_symbol_clk-v2-3-51828cc76236@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the addition of UFS PHY clocks to the Hamoa GCC binding through a
topic branch, to avoid DeviceTree validation warnings, and later allow
referencing the added clock constants.
Add some of the UFS symbol rx/tx muxes were not initially described.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260103-ufs_symbol_clk-v2-1-51828cc76236@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial support for Qualcomm Kaanapali QRD board which enables
SD Card, UFS and booting to shell with UART console.
Written with help from Jishnu Prakash (added RPMhPD nodes), Nitin Rawat
(added ufs) and Manish Pandey (added SD Card).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-5-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial support for Qualcomm Kaanapali MTP board which enables PCIe,
SD Card, UFS and booting to shell with UART console.
Written with help from Jishnu Prakash (added RPMhPD nodes), Nitin Rawat
(added UFS), Manish Pandey (added SD Card) and Qiang Yu (added PCIe).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-4-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Physical client IDs are used on Glymur Inter Process Communication
Controller (IPCC), add a corresponding header file.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251031-knp-ipcc-v3-3-62ffb4168dff@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On earlier platforms, Inter Process Communication Controller (IPCC) used
virtual client IDs and performed virtual-to-physical mapping in hardware,
so the IDs defined in dt-bindings/mailbox/qcom-ipcc.h are common across
platforms. Physical client IDs instead of virtual client IDs are used for
qcom new platforms like Kaanapali, which will be parsed by the devicetree
and passed to hardware to use Physical client IDs directly. Since physical
client IDs could vary across platforms, add a corresponding header file
for the Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251031-knp-ipcc-v3-2-62ffb4168dff@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Kaanapali SoC binding and the boards which use it.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-1-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce new binding for the Medion SPRCHRGD 14 S1 notebook with
X1E78100 SoC.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251204155212.230058-5-ggo@tuxedocomputers.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce new binding for the TUXEDO Elite 14 Gen1 laptop with X1E78100
SoC.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20251204155212.230058-3-ggo@tuxedocomputers.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
TUXEDO Computers GmbH is a German supplier for computers.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251204155212.230058-2-ggo@tuxedocomputers.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On X Elite, there is a crypto engine IP block similar to ones found on
SM8x50 platforms.
Describe the crypto engine and its BAM.
Tested-by: Wenjia Zhang <wenjia.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251211-crypto_dt_node_x1e80100-v6-1-03830ed53352@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaT4RWBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIVfSgEA23oY0kPjLLkNj4KAjLoWVPmZ/5efKw49
m6YUwfvzTS8BAIq4eFHVecwAM8FAe9NwuOKgO5d9u6epAy6wzBeP2jly
=cpHq
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmk8YxITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi702B/9Mfj0HQSAaWCyMz6GJAv8+1ijVTSbG
nTFeMmipYZhPn188OvWqHsf1cw9rWY0fzenIEW05Tk3YmMvYdeRmCcOkZdeG06xw
um8XxX4L8315E0b98CCpQpVa02ux7XoNtBPjeHccl8PEErJQgQJrQ3Cc/C8kk5U5
a0KlfeVRXYWkOPJva3+wosOu0t9QgJ9ABt5stqcvYDfdkKfvatQMBN3N1nNRKkFH
yhNPv+nRtypSk8jiHhKeeCVmosC0L7MnKuO593vDr761cY5mKrgKFqc2LLlPF6r0
/p13s5SG6X38RUegWCjcK4XRJAzVcR/tyod8LkVVp8d5DC/ptcyy8H+I
=h1gC
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jbkd
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTsgBwAKCRDdBJ7gKXxA
jkSIAP4jD66nEC2QyKTiv9XvXi8rpKz6RGAHNZSam0ucI5WKswEAoflmlqsoD/Kk
sN3YLwLztzCJIYU7tT3IRaPK0irwDAo=
=nkux
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
- The 2 patch series "powerpc/pseries/cmm: two smaller fixes" from David
Hildenbrand fixes a couple of minor things in ppc land.
- The 4 patch series "Improve folio split related functions" from Zi Yan
provides some cleanups and minorish fixes in the folio splitting code.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTseCwAKCRDdBJ7gKXxA
jkCLAP9ttvtG7zhDf+tqvjCJFnybPEo6Z2B4Qx9g8i7s27gTZgD8DzYbIl+YdxrN
/tS0tdgUfrJIXR2PzzipkydNrs+lxgg=
=T65o
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "powerpc/pseries/cmm: two smaller fixes" (David Hildenbrand)
fixes a couple of minor things in ppc land
- "Improve folio split related functions" (Zi Yan)
some cleanups and minorish fixes in the folio splitting code
* tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/tests/core-kunit: avoid damos_test_commit stack warning
mm: vmscan: correct nr_requested tracing in scan_folios
MAINTAINERS: add idr core-api doc file to XARRAY
mm/hugetlb: fix incorrect error return from hugetlb_reserve_pages()
mm: fix CONFIG_STACK_GROWSUP typo in mm.h
mm/huge_memory: fix folio split stats counting
mm/huge_memory: make min_order_for_split() always return an order
mm/huge_memory: replace can_split_folio() with direct refcount calculation
mm/huge_memory: change folio_split_supported() to folio_check_splittable()
mm/sparse: fix sparse_vmemmap_init_nid_early definition without CONFIG_SPARSEMEM
powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages
powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: 011703a9ac ("file: add FD_{ADD,PREPARE}()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Fixes: 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core:
- revert dumb bo 8 byte alignment
amdgpu:
- SI fix
- DC reduce stack usage
- HDMI fixes
- VCN 4.0.5 fix
- DP MST fix
- DC memory allocation fix
amdkfd:
- SVM fix
- Trap handler fix
- VGPR fixes for GC 11.5
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling
-----BEGIN PGP SIGNATURE-----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=/78c
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for what is in next tree, mostly amdgpu and
some i915, panthor and a core revert.
core:
- revert dumb bo 8 byte alignment
amdgpu:
- SI fix
- DC reduce stack usage
- HDMI fixes
- VCN 4.0.5 fix
- DP MST fix
- DC memory allocation fix
amdkfd:
- SVM fix
- Trap handler fix
- VGPR fixes for GC 11.5
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Subsystem:
- remove .priv_xfers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmk8nscACgkQY6TcMGxw
OjL+1Q//Tg2EpJZPRjJaCjf9ohjcrgyFtse+5qeCypnRYFVD3Oy6r3AkiuacJ8jG
ufQ8V03JTsOIH+BcyGgQgyDWEplcqFdoJPVpdiuJGYMSj8if3g7pUQFFbrzEGum2
mMRcrvidhCgGVpUYVmIAUxx7anf9bR4Tuq5q9ZZ1gexxjyMJ+sEiLHpTDfuxRfB+
JIiaDfHEWAzMdVjwtVX0+BidDlhdj4ioY7BJAh/6Zj5dcw1M3zbSBu/Vfj3+jgvj
TBwV3MEd69t4uofnbh2OZ6YmH2+HrBDafPBIRmWxlU/qFcdSZBLsJE5mrWIhVfur
mC0vNXF2C/ShFs5DNStCkBqNs8n2Gtv+8IwT1FnPOlzgya8pyphIl1x9uJcGdPBG
k6GxIRAQHuWvYZEOS+X/rN4P9itKCVab2Z4Yo3Kwd2au4KXp6lZ7cSsVXgDz5QrU
fXAXKtizc6Oz2ebU8r88Wh5G/oUeffOf2xls/nZ9gVVXdSNpx7Ehy9N5IbQou7dF
doFOtWdascK5rmnjCowTwHSug+Jl9K8w0IzaF8w+lLPBo0twru0kFqgWLAc7lj+v
hVzE6JHtnR4hth+sf5oynUwfjtZYT7nGoQnCSBUlr6f6UAOUQTT+TTqoyXOMxiqh
5PeeuK78QFcWRdjPeb1JX2mRk3Kj2oMFlmGpk8IQGY4U/zdVr3o=
=tZor
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
